【重要】1. tiflex hose catalog · general hose heavy duty / abrasion resistant hose antistatic...

General Catalog

Tiflex Hose

General Hose

Heavy Duty /Abrasion Resistant Hose

Antistatic Hose

Other Hose

Heat Resistant Duct Hose

Abrasion Resistant Hose

Food Grade, Oil Resistant Hose

Duct Hose

Non-PVC Hose

Fitting Methodof Metal Fixture and Clamp

Technical Data

Joint for Heat Resistant Hose

Hose Cuff

5152

55

Handling of HoseGuide for Hose Selection

47484950

45

47

43434445

3737

4646

35353636

27

2728

32

3031

23252526

19212123

15161618

11111213

Clamps (Dimension Table)Chemical Resistance Guide, Pressure Unit ConversionTable and etc.

46

39394040

41

Fitting Method of Metal Fixture

Cuff for Tiflex Hose N type

Metal Fixture and ClampStandard Combination Table of Fixture and ClampMetal Fixtures (Dimension Table)

Cuff for Tiflex Hose P, P-2 and Flame Retardant P typeEnd Cuff for Tiflex Hose A typeReducing JointNipples

Tiflex Hose NH-1 typeIndustrial Cleaner HoseHinet HoseCuff for Tiflex Hose GL, GL-E, and GL-ST type

Tiflex Hose V series FP typeTiflex Hose V series SUS typeSilicone Rubber Duct Hose TS typeSilicone Rubber Duct Hose GS type

Tiflex Hose Abrasion Resistant GL type

Tiflex Hose Oil Resistant GL typeTiflex Hose GL-E type

Tiflex Hose A type

Tiflex Hose P type, P-2 typeTiflex Hose Flame Retardant P type

Tiflex Hose Oil Resistant F typeTiflex Hose GL typeTiflex Hose GL-2 typeTiflex Hose N type

Tiflex Hose E typeTiflex Hose WA typeTiflex Hose Abrasion Resistant E typeTiflex Hose Food F type

Tiflex Hose WR typeTiflex Hose WR-S typeTiflex Hose FC typeTiflex Hose Antistatic W type

Tiflex Hose F-3 typeTiflex Hose FF typeTiflex Hose WT typeTiflex Hose WS type

To use a hose more safely for a long timeGuide for Hose Selection

Ti-Eco Light Hose FF typeTi-Eco Light Hose WT typeTi-Eco Light Hose Antistatic W typeTi-Eco Light Hose WS type

Ti-Eco Light Hose GL typeTi-Eco Light Hose GL-V type 41

Tiflex Hose Abrasion Resistant GL type Cuff 27

Tiflex Hose GL-ST type 29

Tiflex Hose AP type 34Tiflex Hose V series PAL typeTiflex Hose V series AG type

● ●

●

●

●

●

● ●

● ●

●

● ●

●

●

●

●

●

● ●

●

● ●

●

●

●

Handle slowly and take 3 seconds or more for valveopening and closing not to apply hammer pressure.Hose might be broken due to applying hammerpressure.

Never use hose for medical application.You might be punished under the provision of law.

Use hose as a consumable item.

Handling of Hose (Tiflex Hose)To use a hose in more safety and for a longer time, please make sure to read "Instruction for Use","Instruction for Plumbing", "Instruction for Hose Storage, "Instruction for Transportation", "Instructionfor Maintenance", and "Metal Fixture and Band".We are not responsible for a damage in case you do not comply strictly with these instructions.

Hose might be discolored/hardened or cracked byozone due to material deterioration by ultraviolet ofsunlight or fluorescent light.If there is a sign of discolored or cracked hose,exchange it to new one immediately.

Inst

ruct

ion

for U

se

Value of working pressure shall be expressed asmaximum working pressure in case that hose is usedat 20 degrees C being bent more than its bendingradius. Hoses are not suitable for the usage thatalmost same amount of pressure as its workingpressure is continuously applied to a hose.

Working pressure is not a maximum working pressure.Use with the following pressure if pressure iscontinuously applied for a long time.(under normal operation pressure)〔General suction hoses〕1/4 or less than each working pressure〔WS, WR, WR-S, FC Type〕2/3 or less than each working pressure

Refer to each page of hose for its working pressure.Please note that working pressure differs by sizeeven if hose type is same.

Hose performance (working pressure, end-of-lifeperiod, etc.) is under the influence of ambienttemperature, fluid temperature, bending status,combination of metal fixture and band. In case thatambient temperature and fluid temperature are 50℃,working pressure will be about 1/2 compared with thatwhen they are 20℃。

There are some unusable fluids (acid, alkali, solvent,oil, and chemicals) which affects hose material withswelling or cure phenomenon. Refer to the ChemicalResistance Guide for its availability.Use with 1/3 of working pressure even if it isavailable. Especially, never use hose(s) with highconcentration acid/alkali or highly explosive andflammable chemicals. It might severely damage ahuman body if a hose breaks while in use.

Used hose should be discarded by disposal rules ineach area.

Do not use hose as pipe for compressed air.It might cause an accident by hose burst depending onuse conditions.

Hose cannot be used being buried in the ground. Itmight be damaged by earth pressure or the hosematerial might be deteriorated by bacteria affectionin the ground.

In case of use at upstroke part of submersible pump,hose might be damaged due to the hammer pressureat the pump down time. Set the pump pressure lessthan 1/3 of working pressure.

Never use non-food use hose for food use. You mightbe punished under the provision of law.

Inst

ruct

ion

for P

lum

bing

We recommend to use high pressure hose such asWS, WR, WR-S, or FC type which can not bestretched so much even under pressure.

Hose life might be significantly shortened if you use ahose bending it with shorter bending radius than thatspecified in this catalogue as bending radius.

In case that hose is used being extremely bended nearthe metal fixture, the hose life might be significantlyshortened. Plumb a hose making 1~2 meters length ofstraight part near the metal fixture.

Do not sling a hose horizontally. It might be broken.

In case a hose is used fixing the both ends , use itunder 1/2 of working pressure.In such case, bending radius of the hose might beshortened in part and it might be damaged due tostretch by pressure.

Do not move machine by pulling a hose or do not movemachine or vehicle when hose is still connected.

Hoses are consumable goods. As a hose is used for acertain period, it gradually deteriorates. Exchange thehose to new one immediately in case there is a defector the sign.

Plumb hose with allowance because it can bestretched and contracted by pressure.Do not use hose putting in sheathing pipe or side ditch.Hard part of hose might be damaged and waterleakage might happen due to the hose stretch. Inaddition, protect hose with cushion or protection tube,etc. if a hose contacts with equipment(s) or others dueto its stretching and contracting, or its swinging.

Consider not to harm human body or surroundingequipment just in case even if hose is damaged atplumbing.

Be careful not to make an impact to a hose and not tobe trapped under vehicle or the other heavy load.

Do not use hose for an application other than specifiedapplication (fluid) in this catalog.

Product containing PVC may generate dioxin whenincinerated under 800℃.

Please consult us when you use hose for high puritychemical transportation. Component of hose might beeluted into fluid.

4

● ●

●

● ●

●

● ●

●

●

●

●

● ●

●

●

●

Do not pull or lug a hose on the ground. It may causesurface damage or hole of hose.

Hose should be stored in indoor cool and dark spacenot to be exposed to direct sunlight or wind and rain.If you store a hose outdoors, it might get discolored ordeteriorated by ultraviolet, and rainwater or dust mightget into the hose.

Do not stack hose in piles or do not put heavy load on ahose. Otherwise hose might be deformed.

Roll a hose with its bending radius or longer, or put it instraight on flat and smooth surface.If hose is extremely bended or stored being put onunlevel surface, it might be deformed.

Do not throw or impact a hose. It might be broken.

Inst

ruct

ion

for H

ose

Stor

age

Inst

ruct

ion

for M

aint

enan

ce

Do not store a hose being touched rubber product.Otherwise it might be discolored.

Store a used hose in a flat place avoiding directsunlight after removing residues inside of the hose asmuch as possible and washing.

Do not remain hose on walkway. It may cause injury bytripping over or stepping.

When sling up a hose, apply multipoint sling up (Avoidone point sling up).

Please consult us for supply metal fixture beforehandin the same way as the above mentioned paragraph.

【2】 Water pressure testStop using a hose immediately and exchange it to anew one when a regular test value becomes more than1.5 times of initial value regarding stretch ablility ofnew hose under pressure as criteria.Test must be performed under working pressure.High pressure beyond necessity may shorten hose life.

Outer diameter of the nipple which is inserted in ahose should be sub equal or a little longer than innerdiameter of the hose.In case OD of a nipple is shorter than ID of a hose, anaccident such as water leakage or metal fixturedetachment may occur.

Daily CheckPerform an appearance check before daily use.In case there is a defect, exchange the hose to a newone immediately, or take measures such as defectremoval.

We are not responsible if above mentioned instructionsare not followed.

Please note that heavy duty of a hose may changedepending on type of hose band, number of hose band,and clamping force.

【1】 Appearance CheckStop using a hose immediately and exchange it to anew one if following defects are found.A. Defect near metal fixture -> Stretch in part, swelling,curve, leakageB. External flaw -> External big flaw, crack in hose hardpart, cracks at valley between pitches of hoseC. Hose defect -> Crack, deformation, breaking, innerswelling and peelingD. Other marked deterioration -> Marked discolor,hardening, swelling, crack, and etc.

Handling of Hose (Tiflex Hose)

To ensure enough tightness, please read instructionscarefully before using commercially available metalfixture or band. Depends on the shape of the fixture orband, working pressure of a hose cannot bemaintained or cannot be assembled, so please consultus in advance.

When the material of a nipple or a contact substanceis synthetic resin, hose component might move intoand the nipple or contact substance might bedeteriorated or color might be changed. So pleaseevaluate adequateness enough or consult us.

Met

al F

ixtu

re a

nd B

and

Inst

ruct

ion

for

Tran

spor

tatio

n

Test periodically for connection part, coupling part,clamping part and etc. of a hose because they will beloosened during use.

5

Comparative table

Inch 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 5 6 8Mm 19 25 32 38 50 65 75 100 125 150 200

Water, air, powders andgranules

Excels in lightweight and flexibility, Complies with FoodSanitation Law

It is minimum usable bendingradius which is a distance to thecentral axis of hose. Hose shouldnot be used with a shorterbending radius than the minimumbending radius.

It is usable maximum pressure inthe range of use from straight pipeto bent pipe with bending radius at20℃. Please note that the workingpressure may change dependingon service temperature, flexuralstate, combination of clamp andband. In case that pressure iscontinuously applied for a longperiod, hose should be used withless pressure than 1/4 of theallowable value (2/3 for Tiflex WS,New WR, WR-S, FC).

It is temperature which a straightpipe deforms under reducedpressure at -0.1 MPa/-760mmHg.It is not available temperature limit.

Food GradeHose

Tiflex Hose Food GradeF type 25-125

Liquid foods (Sake, soy sauce, vinegar, softdrinks)

Others Hi-Net Hose 4-50

Tiflex Hose Oil Resistant F type

Dust, slurry and grit

25-100 Mineral oil, plant and animal oil

Powders and granules(Iron powder, sand, etc)

Plastic material for molding,powders and granules

Antistatic type of Tiflex Hose WT type.

Smooth inside/outside surface construction, with grounding wireAntistatic Hose

Tiflex Hose Antistatic W type

Tiflex Hose E type

25-100

32-100

Thickness version of Tiflex Hose F-3 type

Excels in flexibility

Heavy duty type of Tiflex Hose WT type

Suited for delivery and suction use due to smoothinside/outside surface construction

38-100

Ti-Eco Light WT typeTi-Eco Light Antistatic W type

Ti-Eco Light WS type

38-100

25-100

25-100

Non-PVCHose

Guide for Hose Selection

Type Name of Product Diameter (φ) Fluid / Application Features

Water, muddy water,slurry, liquid food andetc.

Eco-friendly hoseComplies with Food Sanitation Law

Ti-Eco Light FF type

Tiflex Hose WR type

Tiflex Hose WR-S type

Tiflex Hose FC type

Heavy Duty/AbrasionResistant

Hose

Maximum working pressure: 1.0MPa {10.2kgf/ｃ㎡}(0.50MPa {5.1kgf/ｃ㎡} for φ300)

Maximum working pressure: 2.0MPa {20.4kgf/ｃ㎡}

For mortar conveying, excels in heavy duty and abrasion resistance

38-300

100-200

38/50

Muddy water, sand,gravel, cement, slurry

Mortar, cement fluid

General Hose

Tiflex Hose F-3 type 19-200

Water, Muddy water,slurry and etc.Tiflex Hose FF type

Tiflex Hose WT type

Tiflex Hose WS type

19-200

25-200

25-300

Bending Radius Working Pressure Deformation Temperatureunder Reduced Pressure

Key Terms

Oilproof Hose

AbrasionResistant Hose

Tiflex Hose WA type 38-200

Tiflex Hose AbrasionResistant E type 38-200

Excels in heavy duty and abrasion resistance

Upgraded type of Tiflex Hose E type in abrasion resistance

Smooth inside/outside surface construction oilproof hose

Complies with Food Sanitation Law

※ For more information about each hose, please refer to each product page.※ Working pressure and deformation temperature under reduced pressure are indicated as a rough guide on performance for hose as single body. It depends on hose diameter, metal fixture, fitting method, and usage. For more information, please refer to each product page.

6

440.7 ― -10～70Others

Non-PVCHose

Type -0.1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 2.0 MPa

-1 0 1 2 3 4 5 6 7 8 9 10 15 20 (kgf/c㎡)

Working Pressure Range at 20℃ for Each Hose

55-60

60

40

0.275

0.275 60-70

39

0.05 70

0.1 60-95

0.05 70

ServiceTemperature

Range（℃）

Page

General Hose

Heavy Duty/AbrasionResistant

Hose

WorkingPressure at

40℃MPa

DeformationTemperature underReduced Pressure

（℃)

45-70

1.4

50-65

65

Antistatic Hose

AbrasionResistant

Hose

40

-10～50

-10～50

-10～50

16

11

12

13

39

-20～80

50-60

16

21

-10～50

45-60

0.35

0.7

0.15

1.05

0.25

0.25

Food GradeHose

Oilproof Hose

1MPa = 101972 mmAq

1MPa = 10.1972 kgf/c㎡

0.1 90

45-60 -10～50

0.1 90-110

0.25

0.3 50-70

0.15

1MPa = 1000KPa = 1000000Pa

55-70

1MPa = 7500.62 mmHg

Conversion of Pressure Unit

1MPa = 9.86923 atm

45-65

-10～50

11

21

23

15

23

18

19

-10～50

7

Comparative table

Inch 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 5 6 8mm 19 25 32 38 50 65 75 100 125 150 200

Bending Radius Working Pressure

It is minimum usable bendingradius which is a distance to thecentral axis of hose. Hose shouldnot be used with a shorter bendingradius than the minimum bendingradius.

It is usable maximum pressure inthe range of use from straight pipeto bent pipe with bending radius at20℃. Please note that the workingpressure may change dependingon service temperature, flexuralstate, combination of clamp andband. For general use, hoseshould be used with less pressurethan 1/4 of the allowable value.

It is maximum negative pressurewhich can be applied to a hose atnormal temperature. Hoses cannot be used with any morenegative pressure than that. Inaddition, the allowable reducedpressure gets lower in case thatthe service temperature becomeshigher.

Allowable Reduced Pressure(at normal temperature)


Type Name of Product Diameter Fluid / Application Features

150-500 For air, dust, exhaust air,flue gas

Little airflow loss due to smooth inside surface

Eco-friendly hose.Large diameter, light weight, and flexible.

25-300

For air Continuous usable temperature is 100℃ or lower. Have airtightness.

Heat resistant duct hose with air tightness.

Heat resistant duct hose with air tightness.

Powders and granules (Ironpowder, aluminum powder, metallicpowder, etc)

Using metallic wire for reinforcement

38-200

One of Tiflex Hose GL types, excels in abrasion resistanceand heat resistance

For recovery of oil mist

Air, wood powder, dust50-150 Lightweight type of Tiflex Hose GL type

38-200

55-300 For spot cooler

Stretchable38-300

Freely stretchable and freely fixable

Air (include hot air)

Using oil resistant special material (soft part of hose) whichis hardly hardened against lubricant oil, cutting oil and etc.

16-400

For air conditioning


Continuous usable temperature is 250℃ or lower.


