ejot fastening solutions for the building technology

44
EJOT ® fastening solutions for the building technology

Upload: others

Post on 21-Dec-2021

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: EJOT fastening solutions for the building technology

EJOT® fastening solutions for the building technology

Page 2: EJOT fastening solutions for the building technology

2

Content

Page 3: EJOT fastening solutions for the building technology

3

Content

Content

Fasteners for the building technology

EJOFAST® self-drilling screw JF2-4.2 (steel)......................................... Page 11

Drop-in anchor LAL+ ........................................................................... Page 13

Setting tool for drop-in anchors LAL+ .................................................. Page 13

Screw anchor TSM 6x40 SW13 ........................................................... Page 14

Screw anchor TSM 6x35 vz M8/M10 ................................................... Page 15

Metal anchor MOLA ............................................................................ Page 16

Dry construction anchor KLA ............................................................... Page 17

Ceiling nail .......................................................................................... Page 18

Injection technology

Injection resin Multifix PSF ................................................................... Page 22

Injection resin Multifix VSF.................................................................... Page 23

Injection resin Super Epoxy SE 800 ..................................................... Page 24

Anchor rod AST ................................................................................... Page 25

Sleeves ................................................................................................ Page 25

Injection system accessories ............................................................... Page 24

Anchor bolts

EJOT® anchor bolt BA-V ...................................................................... Page 29

EJOT® anchor bolt BA-F ...................................................................... Page 30

EJOT® anchor bolt BA-E ...................................................................... Page 31

Facade anchors & nail anchors

EJOT® facade anchor SDF-KB-8V ...................................................... Page 34

EJOT® facade anchor SDF-KB-10V ..................................................... Page 35

EJOT® facade anchor SDF-KB-10H .................................................... Page 36

EJOT® facade anchor SDF-KB-14A ..................................................... Page 37

EJOT® facade anchor SDP-KB-10G .................................................... Page 38

Nail anchor ND-K ................................................................................ Page 39

Notes .................................................................................................. Page 40

Legal notice ......................................................................................... Page 42

International contact ............................................................................ Page 43

Page 4: EJOT fastening solutions for the building technology

4

The Fastener.

Fastening technology for the building industryThe EJOT Construction Division caters to selected segments of the building indus-try with professional applications on facades. EJOT offers a broad product range and special expertise in fastening solutions.

The aspiration to high product quality is not an

end in itself for EJOT. Indeed, the user benefits

from our screws and anchors. And so reliable

installation also means low failure costs for

the customer. Moreover, durable quality joints

provide the best protection against expensive

customer complaints. This is why we will conti-

nue to manufacture our strategic product lines

to the highest quality standards in our plants,

which are certified to ISO/TS 16949.

Our services include outstanding logistics and

availability of products, qualified advice for

product selection, as well as professional pro-

cessing. We convey to our customers expert

knowledge about the use our products.

And if needs be, we are on hand with advice

and support for fastening systems. Further

service includes advice over the telephone,

application advice on site, initial sizing, compo-

nent tests in the EJOT test centre and a com-

prehensive training programme for architects,

specifiers and assemblers.

Innovative products are the key to success.

We leave nothing to chance. We identify our

customers' needs in-situ under real conditions

on the job site. Communication from the

market and about market requirements to

the development departments is ensured by

regular meetings between our technical experts

and specialists and users from the international

building industry. This is how we develop

innovative product solutions that have a clear

added value and inspire customers.

Bi-met screws manufacturing location"In der Aue", Bad Laasphe factory

Page 5: EJOT fastening solutions for the building technology

5

The Fastener.

Experience and innovationChallenging fastening jobs call for competence and expert knowledge. No matter whether the construction of the highest tower or the southernmost polar station in the world - you benefit from over 30 years' of expertise in fastening systems for the building envelope.

Industrial lightweight constructionHigh-quality fasteners for fixing profiled sheets

and sandwich panels in the industrial light-

weight construction sector

External Thermal Insulation Composite SystemsSpecial anchors for fixing insulation on external

wall systems

Flat roofingFasteners and installation tools for the mecha-

nical fixing of insulation and roofing membra-

nes to flat roofs and slightly sloping roofs.

Rear ventilated facadesFastening, fixing and embedding elements for

fixing substructures and facade cladding of

rear ventilated systems

Industrial window and facade technologyHigh-quality fasteners for window and door

production and for use in aluminium/glass

facade systems

Solar Fastening technology for solar applications

One thing applies to all EJOT products:They were developed by experienced fastening

specialists. A strong team of developers, pro-

duct managers and application engineers.

We aspire to create solutions that meet your

requirements. The results are reliable product

solutions that simplify your work on the job

site. Everyone can sell products - but we can

meet your needs.

Page 6: EJOT fastening solutions for the building technology

6

The Fastener.

Technical support by EJOT

Providing total confidence ON-SITEFor safety-relevant fixing in undefined or old masonry substrates, the EJOT team highly recommends an anchor pull-out test for drawing conclusions about the load capacity of the substrate and for choosing the right fastener.

The reason for this is simple.

Whilst we can be wholly confident that our

products will deliver maximum performance,

we believe that no one should second guess

the integrity of substrates. Where high loads

in critical structural components present a

EJOT® engineer’s testing and report service

Far more than simply "added value"No matter whether the inspection is instigated

by us, the installation engineer, the contractor

or the structural engineer - we formally agree

a time and date for the job site inspection.

In the run-up, our technical team gathers

information and creates a short yet concise

report to ensure our engineer is fully briefed.

With site-induction cleared, the tests are

carried out according to standard procedures

developed by EJOT’s technical support teams

globally. As a result, our engineers are fully-

briefed on all products, substrates, and the

impact of climatic conditions.

Within the building, fasteners are installed

at various heights and test points are then

identified. The pull-out force up to failure of the

substrate is then tested in each area.

potential risk, we want our customers to have

absolute peace of mind and confidence in the

match between fixing and substrate – and the

correct installation process.

At the end, our engineers write a report. The

data provide an average result that will enable

any structural engineer to compare loads

against the requisite European Technical Ap-

proval specifications.

Page 7: EJOT fastening solutions for the building technology

7

The Fastener.

On-site test process

The engineers identify multiple test points within the building. The latest portable anchor extraction devices are used to check the substrate at the test points to establish the failure point.

DefinitionDetermination of load capacity values in un-

defined or old substrates in the roof or on the

wall, with tensile tests on the building followed

by recording in a test report and a recommen-

dation for the proper fastener.

ServicesTravel to and from, testing and recording

Requirements l Completed questionnaire with information

on the building and the local points of

contact

l The test site must be accessible and

secured

l Any necessary re-sealing work must be

carried out by the contractor

The benefits to you: l Pull-out tests by specially trained

EJOT® staff

l Use of calibrated test equipment

l Determination of the load values

l Provision of a test report

l Advice and evaluation of the test results

Page 8: EJOT fastening solutions for the building technology

8

The Fastener.

Our Applitec Centre works in partnership with numerous

OEM’s, all of whom pursue the integrated aim of deve-

loping even better and more efficient products for the

building trade.

Technical support by EJOT

Providing total support OFF-SITEAPPLITEC - it’s derived from two words; Application Technology. EJOT APPLITEC is at the heart of everything we do worldwide; design, origination, testing and manufacturing progressive fastening systems that provide high installation performance and longevity in application.

Recreating on-site conditions for problem solving off-site

able to replicate conditions off-site – providing a resour-

ce of immeasurable value.

There are many different scenarios in which the Applitec

team can define or resolve a specific issue. In many

cases, this will be related to installation omissions or

substrate inconsistencies. Either way, the EJOT laborato-

ry is equipped with highly sophisticated equipment and

has the technical capability required to recreate and test

virtually any scenario, during or prior to installation.

