egant multi operator combiners
TRANSCRIPT
-
Multi Operator Combiner2 xCDMA800/GSM900, 4 x GSM1800, 4 x UMTS4 Antenna Ports
Combines up to 10 RBSs into 4 antenna ports
This Multi Operator Combiner enables up to 10 Radio Base Stations to connect to the combiner:
2 CDMA800/GSM900 Radio Base Stations4 GSM1800 Radio Base Stations4 UMTS Radio Base Stations
The combiner combines the signals to the4 antenna ports, or splits the signal to the 10 RBSs in the receiving direction. This is a highly important function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
Save money by installing our Multi Operator Combiner
By utilizing the Egant Multi Operator Com-biner you will reduce the cost of antennas, feeders and installation. It eliminates the cost ineffi cient need to make one antenna instal-lation for each system. By simply connecting the RBSs into the combiner it will immedi-ately render you all the benefi ts of antenna sharing.
EGANTCELLULAR COMPONENTS
-
Egant Cellular ComponentsBox 945SE-114 79 StockholmSwedenPhone: +46 (0)8 620 06 50Fax: +46 (0)70 386 53 53E-mail: [email protected]
Technical Specifi cations for the Multi Operator CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number:Passband:Port 1: CDMA800/GSM900Port 2: CDMA800/GSM900
Port 3: GSM1800Port 4: GSM1800Port 5: GSM1800Port 6: GSM1800Port 7: UMTSPort 8: UMTS Port 9: UMTSPort 10: UMTS
Insertion loss:Port 1 - 2: CDMA800 - ANT 1 - 4Port 3 - 6: GSM1800 - ANT 1 - 4Port 7 - 10: UMTS - ANT 1 - 4
Coupling:Port 1 - 2: CDMA800 - ANT 1 - 4Port 3 - 6: GSM1800 - ANT 1 - 4Port 7 - 10: UMTS - ANT 1 - 4
Input return loss:Isolation between systems:Isolation between same systems:Intermodulation 2 x 43 dBm:
Max input power/port:Impedance in/out:
EG 601 0074
806 - 960 MHz806 - 960 MHz
1710 - 1880 MHz1710 - 1880 MHz1710 - 1880 MHz1710 - 1880 MHz 1920 - 2170 MHz1920 - 2170 MHz 1920 - 2170 MHz1920 - 2170 MHz
< 1.2 dB< 1.2 dB< 1.2 dB
6.0 dB +/- 0.6 dB6.0 dB +/- 0.6 dB6.0 dB +/- 0.6 dB
> 18.0 dB> 50 dB> 25 dB< 117 dBm (160 dBc)
60 W50 Ohm
EG 601 0075
806 - 960 MHz806 - 960 MHz
1710 - 1880 MHz1710 - 1880 MHz1710 - 1880 MHz1710 - 1880 MHz 1920 - 2170 MHz1920 - 2170 MHz 1920 - 2170 MHz1920 - 2170 MHz
< 1.2 dB< 1.2 dB< 1.2 dB
6.0 dB +/- 0.6 dB6.0 dB +/- 0.6 dB6.0 dB +/- 0.6 dB
> 18.0 dB> 50 dB> 25 dB< 117 dBm (160 dBc)
60 W50 Ohm
Mechanical Specifi cationsDimensions (W x H x D):Input connectors:Output connectors:Weight:
450 x 250 x 500 mm7/16 (f)N(f)19 kg
450 x 250 x 500 mmN (f)N(f)19 kg
Environmental Specifi cationsTemp. range (normal operation):Humidity:
Egant reserves the right to change this product specifi cation at any time without notice.
-30 to +70 CRelative 5 - 100%
-30 to +70 CRelative 5 - 100%
RevA
-
GSM
900
GSM
900
ANT1ANT1
GSM
900
GSM
900
GSM
180
0G
SM 1
800
GSM
180
0G
SM 1
800
UM
TSU
MTS
UM
TSU
MTS
ANT2ANT2
GSM
900
GSM
900
ANT1ANT1
GSM
900
GSM
900
GSM
180
0G
SM 1
800
GSM
180
0G
SM 1
800
UM
TSU
MTS
UM
TSU
MTS
ANT2ANT2
Multi Operator Combiner2 x GSM900, GSM1800, UMTS6 Inputs to 2 Antenna Ports
Combines 6 RBSs into 2 antenna ports
This Multi Operator Combiner enables 6 Ra-dio Base Stations to connect to the combiner:
2 GSM900 Radio Base Stations2 GSM1800 Radio Base Stations2 UMTS Radio Base Stations
The combiner combines the 6 signals to the2 antenna ports, or splits the signal to the 6 RBSs in the receiving direction. This is a highly desirable function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
Save money by installing our Multi Operator Combiner
By utilizing our Multi Operator Combiner you will reduce the cost of antennas, feeders and installation. It eliminates the cost inef-fi cient need to make one antenna installation for each system. By simply connecting the RBSs into the combiner it will immediately render you all the benefi ts of antenna sharing.
EGANTCELLULAR COMPONENTS
-
Egant Cellular ComponentsBox 945SE-114 79 StockholmSwedenPhone: +46 (0)8 620 06 50Fax: +46 (0)70 386 53 53E-mail: [email protected]
RevB
Technical Specifi cations for the Multi Operator CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number:Passband:Port1 GSM900:Port2 GSM900:Port3 GSM1800:Port4 GSM1800:Port5 UMTS:Port6 UMTS:
Insertion loss:Port 1 + 2 GSM900 - ANT 1 + 2:Port 3 + 4 GSM1800 - ANT 1 + 2:Port 5 + 6 UMTS - ANT 1 + 2:
EG 100 4201
806 - 960 MHz806 - 960 MHz1710 - 1880 MHz1710 - 1880 MHz1920 - 2170 MHz1920 - 2170 MHz
< 4.0 dB (3.3 dB typ)< 4.0 dB (3.4 dB typ)< 4.0 dB (3.5 dB typ)
Input return loss:Isolation between systems:Isolation between same systems:Intermodulation 2 x 43 dBm:
Max input power/port:Impedance in/out:
Mechanical Specifi cationsDimensions (W x H x D):Connectors:Weight:
> 20.0 dB> 50 dB> 25 dB< 117 dBm (160 dBc)
60 W50 Ohm
350 x 400 x 220 mm7/16 (f)12 kg
Environmental Specifi cationsTemp. range (normal operation):Humidity:
Egant reserves the right to change this product specifi cation at any time without notice.
-30 to +70 CRelative 5 - 100%
-
EGANTCELLULAR COMPONENTS
EGANT CELLULAR COMPONENTS
Multi Operator Combiner3xUMTS, 2xGSM1800, 2xGSM9007 Inputs to 4 Antenna Port
Combines 7 RBSs into 4 Antenna-port.The Multi Operator Combiner allows you toconnect up to 8 Radio Base Stations to the Com-biner.3 UMTS Radio Base Stations2 GSM1800 Radio Base Stations2 GSM900 Radio Base StationsThe Combiner combines the 7 signals to the4-Antenna ports or in the receiving waysplits the signal to the 7 RBSs.This is a extremely important function whenyou are designing shared antenna systemsand like to connect multiple RBSs to thesame antennas.
Preliminary
-
Egant Cellular ComponentsBox 945SE-114 79 StockholmSwedenPhone:+46 (0)8 620 06 50Fax: +46 (0)70 386 53 53E-mail: [email protected]
Technical Specifi cations for the Multi Operator CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number:PassbandPort 1 GSM900:Port 2 GSM900:Port 3 UMTS:Port 4 UMTS:Port 5 UMTS:Port 6 GSM1800:Port 7 GSM1800:
Insertion loss:Port 1 - 7 to ANT:
Input return loss:Isolation between systems:Isolation between same systems:Intermodulation 2 x 43dBm:
Max input power/port:Impedance in/out:
EG 601 0055
806 - 960MHz806 - 960MHz1920 - 2170MHz1920 - 2170MHz1920 - 2170MHz1710 - 1880MHz1710 - 1880MHz
< 7,5 dB (6,5 typ.)
> 18.0 dB> 50 dB> 25 dB< 117 dBm (160dBc)
60 W50 Ohm
Mechanical Specifi cationsDimensions (W x H x D):Connectors:Weight:
300 x 400 x 180 mm7/16 (f)16 kg
Environmental Specifi cationsTemp. range (normal operation):Humidity:
-30 to +70 CRelative 5 - 100%
Preliminary RevB
-
EGANTCELLULAR COMPONENTS
EGANT CELLULAR COMPONENTS
Multi Operator Combiner3xUMTS, 3xGSM1800, 2xGSM9008 Inputs to 1 Antenna Port
Combines 8 RBSs into 1 Antenna-port.The Multi Operator Combiner allows you toconnect up to 8 Radio Base Stations to the Com-biner.4 UMTS Radio Base Stations4 GSM1800 Radio Base Stations2 GSM900 Radio Base StationsThe Combiner combines the 8 signals to the1-Antenna port or in the receiving waysplits the signal to the 8 RBSs.This is a extremely important function whenyou are designing shared antenna systemsand like to connect multiple RBSs to thesame antennas.
ANTANT
GSM
900
GSM
900
GSM
900
GSM
900
GSM
180
0G
SM 1
800
GSM
180
0G
SM 1
800
GSM
180
0G
SM 1
800
UM
TSU
MTS
UM
TSU
MTS
UM
TSU
MTS
-
Egant Cellular ComponentsBox 945SE-114 79 StockholmSwedenPhone:+46 (0)8 62 00 650Fax: +46 (0)70 386 53 53E-mail: [email protected]
Technical Specifi cations for the Multi Operator CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number:PassbandPort1: GSM900Port2: GSM900Port3: UMTSPort4: UMTSPort5: UMTSPort6: GSM1800Port7: GSM1800Port8: GSM1800
InsertionlossPort1-8 - ANT
Input return loss:Isolation between Systems:Isolation between same Systems:Intermodulation 2x43dBm
Max input power/port:Impedance in/out:
EG 601 0034
806 - 960MHz806 - 960MHz1920 2170MHz1920 2170MHz1920 2170MHz1710 1880MHz1710 1880MHz1710 1880MHz
< 5.5 dB
> 18.0 dB> 50 dB> 25 dB< 117 dBm (160dBc)
60 W50 Ohm
Mechanical Specifi cationsDimensions (WxHxD):Connectors:Weight:
300 x 400 x 180 mm7/16 (f)16 kg
Environmental Specifi cationsTemp. range (normal operation):Humidity:
- 30 to + 70 CRelative 5 - 100%
Preliminary
-
Multi Operator Combiner2x TETRA/CDMA, 1x GSM900, 3xGSM1800, 2xUMTS8 Ports In - 4 Ports Out
Combines 12 RBSs into 4 antenna ports
This Multi Operator Combiner enables 12 Ra-dio Base Stations to connect to the combiner:
2 TETRA/CDMA1 GSM900 / CDMA Radio Base Stations3 GSM1800 Radio Base Stations2 UMTS Radio Base Stations
The combiner combines the 8 signals to the4 antenna ports, or splits the signal to the 8 RBSs in the receiving direction. This is a highly important function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
Save money by installing our Multi Operator Combiner
By utilizing our Multi Operator Combiner you will reduce the cost of antennas, feeders and installation. It eliminates the cost inef-fi cient need to make one antenna installation for each system. By simply connecting the RBSs into the combiner it will immediately render you all the benefi ts of antenna sharing.
EGANTCELLULAR COMPONENTS
-
EGANT CELLULAR COMPONENTS
Multi Operator Combiner1 x 380 - 520MHz4 x 800 - 2200 MHz4 x Antenna Ports5 Inputs to 4 Antenna Ports
Combines up to 5 RBSs into 4 antenna ports
The Multi Operator Combiner enables a maximumof Radio Base Stations to connect to the combiner:
1 TETRA Radio Base Station4 Cellular Radio Base Station
The combiner combines the TETRA and 800 - 2200MHz signals to the 4 antenna ports or splits the signal in the receiving direction. This is a very important function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
Save money by installing our Multi Operator CombinerBy utilizing our Multi Operator Combiner you will reduce the cost of antennas, feeders and installation. It eliminates the cost inef-fi cient need to make one antenna installation for each system. By simply connecting the RBSs into the combiner it will render you all the benefi ts of antenna sharing.
