ed co., ltd
TRANSCRIPT
Electric & Electronic Measuring Device,Automatic Control55 ANIVYS CO., LTD. 234 ~ 237
AONE Technology Co., Ltd. 238 ~ 239CHUNGPA EMT CO., LTD. 240 ~ 249ED CO., LTD. 250 ~ 251FESTECH CO., LTD. 252 ~ 255FESTOONE CO., LTD. 256 ~ 257Hanback Electronics Co., Ltd. 258 ~ 259IEG Co., Ltd. 260 ~ 263KTENG 264 ~ 271ROBOROBO Co., Ltd. 272 ~ 273WOOSUN CONTROL CO., LTD. 274 ~ 279
234
Electric & Electronic Measuring Device, Automatic Control
ANIVYS CO., LTD.ANIVYS CO., LTD.
Pneumatic training system
Pneumatic basic training set (AVP-P-P11)Pneumatic advanced training set (AVP-P-P12)Electro-pneumatic basic training set (AVP-P-E21)Electro-pneumatic advanced training set (AVP-P-E22) Patent acquired horizontal & vertical installable 2-way clamp SMC compartment & 4mm safety socket adopted
- Basic principle and physical fundamentals of pneumatics- Fundamentals and terminology of pneumatic control technology- Programmed control with a sequencer- Assembly of controls with relays- Design & function of electric sensors
Training contents
Hydraulic training system
Hydraulic basic training set (AVP-H-P51)Hydraulic advanced training set (AVP-H-P52)Electro-hydraulic basic training set (AVP-H-E61)Electro-hydraulic advanced training set (AVP-H-E62)Proportional hydraulic training set (AVP-H-C71)Servo-hydraulic training set (AVP-H-S73)Patent acquired horizontal & vertical installable 2-way clamp Safety socket adopted
- Physical principle of hydraulics- Structure, function and application of hydraulic actuators & components- Composition and drawing electrical and hydraulic control circuits- Recording characteristics for the proportional discharge valve- Setup of a control circuit with setting of control quality, empirical parameterization
Training contents
Address : 10th FL. #A-1005-GaHo,Gasan Digital 1st 131,Geumcheon-gu,Seoul,KoreaHomepage : www.anivys.com 235
Electric & Electronic Measuring Device, Automatic Control
Portable electro-pneumatic training set NEW RELEASE
PLC training set
Compact & portable electro-pneumatic training set
* Custom-made ‘Portable (Suitcase-type) FA Application training systems’ are available.
Relay type
Item Q’ty Item Q’tyDouble cylinder (with magnetic s/w) 2ea Double cylinder 2eaRegulator 1ea Relay 3eaElectrical Limit switch (right & left) 2set Push button switch set 2eaInductive sensor module 1set Power supply 1ea5/2 solenoid valve (4-fold) 1set Proximity sensor module 1ea5/2 double solenoid valve (4-fold) 1set Digital counter 1eaSuit type case (with profile) 1ea Time delay 1eaCable set (2mm) 1set Hose set (20M) 1set* PLC unit (for PLC type) 1set
PLC type (with any compact type PLC)
Ideal control system for various FA application devicesWith 4mm safe socketCustom-made for all kinds of PLC
Training contents
236
Electric & Electronic Measuring Device, Automatic Control
ANIVYS CO., LTD.ANIVYS CO., LTD.
Multi-Function PLC trainer (AV-MT-P1000)
Modular product system (MPS)
Mobile Robot (AV-MRP3MV4)
Independent type PLC trainer4mm safety socketWide compatibility with various block type compact PLCAdjustable angleSelectable function modules
Actual training for production, automation and controlControlled by various devices as like PLC, PC or softwareCustomer-made combinations between the stations:Distributing station Robot stationTesting station Assembly stationProcessing station Punching stationHandling station Separating stationBuffer station Storing stationPick & Place station Sorting station
Microprocessor control autonomous mobile robot platformis complete learning system of micom system design and Cprogramming with a round and rigid steel frame, threeomnidirectional drive units and comprehensive workbook.
- 3dof open type mobile service robot platform- Color sensing camera - Mobile hard case- Battery charger - Basic tools and brackets- Training workbook and CD
Composed of
Address : 10th FL. #A-1005-GaHo,Gasan Digital 1st 131,Geumcheon-gu,Seoul,KoreaHomepage : www.anivys.com 237
Electric & Electronic Measuring Device, Automatic Control
rCube-Mobile Robot AV-RC-MR110
- Complex experiment ofelectronic circuit and digital logiccircuit
- Simulation function with USBDAQ
- USB Oscilloscope - Experiment without additional
measuring equipment
- Practicing circuit implementationthrough breadboard andelectronic circuit module
- Simulation function with USBDAQ
- USB Oscilloscope - Experiment without additional
measuring equipment
bCube-Analog Circuit AV-BC-AC210 bCube-Digital Logic Circuit AV-BC-LC220
- Android Jelly Bean 4.2.2, LinuxKernel 3.4.39
- 10.1 Inch, 1280x800 LCD
- Practice making of Androidapplication
- Experiment platform for AM,FM, ASK, FSK, PCM, TDM,optical communication andwire/wireless communication
- Wire/wireless modem, datatransfer, application tests
- Analog/digital signal generatorand measuring instrument
bCube-FPGAAV-BC-FG250 bCube-CommunicationAV-BC-CC240
- Complex experiment ofelectronic circuit and digitallogic circuit
- Simulation function with USBDAQ
- USB Oscilloscope - Experiment without additional
measuring equipment
- Available selection betweenAVR, Cortex-M4, 8051Processor
- Simulation S/W through USB- Supply needed education
themes for microprocessorpractice
eCube-Exynos 4412 AV-EC-EN110 mCube-Microprocessor AV-MC-MC310
- Wireless mobile robot trainer- Voice recognition robot control through Wi-Fi function from smart device- Extension connector for sensors- Independent processor for sensors- Control mobile robot body and independent communication processor- Easy to change the wheel size (65mm, 90mm, 110mm, 130mm)
238
Electric & Electronic Measuring Device, Automatic Control
AONE Technology Co., LtdAONE Technology Co., Ltd
Mechatronics trainer CT6200
Delta-robot trainer RT1100
PLC trainer(portable type) CT3200
Mechatronics is complex field of automation technology.Mechatronics trainer from AONE technology is composed of variousFA devices. 4mm safety plug and sockets are adapted for electricalconnection
PLC moduleHMI touch panelData control & DC motor control modulePC-based control EtherCAT moduleMini automation trainer(above modules are selectable)
Main components
Delta-robot trainer is controlled by TwinCAT which is the worldfamous PC-based control software made by Beckhoff Germany.EtherCAT industrial network technology is adapted for datacommunication between robot and control PC
PC interface module(EtherCAT)Supply unitConveyor unitSensor unitDelta-robot unitPallet unit
Main components
AONE technology is developing PLC trainer which is composed ofvarious components demand on customers. 4mm safety plug andsockets are adapted for electrical connection.
PLC (model: on demand)DC Power supplyPush-button & toggle switchLED lampsdigital switch(2-digit)FND display(2-digit)DC motor control
Main components
239
Electric & Electronic Measuring Device, Automatic Control
Pneumatic/Hydraulic trainer AT1000 / AT2000
Address : #1105, Mecha-zone, SK-technopark, 50, Wanam-road, Sungsan-gu, Changwon-city, Gyeongsangnam-do, KoreaHomepage : www.aonetechnology.kr
Motion trainer(AC Servo) MT7300
PLC trainer(desktop type) CT3400
Pneumatic & hydraulic trainer is composed of various parts toexperiment a lot of pneumatic and hydraulic circuits. Everycomponents have push-clamp for convenient attachment anddemounting
Basic pneumaticsAdvanced pneumaticsElectro-pneumaticsBasic hydraulicsAdvanced hydraulicsElectro-hydraulicsProportional/Servo hydraulics
List of trainer packages
Motion trainer is normally used for intermediate or advanced level ofPLC training course. With 2-axis 100W AC servo motor and airgripper, you can experiment various working scenario.