Testing reports compiled by Applitec technicians can

enable structural engineers to determine if an incorrect

installation is still fit for purpose.

Equally, where there is any doubt surrounding subs-

trates, test conditions can be created as a means of

forecasting performance.

When customers need support with technical issues on-site, particularly

where there are structural implications, our team of Applitec technicians are

Page 9: EJOT fastening solutions for the building technology

9

The Fastener.

Page 10: EJOT fastening solutions for the building technology

10

Fasteners for the building technology

EJOFAST® screwsFast. No swarf. Reliable. The EJOFAST® screws are self-drilling screws without the classic cutting bit. Thanks to the innovative point geometry and special thread shape, the EJOFAST® screw not only fastens without any swarf and at high speed, it also has excellent retention properties.

Self-drilling screws with innovative point geometry

EJOFAST®

JF2-4.2EJOFAST®

Side lap screw JF2EJOFAST®

Side lap screw JF3

EJOFAST®

Thin sheet metal screw JF3

EJOFAST®

Wood screw JF3

MaterialSteel

Case-hardened zinc-plated

Steel Case-hardened

zinc-plated

A2 stainless steelwith hardened

steel point

A2 stainless steelwith hardened

steel point

A2 stainless steelwith hardened

steel point

For components from Steel SteelSteel

or aluminiumSteel

or aluminiumSteel

or aluminium on timber

Max. drilling capacity of steel[mm]

0.75 + 0.75 0.88 + 0.88 0.88 + 0.88 1.0 + 1.0 0.88

Ø [mm] 4.2 4.8 4.8 5.5 6.8

EJOFAST® product range overview

4

2

6

1

3

5

Free Spin Zone for a locked joint according to the latest IFBS assembly guidelines (only side lap screws)

Innovative screw point geome-try for skid-free application and no-swarf fixing

Hexagon drive

Asymmetrical screw thread for high pull-out strength

(except JF2-4.2xL)

Double-start thread for extremely high-speed fastening

(except thin sheet metal screws)

JF3-5.5 and JF3-6.8

Optional bonded washer made of zinc-plated steel or stainless steel with vulcanised elastomer, very good weather and UV resis-tance.

Page 11: EJOT fastening solutions for the building technology

Fasteners for the building technology

11

Application range For the efficient connection of steel air ducts

Properties l Fastening without swarf

l Swarf does not need to be cleaned from the

ventilation ducts

l Case-hardened steel, zinc lamella coating

l Innovative screw point geometry

l Non-skid application

Ø [mm]

Length [mm]

Clamp thickness [mm]

PU Order description Article number

4.2 13 0-5 1,000 JF2-2-4.2x13 7 381 300 609

4.2 16 0-8 1,000 JF2-2-4.2x16 7 381 600 609

EJOFAST® self-drilling screw JF2-2-4.2

Technical specifications

Drilling capacity tI + tII 0.75 + 0.75 mm

Drive Hexagon AF7

AF7

J2

Page 12: EJOT fastening solutions for the building technology

12

Fasteners for the building technology

Page 13: EJOT fastening solutions for the building technology

Fasteners for the building technology

13

Application range l For use as single fastener according to

ETAG 001; Part 4 in non-cracked concrete

(see ETA-13/0442)

l For use as a multiple fastener in non-

supporting systems in cracked and non-

cracked concrete, e.g. suspension systems,

pipelines, air ducts, sprinkler systems,

cable racks, machines, supports and ceiling

beams (see ETA 13/0441)

l Also suitable for reinforced concrete hollow

floor, natural stone and brick

l Suitable for dry indoor areas

Properties l With collar, steel, galvanized zinc-plated

l Internal thread for metric screws and rods

l The suitable bolt length is 1-1.5 x nominal

anchor length + component thickness

l The smallest required drill hole depth

facilitates drilling and overhead mounting

Drop-in anchor LAL+ Galvanized zinc-plated steel, with collar

Ø[mm]

Length [mm]

PU Order description Article number

10 30 100 Drop-in anchor LAL+8 9 650 070 072

12 40 100 Drop-in anchor LAL+10 9 650 070 074

Characteristic values LAL+8 LAL+10

Outside diameter of sleeve dnom 10 mm 12 mm

Inside diameter of thread 8 mm 10 mm

Nominal drill diameter d0 10 mm 12 mm

Effective Embedment depth hef 30 mm 40 mm

Max. installation depth Ls, max 13 mm 16 mm

Max. installation depth Ls, min 8 mm 10 mm

Through hole diameter in the attached part df

9 mm 12 mm

Max. locating torque max. Tinst 8 Nm 15 Nm

Setting tool for drop-in anchors LAL+

PU Order description Article number

Setting tool for drop-in anchors LAL+8 9 900 102 975

Setting tool for drop-in anchors LAL+10 9150 001 040

Application range l For fast and reliable installation of

hammer-in anchor LAL+8 and LAL+10

l For making the drill hole

Note l The use of specially developed setting tools

is highly recommended for installing drop-in

anchors

l Drop-in anchors cannot be tightened by a

screw or bolt!

l If makeshift tools instead of professional

setting tools are used to install anchors,

the thread can be damaged and this causes

problems during installation.

ApprovalETA-13/0441ETA-13/0442

Performance data LAL+8 LAL+10

Non-cracked concrete C20/25 NRec

3.6 kN 4.8 kN

Non-cracked concrete C20/25 VRec

3.1 kN 4.5 kN

Page 14: EJOT fastening solutions for the building technology

14

Fasteners for the building technology

Application range l For use as single fastener according to

ETAG 001; Part 3 in cracked and non-

cracked concrete (see ETA-15/0514)

l For use as a multiple fastener for non-

supporting systems in cracked and non-

cracked concrete and reinforced concrete

hollow-slab ceilings (see ETA-16/0123)

l Suitable for natural stone with compact

structure

l For fastening pipelines, ceiling brackets,

handrail brackets, shelves in high rack

warehouses, ventilation ducts and timber

substructures

Properties l Fast and reliable installation

l High load-bearing capacity in cracked and

non-cracked concrete

l Load transfer through free spin zone

l Complete removal if required

l Immediately resilient

Characteristic values

Min. drill hole depth 40 mm

Min. embedment depth 35 mm

Max. fastening height 5 mm

Screw anchor 6x40 SW13Hexagon head with flange

Ø[mm]

Length [mm]

PU Order description Article number

7.5 40 100 Screw anchor TSM 6x40 SW13 9 560 136 040

ApprovalETA-15/0514ETA-16/0123

Page 15: EJOT fastening solutions for the building technology

Fasteners for the building technology

15

Application range l For use as single fastener according to

ETAG 001; Part 3 in cracked and non-

cracked concrete (see ETA-15/0514)

l For use as a multiple fastener for non-

supporting systems in cracked and non-

cracked concrete and reinforced concrete

hollow-slab ceilings (see ETA-16/0123)

l Suitable for natural stone with compact

structure

l For fastening pipelines, ceiling brackets,

ventilation ducts and timber substructures

Properties l Fast and reliable installation

l High load-bearing capacity in cracked and

non-cracked concrete

l Variable internal thread for metric screws

and rods M8 and M10

l Load transfer through free spin zone

l Complete removal if required

l Immediately resilient

Characteristic values

Min. drill hole depth 40 mm

Min. embedment depth 35 mm

Screw anchor 6x35 vz M8/M10Countersunk head with metric internal thread

Ø[mm]

Length [mm]

PU Order description Article number

7.5 35 100 Screw anchor TSM 6x35 vz M8/M10 9 560 006 035

ApprovalETA-15/0514ETA-16/0123

Page 16: EJOT fastening solutions for the building technology

16

Fasteners for the building technology

Application range l Solid metal anchor with arms spreading out

and resting firmly on the back of the plate

l Suitable for fastening heavier loads acc.

to the characteristics of the sheet

l Suitable for areas where fire resistance is

required

Properties l The attached part can be removed and

replaced by loosening the screw

l Attach the anchor using a screwdriver or

with the MOLA special gripper

(Art. No.: 9 650 079 101)

l For dry indoor areas and outdoor areas for

limited periods.