EGANTCELLULAR COMPONENTS
-
Egant Cellular ComponentsBox 945SE-114 79 StockholmSwedenPhone: +46 (0)8 620 06 50Fax: +46 (0)70 386 53 53E-mail: [email protected]
Technical Specifi cations for th e Multi Operator CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number:Passband:Port 1 :Port 2:Port 3:Port 4:Port 5:
Insertion loss:Port 1 - 5: ANT 1 - ANT 4:
Coupling:Port 1 - 5: ANT 1 - ANT 4:
Input return loss:Isolation between systems:Isolation between same systems:Intermodulation 2 x 43 dBm:
Max input power/port:
Impedance in/out:
EG 601 0095
380 - 520 MHz800 - 2200 MHz800 - 2200 MHz800 - 2200 MHz800 - 2200 MHz
< 1.2 dB
6.0 dB +/- 0.6dB
> 18.0 dB> 50 dB> 30 dB< 117 dBm (160 dBc) 60 W
50 Ohm
Mechanical Specifi cationsDimensions (W x H x D):Input connectors:Antenna connectors:Weight:
450 x 250 x 500 mmN (f)N(f)18 Kg
Environmental Specifi cationsTemp. range (normal operation):Humidity:Sealing:
Egant reserves the right to change this product specifi cation at any time without notice.
0 to +55 CRelative 5 - 95%Indoor use
Rev A
-
Egant Cellular ComponentsBox 945SE-114 79 StockholmSwedenPhone: +46 (0)8 620 06 50Fax: +46 (0)70 386 53 53E-mail: [email protected]
Technical Specifi cations for the Multi Operator CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number:Passband:Port 1 TETRA / CDMA:Port 2 TETRA / CDMA:Port 3 GSM900:Port 4 GSM1800:Port 5 GSM1800:Port 6 GSM1800:Port 7 UMTS:Port 8 UMTS:
Insertion loss:Port 1 - 2 TETRA / CDMA:Port 3 GSM900 - ANT 1 - 4:Port 4 - 6 GSM1800 - ANT 1 - 4:Port 7 - 8 UMTS - ANT 1 - 4:
Input return loss:Isolation between systems:Isolation between same systems:Intermodulation 2 x 43 dBm:
Max input power/port:Impedance in/out:
EG 601 0079
376 - 500 MHz376 - 500 MHz824 - 960 MHz1710 - 1880 MHz1710 - 1880 MHz1710 - 1880 MHz1920 - 2170 MHz 1920 - 2170 MHz
< 7.9 dB (7 dB typ)< 7.9 dB (7 dB typ)< 7.9 dB (7 dB typ)< 7.9 dB (7 dB typ)
> 16.0 dB> 35 dB> 25 dB< 117 dBm (160 dBc)
20 W50 Ohm
Mechanical Specifi cationsDimensions (W x H x D):Connectors:Weight:
494 x 214 x 500 mm7/16 (f)24 kg
Environmental Specifi cationsTemp. range (normal operation):Humidity:
Egant reserves the right to change this product specifi cation at any time without notice.
-30 to +70 CRelative 5 - 100%
RevA
-
Multi Operator Combiner3 x 376 - 470MHz systems to1 Antenna port
EGANTCELLULAR COMPONENTS
Combine 3 RBSs into 1 Antenna.Do you have Radio Base Stations orRepeaters that you like to combine to the same antenna.Connect your RBSs to the 3-Way Combiner and it will give you an optimum combination with as less loss as possible.The combiner gives you an easy solution so you dont need to worry about isolation or intermodulation in your system.
-
Egant Cellular ComponentsBox 945SE-114 79 StockholmSwedenPhone: +46 (0)8 620 06 50Fax: +46 (0)70 386 53 53E-mail: [email protected]
Technical Specifi cations for the Multi Operator CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number:Passband:Port 1 :Port 2:Port 3:
Insertion loss:Port 1 - 3 to ANT 1
Input return loss:Isolation between same systems:
Max input power/port:Impedance in/out:
EG 601 0059
376 - 470 MHz376 - 470 MHz376 - 470 MHz
< 6.2 dB + 0,4 dB
> 18.0 dB> 25 dB (35dB typ)
60 W50 Ohm
Mechanical Specifi cationsDimensions 19 rack:Connectors:Weight:
3HE7/16 (f)5 kg
Environmental Specifi cationsTemp. range (normal operation):Humidity:
Egant reserves the right to change this product specifi cation at any time without notice.
-30 to +70 CRelative 5 - 100%
RevA
-
Multi Operator CombinerDVB-H, TETRA, GSM-R, GSM900GSM1800, UMTS6 Inputs to 2 Antenna Ports
Combines 6 RBSs into 2 antenna ports
This Multi Operator Combiner enables 3 RadioBase Stations to connect to the combiner:
1 DVB-H Radio Base Stations1 TETRA Radio Base Station1 GSM-R Radio Base Station1 GSM900 Radio Base Station1 GSM1800 Radio Base Station1 UMTS Radio Base Station
The combiner combines the 6 signals to the2 antenna ports, or splits the signal to the 6RBSs in the receiving direction. This is a highly important function when designing shared an-tenna systems wishing to connect multiple RBSs to the shared antennas.
EGANTCELLULAR COMPONENTS
Save money by installing our MultiOperator Combiner
By utilizing our Multi Operator Combineryou will reduce the cost of antennas, feedersand installation. It eliminates the cost ineffi -cient need to make one antenna installation foreach system. By simply connecting the RBSsinto the combiner it will immediately renderyou all the benefi ts of antenna sharing.
UM
TS
AN
T 1
AN
T 2
Prelim
inary
GS
M18
00
GS
M90
0
GS
M-R
DV
B-H
TETR
A
-
Egant Cellular ComponentsBox 945SE-114 79 StockholmSwedenPhone:+46 (0)8 620 06 50Fax: +46 (0)70 386 53 53E-mail: [email protected]
Technical Specifi cations for the Multi Operator CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number:Passband:Port 1 DVB-H:Port 2 GSM-R:Port 3 GSM900:Port 4 GSM1800:Port 5 UMTS:Port 6 TETRA:
Insertion loss: Port 1 to ANT 1 - 2: Port 2 to ANT 1 - 2: Port 3 to ANT 1 - 2: Port 4 to ANT 1 - 2: Port 5 to ANT 1 - 2: Port 6 to ANT 1 - 2:
Input return loss:
IsolationGSM900 GSM1800 UMTSGSM-R GSM1800 / UMTSGSM-R GSM900DVB-H GSM-R /GSM900 / GSM1800 / UMTS DVB-H TETRA
Max input power/port:Impedance in/out:
Antenna test ports Port 4, Ant 1 370 - 2170 MHz Port 5, Ant 2 370 - 2170 MHz
EG 601 0057
380 - 710 MHz876 - 925 MHz880 - 960 MHz1710 - 1880 MHz1920 - 2170 MHz370 - 400 MHz
< 5.0 dB (typ 4.0 dB)< 4.0 dB (typ 3.5 dB)< 4.5 dB (typ 4.0 dB)< 4.5 dB (typ 4.0 dB)< 4.5 dB (typ 4.0 dB)< 4.0 dB (typ 3.5 dB)
> 16.0 dB
> 50 dB> 70 dB> 25 dB> 40 dB> 22 dB
50 W50 Ohm
-30.0 dB + 1dB-30.0 dB + 1dB
Mechanical Specifi cationsDimensions (WxHxD):Connectors:Weight:
400 x 300 x 120 mm7/16 (f)11 kg
Environmental Specifi cationsTemp. range (normal operation):Humidity:
Egant reserves the right to change this product specifi cation at any time
without notice.
-30 to +70 CRelative 5 - 100%
RevA
-
EGANT CELLULAR COMPONENTS
Multi Operator Combiner4 x GSM900, GSM1800, UMTS1 x TETRA / PMR, FM 14 Inputs to 4 Antenna Ports
GSM
900
GSM
900
ANT2ANT2
GSM
900
GSM
900
ANT1ANT1
GSM
900
GSM
900
GSM
900
GSM
900
GSM
180
0G
SM 1
800
GSM
180
0G
SM 1
800
GSM
180
0G
SM 1
800
GSM
180
0G
SM 1
800
UM
TSU
MTS
UM
TSU
MTS
UM
TSU
MTS
UM
TSU
MTS
ANT3ANT3
ANT4ANT4G
SM 9
00G
SM 9
00ANT2ANT2
GSM
900
GSM
900
ANT1ANT1
GSM
900
GSM
900
GSM
900
GSM
900
GSM
180
0G
SM 1
800
GSM
180
0G
SM 1
800
GSM
180
0G
SM 1
800
GSM
180
0G
SM 1
800
UM
TSU
MTS
UM
TSU
MTS
UM
TSU
MTS
UM
TSU
MTS
ANT3ANT3
ANT4ANT4
Combines GSM900 / GSM1800 / UMTS / TETRA / FM into 4 antenna ports
The Multi Operator Combiner enables a maxi-mum of 14 Radio Base Stations to connect to the combiner:
4 GSM900 Radio Base Stations4 GSM1800 Radio Base Stations4 UMTS Radio Base Stations1 TETRA / PMR Radio Base Station1 FM Radio Base Station
The combiner combines the 14 signals to the4 antenna ports, or splits the signal to the 14 RBSs in the receiving direction. This is a very important function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
Save money by installing our Multi Operator Combiner
By utilizing our Multi Operator Combiner you will reduce the cost of antennas, feeders and installation. It eliminates the cost inef-fi cient need to make one antenna installation for each system. By simply connecting the RBSs into the combiner it will render you all the benefi ts of antenna sharing.
EGANTCELLULAR COMPONENTS
TETRA / PMR
FM
-
Egant Cellular ComponentsBox 945SE-114 79 StockholmSwedenPhone: +46 (0)8 620 06 50Fax: +46 (0)70 386 53 53E-mail: [email protected]
Technical Specifi cations for the Multi Operator CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number:Passband:Port 1 GSM900 - 1:Port 2 GSM900 - 2:Port 3 GSM900 - 3:Port 4 GSM900 - 4:Port 5 GSM1800 - 1:Port 6 GSM1800 - 2:Port 7 GSM1800 - 3:Port 8 GSM1800 - 4:Port 9 UMTS - 1:Port 10 UMTS - 2:Port 11 UMTS - 3:Port 12 UMTS - 4:Port 13 TETRA (option EG 601 0018):Port 14 FM (option EG 601 0018):
Insertion loss:Port 1 - 4 GSM900 - ANT 1 - 4:Port 5 - 8 GSM1800 - ANT 1 - 4:Port 9 - 12 UMTS - ANT 1 - 4:Port 13 TETRA - ANT 1 - 4:Port 14 FM - ANT 1 - 4:
Coupling (1 INPUT 4 - OUT):Port 1, 2, 5, 6, 11, 12 to ANT 1 - 4:Port 3, 7 to - ANT 3, 4:Port 3, 7 to - ANT 2 (option EG 601 0019):Port 4, 8 to - ANT 1, 2:Port 4, 8 to - ANT 3 (option EG 601 0019):Port 13 to ANT 1 - 4:Port 14 to ANT 1 - 4:
Input return loss:Isolation between systems:Isolation between same systems:Intermodulation 2 x 43 dBm:
Max input power/port:Impedance in/out:
EG 601 0017
806 - 960 MHz806 - 960 MHz806 - 960 MHz806 - 960 MHz 1710 -1880 MHz1710 - 1880 MHz1710 - 1880 MHz1710 - 1880 MHz 1920 - 2170 MHz1920 - 2170 MHz 1920 - 2170 MHz1920 - 2170 MHz376 - 500 MHz88 - 108 MHz
< 1.0 dB< 1.0 dB< 1.0 dB< 1.0 dB< 1.0 dB
6.0 dB +/- 0.5 dB6.0 dB +/- 0.5 dB30.0 dB +/- 0.5 dB6.0 dB +/- 0.5 dB30.0 dB +/- 0.5 dB6.0 dB +/- 0.5 dB6.0 dB +/- 0.5 dB
> 18.0 dB> 50 dB> 25 dB< 117 dBm (160 dBc)
60 W50 Ohm
Mechanical Specifi cationsDimensions (W x H x D):Connectors port 1 - 12:Connectors port 13, 14:Weight:
300 x 800 x 180 mm7/16 (f)N (f)28 kg
Environmental Specifi cationsTemp. range (normal operation):Humidity:
Egant reserves the right to change this product specifi cation at any time without notice.
