e:i shock manual english
DESCRIPTION
E:I Shock Manual ENGTRANSCRIPT
2ENGLISH
e:i shockUSER MANUAL
ENGLISH
e:i shock display functions
A. LCD LAY OUTB. GENERAL FUNCTIONSC. SETTINGSD. OTHERS FUNCTIONSE. OTHERS INFORMATIONS
3
A. LCD LAY OUT
A. LCD LAY OUT
4
1. Controllers map2. Other symbols
1. Controllers map
• Indicates average speed status. MPH or KMH
• Shows the current speed.
• Indicates current cadence.
• Shows shock mode. AUTO - OPEN - MEDIUM - LOCKED
• Indicates time.
• LCD screen shows the differents functions and settings.
5A. LCD LAY OUT
2. Other symbols
• Indicates battery status.
• Shows over or under average speed.
• Shows over or under average cadence.
• Double point in clock blinks, indicates seconds.
• Blinks when stopwatch is running.
6A. LCD LAY OUT
B. GENERAL FUNCTIONS
B. GENERAL FUNCTIONS
7
1. Function loop operation2. Reset trip3. Enter settings menu4. Settings operation5. e:i shock
set
mode
1. Function loop operation
• Press mode to switch functions in dot matrix. • 1 push = 1 step.
FUNCTIONS
8B. GENERAL FUNCTIONS
mode
2. Reset trip
• Press set for 3 seconds to reset. • Reset function works only within and for the orange marked functions below.
FUNCTIONS
3 sec.
9B. GENERAL FUNCTIONS
3. Enter settings menu
• Press both buttons for 3 seconds to enter the settings menu. Visible in lower dot matrix.
3 sec.
3 sec.
10B. GENERAL FUNCTIONS
SETTINGS
4. Settings operation
• Press mode to switch settings in dot matrix.
mode
11B. GENERAL FUNCTIONS
SETTINGS
4. Settings operation
• Press set to adjust settings.• Press mode to switch inside the setting.
set
12B. GENERAL FUNCTIONS
SETTINGS
5. e:i shock
• Switch back and forth between the different levels with the HBC (Handlebar Controller).
• Static filling of the damper symbol corresponds with the setting.
Dynamic filling of damper symbol corresponds with the activity
of the shock sensor (also sensor test).
Sensitivity for AUTO can be set in 5 levels
in settings menu.
STATIC FEEDBACK DYNAMIC FEEDBACK
13B. GENERAL FUNCTIONS
5. e:i shock
• Sensitivity for AUTO can be set in 5 levels in settings menu.• Mode AUTO 1 is the softer, AUTO 5 is the harder.• Press set to switch sensitivity levels.
LEVELS
14B. GENERAL FUNCTIONS
Soft
Hard
set
15C. SETTINGS
C. SETTINGS
1. MPH / KMH settings2. Wheel size3. Time4. Total distance5. Temperature6. e:i shock sensitivity7. Exit menu
1. MPH / KMH settings
• Press both buttons for 3 seconds to enter the settings menu. Visible in lower dot matrix.• Press mode 3 times to select the MPH / KMH menu.
SETTINGS
3 sec.
3 sec.
16C. SETTINGS
1. MPH / KMH settings
• Press set to change KMH in MPH.• User will see MPH and KMH change in the upper left corner of the screen.• Automatically, all distances in the computer will be calculated and displayed in either KMH or MPH.
SETTINGS
17C. SETTINGS
set
2. Wheel size settings
• Press mode until ‘‘ SET WHL SIZE 0000 ‘’ appears in the settings menu.
SETTINGS
18C. SETTINGS
mode
2. Wheel size settings
• Press set and the first number will start blinking.• Press mode to change the first number.• Press set to jump to the next number.• Press mode to change the second number. etc.• After the last number, press set and no numbers will blink, the size is set. Size is always in mm.