Continuous usable temperature is 400℃ or lower.For equipment for pollutioncontrol and burning

For air conditioning and hotair generator & circulationsystemFor air conditioning and hotair generator & circulationsystem

Industrial Cleaner Hose 38 For cleaner

100-400 For air conditioning Excels in stretchability, bendability, and heat insulatingproperties. Qualified product as flame retardant material.

Key Terms

Flexible and well usability.

OilproofHose

Tiflex Hose Oil ResistantGL type

Spot AirConditioner

HoseTiflex Hose A type

Antistatic Hose

38-300 Self-extinguishing

Ti-Ecolight GL-V type

General Hose

25-200

25-200

50-300

50-300

Tiflex Hose N type

Tiflex Hose GL-2 typeGeneral

Hose

Non-PVCHose

Tiflex Hose AbrasionResistant GL type

AbrasionResistant

Hose

Tiflex Hose GL type

Antistatic HoseTiflex Hose GL-E type

Tiflex Hose GL-ST type

50-300

Heat ResistantHose

Tiflex Hose AP type 38-100

50-300

Tiflex Hose V series FP type

FlameRetardant Hose

Tiflex Hose P/P2 type

Tiflex NH-1 type

Silicone Duct Hose SRDH TS type

Tiflex Hose V series PAL type

Tiflex Hose V series SUStype

Tiflex Hose V series AG type

Silicone Duct Hose SRDH GS type

Tiflex Hose Flame Retardant P type

Ti-Ecolight GL type

38-150 One of Tiflex Hose GL types, using grounding wire25-300 One of Tiflex Hose GL types, transparent and antistatic

32-200 For air, wood powder,dust, food

Dust collection for woodworking machine

Eco-friendly hose.Complies with Food Sanitation Law



8

1MPa = 7500.62 mmHg

1MPa = 10.1972 kgf/c㎡

(kgfc㎡)

Working Pressure Range at 20℃ for Each Hose WorkingPressure at

40℃MPa

Type-1.0

MPa0.101.0

0.050.5

General HoseAvailable

Available(Only φ38, φ50)

Abrasion ResistantHose

Oilproof Hose

0.025

Spot AirConditioner Hose

Antistatic Hose

General Hose

Flame ResistantHose

Available 43Antistatic Hose -

1MPa = 9.86923 atm

-

Conversion of Pressure Unit

1MPa = 101972 mmAq

37

43

N/A

Selectable

34

N/A-20～80

AvailableAvailable

-10～50

-30～80

-10～50

-20～80

-20～80

-20～100

-20～180

-

0.020 -50～150

-0.10 -0.05-0.5

00

0.009

-

0.020-10～50

0.030

0.014

0.030

0.025

0.030

0.030

-10～50

Page

0.030

ServiceTemperature

Range（℃）

Cuff

25

25

35

35

36

36

0.020

0.010Non-PVC

Hose

Heat ResistantHose

0.020

0.026

0.026

0.039 -20～400

-10～50

-

-20～130

0.014

29

30

31

32

-20～250

26

27

27

28

N/A

Available

N/A

AvailableAvailable

N/A

-20～50

Available

41

37Selectable

N/A

N/A

N/A

Available

-50～200

※ For more information about each hose, please refer to each product page.※ Working pressure and deformation temperature under reduced pressure are indicated as a rough guide on performance for hose as single body. It depends on hose diameter, metal fixture, fitting method, and usage. For more information, please refer to each product page.

9

Reliable items focused on fundamentalperformance such as heavy duty, heat resistance,

bending radius and etc.

Used for conveying systemin wide range of industrial fields.

General Hose

10

Hose Structure (Cross-Section View)

・

・

・

Sizes and properties (F3-□)

・


・ Thickness version of Tiflex Hose F-3 type・

・

・Sizes and properties (FF-□)

・

Transparent making it possible toconfirm the contents.

20・50

90 89.0±1.0 99.5 9.5 0.25 [2.5] 55 1,400 1,945

0.60 [6.1] 70 115 220

ApplicationsRef.

Weight(g/m)

NominalDia. (φ)

I.D.(mm)

O.D.(mm)

8.5

6.019.0±0.5 24.5

11.0

167.5 13.0

6108.0

475

1,2000.30 [3.1] 55 800

570

850

375

6.0 275

7.0 0.40 [4.1] 60

Tiflex Hose F-3 type

76.2±1.0 85.1

38 38.1±0.5 44.0

65 63.5±1.0 72.2

25.4±0.5

200

25

90

150

125

50

25

Tiflex Hose FF typeFeatures


76.2±1.0

65 63.5±1.0

127.0±1.5

50 50.8±1.0

38

Light in weight and easy to bendmaking handling easy.Suited for suction and delivery use.

Suction and draining of agricultureand civil engineering work.

50.8±1.0

19

32

19

485

70 450

Features

270

32.0±0.5 38.0 6.5 0.45 [4.6] 65

7.0

32 32.0±0.5 38.2

38.1±0.5 44.5

19.0±0.5 25.0

30.4

58.0

125 127.0±1.5 139.5

150 152.4±1.5

Suited for suction and delivery use.

Applications

65

70

25.4±0.5 31.4 6.0

6.5

Pitch(mm)

WorkingPressure

(20℃)MPa or less/

[kgf/cm2 or less]

100

0.40 [4.1]

0.50 [5.1] 70 240

0.60 [6.1]

0.45 [4.6] 70

Easy to handle due to lightweight andeasy bending.

900

0.35 [3.6] 65 750

Suction and draining of civilengineering work.

8.0 0.35 [3.6]

6.0

60.0

0.35 [3.6]88.0 9.0

1,00065102.0 9.5 0.30 [3.1]

11.0 0.30 [3.1]

115.0 10.0 0.30 [3.1]

274

300

660

2,300 3,700

2,270

1,350

560 955

350

4,800

2,830

1,700

1,290

0.25 [2.5] 55

0.50 [5.1] 65

0.30 [3.1] 60

1,360

10・202,900 8,450

1,440

2,700

20

10・20

20・50

20

400

75

0.25 [2.5] 55 1,450100 101.6±1.5 113.2 10.0 2,500

200 203.0±1.5 221.5 17.2

4,180

0.20 [2.0] 45 3,000 7,170

224.0

152.4±1.5 168.6

89.0±1.0

203.0±1.5

101.6±1.5

141.0 55

NominalDia. (φ)

I.D.(mm)

O.D.(mm)

75

100 60

73.5 8.5

65

17.2 0.20 [2.0] 50

5513.0 0.25 [2.5]

BendingRadius

(mm or more)

0.25 [2.5] 50 2,500

0.25 [2.5] 50 2,900

3,100

9.0

Std.Length

(m)

Ref.Weight

(g/m)

Std.Length

(m)

Pitch(mm)

WorkingPressure

(20℃)MPa or less/

[kgf/cm2 or less]

DeformationTemp.

(-0.1MPa/-760mmHg)

(℃)

BendingRadius

(mm or more)

DeformationTemp.

(-0.1MPa/-760mmHg)

(℃)

Pitch

Flexible PVC (Transparent)Rigid PVC (Gray)

I.D.

O.D

.

Pitch

Flexible PVC (Transparent)Rigid PVC (Gray)

I.D.

O.D

.

11


・

・

・

Sizes and properties (WT-□)

・

*

*

****

* are able to connect directly to SGP duct. ( ) are custom-made products.※ Please consult us for φ165 (Left-handed).

Transparent making it possible toconfirm the contents.Suited for suction use.

Features

※ WT type is right-handed. (However, following ※ are left-handed.)Tiflex Hose WT type

Spiral shape of outside makes itaffluent in flexibility.

0.30 [3.1] 60 707.5 280

ApplicationsNominalDia. (φ)

32 32.0±0.5 39.0 8.5 0.30 [3.1] 60 80 33051238 38.0±0.5 46.2 9.0 100

10.00.25 [2.5] 55 11011.0 7100.30 [3.1] 60

0.25 [2.5] 55 120 720

25 25.0±0.5 31.6

50 50.6±1.0 59.8

(※48.6) 49.0±0.5 61.7

1,12065 63.5±1.0 74.1 14.0 0.25 [2.5] 55 150 1,040

(※60.5) 60.5±1.0 74.0

75 76.4±1.0 88.8 1,355

0.25 [2.5] 55 140

15.0 0.25 [2.5] 55 200

13.0

350 2,500125 127.0±1.5 146.0 22.0

(※115) 115.0±1.5 132.0 17.0117.2 16.5 0.20 [2.0] 55

90 88.9±1.0 104.3 16.0

20

20・50

0.15 [1.5] 50 550 4,605

300 2,4800.20 [2.0] 55

15010・20

Suction and draining of agriculture andcivil engineering work.

0.25 [2.5] 55 250 2,060100 101.6±1.5

0.10 [1.0] 45 1,000 8,200200 203.7±1.5 229.7 23.0152.4±1.5 173.6 22.0

0.15 [1.5] 55 400 3,400

I.D.(mm)

O.D.(mm)

Pitch(mm)

WorkingPressure

(20℃)MPa or less/

[kgf/cm2 or less]

DeformationTemp.

(-0.1MPa/-760mmHg)

(℃)

BendingRadius

(mm or more)

Ref.Weight

(g/m)

Std.Length

(m)

Pitch

Flexible PVC (Transparent)

Rigid PVC (Transparent)

I.D.

O.D

.

12


・

・

・

・ Sizes and properties (WS-□)

・

Working pressure is different depending on fitting method of metal fixture and band.(Thorough care should be observed when fitting at work sites.) ( ) are custom-made products.

WS type, Outer Socket Caulking

WS type, R-Power Band Tightening

FeaturesHeavy duty type of WT type.

Tiflex Hose WS type

32034.4

O.D.(mm)

908.0 0.50 [5.1] 7025Applications

NominalDia. (φ)

I.D.(mm)

32 31.8±0.538 63038.1±0.5

4409.0 0.50 [5.1] 70 120

93050 50.8±1.0 62.5 10.0 0.50 [5.1] 65 20065 63.5±1.0 80.0 0.50 [5.1] 60 250

25.4±0.5

14.3

9.0 0.50 [5.1] 65 15042.0

1,360

49.5Suction and draining for civilengineering work and etc.

0.50 [5.1] 60 35075 76.0±1.0 91.4 1,70015.1

127.0±1.5 22.02,620100 101.6±1.5 121.0 16.5 0.50 [5.1] 60 500

600550.50 [5.1] 4,405150 152.4 182.0 24.0 0.50 [5.1] 55 750

152.0125

32.0

5,800200 203.0 237.0 28.0 0.50 [5.1] 50 1,200 8,700

※ WS type is right-handed.

Excels in pressure resistance due toreinforcement cord.Light in weight and excels in flexibility.

Suited for delivery and suction use.WorkingPressure

(20℃)MPa or less/

[kgf/cm2 or less]

DeformationTemp.

(-0.1MPa/-760mmHg)

(℃)

BendingRadius

(mm or more)

Ref.Weight

(g/m)

Std.Length

(m)

Pitch(mm)

(250) 254.0 293.0(300) 304.8 350.0 34.0

50.25 [2.5] 45 2,100 19,0000.25 [2.5] 50 1,800 11,800

50

20・50

20・(50)

10・20

+2.0-1.5+2.0-1.5+3.0-2.0+3.0-2.0

Pitch

Flexible PVC (Transparent)Rigid PVC (Rose-red)

I.D.

O.D

.

Flexible PVC (Transparent)Reinforced cord

+2.0-1.5+2.0-1.5+3.0-2.0+3.0-2.0

13

Heavy Duty/Abrasion Resistant Hose

Usable when pressure resistance is necessary.

In addition, these hoses excel in durabilitycompared with general plastic hoses by use of

special material for abrasion resistance.

14


・

・

・ Dimension and property (WR-□)

Applications・

・

・

Working pressure is different depending on fitting method of metal fixture and band.

(Thorough care should be observed when fitting at work sites.)

( ) are custom-made products.

Working pressure by fitting method of WR type and metal fixtureUnit: MPa {kgf/c㎡}

WR type, Outer Socket Caulking

WR type, R-Power Band Tightening and Welding

1.00 [10.2]

303.0

Diameter (φ)FittingMethod

Inner TubeExpansion

Outer TubeCaulking

R-PowerBand Welding

75 or less

0.50 [5.1]

38.1±0.5 52.3

Muddy water suction and pressuredischarge in civil engineering work.

65 63.5±1.0 81.8

75 76.2±1.0 97.0

100 125

1.00 [10.2] 0.50 [5.1]

―

1.00 [10.2] 0.50 [5.1]

1.00 [10.2] 1.00 [10.2]

0.7 [7.1]

1.00 [10.2] ―

0.30 [3.1]

1.00 [10.2] 1.00 [10.2] 1.00 [10.2] 1.00 [10.2] 1.00 [10.2] ―

1.00 [10.2] 1.00 [10.2]

20・50

20・(50)

750 2,200

1,250 4,200

10.0 1.00 [10.2] 65

960

1,300

1,700

450

9.0

WorkingPressure

(20℃)MPa or less/

[kgf/cm2 or less]

DeformationTemp.

(-0.1MPa/-760mmHg)

(℃)

Features

Pitch(mm)

1.00 [10.2] 65

NominalDia. (φ)

I.D.(mm)

Suction and discharge of muddywater such as muddy water shield andreverse.

O.D.(mm)

50 50.8±1.0 66.8

38

14.3 1.00 [10.2] 65 550

15.1 1.00 [10.2] 65

100 101.6±1.5 128.0 16.5

156.1 22.0

150 152.4±2.0 187.0 24.0

125 127.0±2.0

527.0 1.00 [10.2] 50 4,000

※ WR type is right-handed.

18,600

50 5,000 21,50028.0 0.50 [5.1]

1.00 [10.2]245.0 25.0 60 2,250

65

304.0±2.5 353.0

203.0±2.0

(250) 254.0±2.5

Tiflex Hose WR type

Long lengths available makingefficiency upgrading of piping workpossible.

(300)

Excels in pressure resistance with itsworking pressure 1.0MPa {10.2kgf/c㎡} (In case of outer tube caulking orinner tube expansion metal fitting.)Excels in abrasion resistance by useof special material for inner layer.

Suction and discharge in case thatpressure resistance and abrasionresistance are required. 200

BendingRadius

(mm or more)

Ref.Weight

(g/m)

1.00 [10.2] 60 2,000 7,260

1.00 [10.2] 60

1.00 [10.2]

400

Std.Length

(m)

150 200 250 300

12,800 10・20

1,500 5,595

50

Pitch

Flexible PVC (Black)Rigid PVC (Orange)

I.D.

O.D

.

Special material for abrasion

Reinforced cord

15

Hose Example of Metal Fixture Fitting Structure (Cross-Section View)

Sizes and properties (WRS-□)

・

・

・

Applications・

・

・

・


Features Sizes and properties (FC-□)

・

・・

Applications

・

・

10・202.00 [20.4] 65 3,250 14,500200 203.0±2.0 249.0 25.0

Excels in pressure resistance due tolow stretchability under pressure.Excels in abrasion resistance.

DeformationTemp.

(-0.1MPa/-760mmHg)

(℃)

BendingRadius

(mm or more)

Excels in abrasion resistance by useof special material for inner layer.

NominalDia. (φ)

I.D.(mm)

O.D.(mm)

Pitch(mm)

Working pressure is 2.0MPa{20.4kgf/c㎡}. (in the case of innertube expansion metal fitting.)

Fluid can flow smoothly because innersurface is flat and smooth by use ofinner tube expansion metal fitting (Inthe case that hose and fixture arefitted by us.)

Pressure discharge of high viscositysubstance.

Pressure discharge of mortar at shieldconstruction.

38

50 60 700

38.5±1.0 54.0 9.0 1.50 [15.3] 60

1.50 [15.3]

9,400 20

51.0±1.0 65.020・50

※ FC type is right-handed.

500

1,50010.5

1,180

Suction and discharge in case thatpressure resistance and abrasionresistance are required.

Tiflex Hose FC type (Mortar Hose)

WorkingPressure

(20℃)MPa or less/

[kgf/cm2 or less]

DeformationTemp.

(-0.1MPa/-760mmHg)

(℃)

BendingRadius

(mm or more)

Ref.Weight

(g/m)

Std.Length

(m)

20・50

NominalDia. (φ)

I.D.(mm)

O.D.(mm)

Pitch(mm)

Tiflex Hose WR-S type

Features

16.5 2.00 [20.4]

(Custom-Made-Product) ※ WR-S type is right-handed.

Std.Length

(m)

Suction and pressure discharge ofsand, gravel and sludge.

Long lengths available makingefficiency upgrading of piping workpossible.

