efficient-tec international, llc
TRANSCRIPT
Efficient-Tec International, LLCWalkway Handrail Stairway Handrail Illuminated Handrail Wire Rope Infills Rod Infills Glass Infills Spiral Staircases Glass Canopies
introduction
code compliance
handrail systems
the shop
terms and condition pg. 66
pg. 62 - 65
pg. 16 - 61
pg. 14 - 15
pg. 12 - 13
ETI Stainless Steel Systems catalog 000102 SRP $4.50 pg. 3www.ETI-S3.com
Superdome photos courtesy of Rob Liggiopg. 4 www.ETI-S3.com proudly made in the USASuperdome handrail, New Orleans LA
end cap
M6-1.0 x 10mm FSHCS for saddle to handrail support attachment
TIG weld corner
stainless steel Ø 1.67”Drill and tap for (2) M5 - 0.8 BHCS at each post attachment (typ.)
adjustable angle handrail support, screw into post cap(use on sloped guardrail only)
typical rail assembly
tube connector
saddle
M5-0.8 x 12mm BHCS for rail attachment
straight handrail support, screw into post cap
use on all level guardrail
bottom holder
rosette
pg. 12 www.ETI-S3.com proudly made in the USAS3 handrail introduction
stainless steel Ø 1.67” tube field cut as required, all ends deburred.
welded 90° elbow
mountingbolts (x3)
stainless steel Ø 1.67”steel posts milled and inserted with LED path lights
embedded postwith power feed
rosette
metal post polished to optional mirror finish
Ef cient-Tec International LLC offers a complete handrail solution for your code compliant projects. ETIs S3 (stainless steel systems) handrail solutions can meet any requirement, either from our standard line of products or with modi cation from the in house engineering and fabricating staff.
Design: modular non-welded system or welded systems.
Your solutions are all here whether using our new LED illuminated handrail (LEDRail™), standard guardrail, stairway handrail or spiral staircase handrail. The choices for project compliments are expanded with our standard steel rod, cable or glass guardrail in lls. Our product line gives architects, designer and speci ers multiple options in ttings, mountings and decorative elements that will deliver the quality product demanded by ETI clientele.
We look forward to assisting your next handrail solution
SincerelyEf cient-Tec International, LLC S3 Handrail Systems
THE PRODUCTS IN THIS CATALOG ARE TESTED AND HAVE BEEN FOUND TO CONFORM TO THE APPROPRIATE UL STANDARDS FOR SAFETY.
SOLAVANTI LIGHTING UTILIZES THE TESTING AND CERTIFICATION SERVICE OF ETL, A NATIONALLY RECOGNIZED TESTING LABORATORY.
pg. 13www.ETI-S3.com
4
7
UP 21 RISERS UP
3
SPLICE
1158"(-)
11316"(-)
1316
"58"
1316
"ELECT
58"
98'-0 13
S3 handrails are always built to ADA, IBC and IRC codes but can be specified according to any of the listed bulding standards.
Handrail Code Compliance
pg. 14 www.ETI-S3.com proudly made in the USAcode compliance
ELECT
5
86'-0"
R65'-11316"
CENTER OF H.R.
1
1/8" ALUM. PL. PERF. PANELW/2" BORDER
UP 21 RISERS
UP
ELECT
4
4
R65'-10"
TO STO
NE TREADSPLICE
8
2
5
1/8" ALUM .PL. PERF. PANELW/2" BORDER
R71'-778"
TO STO
NE TREAD
READA60.0000FINISH TR0.0 R
3/32"
When requesting a quotation or specifying our handrail products, please provide as much information as possible in order to insure a more accurate specification and quotation. Fully dimensioned plan view and elevation view drawings are requested in order to fullyunderstand the scope of the project.
Upon acceptance of the order, we will prepare detailed approval drawings for field verification and acceptance by the customer. Once the drawings are verified for accuracy and approved with a customer signature, we will begin the manufacturing process.
Handrails and Guardrails
• handrails provide guidance• guardrails prevent accidental falls
Handrails are located 34”- 38” above stair nosings or ramps.
Guardrails are generally required for ramps, stairs, or landings that are elevated more than 30” off the ground. The guardrail heights will vary depending upon local code, but typically are a minimum of 42” in height above the ramp, stair, or landing finished floor surface.
Incorporating S3 handrail into your project:
pg. 15www.ETI-S3.com
standard wall bracket
Ø 1.67 handrail
handrail support
optional wall bracket
handrail support
34”
34”
2-1/2” 2-1/2”
LEDRail™(optional)
Standard Wall Rail Design
Model Name: MYRIS
This is the Ef cient-Tec torchbearer as our original design. It uses a simple yet elegant look to use in any wall mount handrail application. This design comes in stainless steel alloy 316 standard, as well as aluminum, brass, bronze and stainless steel alloy 304. A number of nishes can be accommodated to t the style of your needs.
ApplicationWall Mount
Handrail Materialstainless steel, aluminum, brass, bronze
Options
illuminated LEDRail, curved or spiral, Non-Illuminated , standard bracket
Available LED ColorsWarm White 2700K, Warm White 3100K, Natural White 4100K, Cool White 6300K, Amber, Red, Blue, Green, Yellow and RGB
Lighting LevelsMedium Output - 120 lumens per foot, High Output – 200 lumens per foot and special output levels available on request
Mounting Optionsadjustable bracket
Finish#4, #6, #8 mirror polish, powder coat, anodize
pg. 17www.ETI-S3.com
Superdome photos courtesy of Rob Liggiopg. 18 www.ETI-S3.com proudly made in the USAOne Line Rail Design
handrail supportØ 1.67 handrail end cap
Ø 1.90” post
LEDRail™(optional)
standard embed mount48” max.
34”
One Line Rail Design
Model Name: `
This popular free standing, one line rail design incorporates a sleek and contemporary look with no in ll between posts. It is available for illuminated and non-illuminated applications. A variety of mounting options can be used, including embed, fascia, and base plates. This design comes in stainless steel alloy 316 standard, as well as aluminum, brass, bronze and stainless steel alloy 304. A number of nishes can be accommodated to t the style of your needs.
