eev production catalogue · 2012. 7. 25. · tangtou industrial zone, oubei town, wenzhou city,...
TRANSCRIPT
Tangtou industrial zone, Oubei Town, Wenzhou City, Zhejiang province, P.R.China. 325102 Phone: +86 1375 773 5721 - Fax: +86 577 67990709 -E-mail: [email protected]
www.chinaduckbillvalve.com
EEV Production Catalogue
Your Flow Business Partner!
Easternflex Elastomeric Valves Co., LTD Tangtou Industry Zone, Oubei, Wenzhou, Zhejiang Province, R.P.China. 325102
Phone: Fax: +86 1375 773 5721 +86 577 67990709 www.chinaduckbillvalve.com [email protected]
Easternflex Elastomeric Valves Co., LTD
EEV www.chinaduckbillvalve.com 2011 Provided data is not Contractual, data may be changed without notice. All rights reserved EEV.
About Us
Easternflex Elastomeric Valve Co., Ltd (EEV) as a Chinese professional water treatment, mining ,
and other system valves supplier was established in 2001.We specialize in manufacturing series of
Duckbill check valve, Pinch valve, knife gate valve, soft seal gate valve, Rubber expansion joint,
etc. EEV team always takes every detail seriously High quality, Competitive prices, Fast delivery
and a Friendly service.
EEV products are sold and distributed throughout all over the world. We also make abroad
customers brand onto the production as OEM service. Our products are all tested and inspected by
our quality control center, before delivery. And each product from EEV factory are promised a 12
months quality warranty.
We thanks for your time to visit our website. Please don’t hesitate to contact with us if you have
any inquiry. EEV will be your best business partner in the future.
Easternflex Elastomeric Valves Co., LTD
EEV www.chinaduckbillvalve.com 2011 Provided data is not Contractual, data may be changed without notice. All rights reserved EEV.
EEV Duckbill valve RH-41 SERIES
EEV Duckbill valves are non-return axial water flow valves made of layers fabric and rubber
material reinforced. And widely used for large pipe diameter flows with low back pressures, such
as sea coast, sand beach, sea port, city release water,etc.
With Sample design and one piece rubber construction, EEV Duckbill valves provide a safe and
dependable backflow prevention service. The valves have a low opening pressure and is self-
draining which eliminates standing water and maximizes storage volume in the upstream pipe.
EEV Duckbill valve is manufactured of
flexible rubber material reinforced with fabric
material. Its geometry consists of a shot piece
of duckbill-like rubber tube at one end, a
round flange typically clamped onto a pipe
port at the other, and a saddle shape at the
middle.
Features: 1. 100% rubber construction.
2. Won’t corrode, warp or freeze open or
shut
Fig 1 (By ASME)
3. 1’’ opening pressure, low head loss.
4. Low cost both valves and installation.
5. Low maintenance costs
6. Cannot be propped open.
A. Tamper and vandal proof.
B. Children and animals cannot enter.
C. Backflow prevention assured.
7. Zero operating costs, Zero life-cycle costs.
8. Non-slamming, no noise, no vibration.
9. Absolute backflow prevention saves money.
A. Reduces flood liability.
B. Lowers re-treatment costs.
C. Helps to eliminate compliance violations.
D. Reduces beach erosion.
E. Keeps infrastructure form shutting down (Roads, Airports and Businesses).
F. Eliminates complaints from constituents.
10. Rubber construction and less environmental impact from rust and corrosion.
11. Prevents buildup of mussels.
12. Silp-on , flanged, curved bill type or other type is on your request.
Easternflex Elastomeric Valves Co., LTD
EEV www.chinaduckbillvalve.com 2011 Provided data is not Contractual, data may be changed without notice. All rights reserved EEV.
Shell of Construction: EEV Duckbill valve is available in
Nature Rubber, Buna-N, EPDM,
Viton. Other materials are on requests.
The shell of duckbill valve actually is
sandwich structure which consists of
3 upper layers of rubber and 2lower
layers of rubber with 2 layers of fabric
reinforcement in the middle. Each
rubber layer is 2mm thick, each
woven fabric layer is around 1mm thick. So the total thickness of the rubber matrix hosting fabric
reinforcement is approximately 12-13mm.
DN800 Flow rate & headloss fig
ID 100 150 200 250
C 40 50 50 75
W 170 230 310 380
FF 195 270 320 360
ID 300 350 … 2400
C 115 115 … 550
W 460 540 … 3730
FF 450 560 … 3450
Note: 1. The size is available up to DN3000; please contact us for your special request.
2. Please contact with us for other ID sizes.
Order Information:
Flow Rate Line Pressure Back Pressure
Minimum
Maximum
Easternflex Elastomeric Valves Co., LTD
EEV www.chinaduckbillvalve.com 2011 Provided data is not Contractual, data may be changed without notice. All rights reserved EEV.
APPLICATION:
Pumping Station Seawall
Sewer Systems Effluent Discharge
Storm water Discharge Site Drainage
Easternflex Elastomeric Valves Co., LTD
EEV www.chinaduckbillvalve.com 2011 Provided data is not Contractual, data may be changed without notice. All rights reserved EEV.