2-axis cartesian robot100W AC servo motor and driveair cylinder for Z-axisair gripper for end effectorair service unitDC power supplypush-button switch unit
Main components
AONE technology is developing PLC trainer which is composed ofvarious components demand on customers. 4mm safety plug andsockets are adapted for electrical connection.
PLC (model: on demand)DC Power supplyPush-button & toggle switchLED lampsdigital switch(2-digit)FND display(2-digit)DC motor controlTraffic signal simulator
Main components
240
Electric & Electronic Measuring Device, Automatic Control
CHUNGPA EMT CO., LTD.CHUNGPA EMT CO., LTD. Address : No.906, Daeryung Technotown 6th, 648, Seobusaet-gil, Geumcheon-gu, Seoul, KoreaHomepage : www.chungpaemt.co.kr 241
Electric & Electronic Measuring Device, Automatic Control
242
Electric & Electronic Measuring Device, Automatic Control
CHUNGPA EMT CO., LTD.CHUNGPA EMT CO., LTD. Address : No.906, Daeryung Technotown 6th, 648, Seobusaet-gil, Geumcheon-gu, Seoul, KoreaHomepage : www.chungpaemt.co.kr 243
Electric & Electronic Measuring Device, Automatic Control
244
Electric & Electronic Measuring Device, Automatic Control
CHUNGPA EMT CO., LTD.CHUNGPA EMT CO., LTD. Address : No.906, Daeryung Technotown 6th, 648, Seobusaet-gil, Geumcheon-gu, Seoul, KoreaHomepage : www.chungpaemt.co.kr 245
Electric & Electronic Measuring Device, Automatic Control
246
Electric & Electronic Measuring Device, Automatic Control
CHUNGPA EMT CO., LTD.CHUNGPA EMT CO., LTD. Address : No.906, Daeryung Technotown 6th, 648, Seobusaet-gil, Geumcheon-gu, Seoul, KoreaHomepage : www.chungpaemt.co.kr 247
Electric & Electronic Measuring Device, Automatic Control
248
Electric & Electronic Measuring Device, Automatic Control
CHUNGPA EMT CO., LTD.CHUNGPA EMT CO., LTD. Address : No.906, Daeryung Technotown 6th, 648, Seobusaet-gil, Geumcheon-gu, Seoul, KoreaHomepage : www.chungpaemt.co.kr 249
Electric & Electronic Measuring Device, Automatic Control
250
Electric & Electronic Measuring Device, Automatic Control
ED CO., LTD.ED CO., LTD.
MULTI-PURPOSEENGINEERING TRAINER
PC-BASED POWERELECTRONICS TRAINER
PC-BASED DIGITALCOMMUNICATION TRAINER
SENSOR APPLICATIONTRAINER
EED-2110 ED-1430 ED-1440 ED-6830
NEW&RENEWABLE ENERGYTRAINER
NEW&RENEWABLE ENERGYTRAINER
LED(LIGHT EMITTINGDIODE) LAMP TRAINER
LED TRAINER(MODULAR TYPE)
ED-9710 ED-9720 ED-9810 ED-9820
Renewable Energy & LED
Electricals/Electronics/Sensor
Address : 14, Dunchon-daero 457beon-gil, Jungwon-gu, Seongnam-si, Gyeonggi-do, KoreaHomepage : www.ed.co.kr 251
Electric & Electronic Measuring Device, Automatic Control
6.2GHz SPECTRUM ANALYZER COMBO TESTER ANTENNA TRAINER MICROSTRIP LINE TRAINERPSA-6000 ED-4770 ED-3200 ED-3300
Communication / Test & Measurement
Intelligent Robot&Simulation
INTELLIGENT EDUCATIONROBOT PLATFORM
5-AXIS ARM ROBOT TRAINER ROBOT ASSEMBLY KITTRAINER
INTELLIGENT ROBOTDEVELOPMENT KIT
ED-7270 EED-7255 ED-7271 ED-7273
Simulation Software
ROBOT CONTROLSIMULATION SOFTWARE
PNEUMATICS & HYDRAULICSSIMULATION SOFTWARE
SIMULATION SOFTWARE PRO-GRAMMABLE LOGIC CONTROLLER
ELECTRONIC SEQUENCE CON-TROL SIMULATION SOFTWARE
E D S - E D R S EDS-PHLego PPlus EDS-SimPL EDS-ESS
Mechatronics & FA Pneumatics/Hydraulics
UNIVERSAL PLC TRAINER COMPUTER-INTEGRATEDMANUFACTURING TRAINER
PNEUMATICS TRAINER HYDRAULICS TRAINER
E D - U P L C ED-CIM ED-7860 ED-7960
252
Electric & Electronic Measuring Device, Automatic Control
FESTECH CO., LTD. FESTECH CO., LTD.
Pneumatics training setFP-100 series
Hydraulics training setFH-100 series
Sensors training setFS-100 series
The pneumatics training set is composed of various industrialpneumatic parts. All the parts are adopted one-touch mounting clampso that users can easily attach it and make a pneumatic circuit.Pneumatic training package is consist of FP101, FP102, FP201 andFP202.FP101 is for basic level of pneumatics and FP102 is for advancedlevel. FP201 and FP202 are electro-pneumatic training packages.FP201 is for basic level and FP202 is for advanced level.
The hydraulics training set is composed of various industrialhydraulic parts. All the parts are adopted one-touch mounting clampso that users can easily attach it and make a hydraulic circuit.Hydraulic training package is consist of FH101, FH102, FH201 andFH202.FH101 is for basic level of hydraulics and FH102 is for advancedlevel. FH201 and FH202 are electro-hydraulic training packages.FH201 is for basic level and FH202 is for advanced level.
Sensor training package is consist of FS110, FS120, FS130.FS110 is Poximity Sensors training packages. The equipment set FS110 offers comprehensive training on the topic of proximity sensors.FS120 is sensors for distance and displacement. FS130 is sensors forforce and pressure. The equipment set FS130 uses force and pressuresensors with an analog output. The output signals of the analogsensors are measured with a digital multimeter.
PTP robotFATK series
Motion Control TrainerFATK series
253
Electric & Electronic Measuring Device, Automatic Control
MASFATK series
Address : Rm 706, Daeryung Technotown 5, 632, Seobusaet-gil, Geumcheon-gu, Seoul, KoreaHomepage : www.festech.co.kr
Each module has a mounting clamp Variable module combination Open structure for practical training 4mm standard electric socket
Distribution module Drill motor moduleTransfer cylinder module Sensor test moduleConveyor module Ejecting moduleTower lamp module I/O control moduleSolenoid valve & relay module
FEATURES
FEATURES
FEATURES
COMPONENTS
Pneumatic transfer and sorting systemReal industrial partsBasic and advanced trainingOpen structure for practical trainingControl module for Auto/Manual4mm standard electric socket
Distribution moduleConveyor modulePTP robot moduleSensor unitSort & storing moduleControl module
MAIN COMPONENTS
2 axes servo motor system Linear spindle drive typePneumatic hand gripper for workpiece handlingBasic and advanced trainingOpen structure for practical training
Linear spindle drive modulePneumatic gripper module with double-acting cylinderServo drive and PLCI/O control moduleGraphic touch panel (option)
MAIN COMPONENTS
254
Electric & Electronic Measuring Device, Automatic Control
FESTECH CO., LTD. FESTECH CO., LTD.