SETTINGS
19C. SETTINGS
set
mode
2. Wheel size chart
ETRTO Wheel Size mm40-559
44-559
47-559
50-559
54-559
57-559
37-590
20-571
60-559
54-622
57-622
26x1.5
26x1.6
26x1.75x2
26x1.9
26x2.00
26x2.125
26x1 3/8
26x3/4
26x2.35
29x2.1
29x2.3
2026
2051
2074
2089
2114
2133
2105
1954
2146
2288
2326
20C. SETTINGS
3. Time settings
• Press mode until ‘‘ SET TIME ‘’ appears in the settings menu.
SETTINGS
21C. SETTINGS
mode
3. Time settings
• Press set and the first number will start blinking.• Press mode to change the number.• Press set to jump to the next number.• Press mode to change the second number. Then, press set and no numbers will blink, the time is set.
SETTINGS
22C. SETTINGS
set
mode
4. Total distance settings
• Press mode until ‘‘ ODO TOTAL 00000 ‘’ appears in the settings menu.
SETTINGS
23C. SETTINGS
mode
4. Total distance settings• Press set and the first number will start blinking.• Press mode to change the number.• Press set to jump to the next number.• Press mode to change the second number. etc. After the last number, press set and no numbers will blink, the odo total is set.
SETTINGS
24C. SETTINGS
set
mode
5. Temperature settings
• Press mode until ‘‘ TEMP °C ‘’ appears in the settings menu. °C is blinking.
SETTINGS
25C. SETTINGS
mode
5. Temperature settings
• Press set to switch between °C (Celsius), °F (Fahrenheit) and OFF (Temp function not visible in function loop).• Press mode to return to main menu.
SETTINGS
26C. SETTINGS
set
mode
6. e:i shock sensitivity
• Press mode until ‘‘ SENSITIVITY 1 ‘’ appears in the settings menu.
SETTINGS
27C. SETTINGS
mode
Soft
Hard
6. e:i shock sensitivity
• Press set to change in 5 levels.• AUTO indicates the system is in auto mode and the number indicates the level of sensitivity.• Press mode to return to main menu.
SETTINGS LEVELS
28C. SETTINGS
set
mode
7. Exit menu
• Press mode until ‘‘ EXIT SETTINGS‘’ appears in the settings menu. • Press set to exit Settings Menu and to return to normal Function Loop.
SETTINGS FUNCTIONS
29C. SETTINGS
mode
set
D. OTHERS FUNCTIONS
D. OTHERS FUNCTIONS
30
1. Languages2. Timer - Stopwatch
1. Languages
• Press mode until ‘‘ ENGLISH ‘’ appears in the settings menu.
SETTINGS
31D. OTHERS FUNCTIONS
mode
• Press set to switch in the languages menu. • You can choose between ENGLISH / FRANÇAIS / DEUTSCH / ESPAÑOL / ITALIANO.• Press mode to return to settings menu.
SETTINGS
32D. OTHERS FUNCTIONS
1. Languagesset
2. Timer - Stopwatch
• Press mode until ‘‘ TIMER ‘’ appears in the functions loop menu.
33D. OTHERS FUNCTIONS
FUNCTIONS
mode
2. Timer - Stopwatch
• Press set to start the Timer. ( Icon starts blinking)• Press set to stop the Timer. ( Icon disappears)• Press set for 3 seconds to reset the Timer. ( 00:00:00:0)• Press mode to return to main menu.
34D. OTHERS FUNCTIONS
FUNCTIONS
3 sec.to reset
E. OTHERS INFORMATIONS
E. OTHERS INFORMATIONS
35
1. Battery Recommendations2. SRAM Shock Failsafe Adjuster
E. OTHERS INFORMATIONS 36
DANGER
• Do not use anything other than the special charger to charge the battery. In addition, do not use the battery for any devices other than the e:i shock series.
• Do not heat the battery or throw it into the fire.