ApplicationFree Standing
Post Materialstainless steel, aluminum, brass, bronze
Handrail Materialstainless steel, aluminum, brass, bronze
Options
illuminated LEDRail, curved or spiral, Non-Illuminated ,
Available LED ColorsWarm White 2700K, Warm White 3100K, Natural White 4100K, Cool White 6300K, Amber, Red, Blue, Green, Yellow and RGB
Lighting LevelsMedium Output - 120 lumens per foot, High Output – 200 lumens per foot and special output levels available on request
Mounting Optionsembed, fascia mount
Finish#4, #6, #8 mirror polish, powder coat, anodize
pg. 19www.ETI-S3.com
handrail supportØ .472 rod end cap
rod holder (typ.)optional sidemount rail
34”
4” (typ)
48” max.
42”
3-1/8”
Ø 1.90” post
standard embed mount
LEDRail™(optional)
Ø 1.67 handrail
Horizontal Rod Design
Model Name: ALANE
This horizontal rail application is accented by multiple 3/8” to 9/16” thickness horizontal solid rods as the in ll between posts. It is available for illuminated and non-illuminated applications. A variety of mounting options can be used, including embed, fascia, and base plates. This design comes in stainless steel alloy 316 standard, as well as aluminum, brass, bronze and stainless steel alloy 304. A number of nishes can be accommodated to t the style of your needs.
ApplicationFree Standing
Post Materialstainless steel, aluminum, brass, bronze
Handrail Materialstainless steel, aluminum, brass, bronze
Cap Rail Materialstainless steel, aluminum, brass, bronze, wood
Options
illuminated LEDRail, curved or spiral, non-illuminated handrail
Available LED ColorsWarm White 2700K, Warm White 3100K, Natural White 4100K, Cool White 6300K, Amber, Red, Blue, Green, Yellow and RGB
Lighting LevelsMedium Output - 120 lumens per foot, High Output – 200 lumens per foot and special output levels available on request
Mounting Optionsadjustable bracket, inline cap, embed, fascia mount
Finish#4, #6, #8 mirror polish, powder coat, anodize
pg. 21www.ETI-S3.com
34”
48” max.
42”
3/8” cleartempered glass
handrail support end cap
standard embed mount
optional sidemount rail
glass clamp
LEDRail™(optional)
Ø 1.90” post
3”
Glass Clamp Fitting Design
Model Name: FELLE
This is the classic standard of in line glass clamp design to hold the glass in ll panels in .375” or .500” thickness. It is available for illuminated and non-illuminated applications. A variety of mounting options can be used, including embed, fascia, and base plates. This design comes in stainless steel alloy 316 standard, as well as aluminum, brass, bronze and stainless steel alloy 304. A number of nishes can be accommodated to t the style of your needs. Glass can be etched with a company logo as well.
ApplicationFree Standing
Post Materialstainless steel, aluminum, brass, bronze
Handrail Materialstainless steel, aluminum, brass, bronze
Cap Rail Materialstainless steel, aluminum, brass, bronze, wood
Options
illuminated LEDRail, curved or spiral, non-illuminated handrail
Available LED ColorsWarm White 2700K, Warm White 3100K, Natural White 4100K, Cool White 6300K, Amber, Red, Blue, Green, Yellow and RGB
Lighting LevelsMedium Output - 120 lumens per foot, High Output – 200 lumens per foot and special output levels available on request
Mounting Optionsadjustable bracket, inline cap, tempered glass, laminated glass, etching, embed, fascia mount
Finish#4, #6, #8 mirror polish, powder coat, anodize
pg. 23www.ETI-S3.com
handrail support end cap
42”
48” max.
3/8” tempered glass
inline panel retainer
LEDRail™(optional)
3”
Ø 1.90” post
standard embed mount
Ø 1.67 cap rail
Ø 1.67”handrail
optional sidemount rail
34”
2-1/2”
Inline Retainer Design
Model Name: SANIA
This inline retainer design is used with glass in ll panels .375” or .500 thickness. The button mounts are attached to the center of the posts, creating an offset glass in ll. It is available for illuminated and non-illuminated applications. A variety of mounting options can be used, including embed, fascia, and base plates. This design comes in stainless steel alloy 316 standard, as well as aluminum, brass, bronze and stainless steel alloy 304. A number of nishes can be accommodated to t the style of your needs.
ApplicationFree Standing
Post Materialstainless steel, aluminum, brass, bronze
Handrail Materialstainless steel, aluminum, brass, bronze
Cap Rail Materialstainless steel, aluminum, brass, bronze, wood
Options
illuminated LEDRail, curved or spiral, non-illuminated handrail
Available LED ColorsWarm White 2700K, Warm White 3100K, Natural White 4100K, Cool White 6300K, Amber, Red, Blue, Green, Yellow and RGB
Lighting LevelsMedium Output - 120 lumens per foot, High Output – 200 lumens per foot and special output levels available on request
Mounting Optionsadjustable bracket, inline cap, tempered glass, laminated glass, etching, embed, fascia mount
Finish#4, #6, #8 mirror polish, powder coat, anodize
pg. 25www.ETI-S3.com
3/8” tempered glass
42”
48” max.
dual panelretainer
LEDRail™(optional)
standard embed mount
3”
Ø 1.90” post
handrail supportØ 1.67 cap rail end cap
Ø 1.67”handrail
single panelretainer
optional sidemount rail
34”
2-1/2”
Dual Glass Panel Retainer Design
Model Name: STRIA
This dual retainer design is used with in line glass in ll panels .375” or .500 thickness. The button mounts are attached to the center of the posts and offset, creating a center mounted glass in ll. It is available for illuminated, additional edge illumination, and non-illuminated applications. A variety of mounting options can be used, including embed, fascia, and base plates. This design comes in stainless steel alloy 316 standard, as well as aluminum, brass, bronze and stainless steel alloy 304. A number of nishes can be accommodated to t the style of your needs. Glass can be etched with a company logo as well.