VMS (Variable Mechatronics System)
Work Plan Assembling Machines and Systems ProgrammingControl and Operation Maintenance Troubleshooting
VMS includes processes with different operating conditions and scenarios. A variety of configurations and combinations of processes are available to meetthe user’s needs. It is possible to customize the practice equipment from module and a single process to the integrated processes.
< Example of processes >Distribution : Sequentially distributes the workpieces stored in a magazine.Testing : Determines the material, color and height of workpieces.Processing : Uses a rotary index table to process the workpieces, and test the processing condition.Handling : Pneumatic actuators arranged on orthogonal axis delivers the workpieces to the next process.Buffer : Controls the flow of workpieces for a flexible operation between the stations based on the waiting time and operating time.Sorting and storing : Sorts and stores the workpieces into slider or warehouse based on the information of workpieces.
VMS is a basic step to learn the advanced technologiesfor the FMS, and a training equipment to develop themechatronics experts. VMS consists of modulecomponents, so as to be used for the practice ofassembly/disassembly. VMS is expandable equipmentthat allows the trainees realistically simulating theindustrial field increasingly complicated. VMS allows the reconfiguration of process and systemin steps from a simple and basic operation to thecomplicated operation to suit the ability of trainees. Avariety of workplace practices in the production system,including design, assembly, programming, operation,maintenance and repair, are available in VMS.In addition to the expertise of mechatronics, VMSprovides the system to develop a project basedintegrated personal abilities, including teamwork,cooperation, education, unique design andcomprehensive analysis.
Training purpose
Variable processes
VMS Scenarios
(1) (2) (3)
(4) (5) (6)
Address : Rm 706, Daeryung Technotown 5, 632, Seobusaet-gil, Geumcheon-gu, Seoul, KoreaHomepage : www.festech.co.kr 255
Electric & Electronic Measuring Device, Automatic Control
MPS (Modular Product System)MPS was developed for actual training of production field technology and automation system.Not only theoretical knowledge but also practical technology for system designing, making, operating and maintenance is mastered with this training set.MPS is composed of various modules for easy separating, assembling and maintenance.It is possible to obtain overall knowledge of electro-pneumatics, control engineering, sensor and mechatronics.
Various stations Industrial parts and practical connection Selectable controller High compatibility and expansionCustomer order made solution Creative project for apprentices Easy combine with robot controller
Distribution unitSensor & conveyor unitHandling unit
Storage unit for stepping motor Solenoid valve unitI/O control module
Simulation system for production DC motor and belt conveyor Stepping motor drive
Various industrial sensorsBasic and advanced trainingOpen structure for practical training
FEATURES
FEATURES Main Components
MMPS (Mini Multi Programming System)
MPS-9 StationsCombination of stations
FATK series
There are 9 stations which can becombined each other.Basically all the parts on thestation are completely fixed andelectrically wired.
Example of combinationD + T + PD + T + SD + T + P + HD + T + P + H + BD + T + P + H + B + RD + T + P + H + B + R + SD + T + P + H + B + R + S + P + A
Distributes a source materialfrom its magazine
DistributionD
Tests material and status ofwork-piece with sensors
TestingT
Makes a drill hole and test iton rotary index table
ProcessingP
Transfers the work-piece intoanother place with a rotary cylinder
HandlingH
Delays time for sequentialprocessing
BufferingB
Assembles and handleswork-piece
RobotR
Sorts and stores work-pieceaccording to product data
SortingS
Press and distribute work-piece cap
PressingPr
Distribute cylinder piston &spring from storage rack
AS/RSA
D T P H B R SP A
Standard model (ON:25036) New-Basic model (ON:25037) New-Advanced model (ON:25038)
256
Electric & Electronic Measuring Device, Automatic Control
FESTOONE CO., LTD.FESTOONE CO., LTD.
Pneumatics System Training Kit
Hydraulics System Training Kit
Hydraulics System Training Kit enables combining theory and practice of Hydraulics.This kit provides sufficient training from basic knowledge and applies knowledge of Hydraulics as well as PLC education. Work station, whichis biotechnologically designed and the combination of aluminum profile provides ONE-STOP education environment for various automationtests. Hydraulics system training kit is consist of FOHY501 and FOHY502.FOHY501 is for basic level for hydraulics and FOHY502 is for basic level of Electric hydraulics.
FEATURE
FEATUREPneumatics System Training Kit enables combining theory and practice of Pneumatics.This kit provides sufficient training from basic knowledge and applies knowledge of Pneumatics as well as PLC education. Work station, whichis biotechnologically designed and the combination of aluminum profile provides ONE-STOP education environment for various automationtests. Pneumatic training kit is consist of FOPn101, FOPn102, FOPn201, FOPn202, FOPn301, FOPn302, FOPn401 and FOPn402.FOPn101 is for basic level of pneumatics and FOPn102 is for advanced level.FOPn201 is for basic level of Electric pneumatics and FOPn202 is for advanced level.FOPn301 is for pneumatic compact level and FOPn302 is for electric pneumatic compact level.FOPn401 is for Mobile pneumatic system and FOPn402 is for Mobile electric pneumatic system.
Address : #1305, Byeoksan Digital Valley 2 Cha, 184, Gasan digital 2-ro, Geumcheon-gu, Seoul, KoreaHomepage : www.festoone.co.kr 257
Electric & Electronic Measuring Device, Automatic Control
PLC Training Kit
Production Automatic System Training Kit
Motor System Training Kit
This kit increases the efficiency of distribution management, such asdealing & keeping distribution and unloading. Also, it can be appliedin production management system and material management system.This kit can be designed and constructed according to the needs of theuser.
FEATURE
Motor System Training Kit, which used Servo Motor or SteppingMotor is an automation kit. By acquiring the mechanism of the motor,this kit enables keen location control and speed control by using themost used parts in the actual industry.
FEATURE
All the PLC practical equipments of FESTOONE are designed to enhance the training effects for both theory and actual performance with userfriendly manufacture of diverse on-market products.able to select&combine the proper control module in accordance with the training target.Variable utilization with compatible combination for the environment of the diverse automatic practical equipments and training mechatronicssuch as electric, pneumatic control, etc.easy&simple connection by using of 4mm banana jack for all the wiring of equipments.able to reduce the practice time with easy attachment/detachment to the profile system by applying the one-touch clamp device to PLC practicalequipment. PLC training kit is consist of SIEMENS PLC(F.O-SIME32), MITSUBISHI PLC(F.O-MPU16), PLC Touch screen system(F.O-MP.TK300), PLC motor system(F.O-MP.TK400), Module-type PLC(F.O-GP.FD-32) and Multi modular PLC(F.O-GP.TK200), etc.
FEATURE
F.O-MP.TK300
F.O-GP.TK200 F.O-GP.FD-32 F.O-MPU16(MITSUBISHI)
F.O-MP.TK400 F.O-SIME32(SIEMENS)
258
Electric & Electronic Measuring Device, Automatic Control
Hanback Electronics Co., Ltd.Hanback Electronics Co., Ltd.
