ekta paraswani
TRANSCRIPT
Concept presentation by Ekta Paraswani
Client Tupperware 2012
In collaboration with S.labs Facilitator Girish Prabhu & Janak Mistry
Tupperware
ContentAreas of interest
concept
Intial ideation
Feedback
Mood board
Ideation
Form exploration
Validation
Use cases
Page 2 of 37
Areas of interest & User research
AREAS OF INTEREST | ALTERNATIVE USE | MISPLACEMENT | CLEANING | AESTHETICS & ERGONOMICS | GRADE & QUALITY | PLASTIC ALTERNATIVES | STORAGE | ON THE GO
USER RESEARCH | YOUNG ADULT | ACTIVE ADULT | EARLY CHILDHOOD | WORKING SEDENTARY
Page 3 of 37
Curvalicious“Dual hydration”
BLUE PRISM“Filling simultaneously”
Page 4 of 37
Curvalicious
CONCEPT
The curvalicious is a design for people who like a little variety in their beverage choices, curvalicious water bottle allows you to hold two different beverages in one bottle.
It is a water bottle with two chambers for dual hydration on the go. Apple juice and orange juice? Water and Gatorade? Lassi and Water? Carry one but two drinks.
Page 6 of 37
Scenario
GYM | TRAVELLING | ATHLETE | JOGGING | SCHOOL PLAYGROUND | OFFICE
Page 12 of 37
A canteen is a drinking water bottle designed to be used by hikers, campers, soldiers and workers in the field.
Many canteens also include a nested canteen cup.
Primitive canteens were sometimes made of hollowed-out gourds, such as a calabash, or were bags made of leather.
Designs of the mid-1900s were made of metal tin-plated steel, stainless steel or aluminium with a screw cap, the cap frequently being secured to the bottle neck with a short chain or strap to prevent loss.
Inspiration
Page 11 of 37
Ideation
Page 7 of 37
Ideation
Page 8 of 37
Ideation
Page 9 of 37
Ideation
Page 10 of 37
Page 13 of 37
Working
1. This is the way it looks when not in use.
2. Unscrew the cap. This cap can be used as a glass.
3. Now you have an option of using the bottle without the glass.
4. Now there’s a choice. Lemonade and water? Apple juice and orange juice?
5. To clean you need to unscrew the base cap.
CAP as a GLASSThere’s a common glass for two different liquids which is not preferred.
FLIP CAPIts inconvenient and comes in the way of your nose.
TUMBLERWorks without the outer chamber
BASE CAPToo many components
CHAMBERSCannot be used for bevenrages of varying temperatures.
RUBBER STOPPERToo many components
Feedback
Ideation
Ideation
CurvaliciousNew & Improved
Page 17 of 37
Inspiration board
ORGANIC | CURVY | MINIMALISTIC | FUNCTIONAL | FRESH
Page 18 of 37
1. These two containers snap fit together .
2. Screw on the inner cap, has an attached rubber stopper.
3. You can rotate the cap on any one of the containers.
4. Screw on the outer cap once it is used.
5. This is the way it looks when not in use.
Working
Page 19 of 37
1. Ergonomically shaped. Easy to grip.
2. Easy to fix due to snap fit.
3. Rotating cap with two different holes. Avoids overlapping of tastes.
4. Screw on cap. Easy to clean
5. Loop for strap.
Ergonomic considerations
Page 20 of 37
Material Study TECHNOLOGY Extrusion Blow Molding (EBM), plastic is melted and extruded into a hollow tube (a parison). This parison is then captured by closing it into a cooled metal mold. Air is then blown into the parison, inflating it into the shape of the hollow bottle, container, or part.
MATERIAL This product is made out of polyethylene (PE). PE is one of the widely used polymers in the industry. The long hydrocarbon chain structure makes it suitable for various industrial uses.In case of this product it provides a reasonable amount toughness and execellent chemical resistance.
Primary objective Light, Strong, Naturally translucent and Flexible, Economical
Secondary objective Imapct resistant, Good mositure barrier, Approved food grade, Good protection at below freezing temperature
Page 21 of 37
Renderings
Renderings
Page 22 of 37
BLUE PRISM“Filling simultaneously”
Blue prism
CONCEPT
The blue prism is a design for people in need for a universal bottle. This bottle serves both on the go bottle and storage bottle. This bottle has an unique feature that lets fill three bottles simultaneously.
Page 23 of 37
Intial Ideation
Page 24 of 37
Intial Ideation
Page 25 of 37
Intial Ideation
Page 26 of 37
Scenario
OUTDOOR ACTIVITIES | CAMPING | TREKKING | HOME STORAGE
Page 27 of 37
Page 28 of 37
Working
1. Bottle when not in use 2. After you open the cap. The mouth is designed in a way where, that directs the flow of liquid.
3. At this stage you can fill all the three bottles simultaneously.
4. The hexagon shape of the bottle helps in the storage.
Page 30 of 37
Feedback
MOUTHFilling will be difficult as tip will splash the water outside.
GRIP Doesn’t have a guided grip.
MOUTHWater will get stuck in the mouth piece.
New & Improved
BLUE PRISM
Page 31 of 37
1. ThIis is the whole bottle when not in use.
2. When outer cap is removed.
3. Now, you can snap fit the three bottles which creates a hexagon shape.
4. Turn the tap on and you can fill three bottles together.
Working
Page 32 of 37
Exploded viewCAP
INNER CAP
STRAP
BOTTLES
1. Snap fit. Easy to open. 2. Mouth acts as a spout, Easy to drink.
3. Strap, easy to carry. 4. Easy to store
Ergonomic considerations
Page 33 of 37
5. Angle helps the water to flow back.
5
28
Technical drawing
SIDE VIEW FRONT VIEW TOP VIEW
Material Study TECHNOLOGY Extrusion Blow Molding (EBM), plastic is melted and extruded into a hollow tube (a parison). This parison is then captured by closing it into a cooled metal mold. Air is then blown into the parison, inflating it into the shape of the hollow bottle, container, or part.
MATERIAL This product is made out of polyethylene (PE). PE is one of the widely used polymers in the industry. The long hydrocarbon chain structure makes it suitable for various industrial uses.In case of this product it provides a reasonable amount toughness and execellent chemical resistance.
Primary objective Light, Strong, Naturally translucent and Flexible, Economical
Secondary objective Imapct resistant, Good mositure barrier, Approved food grade, Good protection at below freezing temperature
Page 34 of 37
Page 35 of 37
Page 36 of 37
Page 37 of 37
Thank you