ApplicationFree Standing
Post Materialstainless steel, aluminum, brass, bronze
Handrail Materialstainless steel, aluminum, brass, bronze
Caprail Materialstainless steel, aluminum, brass, bronze, wood
Options
illuminated LEDRail, curved or spiral, non-illuminated handrail
Available LED ColorsWarm White 2700K, Warm White 3100K, Natural White 4100K, Cool White 6300K, Amber, Red, Blue, Green, Yellow and RGB
Lighting LevelsMedium Output - 120 lumens per foot, High Output – 200 lumens per foot and special output levels available on request
Mounting Optionsadjustable bracket, inline cap, tempered glass, laminated glass, etching, embed, fascia mount
Finish#4, #6, #8 mirror polish, powder coat, anodize
pg. 27www.ETI-S3.com
42”
48” max.
handrail support end cap
perforated panel(design may vary)
panelholder
LEDRail™(optional)
Ø 1.90” post
3”
profile retainer
standard embed mount
34”
optional sidemount rail
Perforated Panel Design
Model Name: ZARIA
This design uses metal in ll panels between posts. Hundreds of panel designs are available, from perforated metals to metal meshes and weaves. It is available for illuminated and non-illuminated applications. A variety of mounting options can be used, including embed, fascia, and base plates. This design comes in stainless steel alloy 316 standard, as well as aluminum, brass, bronze and stainless steel alloy 304. A number of nishes can be accommodated to t the style of your needs.
ApplicationFree Standing
Post Materialstainless steel, aluminum, brass, bronze
Handrail Materialstainless steel, aluminum, brass, bronze
Cap Rail Materialstainless steel, aluminum, brass, bronze, wood
Options
illuminated LEDRail, non-illuminated handrail
Available LED ColorsWarm White 2700K, Warm White 3100K, Natural White 4100K, Cool White 6300K, Amber, Red, Blue, Green, Yellow and RGB
Lighting LevelsMedium Output - 120 lumens per foot, High Output – 200 lumens per foot and special output levels available on request
Mounting Optionsadjustable bracket, inline cap, embed, fascia mount
Finish#4, #6, #8 mirror polish, powder coat, anodize
pg. 29www.ETI-S3.com
Ø 1/4” 7 x 7wire rope
end capØ 1.67” caprail handrail support
42”
48” max.
optional sidemount rail
Ø 1.67” cap
34”
standard embed mount
Ø 1.90” post
wire rope
3-1/8”
3-1/8”
LEDRail™(optional)
Cable Through Post Design
Model Name: HELIA
This is the classic standard of a through-the-post cabling system incorporating a discreetly located cable tensioner inside the end posts. It is available for illuminated and non-illuminated applications. A variety of mounting options can be used, including embed, fascia, and base plates. This design comes in stainless steel alloy 316 standard, as well as aluminum, brass, bronze and stainless steel alloy 304. A number of nishes can be accommodated to t the style of your needs.
ApplicationFree Standing
Post Materialstainless steel, aluminum
Handrail Materialstainless steel, aluminum, brass, bronze
Cap Rail Materialstainless steel, aluminum, brass, bronze, wood
Options
illuminated LEDRail, curved or spiral, non-illuminated handrail
Available LED ColorsWarm White 2700K, Warm White 3100K, Natural White 4100K, Cool White 6300K, Amber, Red, Blue, Green, Yellow and RGB
Lighting LevelsMedium Output - 120 lumens per foot, High Output – 200 lumens per foot and special output levels available on request
Mounting Optionsadjustable bracket, inline cap, embed, fascia mount
Finish#4, #6, #8 mirror polish, powder coat, anodize
pg. 31www.ETI-S3.com
42”
end cap Ø 3/16” 7x7 wire rope handrail support Ø 1.67 caprail
48” max.
tensioner
LEDRail™(optional)
rope holder (typ.)
3-1/8”
3-1/8” (typ.)
Ø 1.90” post
standard embed mount
optional sidemount rail
34”
Offset Cable Design
Model Name: ENCIA
This popular model puts a twist on the standard cabling system by offsetting the cable to the posts by using individual holders at each post for each cable. This is a very modern and technical design with surface mounted machined hardware. It is available for illuminated and non-illuminated applications. A variety of mounting options can be used, including embed, fascia, and base plates. This design comes in stainless steel alloy 316 standard, as well as aluminum, brass, bronze and stainless steel alloy 304. A number of nishes can be accommodated to t the style of your needs.
ApplicationFree Standing
Post Materialstainless steel, aluminum
Handrail Materialstainless steel, aluminum, brass, bronze
Cap Rail Materialstainless steel, aluminum, brass, bronze, wood
Options
illuminated LEDRail, curved or spiral, non-illuminated handrail
Available LED ColorsWarm White 2700K, Warm White 3100K, Natural White 4100K, Cool White 6300K, Amber, Red, Blue, Green, Yellow and RGB
Lighting LevelsMedium Output - 120 lumens per foot, High Output – 200 lumens per foot and special output levels available on request
Mounting Optionsadjustable bracket, inline cap, embed, fascia mount
Finish#4, #6, #8 mirror polish, powder coat, anodize
pg. 33www.ETI-S3.com
42”
4”
33-1/2”
3-1/8”
48” max.
handrail support end cap
standard embed mount
LEDRail™(optional)
Ø 0.5”picket
optional sidemount rail
Ø 1.90” post
Ø 1.67” cap
Ø 1.33” tube
34”
Vertical Inline Picket Design
Model Name: MARIDA
This design incorporates multiple vertical rods as the in ll between posts, creating the classic picket appearance. In ll is available in 3/8” to 9/16” thickness, and in solid or hollow material. It is available for illuminated and non-illuminated applications. A variety of mounting options can be used, including embed, fascia, and base plates. This design comes in stainless steel alloy 316 standard, as well as aluminum, brass, bronze and stainless steel alloy 304. A number of nishes can be accommodated to t the style of your needs.