-30 to +70 CRelative 5 - 100%
RevB
-
Multi Operator Combiner88 - 500MHz, GSM9005 Inputs - 4 Output
Connects GSM900 and 88-500MHz systems to 4 antenna ports
This Multi Operator Combiner enables the connec-tion of 5 RBSs/repeaters to the combiner.
The combiner combines the 5 signals to the 4antenna ports, or splits the signal to the 5 RBSs in the receiving way. This is a highly desirable func-tion when designing shared antenna systems wish-ing to connect multiple RBSs to the shared anten-nas.
Save money by installing our Multi Operator Combiner
By utilizing our Multi Operator Combiner you will reduce the cost of antennas, feeders and installation. It eliminates the cost inef-fi cient need to make one antenna installation for each system. By simply connecting the RBSs into the combiner it will immediately render you all the benefi ts of antenna sharing.
EGANTCELLULAR COMPONENTS
Port 5 GSM900
Feeder1
Feeder2
Feeder4
Feeder3
Port 1 88 - 500MHz890-960
88 - 500
Port 2 88 - 500MHz
Port 3 88 - 500MHz
Port 4 88 - 500MHz
890-960
88 - 500
890-960
88 - 500
890-960
88 - 500
Port 5 GSM900
Feeder1
Feeder2
Feeder4
Feeder3
Port 1 88 - 500MHz890-960
88 - 500
Port 2 88 - 500MHz
Port 3 88 - 500MHz
Port 4 88 - 500MHz
890-960
88 - 500
890-960
88 - 500
890-960
88 - 500
-
Egant Cellular ComponentsBox 945SE-114 79 StockholmSwedenPhone: +46 (0)8 620 06 50Fax: +46 (0)70 386 53 53E-mail: [email protected]
Technical Specifi cations for the Multi Operator CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number:Passband:Port 1 - 4:Port 5, GSM900:
Insertion loss:Port 1 to ANT 1:Port 2 to ANT 2:Port 3 to ANT 3:Port 4 to ANT 4:Port 5 to ANT 1-4:
Input return loss:Isolation between systems:
Max input power/port: Port 1-4: Port 5:
Impedance in/out:
EG 601 0061
88 - 500 MHz890 - 960 MHz
< 0.5 dB (0.25dB typ.)< 0.5 dB (0.25dB typ.)< 0.5 dB (0.25dB typ.)< 0.5 dB (0.25dB typ.)< 7.0 dB (6.4dB typ.)
> 16.0 dB> 50 dB
300W150W
50 Ohm
Mechanical Specifi cationsDimensions (W x H x D):Connectors:Weight:
250 x 150 x 250 mm7/16 (f)15 kg
Environmental Specifi cationsTemp. range (normal operation):Humidity:
Egant reserves the right to change this product specifi cation at any time without notice.
-30 to +70 CRelative 5 - 100%
RevA
-
Multi Operator CombinerPMR, TETRA, GSM-R3 Inputs to 2 Antenna Ports
Combines 3 RBSs into 2 antenna ports
This Multi Operator Combiner enables 3 RadioBase Stations to connect to the combiner:
1 PMR Radio Base Stations1 TETRA Radio Base Station1 GSM-R Radio Base Station
The combiner combines the 3 signals to the2 antenna ports, or splits the signal to the 3RBSs in the receiving direction. This is a highly important function when designing shared an-tenna systems wishing to connect multiple RBSs to the shared antennas.
EGANTCELLULAR COMPONENTS
Save money by installing our MultiOperator Combiner
By utilizing our Multi Operator Combineryou will reduce the cost of antennas, feedersand installation. It eliminates the cost ineffi -cient need to make one antenna installation foreach system. By simply connecting the RBSsinto the combiner it will immediately renderyou all the benefi ts of antenna sharing.
PM
R
TETR
A
GS
M-R
AN
T 1
AN
T 2
Prelim
inary
-
Egant Cellular ComponentsBox 945SE-114 79 StockholmSwedenPhone:+46 (0)8 620 06 50Fax: +46 (0)70 386 53 53E-mail: [email protected]
Technical Specifi cations for the Multi Operator CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number:Passband:Port 1 PMR:Port 2 TETRA:Port 3 GSM-R / GSM900:
Insertion loss: Port 1 - 2 to ANT 1 - 2: Port 3 to ANT 1 - 2:
Input return loss:
IsolationPort 1 to Port 2:Port 1+2 to Port 3:
Max input power/port:Impedance in/out:
Antenna test ports Port 4, Ant 1 370 - 960 MHz Port 5, Ant 2 370 - 960 MHz
EG 601 0056
50 - 470 MHz370 - 480 MHz870 - 960 MHz
< 4.0 dB (typ 3.3 dB)< 3.5 dB (typ 3.2 dB)
> 16.0 dB
> 25 dB> 50 dB
50 W50 Ohm
-30.0 dB + 1dB-30.0 dB + 1dB
Mechanical Specifi cationsDimensions (WxHxD):Connectors:Weight:
200 x 300 x 120 mm7/16 (f)6 kg
Environmental Specifi cationsTemp. range (normal operation):Humidity:
Egant reserves the right to change this product specifi cation at any time
without notice.
-30 to +70 CRelative 5 - 100%
RevA
-
EGANT CELLULAR COMPONENTS
Multi Operator Combiner4 x GSM900, GSM1800, UMTS12 Inputs to 4 Antenna Ports
GSM
900
GSM
900
ANT2ANT2
GSM
900
GSM
900
ANT1ANT1
GSM
900
GSM
900
GSM
900
GSM
900
GSM
180
0G
SM 1
800
GSM
180
0G
SM 1
800
GSM
180
0G
SM 1
800
GSM
180
0G
SM 1
800
UM
TSU
MTS
UM
TSU
MTS
UM
TSU
MTS
UM
TSU
MTS
ANT3ANT3
ANT4ANT4G
SM 9
00G
SM 9
00ANT2ANT2
GSM
900
GSM
900
ANT1ANT1
GSM
900
GSM
900
GSM
900
GSM
900
GSM
180
0G
SM 1
800
GSM
180
0G
SM 1
800
GSM
180
0G
SM 1
800
GSM
180
0G
SM 1
800
UM
TSU
MTS
UM
TSU
MTS
UM
TSU
MTS
UM
TSU
MTS
ANT3ANT3
ANT4ANT4
Combines GSM900 / GSM1800 / UMTSinto 4 antenna ports
The Multi Operator Combiner enables a maxi-mum of 12 Radio Base Stations to connect to the combiner:
4 GSM900 Radio Base Stations4 GSM1800 Radio Base Stations4 UMTS Radio Base Stations
The combiner combines the 12 signals to the4 antenna ports, or splits the signal to the 12 RBSs in the receiving direction. This is a very important function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
Save money by installing our Multi Operator Combiner
By utilizing our Multi Operator Combiner you will reduce the cost of antennas, feeders and installation. It eliminates the cost inef-fi cient need to make one antenna installation for each system. By simply connecting the RBSs into the combiner it will render you all the benefi ts of antenna sharing.
EGANTCELLULAR COMPONENTS
-
Egant Cellular ComponentsBox 945SE-114 79 StockholmSwedenPhone: +46 (0)8 620 06 50Fax: +46 (0)70 386 53 53E-mail: [email protected]
Technical Specifi cations for the Multi Operator CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number:Passband:Port 1 GSM900:Port 2 GSM900:Port 3 GSM900:Port 4 GSM900:Port 5 GSM1800:Port 6 GSM1800:Port 7 GSM1800:Port 8 GSM1800:Port 9 UMTS:Port 10 UMTS:Port 11 UMTS:Port 12 UMTS:
Insertion loss:Port 1 - 4 GSM900 - ANT 1 - 4:Port 5 - 8 GSM1800 - ANT 1 - 4:Port 9 - 12 UMTS - ANT 1 - 4:
Coupling (1 INPUT 4 - OUT):Port 1 - 4 GSM900 - ANT 1 - 4:Port 5 - 8 GSM1800 - ANT 1 - 4:Port 9 - 12 UMTS - ANT 1 - 4:
Input return loss:Isolation between systems:Isolation between same systems:Intermodulation 2 x 43 dBm:
Max input power/port:Impedance in/out:
EG 100 4202
806 - 960 MHz806 - 960 MHz806 - 960 MHz806 - 960 MHz 1710 -1880 MHz1710 - 1880 MHz1710 - 1880 MHz1710 - 1880 MHz 1920 - 2170 MHz1920 - 2170 MHz 1920 - 2170 MHz1920 - 2170 MHz
< 1.0 dB< 1.0 dB< 1.0 dB
6.0 dB +/- 0.5 dB6.0 dB +/- 0.5 dB6.0 dB +/- 0.5 dB
> 18.0 dB> 50 dB> 25 dB< 117 dBm (160 dBc)
60 W50 Ohm
Mechanical Specifi cationsDimensions (W x H x D):Connectors:Weight:
300 x 400 x 180 mm7/16 (f)22 kg
Environmental Specifi cationsTemp. range (normal operation):Humidity:
Egant reserves the right to change this product specifi cation at any time without notice.
-30 to +70 CRelative 5 - 100%
RevB
-
Multi Operator Combiner4 x GSM900, UMTS8 Inputs to 4 Antenna Ports
Combines 8 RBSs into 4 antenna ports
This Multi Operator Combiner enables 8 Radio Base Stations to connect to the combiner:
4 GSM900 Radio Base Stations4 UMTS Radio Base Stations
The combiner combines the 8 signals to the4 antenna ports, or splits the signal to the 8 RBSs in the receiving direction.This is a highly im-portant function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
Save money by installing our Multi Operator Combiner
By utilizing our Multi Operator Combiner you will reduce the cost of antennas, feeders and installation.It eliminates the cost inef-fi cient need to make one antenna installation for each system. By simply connecting the RBSs into the combiner it will immediately render you all the benefi ts of antenna sharing.
UM
TSU
MTS
UM
TSU
MTS
UM
TSU
MTS
UM
TSU
MTS
ANT2ANT2
ANT1ANT1
GSM
900
GSM
900
GSM
900
GSM
900
GSM
900
GSM
900
GSM
900
GSM
900
ANT3ANT3
ANT4ANT4
UM
TSU
MTS
UM
TSU
MTS
UM
TSU
MTS
UM
TSU
MTS
ANT2ANT2
ANT1ANT1
GSM
900
GSM
900
GSM
900
GSM
900
GSM
900
GSM
900
GSM
900
GSM
900
ANT3ANT3
ANT4ANT4
EGANTCELLULAR COMPONENTS
-
Egant Cellular ComponentsBox 945SE-114 79 StockholmSwedenPhone: +46 (0)8 620 06 50Fax: +46 (0)70 386 53 53E-mail: [email protected]
Technical Specifi cations for the Multi Operator CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number:Passband:Port 1 GSM900:Port 2 GSM900:Port 3 GSM900:Port 4 GSM900:Port 5 UMTS:Port 6 UMTS:Port 7 UMTS:Port 8 UMTS:
Insertion loss:Port 1 - 4 GSM900 - ANT 1 - 4:Port 5 - 8 UMTS - ANT 1 - 4:
Input return loss:Isolation between systems:Isolation between same systems:Intermodulation 2 x 43 dBm:
Max input power/port:Impedance in/out:
EG 100 4205
806 - 960 MHz806 - 960 MHz806 - 960 MHz806 - 960 MHz 1920 - 2170 MHz1920 - 2170 MHz 1920 - 2170 MHz1920 - 2170 MHz
< 7.0 dB< 7.0 dB
> 18.0 dB> 50 dB> 25 dB< 117 dBm (160 dBc)
60 W50 Ohm
Mechanical Specifi cationsDimensions (W x H x D):Connectors:Weight:
300 x 400 x 120 mm7/16 (f)15 kg
Environmental Specifi cationsTemp. range (normal operation):Humidity:
Egant reserves the right to change this product specifi cation at any time without notice.