192.5 24.0150 152.4±1.5

The metal fitting shall consist of an inner tube expansion system so that the hose thoroughlyexhibits its heavy duty performance.

Suction and discharge of muddywater such as muddy water shield andreverse. (Especially suited for sludgeremoval piping of shield.)Muddy water suction and pressuredischarge in civil engineering work.

2.00 [20.4] 65

Ref.Weight

(g/m)

100 101.6±1.5 134.0 5,300

WorkingPressure

(20℃)MPa or less/

[kgf/cm2 or less]

65 1,500

2,050

Pitch

Flexible PVC (Black)Rigid PVC (Rose-red)

I.D.

O.D

.

Special material for abrasionReinforced cord

Pitch

Flexible PVC (Gray)Rigid PVC (Gray)

I.D.

O.D

.

Special material for abrasionReinforced cord

16

Antistatic Hose

Have a beneficial effect on antistatic intransportation of powder, grain, and plastic pellet.

17


Sizes and properties (W[D]-□)

・

・

Applications

・

・

Antistatic Effect

Measured each maximum voltage which is charged to φ38mm hoses afterrigid PVC pellets were conveyed.

These are not standard values, but testvalues.

Tiflex Hose Antistatic W type

27025 25.0±0.5 31.8 7.6 0.30 [3.1]

32.0±0.5 40.5 8.0 0.25 [2.5]

100 570

60 70

55 80

20・(50)

20・50

Conveying of powdersand grains.

2,100

2,300100 101.6±1.5 117.0 16.5

0.15 [1.5] 50 250

0.15 [1.5] 50 300

90 89.0±1.0 104.0 16.5

50 150 1,300

76.2±1.0 90.0 15.0 0.20 [2.0] 50 200 1,650

63.5±1.0 76.5 14.5 0.25 [2.5]

Pitch(mm)

WorkingPressure

(20℃)MPa or less/

[kgf/cm2 or less]

Excels in staticprevention effects by useof anti-static build-upPVC.Transparent making itpossible to confirm thecontents.

38 38.1±0.5 46.5 10.0 0.25 [2.5]

32

Features

NominalDia. (φ)

I.D.(mm)

O.D.(mm)

0.25 [2.5] 50

Ref.Weight

(g/m)

Std.Length

(m)

DeformationTemp.

(-0.1MPa/-760mmHg)

(℃)

BendingRadius

(mm or more)

1,200150

420

55

50 120 890

50 120 94062.0 11.0 0.25 [2.5]

12.0 0.25 [2.5]58.0

Conveying of plasticpellets.

55.0 10.0

75

60 60.5±1.0 72.0 12.0

65

50

45 46.0±1.0

48.6 49.0±1.0

50 120 8400.25 [2.5]

50.8±1.0

Pitch

Antistatic Flexible PVC(Transparent)

I.D.

O.D

.

Rigid PVC (Gray)

GL-E type

E type, AbrasionResistant E type

Antistatic W type

WT type

GL-ST type

(In case that grounding wire is connected to conductive material)

Charged Voltage (V)

18


Sizes and properties (E-□)

・

・

・ Suited for delivery use.

・

・ ( ) are custom-made products. ● For antistatic effect, please refer to P18.

※

55 1,000Conveying of plasticpellets.

75 76.2±1.5

9.5

0.40 [4.1] 55

1.Apply a knife along thehose rigid part and cut thesoft part. At this time, makesure that copper wireremains at the edge face ofhose.

101.6±1.5 116.0

9.088.5

90 89.0±1.5 103.0

Pulling out method of copper wire for E type & Antistatic E type

0.30 [3.1]

20・50

20

20・50

2,180

1,840

1,320

1,630

730

50

20・50

50

3.Make cut into edge face ofthe hose along copperwire.Be careful not to cutyourself with a knife.

2.After the cut of requiredlength of hose soft partfor pulling out copperwire, cut in hose rigidpart at around of nickend with a knife, and offthe nicked part.

4.Pull out the copper wire

2,80010.0 0.30 [3.1] 55 1,100Conveying ofpowders and grains.

100

8.5 0.40 [4.1] 60 560

8.0 0.40 [4.1] 60 520Applications (60) 61.2±1.0 72.0

65 63.5±1.0 75.4

967

50 50.8±1.0 61.0 8.0 0.40 [4.1] 60 450 1,100

60 400 900

(48.6) 49.3±1.0 58.5 8.0 0.40 [4.1] 60 430

0.45 [4.6]

38 38.1±1.0 46.8 7.0

BendingRadius

(mm or more)

Ref.Weight

(g/m)

Std.Length

(m)

60 320 615

60 340 7000.50 [5.1]

(45) 44.2±1.0 55.0 7.8

WorkingPressure

(20℃)MPa or less/

[kgf/cm2 or less]

DeformationTemp.

(-0.1MPa/-760mmHg)

(℃)

Transparent makingit possible to confirmthe contents.

(32) 32.0±1.0 40.5 6.5 0.50 [5.1]

Tiflex Hose E type

Features

NominalDia. (φ)

I.D.(mm)

O.D.(mm)

Pitch(mm)

Excels in antistaticeffect by use ofgrounding wire.

Thorough attention should be placed in abrasion of the inner surface byreason that fragments of the grounding wire will get mixed into the conveyedmatter when the grounding wire becomes exposed by abrasion of the innersurface during use of the E type for which reason the hose should bereplaced with a new hose beforehand.

Copper wire

Hard part cut in

Pitch

I.D.

O.D

.

Rigid PVC (Transparent)Flexible PVC (Transparent)

Grounding wire

19

Excels in durability compared with general plastichoses by use of abrasion resistant special

materials.

AbrasionResistant Hose

20


Sizes and properties (WA-□)

・

・

・

・・

HoseExample of Metal Fixture Fitting Structure (Cross-Section View)

Sizes and properties (E[M]-□)

・

・

・

・・

● For antistatic effect, please refer to P18.

200

Tiflex Hose Abrasion-Resistant E type

Pressure discharge of iron powder,sand blast and etc.


Conveying of powders and grains.

65

75

125Applications

60 370

For recovery of burned ash.For conveying grains such as rice,flour, and corn.

38 38.1±1.0 47.8

0.10 [1.0]

Excels in antistatic effect by use ofgrounding wire. 50

50 50.8±1.0 62.0 8.0 0.40 [4.1] 60 500 1,200

7.0

570

Std.Length

(m)

Features

NominalDia. (φ)

I.D.(mm)

O.D.(mm)

Pitch(mm)

WorkingPressure

(20℃)MPa or less/

[kgf/cm2 or less]

DeformationTemp.

(-0.1MPa/-760mmHg)

(℃)

Ref.Weight

(g/m)

0.10 [1.0] 110

0.10 [1.0] 110

8000.50 [5.1]

110 180

BendingRadius

(mm or more)

220

110 600 3,950

4,800

Applications

14.0 0.10 [1.0] 11065 63.5±1.0

15.092.075 76.2±1.0

62.6 10.0

77.0

0.10 [1.0]

130 570

Excels in abrasion resistance by useof abrasion resistant plastic asmaterial of hose inner layer.

63.5±1.0 76.5 8.5 0.40 [4.1] 60 620 1,495

Ref.Weight

(g/m)

Std.Length

(m)

20・50

860

2,070

2,620

1,200

Excels in heat resistance, can standagainst 100℃ hot-blast in straightduct.Excels in antistatic effect by use ofhard steel wire.

38 38.1±0.5

50 50.8±1.0

48.0 9.0 0.10 [1.0] 110

Tiflex Hose WA type ※ WA type is right-handed.

Features

NominalDia. (φ)

I.D.(mm)

O.D.(mm)

Pitch(mm)

WorkingPressure

(20℃)MPa or less/

[kgf/cm2 or less]

DeformationTemp.

(-0.1MPa/-760mmHg)

(℃)

BendingRadius

(mm or more)

100 101.6±1.5 120.5 16.5

125

300 1,560

90 89.0±1.0 107.0 16.0 0.10 [1.0] 110 380

Pressure discharge of gravel, mineralslurry, and sandblast.

150 110 900

126.5±1.5 148.0 22.0

152.0±1.5 173.0 22.0

0.10 [1.0]20

205.0±1.5 230.0 24.0 0.10 [1.0] 90 1,000 7,900 10

150

76.2±1.0 90.8 9.0

90 89.0±1.5 102.6 9.5

100 101.6±1.5

0.40 [4.1] 55 800 2,130

0.30 [3.1] 55 1,100 2,720

115.6 10.0 0.30 [3.1] 55 1,120 3,000

0.20 [2.0] 50 1,980

127.0±2.0 141.4 11.0 0.25 [2.5]

151.6±2.0 168.0 13.0

45 2,970 9,330

50 1,650 4,030

20・50

20

10

6,400

200 204.0±2.0 224.0 16.8 0.20 [2.0]

Pitch

I.D.

O.D

.

Special synthetic rubber(Black) Hard steel wire

Olefinic resin

Pitch

I.D.

O.D

.

Synthetic rubber(EPDM) Hard steel wire

Olefinic resin

Pitch

I.D.

O.D

.Flexible PVC (Transparent)

Grounding wireAbrasion resistant urethaneresin(Transparent)


21

Food Grade andOil Resistant Hose

Food Grade HoseFairly trusted by food industry as food conveying

hose due to high operating efficiency.Material of the portion in contact with foodcomplies with the Standard of Apparatus,containers and packaging based on Food

Sanitation Act.

Oil Resistant HoseSuited for conveying of oil and alcohol by use ofgood oil resistant material. In addition, provides

same level of features as general hoses.

22


Sizes and properties (F[SH]-□)

・・

・

Applications ( ) are custom-made products.

・ ※

・


Features Sizes and properties (F[Y]-□)

・

・

・

Applications

・

Can be conveyed even fat, oils andfatty foods.

Complies with Standard of Apparatus,Containers and Packaging based onJapanese Ministry of Health, Labourand Welfare Notification No.201,Food Sanitation Act.

Suited for delivery use.

Conveying of mineral oil, animal/plantoil, alcohol and etc.

50

240

620

Light in weight and easy to bendmaking handling easy.

70 350 760

25 25.4±1.0 33.4

(Custom-made product)※Oil Resistant F type is right-handed.

Using special material (soft part of thehose) excels in oil resistance.

NominalDia. (φ)

I.D.(mm)

O.D.(mm)

Pitch(mm)

WorkingPressure

(20℃)MPa or less/

[kgf/cm2 or less]

DeformationTemp.

(-0.1MPa/-760mmHg)

(℃)

BendingRadius

(mm or more)

Ref.Weight

(g/m)

Tiflex Hose Food F type

Features

NominalDia. (φ)

I.D.(mm)

O.D.(mm)

Pitch(mm)

WorkingPressure

(20℃)MPa or less/

[kgf/cm2 or less]

DeformationTemp.

(-0.1MPa/-760mmHg)

(℃)

BendingRadius

(mm or more)

Ref.Weight

(g/m)

Std.Length

(m)

25 25.4±0.5 33.6 6.5 0.55 [5.6]

50

70 210 480

690

1,200

1,600

580

(20)・50

20・50

(32) 32.0±0.5 40 6.5 0.55 [5.6] 70 320

38 38.1±0.5 46.5

50 50.4±1.0 61.4

7.0 0.50 [5.1] 70 340

8.0 0.50 [5.1] 65 450

9.0

(65) 63.5 75.0

(75) 76.2 87.8

8.5 0.45 [4.6] 65 560

0.45 [4.6] 65

60

730

1,100 3,000

2,010

0.35 [3.6](100) 101.6 115.4 10.0

340

20(125) 127.0 141.8 11.0 0.30 [3.1] 55 1,500 3,820

Std.Length

(m)

0.6 [6.1] 70

32 31.8±1.0 40.2 5.5

4.5

0.55 [5.6] 70

Nonuse of phthalate compounds.

For conveying of alcohol, soy sauce,and soft drinks.

0.50 [5.1]38 38.1±1.0 46.1 6.5

Tiflex Hose Oil Resistant F type

Thorough attention should be placed in abrasion of the inner surface by reason thatfragments of the rigid material will get mixed into the conveyed matter when the rigid partbecomes exposed by abrasion of the inner surface during use for which reason the hoseshould be replaced with a new hose beforehand.

480

50 50.8±1.5 61.2 7.0 0.50 [5.1] 65 500 1,200

65 63.5±1.5 74.5 7.5 0.50 [5.1] 65 600 1,640

65 770 2,13075 76.2±1.5 87.8 8.5

100 101.6±2.0 116.2

0.50 [5.1]

3,300 3010.0 0.40 [4.1]

For conveying the other foods.

60 1,150

+1.5-0.5+1.5-0.5+2.0-0.5+2.0-0.5

Pitch

Flexible PVC for food(Transparent)Rigid PVC (White)

I.D.

O.D

.

Pitch

Oil resistant flexible PVC (Black)

Rigid PVC (White)

I.D.

O.D

.

23

Duct Hose

Reliable item focused on fundamentalperformance.

Used for conveyance system of wide industrialfield which requires higher air/powder conveying

performance and abrasion performance.

24


・・・

Sizes and properties (GL-□)

・・

・

( ) are custom-made products. ※ Please consult us for φ225, φ275.

● Exclusive cuff is available.


・

・・

・ Sizes and properties (GL2-□)

・

Can be use for air conveying of generalmachineries including woodworkingmachines, powder spraying machines,and general dust collectors.

Ref.Weight

(g/m)

Std.Length

(m)

260 2,910316.4 20.0 3,370

10・200.01 [0.1]

20.0

NominalDia. (φ)

I.D.(mm)

O.D.(mm)

Pitch(mm)

1,710

NominalDia. (φ)

I.D.(mm)

O.D.(mm)

Pitch(mm)

WorkingPressure

(20℃)MPa or less/

[kgf/cm2 or less]

Allowable Reduced

Pressure(20℃)

KPa or less/[mmHg or less]

BendingRadius

(mm or more)

Ref.Weight

(g/m)

17.5

0.03 [0.3] -18.0 [-140] 80 39075 76.2±1.5 83.7 17.00.04 [0.4] -27.0 [-210] 70

5065 63.5±1.5 70.6 15.0

57.8 15.0

Features

For air conditioning.

0.01 [0.1]250 252.0±2.0 265.7

Suited for collecting use of powdersand grains for dust collect machine.

300 303.0±2.0

0.01 [0.1] -6.0 [-45] 210

0.04 [0.4] 60

310

BendingRadius

(mm or more)

-3.0 [-23]

200 202.0±2.0 215.0 17.5 2,290

-21.0 [-160]

0.02 [0.2] -10.0 [-78] 180-14.0 [-110] 165

0.02 [0.2]

90 980101.6±1.5 112.0 14.5 0.03 [0.3]

Std.Length

(m)

Tiflex Hose GL typeFeatures

Light in weight and easy to carry.Excels in flexibility.Excels in chemical resistance such asacid and alkalis. In addition, its low flowresistance makes high conveyingcapacity attainable.

45 440

300

100

(175)

(115)125150

(165)

114.5 125.3 17.5

0.02 [0.2]20.0 0.02 [0.2]

0.02 [0.2]127.0±1.5 137.2 17.5

-4.0 [-30] 160 882150 152.4±1.5 161.2 20.0-6.0 [-45] 135125 127.0±1.5 135.8

152.4±1.5 163.8

-9.0 [-70]0.02 [0.2]

WorkingPressure

(20℃)MPa or less/

[kgf/cm2 or less]

Allowable Reduced

Pressure(20℃)


-43.0 [-330]

-5.0 [-35]

50.8±1.5

175.0±1.5

110 500735

20

240330

100 101.6±1.5 109.7 17.0

-19.0 [-150]-19.0 [-150]

17.5 0.02 [0.2] -14.0 [-110]165.4 177.4

90

187.0 17.5

115 1,050120 1,100150 1,510

0.02 [0.2]1,800

89.0±1.5 98.6 14.5 0.03 [0.3] -32.0 [-250] 85 730

60075 76.2 85.8 14.5 0.04 [0.4] -32.0 [-250] 75 650

50 48065 63.5 72.6 12.0 0.04 [0.4] -65.0 [-500] 6050 50.8 59.9 12.0 0.05 [0.5] -65.0 [-500]

53.5 12.0 0.05 [0.5] -65.0 [-500]38 38.1±1.0 45.9 9.0 -65.0 [-500] 35

8.0 0.06 [0.6] -65.0 [-500] 32

Applications

(45) 43.7±1.0

7.625 25.0±0.8 32.432 32.0±1.0 39.8

20

Tiflex Hose GL-2 type

Lighter in weight than current ducthoses (About 50% lighter in weightthan our other hoses.)