• Do not leave the battery in places which may exceed 60°C in temperature, such as places which are exposed to direct sunlight inside vehicles on hot days or near stoves.
• Do not disassemble or modify the battery or apply solder directly to the battery terminals.
• Do not connect the terminals with metallic objects. Do not carry or store the battery together with metallic objects such as necklaces or hairpins.
• If any liquid leaking from the battery gets into the eyes, immediately wash the affected area with clean water without rubbing the eyes, and then seek medical advice.
• If any non-specified items are used, fire, overheating or leakages may occur.
• If this is not observed, fire or bursting may occur.
• If this is not observed, leakages, overheating or bursting may cause fire, burns or other injury to occur.
• If this is not observed, leakages, overheating or bursting may cause fire, burns or other injury to occur.
• If this is not observed, short-circuits, overheating, burns or other injury may occur.
• If this is not done, blindness may occur.
The following instructions must be observed at all times in order to prevent personal injury and physical damage to equipment and surroundings.
1. Battery Recommendations
• Failure to follow the instructions will result in death or serious injury.
E. OTHERS INFORMATIONS 37
1. Battery RecommendationsWARNING
• If charging is not complete after 1.5 hours of charging time has elapsed, stop the charging.
• Do not place the battery into fresh water or sea water, and do not allow the battery terminals to get wet.
• The operating temperature ranges for the battery are given below. Do not use the battery in temperatures outside these ranges: 1. During discharge: -10°C – 55°C 2. During charging: 0°C – 45°C 3. During storage (less than one year): -20°C – 35°C
• Do not use the battery if it has any noticeable scratching or other external damage.
• Do not subject the battery to strong shocks or throw it.
• Do not use the battery if leakages, discoloration, deformation or any other abnormalities occur.
• If any leaked fluid gets on your skin or clothes, wash it immediately with clean water. The leaked fluid may damage the skin.
• If this is not observed, fire, bursting or overheating may occur.
• If this is not observed, fire, bursting or overheating may occur.
• If the battery is used or stored in temperatures which are outside these ranges, fire, injury or problems with operation may occur.
• If this is not observed, bursting, overheating or problems with operation may occur.
• Failure to follow the instructions could result in death or serious injury.
E. OTHERS INFORMATIONS 38
1. Battery Recommendations
CAUTION
• Store the battery in a safe place away from the reach of infants and pets.
• If not using the battery for long periods, remove it and store it away in a safe place.
• Inform yourself about the disposing of used batteries. Batteries do not belong in the trash.
• Failure to follow the instructions could cause personal injury or physical damage to equipment and surroundings.
E. OTHERS INFORMATIONS 39
• If the shock motor ceases to function (i.e. battery dies, wire cut ...), it will remain in the mode it was in when it stopped.
• To adjust the shock mode, use a 2 mm hex wrench on the failsafe adjuster bolt to manually set the shock to either the open or lock mode.
• If the failsafe adjuster bolt cannot be accessed, unbolt the shaft eyelet according to your bicycle manufacturer’s instructions.
• Manually adjust the shock to either the open or lock mode using the failsafe adjuster bolt, then reinstall the shaft eyelet according to your bicycle manufacturer’s instructions.
2. Failsafe Adjuster
CONTACTS
39CONTACTS
GHOST-BIKES GMBHAN DER TONGRUBE 3D - 95652 WALDSASSEN
HaIBIKE Winora-Staiger GmbHMAx-PLANck-STR. 697526 SENNfELD - POSTfAch 1422D - 97404 SchWEiNfURT
CYCLES LaPIERRERUE EDMOND VOiSENETBP 5057321005 DiJON cEDEx
TEL. +49 (0) 9632 92 55-0fAx. +49 (0) 9632 92 [email protected]
WWW.GHOST-BIKES.COM
TEL. +49 (0) 9721 65 01-0fAx. +49 (0) 9721 65 94-45
TEL. +33 (0) 380 525 186 fAx. +33 (0) 380 520 851