Intelligent Robot System
Wireless Sensor Network & Optical Communication
FPGA / RFID / DSP Trainer
1. HBE-Robo-Ex : 2014 NewModular Design Basic Robotics Training Kit Available to connect each other with CAN/LIN
2. HBE-SmartCAR : 2014 NewIntelligent Mobile Robot Platform with Arduino2560
3. HBE-RoboCAR-Embedde :ARM Cortex A-8(SV210) based Embedded Systems based onReal Intelligent Robot Platform
4. HBE-RoboCAR : 4wheel Mobile Robot Platform with 8-bit microprocessor(ATmega128L)
5. HBE-RoboCAR-Vision : Real-Time Robot Image Processing (Acquisition, Tracing,Recognition) Training Kit
6. HBE-RoboCAR-ARM : Servo motor control training using six joint arm withRoboCAR
7. HBE-ROBONOVA-AI :Intelligent two-legs walking robot with 32bit embedded board,CCD camera.
1. HBE-ZigbeX :Ubiquitous Sensor Network(USN) Training Kit basedTinyOS 2.x
2. HBE-Ubi-HomeNet :New Ubiquitous Home Network Test-beds based onWireless Sensor Networks
3. HBE-Ubi-House :The Applications Platform of Home Network
4. HBE-Ubi-Box :Base station for wireless sensor network
5. HBE-OPT-303Optical Communication TrainerLight Source (1310/1550/650nm), Including Dual OpticalReceiver, Optical Power Meter and Digital Oscilloscope
1. HBE-COMBO II-DLD (2014 New)FPGA(ALTERA Cyclone IV / XILINX Spartan 6) Device design training kit
2. HBE-RFID-REX :RFID(Radio Frequency Identification)Training platform
3. HBE-DSPLAB :TMS320F28335 DSP(Digital Signal Processing) Trainer
7. HBE-ROBONOVA-AI
3. HBE-RoboCAR-Embedded 4. HBE-RoboCAR
5. HBE-RoboCAR-Vision 6. HBE-RoboCAR-Arm
1. HBE-ZigbeX 2. HBE-Ubi-HomeNet
4. HBE-Ubi-Box 5. HBE-OPT-303
3. HBE-Ubi-House
1. HBE-COMBO -DLD 2. HBE-RFID-REX 3. HBE-DSPLAB
1. HBE-Robo-Ex2. HBE-SmartCAR
Address : 35, Daehak-ro, 76beonan-gil, Yuseong-gu, Daejeon, KoreaHomepage : www.hanback.com 259
Electric & Electronic Measuring Device, Automatic Control
LED Experiment System Embedded/Android System
Green IT Experiment System
Electric & Electronics Experiment
Sensor & Microprocessor Traine
HBE-Green-EnergyNew Energy and RenewableEnergy Integrated testPlatform
HBE-Green-HomeNetGreen Home Test & Monitoring Platform with Smart Meterapplying Photovoltaic Power Generation and USN
HBE-Green-ETS-SolarIt is composed of modules by function blocks both Stand aloneSystem and Grid connected System. We can do Monitoring test usingUSN and PLC and test Consumption part through Load Devices.
HBE-Green-LEDBasic LED training Platform
HBE-LED-LightingSmart LED Lighting Platform(Panel & Bag type)
HBE-B3E-SE (2014 New)PC-based Electrical &Electronic circuitsintegrated lab Kit
HBE-Comm (2014 New)Modular basic Analog &Digital CommunicationTraining Kit
HBE-LogicCircuit-DigitalModular Digital logiccircuits Experiment kit
HBE-Electronic CircuitModular basic ElectronicCircuit Experiment Kit
HBE-LogicLAB-DBasic Digital logic circuitsExperiment kit
HBE-Sensor-Multipracticing application of varioussensors
HBE-SM7-S4412 (2014 New)Quad-core(Samsung Exynos 4412) Embedded/Android Training Platform :Standard Embedded/Android Trainer for 4 years Univ. in Korea
5 kinds of text books1. ARM Embedded System2. Android Application Programming3. Embedded Linux & APP based
System Bus (M3)4. Embedded Linux & APP based
direct control by process (M2)5. ADK-2560 Firmware & APP
HBE-Arduino-Sensor(2014 New)Support Arduino 1.05 versionSimple operation with ArduBlock(no programming experience)
HBE-MCU-MultiAVR/ 8051/PIC microprocessortrainer consist of various modulesfor convergence concept
HBE-MCU-AVR (2014 New)Low cost Basic 8 bit MCUTraining Kit based ATMELCPU(ATmega128A)
260
Electric & Electronic Measuring Device, Automatic Control
Advanced 6 Axis Multi-Joint Robot System TrainerIEG 2211
RobotStudio 5ABB Industrial
Software
FeaturesAdvanced 6 axis multi joint robot Training System provides the PEM fuel cell producing line by 6-axis multi joint robot.This system provides 6-axis multi joint robot with high performance robot controller, warehouse for storing covers of fuel cell, automaticconveyor belt with auto-feeder to feeding PEM fuel cell materials, fuel cell detecting sensor, fuel cell production line, finished productstorage, two auto changeable robot hands, and one auto changeable screw driver.All fences covered with transparency materials can surveillance the whole robot movement from all directions.Robot Studio software support pre-education before students using this advanced multi joint robot training system in practice, and very usefulto design more complex co-working robot systems. More useful industrial robots are provided in this software.
Address : 1107 & 1108 Tech-center SK(n)Techno-Park, 124 Sagimacgol-road, Jungwon-gu, Sungnam-city, Gyeonggi-do, South KOREAHomepage : www.ieg.pe.kr 261
Electric & Electronic Measuring Device, Automatic Control
Mechatronics System Certification TrainerIEG 3432
S M S C PSiemens
Mechatronics
Systems
Certification
Program
FeaturesThis is the equipment used to license SMSCP Level 1,2,3 of SIEMENS, Germany from which it is possible to learn electrical / mechanicalrequisite control technology, HMI control technology based on touch panels, analog sensor control technology, and pneumatic controltechnology.Practice equipment operation of 9 stations individually or in combination of more than 2 stations.Compose and practice DP Port-based Profibus PLC Network by applying Siemens S7-300 Series 314C-2DP model to each station.Understand and learn the mechanism through users' practice of hardware disassembling/assembling.Pellet transfer method based on conveyor logistics of the production system
262
Electric & Electronic Measuring Device, Automatic Control
Pneumatics System TrainerIEG 4000
Features# Basic Pneumatics# Electro Pneumatics# Advanced Electro Pneumatics
Suitable for education to improve an automation job ability based on realindustry fields and Certification Training Device relating to pneumaticSafer and faster composition of pneumatic circuits (V ertical and horizontalinstallation is possible) on a profile working board is available through a hand-lever fixing device with one-touch cam typeComposed with various electrical and electronic control units, all sorts ofsensors and pneumatic componentsComposed with a pneumatic automation system by basic and application stepsOne-Touch CAM type Hand Lever Clamping
Hydraulics System TrainerIEG 4100
Features# Basic Hydraulics# Electro Hydraulics# Advanced Electro Hydraulics
Continually providing various valves to an application set in order to experiencea basic practice on hydraulics and electro-hydrau lic and an additional practiceon a high-level application hydraulic system applied to automation fieldsSuitable for education to improve an automation job ability based on on-site andtraining device for Certification TestComposed with various electrical and electronic control units, all sorts ofsensors and hydraulic componentsComposed with a hydraulic automation system by each procedure, Basis,Application, Proportion, Servo ControlProviding a hydraulic simulation system for educationOne-Touch CAM type Hand Lever Clamp
- Common, Essential, Electro, Advanced, Advanced Electro -
Common, Essential, Electro, Advanced, Advanced Electro,Transparency -
Address : 1107 & 1108 Tech-center SK(n)Techno-Park, 124 Sagimacgol-road, Jungwon-gu, Sungnam-city, Gyeonggi-do, South KOREAHomepage : www.ieg.pe.kr 263
Electric & Electronic Measuring Device, Automatic Control
Electronics Application Trainer with NI ELVIS IEG 6310
264
Electric & Electronic Measuring Device, Automatic Control
KTENGKTENG
Hybrid power conversion experimental equipment
Renew able Electric Generating System
KTE-HB520
Wind power generation experimental equipmentKTE-7000WG
Solar power generation practice experiment equipmentKTE-7000ISG
Real wiring training kit connected with solar PV and wind power generatingsystemTest on wind power generation using a fanTest on the performance a of wind power generator using a motorConversion of DC power collected through power generation test equipment tohigh-voltage DC2-channel junction box capable of receiving up to 250VConfiguration of power generation systems such as solar PV generation testsystem and wind power generation test system into 2-channel hybridTest on power conversion without power generation test equipmentTest on grid connection which returns power to Electricity companyTest on capacity estimation depending on load capacityTest on circuit design such as inverter and Joint BoxAvailable in education and training of control programs such as inverter andJoint BoxSQ and PLC-based system remote control enabled
Real wiring training kit connected with wind power generating systemTest on wind power generation using a fanTest on performance of the wind power generator using a motorConversion of DC power which has been collected through the powergeneration test equipment to AC and high-voltage DC powerTest on power conversion without power generation test equipmentTest on grid connection which returns power to Electricity companyTest on capacity estimation depending on load capacityTest on circuit design such as inverter and Joint BoxAvailable in education and training of control programs such asinverter and Joint BoxSQ and PLC-based system remote control enabled
A photovoltaic power generation practice deviceA practice device with actual parts used in the photovoltaic powergeneration deviceStand-alone inverter systemGrid-connected inverter systemSequence controlCapacity calculation of system equipmentPractice of dual-axis tracking control
Address : 170, Munhyeongsan-gil, Opo-eup, Gwangju-si, Gyeonggi-do, 464-895, South KoreaHomepage : www.kteng.com 265
Electric & Electronic Measuring Device, Automatic Control
Hydrogen fuel cell experiment equipmentKTE-7000HS
Plasma artificial sun experimental equipmentKTE-7000P:L1K
Solar-hydrogen fuel cell experimental equipmentKTE-7000SH