-30 to +70 CRelative 5 - 100%
RevB
-
Multi Operator Combiner4 x GSM900, GSM18008 Inputs to 4 Antenna Ports
Combines 8 RBSs into 4 antenna ports
This Multi Operator Combiner enables 8 Radio Base Stations to connect to the combiner:
4 GSM900 Radio Base Stations4 1800 Radio Base Stations
The combiner combines the 8 signals to the4 antenna ports, or splits the signal to the 8 RBSs in the receiving direction. This is a highly im-portant function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
UM
TSU
MTS
GSM
1800
GSM
1800
GSM
1800
GSM
1800
GSM
1800
GSM
1800
ANT2ANT2
ANT1ANT1
GSM
900
GSM
900
GSM
900
GSM
900
GSM
900
GSM
900
GSM
900
GSM
900
ANT3ANT3
ANT4ANT4U
MTS
UM
TSG
SM18
00G
SM18
00G
SM18
00G
SM18
00G
SM18
00G
SM18
00
ANT2ANT2
ANT1ANT1
GSM
900
GSM
900
GSM
900
GSM
900
GSM
900
GSM
900
GSM
900
GSM
900
ANT3ANT3
ANT4ANT4
EGANTCELLULAR COMPONENTS
Save money by installing our MultiOperator Combiner
By utilizing our Multi Operator Combiner you will reduce the cost of antennas, feeders and installation. It eliminates the cost ineffi cient need to make one antenna installation for each system. By simply connecting the RBSs into the combiner it will immediately render you all the benefi ts of antenna sharing.
-
Egant Cellular ComponentsBox 945SE-114 79 StockholmSwedenPhone: +46 (0)8 620 06 50Fax: +46 (0)70 386 53 53E-mail: [email protected]
Technical Specifi cations for the Multi Operator CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number:Passband: Port 1 GSM900:Port 2 GSM900:Port 3 GSM900:Port 4 GSM900:Port 5 GSM1800:Port 6 GSM1800:Port 7 GSM1800:Port 8 GSM1800:
Insertion loss:Port 1 - 4 GSM900 - ANT 1 - 4:Port 5 - 8 GSM1800 - ANT 1 - 4:
Input return loss:Isolation between systems:Isolation between same systems:Intermodulation 2 x 43 dBm:
Max input power/port:Impedance in/out:
EG 100 4206
806 - 960 MHz806 - 960 MHz806 - 960 MHz806 - 960 MHz 1710 - 1880 MHz1710 - 1880 MHz1710 - 1880 MHz1710 - 1880 MHz
< 7.0 dB< 7.0 dB
> 18.0 dB> 50 dB> 25 dB< 117 dBm (160 dBc)
60 W50 Ohm
Mechanical Specifi cationsDimensions (W x H x D):Connectors:Weight:
300 x 400 x 120 mm7/16 (f)15 kg
Environmental Specifi cationsTemp. range (normal operation):Humidity:
Egant reserves the right to change this product specifi cation at any time
without notice.
-30 to +70 CRelative 5 - 100%
RevB
-
Multi Operator Combiner4 x GSM900 / CDMA, GSM1800, UMTS12 Ports In - 4 Ports Out
Combines 12 RBSs into 4 antenna ports
This Multi Operator Combiner enables 12 Ra-dio Base Stations to connect to the combiner:
4 GSM900 / CDMA Radio Base Stations4 GSM1800 Radio Base Stations4 UMTS Radio Base Stations
The combiner combines the 12 signals to the4 antenna ports, or splits the signal to the 12 RBSs in the receiving direction. This is a highly important function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
Save money by installing our Multi Operator Combiner
By utilizing our Multi Operator Combiner you will reduce the cost of antennas, feeders and installation. It eliminates the cost inef-fi cient need to make one antenna installation for each system. By simply connecting the RBSs into the combiner it will immediately render you all the benefi ts of antenna sharing.
EGANTCELLULAR COMPONENTS
-
Egant Cellular ComponentsBox 945SE-114 79 StockholmSwedenPhone: +46 (0)8 620 06 50Fax: +46 (0)70 386 53 53E-mail: [email protected]
Technical Specifi cations for the Multi Operator CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number:Passband:Port 1 GSM900 / CDMA:Port 2 GSM900 / CDMA:Port 3 GSM900 / CDMA:Port 4 GSM900 / CDMA:Port 5 GSM1800:Port 6 GSM1800:Port 7 GSM1800:Port 8 GSM1800:Port 9 UMTS:Port 10 UMTS: Port 11 UMTS:Port 12 UMTS:
Insertion loss:Port 1 - 4 GSM900 - ANT 1 - 4:Port 5 - 8 GSM1800 - ANT 1 - 4:Port 9 - 12 UMTS - ANT 1 - 4:
Input return loss:Isolation between systems:Isolation between same systems:Intermodulation 2 x 43 dBm:
Max input power/port:Impedance in/out:
EG 100 4209
824 - 960 MHz824 - 960 MHz824 - 960 MHz824 - 960 MHz 1710 - 1880 MHz1710 - 1880 MHz1710 - 1880 MHz1710 - 1880 MHz 1920 - 2170 MHz1920 - 2170 MHz 1920 - 2170 MHz1920 - 2170 MHz
< 7.9 dB (7 dB typ)< 7.9 dB (7 dB typ)< 7.9 dB (7 dB typ)
> 17.0 dB> 50 dB> 25 dB< 117 dBm (160 dBc)
100 W50 Ohm
EG 100 4210
824 - 960 MHz824 - 960 MHz824 - 960 MHz824 - 960 MHz 1710 - 1880 MHz1710 - 1880 MHz1710 - 1880 MHz1710 - 1880 MHz 1920 - 2170 MHz1920 - 2170 MHz 1920 - 2170 MHz1920 - 2170 MHz
< 7.9 dB (7 dB typ)< 7.9 dB (7 dB typ)< 7.9 dB (7 dB typ)
> 17.0 dB> 50 dB> 25 dB< 117 dBm (160 dBc)
100 W50 Ohm
Mechanical Specifi cationsDimensions (W x H x D):Connectors:Weight:
494 x 214 x 500 mmN (f)24 kg
494 x 214 x 500 mm7/16 (f)24 kg
Environmental Specifi cationsTemp. range (normal operation):Humidity:
Egant reserves the right to change this product specifi cation at any time without notice.
-30 to +70 CRelative 5 - 100%
-30 to +70 CRelative 5 - 100%
RevB
1920 - 2170 MHz 4 Ports
824 - 960 MHz 4 Ports
1710 - 1880 MHz 4 Ports
Antenna 4 Ports (all systems)
Monitor Port -30 dB
-
Multi Operator Combiner4 xCDMA800/GSM900, 4 x GSM1800, 4 x UMTS4 Antenna Ports
Combines up to 12 RBSs into 4 antenna ports
This Multi Operator Combiner enables up to 12 Radio Base Stations to connect to the combiner:
4 CDMA800/GSM900 Radio Base Stations4 GSM1800 Radio Base Stations4 UMTS Radio Base Stations
The combiner combines the signals to the4 antenna ports, or splits the signal to the 12 RBSs in the receiving direction. This is a highly important function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
Save money by installing our Multi Operator Combiner
By utilizing the Egant Multi Operator Com-biner you will reduce the cost of antennas, feeders and installation. It eliminates the cost ineffi cient need to make one antenna instal-lation for each system. By simply connecting the RBSs into the combiner it will immedi-ately render you all the benefi ts of antenna sharing.
EGANTCELLULAR COMPONENTS
-
Egant Cellular ComponentsBox 945SE-114 79 StockholmSwedenPhone: +46 (0)8 620 06 50Fax: +46 (0)70 386 53 53E-mail: [email protected]
Technical Specifi cations for the Multi Operator CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number:Passband:Port 1: CDMA800/GSM900Port 2: CDMA800/GSM900Port 3: CDMA800/GSM900Port 4: CDMA800/GSM900Port 5: GSM1800Port 6: GSM1800Port 7: GSM1800Port 8: GSM1800Port 9: UMTSPort 10: UMTS Port 11: UMTSPort 12: UMTS
Insertion loss:Port 1 - 4: CDMA800 - ANT 1 - 4Port 5 - 8: GSM1800 - ANT 1 - 4Port 9 - 12: UMTS - ANT 1 - 4
Coupling:Port 1 - 4: CDMA800 - ANT 1 - 4Port 5 - 8: GSM1800 - ANT 1 - 4Port 9 - 12: UMTS - ANT 1 - 4
Input return loss:Isolation between systems:Isolation between same systems:Intermodulation 2 x 43 dBm:
Max input power/port:Impedance in/out:
EG 601 0048
806 - 960 MHz806 - 960 MHz806 - 960 MHz806 - 960 MHz 1710 - 1880 MHz1710 - 1880 MHz1710 - 1880 MHz1710 - 1880 MHz 1920 - 2170 MHz1920 - 2170 MHz 1920 - 2170 MHz1920 - 2170 MHz
< 1.2 dB< 1.2 dB< 1.2 dB
6.0 dB +/- 0.6 dB6.0 dB +/- 0.6 dB6.0 dB +/- 0.6 dB
> 18.0 dB> 50 dB> 25 dB< 117 dBm (160 dBc)
60 W50 Ohm
Mechanical Specifi cationsDimensions (W x H x D):Connectors:Weight:
450 x 250 x 500 mmN (f)20 kg
Environmental Specifi cationsTemp. range (normal operation):Humidity:
Egant reserves the right to change this product specifi cation at any time without notice.
-30 to +70 CRelative 5 - 100%
RevA
-
3G / UMTS Upgrade Module 2G - 3G / UMTS
Connects 3G / UMTS to existing 2G indoor system
This 3G Upgrade Module enables the connection of 3G / UMTS to your existing 2G infrastructure. This is a cost effective solution when adding 3G to your system.
2G systems are easily connected to the Upgrade Module and then combined with the 3G system, which in turn makes all systems available at the common antenna port.
Save money
Installing the 3G Upgrade Module will render you instantaneous savings since it enables you to use your existing antenna system. Moreover, it eliminates the cost of additional feeders, grounding kits, clamps, installation and maintenance.
Existing indoor Existing indoor SystemSystem
GSM900, GSM1800 GSM900, GSM1800 CDMA/AMPSCDMA/AMPS 3G
/UM
TS3G
/UM
TS
ANTANT
Existing indoor Existing indoor SystemSystem
GSM900, GSM1800 GSM900, GSM1800 CDMA/AMPSCDMA/AMPS 3G
/UM
TS3G
/UM
TS
ANTANT EGANTCELLULAR COMPONENTS
-
Egant Cellular ComponentsBox 945SE-114 79 StockholmSwedenPhone: +46 (0)8 620 06 50Fax: +46 (0)70 386 53 53E-mail: [email protected]
Technical Specifi cations for the 3G / UMTS Upgrade ModuleBelow are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number:Passband:Port 1: Port 2:
Insertion loss:Port 1:Port 2:
Input return loss:Isolation between systems:
Max input power/port:Port 1:Port 2:
Impedance in/out:
EG 601 0002
806 - 960 MHz & 1710 - 1880 MHz1920 - 2170 MHz
< 0.7 dB (0.5 typ)< 0.5 dB (0.2 typ)
> 18.0 dB> 50 dB
< 250 W< 100 W
50 Ohm
Mechanical Specifi cationsDimensions (W x H x D):Connectors:Weight:
480 x 434 x 140 mm7/16 (f)11 kg
Environmental Specifi cationsTemp. range (normal operation):Humidity:Sealing:
Egant reserves the right to change this product specifi cation at any time
without notice.
