electric tools woodworking garden equipment - · pdf filedrills & hammer drills 4-6...

Electric tools

Woodworking

Garden equipment

SWISSM [email protected], w w w.swissm.ch

2008

plu

g a

nd

wo

rk

Drills & hammer drills 4-6

Cordless screwdrivers 6-11 Angle grinders & grinders 12-16 Hand-held circular saws & jigsaws 18-20

Electric planes & cutters 21-22

Solder guns & hot glue guns 23

Machine sets 24-25

Double grinders 26

Tile and stone cutting machines 28-29

Drag crosscut and mitre saws 30-31

Bench circular saws 32-34

Band saws & metal crosscut saws 35-36

Column drills 37

Compressors 38-41

Electric shielding gas welding sets 42-43

Generators 45-47

Cable hoists 48

Pressure washers 49-50

Wet & dry vacuum cleaners 51-52

Lawn trimmers 54

Motor scythes & motor trimmers 55

Lawnmowers & cultivators 56

Cordless lawn care tools 57

Hedge cutters 58

Chainsaws 59-60 Domestic waterworks 61

Garden pumps 62

Dirty water pumps 63

Leaf blowers 64

Petrol hoes 65

Garden shredders & garden sprayers 66

Table of contents - Tools and Garden Equipment

Drilling, hammer drilling

Hammer drillsPowerful, ergonomically balanced hammer drills with keyless chucks. Can be switched from drilling to hammer drilling and vice versa. Impact-resistant plastic casing, electronic drilling speed control. Additional power handle with integral depth stop for easy, effective working.

ED-E 850Impact drill

Article number: 120.100.094

Mains: 230 V~50 HzRating: 850 WDrilling capacity: Steel 13 mmSpeed: 0-2,900 rpm

Features:Keyless chuck 0-13 mmAuxiliary handleDeep ruler

ED-E 500-13Hammer drill

Mains: 230 V~50 HzRating: 500 WDrilling capacity: Wood 20 mm Concrete 13 mm Steel 10 mmSpeed: 0-2,600 rpm

Article number: 120.100.054 EAN-Code: 4250116801954

Features:Infinite electronic speed controlDrilling and hammer drillingKeyless chuck: 2-13 mmAdditional handle with depth stop

ED-E 1050-16Professional hammer drill


Mains: 230 V~50 Hz Electronic 2-speedRating: 1050 WDrilling capacity: 1.5-13 mmSpeed: 1st speed: 0-1,000 rpm 2nd speed: 0-3,000 rpm

Features:Electronic reversing facility2-speedHammer drillingSecond handle with depth stopKeyless chuck

4

EHD 1400-28Hammer drill in case

Optional accessories: SDS-Plus drill bit set (diameter 5/6 x 100; 8,10,12 x 150; 14,16 x 200; 18,22 x 350), Article number: 120.210.010SDS-Plus chisel set (2x pointed chisels, 1x flat chisel), Article number: 120.210.020

Mains: 230 V ~ 50Rating: 1,400 WSpeed: 680 rpmStroke speed: 3,600 rpmDrilling capacity: 260 mm concrete/steelHammer force: 4.2 J


Features:SDS-Plus mountingAdditional handle with depth stopHammer stop for starting holesRotation stop for chisellingDrill bit diameters 8/10/12 – 150 mm1x pointed chisel1x flat chiselDust capin PVC case

Drilling, hammer drilling Drilling, hammer drilling, chiselling

Hammer drillsPowerful, comfortable hammer drill with SDS-Plus mounting for drilling, hammer drilling and chiselling.Can be switched over: Hammer stop for starting holes, rotation stop for chiselling.Ideal for renovation and demolition work.

5

EHD 1000-26Hammer drill in case

Optional accessories: SDS-Plus drill bit set (diameter 5/6 x 100; 8, 10, 12 x 150; 14,16 x 200; 18,22 x 350), Article number: 120.210.010SDS-Plus Chisel set (2x pointed chisels, 1x flat chisel), Article number: 120.210.020

Mains: 230 V ~ 50Rating: 950 WSpeed: 900 rpmStroke speed: 4,500 rpmDrilling capacity: 260 mm concrete /steelHammer force: 4.0 J


Features:SDS-Plus mountingAdditional handle with depth stopHammer stop for starting holesRotation stop for chisellingDust capin PVC case