Basic energy conversion process test and practiceEducation on solar cell module structure and operating principleMeasurement of power depending on lamp distance and intensity oflight sourcesPower generation test using solar PV at natural sunlight conditionsEducation on electricity generation principle and structure usingelectrolysis and hydrogenEducation on fuel cell stack structure and operating principle andoperating test on the load of LED and motorCollection of test data through data monitoring in each unit
This equipment is designed for consol-type, practice is availableanywhere if there is electric power.As a unit of fuel cell practice, basic characteristic experiment of fuelcell is practicable.This equipment is practicable to measure electric & thermal efficiencyof fuel cell This equipment is for understanding of fuel cell`s basic principle.This equipment is adjustable to generate hydrogen and oxygen.This equipment is practicable to control load and to practice the fuelcell`s performance.
An artificial sun testing device designed to provide similarperformance of photovoltaic energy for wide use in indoor tests forphotovoltaic power generation.Increased suitability for photovoltaic power generation test1KW plasma lampHeightened similarity to the light source of natural sun (colorrendition£æ80, color temperature > 7500K, luminous flux = 8500lm)Excellent suitability for indoor test by easier system configuration andsimple erection
266
Electric & Electronic Measuring Device, Automatic Control
New & Renewable energy real wiring training kitKTE-7000SQ
New & Renewable energy real wiring training KitKTE-7000PL
Electrical real wiring practice based on the past national technical license testPortable test equipment which will be available anywhere if power is availableComposition of connectors such as round connector and banana jack to saveconnection time at wiringSafe real wiring test and practice after adopting DC 24V input powerTest on power generation systems such as solar PV generation test system, windpower generation test system and tidal power generation system after configuringthem in 4-channel hybridControl of new & renewable energy generation test systems such as solar PVgeneration test system, wind power generation test system, tidal power generationsystem and hydrogen power generation system through electric wiringDisplay of measurements such as voltage, current and power on the touch screenand monitoring of power generation, inverter voltage, current and voltage ingraphs
Electrical real wiring practice based on the past national technical license testPortable test equipment which will be available anywhere if power is availableComposition of connectors such as round connector and banana jack to saveconnection time at wiringSafe real wiring test and practice after adopting DC 24V input powerTest on power generation systems such as solar PV generation test system, windpower generation test system and tidal power generation system after configuringthem in 4-channel hybridControl of new & renewable energy generation test systems such as solar PVgeneration test system, wind power generation test system, tidal power generationsystem and hydrogen power generation system through electric wiringDisplay of measurements such as voltage, current and power on the touch screenand monitoring of power generation, inverter voltage, current and voltage ingraphs
PVT performance measuring equipment KTE-7000PVT
A practice device of data acquisition & saving & control related toheat/electric generation using solar energy.A performance test of PVT heat collector using artificial sun & naturallight.A comparative experiment of heat/electric generation according toentrance temperature of PVT collector.Understanding of heat/electric generation principle using solar energyA various practice according to each load control.A operating characteristic experiment according to differential-temperature control of PVT collector`s entrance & exit
KTENGKTENG
Renew able Heat Energy System
Address : 170, Munhyeongsan-gil, Opo-eup, Gwangju-si, Gyeonggi-do, 464-895, South KoreaHomepage : www.kteng.com 267
Electric & Electronic Measuring Device, Automatic Control
Geothermal heat pump experimental equipmentKTE-7000GH
This equipment generates heat energy by vapor-condensing coolantwhile maintaining relatively constant temperature all the year round inground circulating circuit. It consists of ground circulating heat and coolant circuit. It is designed for test and practice on the composition of the systembased on the conventional vapor-compression cooling cycle andvarious basic automatic controls. It is also possible to experience the conversion of heating and coolingoperations using the 4-way valve.Test and practice of the 4-way valve control sequence circuitTest on forced geothermal heat pump using artificial groundEducation on the structure and principle of heat pump using geo-heatHeat pump performance depending on the burying method ofgeothermal exchanger
Solar heating hot water boiler experimental equipmentKTE-7000SB
Understanding of the collection, storage and control of heat,comparative test and practice after calculating heat by each loadthrough installation of three types of loadsTest on the performance of solar heat boiler using artificial and naturalsunsUnderstanding of the structure and operating principles of solar heatboilerTest under each condition using different load equipmentMeasurement of heat consumption by loadMeasurement of stored heat depending on the intensity of light sourcesusing artificial sunlightEducation on system control by controlling the system using thecontrol system
Solar radiation energy experimental equipmentKTE-7000SR
It is designed to test and practice the basic principles of solar radiation energy. In addition, a test can be carried out using both artificial and natural suns. The temperature in the inside of the insulation box can be kept at a constantlevel.Since materials with different emission rates are installed in the inside ofinsulation box with different angle of incidence, the efficiency of the test israised.Principle of collecting solar radiation energy using artificial and natural sunsMeasurement and comparative test of the emission rates in different materialsMeasurement of temperature distribution by point depending on angle ofincidenceMeasurement of temperature change in light sources by installing temperaturesensor on the slots of the halogen lamp which is used as light source at the useof artificial sunlightCalculation and comparative analysis of the amount of transmission ofradiation heat depending on the angle of incidence of solar PV
LED optical wireless communication practice equipmentKTE-LD220
268
Electric & Electronic Measuring Device, Automatic Control
KTENGKTENG
portable test equipment which will be available anywhere if power isavailableLED application technology practice, configurationCommunication status monitoring from the PCProgram design and practice of LEDLED Lighting device configuration and practice available
LED light source basic practice equipmentKTE-LD120
portable test equipment which will be available anywhere if there iselectric powerComposition of the LED devices practice moduleAvailable of LED drive methods and Luminous efficiency practiceCharacteristics practice of configuration depending on the type of LED
This equipment is used to measure the performance of solar heatwhich is used as the energy source for cooling and heating inarchitecture. It consists of artificial sun-related test equipment andbuilding miniature window shielding solar collector.Heat measurement test and practice depending on angle of incidenceand height of both artificial and natural sunsHeat test and practice depending on temperature at each point in theinside of insulation boxHeat comparative test depending on solar collectionHeat test depending on the replacement of solar collector
Solar energy saving system control equipmentKTE-7000SW
LED Light Source System
Address : 170, Munhyeongsan-gil, Opo-eup, Gwangju-si, Gyeonggi-do, 464-895, South KoreaHomepage : www.kteng.com 269
Electric & Electronic Measuring Device, Automatic Control
Evaporation pressure parallel control experimental equipmentKTE-2000EP
Air-conditioning unit automatic control equipmentKTE-1000AHU
Standard refrigeration experimental equipmentKTE-1000BA
Real-time temperature and pressure data viewReal-time temperature and pressure graph view Real-time temperature and pressure data view on the variety of refrigeration cycleReal-time enthalpy view on the temperature measuring point of the variety ofrefrigeration cycleRefrigerating efficiency, Heat equivalent of compression load, Emission heatquantity of condenser, Evaporating latent heat, Heat equivalent of flash gas, andTheoretical Coefficient Of Performance of the variety of refrigeration cycleAll data automatically can be saved intended every minute by interval data savingtimeAll data automatically can be saved in excel files Drawing Pressure-enthalpy Diagram with excel filed data by using refrigerationutilities
Basic Experiment of Standard Refrigeration system. Operating test for air-cooling of the refrigeration and freezing simulate easily.Performance test by changing pressure of the high pressure evaporator, whilekeeping temperature of the low pressure evaporator.Refrigerant distribution measuring test by changing temperature of the low andhigh pressure evaporator.Testing refrigerant distribution effect for the refrigeratorOperating test about variation of evaporating pressure by using the Evaporatorpressure regulator. (E.P.R)Proper refrigerant test about adjusting temperature of the low and hightemperature evaporator.Performance test by changing low pressure evaporator keeping high pressureevaporator.Pump down operating test for the low pressure evaporator keeping a pressure ofthe high temperature.
