edition 10 scania uptime - mackaytruckparts.com.au · scania uptime parts and service scania...
TRANSCRIPT
SCANIA UPTIMEPARTS AND SERVICE
SCANIA MAINTENANCE WITH FLEXIBLE PLANSSERVICING WHEN YOU REALLY NEED IT. SEE PAGE 3.
3 Years’ Flexible Maintenance**
Increased Profitability
Maximise your Uptime
Tailored plan via Operating Data
Servicing when required
"With our Scanias, we've gone the full repair and maintenance package. Now all we've got to do is fuel, tyres and some grease on the truck."
MATT WINTERFIELDWinterfields Float Hire, Mt Gambier SA
SEE INSIDE FOR ALL AVAILABLE OFFERS
EDITION 10
STILL GOT THE POWER?
BATTERY MAINTENANCE TIPS
Extend battery life with a well matched alternator.
Good charge regulation means that the alternator can
cope with the demand for electric current and that it is
supplying a surplus charge of at least 10 A. Incorrect
charge regulation will mean that peak consumption is
being handled by the batteries. This may result in
reduced battery life and may cause starting difficulties.
The external condition of the batteries and the charging circuit should be inspected regularly. Many problems associated with batteries and charging can be prevented by following some simple maintenance advice. Remember that all battery maintenance is particularly important during cold or very hot weather.
n Make sure that the batteries and battery terminals are clean. Oxidation and dirt can result in current leakage and a voltage drop.
n Check that the battery connections are intact. Grease battery terminals and battery connections with terminal grease. Corroded battery connections provide a poor connection which results in impaired battery capacity.
n Check the acid level of the battery.
n Charge the batteries after the vehicle has been stationary for a week or more.
n Top up with distilled water when necessary.
ALTERNATORREPLACEMENT (PGR + 4 SERIES) SERVICE EXCHANGE
100 amp alternator 16058100
3 Supports original and
additional equipment.
(Excl. Core Charge)
EACH $899# FITTED
INJECTORSREPLACEMENT (PGR + 4 SERIES) SERVICE EXCHANGE
$5,299 per set fitted
HPI engines, 12L 03018100
$3,999 per set fitted
PDE engines, 9L 03018101
$4,999 per set fitted
6 cylinder PDE engines, 03018102
11, 12, 13L
$6,499 per set fitted
8 cylinder PDE engines, 03018103
11, 12, 13L
(Excl. Core Charge)
Excludes XPI Engines
FITTED FROM $3,999#
STARTER MOTORREPLACEMENT (PGR + 4 SERIES) SERVICE EXCHANGE
$599 fitted
S4 DSC9 only 16108101
$999 fitted
Except DSC9 S4 16108100
(Excl. Core Charge)
FITTED FROM $599#
Page 2
TRUCK
~ These figures are for illustrative purposes only and represent a snapshot of a Scania R560 6X4 prime mover travelling Melbourne to Adelaide on the 26/10/16.
** Up to 3 Years’ Flexible Maintenance included for retail customers only with trucks ordered and delivered in 2017, Scania Driver Score range between 55%-70% and restricted to the following operation types: Distribution < 30t GCM with Max Annual 100,000km, Single Trailer < 45t GCM with Max Annual 140,000km, B-Double < 68t GCM with Max Annual 200,000km, Road Train < 92t GCM with Max Annual 150,000km, Road Train < 130t GCM, up to 2 years with Max Annual 120,000km.
Scania Service Scheduling CentreDon’t call us - We'll call you.
To support the new Scania Maintenance with Flexible Plans, Scania Australia has created a National Service Scheduling Team to manage service planning. The team will call customers to book services and repairs at times that best suit customers’ needs. The team will be managing all your vehicles service schedules, the ability to include trailers and other non-Scania equipment into their service scheduling system.
Scania Maintenance with Flexible Plans sets servicing timeframes to meet the precise needs of each truck, based on distance travelled, loads transported, the type of roads and driver efficiency. It can mean fewer or faster workshop visits, reducing downtime, boosting profitability.