Optional accessories: SDS -Plus-Hammer drill set, (Ø 5, 6 x 100; Ø 8, 10, 12 x 150; Ø 14, 16 x 200; Ø 18, 22 x 350), Article number: 120.210.010SDS-Plus-Chisel set (2 x pointed chisel, 1 x flat chisel), Article number: 120.210.020

EHD 851-28-SetHammer drill

Article number: 120.200.0204EAN-Code: 4250116800117

Mains: 230 V~50 HzRating: 850 WSpeed: 750 rpmStroke speed: 2,920 rpmDrilling capacity: 28 mm concrete/SteelHammer force: 3.5 J

Features:Sturdy metal hammer unitSDS-Plus mountingAdditional handle with depth stopHammer stop for starting holesRotation stop for chiselling workDrill bits: 8, 10 and 12 mm1x pointed chisel1x flat chiselDust capCase

EHD 1010Hammer Drill

Article number: EAN-Code:

Product Description 900w Hammer DrillSpecificationRated Voltage 230VRated Frequency 50HZ Rated Power 900WRated Speed 850r/minMax Drilling Diame 26mm

EHD 800Hammer drill


Mains: 230 V~50 HzRating: 800 WIdling speed: 0-780 rpmStroke speed: 0-3,900 rpmDrilling capacity in concrete: 26 mm diameterHammer force: 3 J

Features:3 functions: Drilling, hammer drilling, chisellingSDS-Plus mountingAdditional handleDepth stopElectronic controlPlastic caseDrill bits: 8/10/12 mmPointed and flat chisels

Drilling, hammer drilling, screwing

Hammer drill and cordless screwdrivers

Powerful and ergonomically balanced hammer drill with SDS-Plus mounting for drilling, hammer drilling and demolition work. Can be switched over: Hammer stop for starting holes, rotation stop for chiselling.

Powerful and ergonomically balanced cordless screwdriver for working at home, on a site or in the garden. For fast screwing and drilling without requiring a mains socket. With electronic speed control, battery charger and lots of accessories.

6

EHD 1210Hammer Drill

Article number: EAN-Code:

Product Description 1200w Hammer DrillSpecificationRated Voltage 230VRated Frequency 50HZ Rated Power 1200WRated Speed 900r/minMax Drilling Diame 30mm

CD 24-2 SI Set2-speed cordless drill/hammer drill/screwdriver


Features:2-speed hammer drillD-handle cordless screwdriver with electronic speed controlMetal gearboxHammer drill functionincluding two 24 V, 1.2 Ah batteries17 torque settingsincluding 16-piece set in plastic caseBatter charger: 1 hour charger

Rating: 24 V – 1.2 Ah Ni-Cd batterySpeed: 0-500 rpm 1st gear 0-1,400 rpm 2nd gear Reversing facilityKeyless chuck: 13 mmDrilling capacity: Wood 15 mm Metal 10 mmCharging time: 1 hourGearbox: 2-speed gearbox

CD 18-PROMO2-speed cordless screwdriver


Features:T-handle cordless screwdriver with electronic speed control2 NC battery, 18 V16 torque settingsKeyless chuck 10 mmHigh speed charger 1 hourincluding 16-piece set in plastic case

Rating: 18 V – 1.3 Ah Ni-Cd batterySpeed: 0-550 rpm 0-1,050 rpmKeyless chuck: 1-10 mmDrilling capacity: Wood 10 mm Metal 8 mmCharging time: 1 hour

Cordless screwdrivers and drills Powerful and ergonomically balanced cordless screwdriver with double power for work at home, on site or in a workshop. For fast screwing and drilling without requiring a mains socket. PIC charge control in the charging station.With electronic speed control, battery charger and lots of accessories.

7

Drilling, screwing

CD 18-2 SI Set2-speed cordless screwdriver


Features:2-speed cordless drill and screwdriverT-handle cordless screwdriver with electronic speed control2 NC battery, 18V16 torque settingsKeyless chuck 10 mmincluding 16-piece set in plastic caseBattery charger: 1 hour

Rating: 18 V – 1.2 Ah Ni-Cd batterySpeed: 0-550 rpmKeyless chuck: 1-10 mmDrilling capacity: Wood 10 mm Metal 8 mmCharging time: 1 hourGearbox: 2-speed gearbox

Drilling, screwing

Cordless screwdrivers and drills Powerful and ergonomically balanced cordless screwdriver for work at home, on site or in a workshop. For fast screwing and drilling without requiring a mains socket. Charge control in the charging stationWith electronic speed control, battery charger and lots of accessories.