EEV Knife Gate Valve PZ-41 Series
EEV knife gate valve series is designed full bore resilient or metal seated for slurries, powders and
sludges. With types flange, wafer, and lugs.
Parts list and Material
No. Parts name Material
1 O-ring EPDM NBR
2 Seal EPDM NBR
3 Body WCB CF8 CF8M
4 Packing EPDM, PTFE
5 Gland WCB
6 Disc 2Cr13 CF8 CF8M
7 Chuck WCB
8 Yoke Plate 2Cr13 CF8 CF8M
9 Stem WCB
10 Bearing Steel
11 Bush QT450
12 Stem Nut Brass
13 Hand wheel Steel
14 Lock nut 45#
Features: 1. Pressure Rating:
10bars 2’’-24’’, 5 bars 36’’.
2. Sizes :
available from 2’’ to 80’’.
3. Temperature rating:
EPDM Seat: -20 ℃ to 110 ℃
Viton Seat: -20℃ to 130 ℃
Metal Seat:-45℃ to 230 ℃
4. Flange drilling:
ANSI 125/150 Class
DIN, BS or other standard is available,
Consult us for more information
5. Testing:
Each EEV Knife gate valve is fully tested in our factory before delivery. Test includes shell
test, seat test. Additional testing is also available. Consult us for your request.
• Standard Shell test: Hydro test at 1.5 times the rated – Zero allowable leakage
• Standard Resilient Seat test: Hydraulic test at 15 psi (1 bar) and rated
Easternflex Elastomeric Valves Co., LTD
EEV www.chinaduckbillvalve.com 2011 Provided data is not Contractual, data may be changed without notice. All rights reserved EEV.
Design Selection:
Wafer Lug Flange
Model:
For other model selection, please contact us for more information.
Model20 Model20C
Model30
Model30A Model40 Model70
Easternflex Elastomeric Valves Co., LTD
EEV www.chinaduckbillvalve.com 2011 Provided data is not Contractual, data may be changed without notice. All rights reserved EEV.
EEV Pinch valve GJ-41 Series
EEV GJ41-6/10 Series handle wheel operated pinch valve used for kinds of slurries. Made from
high quality elastomeric materials, flanges can be drilling to ANSI, GOST, DIN, JIS, or any other
standard. Design to solve process
problems with flowing which is
abrasive or corrosive. EEV pinch
valve is widely used the mineral
processing, pulp and paper, power
plant, chemical industry, etc.
EEV pinch valve is simple
designed which means seatless,
glandless, packlingless, etc. The
rubber sleeve is the only wetted
part of the valves. And the sleeves
can be easily changed.
Advantages of EEV pinch valve series:
1. Simple design, simple operation.
2. Tight shut and off
3. Low cooperation costs.
4. Full port design
5. No packing to replace or maintain.
Note: Other size or drilling standard is available, please contact us for more information.
Easternflex Elastomeric Valves Co., LTD
EEV www.chinaduckbillvalve.com 2011 Provided data is not Contractual, data may be changed without notice. All rights reserved EEV.
EEV Gate Valve Z-41 Series
Features: 1. Design and manufacture can be confirmed with DIN, AWWA, ANSI, BS, etc.
2. Flanges confirm to ANSI B16.1 Class125 150, or any other standard or non-standard.
3. Ease of operation. The gate is fully supported throughout travel by an integrally cast tongue
and groove fit between it and the valve body. Lugs on the gate fully engage the coated guides
cast into the valve body so the gate closed smoothly every time.
4. Positive sealing. A dual rubber seal is formed between the rubber encapsulated resilient
wedge and the valve body to guarantee drop-tight shut-off every time. The combination of
true compression and dynamic wedging of the gate is
created without harmful sliding, shearing or other
wear-inducing action.
5. Full flow capacity. The EEV Resilient gate valve features
an unobstructed, thru-conduit flow path for full flow
capacity. Closed, the RSGV provides bottle-tight, zero
leakage in either direction at full rated differential pressure
with dual body gate seating.
11 Holding ring Brass
10 o-ring NBR/EPDM
9 Sealing ring PTFE
8 Bonnet nut Brass
7 Dust ring NBR/EPDM
6 Hand wheel GGG40
5 Bonnet GGG40
4 Stem SS420
3 Stem Nut Brass
2 Disc GGG40 with EPDM
1 Body GGG40
No. Name Material
Easternflex Elastomeric Valves Co., LTD
EEV www.chinaduckbillvalve.com 2011 Provided data is not Contractual, data may be changed without notice. All rights reserved EEV.
EEV Rubber Expansion Joint RJT-31 Series
Easternflex Elastomeric Valves Co., LTD
EEV www.chinaduckbillvalve.com 2011 Provided data is not Contractual, data may be changed without notice. All rights reserved EEV.
Tangtou industrial zone, Oubei Town,
Wenzhou City, Zhejiang province, P.R.China. 32510
Phone: +86 1375 773 5721
Fax : +86 5776 799 0709
E-mail: [email protected]
www.chinaduckbillvalve.com