DRIVER SCORE
87%~
CLIMB & GRADIENT
450M/4.7%~
FUEL CONSUMPTION
2.17KM/L~
IDLING
14%~
KILOMETRES TRAVELLED
1900KMS~
AVERAGE WEIGHT
65 TONNE~
Increased Profitability
Maximise your Uptime
Tailored plan via Operating Data
Servicing when required
STANDARD WITH
EVERY NEW TRUCK
DELIVERED
IN 2017
SCANIA MAINTENANCE WITH FLEXIBLE PLANSUP TO 3 YEARS’ INCLUDED WITH EVERY NEW TRUCK**
(Excl. Core Charge)
Excludes XPI Engines
Page 3
SERVICE AGREEMENTS
RETARDERREPLACEMENT (PGR + 4 SERIES) SERVICE EXCHANGE
$5,199 fitted Type 1 retarder replacement 10508152
$5,999 fitted Type 2 retarder replacement 10508153
FITTED FROM $5,199#
GEARBOXREPLACEMENT (PGR + 4 SERIES) SERVICE EXCHANGE
GRSO905 gearbox 05008151
GRSO925 gearbox 05008151
(Excludes Core Charge, Range change and Retarder)
FITTED FROM $699#
WATER PUMPREPLACEMENT (PGR + 4 SERIES) SERVICE EXCHANGE
$699 fitted 9, 11, 12L not XPI 02258100
$899 fitted 9, 13L - XPI (PRG Only) 02258101
$899 fitted 16L (S4 Only) 02258102
$999 fitted 16L, 500, 560, 02258103 620, 730 HP (PRG Only)
Prices excludes Coolant. (Excl. Core Charge)
$13,999#
EACH FITTED
Scania Fitted Price Guarantee* gives you a 2-year parts and labour warranty on Fitted Price Repairs in this Uptime when fitted by a Scania branch or participating authorised dealer (Excludes other repairs carried out by the Scania branch/dealer).
To know your costs upfront, simply purchase any offers in this edition of Uptime and you will pay no more than the advertised price.
TRUCK
Page 4
Maintenance Programme for Scania Trucks 5 years or older.
Scania now offer a “Good News For Old Friends” Maintenance Programme for your truck from only $149.951 a month, based on a 12 month agreement and will be available to all customers until 31st December 2017. We offer reassuring fixed prices on many of our repairs, including all parts and labour. You never have to pay a cent more than you’re quoted.
“Good News For Old Friends” Offer
n Scania Maintenance Programme from $149.951 per month and available until the end of 2017, based on Scania vehicles 5 years and older.
n Customer’s vehicles will receive a minimum of 4 services per year included within the programme and a fleet discount on parts purchased through the workshop or over the counter for the life of the programme.
n Service schedule offering will be on 20,000km and 15,000km intervals.
1 Applicable to Prime Mover, Single Trailer operation –
up to 100,000km per year and Local Distribution/
Hook Loader/ Front Lift/ Tipper and Dog – up to
70,000km per year
FROM
$149.951
PER MONTH
GOOD NEWS FOR OLD FRIENDS
TURBO CHARGERREPLACEMENT (PGR + 4 SERIES) SERVICE EXCHANGE
Includes oil & filter change$1,899 fitted DC16 PDE 01308101$1,699 fitted H/duty, 9, 11, 01308102 12L PDE/HPI$1,499 fitted 9, 11,12L PDE/ HPI 01308103$1,799 fitted H/duty DT12 01308104$1,599 fitted DT12 01308105$3,999 fitted 9,13L XPI normal duty 01308110$4,399 fitted H/duty 9,13L XPI 01308111
(Excl. Core Charge)
FITTED FROM $1,499#
(Excl. Core Charge)
SHOCKABSORBER KITREPLACEMENT (PGR + 4 SERIES)
1 axle both sides 12258150
3 Improve ride comfort and road handling.
PER AXLE $499* FITTED
TRUCK DIFFERENTIALREPLACEMENT (PGR + 4 SERIES) SERVICE EXCHANGE
RB662 3.07, RB662 3.42 (Front Diff Only) 08058151
3 Tandem bogie without hub reduction.
$10,999#
EACH FITTED
Page 5
A NEW LEASE ON LIFE
Scania's Bus Service Exchange programme delivers a new engine complete with a two year warranty.
Scania is giving hard-working buses a new lease on life with a new workshop Service Exchange programme that provides a factory-reconditioned engine with a 2-year warranty.
The Scania Service Exchange programme is carried out by the Scania branch workshop closest to the customer and is designed to save time and money. It is ideal for route buses or interstate coaches that may have clocked up significant kilometres in a chassis that may be only halfway through its working life.
The Scania Service Exchange programme saves time by replacing the traditional model some operators have followed of performing an in-chassis reconditioning of their engines at their own workshops. Traditionally this has meant having the vehicle off the road for up to 4 weeks. Scania’s alternative is to provide a 3-day turn-around for the installation of the replacement engine.