Cycle composition : Preheater - Precooler - Blower Humidifier - Reheater -Recooler - Control Volume - Outside. With controlling mount of air. Refrigerant : R-22. The chamber of air-conditioning trainer should be a controled and the duct isvisible so that an user can see inside of the trainer, also user can control thetemperature of inside and outside using amount of air.A experimental equipment can make understanding about air conditioning, and itcan draw the data acquisition, temperature and humidity from change of state inoperation of real time. It is possible for operation with making variable running circuit on control panel. It is possible for drawing psychrometric chart through temperature and humiditycontrol.Understanding about component part of air conditioner.Understanding of change process at psychrometric chart according to outdoor airtemperature and humidity conditionsIt is possible for drawing psychrometric chart according to air volume.It is possible for wiring to electrical units for sense of realism.
Refrigeration & Air-conditioning Energy System
270
Electric & Electronic Measuring Device, Automatic Control
KTENGKTENG
Refrigerant parallel expansion refrigeration experimental equipmentKTE-2000EV
4-Way reverse valve control heat pump heating & cooling experimental equipmentKTE-3000HD
Binary refrigeration experimental equipmentKTE-5000LT
Basic Experiment of Standard Refrigeration Trainer Operating test of air cooling and freezing.Performance comparing test for the proper refrigerant charging during the air-cooling or freezing operation. Variable expansion valve(Capillary tube, T.E.V, A.E.V) performance test aboutitem 3.Test for the air-cooling and freezing by decreasing or increasing capillary tubelength.Variable expansion valve(capillary tube, T.E.V, A.E.V) comparing test. Performance test by changing condensing temperature.Surveying compressor discharging temperature about refrigerant and degree ofsuperheat.Surveying degree of superheatFinding latent heat and sensible heat region on the evaporator coilDrawing Pressure-enthalpy diagram with excel filed data by using refrigerationutilities
Basic Experiment of Standard Refrigeration Trainer Changing refrigerant flow way by controlling 4-way reverse valve.Heating operating test by controlling 4-way reverse valve.Cooling operating test by controlling 4-way reverse valve. Heat efficiency rate analysis comparing other heat machine during heatingoperation.Heat efficiency rate test by changing heating loadEconomic analysis of electric heat pump comparing with other heat machine.Analysis of system effect by changing heating loadDrawing Pressure-enthalpy diagram with excel filed data by using refrigerationutilities.
Basic Experiment of Standard Refrigeration Trainer Low stage evaporating temperature test by changing temperature of high stagecondensing temperatureLow stage evaporating temperature test by changing temperature of high stageevaporating temperatureLow stage evaporating temperature test by changing temperature air-forcedheat exchangerTesting temperature variation about cascade temperature variableVariation test of low stage refrigeration system by changing chargingrefrigerantAnalysis temperature by controlling low stage evaporating pressureLow stage operating test by changing refrigerant(R-23, ethane)Drawing Pressure-enthalpy diagram with excel filed data by using refrigerationutilities
Address : 170, Munhyeongsan-gil, Opo-eup, Gwangju-si, Gyeonggi-do, 464-895, South KoreaHomepage : www.kteng.com 271
Electric & Electronic Measuring Device, Automatic Control
Air-conditioning & refrigeration wiring control training kitKTE-4000SQ
Brine refrigeration experimental equipmentKTE-6000BR
Air-conditioning & refrigeration PLC training kitKTE-4000PL
Basic Experiment of Standard Refrigeration Trainer Testing exchange rate evaporator cooling coil and brineTesting exchange rate water and brineAnalysis early evaporating loadTesting compression load, brine temperature, evaporator temperature and watertemperature as passing operationObserving melting and icing water Comparing of ice thermal storage capacity of industrial ice ball Testing heat capacity of a variety of brineDrawing Pressure-enthalpy diagram with excel filed data by using refrigerationutilities
Practicing to have performance test after making real wire.(But, the real wiretrainer should be connected with air-con. system, refrigeration system, freezingsystem, binary refrigeration system, and heat pump refrigeration system). Practicing to make basic circuit and practical circuit in wiring power, electricstep by step. Practicing to make circuit about that is controlled by every electric controlvalves as like magnet contactor switch(MC), relay(Ry), push buttenswitch(PB), select switch(S/SW), toggle switch(T/S), buzzer(BZ),timer(Timer), defrost timer(D.T), power lamp(PL),operation lamp(PL), stoplamp(GL) with several kind of circuits.
Basic programing of GM-WIN PLC- How to install GM-WIN program- How to use EDIT TOOL- How to make a LD program- How to make a sequence circuit.Control programming for refrigeration system- How to make a programming operation by temperature and pressure control- How to make a programming operation by pump down control- How to make a programming operation by hot-gas and defrost control- How to make a programming operation by electric defrost control
272
Electric & Electronic Measuring Device, Automatic Control
ROBOROBO Co., Ltd.ROBOROBO Co., Ltd.
RoboKit (No.1~ No.5)Educational Robot Kit
BeginnerCourse
[total : 12 robots]
IntermedlateCourse
[total : 12 robots]
AdvanceCourse
[total : 12 robots]
HIGH GRADECourse 1[total : 6 robots]
HIGH GRADECourse 2[total : 6 robots]
RoboKit series are an educational robot kit that can be applied from a primary school to a university Using various shapes of frames, sensor, and circuits, Children can assemble 12 robots at each level
Product : Robokit for each level(lv.1~lv.5), Workbook, Rogic programBuild 48 robots using five ROBOKIT series with software ROGIC.In the whole process of assembling & programming of your own robot, users can strengthen spartialperception, activate their brain and easily understand programing skill.Process : Design Build up the robot Programming Download Run
Step-by-step curricula : English Workbook 1 ~ 5 (For each level)Various illustrations and character for fun and efficient learningVarious examples for Self-learning
Graphic User Interface : Icon-based programming.Flowchart concept : Children can make a program just by drag-and-drop and they can easilyunderstand complex algorithm.Various function icon : Icons can be used as functions, variables and control statements such asWHILE, IF, BREAK, LOOP and so on.C-language Controllable : To improve the learning, higher grade students can program directly by C-language.