(Custom made product)

-65.0 [-500] 25 1850.06 [0.6]

3700.06 [0.6]

Excels in flexibility.Excels in chemical resistance such asacids and alkalis.Low flow resistance makes highconveying capacity attainable.

For air conditioning.

Applications

+1.5-1.0+1.5-1.0+1.5-1.0

+2.0- 0

+2.0- 0

Pitch


I.D.

O.D

.

Pitch


I.D.

O.D

.

25


・・・

・

Sizes and properties (N-□)

・・

・

( ) are custom-made products. ※ φ350x20m and φ400x20m are also custom-made products.


BendingRadius

(mm or more)

Ref.Weight

(g/m)

Std.Length

(m)For air conditioning.O.D.(mm)

Pitch(mm)

WorkingPressure

(20℃)MPa or less/

[kgf/cm2 or less]

Allowable Reduced

Pressure(20℃)


ApplicationsNominalDia. (φ)

Excels in chemical resistance such asacids and alkalis.

FeaturesLight in weight and easy to carry.Excels in flexibility.

32 32.5±0.7

I.D.(mm)

Can be used for air conveying andexhaust of general machineriesincluding woodworking machines,powder spraying machines, andgeneral dust collectors. (45) 45.5±1.0

7.5 0.06 [0.6] -100.0 [-760]Suited for collecting use of powdersand grains for dust collect machine. 16 16.7±0.7 20 110

20

19 19.5±0.7 24.0 8.0 0.06 [0.6] -100.0 [-760]21.2

23 13025 25.5±0.7 30.0 9.0 0.06 [0.6] -100.0 [-760] 25 170

37.0 9.0 0.06 [0.6] -100.0 [-760] 35 21038 38.1±0.7 42.6 9.0 0.06 [0.6] -100.0 [-760] 40 250

52.3 11.5 0.05 [0.5] -100.0 [-760] 45 40050 50.8±1.0 57.6 11.5 0.05 [0.5] -100.0 [-760] 55 440

90 89.0 96.0

125 127.0 134.5100 102.2 109.0

0.04 [0.4] -71.0 [-550] 7065 63.5 70.5 54075 75.5 82.5 11.5 0.04 [0.4] -32.0 [-250] 80 770

11.5

11.5 0.03 [0.3] -32.0 [-250] 9014.5

0.02 [0.2] -19.0 [-150] 120

9100.03 [0.3] -21.0 [-160] 100 970

1,300150 152.6 160.0 15.5 0.02 [0.2] -14.0 [-110] 130 1,590

15.5

(175) 177.0 184.0 16.5 0.02 [0.2] -13.0 [-100] 170 1,8402,110200 204.1 211.5 16.5

16.50.01 [0.1] -8.0 [-62] 200

4,3000.01 [0.1] -6.0 [-45] 250 3,600

16.5 0.01 [0.1] -5.0 [-35] 300

10

10・20

-3.0 [-23] 350 5,000400 5,71017.0 0.005 [0.05] -2.0 [-15]

Tiflex Hose N type Since wire might be exposed from a hose end,hose should be handled carefully.

350 354.0 363.5 17.0 0.01 [0.1]

Less thermal deformation by use ofmetal wire as core wire.

400 405.0 414.5

300 303.0 312.5250 252.0 261.5+2.5

-2.0+3.0-2.0+3.0-2.0

+1.5- 0.5

+2.0-1.5

+1.5- 0.5

+1.5- 0.5

+2.0- 0.5+2.0- 1.0

+2.0- 1.5+2.0- 1.5

+3.0-2.0

Pitch

Flexible PVC (Gray)Rigid PVC coating (Gray)

I.D.

O.D

.

Hard steel wire

26


・

・

・ Sizes and properties (GL[M]-□)・

・・

・

・・

Structure Sizes

※ The hose is right-handed.


・

・・

Sizes and properties (GL[Y]-□)

・

・

Applications

Tiflex Hose Oil Resistant GL type

For conveying and exhaust air in theplace where oil scatters.

Applications

50 50.8 59.9

For recovery of oil-mist of lathe, millingmachine, and machine tool.

Features

61.8

2,290

30

38 38.1±1.0 46.0 9.0 0.05 [0.5] -65.0 [-500] 45 340

17.5 0.01 [0.1] -6.0 [-45] 210200 202.0±2.0 215.0

0.03 [0.3]0.03 [0.3]0.02 [0.2]

O.D.(mm)

38 38.1±1.0 45.9

WorkingPressure

(20℃)MPa or less/

[kgf/cm2 or less]

0.05 [0.5]0.04 [0.4]0.04 [0.4]

23.5

Pitch(mm)

10.514.016.5

Features

O.D.(mm)

Suits for conveying of powders andparticles, dust collection, hot airconveying and exhaust.

Excels in weather resistance.

Excels in abrasion resistance as well asusable in a wide temperature rangefrom low to high temp. (about -30 ~80℃)

NominalDia. (φ)

I.D.(mm)

980

Allowable Reduced

Pressure(20℃)


Its low flow resistance makes highconveying capacity attainable.

Duct collection, conveying and exhaustrequiring abrasion resistance,conductivity and heat resistance.

90 89.8±1.5 101.4

-65.0 [-488]50 50.8±1.5

780

BendingRadius

(mm or more)

Ref.Weight

(g/m)

60 500600700

7065 63.5±1.5 74.7 -65.0 [-500]-32.0 [-250] 80

100 102.5±2.0 114.6 18.0

NominalDia. (φ)

75 76.2 85.8

125 127.0±1.5 137.5 17.5 -19.0 [-150] 120

-32.0 [-250] 100-21.0 [-160] 105

Allowable Reduced

Pressure(20℃)


-65.0 [-500] 50

38

152.4±1.5 163.8 17.50.02 [0.2]0.02 [0.2] -14.0 [-110] 150

125 126.0±2.0 140.6 -19.0 [-150] 125150

150

WorkingPressure

(20℃)MPa or less/

[kgf/cm2 or less]

1,280

1,350

20

155 1,660

BendingRadius

(mm or more)

Ref.Weight

(g/m)

Std.Length

(m)

600

1,100

Using special material (for hose softpart) with abrasion resistance which ishardly hardened against lubricant oil,cutting oil, and etc.

Hot air conveying and exhaust.26.0

152.0±2.0

Exclusive cuff

167.0 24.0223.0

NominalDia. (φ)

Tiflex Hose Abrasion Resistant GL type ※ Abrasion Resistant GL type is right-handed.

-6.0 [-45] 190 2,360200 208.0±2.0

Excels in conductivity and endowed withantistatic effects.

-14.0 [-110]

Conveying of powders and grains.

0.02 [0.2]0.01 [0.1]

3000.06 [0.6] -65.0 [-500] 35

B(mm)

T(mm)

φC(mm)

L(mm)

Conveying of iron powder, aluminumpowder, metal powder, etc.

I.D.(mm)

9.0

Pitch(mm)

75 76.2±1.5 87.6

Conveying of wooden chips, pieces ofpaper and hulled grains.

Light in weight and excels in flexibility.

17.0

48065 63.5 72.6 12.0 0.04 [0.4] -65.0 [-500] 60

12.0 0.05 [0.5]

65090 89.0±1.5 98.6 14.5

14.5 0.04 [0.4] -32.0 [-250] 75

100 101.6±1.5 112.0 14.5

Std.Length

(m)

20

0.03 [0.3] -21.0 [-160] 90 9800.03 [0.3] -32.0 [-250] 85 730

A(mm)

I.D(mm)

3850

71 37.575 37

Material

Synthetic Rubber(EPDM)51 40 3 63.3

40 3 47

+1.5-1.0

+1.5- 1.0

+1.5- 1.0

Pitch

Synthetic rubber (EPDM)

Olefinic plastic (Black)

I.D.

O.D

.

Pitch

Oil resistant flexible PVC (Ivory)Rigid PVC (Ivory)

I.D.

O.D

.

27


・

・Sizes and properties (GLE-□)

・

・

・

・● Exclusive cuff is available.

● For antistatic effect, please refer to P29.

Pulling out and cutting method of grounding wire

Setting method of antistatic grounding wire

Dust collection of wood workingmachine and pneumatic conveying ofpowders.

0.02 [0.2]

0.02 [0.2]

0.03 [0.3]

17.5

0.03 [0.3]

Indoor piping of clean room wherestatic electricity is undesirable.

150 152.4±1.5

125

-14.0 [-110]

-19.0 [-150]

168.8

65 63.5 72.6

-32.0 [-250]

0.04 [0.4] -32.0 [-250]

12.0

9014.5

17.5 120

14.5

85

100

90 89.0±1.5 98.6 14.5

101.6±1.5 112.0 -21.0 [-160]

-65.0 [-500] 50

75 640

35

520

630

20935

950

340

1,430

1,120

150

0.06 [0.6] -65.0 [-500]

50 50.8 59.9

38 38.1±1.0 44.5

12.0 0.05 [0.5]

Cutting of hose and exposure ofgrounding wire are easy.

O.D.(mm)

Low in flow resistance making itpossible to improve the conveyingcapacity.

9.0

Tiflex Hose GL-E type

Grounding can be done by utilizingthe grounding wire put through thehose rigid part by which worriescaused by the build-up of staticelectricity are overcome.

Features

127.0±1.5 138.2

Applications 0.04 [0.4] -65.0 [-500] 60

75 76.2±1.5 84.5


Ref.Weight

(g/m)

Pitch(mm)

WorkingPressure

(20℃)MPa or less/

[kgf/cm2 or less]

BendingRadius

(mm or more)

Std.Length

(m)

NominalDia. (φ)

I.D.(mm)

Allowable Reduced

Pressure(20℃)


+1.5- 1.0

+1.5- 1.0

Apply a knife along thehose rigid part and cut thesoft part.

Cut a nick into the hoserigid part with a knife.

Bend the nicked part of thehose rigid part with handsseveral times and breakthis part.

Slowly pull off the hoserigid part.

Connection with Metal Fixture Connection with Steel Pipe Connection with Plastic Pipe

Grounding wire Grounding wire

Flange metal fixture

In case that excusive cuff which is fittedthe hose connects with a metal fixture.

In case that the cut hose connects with asteel pipe.

Should be grounded directly withgrounding wire is coming out from thehose in case of the connection which isdifficult to ground.

Grounding wire

Pipe which is not groundedsuch as plastic pipe

Steel Pipe

Pitch

Flexible PVC (Transparent)Rigid PVC (Transparent)

I.D.

O.D

.

Grounding wire

28


・・

・

Sizes and properties (GL[ST]-□)・

・

・

( ) are custom-made products.


Antistatic Effect

20.0

Measured each maximum voltage which is charged to φ38mm hoses after rigid PVCpellets were conveyed.

These are not standard values, but testvalues.

(300) 303.0±2.0 316.4 20.0

(250) 252.0±2.0 265.7

*NEW PRODUCT*

20

10・200.01 [0.1] -3.0 [-23] 310 3,389

-5.0 [-35] 260 2,872

2,338200 202.0±2.0 215.0 17.5 0.01 [0.1] -6.0 [-45] 210

0.01 [0.1]

150 1,350

187.0 17.5 0.02 [0.2] -10.0 [-78] 180 1,892

163.8 17.5 0.02 [0.2] -14.0 [-110]

0.02 [0.2] -19.0 [-150] 960

100 112.0 14.5 0.03 [0.3]

137.5 17.5127.0±1.5

14.5 0.03 [0.3] -32.0 [-250]

120

60 557

85.8 14.5 0.04 [0.4] -32.0 [-250] 75 600

72.6

59.9 12.0

0.04 [0.4] -65.0 [-500]

0.05 [0.5] -65.0 [-500]

12.0

0.06 [0.6] -65.0 [-500] 32 260

Std.Length

(m)

25 25.0±0.8 32.4 7.6 0.06 [0.6] -65.0 [-500] 25 200

WorkingPressure

(20℃)MPa or less/

[kgf/cm2 or less]

Allowable Reduced

Pressure(20℃)


BendingRadius

(mm or more)

Ref.Weight

(g/m)

Excels in antistatic effect because thesoft part is made by PVC containsantistatic substance.

NominalDia. (φ)

I.D.(mm)

Indoor piping of clean room wherestatic electricity is undesirable.

O.D.(mm)

Pitch(mm)

39.8 8.0

38 38.1±1.0 45.9 9.0

75

152.4±1.5

175.0±1.5

150

8590

101.6±1.5

89.0±1.5

125

(175)

98.6 695

870

0.06 [0.6] -65.0 [-500]

-21.0 [-160] 90

35 320

50 453

63.5

76.2

32 32.0±1.0

50 50.8

65

Tiflex Hose GL-ST typeFeatures

Transparent type of GL type.Transparent making it possible toconfirm inside contents.Light weighted, flexible, and lowairflow resistance as same as GLtype.That makes high transport capacity.

Dust collection of wood workingmachine and pneumatic conveying ofpowders.

Applications

+1.5- 1.0

+1.5- 1.0

+1.5- 1.0

I.D.

O.D

.


Pitch

Antistatic Soft PVC (Transparent)

GL-E type

E type, AbrasionResistant E type

Antistatic W type

WT type

GL-ST type

(In case that grounding wire is connected to conductive material)

Charged Voltage (V)

29

Hose (P type/Color: Dark Brown) Hose (P-2 type/Color: White) Structure (Cross-Section View)

Sizes and properties (P-□, P2-□)

・

・

・

・

・(Note) I.D. shall be measured as the distance between the helical reinforcement wires.

Bending Test

・・・・・・

※

[Usable temperature range] -20 to 80℃

I.D.(mm)

O.D.(mm)

41.5±0.8

5

37.5

53.5

67.0

76.5

92.0 96.0±1.0

106.0±1.0

308.0±1.5

253.5

302.0

208.0±1.0

259.5±1.0

102.0

127.5

202.0

NominalDia. (φ)

50

38

80.5±1.0

57.5±1.0

71.0±1.0

125

Light weight and freely bendablemaking piping work easy.

90

65

10050% lighter in weight than existingduct hoses. (Compared with TigersPolymer's other duct hoses)

Hose transportation cost is lessmaking it economical.

75

150

300

250

Nominal Dia.(φ)

155.0

For exhaust of paint and gas venting.For gas conveying (include hot air).

For spot cooling and heating.For air-conditioning.For indoor air conveying and exhaust.

50

65

75 100,000 timesno change

588 {60.0}

Bending Strength(Bent 180°, 25℃,

20 times/min)

Stretching Strength(25℃, 20 times/min)

Tensile Strength (25℃)N {kgf}

100,000 timesno change


392 {40.0}



0.002 [0.02] -5.0 [-35] 18019.3 1,270

490 {50.0}

1,350

200 19.3 0.003 [0.03] -6.0 [-45] 140 1,020

15.0 0.004 [0.04] -8.0 [-62]159.0±1.0 110 530

90 43515.0 0.005 [0.05] -11.0 [-85]131.5±1.0

70

14.0 0.007 [0.07] -17.0 [-130] 75 365

320

270

240

60

14.0 0.007 [0.07] -17.0 [-130]

0.009 [0.09] -17.0 [-130]

11.0 0.011 [0.09] -17.0 [-130] 50

Std.Length

(m)

-17.0 [-130] 30 140

-17.0 [-130]11.0

12.0

0.014 [0.14]

Pitch(mm)

WorkingPressure

(20℃)MPa or less/

[kgf/cm2 or less]

9.5 0.018 [0.18]

40 180

Tiflex Hose P, P-2 type

Ref.Weight

(g/m)

Allowable Reduced

Pressure(20℃)


BendingRadius

(mm or more)

Features

Since wire might be exposed from a hose end, hose should behandled carefully.

Excels in stretchability (rate ofshrinkage 1/3 ~ 1/4). Freelystretchable and excels inaccommodation property makingstorage convenient. Also, less spaceis needed for stocking.

Hose can be bent toward any directionfor which reason elbow cuffs are notnecessary.

Applications

However, please consult us because there are case of the stretching performance beingaffected when used continuously at over 60℃.

There are two types. One is Tiflex P type (darkbrown) and the other one is P-2 type (white).There is no difference in performance andspecification.

Can be shaped into various formsmaking it usable for interior designingas well.

24.0 0.002 [0.02] -4.0 [-30] 230


Pitch

Olefinic Plastic(Dark brown) (White)

Hard steel wire

I.D.

O.D

.