-40 to +70 CRelative 5 - 100%IP65
RevB
-
Multi Operator Combiner1 x CDMA / GSM900, 4 x UMTS5 Inputs to 2 Antenna Ports
Combines 5 RBSs into 4 antenna ports
This Multi Operator Combiner enables 5 Ra-dio Base Stations to connect to the combiner:
1 GSM900 Radio Base Stations4 UMTS Radio Base Stations
The combiner combines the 5 signals to the4 antenna ports, or splits the signal to the 5 RBSs in the receiving direction. This is a highly important function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
Save money by installing our Multi Operator Combiner
By utilizing our Multi Operator Combiner you will reduce the cost of antennas, feeders and installation. It eliminates the cost inef-fi cient need to make one antenna installation for each system. By simply connecting the RBSs into the combiner it will immediately render you all the benefi ts of antenna sharing.
EGANTCELLULAR COMPONENTS
-
Egant Cellular ComponentsBox 945SE-114 79 StockholmSwedenPhone: +46 (0)8 620 06 50Fax: +46 (0)70 386 53 53E-mail: [email protected]
Technical Specifi cations for the Multi Operator CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number:Passband:Port 1 CDMA / GSM900:Port 2 UMTS:Port 3 UMTS:Port 4 UMTS:Port 5 UMTS:
Insertion loss:Port 1 GSM900 - ANT 1 - 4:Port 2 - 5 UMTS - ANT1 - 4:
Test port -30 dB:
Input return loss:Isolation between systems:Isolation between same systems:Intermodulation 2 x 40 dBm:
Max input power/port:Impedance in/out:
EG 601 0003
806 - 960 MHz1920 - 2170 MHz1920 - 2170 MHz1920 - 2170 MHz 1920 - 2170 MHz
< 7.0 dB (6.5 typ)< 7.0 dB (6.5 typ)
-30 dB +/- 0.5 dB
> 18.0 dB> 50 dB> 30 dB< 150 dBc
100 W50 Ohm
EG 601 0004
806 - 960 MHz1920 - 2170 MHz1920 - 2170 MHz1920 - 2170 MHz 1920 - 2170 MHz
< 7.0 dB (6.5 typ)< 7.0 dB (6.5 typ)
-30 dB +/- 0.5 dB
> 18.0 dB> 50 dB> 30 dB< 150 dBc
100 W50 Ohm
Mechanical Specifi cationsDimensions (W x H x D):Connectors:Weight:
494 x 214 x 500 mmN (f)15 kg
494 x 214 x 500 mm7/16 (f)15 kg
Environmental Specifi cationsTemp. range (normal operation):Humidity:
Egant reserves the right to change this product specifi cation at any time without notice.
-30 to +70 CRelative 5 - 100%
-30 to +70 CRelative 5 - 100%
RevB
-
Multi Operator Combiner1xCDMA, 3xGSM1800, 4xUMTS8 Ports In - 4 Ports Out1 Monitor Port
Combines 8 RBSs into 4 antenna ports
This Multi Operator Combiner enables 8 Radio Base Stations to connect to the combiner:
1 CDMA Radio Base Stations3 GSM1800 Radio Base Stations4 UMTS Radio Base Stations
The combiner combines the 8 signals to the4 antenna ports, or splits the signal to the 8 RBSs in the receiving direction. This is a highly important function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
Save money by installing our Multi Operator Combiner
By utilizing our Multi Operator Combiner you will reduce the cost of antennas, feeders and installation. It eliminates the cost inef-fi cient need to make one antenna installation for each system. By simply connecting the RBSs into the combiner it will immediately render you all the benefi ts of antenna sharing.
EGANTCELLULAR COMPONENTS
-
Egant Cellular ComponentsBox 945SE-114 79 StockholmSwedenPhone: +46 (0)8 620 06 50Fax: +46 (0)70 386 53 53E-mail: [email protected]
Technical Specifi cations for the Multi Operator CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number:Passband:Port 1 GSM900 / CDMA:Port 2 GSM1800:Port 3 GSM1800:Port 4 GSM1800:Port 5 UMTS:Port 6 UMTS: Port 7 UMTS:Port 8 UMTS:
Insertion loss:Port 1 GSM900 - ANT 1 - 4:Port 2 - 4 GSM1800 - ANT 1 - 4:Port 5 - 8 UMTS - ANT 1 - 4:
Monitoring port 30dB
Input return loss:Isolation between systems:Isolation between same systems:Intermodulation 2 x 43 dBm:
Max input power/port:Impedance in/out:
EG 601 0069
820 - 890 MHz1710 - 1880 MHz1710 - 1880 MHz1710 - 1880 MHz1920 - 2170 MHz1920 - 2170 MHz 1920 - 2170 MHz1920 - 2170 MHz
< 8.5 dB (7 dB typ)< 8.5 dB (7 dB typ)< 8.5 dB (7 dB typ)
-30dB +/- 2dB
> 18.0 dB> 70 dB> 30 dB< 140 dBc
100 W50 Ohm
EG 601 0070
820 - 890 MHz1710 - 1880 MHz1710 - 1880 MHz1710 - 1880 MHz1920 - 2170 MHz1920 - 2170 MHz 1920 - 2170 MHz1920 - 2170 MHz
< 8.5 dB (7 dB typ)< 8.5 dB (7 dB typ)< 8.5 dB (7 dB typ)
-30dB +/- 2dB
> 18.0 dB> 70 dB> 30 dB< 140 dBc
100 W50 Ohm
Mechanical Specifi cationsDimensions (W x H x D):Connectors:Weight:
494 x 214 x 500 mmN (f)30 kg
494 x 214 x 500 mm7/16 (f)30 kg
Environmental Specifi cationsTemp. range (normal operation):Humidity:
Egant reserves the right to change this product specifi cation at any time without notice.
-30 to +70 CRelative 5 - 100%
-30 to +70 CRelative 5 - 100%
RevA
1920 - 2170 MHz 4 Ports
820 - 960 MHz 1 Ports
1710 - 1880 MHz 3 Ports
Antenna 4 Ports (all systems)
Monitor Port -30 dB
-
Multi Operator CombinerUMTS3 Inputs - 1 Output
Combines 3 UMTS signals into 1 antenna port
This Multi Operator Combiner enables the connec-tion of 3 RBSs/repeaters to the combiner.
The combiner combines the 3 signals to theantenna port, or splits the signal to the 3 RBSs in the receiving way. This is a highly desirable func-tion when designing shared antenna systems wish-ing to connect multiple RBSs to the shared anten-nas.
Save money by installing our Multi Operator Combiner
By utilizing our Multi Operator Combiner you will reduce the cost of antennas, feeders and installation. It eliminates the cost inef-fi cient need to make one antenna installation for each system. By simply connecting the RBSs into the combiner it will immediately render you all the benefi ts of antenna sharing.
ANT1ANT1
UM
TSU
MTS
UM
TSU
MTS
UM
TSU
MTS
EG 601 007
EGANTCELLULAR COMPONENTS
-
Egant Cellular ComponentsBox 945SE-114 79 StockholmSwedenPhone: +46 (0)8 620 06 50Fax: +46 (0)70 386 53 53E-mail: [email protected]
Technical Specifi cations for the Multi Operator CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number:Passband:Port 1 - 3 UMTS:
Insertion loss:Port 1 - 3 UMTS - ANT 1:
Input return loss:Isolation between same systems:
Max input power/port:Impedance in/out:
EG 601 0007
1920 - 2170 MHz
< 5.0 dB
> 18.0 dB> 25 dB
60 W50 Ohm
Mechanical Specifi cationsDimensions (W x H x D):Connectors:Weight:
300 x 100 x 350 mm7/16 (f)15 kg
Environmental Specifi cationsTemp. range (normal operation):Humidity:
Egant reserves the right to change this product specifi cation at any time without notice.
-30 to +70 CRelative 5 - 100%
RevB
-
Multi Operator Combiner2 x GSM900, GSM18004 Inputs to 2 Antenna Ports
Combines 4 RBSs into 2 antenna ports
This Multi Operator Combiner enables 4 RadioBase Stations to connect to the combiner:
2 GSM900 Radio Base Stations2 GSM1800 Radio Base Stations
The combiner combines the 4 signals to the2 antenna ports, or splits the signal to the 4RBSs in the receiving direction. This is a high-ly important function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
EGANTCELLULAR COMPONENTS
Save money by installing our MultiOperator Combiner
By utilizing our Multi Operator Combineryou will reduce the cost of antennas, feedersand installation. It eliminates the cost ineffi -cient need to make one antenna installation for each system. By simply connecting the RBSs into the combiner it will immediately render you all the benefi ts of antenna sharing.
UM
TSU
MTS
GSM
180
0G
SM 1
800
GSM
180
0G
SM 1
800
ANT1ANT1
ANT2ANT2
GSM
900
GSM
900
GSM
900
GSM
900
-
Egant Cellular ComponentsBox 945SE-114 79 StockholmSwedenPhone:+46 (0)8 620 06 50Fax: +46 (0)70 386 53 53E-mail: [email protected]
Technical Specifi cations for the Multi Operator CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number:Passband:Port 1 GSM900:Port 2 GSM900:
Port 3 GSM1800:Port 4 GSM1800:
Insertion loss:Port 1 - 2 GSM900 - ANT 1 - 2:Port 3 - 4 GSM1800 - ANT 1 - 2:
Input return loss:Isolation between systems:Isolation between same systems:Intermodulation 2 x 43 dBm
Max input power/port:Impedance in/out:
EG 601 0089
880 - 960 MHz880 - 960 MHz
1710 - 1880 MHz1710 - 1880 MHz
< 4.0 dB (typ 3.3 dB)< 4.0 dB (typ 3.4 dB)
> 18.0 dB> 50 dB> 25 dB< 117 dBm (160 dBc)
60 W50 Ohm
Mechanical Specifi cationsDimensions (W x H x D):Connectors:Weight:
300 x 400 x 120 mm7/16 (f)8 kg
Environmental Specifi cationsTemp. range (normal operation):Humidity:
Egant reserves the right to change this product specifi cation at any time
without notice.
-30 to +70 CRelative 5 - 100%
RevA
-
Egant Cellular ComponentsBox 945SE-114 79 StockholmSwedenPhone: +46 (0)8 620 06 50Fax: +46 (0)70 386 53 53E-mail: [email protected]
Technical Specifi cations for the Multi Operator CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number:Passband:Port 1 - 3 UMTS:
Insertion loss:Port 1 - 3 UMTS - ANT 1:
Input return loss:Isolation between same systems:
Max input power/port:Impedance in/out:
EG 601 0007
1920 - 2170 MHz
< 5.0 dB
> 18.0 dB> 25 dB
60 W50 Ohm
Mechanical Specifi cationsDimensions (W x H x D):Connectors:Weight:
300 x 100 x 350 mm7/16 (f)15 kg
Environmental Specifi cationsTemp. range (normal operation):Humidity:
Egant reserves the right to change this product specifi cation at any time without notice.