SEE PAGE 7 FOR OFFER DETAILS.
INJECTION PUMPSERVICE EXCHANGE
WAS $11,770 | NOW $8,470
L94, DC9 574197 $8,470# EACH
RECONDITIONED DIFFERENTIAL PACKAGE$5,170 fitted
4.22 08058160
$5,690 fitted
4.88 or 5.57 08058150
3 1 year warranty
3 Crown wheel replacement
3 Bearing replacement
3 Includes removal & fitment
3 Next day turnaround
3 Must be pre-booked
FITTED FROM $5,170#
Image is for illustration purposes only.
K – SERIES HYDRAULIC PUMP
Was $5,357 | NOW $3,300
2202323
$3,300 EACH
3 Ensure optimum performance
BUS
Page 6
STEERING WHEELWas $1,133 | NOW $660
L - Series Steering Wheel 1545452
Was $1,353 | NOW $880
K – Series Steering Wheel 1487519 FROM $660WHILST STOCKS LAST
K – SERIES COMPRESSOR CONVERSION KIT 720Was $3,113 | NOW $1,540
2008082
$1,540 EACH
BUS ENGINE PACKAGESERVICE EXCHANGE
n 3 Day Turnaround
n Includes removal, supply & fitment
n 2 Year Warranty
n Must be pre-booked
n Range of engines available - enquire at branch
K230 EURO 4 – INLINE 5 CYLINDER
$34,990#
0572704
EACH FITTED
K280 EURO 5 – INLINE 5 CYLINDER
$38,990#
0577337
EACH FITTED
"The Scania Exchange programme is faster, cheaper and comes with a 2-year factory warranty. That is a pretty compelling offer for any bus operator, large or small."Peter Smith, Parts Manager - Victoria & Tasmania
"Scania offered us a commercially viable option and the peace-of-mind of the warranty,
so the reality is we’re better off with Scania."Terry Campbell, General Manager, Fleet Services at The Dyson Group
SEE ABOVE FOR OFFER DETAILS.
Page 7
$79 EACH
AUTO SLACKAuto Slack 1-1/2” - BP21103 10S - 5” to 6”
Auto Slack 1-1/2” - BP21102 10S - 5-1/2” to 6-1/2”
Auto Slack 1-1/2” - BP22103 28S - 5” to 6”
Auto Slack 1-1/2” - BP22102 28S - 5-1/2” to 6-1/2”
Auto Slack 1-5/8” - BP23106 37S - 6”
Auto Slack 1-5/8” - BP23102 37S - 5-1/2” to 6-1/2”
3 High Quality - Great Price
3 MBA Brand - Supported By Australian Truck & Auto Parts
3 Eliminate constant manual adjustment
3 Range to suit all applications
BRAKE CHAMBER$40 each 30/30 Brake Chamber 30-30SB
$49 each 24/24 Brake Chamber 24-24SB
3 High Quality - Great Price
3 MBA Brand - Supported By Australian Truck & Auto Parts
FROM $40
$1,399 EACH $275 EACH
RINGFEDERRingfeder Type 303(AUS) 15990007
DISC BRAKE PAD KIT09.801.08.16.0
3 2 year warranty
3 Australian Spec
3 D rating of 320kN
3 Genuine Ringfeder Quality
3 Genuine BPW Brake Pads
3 Suits SB4309T Axle
3 Knorr Calipers
WE KEEP YOUROLLING
Trailer Maintenance ProgrammeEnsure your trailers are maintained as professionally as your trucks with a Scania Trailer Maintenance Programme. And with all work carried out by fully-trained Scania Technicians operating to the highest possible standards.
Trailer Service Schedule includes 4 visits per year on a Scania A,B,A,C schedule.
FROM $60PER MONTH, PER TRAILER
PARTS
Page 8
FROM $399
3 Extruded Aluminium Body
3 Polycarbonate Lens
3 Fully Sealer - IP66 & IP68 rating
3 9-32 V Operation
3 5 Year LED Warranty
LED LIGHT BAR$399 each LED Light Bar - 358mm 72735
$579 each LED Light Bar - 561mm 72758
LED INSPECTION LAMP
71320
3 Lithium Battery gives 8 hours operation
3 Weatherproof
3 240V docking station
3 12/24V DC Charger
3 Magnetic latch and hook for hands free operation
PLUS 100 GLOBES$35 each Plus 100 H4 24V 48874BL2 75/70W Globe (Pack 2)
$59 each Plus 100 H7 48730BL2 24V 70W Globe (Pack 2)
3 "Plus 100" Series
3 100% more life
3 100% more light (compared to convetional globes)
3 Suitable for Polycarbonate lenses
3 ADR approved
$129 EACH
FROM $35
SCANIA PARTNERSHIPS
Scania Australia is an approved agent for many supporting products.