P type P-2 type

30


・

・

・

Sizes and properties (P[N]-□)・

・

・・・・・・・

(Note) I.D. shall be measured as the distance between the helical reinforcement wires.

Tiflex Hose Flame Retardant P type

1,540-4.0 [-30] 230

1,450259.5±1.0 0.002 [0.02]19.3 -5.0 [-35]250

140208.0±1.0 0.003 [0.03]

24.0308.0±1.5302.0 0.002 [0.02]300

71.0±1.0

80.5±1.0

19.3 -6.0 [-45]

96.0±1.0

106.0±1.0

131.5±1.0

12.0

67.0

76.5

253.5

155.0

202.0

550-8.0 [-62] 110

1,190

127.5For air-conditioning.For indoor air conveying and exhaust. 150

For gas conveying (include hot air).

90125 15.0

0.004 [0.04]15.0159.0±1.0

180For exhaust of paint and gas venting. 200

460-11.0 [-85]

-17.0 [-130] 75 410102.0 14.0For spot cooling and heating.-17.0 [-130] 70 340

100

14.092.0

Applications 65

Residential parts. 90

75

50 28011.0

310

-17.0 [-130]

-17.0 [-130] 60

50 53.5 40 220-17.0 [-130]11.057.5±1.0

BendingRadius

(mm or more)

NominalDia. (φ)

9.5 -17.0 [-130]38 37.5

Allowable ReducedPressure

(20℃)KPa or less/

[mmHg or less]

41.5±0.8

5

0.014 [0.14]

0.011 [0.09]

0.009 [0.09]

0.007 [0.07]

0.007 [0.07]

1800.018 [0.18]

0.005 [0.05]

30

Features

Ref.Weight

(g/m)

I.D.(mm)

O.D.(mm)

Flame retardant cuffs are alsoavailable.

Since wire might be exposed from a hose end,hose should be handled carefully.

Can be shaped into various formsmaking it usable for interior designingas well.

Std.Length

(m)

WorkingPressure

(20℃)MPa or less/

[kgf/cm2 or less]

Flame retardant type of Tiflex Hose Ptype.Endowed with flame retardancy whichis equivalent to UL94-HB.Excels in flexibility due to the samestructure as P type. (Shrinkage rate1/3 - 1/4)Light in weight and freely bendable. Itcan make ductwork easy, improveworkability and save labor.

Pitch(mm)

Pitch

Olefinic resin (Black)

Hard steel wire (Core)

I.D.

O.D

.

31

Hose

・

・

・

Sizes and properties (A-□)

・

・

・


Properties

Stretching Force :

Bending Stress :

Tensile Strength :

Both ends of a hose of 400mm length arefixed, and the load at time the hose bends ismeasured.

Endowed with special constructionmaking use possible by changing thebore diameter. ( Degree of borediameter change ±15%)Low in flow resistance and also smallin abrasion.

Suited for uses such as spot cooler.Note: Not suited for applicationsrequiring air-tightness.

Applications

300 39 [4.0]

250

44 [4.4]

37 [3.8]

150 41 [4.2]

200 44 [4.5] 16 [1.6]

175 42 [4.3] 14 [1.4]

3920 [400]

250 42 [4.3] 20 [2.0]

25 [2.5]

3230 [330]

2740 [280]

12 [1.2]

2840 [290]

2700 [275]

Tension StrengthN (kgf)

55 25 [2.5]

10 [1.0]

39 [4.0]

90 42 [4.3]

75

125

100

65

2650 [270]

10

1.50 755 3,450

5801.50

1.30

Diameter(φ)

6 [0.6]

182.0

150

1701.30

195

97.0

107.0

132.0

36 [3.7]

7.5

7.5

150

4

310.0

3,000

7.5

7.5175

157.0

Std.Length

(m)

7.5

7.5

7.5

MinimumBendingRadius

(mm or more)

Ref.Weight

(g/m)

1.30 155

680

550

※ A type is right-handed.

Freely stretchable and freely fixable.(Degree of shrinkage 30% ~ 50%)

Stretch Rate(Doubled)

Tiflex Hose A typeFeatures

Endowed with flame retardancy whichis equivalent to UL94-V0.

End cuffs are also available.62.055 55

O.D.(mm)

Pitch(mm)

NominalDia. (φ)

I.D.(mm)

7.5

175

90 90

82.0

125

100 100

125

75

65 65 72.0

75 750

1.30 250

1,0001.30 270

1.30

870

Bending StressN (kgf)

Tensile StrengthN (kgf)

415

1,250

1,500380

2,000

300

7.5

1.30 330

1.30

1.30 440

1860 [190]4 [0.4]

1570 [160]

200

300 10.5

200

250 260.0 10.5

A hose of 200mm length is pulled at a tensionrate of 200mm/min in temperature of 20℃,and the load at time of break is measured.

8 [0.8] 2450 [250]

1,690

2250 [230]

207.0

Hose is cantilever supported, and the tensionat time of pulling toward the longer direction ismeasured with a tension gauge.

7 [0.7]

3 [0.3]

2160 [220]

32

Heat ResistantDuct Hose

Tiflex Hose V series is a heat resistant flexiblehose with special structure made by originallydeveloped manufacturing method using metals

and other special materials in accordance with theapplication.

We have PAL type, AG type, FP type and SUS typeand they can be selected according to its use

conditions.

33


・

・

・ Sizes and properties (AP-□)

・

・・

.

Heat resistant flexible hose constructedof special laminated aluminum foil andolefinic resin.

Continuous usable temperature isabout 100 ℃ or lower.

For air conveying and exhaust requiringairtightness .

5・2076.2 23.0 0.04 -30 80 250

Bending Strength(Bent 180°, 25℃, 20 times/min)

100,000 timesNormal airtightness



50

75

38

100 100,000 timesNormal airtightness

Applications

Nominal Dia.(φ)

For gas conveying (include hot air). 101.6±1.5

15075 83.8

Excels in handling due to its lightweightand flexibility.

Excels in airtightness due to usingolefinic resin for internal and external ofthe special laminated aluminum.

38023.0 0.03 -20 100100 110.0

12050 56.450.8 15.0 0.05 -40 70

BendingRadius

(mm or more)

Ref.Weight

(g/m)

Std.Length

(m)

38 42.938.1±1.0 11.5 0.06 -50 60

Tiflex Hose AP type *NEW PRODUCT*

Features

NominalDia. (φ)

O.D.(mm)

I.D.(mm)

Pitch(mm)

WorkingPressure

(20℃)MPa or less/

[kgf/cm2 or less]

Allowable Reduced

Pressure(20℃)


Pitch

Olefinic Resin Laminated Aluminum

I.D.

O.D

.

+1.5- 1.0

+1.5- 1.0

34


・

・ Sizes and properties (PAL-□)

・

・

・

( ) are custom-made products. Nipple for connecting with steel pipe or two hoses connecting is also available.Please refer to P45.


・

・ Sizes and properties (AG-□)

・

・

・

・ ( ) are custom-made products. Nipple for connecting with steel pipe or two hoses connecting is also available.Please refer to P45.

※

Although using galvanized steel sheetas a reinforced material, it complieswith RoHS.

90

5

Ref.Weight

(g/m)

Std.Length

(m)

O.D.(mm)

Pitch(mm)

WorkingPressure

(20℃)MPa or less/

[kgf/cm2 or less]

Allowable Reduced

Pressure(20℃)


3600.029 [0.30] -17.0 [-130]

91.0±1.0

BendingRadius

(mm or more)

Applications

NominalDia. (φ)

I.D.(mm)

0.032 [0.33] -17.0 [-130]50 50.8±1.0 6065 65.5±1.0 69.5 20.0

54.3 20.070 465

75 75.5±1.0 79.5 20.0 0.025 [0.25] -15.0 [-115] 80 53595.0 24.0 0.020 [0.20] -13.0 [-100] 95 540

100 101.5±1.5 105.0 24.0 0.020 [0.20] -13.0 [-100] 105 590125 126.0±1.5 130.0 24.0 0.018 [0.18] -13.0 [-100] 125 740

-9.0 [-70] 150 890150 152.0±1.5 156.0 24.0

308.0

0.015 [0.15](175) 177.0±2.0 181.0

250 253.5±2.5 257.0

24.0 0.013 [0.13] 175200 202.0±2.0 206.0 24.0

0.008 [0.08] -3.0 [-23] 255

9800.010 [0.10] -6.0 [-45] 200 1,120

1,400

-8.0 [-62]

0.006 [0.06] -3.0 [-23] 280 1,5301,67024.0 0.005 [0.05] -3.0 [-23] 305

Light in weight, excels in flame andheat resistance.Continuous usable temperature isabout 180 ℃ or lower.

300

24.0(275) 278.0±2.5 282.0 24.0300 304.0±3.0

Pitch(mm)

WorkingPressure

(20℃)MPa or less/

[kgf/cm2 or less]

NominalDia. (φ)

Applications

200

Special aluminum and glass clothsheet which is used as a material isClass 1 Fire-Proof Material prescribedin JIS A1322.

150 152.0±1.5 157.0

I.D.(mm)

Allowable Reduced

Pressure(20℃)


BendingRadius

(mm or more)

Ref.Weight

(g/m)

Std.Length

(m)

O.D.(mm)

50 50.8±1.0 55.3

75 75.5±1.0 80.5

20.0

20.0

-17.0 [-130] 6065 65.5±1.0 70.5 20.0

0.025 [0.25] -15.0 [-115] 80

4000.029 [0.30] -17.0 [-130] 70 515

595

0.032 [0.33]

95 61090 91.0±1.0 96.0 24.0 0.020 [0.20] -13.0 [-100]670100 101.5±1.5 106.0 24.0 1050.020 [0.20] -13.0 [-100]835125 126.0±1.5 131.0 24.0 125

PAL type

Easy to store, keep, and transport dueto light weight and free contractibility.Continuous usable temperature isabout 130 ℃ or lower.

Note: Excels in flexibility but is not suited forrepeated flexing.

Heat resistant flexible hose constructedof special laminated aluminum foil andgalvanized steel sheet.

Features

Note: Not suited for applications requiring air-tightness.

AG type

FeaturesHeat resistant flexible hose constructedof special laminated aluminum foil,glass-cloth and galvanized steel sheet.


0.018 [0.18] -13.0 [-100]0.015 [0.15] -9.0 [-70]Note: Excels in flexibility but is not suited for

repeated flexing.

Although using galvanized steel sheetas a reinforced material, it complieswith RoHS.

150

202.0±2.0 207.0 24.0 0.010 [0.10] -6.0 [-45] 200

1,010(175) 177.0±2.0 182.0 24.0 0.013 [0.13] -8.0 [-62] 175 1,110

24.0

1,260255

(275) 278.0±2.5 283.5 24.0250 253.5±2.5 258.5 24.0

309.5 24.0 0.005 [0.05]

1,5800.006 [0.06] -3.0 [-23] 280 1,7300.008 [0.08] -3.0 [-23]

Since both ends of a hose are sharp metallic edges, hose should behandled carefully.

Suited for air conditioning, especiallyfor air conveying and exhaust in aceiling.

Suited for air conditioning, and airconveying and exhaust for hot airgeneration & circulation system.Glass cloth is used for a part of the material ofthe AG type. It is recommended to consult us inthe case of exports.

Tiflex Hose V series

-3.0 [-23] 305 1,890

5

304.0±3.0

Reinforced materialGalvanized steel sheet

Laminated aluminum foil 2P

Reinforced materialGalvanized steel sheet

Aluminum glass cloth sheet 2P

35


・

・Sizes and properties (FP-□)

・

・

・ ( ) are custom-made products. Nipple for connecting with steel pipe or two hoses connecting is also available.

※ Please refer to P45.


・

・Sizes and properties (SUS-□)

・

※

( ) are custom-made products. Nipple for connecting with steel pipe or two hoses connecting is also available.Please refer to P45.

Tiflex Hose V series Since both ends of a hose are sharp metallic edges, hose should behandled carefully.

6520.0

75

50 50.8±1.0 55.365.5±1.0 70.5

106.024.024.0

I.D.(mm)

O.D.(mm)

20.020.0

Pitch(mm)

75.5±1.0 80.5

0.002 [0.02]

258.5250 253.5±2.5

0.002 [0.02] -6.0 [-45] 305 1,700300 304.0±3.0 307.5 24.0(275) 278.0±2.5 281.5 1,550

2

24.0 0.003 [0.03] -6.0 [-45] 255 1,40024.0 0.003 [0.03] -6.0 [-45] 280

Continuous usable temperature is250℃ or lower. Therefore it can beused in higher heat range than PAL andAG type.Special coated glass cloth sheet whichis used as a material is Class 1 Fire-Proof Material prescribed in JIS A1322.

(175) 177.0±2.0

126.0±1.5150

Note: Not suited for repeated flexing, but isbetter than PAL type and AG type.

100 101.5±1.5

NominalDia. (φ)

280 1,780-3.0 [-23] 305 1,910

Ref.Weight

(g/m)

Std.Length

(m)

370

645795

1,610

585

70 480

105

1,300

125

1,140

-17.0 [-130]-15.0 [-115]-13.0 [-100]

300-3.0 [-23]

24.0

-13.0 [-100]-13.0 [-100]

90 91.0±1.0

Features

Note: Excels in heat resistance and can be bentbut is not suited for repeated flexing.

24.0

24.024.0

200 202.0±2.0 207.0

ApplicationsSuit for duct of hot air generation &circulation system.

SUS type

Glass cloth is used for a part of the material ofthe FP type. It is recommended to consult us inthe case of exports.

5Note: Not suited for applications requiring air-tightness.

152.0±1.5125

182.0

Ref.Weight

(g/m)

309.5

555950.010 [0.10]

0.010 [0.10]

157.0 24.0

96.0

131.0


Applications

0.003 [0.03](275) 278.0±2.5 283.5 24.0 0.003 [0.03]

24.0

304.0±3.0

Allowable Reduced

Pressure(20℃)


-3.0 [-23]

BendingRadius

(mm or more)

175

-17.0 [-130] 60

80

-6.0 [-45] 200255

WorkingPressure

(20℃)MPa or less/

[kgf/cm2 or less]

0.018 [0.18]0.015 [0.15]0.013 [0.13]

Std.Length

(m)

Continuous usable temperature is400℃ or lower.

Constructed entirely of stainless steel(SUS 304).

O.D.(mm)

Pitch(mm)

WorkingPressure

(20℃)MPa or less/

[kgf/cm2 or less]

Allowable Reduced

Pressure(20℃)


NominalDia. (φ)

I.D.(mm)

BendingRadius

(mm or more)

0.018 [0.18] -21.0 [-160] 6050 50.8±1.0 53.8 35065 65.5±1.0 69.0 20.0 0.015 [0.15] -21.0 [-160] 70 450

20.0

250 253.5±2.5 257.0

Since both ends of V series hose are sharpmetallic edges, hose should be handledcarefully.

200 202.0±2.0 205.5

75 75.5±1.0 79.0

Suit for fixed piping of equipments forpollution control, devices for physics &chemistry, and burning equipment.

100 101.5±1.5 105.0

150 152.0±1.5

9020.0 0.013 [0.13] -21.0 [-160] 80

91.0±1.0 94.5 24.00.010 [0.10]24.0 -15.0 [-115] 105

5200.010 [0.10] -17.0 [-129] 95 550

610125 126.0±1.5 129.5 24.0 0.010 [0.10] -15.0 [-115] 125 760

155.5 24.0 0.008 [0.08] -13.0 [-100] 150 910(175) 177.0±2.0 180.5 24.0 0.006 [0.06] -10.0 [-78] 175 1,060

24.0 0.005 [0.05] -9.0 [-70] 200 1,210

0.010 [0.10]0.008 [0.08]0.006 [0.06]0.005 [0.05]

-9.0 [-70] 150 990-8.0 [-62]

FP type

FeaturesConstructed of special coated glasscloth and stainless-steel copper plate(SUS304).Easy to store, keep, and transport dueto light weight and free contractibility.

Reinforced materialStainless steel sheet

Special coated glass cloth

Reinforced materialStainless steel sheet

Stainless foil

36


・

Dimension and property (SRDH[TS]/[GS]-□)・

・

・

・These above mentioned values are not guaranteed values, but standard values.These standards may change without prior notice.

・ ※ The other types such as cleaner, vacuum, suction type are available.

Since wire might be exposed from a hose end, hose should behandled carefully.Silicone Rubber Duct Hose

Applications

Light weighted and flexible duct hosewhich is constructed of heat resistantfabric of polyester cloth (Tetron) coatedwith silicone rubber and reinforcingwire.