ApplicationFree Standing
Post Materialstainless steel, aluminum, brass, bronze
Handrail Materialstainless steel, aluminum, brass, bronze
Cap Rail Materialstainless steel, aluminum, brass, bronze, wood
Options
illuminated LEDRail, curved or spiral, non-illuminated handrail
Available LED ColorsWarm White 2700K, Warm White 3100K, Natural White 4100K, Cool White 6300K, Amber, Red, Blue, Green, Yellow and RGB
Lighting LevelsMedium Output - 120 lumens per foot, High Output – 200 lumens per foot and special output levels available on request
Mounting Optionsadjustable bracket, inline cap, embed, fascia mount
Finish#4, #6, #8 mirror polish, powder coat, anodize
pg. 35www.ETI-S3.com
glass clamp
3/8” temp. glassoption:1/2” glass avail.
continuous Ø 0.6 rod
LEDRail™(optional)
42”
48” max.standard embed mount
3”
Ø 1.90” post
optional sidemount rail
34”
handrail support top railØ 1.67”, Ø 1.90“ or Ø 2-1/2”
2-1/2”
20-1/2”
Continuous Rod Glass Retainer Design
Model Name: YOSHI
This extremely unique design incorporates the standard dual glass retainer with dual continuous horizontal rods the length of a span. It is available for illuminated and non-illuminated applications. A variety of mounting options can be used, including embed, fascia, and base plates. This design comes in stainless steel alloy 316 standard, as well as aluminum, brass, bronze and stainless steel alloy 304. A number of nishes can be accommodated to t the style of your needs. Glass can be etched with a company logo as well.
ApplicationFree Standing
Post Materialstainless steel, aluminum, brass, bronze
Handrail Materialstainless steel, aluminum, brass, bronze
Cap Rail Materialstainless steel, aluminum, brass, bronze, wood
Options
illuminated LEDRail, curved or spiral, non-illuminated handrail
Available LED ColorsWarm White 2700K, Warm White 3100K, Natural White 4100K, Cool White 6300K, Amber, Red, Blue, Green, Yellow and RGB
Lighting LevelsMedium Output - 120 lumens per foot, High Output – 200 lumens per foot and special output levels available on request
Mounting Optionsadjustable bracket, inline cap, tempered glass, laminated glass, etching, embed, fascia mount
Finish#4, #6, #8 mirror polish, powder coat, anodize
pg. 37www.ETI-S3.com
rendering for display purposes only
pg. 38 www.ETI-S3.com proudly made in the USAGlass Clamp Two Line Rod Design
42”
27”
3”
48” max.
3/8” tempered glass
continuous Ø 0.6 rod handrail support Ø 1.67 cap rail
standard embed mount
glass clampfitting (typ.)
rod holder (typ.)
LEDRail™(optional)
optional sidemount rail
6”
4”
15”
9”
Glass Clamp Two Line Rod Design
Model Name: MIYOKO
As one of Ef cient-Tec’s most unique designs, this combines the classic glass clamp along with a double horizontal rod top in ll. It is available for illuminated and non-illuminated applications. A variety of mounting options can be used, including embed, fascia, and base plates. This design comes in stainless steel alloy 316 standard, as well as aluminum, brass, bronze and stainless steel alloy 304. A number of nishes can be accommodated to t the style of your needs. Glass can be etched with a company logo as well.
ApplicationFree Standing
Post Materialstainless steel, aluminum, brass, bronze
Handrail Materialstainless steel, aluminum, brass, bronze
Cap Rail Materialstainless steel, aluminum, brass, bronze, wood
Options
illuminated LEDRail, curved or spiral, non-illuminated handrail
Available LED ColorsWarm White 2700K, Warm White 3100K, Natural White 4100K, Cool White 6300K, Amber, Red, Blue, Green, Yellow and RGB
Lighting LevelsMedium Output - 120 lumens per foot, High Output – 200 lumens per foot and special output levels available on request
Mounting Optionsadjustable bracket, inline cap, tempered glass, laminated glass, etching, embed, fascia mount
Finish#4, #6, #8 mirror polish, powder coat, anodize
pg. 39www.ETI-S3.com
42”
aluminum doubleflat bar post
3/8” cleartempered glass
Ø 1.67 handrail Ø 1.67 handrailhorizontaloffset cap
48” max.24” nom.
20 1/2”
6 1/4”
1 15/16”
4 13/16”
7 7/16”
3”
LEDRail™(optional)
button glassholder
aluminum postdouble flatbar 2” x 3/8”
3/8” tempered glass
fascia mount bracket 4.72” sq.
fascia mount
Double Flat Bar Button Design
Model Name: AYAKI
This unique design employs a double at bar post and button mounts for the glass in ll panels in .375” or .500” thickness. It is available for illuminated and non-illuminated applications. A variety of mounting options can be used, including embed, fascia, and base plates. This design comes in stainless steel alloy 316 standard, as well as aluminum, brass, bronze and stainless steel alloy 304. A number of nishes can be accommodated to t the style of your needs. Glass can be etched with a company logo as well.
ApplicationFree Standing
Post Materialstainless steel, aluminum
Handrail Materialstainless steel, aluminum, brass, bronze
Options
illuminated LEDRail, curved or spiral, non-illuminated handrail
Available LED ColorsWarm White 2700K, Warm White 3100K, Natural White 4100K, Cool White 6300K, Amber, Red, Blue, Green, Yellow and RGB
Lighting LevelsMedium Output - 120 lumens per foot, High Output – 200 lumens per foot and special output levels available on request
Mounting Optionsinline cap, Angle Cap, Offset Cap, tempered glass, laminated glass, etching, embed, fascia mount
Finish#4, #6, #8 mirror polish, powder coat, anodize
pg. 41www.ETI-S3.com
42”
Ø 1.67 handrail
aluminum doubleflat bar post
3/8” cleartempered glass
48” max. fascia mount
glass clamp
20 1/2”
6 1/4”
4 13/16”
7 7/16”
3”
3/8” tempered glass
fascia mount bracket 4.72” sq.
aluminum postdouble flatbar 2” x 3/8”
LEDRail™(optional)
Double Flat Bar Glass Clamp Design
Model Name: ANGELITA
This model uses the classic glass clamp system along with the hi-tech look of a double at bar design to hold the glass in ll panels in .375” or .500” thickness. It is available for illuminated and non-illuminated applications. A variety of mounting options can be used, including embed, fascia, and base plates. This design comes in stainless steel alloy 316 standard, as well as aluminum, brass, bronze and stainless steel alloy 304. A number of nishes can be accommodated to t the style of your needs.
