edge bts commissioningguide
TRANSCRIPT
P300 User’s Guide 4/26/2011
Page 42 G3 Technologies, Inc. Proprietary Information Subject to the restrictions on the cover page
APPENDIX B: Nokia Commissioning Process The user brings up the Nokia BTS Manager by clicking on the icon on the desktop to bring up the Nokia BTS Manager.
Figure 62 - Appendix B Nokia BTS Manager
Determine the COM port number for the USB to Serial using Control Panel -> System -> Hardware -> Device Manager -> Ports (COM & LPT) -> Prolific USB-to-Serial Comm Port (COM#). Modify the serial port number using BTS Manager -> File -> Options as follows:
P300 User’s Guide 4/26/2011
Page 43 G3 Technologies, Inc. Proprietary Information Subject to the restrictions on the cover page
Figure 63 - Appendix B Options Menu Wait till the VIFA light turns GREEN then click the Commissioning -> Wizard:
Figure 64 - Appendix B Commissioning Wizard
Click Next on the BTS Commissioning Wizard to bring up the Set Transmission Parameters window, enter alphanumeric Site Name and numeric Site ID in the window and click LIF Settings…:
P300 User’s Guide 4/26/2011
Page 44 G3 Technologies, Inc. Proprietary Information Subject to the restrictions on the cover page
Figure 65 - Appendix B Set Transmission Parameters Verify Interface in Use and CRS in Use for LIF 1 are CHECKED, the Interface Name and Interface Moderead E1/T1 interface 1 and E1 120 ohm respectively. Ensure Interface in Use for LIF 2, LIF 3 and LIF 4are UNCHECKED. Click APPLY then OK on LIF Settings – FXC E1/T1 Symm (VXTB11) window.
Figure 66 - Appendix B FXC E1/T1
P300 User’s Guide 4/26/2011
Page 45 G3 Technologies, Inc. Proprietary Information Subject to the restrictions on the cover page
The following windows appear one after another:
Figure 67 - Appendix B E1/T1 Manager - Reading Data
Click Synchronization… on the BTS Transmission Parameters window to bring up the Synchronization – FXC E1/T1 Symm (VXTB11) window.
Ensure Priority 1, Unit and FB/IF read Rx Clock, 1 E1/T1 and 1 respectively. Ensure Priority 2 reads Internal Timing and Network Topology reads Chain on the Synchronization – FXC E1/T1 Symm (VXTB11) window. Click APPLY then OK.
Figure 68 - Appendix B Synchronization Window
Click Next on the BTS Transmission Parameters window to bring up the Transmission Configurationwindow. Click Traffic Manager.
P300 User’s Guide 4/26/2011
Page 46 G3 Technologies, Inc. Proprietary Information Subject to the restrictions on the cover page
Figure 69 - Appendix B Transmission Configuration
If a previous Abis allocation file exists, import the file and skip the next 4 steps. Otherwise, click OMUSIGon the Traffic Manager window:
Figure 70 - Appendix B Traffic Manager
P300 User’s Guide 4/26/2011
Page 47 G3 Technologies, Inc. Proprietary Information Subject to the restrictions on the cover page
Place cursor over slot 31 and click to bring up the following dialog and select Width 64 kbit/s:
Figure 71 - Appendix B Width Selection
Click TCHS and place cursor over slot 1 to bring up the following dialog:
Figure 72 - Appendix B TRX Selection
Select “TRX1’s TCHs” follow by “Width 64 kbit/s”. Place cursor over slot 3 for TRX 2, repeat for TRX 3 and 4, the window should be as follows:
Figure 73 - Appendix B Traffic Manager Part 2
P300 User’s Guide 4/26/2011
Page 48 G3 Technologies, Inc. Proprietary Information Subject to the restrictions on the cover page
Click TRXSIG on the Traffic Manager window and place cursor over slot 30 to configure “Width 64 kbit/s” for TRX 1, slot 29 for TRX 2, slot 28 for TRX 3 and slot 27 for TRX 4. The end result should be identical to the following window. Click OK to accept the configuration.
Figure 74 - Appendix B Traffic Manager Part 3
Click Next on the Transmission Configuration window once the Traffic Manager is fully configured.
Figure 75 - Appendix B Transmission Configuration
P300 User’s Guide 4/26/2011
Page 49 G3 Technologies, Inc. Proprietary Information Subject to the restrictions on the cover page
Click Yes to Nokia BTS Manager:
Figure 76 - Appendix B Nokia BTS Manager Dialog Box
Click Next to BTS Test Reporting:
Figure 77 - Appendix B BTS Test Reporting
P300 User’s Guide 4/26/2011
Page 50 G3 Technologies, Inc. Proprietary Information Subject to the restrictions on the cover page
Click Next to EAC Input Settings:
Figure 78 - Appendix B EAC Input Settings
Click OK to Nokia BTS Manager:
Figure 79 - Appendix B Nokia BTS Manager Dialog
P300 User’s Guide 4/26/2011
Page 51 G3 Technologies, Inc. Proprietary Information Subject to the restrictions on the cover page
Verify all 4 outputs are CLOSED. Click Next to EAC Output Settings:
Figure 80 - Appendix B EAC Output Settings
Click Finish to BTS Commissioning Report:
Figure 81 - Appendix B BTS Commissioning Report
P300 User’s Guide 4/26/2011
Page 52 G3 Technologies, Inc. Proprietary Information Subject to the restrictions on the cover page
A successful commissioning process is shown below:
Figure 82 - Appendix B BTS Events Window