Scania branches around Australia are able to provide service, repair, warranty and maintenance systems for trailer sets equipped with BPW, MBA, WABCO and SAF Holland components.
Scania workshop technicians are already familiar with many WABCO and SAF Holland technologies and have undergone extensive training to be accredited to work on trailer components.
Many Scania workshops have brake testers and shakers available to allow expert brake testing services. Our workshop expertise and testing is compliant and certified to Australian standards. To find out more contact your local Scania branch.
Page 9
INDUSTRIAL & MARINE FILTER KITSScania has a substantial range of ready picked Maintenance Kits for simplified service of Scania Engines.
The kits contain all Scania parts needed for the maintenance, except for parts that exist in several variants, e.g., air filters.
The price for ordering kits is lower than ordering separate parts.
INDUSTRIAL ENGINES
9 Litre EnginesDC09A, XPI/PDE $59 2149388
DC9A EMS, PDE $59 2149394
DC09A, PDE $125 2191667
DC9A EMS, XPI/PDE $129 2153864
DC9A EMS, PDE $129 2153871
DC09A, PDE $130 2191668
DC09A, XPI $175 2149386
12 Litre EnginesD12A EMS, PDE $59 2153865
D12A EMS, PDE $125 2153866
D12A EMS, PDE $125 2154832
13 Litre EnginesDC13A, XPI/PDE $59 2149388
DC13A, PDE $125 2191667
DC13A, PDE $130 2191668
DC13A, XPI $175 2149386
INDUSTRIAL ENGINES
16 Litre EnginesDC16A, PDE $65 2149396
DC16A, PDE $135 2153869
D16A, PDE $135 2154833
DC16A, PDE $165 2149391
DC16A, PDE $169 2149393
DC16A, XPI $185 2149387
MARINE ENGINES
9 Litre EnginesDI09M, PDE $59 2149394
12 Litre EnginesD12M EMS + D12M EMS, PDE $59 2153865
13 Litre EnginesDI13M, PDE $59 2149394
16 Litre EnginesDI16M, PDE $65 2149396
D16M, PDE $65 2153870
FROM $59
INDUSTRIAL / MARINE
Page 10
Scania Genuine Parts Terms and Conditions Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Subject to any such non-excludable rights and this express Warranty, all other terms, warranties, conditions, representations and undertakings (express or implied) which may lawfully be negated, excluded, modified, limited or restricted from and in relation to the sale of your Scania part/s are hereby to the extent permitted by law (but not otherwise) negated, excluded, modified, and restricted and the Company’s liability shall, whenever permitted by law, be limited to the repair or replacement of any defective or faulty part or the payment of the cost of any such repair or replacement as the Company in its sole discretion determines to be appropriate. Scania Australia Pty Ltd (the Company) warrants that each new Scania Spare Part sold by it or any of its Branches or Authorised Distributors/Dealers to be free from defects in material and workmanship under normal use and service, its obligation under this warranty being limited to repairing or replacing, as hereinafter provided, at its option, at the Company’s Branch or Authorised Distributors/Dealers discretion any part or parts found to the Company’s satisfaction to be defective upon examination by it.