ApplicationFree Standing
Post Materialstainless steel, aluminum
Handrail Materialstainless steel, aluminum, brass, bronze
Options
illuminated LEDRail, curved or spiral, non-illuminated handrail
Available LED ColorsWarm White 2700K, Warm White 3100K, Natural White 4100K, Cool White 6300K, Amber, Red, Blue, Green, Yellow and RGB
Lighting LevelsMedium Output - 120 lumens per foot, High Output – 200 lumens per foot and special output levels available on request
Mounting Optionsinline cap, angle cap, offset cap, tempered glass, laminated glass, etching, embed, fascia mount
Finish#4, #6, #8 mirror polish, powder coat, anodize
pg. 43www.ETI-S3.com
42”
48” max.
4” (typ.)
13/16”
2-1/4
3-1/8”
aluminum doubleflat bar post Ø 0.472 rod (typ.)
Ø 1.67 angle offset cap rail
fascia mount
Ø 0.87 rod holder
fascia mount bracket 4.72” sq.
aluminum postdouble flatbar 2” x 3/8”
LEDRail™(optional)
Double Flat Bar Horizontal Rod Design
Model Name: TATIANA
This double at bar horizontal rail application is accented by multiple horizontal solid rods as the in ll between posts. It is available for illuminated and non-illuminated applications. Handrail can be offset horizontally or at an angle. A variety of mounting options can be used, including embed, fascia, and base plates. This design comes in stainless steel alloy 316 standard, as well as aluminum, brass, bronze and stainless steel alloy 304. A number of nishes can be accommodated to t the style of your needs.
ApplicationFree Standing,
Post Materialstainless steel, aluminum
Handrail Materialstainless steel, aluminum, brass, bronze
Options
illuminated LEDRail, curved or spiral, non-illuminated handrail
Available LED ColorsWarm White 2700K, Warm White 3100K, Natural White 4100K, Cool White 6300K, Amber, Red, Blue, Green, Yellow and RGB
Lighting LevelsMedium Output - 120 lumens per foot, High Output – 200 lumens per foot and special output levels available on request
Mounting Optionsinline cap, angle cap, offset cap, tempered glass , embed, fascia mount
Finish#4, #6, #8 mirror polish, powder coat, anodize
pg. 45www.ETI-S3.com
42”
Ø 1.67 caprail
aluminum doubleflat bar post
3/8” cleartempered glass
48” max.
20 1/2”
6 1/4”
4 13/16”
7 7/16”
3”
LEDRail™(optional)
1 1/2”
inline panelretainer
fascia mount bracket 4.72” sq.
3/8” tempered glass
fascia mount
Double Flat bar Inline Retainer Design
Model Name: CARIENNE
This model uses the inline retainer glass button system along with the hi-tech look of a double at bar design to hold the glass in ll panels in .375” or .500” thickness. It also comes with the option of an offset handrail, top or side mount, and either horizontally or at an angle. It is available for illuminated and non-illuminated applications. A variety of mounting options can be used, including embed, fascia, and base plates. This design comes in stainless steel alloy 316 standard, as well as aluminum, brass, bronze and stainless steel alloy 304. A number of nishes can be accommodated to t the style of your needs. Glass can be etched with a company logo as well.
ApplicationFree Standing
Post Materialstainless steel, aluminum
Handrail Materialstainless steel, aluminum, brass, bronze
Options
illuminated LEDRail, curved or spiral, non-illuminated handrail
Available LED ColorsWarm White 2700K, Warm White 3100K, Natural White 4100K, Cool White 6300K, Amber, Red, Blue, Green, Yellow and RGB
Lighting LevelsMedium Output - 120 lumens per foot, High Output – 200 lumens per foot and special output levels available on request
Mounting Optionsinline cap, angle cap, offset cap, tempered glass, laminated glass, etching, embed, fascia mount
Finish#4, #6, #8 mirror polish, powder coat, anodize
pg. 47www.ETI-S3.com
42”
34”
concrete mounting
60” max.
handrail support side mount handrailØ 1.67 caprail
1/2” tempered glassaluminum base shoe
optional sidemount rail
optional Ø 1.90” caprailother sizes available
LEDRail™(optional)
handrail bracket
concrete12” concrete anchor
finished floor
option:metal cladding
Structural Glass Rail Design
Model Name: SOPHELLE
Structural glass is all the rage, and this system is the most unique on the market. It is available for illuminated and non-illuminated applications. Fascia, surface, and embed are available for mounting options. Optional handrail can be used. This design comes in stainless steel alloy 316 standard, as well as aluminum, brass, bronze and stainless steel alloy 304. A number of nishes can be accommodated to t the style of your needs. Glass can be etched with a company logo as well. When incorporating etched glass logos and bottom lighting, nothing is as spectacular to the eye as this system.