8

AK 14.4Cordless screwdriver


Features:T-handle cordless screwdriver with electronic speed control16 torque settingsBattery charger: 3-5 hours

Rating: 14.4 V – 1.2 Ah Ni-Cd batterySpeed: 0-550 rpmKeyless chuck: 1-10 mmDrilling capacity: Wood 10 mm Metal 8 mmCharging time: 3-5 hours

AK 18-2 SetCordless screwdriver


Features:T-handle cordless screwdriver with electronic speed controlIncluding two 18 V batteries 16 torque settingsBattery charger: 3-5 hoursincluding 16-piece set in plastic caseKeyless chuck 10 mm

Rating: 18 V – 1.2A h Ni-Cd batterySpeed: 0-550 rpmKeyless chuck: 1-10 mmDrilling capacity: Wood 10 mm Metal 8 mmCharging time: 3-5 hours

AK 18 SetCordless screwdriver


Features: T-handle cordless screwdriver with electronic speed control1 NC battery, 18V16 torque settingsKeyless chuck 10 mmPresentation boxBattery charger: 3-5 hoursincluding 16-piece set in plastic case

Rating: 18 V – 1.2 Ah Ni-Cd batterySpeed: 0-550 rpmKeyless chuck: 1-10 mmDrilling capacity: Wood 10 mm Metal 8 mmCharging time: 3-5 h

AK 14.4 LiCordless screwdriver


Features:T-handle cordless screwdriver with electronic speed control16 torque settingsBattery charger: 5-6 hoursincluding 16-piece set in plastic caseLithium-ion batteryNo memory effect

Rating: 14.4 V – 1.3 Ah Lithium batterySpeed: 0-550 rpmKeyless chuck: 1-10 mmDrilling capacity: Wood 10 mm Metal 8 mmCharging time: 5-6 hours

AK 18 Li Set Cordless screwdriver


Features:T-handle cordless screwdriver with electronic speed control16 torque settingsBattery charger: 5-6 hoursincluding 16-piece set in plastic caseLithium-ion batteryNo memory effect

Rating: 18 V – 1.3 Ah Lithium batterySpeed: 0-550 rpmKeyless chuck: 1-10 mmDrilling capacity: Wood 10 mm Metal 8 mmCharging time: 3-5 h

Cordless screwdrivers and drills with lithium-ion battery

Powerful and ergonomically balanced cordless screwdriver for work at home, on site or in a workshop. For fast screwing and drilling without requiring a mains socket. Durable lithium-ion battery with no memory effect. Charge control in the charging station.With electronic speed control, battery charger and lots of accessories.

9

Drilling, screwing

AK 18-2 SetCordless screwdriver


Features:T-handle cordless screwdriver with electronic speed controlIncluding two 18 V batteries 16 torque settingsBattery charger: 3-5 hoursincluding 16-piece set in plastic caseKeyless chuck 10 mm

Rating: 18 V – 1.2A h Ni-Cd batterySpeed: 0-550 rpmKeyless chuck: 1-10 mmDrilling capacity: Wood 10 mm Metal 8 mmCharging time: 3-5 hours

CD 3.6-46 Li Set Quick DrillCordless screwdriver with toolbox charging station


Rating: 3.6 V-1.4 AhCharger: 3-5 hour chargerBattery: Lithium-Battery-300mASpeed: 0-150 rpmMounting: 6.35 mm diameterCharging time: 3-5 hours

Features:Charge status indicatorDocking station including wall mountingMagnetic holdersIncluding 45 different bits

Drilling, screwing

Cordless screwdriver with toolbox charging station

Small, handy cordless screwdriver for quick jobs at home. For fast screwing and drilling without requiring a mains socket. Combined battery charging station with bits, magnetic holder and drill bits.