ApplicationsFor conveying and exhaust of hot air,exhaust gas and etc.

Light weighted and flexible duct hosewhich is constructed of heat resistantglass cloth coated with silicone rubberand reinforcing wire.

Features

(208)

165 165.0 (170)

200 203.0(183)178.0175

140 139.5 (144)150 150.0 (155)

(104)125 126.5 (131)100 100.0

(79)90 90.0 (94)75 75.0

25 25.0 (29)

TS type

Features

Excels in heat and cold resistance, andcan be used at -50 ~ 150℃. Nominal Dia.

(φ)I.D.

(mm)O.D.(mm)

GS type

For conveying and exhaust of hot air,exhaust gas and etc.

(36)32

60 60.5 (65)

Standard length is 2m. For a diameter or length other than those mentioned above, pleaseconsult us. Outer diameter is not guaranteed value, but standard value.

65 65.0 (69)

50 50.0 (54)38 38.0 (42)

32.0

Excels in heat and cold resistance, andcan be used at -50 ~ 200℃.

SR coated glass cloth, orSR coated Tetron cloth

No cufftype

Wire

37

Non-PVC HoseEco-friendly, flexible, and lightweight

38


・

・

Sizes and properties (ELFF-□)・

Applications・・

・

Features Hose Structure (Cross-Section View)・

・

Sizes and properties (ELWT-□)・

・

Applications・

・ Conveying of food. (except fatand oil)

Eco-friendly hose due to nonuseof chlorine and plasticizer.(Can be incinerated)

Ti-Eco Light Hose WT type

120.0 16.5100 101.6±1.5

38.1±0.5

50 0.10 [1.0] 565

70 1500.10 [1.0] 735

62.0 11.0

0.10 [1.0]

120

70 200

9.538

NominalDia. (φ)

I.D.(mm)

For general suction andFor suction and draining ofagriculture, civil engineeringwork and etc.

Spiral shape of outside, goodflexibility and lightweight make iteasy to be handled. (About 30%lighter in weight than our currentPVC products.)Transparent making it possibleto confirm the contents.

101.6±1.5

76.2±1.0

50.8±1.0

47.5

50

75

100

Conveying of food. (except fatand oil)

116.0

Complies with Standard ofApparatus, Containers andPackaging based on JapaneseMinistry of Health, Labour andWelfare Notification No.201,Food Sanitation Act No.201.(except fat and oil)

Features

NominalDia. (φ)

Lightweight makes it easy to behandled. (About 30% lighter inweight than our current PVCproducts.)

38

WorkingPressure

(20℃)MPa or less/

[kgf/cm2 or less]

45.7

20

0.10 [1.0] 70 300 1630

70

100

1500

560

900

0.10 [1.0] 60

1050

86.4 0.15 [1.5]

0.20 [2.0]7.0

8.059.2

9.0

14.0

0.20 [2.0]

75 76.2±1.0 91.5

20

95

360

62575

115565

Std.Length

(m)

DeformationTemp.

(at -0.1MPa)（℃）※

Eco-friendly hose due to nonuseof chlorine and plasticizer.(Can be incinerated)

I.D.(mm)

O.D.(mm)

Pitch(mm)

Complies with Standard ofApparatus, Containers andPackaging based on JapaneseMinistry of Health, Labour andWelfare Notification No.201,Food Sanitation Act. (except fatand oil)

43545038.1±1.0

BendingRadius

(mm or more)

Ref.Weight

(g/m)

Ti-Eco Light Hose FF type

63.5±1.0 76.5 13.5

70

2100

Ref.Weight

(g/m)

0.10 [1.0]

For general suction anddraining. (particularly suitablefor suction)

BendingRadius

(mm or more)

Std.Length

(m)

O.D.(mm)

Pitch(mm)

WorkingPressure

(20℃)MPa or less/

[kgf/cm2 or less]

DeformationTemp.

(at -0.1MPa)（℃）※

15.0

50.8±1.0

65

Pitch

Elastomer

Olefinic Resin

I.D.

O.D

.

Pitch

Elastomer

Olefinic Resin

I.D.

O.D

.

39


・

・

・ Sizes and properties (ELW [D] -□)

・

Applications・・・

Features Hose Structure (Cross-Section View)・

・Sizes and properties (ELWS-□)

・

・

・

Applications・・

・

500 1900350 130075

0.50 [5.1] 90 200 75050

101.6±1.5 120.2 16.59076.2±1.0 15.1 0.50 [5.1]

0.50 [5.1] 90

50.8±1.0 68.2 10.09.0 0.50 [5.1]

101.6±1.5

4801500.50 [5.1] 90 100 320

1660200300

BendingRadius

(mm or more)

※ Ti-Eco Light WS type is right-handed.

0.10 [1.0]16.5119.515.0

700.10 [1.0]

70 18570 100 360

Conveying of powders and grains.75 76.2±1.0

70

91.065 63.5±1.0 76.560

Conveying of plastic pellets.

O.D.(mm)

Pitch(mm)

50

25.0±0.5 33.0

48.638.1±0.5 48.0

50.8±1.0 62.0

150150

0.10 [1.0]70 120

7013.5 0.10 [1.0] 70

70

13.5 0.10 [1.0]

7.6

11.0

9.5 0.10 [1.0]11.0 0.10 [1.0]

Eco-friendly hose due to nonuse ofchlorine and plasticizer. (Can beincinerated)Spiral shape of outside, good flexibilityand lightweight make it easy to behandled. (About 30% lighter in weightthan our current PVC products.)

60.5±1.0

49.0±1.0

I.D.(mm)

38

Complies with Standard of Apparatus,Containers and Packaging based onJapanese Ministry of Health, Labourand Welfare Notification No.201, FoodSanitation Act. (except fat and oil)

1100

NominalDia. (φ)

25

73.0

54070 120 560

60.0

0.10 [1.0]

For general draining. (delivery/suction)

NominalDia. (φ)

I.D.(mm)

O.D.(mm)

38 38.1±0.5 51.1

Conveying of food. (except fat and oil)

91.4

Excels in pressure resistance due tocontaining reinforcement fiber.

Std.Length

(m)

Ti-Eco Light Hose Antistatic W type

WorkingPressure

(20℃)MPa or less/

[kgf/cm2 or less]

DeformationTemp.

(at -0.1MPa)（℃）※

BendingRadius

(mm or more)

Ref.Weight

(g/m)

FeaturesExcels in static prevention effects byuse of antistatic build-up material andconductive fiber.

Conveying of food. (except fat and oil)

Eco-friendly hose due to nonuse ofchlorine and plasticizer. (Can beincinerated)

100

Conveying cleaning water in an atomicpower plant.

Std.Length

(m)

Pitch(mm)

Good flexibility and lightweight make iteasy to be handled.

Excels in abrasion resistance by use ofspecial elastomer at hose soft part.Abrasion resistance: About 5 timesmore (Compared to our PVC Tiflexhose WS type. By test result performedat normal temperature)

Ti-Eco Light Hose WS type

WorkingPressure

(20℃)MPa or less/

[kgf/cm2 or less]

DeformationTemp.

(at -0.1MPa)（℃）※

Ref.Weight

(g/m)

9025 25.0±0.5 36.8 8.0

100

730760

20

20


Pitch

ElastomerOlefinic Resin

I.D.

O.D

.

ConductiveTextile

Pitch

Special ElastomerOlefinic Resin

I.D.

O.D

.

Reinforced Cord

40


・

・ Sizes and properties (GL-V-□)

・

Applications・

・


・・

・

Sizes and properties (ELGL-□)・

Applications・

・

・ Duct for air conditioning.

※ is custom-made product.

● Exclusive cuffs are also available (Other than φ175 and φ200)

125

90Duct for general air induction andexhaust.

65

100

200

67520.0 0.02 [0.2] -12.0 [-90] 150127.0±1.5 138.0

220 1230

45.650 180-40.0 [-300]8.0 0.06 [0.6]39.5

9.060 22550 195

32570390475-15.0 [-113] 100

14.5 0.04 [0.4]

101.6±1.5 110.8 14.589.0±1.5 98.2

12.075

0.04 [0.4]

0.06 [0.6] -40.0 [-300]

0.03 [0.3]0.03 [0.3]

0.05 [0.5]

-20.0 [-150]

-15.0 [-113]

-40.0 [-300]-20.0 [-150]

50

76.2±1.0

3238.1±1.032.0±1.0

63.5±1.0

38

85.2

23.0

71.812.0

14.5

20.0

220.0177.0±1.5 193.0

190152.4±1.5 0.02 [0.2]23.0

165.5 -10.0 [-75]

20

0.01 [0.1] -6.0 [-45] 250 13700.02 [0.2] -8.0 [-60]

940

540110

Std.Length

(m)

WorkingPressure

(20℃)MPa or less/

[kgf/cm2 or less]

NominalDia. (φ)

I.D.(mm)

O.D.(mm)

Pitch(mm)

BendingRadius

(mm)

Ref.Weight

(g/m)

NominalDia. (φ)

Ti-Eco Light Hose GL type

Allowable Reduced

Pressure(20℃)


Features

※175203.7±2.0

Duct for exhaust ventilation for generalindustrial machinery.

150

90

50.8±1.0 58.5

I.D.(mm)

O.D.(mm)

Features

Easy cutting makes easy adjustment ofhose length.Eco-friendly hose due to nonuse ofchlorine and plasticizer. (Can beincinerated)

Easy to transport and piping becausethe hose is ultralight and excels inflexibility and stretchability.(Mass: About 1/2 by φ300 comparedto our PVC GL type, Stretch rate: 1/2or low)

Resistant to repeated bending.Lightweight and excels in flexibility.(About 40% lighter in weight than ourcurrent PVC products.)Eco-friendly hose due to nonuse ofchlorine and plasticizer.

Other general flue duct.

750

Pitch(mm)

WorkingPressure

(20℃)KPa or less

Allowable Reduced

Pressure(20℃)

KPa or less

BendingRadius

(mm)

250

Ref.Weight

(g/m)

Std.Length

(m)

150 151.5±2.0 165 30 20 -8 20010 -7 250 1250200 203.2±3.0 218 40

6 -6 350254.0±4.0 271 40 8

300 304.8±4.0 324 40450 2800

-7 300 2000

340050

2600Duct for dust collection, exhaust airand smoke exhaust system. 350 355.6±4.0 377 50 5 -5

Ti-Eco Light Hose GL-V type *NEW PRODUCT* Custom-Made Product

540050 3 -3 600500 508.0±5.0 534


20

10400 406.4±5.0 429 4 -3 500

Pitch


I.D.

O.D

.

Pitch


I.D.

O.D

.

Special FilmOlefinic Resin

41

Hoses developed for special applications.

Other Hoses

42


・

・

Sizes and properties (NH1-□)・

※

・

・

※

※ ※ Please consult us for lengths other than those mentioned above.

Hose

・・

・・

Structure (Cross-Section View) (KCH-□)

Sizes and properties

270

450

Excels in stretchability, bending, andalso heat resistance.Able to improve the working efficiency,reduce the transportation costsignificantly and save the inventoryspace because it excels in durabilityand can be contacted to 1/4 in length.Light in weight and excels in noisereduction and condensation preventionperformance by use of special flameretardant fabric as liner material.

90 DegreesMinimum Bending Radius

(mm)

Nominal Dia.(φ)

225

250

Product Length(m)

Tiflex Hose NH-1 typeFeatures

Air-conditioning branch pipe of large-scale architectural structure.

300

500

550

230

O.D.(mm)

Industrial Cleaner Hose

Various types of air-conditioningbranch pipe.

Qualified product as MLIT noncombustiblematerial (Ministry of Land, Infrastructure,Transport and Tourism). No. NM-0601

100

125

150

175

200Applications

Air-conditioning duct hose which is a qualifiedproduct of MLIT noncombustible material.

Cuff I.D.(mm)

Ref.Weight(g/m)

Std.Length

(m)

Easy to bend and flexible.Excels in durability compared withrubber hose.Excels in weather resistance.Endowed with antistatic effect by useof grounding wire.

NominalDia.(φ)

I.D.(mm)

1, 2, 3,4, 5, 6,7, 8, 9,

10

38 37.8±0.8 46

190

37.8 650 2.5 ・ 5

600

920

1,050

Features

Please refer to P56 for pressure loss data.

650

275

300

350

400

Glass woolPolypropylene tube

I.D.

O.D

.

Specialnonwoven fabric

Galvanizedsteel plate

I.D.

O.D

.

Soft PVCHard steel wire(core)

Soft PVC

Grounding wire

Cuf

f I.D

.

Integral molding cuff

43


・

・

・

Sizes and properties (HINET-□)

・

・

・・

・・

Temperature dependence of breaking pressure

380 1,300 40

815

19.0 × 26.0 300

25.0 × 33.0

1 75

440

15.0 × 22.0 245

0.8 135

0.8 95

12 12.0 × 18.0 180

15

8 8.0 × 13.5 115

38 38.0 × 48.0

50 50.0 × 62.0

0.5 255

0.5

50

9 9.0 × 15.0 145

10 10.0 × 16.0 1551 70

1 60

19

0.6 210 64032 32.0 × 41.0

0.6 16525

1 55

Std.Length

(m)

65

Water supplying and draining forequipments.

85

100

40

No elongation observed underpressure due to warp reinforcement .Excels in cold resistance, heatresistance, and chemical resistance.

1

4 4.0 × 9.0

6

FeaturesExcellent transparency making itpossible to confirm the contents.

1

NominalDia.(φ)

6.0 × 11.0

35

Hinet Hose

Ref.Weight(g/m)

I.D. x O.D.(mm)

WorkingPressure

(20℃)MPa or less/

[kgf/cm2 or less]

BendingRadius

(mm or more)

Applications

For civil engineering and construction.(Please consult us on hoses forspecial usage such as shower hosesand etc.)

For piping and drain hose ofpneumatic/air-conditioning equipment.For washing of ship, vehicle and etc.For conveying of powders, grains,chemicals and etc.For sprayer

Flexible PVC (Transparent)

Strong Tetron Yarn

I.D.

O.D

.

Water Temperature (℃)

Bre

akin

g P

ress

ure

(MP

a)

44

Put a hose directly in fitted hose or use cuffs. In case that outer diameter of a fitted hose is larger than inner diameter of a hose, a cuff mustbe used because diameter of the hose cannot be expanded.Use spiral wire band when not use a cuff.Wire band and ABA band is also applicable when use a cuff.

