egi industries provides the following coating materials · coating processes for mechanical parts...
TRANSCRIPT
COATING PROCESSES FOR MECHANICAL PARTS IN NORTH AMERICA
Ceramics
This ultra-high-temperature system facilitates the application of ceramics and other materials.Ceramic coatings have excellent properties against corrosion andhigh temperature.
We repair and reconstitute metallic parts according to mechanical application tolerances. Our laboratory research and development allows us to design innovative spray processes
to provide more durable coatings with consistent quality.
EGI Industries provides the following coating materials:
Alumina oxide
Zirconium oxide
Chromium oxide
Titan oxide and other
Metals
Stainless steel
Aluminum
Copper
Brass and bronze
Hard metals
The processes we offer cansolve all kinds of wear:
Abrasion
Erosion
Friction
Corrosion
Cavitation
Insulation or electrical conductivity and otherCarbides
Tungsten carbide coatings
Chromium carbide coatings and other
HVAF PROJECTION
All types of process can use metal coatings, depending on what mechanical properties you want for your parts. However, HVAF projection allows the densest coatings on the market, exceeding conventional HVOF systems.
WIDE RANGE OF CARBIDE AND METAL COATINGS
These coatings are used to rebuild worn parts. It is also possible to rebuild a part using a metal coating, then apply a carbide finish.
METALLIZATION WITH METALLURGICAL LINKS
Through this process, we have the ability to create more flexible metallic coatings that can withstand wide temperature variations while maintaining excellent properties against corrosion and abrasion.
+1 (518) [email protected]
CONTACT US
SPECIALTY COATINGS
We are committed to developing innovative solutions for your coating requirementsand providing the highest quality coating tailored to your specific applications.
Foam
Closed cell Neoprene Foam
Closed cell Latex Foam
Closed cell Polyurethane Foam
DuPont™ Teflon®
PTFE
PFA
FEP
ETFE
Teflon S
Other
Xylan®
Halar® ECTFE
Phenolic
Carboline
Rilsan
Plastisol
Polyarmor
Plastcoat
Powder Coatings
Vinyl PVC
High Temperature Ceramic
etc…
BEFOREAFTER Success in rebuilding and re-certifying mining Valves and Pump rebuildsto higher standards than the manufacture.
Reproducing mobile equipment parts for major OEM to a higher quality standard using the latest in specialty antiware coating that exist.
Our Teflon coating on agitators are FDA food grade approved and leaveno transfer to your solution in your tanks
Our Teflon protects your agitator shafts against any chemicals
Save your equipment and reduce replacement costs with EGI