FEATURE
WORKBOOK
ROGIC PROGRAM
273
Electric & Electronic Measuring Device, Automatic Control
Robokids(No.1, No.2)Educational Robot Kit
Address : 5F Roborobo Bldg, 6, Dobong-ro 54-gil, Gangbuk-gu, Seoul, KoreaHomepage : www.roborobo.co.kr
Detailed product descriptionIt is important to form a good learning attitude from early childhood because children soak up knowledge like sponges in the period.ROBOROBO designs the Robotic kit called ROBOKIDS, intended for the children of 37~72 months who are too little to use 'Robokit',another ROBOROBO's robot series. While working out a way to assemble robots, children can activate their brain and develop the creativity.
Up to 16 robots can be assembled.(each kit, kids 1, 2)Kit for age of 5 to 7Learning period : 32 weeks Curriculum
<Assembling> <programming> <operating>
Block type kit : Easy to interlock and control.Various types of the part : CPU block, IR sensor block, touch sensor block etc 32 different robots by every chapter Teamwork and spatial perception can be improved throughout assembling process
Encourage children's imaginative play through characters and systematic episodesStory-telling situation in the illustration motivates children to make the robot naturally.
Using ROBOROBO's own card reader, children can program without a computer.There are many types of program cards called 'funny card'.Interesting robotic actions by only swiping the card Try to combine various funny cards and make various application motions.Various games can be set up.
PROGRAM
FEATURE
WORKBOOK
274
Electric & Electronic Measuring Device, Automatic Control
WOOSUN CONTROL CO., LTD.WOOSUN CONTROL CO., LTD.
1. New Renew able Energy(Solar & Wind Pow er) Educational Equipment
Solar Power Generation System WS-SGIC
It allows users to carry out experiments for stand-alone and grid-connectedsystem, the principle of street lamp and general energy conversion process. Grid-connected inverter is 200W and it converts DC voltage for 1 or 2 solarcells to 220V AC.
Solar Cell V-I Characteristic and Load ExperimentSolar Cell Boost Experiment Stand-alone Inverter Experiment Emergency Power Control Experiment Overcharge, Overdischarge Control Experiment Analog MPPT Control Experiment Solar Street lamp Experiment Solar Grid Connected Inverter Experiment
Feature
Experimental List
Wind & Solar Hybrid Generation System WS-SCS-1K
This trainer is designed to study characteristic and principle of hybrid(wind &solar generation) system. To boost a voltage, chopper is used and inverterchanges DC to AC. It is designed by a brushless type from a permanentmagnetic and structure is made to absorb an oscillation.
Rated Capacity : 400W, Output Voltage : DC 24V Operation Winding Speed : 2.7m/sInner Winding Speed : 50m/sType of Solar Cel : Single Crystalline Silicon Solar Cell.
Built-in bypass diodes.Open Circuit Voltage : 21.8 V Short Circuit Current : 4.75 A Max Output Voltage : 17.3 V Max Output Current : 1.5 AMax Output : 480 W
Feature
Specification
Basic Energy Conversion TrainerWS-SGIP10
Electric energy which is converted from solar energy is used in energysource. It is designed to carry out experiments safely although students make a fault wire. It allows students to assemble solarcells on the orking table and carry out experiments according to incidenceangle of solar cells.
Load Experiment of a Solar Cell- 7 ExperimentStand - Alone Circuit Experiment- 4 ExperimentCircuit Learning Experiment for a Stand Alone Inverter
Feature
Experimental List
275
Electric & Electronic Measuring Device, Automatic Control
Power Electronics Trainer (Board Type) W S T-23
Address : 279, 1284-Gil Daedeokdaero, Daedeok-Gu, Daejeon 306-230 Rep. of KoreaHomepage : www.woosun.com
Power Electronics Trainer (Board Type)W S T-33A
DC Servo Motor TrainerW S T-9
Setpper Motor TrainerW S T-10
This equipment is designed for Power Electronics and it consists of 10experiment board.
Diode Rectification Board Single Phase Control BoardThree Phase Control Board Single Phase AC Control BoardThree Phase AC Control Board SCR Switching BoardDC Power Control Board Single Phase Inverter BoardThree Phase Inverter Board Single Phase Cyclo Converter Board
2. Pow er Electronics Educational Equipment
Feature
Experiment Board
This equipment is designed for Power Electronics and it is possible tostudy from diode rectification to inverter experiment.
Diode Rectification1-Phase SCR Phase Control Rectification & AC Power Control3-Phase SCR Phase Control Rectification & AC Power ControlDC Power ControlSingle Phase Inverter CircuitThree Phase PWM Voltage Type Inverter Circuit
Feature
This equipment could be test out principle and introduction of DC servoPID controller operation and position control.
Basic Operations Practice of Servo MotorWhat is PIC Control?Position Control Practice
Feature
Experimental List
There are block diagrams for oscillator circuit, control circuit and drivecircuit etc. The LED shows the polarity of rotor and stator
JOG. Mode ExperimentRUN Mode ExperimentINDEX Mode ExperimentApplication of a Step Motor (C.N.C Operation)
Feature
Experimental List
Experimental List
276
Electric & Electronic Measuring Device, Automatic Control
WOOSUN CONTROL CO., LTD.WOOSUN CONTROL CO., LTD.
Series P.L.C Trainer (GLOFA GM4)WSB-60P
Series P.L.C Trainer (MITSUBISH MELSEC-Q)WSB-90P
Storage System TrainerWSR-6
Elevator TrainerWSE-0
It allows users to do P.L.C training without other devices.The approach switch. photo sensor and small induction motor combined and display revolutiondetecting. The push button switch, output lamp and buzzer can assist program simulator. The inputoutput module and sensor contain power supply.
PLC Module : - CPU & Power Module - Digital Input & Output Module : Each 32 pointsPower SupplySensor Unit : DC Motor / Photo Sensor / Proximity SensorInput Switch Unit / Output Lamp Unit / Digital Switch Unit
3. Mechatronics & Automation Educational Equipment
Feature
It is designed to learn MELSEC-Q PLC from basic to application. It basically contains approachsensor, photo sensor and DC motor. Users can carry out experiments conveniently with built-inDC power supply.
PLC Module : - CPU & Power Module - Digital Input & Output Module : Each 32 pointsPower SupplySensor Unit : DC Motor / Photo Sensor / Proximity SensorInput Switch Unit / Output Lamp Unit / Digital Switch Unitt
Feature
This equipment drives induction motor and air cylinder system to auto storage and take outstorage goods with 3 axis control auto storage ware house system for accuracy actuating.
Store house(20House) : 1 Set Air Unit : 1 SetInduction Motor : 1 220V, 15W(Break Type) : 1 EA Reduction Gear : Left/Right : 30 : 1, Up/Down : 30 : 1Air Cylinder : 20-90 mm Double Type-1EA Slide Cylinder : 20-100 mm, Auto Switch : 2 EASelect Switch : 1 EA / Proximity Sensor : 4 EA Select Lamp & Buzzer : 4 EA / Relay : 4 EADC Gear Motor : X Axis, Y Axis Control Box : 1 Set
Feature
Experimental List
It is an application training device of P. L. C Trainer. It uses real three-phase induction motorwith electronic controlled breaker as if real elevator.
Experiment : CAR's winding machine operation exercise CAR's location indication exerciseWinding machine's automatic stop exercise CAR's High/low limit driving exerciseWinding machine's operation exercise Freight elevator's call exercisePassenger elevator's operation exercise.