Characteristic values for MOLA 6/13 gvz

Drill hole diameter do 12 mm

Max. clamp thickness Tfix 13 mm

Characteristic values for MOLA 6/26 gvz

Drill hole diameter do 12 mm

Max. clamp thickness Tfix 21 mm

Drywall anchor MOLAZinc-plated steel with flange

Length [mm]

PU Order description Article number

45 100 Drywall anchor MOLA 6/13 gvz 9 650 075 710

72 100 Drywall anchor MOLA 6/26 gvz 9 650 075 711

Page 17: EJOT fastening solutions for the building technology

Fasteners for the building technology

17

Application range l Self-tapping fast anchor for fastening in

drywall

l Fireproof self-tapping anchor for standard-,

double and composite walls made of

plasterboard

l For fastening electrical installations, for

example

Properties l The fastest method for fastening lightweight

objects. No special tools required, a PZ2

screwdriver suffices. Attach flush with the

board surface, do not over-tighten

l Equipped with a 4.5x35 mm screw, ZP. Can

also be used with other self-tapping wood

and chipboard screws, hook bolts and

eyelets screws.

l For dry indoor areas and outdoor areas for

limited periods

Characteristic values

Max. clamp thickness Tfix 12 mm

Min. sheet thickness Tsheet, min 9 mm

Drywall anchor KLA

Galvanized zinc-plated steel

Length [mm]

PU Order description Article number

31 100 Drywall anchor KLA - metal 9 650 075 920

Installation note l To fasten plasterboards and plasterboard

double walls, pre-drill with an 8 mm drill

Page 18: EJOT fastening solutions for the building technology

18

Fasteners for the building technology

Application range l For use as a multiple fastener of non-

supporting systems in concrete.

l Approved for concrete strengths from

C20/25 to C50/60

Properties l Multiple fastening

l High load bearing capacity in cracked and

non-cracked concrete

l Small drill holes

l Fast and reliable installation

Characteristic values without fire exposure

Drill hole diameter do 6 mm

Drill hole depth ≥ h1 40 mm

Embedment depth ≥ hef 32 mm

Min. component thickness hmin 80 mm

Edge distance cmin 150 mm

Centre distance smin 200 mm

Max. attached part thickness tfix 5 mm

Height of the attached part ≤ tfix 5 mm

Ceiling nailGalvanized zinc-plated steel

Ø[mm]

Length [mm]

PU Order description Article number

6 35 100 Ceiling nail T-DN 6-35 9 700 050 035

ApprovalETA-06/0259

Page 19: EJOT fastening solutions for the building technology

19

Notes

Page 20: EJOT fastening solutions for the building technology

20

Fasteners for the building technology

EJOT® chemical anchorsMortar cartridge for embedment of anchor rods indoors and outdoors with high load capacity and safety requirements Ideal for meeting the requirement for low axis and edge distances

Application range l Bridge construction

l Balcony railings

l Tunnel construction

l Building technology

Advantages l Can be used in water-filled drill holes

l A drill hole sealed with mortar protects the

reinforcements in the concrete against per-

manent wetness

l No spreading, enabling minimal axis and

edge distances

l Ideal for perforated brick

Minimal edge distance

Expansion pressure freeApprovalETA-13/0918 ETA 15/0282ETA 15/0287ETA-15/0342

Page 21: EJOT fastening solutions for the building technology

Fasteners for the building technology

21

Page 22: EJOT fastening solutions for the building technology

22

Fasteners for the building technology

EJOT® Injection resin Multifix PSFPolyester based Injection resin, styrene free

ApprovalETA-15/0342ETA 15/0287

Content [mm]

Composite mortar PUPrice/1

[EUR]Order description Article number

410 Polyester, styrene free EJOT Multifix PSF 9 570 000 410

Order information: Also available in 300 ml.

Application area l Suitable for masonry blocks (solid and

hollow)

l Approval for threaded rods in

concrete: M8, M10, M12, M16

solid masonry: M8, M10, M12

hollow masonry: M10

DescriptionTwo-component injection chemical anchor

based on polyester resin without styrene and

low odor.

Characteristics l For medium loads

l Good durability

l Without styrene, low odor

l Ideal for indoor and outdoor applications

l Fast curing

l Universal purpose

l Suitable also for colder environments

Certification l ETA-15/0342 for Masonry

l ETA 15/0287 for Concrete Option 7

l VOC classification A+

NoteFor details/questions please check with

technical department

Working and hardening times

-10* 50’ 4h 8h

-5 40’ 3h 6h

5 20’ 1h30’ 3h

15 9’ 1h 2h

25 5’ 30’ 1h

35 3’ 20’ 40’

*Resin temperature must be at least 20 °CFull cure 24 hoursAll specifications based on supplied mixer

4x

4x

4x

4x

2x

4x

Page 23: EJOT fastening solutions for the building technology

Fasteners for the building technology

23

Application area l Suitable to anchor threaded rods and rebar

in cracked and non-cracked concrete.

l Approval for threaded rods M8, M10, M12,

M16, M20, M24

Description Two-component injection chemical anchor

based on vinylester resin without styrene and

low odor.

Characteristics l For high and critical loads

l High durability

l Without styrene, low odor

l Ideal for indoor and outdoor applications

l Fast curing

l Suitable for underwater applications

l Dynamic resistance

l Fire rated

l For use with potable water

Certification l ETA 15/0282 for Concrete

Option 1 and Rebar

l VOC classification A+

l BS6920 Approved

NoteFor details/questions please check with

technical department

EJOT® Injection resin Multifix VSFVinylester, styrene free

Content [mm]

Composite mortar PUPrice/1

[EUR]Order description Article number

410 Vinylester, styrene free EJOT Multifix VSF 9 571 000 410

Order information: Also available in 300 ml.

ApprovalETA 15/0282

Working and hardening times

-10* 50’ 4h 8h

-5 40’ 3h 6h

5 20’ 1h30’ 3h

15 9’ 1h 2h

25 5’ 30’ 1h

35 3’ 20’ 40’

*Resin temperature must be at least 20 °CFull cure 24 hoursAll specifications based on supplied mixer

4x

4x

4x

Page 24: EJOT fastening solutions for the building technology

24

Fasteners for the building technology

EJOT® Injection resin Super Epoxy SE 800Pure Epoxy Injection Mortar

Content [mm]

Composite mortar PUPrice/1

[EUR]Order description Article number

400 Pure epoxy EJOT Super Epoxy SE 800 9 570 000 400

ApprovalETA-13/0918

Application area l Suitable for stone, rod and rebar connection

l Approval for threaded rods M8, M10, M12,

M16, M20

l Approval for rebar Ø 8 – Ø 32 mm

DescriptionTwo component injection chemical anchor

based on pure epoxy resin for high perfor-

mance and structural applications.