* Fixed Price Repairs Terms and Conditions 1. Scania Australia standard terms and conditions of sale apply. These are available online at www.scania.com.au 2. Applies to Retail sales only. 3. Available at participating branches and dealers only. 4. Fitted prices include inspection, diagnosis, verbal assessment, Scania approved parts, labour and consumables. 5. All prices include GST. 6. The published prices apply to the job shown (part numbers & RTS codes) and do not apply to other similar products available from Scania. 7. The Fitted Price Repair special offer pricing cannot be used in conjunction with any other discount or promotion. 8. Fitted Price Repair pricing is part of a promotional offer, which can be withdrawn at any time. In the event Scania Australia chooses to withdraw the promotion, then notice will be issued via the website: www.scania.com.au . This would not affect any pre-existing or accepted work agreed to by Scania Australia for the duration of the promotion. 9. Scania Australia may in the future alter any terms of this promotion without notice and in the event Scania Australia chooses to alter the terms of this promotion, then notice will be issued via the website: www.scania.com.au. This would not affect any pre-existing or accepted work agreed to by Scania Australia for the duration of the promotion. 10. All prices assume presentation of the vehicle, by the customer, to the repairing workshop. 11. Additional breakdown related charges will apply if the vehicle has suffered an involuntary stop at the roadside. 12. The Fitted Price Repairs published are created using Scania’s standard times based on standard Scania vehicle specifications and do not include any additional labour required for the removal of catwalks, ancillary equipment, bodywork, superstructures or any non-standard equipment fitted to the vehicle. Additional time required to complete the job in respect of these items will be agreed with the customer prior to any work being carried out. 13. Mineral oils are used in all circumstances. Fixed Price Repairs do not include semi synthetic or fully synthetic oils. If these oils are required the difference in price between mineral oil and the semi synthetic or fully synthetic oils will be charged. 14. All information is believed to be correct at the time of going to press, however, Scania reserve the right to introduce at any time modifications of changes to the jobs and or programme as part of a policy of continuous improvement.WARRANTY CLAIMS To make a claim under this warranty: 1. Return the vehicle to a company-owned Scania branch or authorised dealer. 2. Provide details of the warranty (including the invoice for work completed) when delivering your vehicle to the company-owned Scania branch or authorised dealer and ask the service personnel to lodge a claim on your behalf. 3. Complete a claim form if requested. Other documentation such as proof of servicing, invoices etc. may also be required. We will ask for this documentation if we decide that it is required. 4. When travelling away from home, in the event that your vehicle requires emergency repair work and you are unable to deliver your vehicle to a company-owned Scania branch or authorised Scania dealer please contact Scania Assistance on 1300 722 642. Towing, overtime and roadside assistance costs are not covered on any warranty claims. For more information relating to the terms and conditions relating to warranty claims please contact: Scania Australia Pty Ltd. 212-216 Northbourne Rd, Campbellfield VIC 3061
SCANIA LDF3 FULLY SYNTHETIC ENGINE OIL
20 Litre - $189
LDF3 10W-40 2021362
209 Litre - $1,599
LDF3 10W-40 2021363
3 Promote better protection
against wear and tear.
3 Protect and prolong the life of
your engine.
3 Enhance the long drain
performance.
AIR FILTER $109 each
4T, PGR, Non Fire 1869993
Retardant 13m² Air Cleaner
$125 each
4T, PGR, Fire Retardant 1869995
13m² Air Cleaner
3 These uniform density fine
particle filters prevent clogging
and thus avoid excessive fuel
use or engine wear.
FROM $189FROM $109
SCANIA COOLANT
5 Litres - $29
1921955
20 Litres - $109
1921956
205 Litres - $1059
1921957
WINDSCREEN WASHER FLUID
2202123
3 Reduce corrosion.
3 Prevent streaking,
judder noise and film.
FROM $29
$10 EACH
CONSUMABLES
Page 11
WATER BOTTLE2410233
3 Features rubber grip.
3 23cm tall.
$10.20 EACH
SCANIA SPORTS CAP2559771
3 Dark Grey.
SCANIA MULTI TOOL2560990
3 Stainless steel.
3 Features 10 tools.
3 Includes gift box.
REVERSIBLE SAFETY VESTJWRV16
3 Padded to keep you warm.
$27 EACH
$45 EACH $132 EACH
Find your nearest Scania dealer or workshop location nationwide, with the Scania Dealer Locator App at www.scania.com.au
# PLEASE NOTE: Refundable core fees will be charged at the time of product purchase and will show as a separate line item on your invoice. Core fee credit will be applied to the customer account or invoice when cores are received subject to the following conditions: Cores must be complete, fully assembled, drained of fluids and in rebuildable condition and chassis number and mileage information must also be provided. Burnt products or any cores that are broken damaged or destroyed by incorrect use, dismantling, handling or transportation will not be accepted. Prices within the promotion include GST and conclude end of July 2017, or while stocks last. Images in this brochure are for display purposes only and may not represent actual products. Offers available from your authorised Scania branch or participating dealers. Prices and specifications were correct at the time of printing and are subject to change without notice. For a full list of Scania terms and conditions please go to scania.com.au. RTA # AU07116
SAU 2017 – EDITION 10
MERCHANDISE