Feature
Experimental List
Specification
Specification
Address : 279, 1284-Gil Daedeokdaero, Daedeok-Gu, Daejeon 306-230 Rep. of KoreaHomepage : www.woosun.com 277
Electric & Electronic Measuring Device, Automatic Control
P.I.D device installed separately part the Levelcontrol system that belong to driver part establishnot cyber real things.
WST-25A-M System ControllerPower : 1[ ], AC 220[V], 50/60[Hz]System Software : AT MARS T25 V3.0System Control Block : 16 setComputer Interface : 1RS-232C
WST-25A-L Level Control SystemLever Range : 0~300mm / 0~10[V]Liquid & Voltage : 1.9 / min & 10[V]Variable Method : Continuous VariableLevel Sensor
WST-25A-T Temperature Control SystemHeater : 100[V], 100[W]Temperature Sensor : PT 100[ ]Temperature & Voltage Ration : 50° & 10[V]Cooling Fan : AC 200[V]
WST-25A-S Servo Control SystemMotor : DC Servo Motor , DC 0 ~ 75[V]Tacho Generator : DC 0~10[V]Brake & ScaleControl Method : PWM Type
Automatic Control Trainer (P.I.D Control, Board Type)W S T-25A
PC Based Electricity & Electronics Exp. TrainerW S T-50
4. Electricity Electronics & Automatic Control Educational Equipment
The SmaTra is basically PC Based Electricity, Electronics & Power Electronics Exp.and it is possible to interface with PC. This trainer consist of 14 items and 50modules. Modules are classified into Lower, Midle and High Class. Therefore userscan study circuit and principle in a step. First of all, the SmaTra has thetroubleshooting ability and it helps users to understand a circuit easily.
DC Circuit : 4eaAC Circuit : 3ea Semiconductor Circuit : 4ea Digital Circuit : 7ea Transistor Amplifier Circuit : 4ea Power Circuit : 4ea OP-Amp Circuit : 4ea
Oscillation Circuit : 2eaMagnetic Circuit : 3ea A/D & D/A Converter : 2eaSensor Circuit :4ea Photo Electronics Circuit : 1ea, DC Servo : 1ea Power Electronics Circuit : 7ea
Feature
Experiment Module
Sensor TrainerWS-S100
This equipment is designed to learn the characteristicof sensor circuit. Main controller contains the power supply, A/D & D/A converter,interface, position meter, motor drive amp, P controller, etc. By connecting with mainunit, data measured from modules can be displayed on CRT and printed out
Infrared Sensor ModuleCDS Sensor Module Pressure Sensor Module Load Cell Sensor Module Gas Sensor Module
Humidity Sensor Module Temperature Sensor ModuleCurrent Sensor Module Encoder Module Photo Sensor Module
Proximity Sensor Module Supersonic Sensor Module Voice Control Sensor Module
Feature
Experiment Module
278
Electric & Electronic Measuring Device, Automatic Control
Electric Machine Exp. TrainerWSM-1
Series Motor & Generator TrainerWSM-7~WSM-20
5. Electric Machine & Hydraulic Pneumatic Educational Equipment
WSM-7 Wound Induction Motor & DC Shunt Ge. Trainer WSM-14 DC Shunt Motor & DC Compound Ge. TrainerWSM-8 Synchronous Motor & Synchronous Ge. Trainer WSM-15 Wound Induction Motor& DC Compound Ge. TrainerWSM-9 DC Compound Motor & Compound Ge. Trainer WSM-16 Synchronous Motor & DC Compound Ge. TrainerWSM-10 DC Shunt Motor & Synchronous Ge. Trainer WSM-17 Induction Motor & DC Shunt Ge. TrainerWSM-11 Induction Motor & DC Compound Ge. Trainer WSM-18 DC Compound Motor & Synchronous Ge. Trainer
WSM-12 Dynometer Trainer WSM-19 DC Shunt Motor & DC Shunt Ge. TrainerWSM-13 DC Series Motor & DC Compound Ge. Trainer WSM-20 1-Phase Induction Motor & DC Shunt Ge. Trainer
The electric machine experiment set contains series, shunt, wound DC machine thatclassify connection way, single induction motor that used condenser run type andphase splitting induction type, 3 phase squirrel motor, slip ring motor that usedsynchronous motor and wound induction motor, universal motor that used as AC andDC braking machine that used brake and dynamometer.These parts can assembly use to DC machine, induction motor and synchronous motor.
Power : 3[ ], AC 220[V], 50/60[Hz]Electric Machines : 7setExperimental Modules : 10set
Main Device Unit / Electric MachineStorage Cabinet / Working Table / FrameGraphic Board (Insulation Plate) : 1unit
Feature
Transformer TrainerWSM-24
This equipment is designed for principle of a transformer. 3 single phase transformers are built in an equipment and a circuit diagram is printedon the front panel of the equipment.
Measuring Coil Resistance of Transformer. Saturation curve and voltage ratio of Transformer.Impedance of Transformer.Current Ratio and Impedance of Transformer.Voltage regulation curve of transformer.Polarity of Transformer.The No-load experiment of a single phase Transformer.Short experiment of a single phase Transformer.
Load experiment of a single phase Transformer.Parallel operation experiment of a single phase transformer.Three phase connection experiment of single phase transformer.Vconnection practice experiment of single phase transformerThe No-load experiment of a three phase transformer.Short experiment of a three phase Transformer.Load experiment of a three phase Transformer.
Feature
Specification
Experimental List
WOOSUN CONTROL CO., LTD.WOOSUN CONTROL CO., LTD. Address : 279, 1284-Gil Daedeokdaero, Daedeok-Gu, Daejeon 306-230 Rep. of KoreaHomepage : www.woosun.com 279
Electric & Electronic Measuring Device, Automatic Control
5. Electric Machine & Hydraulic Pneumatic Educational Equipment
Electro-Pneumatic Trainer (Quick Module Type)WSP-4
This equipment contains solenoid valve, all sorts of switch, relay, sensor for basicpneumatic to application practice. This equipment is designed pneumatic modulartype & modular type that use at the AL injection molding board. Attach method ofeach kind module is quick & easy type. It is plastic injection molding type and its sizeis 100(W)X 85(D)X15(H)mm. Clearance of AL injection molding board is 30mm.
Power : 1[ ], AC 220[V], 50/60[Hz]Pneumatic Modules : 35 unit
Electric Modules : 3 unitElectric Control Panel : 9 Block
Feature
Feature
Specification
Inverter Experimental TrainerWSM-2310
This equipment is used to study a principle of an inverter system. Each meters arebuilt in the equipment and users can check change of voltage and frequency duringthe equipment is operated. It is easy to control output voltage and frequency with aLCD loader. This equipment can be connected to an external device. To checkrotation direction of a motor, coupling is equipped at the motor.
The operation by key-pad The operation by control a terminal plateThe operation by control a terminal plate and key-padThe setting of accelerating-decelerating timeSpeed command The multi-stage operationThe a stop-method of the matter happen timeFull-territory DC braking of stop-command input time
Feature
Specification
Experimental List
Application Hydraulic Trainer(Quick Module Type)WSH-4
This equipment is designed hydraulic modular type that use at the ALProfile board iron working table contains 4 wheels at the bottom for easymoving. There is an over 40 liter oil tank at the working table, the workingtable contains relief valve attach for safety. Attach method of each kindmodule is quick & easy type. It is plastic injection molding type and its sizeis 100(W)X 85(D)X15(H)mm. Clearance of AL injection molding board is30mm.
Power : 1[ ], AC 220[V], 50/60[Hz]Hydraulic Modules : 38 unitElectric Modules : 3 unitElectric Control Panel : 9 Block
Option : Excavator trainerIt is made to control the excavator's working by using hydraulic cylinders-swing, arm, boom and bucket cylinder.