ApplicationFree Standing
Post Materialstainless steel, aluminum, brass, bronze
Handrail Materialstainless steel, aluminum, brass, bronze
Cap Rail Materialstainless steel, aluminum, brass, bronze, wood
Options
illuminated LEDRail, curved or spiral, non-illuminated handrail
Available LED ColorsWarm White 2700K, Warm White 3100K, Natural White 4100K, Cool White 6300K, Amber, Red, Blue, Green, Yellow and RGB
Lighting LevelsMedium Output - 120 lumens per foot, High Output – 200 lumens per foot and special output levels available on request
Mounting Optionsadjustable bracket, tempered glass, laminated glass, etching, fascia mount
Finish#4, #6, #8 mirror polish, powder coat, anodize
pg. 49www.ETI-S3.com
postflat bar 2.0” x 1.0”
1.0”
7.2”
1.0”
2.0”
5.1”
custom hanrail support
Ø 0.6”
plate4.7” x 4.7”0.5” thickwith (4) holes
set screw
custom flat connection
section
base plate
side front
3.1”
3.1”4.7”
4.7”
10.0”
37.9
Single Flat Bar Inline Retainer Design
Model Name: CELIA
This model uses the inline retainer glass button system along with the slim look of a single at bar design to hold the glass in ll panels in .375” or .500” thickness. It also comes with the option of an offset handrail, top or side mount, and either horizontally or at an angle. It is available for illuminated and non-illuminated applications. A variety of mounting options can be used, including embed, fascia, and base plates. This design comes in stainless steel alloy 316 standard, as well as aluminum, brass, bronze and stainless steel alloy 304. A number of nishes can be accommodated to t the style of your needs. Glass can be etched with a company logo as well.
ApplicationFree Standing
Post Materialstainless steel, aluminum
Handrail Materialstainless steel, aluminum, brass, bronze
Options
illuminated LEDRail, curved or spiral, non-illuminated handrail
Available LED ColorsWarm White 2700K, Warm White 3100K, Natural White 4100K, Cool White 6300K, Amber, Red, Blue, Green, Yellow and RGB
Lighting LevelsMedium Output - 120 lumens per foot, High Output – 200 lumens per foot and special output levels available on request
Mounting Optionsinline cap, angle cap, offset cap, tempered glass, laminated glass, etching, embed, fascia mount
Finish#4, #6, #8 mirror polish, powder coat, anodize
pg. 51www.ETI-S3.com
42”
34”
30” max. stainless steelstandoff
1/2” cleartempered glass
handrail bracket
Ø 1.67 handrail
stair mounting
LEDRail™(optional)
5/8” x 3“ x 9” steelmounting platewelded to stringer
stainless steelcover plate 14ga.
2 7/8”
6”
3/4” (5/8” min.)
Boss Mount Rail Design
Model Name: BOSS RAIL
The most effective way mount structural glass to a stair stringer is the BOSS Rail system. Mounting buttons come in a variety of sizes for any thickness of glass. Optional glass mount handrail is available for this model. It is available for illuminated and non-illuminated applications for the optional handrail. This design comes in stainless steel alloy 316 standard, as well as aluminum, brass, bronze and stainless steel alloy 304. A number of nishes can be accommodated to t the style of your needs. Glass can be etched with a company logo as well.
ApplicationBoss Mount
Handrail Materialstainless steel, aluminum, brass, bronze
Cap Rail Materialstainless steel, aluminum, brass, bronze, wood
Options
illuminated LEDRail, curved or spiral, non-illuminated handrail
Available LED ColorsWarm White 2700K, Warm White 3100K, Natural White 4100K, Cool White 6300K, Amber, Red, Blue, Green, Yellow and RGB
Lighting LevelsMedium Output - 120 lumens per foot, High Output – 200 lumens per foot and special output levels available on request
Mounting Optionsadjustable bracket, inline cap, tempered glass, laminated glass, etching, fascia mount
Finish#4, #6, #8 mirror polish, powder coat, anodize
pg. 53www.ETI-S3.com
42”
48” max.
Ø 2” sch. 40 cap
Ø 1/4” 7 x 7wire rope
end cap
option:Ø 1.5” sch. 40side mount rail
2-1/2” x 1/2“flatbar post
3/8” x Ø 6”escutcheon pl.
34”
4”
4” (typ.)
standard embed mount
Heavy Duty Double Flat Bar Design
Model Name: HERCULES
Speci cally designed for heavy duty applications, the Hercules is a marvel. Incorporating 2.5” x .500” thick double at bars, along with all welded joints, and oversized cap rail, make this the absolute titan of the industry. In ll is .250”-.500” braided stainless steel cabling with swaged tensioning ends. It is available for illuminated and non-illuminated applications. Embed mounting is advised. This design comes in stainless steel alloys 304 and 316 with a #4 or #6 nish.
ApplicationWall Mount,Free Standing,
Post Materialstainless steel
Handrail Materialstainless steel, aluminum, brass, bronze
Cap Rail Materialstainless steel, aluminum, brass, bronze, wood
Options
illuminated LEDRail, curved or spiral, non-illuminated handrail, standard bracket
Available LED ColorsWarm White 2700K, Warm White 3100K, Natural White 4100K, Cool White 6300K, Amber, Red, Blue, Green, Yellow and RGB
Lighting LevelsMedium Output - 120 lumens per foot, High Output – 200 lumens per foot and special output levels available on request
Mounting Optionsinline cap, embed
Finish#4, #6, #8 mirror polish, powder coat
pg. 55www.ETI-S3.com
acrylic lens
acrylic lens
actual size Ø 1.3 in
LED strip
decorative wood grain or color insert
wood grain & color insert options
wire thruway
alu. profile
Illuminationhigh output LED strip
Specifications24VDCdimmable329 lumens per foot (warm white)4.4 watt per/ft consumptioncolor: white
Custom Length Illuminated Closet Rails
Model Name: WARDROBE RADIANCE
This latest trend in architectural and interior design is the perfect answer for the distinguished wardrobe. Control can be done by a jamb switch on any closet door, a touchpad, or occupancy sensor. This aluminum rail design features both up-lighting and down-lighting to illuminate the entire closet. A choice of nishes and details can be accommodated to t the style of choice. High output LEDs emit over 300 lumens per foot at only 4.4 watts. 24V power supply and wall-mounting hardware are included.