Characteristics l For high loads

l No shrinkage

l Useable in wet and flooded environments

l High chemical and temperature resistance

l Useable with diamond drilled holes

l Dynamic and long term loads resistance

l Fire resistance classification

l Suitable for warmer/hot regions

Certification l ETA 13/0918

l VOC classification A+

Working and hardening times

5 1h 33h 50h

10 50’ 24h 36h

20 30’ 6h 9h

30 15’ 4h 6h

40 8’ 3h 4h

Minimum resin temperature for injection: +10 ºC Minimum concrete temperature for injection: +5 ºC

4x

4x

4x

Page 25: EJOT fastening solutions for the building technology

Fasteners for the building technology

25

Application area l For embedment in concrete and solid brick

l For installation in perforated brick in con-

nection with mesh sleeve

Properties AST steel l Anchor rod: strength grade 5.8 or 6.8

acc. to EN ISO 898-1

l Nut: strength grade 5 or 6

acc. to EN 20898-2

l Washer: acc.to EN ISO 7089

Anchor rod ASTapproved for polyester and vinyl ester composite mortar

ThreadLength

[mm]

min. embed-

ment depth in concrete

[mm]

min. embed-

ment depth in solid

brick [mm]

Drill hole diameter

Concrete/solid brick [mm]

PUPrice/100

[EUR]Order description Article number

Zinc-plated steel

M8 110 60 80 10 10 AST M8x110-V 9 570 098 110

M10 130 70 85 12 10 AST M10x130-V 9 570 910 130

M12 160 80 95 14 10 AST M12x160-V 9 570 912 160

M16 190 100 - 18 10 AST M16x190-V* 9 570 916 190

A4 stainless steel

M8 110 60 80 10 10 AST M8x110-E 9 571 098 110

M10 130 70 85 12 10 AST M10x130-E 9 571 910 130

M12 160 80 95 14 10 AST M12x160-E 9 571 912 160

M16 190 100 - 18 10 AST M16x190-E* 9 571 916 190

*No approval for embedment in solid brick masonryOrder information: Further lengths ant threads upon request.

Properties AST stainless steel A4 (1.4401 / 1.4571)

l Anchor rod: EN 10088; strength grade 70

(A4-70) acc. to EN ISO 3506

l Nut: EN 10088; strength grade 70

(A4-70) acc. to EN ISO 3506

l Washer: acc. to EN 10088

NoteTo determine the characteristic load-carrying

capacity in concrete the approval ETA-14/0121

has to considered. To determine the charac-

teristic load-carrying capacity in solid and

perforated brick the approval ETA-0092 has to

be considered.

Drill-hole diameter [mm]

Hole depth t ≤ mm

for threaded

rodPU

Price/10[EUR]

Order description Article number

12 50 M8, M10 10 Sleeve 12x50 9 570 012 050

12 80 M8, M10 10 Sleeve 12x80 9 570 012 080

16 85 M16 10 Sleeve 16x85 9 570 016 085

16 130 M16 10 Sleeve 16x130 9 570 016 130

20 85 M20 10 Sleeve 20x85 9 570 020 085

Sleeves

Application area l Indispensable for hollow masonry applica-

tions.

Characteristics l Once the resin has been injected, the cap

holds the fixing centered.

Page 26: EJOT fastening solutions for the building technology

26

Fasteners for the building technology

EJOT® anchor boltAnchor bolt for installation of metal and wooden structures into concrete (facade, ceiling and floor). Meets high requirements for load capacity and safety. The anchor bolt is a true allrounder due to the range of possible applications and the availability of many different sizes.

Application Examples l Building technology

l Escalators

l Elevators

Advantages l Direct application of loads

l Setting tools for overhead installation

l Hot dip zinc plated version available

l EJOT dimensioning tool

ApprovalETA-14/0219

Fire ratingF30F60F90F120

Highly corrosion resistant

High load capacity

Page 27: EJOT fastening solutions for the building technology

Fasteners for the building technology

27

Page 28: EJOT fastening solutions for the building technology

28

Fasteners for the building technology

Anchor bolt range BA-V and BA-E

Punched bolt head prevents

thread destruction while

hammering.

Nut and washer are standar-

dised components.

The threaded body has been cold-

forged to guarantee a precision, high-

performance thread.

Marking indicates the size

of the anchor bolt and the

maximum fastening thick-

ness.

Active knurls ensure a good

grip and quick tightening of

the anchor.

The cylindrical shape of the cone at

the lower end allows controlled re-

expansion.

The curvature

permits anchor

insertion through

fixtures such as

timber.

A chamfered lower end of the sleeve

prevents jamming between the cone

and the sleeve.

A technically perfected

expansion sleeve.

Page 29: EJOT fastening solutions for the building technology

Fasteners for the building technology

29

EJOT® anchor bolt BA-VGalvanized zinc-plated steel

ApprovalETA-14/0219

Application range l For embedment in cracked and non-

cracked concrete ≥ C20/25

l Dry indoor areas

Properties l Galvanized zinc-plated steel

l Approval for concrete, option I

l Fire resistance classes

F30, F60, F90, F120

Type of anchor

Design load Fper. [kN]

Centre distance [mm] Edge distance [mm] Permissible bending moment [Nm]

Tightening torque MD [Nm]Scr, N S min C Ccr, N C min S

BA-V-8 2.0 135 50 50 68 50 50 10.0 20

BA-V-10 3.6 180 55 80 90 50 100 22.9 35

BA-V-12 4.8 210 60 90 105 55 145 34.3 50

BA-V-16 9.5 255 70 120 128 85 150 88.6 120

Ø d0 [mm]

Length L [mm]

Fasteningthickness tfix

≤ [mm]

Drill hole depth h1 ≥

[mm]

Embedment depth hef ≥

[mm]PU Order description Article number

BA-V-8

8 72 10 60 45 50 BA-V-8/10 9 650 001 112

8 92 30 60 45 50 BA-V-8/30 9 650 001 114

8 112 50 60 45 40 BA-V-8/50 9 650 001 116

8 147 85 60 45 40 BA-V-8/85 9 650 001 118

BA-V-10

10 92 10 75 60 40 BA-V-10/10 9 650 001 132

10 102 20 75 60 25 BA-V-10/20 9 650 001 135

10 112 30 75 60 25 BA-V-10/30 9 650 001 136

10 132 50 75 60 25 BA-V-10/50 9 650 001 137

10 162 80 75 60 25 BA-V-10/80 9 650 001 139

BA-V-12

12 103 5 90 70 20 BA-V-12/5 9 650 001 150

12 118 20 90 70 20 BA-V-12/20 9 650 001 152

12 128 30 90 70 20 BA-V-12/30 9 650 001 153

12 163 65 90 70 20 BA-V-12/65 9 650 001 155

12 178 80 90 70 20 BA-V-12/80 9 650 001 157

BA-V-16

16 138 20 110 85 10 BA-V-16/20 9 650 001 171

Order information: Other dimensions upon request

NoteCharacteristic values apply to the compression

strength of C20/25 concrete. Design load of an

anchor for centric tension in cracked concrete.