-30 to +70 CRelative 5 - 100%
RevB
-
Multi Operator Combiner3 x GSM900, GSM1800, UMTS9 Inputs to 2 or 4 Antenna Ports
GSM
900
GSM
900
GSM
900
GSM
900
GSM
900
GSM
900
GSM
900
GSM
900
GSM
900
GSM
900
GSM
900
GSM
900
GSM
180
0G
SM 1
800
GSM
180
0G
SM 1
800
GSM
180
0G
SM 1
800
GSM
180
0G
SM 1
800
GSM
180
0G
SM 1
800
GSM
180
0G
SM 1
800
UM
TSU
MTS
UM
TSU
MTS
UM
TSU
MTS
UM
TSU
MTS
UM
TSU
MTS
UM
TSU
MTS
ANT1ANT1
ANT2ANT2
ANT1ANT1
ANT2ANT2
Combines GSM900 / GSM1800 / UMTSinto 2 or 4 antenna ports
This Multi Operator Combiner enables a maximum of 9 Radio Base Stations to connect to the combiner:
3 GSM900 Radio Base Stations3 GSM1800 Radio Base Stations3 UMTS Radio Base Stations
The combiner combines the 9 signals to the2 (4) antenna ports, or splits the signal to the 9 RBSs in the receiving direction. This is a highly important function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
Save money by installing our Multi Operator Combiner
By utilizing our Multi Operator Combiner you will reduce the cost of antennas, feeders and installation. It eliminates the cost inef-fi cient need to make one antenna installation for each system. By simply connecting the RBSs into the combiner it will immediately render you all the benefi ts of antenna sharing.
EGANTCELLULAR COMPONENTS
-
Egant Cellular ComponentsBox 945SE-114 79 StockholmSwedenPhone: +46 (0)8 620 06 50Fax: +46 (0)70 386 53 53E-mail: [email protected]
Technical Specifi cations for the Multi Operator CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number:Passband:Port 1 GSM900:Port 2 GSM900:Port 3 GSM900:Port 4 GSM1800:Port 5 GSM1800:Port 6 GSM1800:Port 7 UMTS:Port 8 UMTS:Port 9 UMTS:
Antenna ports:
Insertion loss:Port 1 - 3 GSM900 - ANT 1 - 2 + 3 - 4:Port 4 - 6 GSM1800 - ANT 1 - 2 + 3 - 4:Port 7 - 9 UMTS - ANT 1 - 4 + 3 - 4:
Input return loss:Isolation between systems:Isolation between same systems:Intermodulation 2 x 43 dBm:
Max input power/port:Impedance in/out:
EG 601 0014
806 - 960 MHz806 - 960 MHz806 - 960 MHz1710 - 1880 MHz1710 - 1880 MHz1710 - 1880 MHz1920 - 2170 MHz1920 - 2170 MHz1920 - 2170 MHz
2
< 7.0 dB< 7.0 dB< 7.0 dB
> 20.0 dB> 50 dB> 25 dB< 117 dBm (160 dBc)
60 W50 Ohm
EG 601 0015
806 - 960 MHz806 - 960 MHz806 - 960 MHz1710 - 1880 MHz1710 - 1880 MHz1710 - 1880 MHz1920 - 2170 MHz1920 - 2170 MHz1920 - 2170 MHz
4
< 7.0 dB< 7.0 dB< 7.0 dB
> 20.0 dB> 50 dB> 25 dB< 117 dBm (160 dBc)
60 W50 Ohm
Mechanical Specifi cationsDimensions (W x H x D):Connectors:Weight:
300 x 400 x 180 mm7/16 (f)22 kg
300 x 400 x 180 mm7/16 (f)22 kg
Environmental Specifi cationsTemp. range (normal operation):Humidity:
Egant reserves the right to change this product specifi cation at any time without notice.
-30 to +70 CRelative 5 - 100%
-30 to +70 CRelative 5 - 100%
RevB
-
EGANTCELLULAR COMPONENTS
EGANT CELLULAR COMPONENTS
Multi Operator Combiner4x GSM900 / 4x GSM18004 Inputs to 2 Antenna Ports
Combines GSM900/ GSM1800into 2 Antenna-ports.The Multi Operator Combiner allows you toconnect a maximum of 2 Radio Base Stationsto the Combiner.2 GSM900 Radio Base StationsThe Combiner combines the 4 signals to the2-Antenna ports or in the receiving waysplits the signal to the 2 RBSs.The product is also available for GSM1800.This is a extremely important function whenyou are designing shared antenna systemsand like to connect multiple RBSs to thesame antennas.
Save money by using our Multi Opera-tor Combiner.By using our Multi Operator Combiner you will reduce the cost of antennas, feeders and installation cost.You will not need to make one antennainstallation for each system, just plug yourRBSs into the combiner and it will give you the benefi t of share all antennas.
Multi Opertor CombinerEG 601 0031
-
Egant Cellular ComponentsBox 945SE-114 79 StockholmSwedenPhone:+46 (0)8 62 00 650Fax: +46 (0)70 386 53 53E-mail: [email protected]
Technical Specifi cations for the Multi Operator CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number:PassbandPort1: Tx/Rx1Port2: Rx2Port3: Tx/Rx1Port4: Rx2
InsertionlossPort1+3 - ANT1Port2+4 - ANT2
Coupling (1INPUT 2-OUT)Port1+3 - ANT1Port2+4 - ANT2
Input return loss:Isolation between Systems:Intermodulation 2x43dBm
Max input power/port:Impedance in/out:
EG 601 0031
806 - 960MHz806 - 960MHz806 - 960MHz806 - 960MHz
< 0.3 dB< 0.3 dB
3.0 dB +/- 0,5dB3.0 dB +/- 0,5dB
> 18.0 dB> 25 dB< 117 dBm (160dBc)
60 W50 Ohm
EG 601 0032
1710-1880MHz1710-1880MHz1710-1880MHz1710-1880MHz
< 0.3 dB< 0.3 dB
3.0 dB +/- 0,5dB3.0 dB +/- 0,5dB
> 18.0 dB> 25 dB< 117 dBm (160dBc)
60 W50 Ohm
Mechanical Specifi cationsDimensions (WxHxD):Connectors:Weight:
200 x 200 x 120 mm7/16 (f)9kg
200 x 200 x 120 mm7/16 (f)9kg
Environmental Specifi cationsTemp. range (normal operation):Humidity:
- 30 to + 70 CRelative 5 - 100%
- 30 to + 70 CRelative 5 - 100%
RevA
-
Multi Operator Combiner4 x GSM900, 4 x GSM18008 Inputs to 2 Antenna Ports
Combines GSM900 / GSM1800 into 2antenna ports
This Multi Operator Combiner enables 4 RadioBase Stations to connect to the combiner:
4 GSM900 Radio Base Stations4 GSM1800 Radio Base Stations
The combiner combines the 8 signals to the 2 antenna ports, or splits the signal to the 8 RBSs in the receiving direction. This is a highly important function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
Multi Operator CombinerEG 601 0030
EGANTCELLULAR COMPONENTS
Save money by installing our MultiOperator Combiner
By utilizing our Multi Operator Combineryou will reduce the cost of antennas, feedersand installation. It eliminates the cost ineffi cient need to make one antenna installation foreach system. By simply connecting the RBSsinto the combiner it will immediately renderyou all the benefi ts of antenna sharing.
-
Egant Cellular ComponentsBox 945SE-114 79 StockholmSwedenPhone:+46 (0)8 620 06 50Fax: +46 (0)70 386 53 53E-mail: [email protected]
Technical Specifi cations for the Multi Operator CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number:Passband:Port 1 GSM900 Tx / Rx 1:Port 2 GSM900 Rx 2:Port 3 GSM900 Tx / Rx 1:Port 4 GSM900 Rx 2:
Port 5 GSM1800 Tx / Rx 1:Port 6 GSM1800 Rx 2:Port 7 GSM1800 Tx / Rx 1:Port 8 GSM1800 Rx 2:
Insertion loss:Port 1 - 4 GSM900 - ANT 1 - 4:Port 5 - 8 GSM1800 - ANT 1 - 4:
Coupling (1 INPUT 2 - OUT):Port 1 + 3 GSM900 - ANT 1:Port 2 + 4 GSM900 - ANT 2:
Port 5 + 7 GSM1800 - ANT 1:Port 6 + 8 GSM1800 - ANT 2:
Input return loss:Isolation between systems:Isolation between same systems:Intermodulation 2 x 43 dBm:
Max input power/port:Impedance in/out:
EG 601 0030
806 - 960 MHz806 - 960 MHz806 - 960 MHz806 - 960 MHz
1710 - 1880 MHz1710 - 1880 MHz1710 - 1880 MHz1710 - 1880 MHz
< 1.0 dB (typ. 0.3 dB)< 1.0 dB (typ. 0.3 dB)
3.0 dB +/- 0.5 dB3.0 dB +/- 0.5 dB
3.0 dB +/- 0.5 dB3.0 dB +/- 0.5 dB
> 18.0 dB> 50 dB> 25 dB< 117 dBm (160 dBc)
60 W50 Ohm
Mechanical Specifi cationsDimensions (W x H x D):Connectors:Weight:
300 x 400 x 180 mm7/16 (f)15 kg
Environmental Specifi cationsTemp. range (normal operation):Humidity:
Egant reserves the right to change this product specifi cation at any time
without notice.
-30 to +70 CRelative 5 - 100%
RevB
-
EGANT CELLULAR COMPONENTS
Multi Operator Combiner4 x GSM900, GSM1800, UMTS1 x TETRA / PMR, FM 14 Inputs to 4 Antenna Ports
GSM
900
GSM
900
ANT2ANT2
GSM
900
GSM
900
ANT1ANT1
GSM
900
GSM
900
GSM
900
GSM
900
GSM
180
0G
SM 1
800
GSM
180
0G
SM 1
800
GSM
180
0G
SM 1
800
GSM
180
0G
SM 1
800
UM
TSU
MTS
UM
TSU
MTS
UM
TSU
MTS
UM
TSU
MTS
ANT3ANT3
ANT4ANT4G
SM 9
00G
SM 9
00ANT2ANT2
GSM
900
GSM
900
ANT1ANT1
GSM
900
GSM
900
GSM
900
GSM
900
GSM
180
0G
SM 1
800
GSM
180
0G
SM 1
800
GSM
180
0G
SM 1
800
GSM
180
0G
SM 1
800
UM
TSU
MTS
UM
TSU
MTS
UM
TSU
MTS
UM
TSU
MTS
ANT3ANT3
ANT4ANT4
Combines GSM900 / GSM1800 / UMTS / TETRA / FM into 4 antenna ports
The Multi Operator Combiner enables a maxi-mum of 14 Radio Base Stations to connect to the combiner:
4 GSM900 Radio Base Stations4 GSM1800 Radio Base Stations4 UMTS Radio Base Stations1 TETRA / PMR Radio Base Station1 FM Radio Base Station
The combiner combines the 14 signals to the4 antenna ports, or splits the signal to the 14 RBSs in the receiving direction. This is a very important function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
Save money by installing our Multi Operator Combiner
By utilizing our Multi Operator Combiner you will reduce the cost of antennas, feeders and installation. It eliminates the cost inef-fi cient need to make one antenna installation for each system. By simply connecting the RBSs into the combiner it will render you all the benefi ts of antenna sharing.