Cuff Sizes

Structure (Cross-Section View)

Color: Gray

φ16～φ32 Sizes

φ38～φ300

Structure (φ38～φ300)

Cuff for Tiflex Hose N type

Fitting Method with Duct Hoses

100

125

50

5175 175

-

φC(mm)

152 83 86 3.5 173.3

23

B(mm)

5

2

T(mm)

150

168 78 88

49

48

25

40

40

45

28

50

5 268

23

A(mm)

100 106

250 64 64

100 48 52200 200

250 128

3.5 142

150 150 160 81 85 4 169

125 125 105 45

89 45

25

65 65 81

25 25

38 38

19 19.5

35

L(mm)

42

37

3

340

40 3 53

90

65

38

3.5

4

93.3

150

65

40 3

142.3

120

79.5

67.7

2 37.5

2

105.53

45

B(mm)

Cuff for Tiflex Hose GL type, GL-E type, and GL-ST type

T(mm)

φC(mm)

A(mm)

37.5

32

73

32 37

NominalDia.(φ)

25

80

42 2

I.D.(mm)

90

38

L(mm)

75

125

25

29

55 27 30

71

40

87 44

15.8

I.D.(mm)

65

75

50

132

37

32 32 49 27

45 24 21 2

50 50 75 37

77.5

75 36 3 48

3

43 45 3

75 75 80 42

316300 300 128 64 64 5

74 38 40

102.7

46

55

66

53

63

3

3 116.7

90 90

100 100 96 48

Structure (φ16～φ32)

198

200 200 101 49 53 222

16

NominalDia.(φ)

Synthetic Rubber(EPDM: Black)

Material

SoftPolyvinylChloride

Synthetic Rubber(EPDM)

5 214

Material


Synthetic Rubber(EPDM: Gray)

89.5

3 64.5

2.5 43

45

Cuff Sizes


※ Color: P type (dark brown), P-2 type (white), Flame Retardant P type (black)

End Cuff Sizes


※ Color: Black

Cuff for Tiflex Hose P type, P-2 type & Flame Retardant P type

3100

62

2.4200 199 204 23

2.4

150 144 159 23

175 169 184 23

40 3

3.5

75

139

200

90 45

95 45

52 5 214

SyntheticRubber

(P type, P-2type:

EPDM)(Flame

Retardant Ptype: CR)

23

100 50 113

3

5

163

268

125 119 134

50

90 86 99

150

100

100

48

61

125

2.4

20

94 109 20

200

55

34070 35 50

75 45 3 87

2.0

65 18 2.0

55 51 64 18

74

I.D.(mm)

B(mm)

T(mm)

NominalDia.(φ)

L(mm)

A(mm)

65

Material

38 70 35 38 40 3 48

φC(mm)

50

90 85 43

75 80 40

65 70 35

90 48 3 99

C(mm)

300

100

End Cuff for Tiflex Hose A type

128 64 250 64250

64

D(mm)

Material

2.0

2.0

2.4

2.4

NominalDia.(φ)

160 64 300

φA(mm)

φB(mm)

2.5

2.5

317

150

125 49

5

250 247 260 25


300 297 310 25

75 71 84 18

FlameRetardant

P type

P-2 typeP type

46

Structure (For φ100～φ300)

Sizes

Sizes

Nipple

Structure

Different Type Pipe Joint

Nipple

Connector for Heat Resistant Hose

HoseDiameter

(φ)

250

300

For φ100～φ300

150

100

200

275 273

250 248

252.5 272

170

130

170

130

170

75

130

198

200

125

175 173

125 123

150 148

98

73

318.5

Galvanized Steel Sheetand

Stainless Sheet SUS304

170

170

SUS

L(mm)

Material

300

50 49.4 94

298 170

100

275

HoseDiameter

(φ)

φD1(mm)

Also available for general duct hose

267.4

303 323 275

Galvanized SteelSheetand

Stainless SheetSUS304

216.3

151

235 114.3

170

100

139.8

119

275 165.2

Different TypePipe

Std. O.D.(mm)

MaterialφD1(mm)

φD2(mm)

L(mm)

125 144 235

201 220 275

Also available for general Tiflex duct hose

47

R-Power Band Tightening R-Power Band Tightening & Welding

Inner Coupler Expansion type Outer Socket Caulking type

Example of Metal Fixture Fitting

(1)

(2)

(3)

(4)

(5)

(6)

Free of concern of fall-off of fixture by mechanical caulking of coupler andsocket. Also, the outer surface of the fixture is free of projections makinghandling safe and easy.

Fitting at work site is possible by cuttinglong lengths.

Type with steel rods for welding toprevent from sudden fall-off of fixturecaused by hammering pressure

Fitting Method of Metal Fixture

Please specify the metal fixture such as< Joint Sleeves with JIS 5kgf / 10kgfFlange, Couplers with S / M shape collarfor Victaulic Couplings, or etc.>

M-1 metal fixture + Punch band 2 piecestightening

Coupler with S shape collar + R-power band2 pieces tightening

Coupler with S shape collar for inner couplerexpansion + spring socket

Coupler with S shape collar for outer socketcaulking + socket

Coupler with S shape collar for inner couplerexpansion + socket

Coupler with S shape collar + R-power band2 pieces tightening + steel rods welding

Tigers Polymer Corporation shallnot be liable for any accidentscaused by fall-off and etc. of thefixture in the case of fixturesfitted by any party other than us.Thorough care should beobserved when fitting at worksites.

48

Couplers withG Shape Collar

for Victaulic

Couplers withS Shape Collar

for Victaulic

Spiral Wire Double Bolt Clamps(R-Power Band)

For right-handed Hose

Spiral Wire Double BoltClamps (L-Power Band)

For left-handed hose

Quick-ActingCouplers with Locking Lever / Adapters

Quick-ActingCouplers / Adapters

(633CT/633ET)Threaded Hose Nipples

(M-1 Metal Fixture)

Metal Plate Clamps(Expamet Band)

Metal Plate Clamps(Punch Band)

Metal Plate Bolt Clamps(ABA Band)

Spiral Wire Bolt Clamps(LS Band)

Wire Bolt Clamps(Wire Band)

Joint Sleeves with Flange

49

Standard Combination Table of Fixture and Clamp

◎： Usable with working pressure for each applicable hose

○： Usable with 70 percent or less of working pressure for each applicable hose

Note) This table specifies the combinations in case of using our standard couplers with S shape collar or joint sleeves with JIS flange.

In case that the other commercially available metal fixtures are used, please consult us in advance because there might be a case that a hosecan not be used with its working pressure or the metal fixture can not be fitted to a hose.

Punch Band(with reinforcing coil)

Expamet Band

Punch BandExpamet Band

SY Band

LS Band

ABA Band

Punch BandExpamet Band

Punch Band(with reinforcing coil)

Expamet BandRib

bed

Sur

face

Jagg

ed S

urfa

ce

Outer Socket Caulking

R-Power Band

L-Power Band

Surfa

ce S

tate

of S

leev

e Pa

rt

Fixture and Clamp(Tightening Method)

Inner Coupler Expansion(With Spring Socket)

Inner Coupler Expansion

WR

IS

New

WR

FC WS

FF F-3

WT

WA

Ant

ista

tic W

E, A

bras

ion

Res

ista

nt E

Food

Gra

de,

Oil

Res

ista

nt F

Applicable Hose Size

◎ ◎

φ100 or moreFor WS, φ250 or more

Inner duct expansion is notavailable for WRφ125

◎ ◎ φ75 or less

◎ ◎ ◎ ◎ ◎ ◎ ◎ ◎φ38～φ200

φ100 or more for F-3

○ ○ ◎ ◎ for right-handed sizes of WT

◎ ◎ for left-handed sizes of WT

○ ○ ○φ100 or less

for right-handed sizes of WT

○ ○φ100 or less

for left-handed sizes of WT

○ ○ ○ ○ φ50 or less

◎ ◎ ◎ ◎ φ75 or less

○ ◎ ◎ φ75 or less

φ100 or more

◎

◎ ◎

φ100 or more

◎

50

Sizes


Sizes


Sizes


Structure (Cross-Section View) Sizes Structure (Cross-Section View) Sizes

D2 LB

5kgf Flange 10kgf Flange

Metal Fixture for Hose Fitting (Dimension Table)Joint Sleeves with JIS Flange

Couplers with S shape collar forVictaulic Couplings

D1ANominalSize

38 ― 31

―65

12 16 37.6

56 63.8

130

50 ― 14 16 42 50.3 135

145

75 ― 14 18 68 76.5 160

14 18

100 158 16 18 97.1 102.0 220

125 169 16 20 121.8 128.0 238

261

200 189 20 22 195.9 204.0 275

150 190

250 237

147.2 153.018 22

251.8 256.022 24

D2 L

323

300 280 22 26 301.7 306.5 366

37.6 130

NominalSize

A

38 ― 15 31

B D1

50 ― 15 42

76.5 160

65 ― 15 56

50.3 135

63.8 145

102.0 220

75 ―

100 158 16 97.1

15 68

125 169 16 121.8

204.0 275

150 190 16 147.2

128.0 238

153.0 261

256.0 323

200 189

250 237 19 251.8

19 195.9

300 280 19 301.7 306.5 366

LC E D1 D2 D3T A B

Threaded Hose Nipples(M-1 Metal Fixture) Nominal

Size

6 R1/4 13 8 36 8.5 4 6.0 7.5 57

9 R3/8 15 9 39 9.0 6 9.2 10.5 63

12 R1/2 18 10 44 10.0 9 12.5 14.0 72

19 R3/4 20 12 53 12.0 16 19.0 20.5 85

25 R1 22 12 58 13.0 21 25.0 27.0 92

32 R1-1/4 25 15 65 14.5 27 32.0 34.0 105

38 R1-1/2 26 15 76 14.0 31 38.0 40.3 117

50 R2 30 16 79 14.5 44 49.5 52.0 125

65 R2-1/2 33 18 99 15.0 56 62.5 65.0 150

75 R3 38 18 114 17.0 69 74.5 77.5 170

100 R4 45 22 153 21.5 88 97.0 102.0 220

h2

130 90

Nominal Size d h h1

90

MN50×38 38.1 176

50×50 52 179 130

110

89×75 76.3 215 175 126

70×65 63.5 192 150

143

133×125 129 264 212 143

108×100 101.6 240 212

143

216×200 205 365 280 170

159×150 154 292 212

VN50×38 38.1 155 75

50×50 52 155 75

70×65 63.5 165 100

89×75 76.3 185 126

108×100 101.6 206 157

133×125 129 227 177

159×150 154 255 210

216×200 205 306 310

Nominal Size d h a

25 ― 10 14

Quick-ActingCouplers with Locking Lever / Adapters

20 27 90

25 ― 15 20 27 90

Less than 75

Less than 75

MN Hose ConnectType Sleeve

(Female)

VN Hose ConnectType Sleeve

(Male)

51

Sizes


Sizes

ApplicableHose Size (φ)

R-Power Band(for right-handed hose) Item No. Range of Use

(mm)

RP-75

RP-200250

RP-90

RP-150

RP-100RP-115RP-125

WS, WR 300RP-250

50 565

90

5060 Antistatic W

LP-38 50 566-51LP-50

75

75Antistatic W

980

50

LP-250

78-63

LP-150

123-103

50 550 5

100-85WT, WA, WS, WR 100

132-112

760

9

760 760

143-123

W(mm)

φd(mm) Applicable Hose

90-75

WR

WT, WA, WS, WR50 560

RP-38 50-4048-5878-63RP-65

RP-50M

70 9

38WT, WA, WS, WR 50WT, WA, WS, WR 65

75WT, WA 90

150200

115WT, WA, WS, WR 125

9WT, WA, WS, WRWT, WA, WS, WR

RP-300 340-300 90

70173-148229-199

9099 WS, WR

L-Power Band(for left-handed hose) Item No. Range of Use

(mm)W

(mm)φd

(mm) Applicable Hose

285-245

ApplicableHose Size (φ)

50-40 38

Antistatic W 100100-85 760123-103 60 7

LP-115 132-112 60 9LP-100

90-75LP-90

LP-65LP-75

LP-125 143-123 70 9WT 115

125

LP-200 229-199 80 9 200173-148 70 9 150

340-300 90 9285-245 90 9

Spiral Wire Double Bolt Clamps

250LP-300 300

Range of use

52

Sizes


O/R: Oil Resistant

Sizes


※ Use SRB-220 band for Abrasion Resistant GL type (φ200）.

200

318-298 GL, N

SY Band(for right-handed hose)

LS-290 290-270

131-111 WT

266-246

LS-318

LS-266

LS-157

LS-121

300

GL, N

LS-131

LS-240 240-220

LS-182 182-162 GL, NLS-210 210-190 GL, N, O/R GL

157-137 GL, N, GL-2, O/R GL, GL-E

LS-8890

LS-73 73-63LS-81

75Antistatic W

Antistatic W 65

62-52 Antistatic WWT

88-68 Antistatic W81-71 GL, N, GL-2, O/R GL, GL-E 75

50

SY-101 101-81 WT

SY-71 Abrasion Resistant GLSY-73

71-61

Abrasion Resistant GLWT, WA, WS

73-63

LS-62

SY-110

SY-81 81-71SY-88 88-68

SY-57 57-47

Range of Use(mm)

110-90

WT, WA, WS 65

62-52SY-62 WS, WAWT, Abrasion Resistant GL

SY-42SY-46

4538

48.6 GL, N, GL-2, O/R GL, GL-E 50

32

GL

GL, N, GL-2, O/R GL, GL-E

WS, Abrasion Resistant GL (φ38）

Item NameApplicable Hose

115 GL, N, GL-2, O/R GL, GL-E

100

GL, N150

Size

46-36 WT, WA, WS

WT42-3237-30

3232

38

100

165

125

Item No.

SY-37

LS-101 101-81LS-110 110-90LS-117 117-97

121-101

250

Antistatic WGL 115

175

LS-57 57-47 Antistatic W, N

60.5LS-71 71-61 Antistatic W 60

LS-46 46-36 Antistatic W 3845 WT, Antistatic W

GL, N, GL-2, O/R GL, GL-E 65

Spiral Wire Bolt ClampsLS Band(for left-handed hose)

(for hose without cuff)

Item Name Size Item NameApplicable Hose

SizeSize

Range ofUse(mm)

LS-42 42-3237-30

Item Name

Antistatic W 32 GL, N, GL-2, O/R GL, GL-E

GL, N

Item No.

LS-37

5050

907575

100100

65

SY-117 117-97 WT, WA, WSSY-121 121-101

Abrasion Resistant GL

150SY-131 131-111 Abrasion Resistant GL 125

Abrasion Resistant GLSY-182 182-162

SY-290 290-270

SY-240 240-220SY-266 266-246

SY-318 318-298

SY-210 210-190

SY-157 157-137

Range of use

Range of use

53

Sizes


O/R: Oil Resistant

Sizes

(For hose with cuff)


O/R: Oil Resistant

Note: The sizes of applicable hose and cuffare indicated as a rough guide in case thatnipple of which OD is nearly equal to ID ofthe hose and cuff is inserted.In case of using a nipple of which OD islarger than ID of the hose and cuff, thisclamp might be unable to use. Pleaseconsult us in such case.

170

145

200 200-180

170-160180 180-170

160 160-150 150150 150-140

145-135140 140-130

135-125 125130-120125-115120-110115-105110-100 100105-95100-92 9095-8890-8285-7880-7575-70 6570-6568-6364-59 E, Food Grade F,

O/R F 5060-55 FF 50

F-3 5058-53

E 48.68-6

54-495456 56-51 50

6 6-4

SizeCuff Size of

Applicable Duct Name Size

300

Item Name Size

Applicable Hose

52

NominalSize(mm)Size

300 V type

25 12525 120

19 105

115

34 34-31 Food Grade F,O/R F

36 36-32 13525 130

32 32-2930 30-27 25 F-3

FF

28 28-2526 26-23 110

10025 25-2224 24-21 19

FF

22 22-19

8520 20-17 16

9590

8019 19-1718 18-1616 16-1415 15-13

75706864

14 14-1213 13-11

9-7

12 12-10

8

6010 10-8

589

Wire Band

7 7-5

NominalSize(mm)

Range of Use(mm) Item Name

Cuff Size ofApplicable

Duct

Applicable Hose

277-307 277-308251-282 251-283

200-231 200-232 200

V type226-256 226-257 250V type

V type 175150-180 150-181175-205 175-206

150130-165 130-166 150104-139 125

Cuff Size ofApplicable

Duct

V type 125

V type 200

250

87-112 87-113 100

E

V type 100

Range of Use(mm)

V type104-138

90

45

V type 90

275

58-76V type 75

65 V type 65

NameApplicable Hose

32

68-85 68-86 75

38 38-35 32 FF, F-3

77-95 77-96

42 42-38

48.55058-7550-65 50-66

40 40-36 E, Food Grade F,O/R F

44-56 44-57 50V, FF, F-3, E, Food Grade F,

O/R F

E, Food Grade F, O/R F

38-50 38-51

44 44-40 38 F-3 38

E, Food Grade F, O/R F

32

Food Grade F, O/R F

32-44 32-45 38

46 46-42 FF, E, Food Grade F,O/R F 38

48 48-44

FF, F-3 253225 FF, F-33832

50 50-46

FF 19

3845 E

E

19-28 19-2922-32 22-3326-38 26-39 32

13-20 13-22 1615-24 15-25 19

52-47

25

FF, F-3

11-17 11-17

Wire Bolt Clamps

Item No. Range of Use(mm)

Metal Plate Bolt Clamps

8-14 8-15ABA Band

54

Unless otherwise noted, concentration of water solution is saturate and it is at normal temperature.

This table is based onimmersion test <our testdata> in chemicals for eachitem (by using pressedsheet), documents, andother company data (rubberhose manufacturers').Therefore, this is based onthe data under staticconditions and aphenomenon (materialchange) might be differentfrom that under thecircumstances of actual use.Please consult us afterconfirming detailed useconditions.