F30F60F90F120

Page 30: EJOT fastening solutions for the building technology

30

Fasteners for the building technology

EJOT® anchor bolt BA-FHot dip zinc plated steel

ApprovalETA-14/0219

Application range l For embedment in cracked and non-

cracked concrete ≥ C20/25

l Dry indoor areas

l For embedment of medium heavy to heavy

fixings indoors, such as pillars, metal

structures and wooden structures

Properties l Hot dip zinc plated steel

l Approval for concrete, option I

l Fire resistance classes

F30, F60, F90, F120

l For increased corrosion protection

Type of anchor

Design load Fper. [kN]

Centre distance [mm] Edge distance [mm] Permissible bending moment [Nm]

Tightening torque MD [Nm]Scr, N S min C Ccr, N C min S

BA-F-8 2.0 135 50 50 68 50 50 10.0 15

BA-F-10 3.6 180 55 80 90 50 100 22.9 35

BA-F-12 4.8 210 60 90 105 55 145 34.3 50

BA-F-16 9.5 255 70 120 128 85 150 88.6 120

Ø d0 [mm]

Length L [mm]

Fasteningthickness tfix

≤ [mm]

Drill hole depth h1 ≥

[mm]

Embedment depth hef ≥

[mm]PU Order description Article number

BA-F-8

8 72 10 60 45 50 BA-F-8/10 9 650 003 112

8 92 30 60 45 50 BA-F-8/30 9 650 003 114

8 112 50 60 45 40 BA-F-8/50 9 650 003 116

BA-F-10

10 92 10 75 60 40 BA-F-10/10 9 650 003 132

10 102 20 75 60 25 BA-F-10/20 9 650 003 135

10 112 30 75 60 25 BA-F-10/30 9 650 003 136

10 132 50 75 60 25 BA-F-10/50 9 650 003 137

BA-F-12

12 118 20 90 70 20 BA-F-12/20 9 650 003 152

12 128 30 90 70 20 BA-F-12/30 9 650 003 153

12 163 65 90 70 20 BA-F-12/65 9 650 003 155

12 178 80 90 70 20 BA-F-12/80 9 650 003 157

Order information: Other dimensions upon request

NoteCharacteristic values apply to the compression

strength of C20/25 concrete. Design load of an

anchor for centric tension in cracked concrete.

F30F60F90F120

Page 31: EJOT fastening solutions for the building technology

Fasteners for the building technology

31

EJOT® anchor bolt BA-EStainless steel A4 (stainless steel HCR on request)

ApprovalETA-14/0219

Application range l For embedment in cracked and non-

cracked concrete ≥ C20/25

l Dry indoor areas

l Wet areas

l Outdoors, including in industrial atmos-

pheres and coastal environments

l HCR (1.4529) anchor for embedment in

chlorinated atmosphere available upon

request

Properties l A4 stainless steel

l Approval for concrete, option I

l Fire resistance classes

F30, F60, F90, F120

Type of anchor

Design load Fper. [kN]

Centre distance [mm] Edge distance [mm] Permissible bending moment [Nm]

Tightening torque MD [Nm]Scr, N S min C Ccr, N C min S

BA-E-8 2.0 135 50 50 68 50 50 10.5 20

BA-E-10 3.6 180 55 80 90 50 100 21.4 35

BA-E-12 4.8 210 60 90 105 55 145 37.6 70

BA-E-16 9.5 255 70 120 128 85 150 95.2 120

NoteCharacteristic values apply to the compression

strength of C20/25 concrete. Design load of an

anchor for centric tension in cracked concrete.

Ø d0 [mm]

Length L [mm]

Fasteningthickness tfix

≤ [mm]

Drill hole depth h1 ≥

[mm]

Embedment depth hef ≥

[mm]PU Order description Article number

BA-E-8

8 72 10 60 45 50 BA-E-8/10 9 650 005 112

BA-E-10

10 92 10 75 60 40 BA-E-10/10 9 650 005 132

10 112 30 75 60 25 BA-E-10/30 9 650 005 136

10 132 50 75 60 25 BA-E-10/50 9 650 005 138

BA-E-12

12 103 5 90 70 20 BA-E-12/5 9 650 005 150

12 118 20 90 70 20 BA-E-12/20 9 650 005 152

12 128 30 90 70 20 BA-E-12/30 9 650 005 154

Order information: Other dimensions upon request

F30F60F90F120

Page 32: EJOT fastening solutions for the building technology

32

Fasteners for the building technology

Chamberlain Hall Student Residen-

ces, University of Birmingham, UK.

This £42 million development utilises

Kingspan’s framing systems, Bench-

mark copper panels and ceramic

terracotta facade.

Image courtesy of Speedclad Ltd, Northallerton North Yorkshire

Page 33: EJOT fastening solutions for the building technology

Fasteners for the building technology

33

EJOT® facade anchorPlastic anchors for multiple structural fixing or embedment of non-load-bearing systems according to ETAG 020 for all common substrate. Particularly suitable for high bending moment requirements.

Application range l Facade systems

l Metal wall brackets

l Timber substructure

l Awnings, stairs

l Bracing, pillars

Advantages l High bending moment and high load

capacity

l Increased safety lock against torsion of the

anchor

l Small setting depths

l Very broad length range

ApprovalETA-10/0305 ETA-12/0502 ETA-15/0027 ETA-15/0387

High load capacity

High bending moment

Page 34: EJOT fastening solutions for the building technology

34

Fasteners for the building technology

Application range l For embedment of metal substructures in

solid brick masonry and concrete

Properties l Hexagon head with flange

l Small drill-hole diameter

l Thermal and electrical isolation

l Product identification through different

sleeve colours

NoteFor planning and processing, please observe

ETA-15/0387

EJOT® facade anchor SDF-KB-8Vwith hexagon head

Characteristic values

Drive Hexagon A/F10

Drill hole depth ≥ h1 60 mm

Embedment depth ≥ hnom 50 mm

Ø [mm]

Anchor length L [mm]

Fasteningthickness B

≤ [mm]PU Order description Article number

Anchors with steel screws with zinc-plated Cr(VI)-free coating (-V)

8 60 10 100 SDF-KB-8Vx60-V 8 570 060 430

8 80 30 100 SDF-KB-8Vx80-V 8 570 080 430

8 100 50 100 SDF-KB-8Vx100-V 8 570 100 430

8 120 70 100 SDF-KB-8Vx120-V 8 570 120 430

8 140 90 100 SDF-KB-8Vx140-V 8 570 140 430

8 160 110 100 SDF-KB-8Vx160-V 8 570 160 430

8 180 130 100 SDF-KB-8Vx180-V 8 570 180 430

8 200 150 100 SDF-KB-8Vx200-V* 8 570 200 430

8 220 170 100 SDF-KB-8Vx220-V* 8 570 220 430

* Delivery time upon request

AF10

ApprovalETA-15/0387

Characteristic loads*

Tensile strength NRk,p in concrete < C16/20 4.50 kN

Tensile strength NRk,p in concrete ≥ C16/20 6.50 kN

Brick Mz 28-1.8, NF 2.50 kN

Solid lime sand brick KS, NF 20-2,0 2.00 kN

Transverse strength VRk,s

Anchor with steel screw 5.30 kN

Bending moment MRk,s

Anchor with steel screw 8.20 Nm

*applies to temperature range 30-50 °C / 50-80 °C

Page 35: EJOT fastening solutions for the building technology

Fasteners for the building technology

35

Application range l Installation of metal attachments

l For all non-load carrying redundant systems

according to ETAG 020

l Suitable for the structural fastening of wall

cupboards, cladding, metal angle pieces

Properties l Anchor with an embedment depth of 40 mm

in concrete

l Two installation depths (embedment in

masonry 50 mm)

l Very short expansion part for extremely fast

installation

l Optimal expanding part due to radial

expansion

l Very high bending moment

l Product identification through different

sleeve colours

l Double safety lock against torsion for secure

installation

NotePlease observe European Technical Approval

ETA-10/0305 in the planning and processing of

products. Further information about parameters

and loads can be found in the approval.

