StartApp

EN

Compact manual

Download the e.DO App

2

To start the e.DO app, follow thesesimple 10 steps:

1 - Download the e.DO app on your PC from the email 2 - Connect the tablet to the PC with a USB cable

3 - Confirm on the tablet that you want to exchange and share files

4 - Copy the e.DO app from the PC to the tablet (the download folder for instance) 5 - From the tablet, go into the download folder and click on the installer NOTE: e.DO App is available only for Windows or Android OS

6 - Android probably asks you if you want to install an uncertified app: confirm that you want to do it

3

Install & connect e.DO App

7 - Install and start the app

8 - Switch-on e.DO and, after a couple of minutes, a Wi-Fi network will appear. In case of problems with Wi-Fi network connection, you shall use the LAN cable (included into the e.DO box) and an adapter (not included in the box) to connect the Tablet to e.DO

9 - Select the right network: SSID rule is edo.wifi .(serialNumber) (*)

10 - Default password is edoedoedo

(*) Check the Serial Numberof the robot on the label of the Hexagonal Base

Now you can use the e.DO app to initialize and move the robot!

e.DO App Inizialization

Made in Comau

The information contained in this brochure is supplied for information only. Comau S.p.A. reserves the right to alter specifications at any time without notice for technical or commercial reasons. The illustration does not necessarily show the products in their standard version. Edition - 03/18 - Turin