水酸化マグネシウム Magnesium Hydroxide ○

×

A

BCD

○ ○

水酸化ナトリウム（10％） Sodium Hydroxide (10%)水酸化カリウム（Conc） Potassium Hydroxide (Conc)

○

○

○

リン酸（30％） Phosphoric Acid (10%)

○

○

Alk

ali

△

○× ○

○

○

○ ○ ○ ○

× ○ △

○

○ ○○

○

水酸化カリウム（10％） Potassium Hydroxide (10%) ○ ○ △ ○

水酸化アルミニウム Aluminum Hydroxide ○ ○

○

次亜塩素酸カルシウム（15％塩素中） Calcium Hypochlorite (15% in chlorine) ○ ○ × ○

次亜塩素酸カルシウム（Conc） Calcium Hypochlorite (Conc) ○ ×

○

アンモニア（液体） Ammonia (Liquid) × ○ ○ ○

アンモニア（ガス） Ammonia (Gas) ×

○

○

△

Aci

d

アンモニア水（水酸化アンモニウム） Ammonia Aqueous (Ammonium Hydroxide) △ ○ × ○

×

×

○

硫酸（10％） Sulfuric Acid (10%) ○ △ × ○

炭酸 Carbonic Acid ○

△

△

×

硝酸（95％） Nitric Acid (95%) × × × ×

硝酸（70％） Nitric Acid (70%) ×

○

×

○

硝酸（50％） Nitric Acid (50%) △ △ × △

硝酸（5％） Nitric Acid (5%) ○

×

×

○

シュウ酸 Oxalic Acid ○ ○ △ ○

酢酸 Acetic Acid (10%) ○

×

△

△

クロム酸（メッキ液） Chromic Acid Plating Solution (25%) ○ △ × ○

過酸化水素（80％以上） Hydrogen Peroxide (80% or more) ×

C

×

○

過酸化水素（30％） Hydrogen Peroxide (30%) ○ × × ○

過酸化水素（3％） Hydrogen Peroxide (3%) ○

Tiflex Hose / FF, F3, WT, Antistatic W, E, Food Grade F, Hinet HoseTiflex Hose / GL, N, GL-2Tiflex Hose / WS, FC

Tiflex Hose / WATiflex Hose / WR, WR-STiflex Hose / Abrasion Resistant E

水酸化ナトリウム（Conc） Sodium Hydroxide (Conc)水酸化バリウム Barium Hydroxide

×

○

塩酸（Conc） Hydrochloric Acid (Conc.)塩酸（20％） Hydrochloric Acid (20%) △

○ △ △

塩酸（10％） Hydrochloric Acid (10%)塩化水素（無水） Hydrogen Chloride (Anhydrous)

Larg

eC

lass

ifica

tion

Smal

lC

lass

ifica

tion

Oil, Solvent, Chemicals {Concentration Weight %}

○ ○

亜硫酸（10％） Sulfurous Acid

A B

△

△ ○

○

○ ○

○

○ △

○ △

○

Chemical Resistance Guide

D

Resistant properties against each fluid (chemical) are as follows:

○ = Hardly affected △ = Considerably affected (might be used according to conditions) × = Unsuitable

55

Oth

er In

orga

nic

Che

mic

als

○

乳化剤 Emulsifiers △ ○ ○ △

現像液（バイポ） Photographic Developers ○ △ △

○

感光乳剤 Emulsions ○ ○ ○ ○

リン酸カリウム Potassium Phosphate ○ ○ ○

○

硫酸マグネシウム Magnesium Sulfate ○ ○ △ ○

硫酸銅 Copper Sulfate ○ ○ △

○

硫酸鉄 Ferric Sulfate ○ ○ ○ ○

硫酸アルミニウム Aluminum Sulfate ○ ○ △

△

硫化水素 Hydrogen Sulfide × ○ × △

ヨウ素 Iodine × × ×

○

フッ素 Fluorine × × × ○

フッ化カリウム Potassium Fluoride × ○ ○

○

二酸化炭素 Carbon Dioxide × × × △

炭酸マグネシウム Magnesium Carbonate ○ ○ ○

○

炭酸カルシウム Calcium Carbonate ○ ○ ○ ○

炭酸ガス Carbon Dioxide ○ ○ ○

○

水素 Hydrogen ○ ○ △ ○

硝酸銅 Copper Nitrate ○ ○ ○

○

硝酸アンモニウム Ammonium Nitrate ○ ○ ○ ○

重炭酸ナトリウム Sodium Bicarbonate ○ ○ ○

△

重炭酸アンモニウム Ammonium Bicarbonate ○ ○ ○ ○

臭素 Bromine × × ×

○

重クロム酸カリウム Potassium Dichromate ○ × × ○

臭化カリウム Potassium Bromide ○ ○ ○

○ ○ ○

シアン化カリウム Potassium Cyanide ○ ○ ○ ○

酢酸アンモニウム（Conc.） Ammonium Acetate (Conc.) ○

○

酢酸アルミニウム Aluminum Acetate ○ ○ △ △

クエン酸 Citric Acid ○ ○ ○

○

過マンガン酸カリウム Potassium Permanganate ○ × × △

オゾン Ozone △ ○ ×

△

塩素（水溶液） Chlorine (Aqueous Solution) × △ × △

塩素（100％ガス） Chlorine (100% Gas) × △ ×

○

塩素（10％ガス） Chlorine (10% Gas) ○ △ × ○

塩化マグネシウム Magnesium Chloride ○ ○ ○

○

塩化バリウム Barium Chloride ○ ○ ○ ○

塩化ナトリウム Sodium Chloride ○ ○ ○

○

塩化銅 Copper Chloride ○ ○ ○ ○

塩化鉄 Ferrous Chloride ○ ○ ○

○

塩化カルシウム（メタノール中20％） Calcium Chloride (20% in methanol) × ○ ○ ○

塩化カルシウム（Conc.） Calcium Chloride (Conc.) ○ ○ ○

○

塩化カリウム Potassium Chloride ○ ○ ○ ○

塩化アンモニウム Ammonium Chloride ○ ○ ○

○

塩化亜鉛 Zinc Chloride ○ ○ ○

塩化アルミニウム Aluminum Chloride ○ ○ ○

○

B C

○

D

一酸化炭素 Carbon Monoxide ○ ○ △

Larg

eC

lass

ifica

tion

Sm

all

Cla

ssifi

catio

nOil, Solvent, Chemicals {Concentration Weight %} A

56

Oth

erIn

orga

nic

Che

mic

als

Org

anic

Che

mic

als

Keto

ne,

Ethe

r, et

c.C

hlor

inat

ed S

olve

ntO

ther

Org

anic

Che

mic

als

○

ビール Beer ○ ○ △ ○

ソース Sauce ○ ○ ○

○

しょうゆ Soybean Oil ○ ○ ○ ○

酒 Liquors ○ ○ ○

○

変圧器オイル Transformer Oil × × × ○

鉱物油 Mineral Oil × × ×

×

硫酸アニリン Aniline Sulfate ○ × × ○

メチルアルコール（100％） Methyl Alcohol (100%) × ○ ○

×

メチルアルコール（6％） Methyl Alcohol (6%) ○ ○ ○ △

ホルムアルデヒド(40％） Formaldehyde (40%) △ ○ △

△

ベンゼン Benzene × × × ×

ベンジルアルコール Benzyl Alcohol × △ ×

○

プロピレングリコール Propylene Glycol × ○ △ △

ブドウ糖 Glucose ○ ○ ○

△

ブチルアルコール Butyl Alcohol × △ ○ △

フェノール Phenol × △ ×

△

パラフィン Paraffin △ × × ○

トルエン Toluene × × ×

○

テトラヒドロフラン Tetrahydrofuran × △ × ×

デキストリン Dextrin ○ ○ ○

△

セチルアルコール Cetyl Alcohol ○ △ △ △

ステアリン酸 Stearic Acid ○ △ △

△

酢酸エチル Ethyl Acetate × △ × △

クレオソート油 Creosote Oil × × ×

△

グリセリン Glycerin ○ ○ ○ ○

オレイン酸 Oleic Acid △ △ ×

×

エチレングリコール Ethylene Glycol × ○ ○ △

エチルアルコール（100％） Ethyl Alcohol (100%) × ○ ○

△

エチルアルコール（6％） Ethyl Alcohol (6%) △ ○ ○ △

イソプロピルアルコール Isopropyl Alcohol △ ○ △

△

アニリン Aniline × △ × ×

モノクロロベンゼン Monochlorobenzene × × ×

△

パークロロエチレン Perchlorethylene × × × △

ジクロロベンゼン Dichlorobenzene × × ×

×

ジクロロエチレン Dichloroethylene × × × △

四塩化炭素 Carbon Tetrachloride × △ ×

×

クロロホルム Chloroform × × × ×

塩化メチレン Methylene Chloride × △ ×

△

塩化エチレン Ethylene Chloride × △ × ×

メチルエチルケトン Methyl Ethyl Ketone × ○ ×

×

ジエチルエーテル Diethyl Ether × ○ × ×

エーテル Ethers × ○ △

×

塩水 Salt Water ○ ○ ○

アセトン Acetone × ○ △

×

B C

×

D

水 Water ○ ○ ○

Larg

eC

lass

ifica

tion

Sm

all

Cla

ssifi

catio

nOil, Solvent, Chemicals {Concentration Weight %} A

57

Pressure Loss <Fluid: Gas> of Tiflex (GL, GL-2, GL-E)

Pressure Loss <Fluid: Gas> of Tiflex NH-1 <Fluid: Gas>

Pressure Loss Graph of Duct Hose

9.68×10-3 1 7.36×10-2

1.33×10-3 1.36×10-3 1.32×10-3 1.36×10 1

9.68×10-1 1×104 7.36×102

1.01 1.03 1 1.03×104 7.60×102

9.87×10-6 1.02×10-1 7.50×10-3

1 1.02 9.87×10-1 1.02×104 7.50×102

Pressure Unit Conversion Table

9.81

1.33×102

1×10-5 1.02×10-5

9.81×10-1 1

9.81×10-5 1×10-4

1

Pre

ssur

e

Pa(Pascal)

9.81×104

1.01×105

1×105

mmHg or Torr(Mercury Column)

bar(Atmospheric

Pressure)kgf/cm2 atm mmH2O or mmAq

(Water Column)

Air

Flow

Q

Loss of Pressure △P [Pa/Hose 1m]

Air

Flow

Q

Loss of Pressure △P [Pa/Hose 1m]

58

※

※ Above data is not the standard value, but the test value.

Tiflex HoseFC type

Tiflex HoseWR-S type

Above data show a stretch rate of length direction by applying water pressureinto a hose under normal temperature and under straight pipe condition.

3.6

2.22.10.7 1.0 ―

―200 2.6 3.2 3.3

―

150 2.5 2.8 3.0 3.3 ―

100 1.7 2.0―

38 0.4 0.6 0.8 ― ―

50 0.4

― ―

Tiflex Hose

F-3 type

Item Name Diameter(φ)

Hose Stretch Rate (%)

0.5MPa (5kgf/cm2) 1.0MPa (10kgf/cm2) 1.5MPa (15kgf/cm2) 2.0MPa (20kgf/cm2)

200 14.1 ― ―

― ―

125 11.5150 13.1 ― ―

― ―

― ―

― ―

― ―

100 9.5 ― ―

75 7.3 15.7 ―

― ―

50 5.265 7.4 14.3 ―

12.6 ―

― ―

― ―

― ―

38 6.0 13.6 ―

32 4.3 11.1 15.1

―

Tiflex Hose

WS type

25 3.9 8.9 14.2 ― ―

300 3.2 6.0 ―

――

―

―

250 2.7 5.0 ― ― ―

200 2.5 4.3― ―

125 1.7150 2.5 3.4 ―

2.9 ―

― ―

― ―

― ―

100 1.6 4.4 8.775 2.0 3.0 6.1

― ―

50 2.265 2.0 4.0 8.4

3.2 4.8

― ―

― ―

― ―

38 1.6 3.4 4.432 3.7 5.3 7.0

1.0MPa (10kgf/cm2)

25 3.4 4.3 4.9 ― ―

4.2 4.53.2

Tiflex Hose

New WR type

Item Name Diameter(φ)

Hose Stretch Rate (%)

0.2MPa (2kgf/cm2) 0.4MPa (4kgf/cm2) 0.6MPa (2kgf/cm2) 0.8MPa (8kgf/cm2)

300 2.8 3.5

3.8 4.0250 2.3 3.2 3.4 4.2 4.5200 2.1 2.8 3.2

2.82.5 2.9150 1.6 2.5 2.7 3.3 3.5125 1.2 2.0

1.9 2.175 0.3

100 1.0 1.4 1.60.5 0.6

0.8 0.80.7 0.80.7 0.8

65 0.3 0.4 0.550 0.4 0.6 0.7

Pressure and Stretch Rate

0.70.3 0.4 0.5 0.738

59

Working Pressure (MPa {kgf/cm2} (at φ50)

Note:

1)

2) Use metal fixtures of which sleeve part has jagged surface.

3)

4)

Retighten accordingly because tightening force of clamps is graduallyreduced by stress relaxation. However, be careful not to break hose due toapplying exceeded tightening force.

0.5 {5.1}

Pressure performance of thehose is significantly affecteddepending on the fluid andambient temperature. The tableon the right side indicatesexamples of working pressureat 20℃ and 50℃.

Tiflex HoseNew WR type

20 0.3 {3.1} 0.5 {5.1} 1.0 {10.2}

When a hose is tightened by R-Power Band at work site,please refer to the right sidetable as a guide.

NominalDia.(φ)

Temperature and Working Pressure

Standard of tightening for R-Power Band

Temp.(℃)

Tiflex HoseF-3 type

Tiflex HoseWS type

50 0.15 {1.5} 0.25 {2.6}

Tiflex Hose WS type

Torque (N, m) {kgf, cm} Number of band

38 10 {100} 1 15 {150}

15 {150}

Tiflex Hose New WR type

Torque (N, m) {kgf, cm} Number of Hose

1

2

2

50 10 {100} 2

65 10 {100} 2 20 {200}

2

100 15 {150} 2 25 {250} 2

75 10 {100} 2 20 {200}

2

150 15 {150} 2 25 {250} 2

125 15 {150} 2 25 {250}

2

250 15 {150} 2 25 {250} 2

200 15 {150} 2 25 {250}

In case you use commercially available metal fixture, it might not be tightenenough as written above because of the nipple's shape.

2

For WS, New WR type and WR-S, the way of fitting with steel rods forwelding to prevent from sudden fall-off of fixture shall be our standard.We recommend you to order these hoses with appropriate metal fixtures.

300 15 {150} 2 25 {250}

60

※ Please consult us after sufficient confirmation through above content.

Dim

ensi

onM

etal

Fix

ture

sC

uffs

Spec

ifica

tion

Use Conditions

Inner DiameterOuter Diameter

LengthPacking

Mat

eria

l

Necessity / Type of MetalFixtures

Fitting MethodType of Clamps

Actual Size (mm)

Actual Size (mm)

Entire Length include metal fixture or of only hose

Acceptance of bend remaining

Please consult us about chemical substances which areprohibited to use or the regulation of content amount.

HoseMetal Fixture

Others

PVC, Non-PVC, etc.

Iron, stainless, aluminum, etc.

With metal fixture (one or both ends), or only hoseWith JIS ( ) kgs flange (fixed, loose), S shape collar, Gshape collar, male screw, etc.Please consult us about the other special metal fixtures.

Outer socket caulking, inner coupler expansion, R-powerband, etc.Please consult us about the other special fitting methods.

Concentration

Specific GravityTemperature

Flow Volume, Flow Rate

Concentration (%) of chemicals, etc.PH of acid or alkali.

Specific gravity, density (g/cm2, kg/cm2) of fluid.Fluid temperature (℃)

m3/hour, L/hour, m/second

Duration of use (consecutively or continuously)

Plumbing drawing, performance drawing, plumb by slingingor on a floor, etc.Conditions of Installation

Bending Radius in Use Use hoses bent with bending radius or more.

Operating Cycle Repeated bending cycle, etc.

Place of Use Outdoor, indoor, under water, at sea, in soil, etc.

External Pressure MPa (kgf/cm2)

Vertical interval of plumbing

Peak Pressure

Manufacturer's name, item name, duration of use, etc.

Regulations

Storage Condition

Applicable Law and StandardPast Use History

Storage periodStorage environment (outdoor, indoor, ambient temperature)

Food Sanitation Law, etc.


ApplicationEquipment NameIntended Purpose

Pres

sure

Delivery: MPa (kgf/cm2)Suction: -KPa (-mmHg, -mmAq)

MaximumWorking Pressure

Pump maximum pressureAssumed impact pressure

Vertical Interval

Flui

d

℃

Item Content Checkcolumn

Fluid Type Liquid (water, oil, chemical), gas, powder, etc.

Surr

ound

ing

Envi

ronm

ent

Inst

allin

gM

etho

d

Duration of Use

Outside Air Temperature

Use

Con

ditio

ns

Performance

Stor

age

61

【重要】1. tiflex hose catalog · general hose heavy duty / abrasion resistant hose antistatic...

Documents