EJOT® facade anchor SDF-KB-10Vwith hexagon head

Characteristic values

Hole depth in concrete h1,1 ≥ 50 mm

Effective embedment depth in concrete hnom,1

≥ 40 mm

Hole depth in masonry h1,2 ≥ 60 mm

Effective Embedment depth in masonry hnom,2

≥ 50 mm

Drill hole diameter d0 10 mm

Hole diameter of component to be fixed df ≤ 10.5 mm

Drive AF13/T40

Characteristic loads

Tensile load NRk,p in concrete C12/15

Temperature range 30 °C / 50 °C 4.50 kN

Temperature range 50 °C / 80 °C 4.00 kN

FRk brick Mz 20-1.8, NF 2.50 kN

FRk solid lime sand brick KS 36, NF 4.00 kN

FRk solid lime sand brick KS 20, 8 DF 4.50 kN

Transverse load VRk,s in concrete C12/15 at hnom,1 = 40 mm

Anchor with steel screw 7.93 kN

Anchor with stainless steel screw A4 9.12 kN

Transverse load VRk,s at hnom,2 = 50 mm

Anchor with steel screw 11.09 kN

Anchor with stainless steel screw A4 12.94 kN

Bending moment MRk,s at hnom,1 =40 mm

Anchor with steel screw 13.80 kN

Anchor with stainless steel screw A4 16.09 kN

Side load MRk,s at hnom,2 = 50 mm

Anchor with steel screw 23.01 Nm

Anchor with stainless steel screw A4 26.62 Nm

ApprovalETA-10/0305

Ø[mm]

Anchorlength L

[mm]

Fasteningthickness t

fix

(concrete)≤ [mm]

Fasteningthickness t

fix (masonry)

≤ [mm]

PU Order description Article number

Anchors with steel screws with zinc-plated Cr(VI)-free coating (-V)

10 50 10 – 100 SDF-KB-10Vx50-V 8 581 050 450

10 60 20 10 100 SDF-KB-10Vx60-V 8 581 060 450

10 70 30 20 100 SDF-KB-10Vx70-V 8 581 070 450

10 80 40 30 100 SDF-KB-10Vx80-V 8 581 080 450

10 100 60 50 100 SDF-KB-10Vx100-V 8 581 100 450

10 120 80 70 100 SDF-KB-10Vx120-V 8 581 120 450

10 140 100 90 100 SDF-KB-10Vx140-V 8 581 140 450

10 160 120 110 100 SDF-KB-10Vx160-V 8 581 160 450

10 180 140 130 100 SDF-KB-10Vx180-V 8 581 180 450

10 200 160 150 100 SDF-KB-10Vx200-V 8 581 200 450

10 220 180 170 100 SDF-KB-10Vx220-V 8 581 220 450

Anchor with A4 stainless steel screw (-E)

10 50 10 – 100 SDF-KB-10Vx50-E 8 581 050 650

10 60 20 10 100 SDF-KB-10Vx60-E 8 581 060 650

10 70 30 20 100 SDF-KB-10Vx70-E 8 581 070 650

hh1nomh ttol

t fix

h

h1,1hnom,1

t fixtolt

h

h1,2hnom,2

t fixtolt

Concrete

hh1nomh ttol

t fix

h

h1,1hnom,1

t fixtolt

h

h1,2hnom,2

t fixtolt

Masonry

AF13/T40

Page 36: EJOT fastening solutions for the building technology

36

Fasteners for the building technology

Application range l Installation of metal attachments

l For all non-load carrying redundant systems

according to ETAG 020

l Suitable for the structural fastening of wall

cupboards, cladding, metal angle pieces

l For embedment in rain screens

Properties l Approved for all common building materials

l Reliable hold in problematic building material

thanks to optimised expansion part

l Radial expansion for reliable hold

l Product identification through different

sleeve colours

l Double safety lock against torsion for secure

installation

NotePlease observe European Technical Approval

ETA-10/0305 in the planning and processing of

products. Further information about parameters

and loads can be found in the approval.

EJOT® facade anchor SDF-KB-10Hwith hexagon head

Characteristic values

Hole depth in concrete h1,1 ≥ 80 mm

Effective Embedment depth hnom ≥ 70 mm

Drill hole diameter d0 10 mm

Hole diameter of component to be fixed df ≤ 10.5 mm

Drive AF13/T40

Characteristic loads

Tensile load NRk,p in concrete C12/15

Temperature range 30 °C / 50 °C 4.50 kN

Temperature range 50 °C / 80 °C 4.00 kN

Brick Mz 20-1.8, NF 4.00 kN

Solid lime sand brick KS 36, NF 4.50 kN

Solid lime sand brick KS 20, 8 DF 4.50 kN

Solid lightweight concrete brick V6, 2 DF 2.00 kN

Vertically perforated brick HLz 12-0.9, NF 2.00 kN

Perforated lime sand brick KSL 12, 4 DF 2.50 kN

Cavity block made of lightweight concrete Hbl 10, 12 DF

1.20 kN

Transverse load VRk,s

Anchor with steel screw 9.35 kN

Anchor with stainless steel screw A4 10.91 kN

Bending moment MRk,s

Anchor with steel screw 17.67 Nm

Anchor with stainless steel screw A4 20.62 Nm

ApprovalETA-10/0305

Ø [mm]

Anchor length L [mm]

Fasteningthickness tfix

≤ [mm]PU Order description Article number

Anchors with steel screws with zinc-plated Cr(VI)-free coating (-V)

10 80 10 100 SDF-KB-10Hx80-V 8 513 080 420

10 100 30 100 SDF-KB-10Hx100-V 8 513 100 420

10 120 50 100 SDF-KB-10Hx120-V 8 513 120 420

10 140 70 100 SDF-KB-10Hx140-V 8 513 140 420

10 160 90 100 SDF-KB-10Hx160-V 8 513 160 420

10 180 110 100 SDF-KB-10Hx180-V 8 513 180 420

10 200 130 100 SDF-KB-10Hx200-V 8 513 200 420

10 220 150 100 SDF-KB-10Hx220-V 8 513 220 420

Anchor with A4 stainless steel screw (-E)

10 80 10 100 SDF-KB-10Hx80-E 8 513 080 620

10 100 30 100 SDF-KB-10Hx100-E 8 513 100 620

10 120 50 100 SDF-KB-10Hx120-E 8 513 120 620

10 140 70 100 SDF-KB-10Hx140-E 8 513 140 620

10 160 90 100 SDF-KB-10Hx160-E 8 513 160 620

10 180 110 100 SDF-KB-10Hx180-E 8 513 180 620

10 200 130 100 SDF-KB-10Hx200-E 8 513 200 620

10 220 150 100 SDF-KB-10Hx220-E 8 513 220 620

hh1nomh ttol

t fix

h

h1,1hnom,1

t fixtolt

h

h1,2hnom,2

t fixtolt

Installationsubstrate

AF13/T40

Page 37: EJOT fastening solutions for the building technology

Fasteners for the building technology

37

Application range l Installation of metal attachments

l For all non-load carrying redundant systems

according to ETAG 020

l Suitable for the structural fastening of wall

cupboards, cladding, metal angle pieces

Properties l Approved for all common building materials

l Reliable hold in problematic building material

thanks to optimised expansion part

l Radial expansion for reliable hold

l Product identification through different

sleeve colours

l Double safety lock against torsion for secure

installation

NoteFor the planning please note approval ETA-

15/0027.

