ee3 series subminiature valves - clippard minimatic...229 ee3 series sub-miniature valves clippard...
TRANSCRIPT
229
EE3 SERIES SUB-MINIATURE VALVES
Clippard Instrument Laboratory, Inc. (513) 521-4261 www.clippard.com
EE3 SERIES SUBMINIATURE VALVES
Snap in & latchedelectrical connectorLED for confirmation of
operation and diodes forcurrent spike suppression
Manual override plungerprovides valve actuationwithout electrical power
Molded thermoplastic body withone piece gasket for manifoldmounting
Enclosed solenoid coilavailable in 12 or 24 VDC
All the benefits of Clippard quality and reliability areavailable in our Double E-3 normally closed 3-way valve,an American made 10 mm subminiature electronic valve.A normally open model is also available.
The Double E-3 has a high strength, lightweight engineeredthermoplastic body, making it suitable for a wide range ofapplications. Since it has few moving parts, the Double E-3is subject to less wear, and has a longer life.
Double E-3 Valves are available factory assembled onmanifolds
EE3 SERIES SUB-MINIATURE VALVES
230 Clippard Instrument Laboratory, Inc. (513) 521-4261 www.clippard.com
Features• Made in USA
• Miniature size
• 12 and 24 VDC
• Direct acting
• Fast response
• Few moving parts
• High flow/low power
• Made of high strengthengineered thermoplastic
VALVENUMBERINGSYSTEM
Product TypeEE - Double E Valve
Coil ConnectionT - Plug Orifice Options
Blank - Standard FlowH - High Flow
Valve Type3 - 3 Way (N.C.)
Voltage12 VDC24 VDC
Blank - Normally ClosedO - Normally Open
E E 3 ❑ - T ❑ - ❑ ❑ - ❑
• Manifold mount
• LED for confirmation of operation
• Spike suppression diodes
• High visibility manual override
• Universal orientation
• Enclosed integral electronics
• One-piece gasket eases installation
• Short stroke, low mass poppet
• Corrosion resistant molded body
• Electrical plug snaps in - clip latched
Electrical OptionsL - LED & DiodesO - None
UniquePortingMethod
Unlike other valves, Double E-3 supply portsand exhaust ports are locatedon the output side of themanifold, rather than on themanifold ends. This means lessspace required, and a smaller, more effective work envelope.
Other configurations are available.
Double E-3 valves are available factory assembled on manifolds.
231
EE3 SERIES SUB-MINIATURE VALVES
Clippard Instrument Laboratory, Inc. (513) 521-4261 www.clippard.com
Snap-in Socket
LED and EnclosedIntegral Electronics
High VisibilityManual Override
Mounting Screws
High StrengthEngineeredThermoplasticConstruction
One Piece HighVisibility Gasket
Enclosed CoilAssembly
EE3-TO-24
EE3 SERIES 3-WAY SUB-MINIATURE VALVES
232 Clippard Instrument Laboratory, Inc. (513) 521-4261 www.clippard.com
EE3-T❑-❑
.265
.395
.722
.500
outlet
.220.045
.100.162
exhaust
.055 typ.
.090
.105inlet
.025 square typ.
1.087
0 - 80 thd.
.100
.432
1.346
.220
Medium: air, gas
Pressure: Standard: 0-100 PSIHigh Flow: 0-60 PSI
Air Flow: Standard: 30 scfh @ 100 PSIHigh Flow: 30 scfh @ 60 PSI
Electrical: 12 VDC or 24 VDC -Allowable variation + 10%LED and spike suppression diodesstandard (No LED and diodes optionavailable)
Double-E 3-way valvenormally closed
Electrical Connection: Custom plug with12” long #22 AWG, 19 strand, 105˚CPVC insulation lead wires
Power Consumption:1.4 watts (with LED and diodes)1.1 watts (24 VDC coil only)
Response: 10 milliseconds
Manual Override: High visibilitymomentary push button
Material: Wetted parts are acetal, nylon,nickel plated steel, stainless steel, andBuna-N
Temperature Range: 30˚ - 180˚ F
EE30-T❑-❑
.265
.395
.722
.500
outlet
.220.045
.100.162
inlet
.055 typ.
.090
.105exhaust
.025 square typ.
1.087
0 - 80 thd.
.100
.432
1.346
.220
N O
Medium: air, gas
Pressure: Standard: 0-100 PSIHigh Flow: 0-60 PSI
Air Flow: Standard: 30 scfh @ 100 PSIHigh Flow: 30 scfh @ 60 PSI
Electrical: 12 VDC or 24 VDC -Allowable variation + 10%LED and spike suppression diodesstandard (No LED and diodes optionavailable)
Double-E 3-way valvenormally open
Electrical Connection: Custom plug with12” long #22 AWG, 19 strand, 105˚CPVC insulation lead wires
Power Consumption:1.4 watts (with LED and diodes)1.1 watts (24 VDC coil only)
Response: 10 milliseconds
Manual Override: High visibilitymomentary push button
Material: Wetted parts are acetal, nylon,nickel plated steel, stainless steel, andBuna-N
Temperature Range: 30˚ - 180˚ F