EGANTCELLULAR COMPONENTS
TETRA / PMR
FM
-
Egant Cellular ComponentsBox 945SE-114 79 StockholmSwedenPhone: +46 (0)8 620 06 50Fax: +46 (0)70 386 53 53E-mail: [email protected]
Technical Specifi cations for the Multi Operator CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number:Passband:Port 1 GSM900 - 1:Port 2 GSM900 - 2:Port 3 GSM900 - 3:Port 4 GSM900 - 4:Port 5 GSM1800 - 1:Port 6 GSM1800 - 2:Port 7 GSM1800 - 3:Port 8 GSM1800 - 4:Port 9 UMTS - 1:Port 10 UMTS - 2:Port 11 UMTS - 3:Port 12 UMTS - 4:Port 13 TETRA (option EG 601 0018):Port 14 FM (option EG 601 0018):
Insertion loss:Port 1 - 4 GSM900 - ANT 1 - 4:Port 5 - 8 GSM1800 - ANT 1 - 4:Port 9 - 12 UMTS - ANT 1 - 4:Port 13 TETRA - ANT 1 - 4:Port 14 FM - ANT 1 - 4:
Coupling (1 INPUT 4 - OUT):Port 1, 2, 5, 6, 11, 12 to ANT 1 - 4:Port 3, 7 to - ANT 3, 4:Port 3, 7 to - ANT 2 (option EG 601 0019):Port 4, 8 to - ANT 1, 2:Port 4, 8 to - ANT 3 (option EG 601 0019):Port 13 to ANT 1 - 4:Port 14 to ANT 1 - 4:
Input return loss:Isolation between systems:Isolation between same systems:Intermodulation 2 x 43 dBm:
Max input power/port:Impedance in/out:
EG 601 0017
806 - 960 MHz806 - 960 MHz806 - 960 MHz806 - 960 MHz 1710 -1880 MHz1710 - 1880 MHz1710 - 1880 MHz1710 - 1880 MHz 1920 - 2170 MHz1920 - 2170 MHz 1920 - 2170 MHz1920 - 2170 MHz376 - 500 MHz88 - 108 MHz
< 1.0 dB< 1.0 dB< 1.0 dB< 1.0 dB< 1.0 dB
6.0 dB +/- 0.5 dB6.0 dB +/- 0.5 dB30.0 dB +/- 0.5 dB6.0 dB +/- 0.5 dB30.0 dB +/- 0.5 dB6.0 dB +/- 0.5 dB6.0 dB +/- 0.5 dB
> 18.0 dB> 50 dB> 25 dB< 117 dBm (160 dBc)
60 W50 Ohm
Mechanical Specifi cationsDimensions (W x H x D):Connectors port 1 - 12:Connectors port 13, 14:Weight:
300 x 800 x 180 mm7/16 (f)N (f)28 kg
Environmental Specifi cationsTemp. range (normal operation):Humidity:
Egant reserves the right to change this product specifi cation at any time without notice.
-30 to +70 CRelative 5 - 100%
RevB
-
Multi Operator Combiner6 x GSM900, 2 x GSM18008 Ports In - 4 Ports Out
Combines 8 RBSs into 4 antenna ports
This Multi Operator Combiner enables 8 Ra-dio Base Stations to connect to the combiner:
6 GSM900 Radio Base Stations2 GSM1800 Radio Base Stations
The combiner combines the 8 signals to the4 antenna ports, or splits the signal to the 8 RBSs in the receiving direction. This is a highly important function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
Save money by installing our Multi Operator Combiner
By utilizing our Multi Operator Combiner you will reduce the cost of antennas, feeders and installation. It eliminates the cost inef-fi cient need to make one antenna installation for each system. By simply connecting the RBSs into the combiner it will immediately render you all the benefi ts of antenna sharing.
UM
TSU
MTS
GSM
900
GSM
900
GSM
900
GSM
900
UM
TSU
MTS
ANT2ANT2ANT2ANT2
ANT1ANT1
GSM
900
GSM
900
GSM
900
GSM
900
GSM
900
GSM
900
GSM
900
GSM
900
ANT3ANT3
ANT4ANT4ANT4ANT4
GSM
1800
GSM
1800
GSM
1800
GSM
1800
EGANTCELLULAR COMPONENTS
-
Egant Cellular ComponentsBox 945SE-114 79 StockholmSwedenPhone: +46 (0)8 620 06 50Fax: +46 (0)70 386 53 53E-mail: [email protected]
Technical Specifi cations for the Multi Operator CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number:Passband:Port 1 GSM900:Port 2 GSM900:Port 3 GSM900:Port 4 GSM900:Port 5 GSM900:Port 6 GSM900:Port 7 GSM1800:Port 8 GSM1800:
Insertion loss:Port 1 - 4 GSM900 - ANT 1 - 6:Port 5 - 8 GSM1800 - ANT 1 - 4:
Input return loss:Isolation between systems:Isolation between same systems:
Max input power/port:Impedance in/out:
EG 601 0022
806 - 960 MHz806 - 960 MHz806 - 960 MHz806 - 960 MHz 806 - 960 MHz806 - 960 MHz 1710 - 1880 MHz1710 - 1880 MHz
< 10.0 dB< 7.0 dB
> 18.0 dB> 50 dB> 25 dB
60 W50 Ohm
Mechanical Specifi cationsDimensions (W x H x D):Connectors:Weight:
300 x 400 x 120 mm7/16 (f)15 kg
Environmental Specifi cationsTemp. range (normal operation):Humidity:
Egant reserves the right to change this product specifi cation at any time
without notice.
-30 to +70 CRelative 5 - 100%
RevB
-
Multi Operator Combiner4 x GSM900, UMTS8 Inputs to 2 Antenna Ports
Combines 8 RBSs into 4 antenna ports
This Multi Operator Combiner enables 8 RadioBase Stations to connect to the combiner:
4 GSM900 Radio Base Stations4 UMTS Radio Base Stations
The combiner combines the 8 signals to the2 antenna ports, or splits the signal to the 8RBSs in the receiving direction. This is a highly important function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
UM
TSU
MTS
UM
TSU
MTS
UM
TSU
MTS
UM
TSU
MTS
ANT2ANT2
ANT1ANT1
GSM
900
GSM
900
GSM
900
GSM
900
GSM
900
GSM
900
GSM
900
GSM
900
EGANTCELLULAR COMPONENTS
Save money by installing our MultiOperator Combiner
By utilizing our Multi Operator Combineryou will reduce the cost of antennas, feedersand installation. It eliminates the cost ineffi -cient need to make one antenna installation for each system. By simply connecting the RBSs into the combiner it will immediately render you all the benefi ts of antenna sharing.
-
Egant Cellular ComponentsBox 945SE-114 79 StockholmSwedenPhone:+46 (0)8 620 06 50Fax: +46 (0)70 386 53 53E-mail: [email protected]
Technical Specifi cations for the Multi Operator CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number:Passband:Port 1 GSM900:Port 2 GSM900:Port 3 GSM900:Port 4 GSM900:Port 5 UMTS:Port 6 UMTS:Port 7 UMTS:Port 8 UMTS:
Insertion loss:Port 1 - 4 GSM900 - ANT 1 - 2:Port 5 - 8 UMTS - ANT 1 - 2:
Input return loss:Isolation between systems:Isolation between same systems:Intermodulation 2 x 43 dBm
Max input power/port:Impedance in/out:
EG 601 0024
806 - 960 MHz806 - 960 MHz806 - 960 MHz806 - 960 MHz 1920 - 2170 MHz1920 - 2170 MHz 1920 - 2170 MHz1920 - 2170 MHz
< 7.0 dB< 7.0 dB
> 18.0 dB> 50 dB> 25 dB< 117 dBm (160 dBc)
60 W50 Ohm
Mechanical Specifi cationsDimensions (W x H x D):Connectors:Weight:
300 x 400 x 120 mm7/16 (f)15 kg
Environmental Specifi cationsTemp. range (normal operation):Humidity:
Egant reserves the right to change this product specifi cation at any time without notice.
-30 to +70 CRelative 5 - 100%
RevB
-
Multi Operator Combiner2 x GSM900, UMTS4 Inputs to 2 Antenna Ports
Combines 8 RBSs into 4 antenna ports
This Multi Operator Combiner enables 4 RadioBase Stations to connect to the combiner:
2 GSM900 Radio Base Stations2 UMTS Radio Base Stations
The combiner combines the 4 signals to the2 antenna ports, or splits the signal to the 4RBSs in the receiving direction. This is a high-ly important function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
UM
TSU
MTS
UM
TSU
MTS
ANT2ANT2
ANT1ANT1
GSM
900
GSM
900
GSM
900
GSM
900
EGANTCELLULAR COMPONENTS
Save money by installing our MultiOperator Combiner
By utilizing our Multi Operator Combineryou will reduce the cost of antennas, feedersand installation. It eliminates the cost ineffi -cient need to make one antenna installation for each system. By simply connecting the RBSs into the combiner it will immediately render you all the benefi ts of antenna sharing.
-
Egant Cellular ComponentsBox 945SE-114 79 StockholmSwedenPhone:+46 (0)8 620 06 50Fax: +46 (0)70 386 53 53E-mail: [email protected]
Technical Specifi cations for the Multi Operator CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number:Passband:Port 1 GSM900:Port 2 GSM900:
Port 3 UMTS:Port 4 UMTS:
Insertion loss:Port 1 - 2 GSM900 - ANT 1 - 2:Port 3 - 4 UMTS - ANT 1 - 2:
Input return loss:Isolation between systems:Isolation between same systems:Intermodulation 2 x 43 dBm
Max input power/port:Impedance in/out:
EG 601 0025
806 - 960 MHz806 - 960 MHz
1920 - 2170 MHz1920 - 2170 MHz
< 4.0 dB (typ 3.3 dB)< 4.0 dB (typ 3.4 dB)
> 18.0 dB> 50 dB> 25 dB< 117 dBm (160 dBc)
60 W50 Ohm
Mechanical Specifi cationsDimensions (W x H x D):Connectors:Weight:
300 x 400 x 120 mm7/16 (f)9 kg
Environmental Specifi cationsTemp. range (normal operation):Humidity:
Egant reserves the right to change this product specifi cation at any time
without notice.
-30 to +70 CRelative 5 - 100%
RevB
-
Multi Operator Combiner2 x GSM900, 1 x UMTS3 Inputs to 1 Antenna Port
Combines 3 RBSs into 1 antenna port
This Multi Operator Combiner enables 3 RadioBase Stations to connect to the combiner:
2 GSM900 Radio Base Stations1 UMTS Radio Base Station
The combiner combines the 3 signals to the antenna port, or splits the signal to the 3RBSs in the receiving direction. This is a highly important function when designing shared an-tenna systems wishing to connect multiple RBSs to the shared antennas.
UM
TSU
MTS
ANT1ANT1
GSM
900
GSM
900
GSM
900
GSM
900
EGANTCELLULAR COMPONENTS
Save money by installing our MultiOperator Combiner
By utilizing our Multi Operator Combineryou will reduce the cost of antennas, feedersand installation. It eliminates the cost ineffi -cient need to make one antenna installation foreach system. By simply connecting the RBSsinto the combiner it will immediately renderyou all the benefi ts of antenna sharing.
-
Egant Cellular ComponentsBox 945SE-114 79 StockholmSwedenPhone:+46 (0)8 620 06 50Fax: +46 (0)70 386 53 53E-mail: [email protected]
Technical Specifi cations for the Multi Operator CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number:Passband:Port 1 GSM900:Port 2 GSM900:Port 3 UMTS:
Insertion loss:Port 1 - 2 GSM900 - ANT 1:Port 3 UMTS - ANT 1:
Input return loss:Isolation between systems:Isolation between same systems:Intermodulation 2 x 43 dBm:
Max input power/port:Impedance in/out:
EG 601 0026
806 - 960 MHz806 - 960 MHz1920 - 2170 MHz
< 3.5 dB (typ 3.3 dB)< 0.3 dB
> 18.0 dB> 50 dB> 25 dB< 117 dBm (160 dBc)
60 W50 Ohm
Mechanical Specifi cationsDimensions (W x H x D):Connectors:Weight:
300 x 400 x 120 mm7/16 (f)5 kg
Environmental Specifi cationsTemp. range (normal operation):Humidity:
Egant reserves the right to change this product specifi cation at any time
without notice.
-30 to +70 CRelative 5 - 100%
RevA
-
Multi Operator Combiner3 x GSM900, UMTS6 Inputs to 3 Antenna Ports
Combines 6 RBSs into 3 antenna ports
This Multi Operator Combiner enables 6 RadioBase Stations to connect to the combiner:
3 GSM900 Radio Base Stations3 UMTS Radio Base Stations
The combiner combines the 6 signals to the3 antenna ports, or splits the signal to the 6RBSs in the receiving direction. This is a highly important function when designing shared an-tenna systems wishing to connect multiple RBSs to the shared antennas.