EJOT® facade anchor SDF-KB-14Awith hexagon head

Characteristic values

Drive Hexagon A/F17

Drill hole depth ≥ t 80 mm

Embedment depth ≥ hv 70 mm

AF17

Ø [mm]

Anchor length L [mm]

Fixingthickness B

≤ [mm]PU Order description Article number

Anchors with steel screws with zinc-plated Cr(VI)-free coating (-V)

14 80 10 50 SDF-KB-14Ax80-V 8 590 080 430

14 100 30 50 SDF-KB-14Ax100-V 8 590 100 430

Anchor with A4 stainless steel screw (-E)

14 80 10 50 SDF-KB-14Ax80-E* 8 590 080 630

14 100 30 50 SDF-KB-14Ax100-E* 8 590 100 630

* Delivery time upon request

Characteristic loads*

Tensile load NRk,p in concrete > C12/15 8.50 kN

Brick Mz 20-1.8, NF 5.50 kN

Solid lime sand brick KS 20-2.0 6.00 kN

Solid lime sand brick KS 20-1.8 7.00 kN

Solid brick V, 3 DF 3.00 kN

Vertically perforated brick HLz, 2 DF 28-1.2 2.00 kN

Perforated lime sand brick KSL, 8 DF 16-1.4

2.50 kN

Cavity block tile made of lightweight concrete Hbl, 12 DF

2.00 kN

Aerated concrete fb ≥ 2 N/mm2 1.20 kN

Aerated concrete fb ≥ 4 N/mm2 2.50 kN

Aerated concrete fb ≥ 6 N/mm2 3.50 kN

Transverse load VRk,s

Anchor with steel screw 21.7 kN

Anchor with stainless steel screw A4 25.3 kN

Bending moment MRk,s

Anchor with steel screw 62.5 Nm

Anchor with stainless steel screw A4 72.9 Nm

*applies to temperature range 30-50 °C / 50-80 °C

ApprovalETA-15/0027

ht fixh1

nomh tolt

ht fixh1

nomh tolt

Ø14A

SDF-KB

Ø14A

SDF-S

Accessories

Order description PU Article number

Socket A/F17-3/8“x25 1 9 250 522 000

Page 38: EJOT fastening solutions for the building technology

38

Fasteners for the building technology

Characteristic values

Drive AF13/T40

Drill hole depth ≥ t 80 mm

Embedment depth ≥ hv 70 mm

Characteristic values

Compressive strength aerated concrete [N/mm2]

Aerated concrete 2 0.75 kN

Aerated concrete 3 1.31 kN

Aerated concrete 4 1.87 kN

Aerated concrete 6 3.00 kN

Partial safety factor γMAAC 2.00

Characteristic bending moment

Steel screw 17.7 Nm / γMs 1.50

Stainless steel screw 20.6 Nm / γMs 1.87

ApprovalETA-12/0502

Application range l For embedment of metal components in

aerated concrete

Properties l Facade anchor with two-stage screw

l Reliable form-fit in the substrate thanks to

combined expansion zones

l High load capacity

l Available with steel screws or stainless steel

screws

NoteFor planning and processing, please observe

approval ETA-12/0502.

EJOT® facade anchor SDP-KB-10Gwith hexagon head

Ø [mm]

Anchor length L [mm]

Clamping thickness tfix

≤ [mm]PU Order description Article number

Anchors with steel screws with zinc-plated Cr(VI)-free coating (-V)

10 80 10 100 SDP-KB-10Gx80-V 8 532 080 420

10 100 30 100 SDP-KB-10Gx100-V 8 532 100 420

10 120 50 100 SDP-KB-10Gx120-V 8 532 120 420

10 140 70 100 SDP-KB-10Gx140-V 8 532 140 420

10 160 90 100 SDP-KB-10Gx160-V 8 532 160 420

10 180 110 100 SDP-KB-10Gx180-V 8 532 180 420

10 200 130 100 SDP-KB-10Gx200-V 8 532 200 420

10 220 150 100 SDP-KB-10Gx220-V 8 532 220 420

Anchor with A4 stainless steel screw (-E)

10 80 10 100 SDP-KB-10Gx80-E 8 532 080 620

10 100 30 100 SDP-KB-10Gx100-E 8 532 100 620

10 120 50 100 SDP-KB-10Gx120-E 8 532 120 620

10 140 70 100 SDP-KB-10Gx140-E 8 532 140 620

10 160 90 100 SDP-KB-10Gx160-E 8 532 160 620

10 180 110 100 SDP-KB-10Gx180-E 8 532 180 620

10 200 130 100 SDP-KB-10Gx200-E 8 532 200 620

10 220 150 100 SDP-KB-10Gx220-E 8 532 220 620

AF13/T40

Page 39: EJOT fastening solutions for the building technology

Fasteners for the building technology

39

Application range l Time saving anchor for light fastenings:

substructures, wardrobes, floorboards, bars,

cable racks, cable clamps, tube holders

l For dry indoor conditions

Eigenschaften l Polyamid countersunk anchor

l Nail screw with steel countersunk head,

galvanized zinc plated

d0

[mm]L

[mm]tfix

[mm]hnom

[mm]h1

[mm]PU Order description Article number

5 30 5 25 40 200 ND-K-5x30 9 650 075 658

5 50 20 30 60 200 ND-K-5x50 9 650 075 659

6 40 10 30 50 200 ND-K-6x40 9 650 075 660

6 60 30 30 70 200 ND-K-6x60 9 650 075 661

6 80 50 30 90 100 ND-K-6x80 9 650 075 662

8 60 20 40 70 100 ND-K-8x60 9 650 075 665

8 80 40 40 90 100 ND-K-8x80 9 650 075 663

8 100 60 40 110 100 ND-K-8x100 9 650 075 664

8 120 80 40 130 100 ND-K-8x120 9 650 075 610

Nail anchor ND-K

PZ

Page 40: EJOT fastening solutions for the building technology

40

Notes

Page 41: EJOT fastening solutions for the building technology

41

Notes

Page 42: EJOT fastening solutions for the building technology

4242

Imprint

ImprintPublisher:

EJOT Baubefestigungen GmbH

57334 Bad Laasphe, Germany

Layout and realisation:

EJOT Baubefestigungen GmbH

57334 Bad Laasphe, Germany

Legal Notes

EJOT products undergo continuous further development. We

reserve the right to make changes to ranges and prices. For

current product data please visit our online shop at www.

bau.ejot.de

During planning and use of our products, please comply with

the accepted rules of technology, construction legislation

and the relevant safety regulations. The national technical

approvals granted to our products can be downloaded on

the Internet at www.ejot.com.

General terms and conditions:

Our general terms and conditions can also be found at www.

ejot.com (footer: Terms & Conditions)

© 2017 by EJOT Baubefestigungen GmbH

EJOT®, ejotherm®, Delta PT® and PT® are registered trade-

marks of EJOT GmbH & Co. KG. CRONIMAKS®, Corremaks®,

EJOFAST®, Dabo®, ECOmate® FR-variotool® and Solar

Ready® are registered trademarks of EJOT Baubefestigun-

gen GmbH. SDS plus® is a registered trademark of Robert

Bosch GmbH. DEKTITE® is a registered trademark of Deks

Industries Pty. Ltd., Bayswater Victoria, AU. TORX®, TORX

PLUS® and AUTOSERT® are registered trademarks of Acu-

ment Intellectual Properties, LLC, Troy Mich., US.