ApplicationWall Mount
Options
LED IlluminationUp-lighting, down-lighting, or bothWarm white 3100°K, daylight 4100°K, red, blue, green, yellow and RGBHigh and medium output
FinishPowder coat or anodize
AccentsWood grain or color inserts
pg. 57www.ETI-S3.com
typical wall mounted canopy
1/2” glass canopy(color and vendor T.B.D.)
glass canopy / rodretainer
glass canopy / rodretainer
glass canopy / rodretainer
round wall bracket / rodconnector
wall bracket / glass canopyconnector
M12 threaded rod
insulated precastconcrete wall
Custom Glass Canopies
Model Name: GLASS CANOPIES
Ef cient-Tec International is a leader in design, engineering, and manufacturing of glass canopy systems. They are available in stainless steel alloys 304 and 316, as well as aluminum, brass, and bronze. A number of nishes can be accommodated to t the style of your needs. Glass is available in a number of sizes and can be etched as requested. Send us your speci cation, and we will design a custom application for you.
ApplicationWall Mount
Options
Mounting Optionsfascia mount
Finish#4, #6, #8 mirror polish, powder coat, anodize
pg. 59www.ETI-S3.com
Custom Post Lighting
Model Name: Post Lighting
New to the marketplace is Custom Post Lighting by Ef cient-Tec. These posts are a perfect way to illuminate any walkway with a guard rail or hand rail. The posts come in many designs, including vertical and horizontal louvers. Illumination is available in any color. This design comes in stainless steel alloy 316 standard, as well as aluminum, brass, bronze and stainless steel alloy 304. Custom styles and con gurations available
ApplicationFree Standing
Post Materialstainless steel, aluminum, brass, bronze
Options
Available LED ColorsWarm White 2700K, Warm White 3100K, Natural White 4100K, Cool White 6300K, Amber, Red, Blue, Green, Yellow and RGB
Lighting LevelsMedium Output - 120 lumens per foot, High Output – 200 lumens per foot and special output levels available on request
Mounting Optionsembed, fascia
Finish#4, #6, #8 mirror polish, powder coat, anodize
pg. 61www.ETI-S3.com
ETIs Dallas TX fabrication facility
ETI manufactures its handrail in its Dallas TX facility. Our operation can facilitate all of customers needs. Project management, engineers, cad designers, electrical techs, welders and nishers are all on hand to ensure the quality of the product. Our handrail systems are shipped as complete as possible assuring the easiest possible installation. The possibilities for our handrail solutions are almost limitless, we strive to exceed the expectations of our demanding clientele.
pg. 63www.ETI-S3.com
Flow Drilling and Flow Tapping
flow drilling bit tap
flowed cone
360° rotating tube clamp
In factory FLOW DRILLING
When the ow drill comes into contact with the material using high axial pressure and rotational speed, the heat generated by friction makes the material malleable enough to be formed and perforated.
The ow drill pushes into the heated surface wall. The displaced material forms a collar around the surface of the tubing exterior. The remaining material forms a cone inside the tubing. The ow drill process takes no longer to drill than a normal hole.
The resulting collar and cone can be up to three times the original material thickness. The diameter of the cone is precisely determined by the diameter of the ow drill tool. The process does not weaken the tubings internal structure.
The resulting cone is uncommonly strong and when ow tapped can provide high torque threaded surfaces with extremely high pull out strength characteristics. Once tubing is locked into place, it can be owed and tapped without extra setup.
Flow drilling creates a bushing in thin walled materials that can serve as a bearing sleeve for inserted parts. The cone shaped bushing can be tapped immediately after the bush is created with our post repositioning clamp. This process called ow tapping produces a tapped surface up to three times thicker than the original tubing wall.
S3 ow drilling can provide thin walled handrail tubing with a secure threaded anchoring point. This is ideal for posts and handrail when attaching handrail supports, glass clamps, rod and cable holders.
pg. 65www.ETI-S3.com
O er and Acceptance: Purchaser has o ered to purchase from E cient-Tec Interna onal, LLC (“Seller”) certain ligh ng products (“Goods”). Seller’s acceptance of this o er is expressly condi oned upon Purchaser’s assent to the terms and condi ons set forth herein. If terms are submi ed in response to a purchase order or other wri en or oral o er of the Purchaser to purchase the Goods, to the extent that there are any material di erences or addi ons in the terms contained in the Purchaser’s o er, the terms listed herein shall be considered a countero er to sell the Goods to Purchaser under the terms and condi ons herein contained. This Acknowledgment supersedes all previous quota ons and agreements rela ng to the Goods. Purchaser’s o er, Seller’s countero er (if any), and any acceptance there of shall be governed by the laws of the State of Texas. Any ac on, suit, or other legal proceeding which is commenced to resolve any ma er arising under or rela ng to any provision of this agreement shall be commenced and prosecuted only in a court located in Dallas County, Texas, and Buyer consents to the jurisdic on of such a court.
Delivery and Title: Except as may be otherwise speci ed by Seller, delivery will be FOB point of shipment. All shipping dates are es mated and under no circumstances does Seller guarantee date of shipment. Seller shall not be liable for any delay in delivery of any Goods or any other default due to occurrences or con ngencies, including, but not limited to, re, ood, embargo, strike, failure to secure materials or labor from usual sources of supply, governmental restric ons considered “force majeure”, delays occasioned by any subcontractors, acts of God, acts of governmental or military authori es, delay in transporta on, labor di cul es or any other circumstances beyond Seller’s control which shall prevent Seller from performing in the normal and usual course of it’s business.
Risk of loss and tle to all goods furnished by Seller shall pass directly to Buyer at the FOB point of shipment.
Warran es: There are no express warran es hereunder, except that all goods shall be furnished in accordance with the descrip on and speci ca ons furnished by seller subject to the standard manufacturing varia ons and prac ces of seller. All implied warran es (including, but not by way of limita on, implied warran es of merchantability and tness) are hereby excluded. Any outstanding invoice balances beyond the company’s payment terms will void all warran es. Any warranty shall expire twelve (12) months following the date of shipment of such products or parts to the purchaser. All warranty rights are valid to the original purchaser of the products or parts. All warran es are nontransferable to a third party.