Save money by installing our MultiOperator Combiner
By utilizing our Multi Operator Combineryou will reduce the cost of antennas, feedersand installation. It eliminates the cost ineffi -cient need to make one antenna installation for each system. By simply connecting the RBSs into the combiner it will immediately render you all the benefi ts of antenna sharing.
UM
TSU
MTS
UM
TSU
MTS
UM
TSU
MTS
ANT2ANT2
ANT1ANT1
GSM
900
GSM
900
GSM
900
GSM
900
GSM
900
GSM
900
ANT3ANT3 EGANTCELLULAR COMPONENTS
-
Egant Cellular ComponentsBox 945SE-114 79 StockholmSwedenPhone:+46 (0)8 620 06 50Fax: +46 (0)70 386 53 53E-mail: [email protected]
Technical Specifi cations for the Multi Operator CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number:Passband:Port 1 GSM900:Port 2 GSM900:Port 3 GSM900:Port 4 UMTS:Port 5 UMTS:Port 6 UMTS:
Insertion loss:Port 1 - 3 GSM900 - ANT 1 - 3:Port 4 - 6 UMTS - ANT 1 - 3:
Input return loss:Isolation between systems:Isolation between same systems:Intermodulation 2 x 43 dBm:
Max input power/port:Impedance in/out:
EG 601 0027
806 - 960 MHz806 - 960 MHz806 - 960 MHz1920 - 2170 MHz1920 - 2170 MHz 1920 - 2170 MHz
< 7.0 dB< 7.0 dB
> 18.0 dB> 50 dB> 25 dB< 117 dBm (160 dBc)
60 W50 Ohm
Mechanical Specifi cationsDimensions (W x H x D):Connectors:Weight:
300 x 400 x 120 mm7/16 (f)13 kg
Environmental Specifi cationsTemp. range (normal operation):Humidity:
Egant reserves the right to change this product specifi cation at any time
without notice.
-30 to +70 CRelative 5 - 100%
RevA
-
Multi Operator Combiner2 x GSM900, 1 x GSM1800 1 x UMTS4 Inputs to 1 Antenna Port
Combines 4 RBSs into 1 antenna port
This Multi Operator Combiner enables 4 RadioBase Stations to connect to the combiner:
2 GSM900 Radio Base Stations1 GSM1800 Radio Base Station1 UMTS Radio Base Station
The combiner combines the 4 signals to theantenna port, or splits the signal to the 4RBSs in the receiving direction. This is a highly important function when designing shared an-tenna systems wishing to connect multiple RBSs to the shared antennas.
UM
TSU
MTS
UM
TSU
MTS
GSM
180
0G
SM 1
800
GSM
180
0G
SM 1
800
ANT1ANT1
GSM
900
GSM
900
GSM
900
GSM
900
EGANTCELLULAR COMPONENTS
Save money by installing our MultiOperator Combiner
By utilizing our Multi Operator Combineryou will reduce the cost of antennas, feedersand installation. It eliminates the cost ineffi -cient need to make one antenna installation for each system. By simply connecting the RBSs into the combiner it will immediately render you all the benefi ts of antenna sharing.
-
Egant Cellular ComponentsBox 945SE-114 79 StockholmSwedenPhone:+46 (0)8 620 06 50Fax: +46 (0)70 386 53 53E-mail: [email protected]
Technical Specifi cations for the Multi Operator CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number:Passband:Port 1 GSM900:Port 2 GSM900:Port 3 GSM1800:Port 4 UMTS:
Insertion loss:Port 1 - 2 GSM900 - ANT 1:Port 3 GSM1800 - ANT 1:Port4 UMTS - ANT 1:
Input return loss:Isolation between systems:Isolation between same systems:Intermodulation 2 x 43 dBm:
Max input power/port:Impedance in/out:
EG 601 0028
806 - 960 MHz806 - 960 MHz1710 -1880 MHz1920 - 2170 MHz
< 3.5 dB (typ 3.3 dB)< 0.3 dB< 0.5 dB
> 18.0 dB> 50 dB> 25 dB< 117 dBm (160 dBc)
60 W50 Ohm
Mechanical Specifi cationsDimensions (W x H x D):Connectors:Weight:
300 x 400 x 120 mm7/16 (f)7 kg
Environmental Specifi cationsTemp. range (normal operation):Humidity:
Egant reserves the right to change this product specifi cation at any time
without notice.
-30 to +70 CRelative 5 - 100%
RevA
-
Multi Operator Combiner3 x GSM1800, 3 x UMTS6 Inputs to 1 Antenna Port
Combines 6 RBSs into 1 antenna port
This Multi Operator Combiner enables 6 RadioBase Stations to connect to the combiner:
3 GSM1800 Radio Base Stations3 UMTS Radio Base Stations
The combiner combines the 6 signals to the an-tenna port, or splits the signal to the 6RBSs in the receiving direction. This is a highly important function when designing shared an-tenna systems wishing to connect multiple RBSs to the shared antennas.
Save money by installing our MultiOperator Combiner
By utilizing our Multi Operator Combineryou will reduce the cost of antennas, feedersand installation. It eliminates the cost ineffi -cient need to make one antenna installation for each system. By simply connecting the RBSs into the combiner it will immediately render you all the benefi ts of antenna sharing.
EGANTCELLULAR COMPONENTS
GSM
1800G
SM1800
GSM
1800
UM
TS UMTS U
MTS
AN
T
-
Egant Cellular ComponentsBox 945SE-114 79 StockholmSwedenPhone:+46 (0)8 620 06 50Fax: +46 (0)70 386 53 53E-mail: [email protected]
Technical Specifi cations for the Multi Operator CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number:Passband:Port 1: GSM1800Port 2: GSM1800Port 3: GSM1800Port 4: UMTSPort 5: UMTSPort 6: UMTS
Insertion loss:Port 1 - 3: GSM1800 - ANTPort 4 - 6: UMTS - ANT
Input return loss:Isolation between systems:Isolation between same systems:Intermodulation 2 x 43 dBm:
Max input power/port:Impedance in/out:
EG 601 0050
1710 - 1880 MHz1710 - 1880 MHz1710 - 1880 MHz1920 - 2170 MHz1920 - 2170 MHz 1920 - 2170 MHz
< 5.8 dB< 5.8 dB
> 18.0 dB> 50 dB> 25 dB< 117 dBm (160 dBc)
60 W50 Ohm
Mechanical Specifi cationsDimensions (W x H x D):Connectors:Weight:
350 x 500 x 220 mm7/16 (f)14 kg
Environmental Specifi cationsTemp. range (normal operation):Humidity:
Egant reserves the right to change this product specifi cation at any time
without notice.
-30 to +70 CRelative 5 - 100%
RevA
-
Multi Operator Combiner4 x CDMA800/GSM9005 x GSM1800 5 x UMTS1 x WiFi4 x Antenna Ports4 x Monitor Ports
Combines up to 15 RBSs into 4 antenna ports
This Multi Operator Combiner enables up to 15 Radio Base Stations to connect to the combiner:
4 CDMA800/GSM900 Radio Base Stations5 GSM1800 Radio Base Stations5 UMTS Radio Base Stations1 WiFi Radio Base StationThe combiner combines the signals to the4 antenna ports, or splits the signal to the 15 RBSs in the receiving direction. This is a highly important function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
Save money by installing our Multi Operator Combiner
By utilizing the Egant Multi Operator Com-biner you will reduce the cost of antennas, feeders and installation. It eliminates the cost ineffi cient need to make one antenna instal-lation for each system. By simply connecting the RBSs into the combiner it will immedi-ately render you all the benefi ts of antenna sharing.
Monitoring ports
This product comes equipped with four -30 dB monitoring ports (N(f)).
EGANTCELLULAR COMPONENTS
-
Egant Cellular ComponentsBox 945SE-114 79 StockholmSwedenPhone: +46 (0)8 620 06 50Fax: +46 (0)70 386 53 53E-mail: [email protected]
Technical Specifi cations for the Multi Operator CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number:Passband:Port 1: GSM1800Port 2: GSM1800Port 3: GSM1800Port 4: GSM1800Port 5: GSM1800Port 6: CDMA800/GSM900Port 7: CDMA800/GSM900Port 8: CDMA800/GSM900Port 9: CDMA800/GSM900Port 10: WiFiPort 11: UMTSPort 12: UMTS Port 13: UMTSPort 14: UMTSPort 15: UMTS
Insertion loss:Port 1: GSM1800 - ANT 1 - 4Port 2 - 5: GSM1800 - ANT 1 - 4Port 6: CDMA/GSM900 - ANT 1 - 4Port 7 - 9: CDMA/GSM900 - ANT 1 - 4Port 10 WiFi - Ant 1 - 4Port 11: UMTS - ANT 1 - 4Port 12 - 15: UMTS - ANT 1 - 4
Coupling:Port 1 - 3: GSM1800 - ANT 1 - 4Port 4 - 5: GSM1800 - ANT 1 - 4Port 6 - 8: CDMA800 - ANT 1 - 4Port 9: CDMA800 - ANT 1 - 4Port 10 WiFi - Ant 1 - 4Port 11 - 13: UMTS - ANT 1 - 4Port 14 - 15: UMTS - ANT 1 - 4
Input return loss:Isolation between systems:Isolation between same systems:Intermodulation 2 x 43 dBm:
Max input power/port:Impedance in/out:
EG 601 0077
1710 - 1880 MHz1710 - 1880 MHz1710 - 1880 MHz1710 - 1880 MHz1710 - 1880 MHz806 - 960 MHz806 - 960 MHz806 - 960 MHz806 - 960 MHz2400-2500MHz1920 - 2170 MHz1920 - 2170 MHz 1920 - 2170 MHz1920 - 2170 MHz1920 - 2170 MHz
< 1.7 dB< 1.2 dB< 1.7 dB< 1.2 dB< 1.2 dB< 1.7 dB< 1.2 dB
6.0 dB +/- 0.6 dB9.0 dB +/- 0.6 dB6.0 dB +/- 0.6 dB9.0 dB +/- 0.6 dB6.0 dB +/- 0.6 dB6.0 dB +/- 0.6 dB9.0 dB +/- 0.6 dB
> 18.0 dB> 50 dB> 25 dB< 117 dBm (160 dBc)
60 W50 Ohm
EG 601 0078
1710 - 1880 MHz1710 - 1880 MHz1710 - 1880 MHz1710 - 1880 MHz1710 - 1880 MHz806 - 960 MHz806 - 960 MHz806 - 960 MHz806 - 960 MHz2400-2500MHz1920 - 2170 MHz 1920 - 2170 MHz1920 - 2170 MHz1920 - 2170 MHz1920 - 2170 MHz
< 1.7 dB< 1.2 dB< 1.7 dB< 1.2 dB< 1.2 dB< 1.7 dB< 1.2 dB
6.0 dB +/- 0.6 dB9.0 dB +/- 0.6 dB6.0 dB +/- 0.6 dB9.0 dB +/- 0.6 dB6.0 dB +/- 0.6 dB6.0 dB +/- 0.6 dB9.0 dB +/- 0.6 dB
> 18.0 dB> 50 dB> 25 dB< 117 dBm (160 dBc)
60 W50 Ohm
Mechanical Specifi cationsDimensions (W x H x D):Input connectors:Output connectors:Monitoring ports (-30 dB)Weight:
450 x 250 x 500 mm7/16 (f)N(f)N(f)30.5 kg
450 x 250 x 500 mmN (f)N(f)N(f)30..5 kg
RevA
-
Multi Operator Combiner3 x GSM1800, 3 x UMTS6 Inputs to 2 Antenna Ports
Combines 6 RBSs into 2 antenna ports
This Multi Operator Combiner enables 6 RadioBase Stations to connect to the combiner:
3 GSM1800 Radio Base Stations3 UMTS Radio Base Stations
The combiner combines the 6 signals to the2 antenna ports, or splits the signal to the 6RBSs in the receiving direction. This is a highly important function when desig