Cover:

Katuaq Nuuk Godthab Modern Architecture, Greenland

Credit: Getty Images/iStockphoto © Mlenny

Your contact:

www.ejot.com

Page 43: EJOT fastening solutions for the building technology

43

ContactInternational

AustriAEJOT Austria GmbH & Co KGGrazer Vorstadt 146 A-8570 Voitsberg phone: +43 3142 2 76 00-0 fax: +43 3142 2 76 00-30 e-mail: [email protected] Internet: www.ejot.at

BAltic stAtesUAB EJOT BalticTitnago g. 19 LT-02300 Vilnius phone: +370 5 23 11-437 fax: +370 5 23 11-439 e-mail: [email protected]: www.ejot.lt

BeneluxEJOT Benelux bvba/sprlReedonk 19-1B-2880 Bornemphone: +32 3 740 79 70fax: +32 3 740 79 79e-mail: [email protected] Internet: www.ejot.be

BrAZilEJOT & Fey Ltda. Rod BR 470, 2451 - Rio MortoIndaial - SC, 89130-000, BrasilPhone: +55 47 3281-7000e-mail: [email protected]

BulgAriAEJOT Bulgaria EOOD & Co. KDLogistic center „Mimi DM“ No 31Miroviane 1289 phone: +359 2421 96 37fax: +359 2421 96 37e-mail: [email protected]

BOsniA AnD HerZegOVinAEJOT d.o.o. SarajevoRajlovacka b.b.BiH-71000 Sarajevophone: +387 33 782 760e-mail: [email protected]

cHinAEJOT Fastening System (Taicang) Co., LtdNo.165 Fada Road Loudong Street Taicang, Jiangsu ProvinceP.R. China 215413phone: +86 512 53 56 52 90-105fax: +86 512 53 56 62 92e-mail: [email protected]: www.ejot.cn

crOAtiAEJOT Spojna Tehnika d.o.o.Franje Lučića 23/3HR-10090 Zagrebphone: +385 1 349 86 12fax: +385 1 349 89 63e-mail: [email protected]

cZecH repuBlic EJOT CZ, s.r.o.Zdĕbradská 65CZ-25101 Řičany-Jažlovicephone: +420 323 62 78 11fax: +420 323 62 78 20e-mail: [email protected]: www.ejot.cz

DenmArkEJOT Danmark ApSIndustrisvinget 8 DK-4683 Rønnede phone: +45 56 39 08 42fax: +45 56 39 91 06e-mail: [email protected]: www.ejot.dk

FinnlAnDSormat OyHarjutie 5FI-21290 Ruskophone: +358 (0)207 94 0200fax: +358 (0)201 76 3888e-mail: [email protected] Internet www.sormat.com

FrAnceEJOT France S.à.r.l.Z.I. de Villé - 5 rue du Climont B.P. 40023 F-67220 Villé phone: +33 388 58 92 00fax: +33 388 58 92 01e-mail: [email protected]: www.ejot.fr

germAnyEJOT Baubefestigungen GmbHIn der Stockwiese 35D-57334 Bad Laasphephone: +49 2752 908-0fax: +49 2752 908-731e-mail: [email protected]: www.ejot.de

HungAryEJOT Hungaria Kft.Leshegy út 16.H-2310 Szigetszentmiklósphone: +36 30 546 6807e-mail: [email protected]: www.ejot.hu

inDiALPS-EJOT Fastening Systems Pvt. Ltd.A-501/502, Millennium Plaza, Sector-27, Gurgaon -1240022, Haryana, lndiaphone: +91 124 4200 492fax: +91 124 4200 493mobile: +91 98180 7 77 92e-mail: [email protected]

itAlyEJOT Tecnologie di fissaggio S.a.s.Via Marco Polo 16I-35011 Campodarsego (PD)phone: +39 049 98690 00e-mail: [email protected]: www.ejot.it

JApAn EJOT Japan L.L.C. 1742-1 Yamada, Kawagoe-Shi, Saitama-Ken, 350-0822 Japanphone: +81 49 227 9181fax: +81 49 227 9112

mexicOEJOT ATF Fasteners de México y Compañía, S. en C. División Fijaciones para la ConstrucciónAv. Del Siglo No. 180 Parque Industrial MillenniumSan Luis Potosí S.L.P.C.P. 78395 Méxicophone: +52  444 8 70 82 25e-mail: [email protected]: www.ejot-atf.com

nOrwAyEJOT Festesystem A/SAslakveien 20AN-0701 Oslophone: +47 23 25 30 40fax: +47 23 25 30 41e-mail: [email protected]: www.ejot.no

pOlAnDEJOT Polska Spółka z ograniczoną odpowiedzialnością Spółka komandytoUl. Jeżowska 9 PL-42-793 Ciasna phone: +48 34 351 06 60 fax: +47 23 353 54 10 e-mail: [email protected] Internet: www.ejot.pl

rOmAniAEJOT Romania SRLStr. Depozitelor 27RO-110078 Pitestiphone: +40 248 223 886fax: +40 248 223 887e-mail: [email protected]

russiAOOO EJOT WOSTOK105523 Moscow, RussiaSchelkovskoe highway, 100 bld. 1Office 5111phone: +7 495 259 09 09fax: +7 495 259 09 09e-mail: [email protected]: www.ejot.ru

serBiAEJOT Tehnika spajanja d.o.o. Autoput Beograd-Novi Sad 296X SCG-Serbia, 11080 Zemunphone: +381 11 748 60 82fax: +381 11 748 00 56e-mail: [email protected]

singApOreEJOT Asia Pacific Pte. Ltd.32 Old Toh Tuck Road#04-05 I.Biz CentreSingapore 597658phone: +65 65 62 8600fax: +65 65 62 8601email: [email protected]

slOVAkiAEJOT Slovakia, s.r.o.Juzná trieda 82 (Areál VSS)SK-04017 Košicephone: +421 55 622 17 60fax: +421 55 678 09 57e-mail: [email protected]: www.ejot.sk

spAinEJOT Ibérica, S.L.U.C/ Chile, 4 edificio II - oficina 30E-28290 Las Matas (Las Rozas) Madridphone: +34 916 300 822fax: +34 911 383 815e-mail: [email protected] Internet: www.ejot.es

sweDenEJOT Sverige ABSandtagsvägen 9S-70236 Örebrophone: +46 19 20 65 00fax: +46 19 20 65 28e-mail: [email protected]: www.ejot.se

switZerlAnDEJOT Schweiz AGUttwiler Strasse 3CH-8582 Dozwilphone: +41 71 414 52 22fax: +41 71 414 52 50 e-mail: [email protected]: www.ejot.ch

tAiwAnEJOT Taiwan Branch4No. 8, Aly. 81, Ln. 296, Xinya Rd., Qianzhen Dist. 80673 Kaohsiung, Taiwan, R.O.C.phone: +886 7 811 08 18e-mail: [email protected]

turkeyEJOT TezmakCebeci Cad. No. 84TR-34250 Küçükköy-Istanbulphone: +90 212 477 77 92-95fax: +90 212 538 00 93e-mail: [email protected]: www.ejot-tezmak.com

uniteD ArAB emirAtesEJOT Middle East FZESharjah Airport International Free ZoneP.O. Box 120588 SharjahUnited Arab Emirates phone: +971 6 557 97-70fax: +971 6 557 97-75 e-mail: [email protected] Internet: www.ejot.com

uniteD kingDOmEJOT U.K. Ltd.Hurricane CloseSherburn Enterprise ParkSherburn- in- ElmetGB- Leeds LS25 6PBphone: +44 1977 68 70 40fax: +44 1977 68 70 41e-mail: [email protected]: www.ejot.co.uk

usAEJOT Fastening Systems L.P.9900 58th Place, Suite 100Kenosha, Wisconsin 53144 USAphone: +1 262 612 35 50fax: +1 262 721 12 45e-mail: [email protected]: www.ejot-usa.com

www.globalfasteneralliance.com

Page 44: EJOT fastening solutions for the building technology

EJOT Baubefestigungen GmbHIn der Stockwiese 35

D-57334 Bad Laasphe, Germany

Phone: +49 2752 908-0

Fax: +49 2752 908-731

E-Mail: [email protected]

Website: www.ejot.com

595-

EN

/0.5

/03.

17 |

I00

00

005

33