CERTIFICATION OF INSTALLATION: A er site installa on of E cient-Tec Interna onal Stainless Steel Systems is completed by the installa on contractor, an authorized factory representa ve is required to cer fy the installa on prior to the warranty becoming e ec ve. The cer ca on process includes inspec on of the completed installa on for the quality of moun ng points, eld splices, electrical connec ons, and overall appearance. E cient-Tec Interna onal reserves the right to require addi onal work be preformed by the installa on contractor if the installa on is deemed to be less than the quality needed for cer ca on. In the event the quality of the installa on is not brought up to the necessary standard for cer ca on, the warranty shall be declared null and void.
Buyer’s Remedies: Claims respec ng the condi on of Goods or their non-compliance with speci ca ons must be made by Buyer promptly a er receipt of such Goods, and Seller must be given reasonable opportunity to inves gate. Buyer shall set aside and hold such Goods, without further processing or installa on, un l Seller advises Buyer regarding the disposi on to be made of it, which advice Seller hereby agrees to furnish within a reasonable me. Any transporta on charges involved in such disposi on shall be borne by Buyer. Seller’s liability for any breach of warranty with respect to goods shall be limited to replacement or repair of non-conforming goods, or, at seller’s op on, credit of the purchase price thereof. In no event shall seller be liable for any consequen al damages or claims for labor, processing or installa on by reason of any such breach or warranty. Buyer shall have no right to “cover” by procuring subs tute goods at the cost or expense of seller. Purchaser further agrees to indemnify and hold seller harmless from and against all losses, damages, obliga ons, liabili es, suits and causes of ac on arising from any breach of warranty under this sec on.
Any ac on for breach of this agreement arising out of the sale of Goods must be commenced within one year a er the cause of ac on has accrued, or shall therea er be forever barred.
Prices: Prices are those in e ect at the me of shipment. In the event of a published increase or reduc on in prices by Seller, the new price will become e ec ve immediately on the unshipped por on of the order at the me of the change. In no event, however, will a reduc on in price be retroac ve to shipments made prior to the date of the price change. Upon acceptance by Seller, Purchaser’s order will not therea er be subject to cancella on nor to deferment of deliveries without Seller’s wri en consent.
Taxes: Purchaser shall reimburse Seller for any sales, use, occupa on, excise, or other tax arising out of sales of products or services to the purchaser upon receipt of Seller’s invoice for the amount of the tax. At the op on of the Company, Purchaser shall provide Seller with a tax exemp on cer cate acceptable to the appropriate taxing authori es.
Terms of Payment: Payment terms are 30% payment due immediately with the seller’s submission of approval drawings. Another 30% will be due to seller immediately upon the purchase of material for the job. A nal 30% will be due prior to delivery of material to the job site. The last 10% will be due within 15 days of nal delivery. In the event of late payments or Seller’s insecurity with respect to Buyer’s credit standing, Seller in its sole discre on, may change its credit terms, terminate its obliga ons hereunder and/or requirement in advance of delivery. Pro rata payments shall become due as invoiced.
Technical Advice: It is expressly understood that any technical advice furnished by Seller with respect to the use of its goods or services is given without charge and that Seller assumes no obliga on or liability for advice given or results obtained, all such advice being given and accepted at Buyer’s risk.
Cancella on or Revisions: Any order may be canceled or revised by Buyer only upon wri en approval of Seller in its sole discre on, and upon payment of cancella on or revision charges speci ed in said approval which shall take into account expenses previously incurred, commitments made by or in reliance upon such order, whether or not such commitments are legally binding on Seller and any other factors considered relevant by Seller.
Limita on on Liabili es: The sole and exclusive remedies of the Purchaser shall be those speci cally set forth above. Seller’s maximum liability for any and all claims arising directly or indirectly from the performance of its obliga ons hereunder, whether resul ng from Seller’s negligence or otherwise, shall not in the aggregate exceed the purchase price of the Goods. Under no circumstances shall Seller be liable to the purchaser or any third party for loss of business or pro t or any other economic loss, or any incidental indirect, special or consequen al damages.
Li ga on: If Seller prevails in a lawsuit or other ac on arising out of or related to this sale, the purchased products or services, this agreement, or breach of this agreement, Seller will be en tled to recover its reasonable a orney’s fees and costs of suit. Costs include fees for consulta ons and tes mony from experts such as appraisers and engineers. If Seller is required to ini ate or defend against li ga on with a third party because of the viola on by Purchaser of any term or provision of this agreement, or obliga on of Purchaser, Seller will be en tled to recover reasonable a orneys fees and costs from Purchaser. A orney’s fees will include those incurred on appeal.
Non-waiver by Seller: Waiver by Seller of a breach of any of the terms and condi ons of any contract shall not be construed as a waiver of any other breach.
standard terms and condi ons of sale for Stainless Steel Systems
pg. 66 www.ETI-S3.com proudly made in the USATerms and Conditions
Additional catalogs from Solavanti Lighting LLCavailable in print and online.
PERFORMANCE LED lighting
www.solavantilighting.com
PERFORMANCE Lichtkanal(Light Channel)
www.solavantilighting.com
PERFORMANCE PL Lighting
www.solavantilighting.com
DESIGN Lighting
www.solavantilighting.com
ETI Stainless SteelHandrail Systems
www.ETI-S3.com
ETI ProfessionalLED Lighting 2012
www.efficient-tec.com
e
ETI ProfessionalLED Lighting
www.efficient-tec.com
OEM LED Lightingand Components
www.OEMLED.com
PERFORMANCE Lighting
www.solavantilighting.com
Additional catalogs from Efficient-Tec International LLCavailable in print and online.
Efficient-Tec International LLC.
L I CH T K ANAL
The generosity of light
D E S I G N
Efficient-Tec International LLCStep and Aisle Lighting Light Strips Linear Flex Cove Lighting Modules Wall Washers LED Flood Strips LFS Neon Flex Rope Lighting LED Plots
pg. 67www.ETI-S3.comcatalog selection available online pg. 67www.ETI-S3.com pg. 67www.ETI-S3.com