CD 4.8 Set Quick Drill CD 3.6-24 LiGun cordless screwdriver / drill

Article number: CD 4.8 Set 120.300.150 EAN-Code: 4250116891108 Article number: CD 3.6-24 Set 120.300.115 EAN-Code: 4250116890811

CD 4.8 Set Quick Drill CD 3.6-24 LiRating: 4.8 V-1.2 Ah 4.8 V-1.4 AhCharger: 3-5 hour charger 3-5 h hour chargerIdling speed: 150 rpm 150 rpmBattery Spannung: 6 V battery 6 V battery Charge current: 300 mAh 300 mAhCharger: 230 V~50 Hz 230 V~50 HzMounting: Ø 6.35 mm Ø 6.35 mm

Features:3 drill bits1 bit holder2 long bits18 bitsLED charge status indicatorMagnetic holders230 V charger

10

short long

short

short

short

short

long

long

long

long

short

short long

short

short

short

short

long

long

long

long

short

Drilling, screwing

Cordless screwdriver with 120-piece tool set

Powerful and ergonomically balanced cordless screwdriver for working at home, on a site or in the garden. Angled handle makes it particularly practical.For fast screwing and drilling without requiring a mains socket. Battery charger and lots of accessories.

11

CD 4.8-120 SetCordless screwdriver


Rating: 4.8 V – 1.2 AhCharger: 3-5 h chargerTorque: 23 settings

Features:120-piece accessory set Titanium-coated bitsIn a portable folding plastic case

Grinding, cutting

One-handed angle grinder

AG 900-125Angle grinder

Practical, powerful angle grinder for grinding, cutting, separating and polishing. A comfor-table position can be found for all types of work thanks to the fact that the handle can be fitted on both sides. A flat head makes work in places with difficult access easier. The spindle lock allows the grinding discs to be changed quickly.


Mains: 230 V~50 HzRating: 900 WSpeed: 11,000 rpmDisque diameter: ø 125 mm

Features:Spindle lockGuide handle can be fitted on the right or leftSafety hoodSpindle thread M14

AG 800-125 Evolution Angle grinder



Features:Aluminum headingMetal transmission headingSpindle lockAddition handle on the right left screwable

AG 500-115Angle grinder



Features:Spindle lockGuide handle can be fitted on the right or leftSafety hoodSpindle thread M14

12

All models without discs

AG 2200-230 EvolutionAngle grinder

AG 2000 EcoAngle grinder


Mains: 230 V~50 HzRating: 2,000 WIdling speed: 6,400 rpmDisque diameter: ø 230 mmSoft Start

Features:Metal gearbox headSpindle lockGuide handle can be mounted in 3 positions – right, left or topAdditional handle can be turned through 90° to the right and leftFlange wrench


Mains: 230 V~50 HzRating: 2200 WSpeed: 6000 rpmDisque diameter: ø 230 mm

Features:Soft start power limiterMetal gearbox headSpindle lockSwivelling handle (90°-rechts-links)addition handle (on the right-left above)Safety hoodSpindle thread M14

AG 1100 EvolutionAngle grinder



Features:Metal gearbox headSpindle lock2-hand handleGuide handle can be mounted in 2 positions – right, left Safety hoodSpindle thread M14Aluminium head

Two-handed angle grinders Powerful angle grinder for grinding, cutting, separating and polishing. A comfortable position can be found for all types of work thanks to the fact that the handle can be fitted on three sides. A flat head makes work in places with difficult access easier. The spindle lock allows the grinding discs to be changed quickly.

13

Grinding, cutting

All models without discs

ADS 7.2 Volt- LiLithium-ion battery delta sander


Battery: Lithium batteries 7.2 Volt – 1,000 mAhIdling speed: 10,000 rpmCharging time: 3-5 hoursCharger: 400 mA, 9 VAbrasive paper: 95 x 135 mm

Features:Including charging stationWall mounting for charging stationLED charge status indicator3 sheets of abrasive paper1 x 120 grit2 x 80 grit

Grinding, smoothing

Delta grinder for fine and coarse grinding work

Battery and 220 V delta grinder for specialist work. For smoothing and grinding wooden surfaces, plastic or metal. An ergonomic handle position and vibration-free operation of the machines mean they do not cause fatigue.

OS 105 DMulti-grinder

Mains: 230 V~50 Hz Rating: 105 WOscillations: 12,000 rpmAbrading area: 140 x 140 x 80 mmAbrasive paper size: 140 x 140 x 80 mm


Features:Adapter for dust extractionIncluding 1 sheet of abrasive paper

14

OS 300-115Orbital sander


Mains: 230 V~50 HzRating: 300 WOscillations: 12,000 rpmAbrading area: 225 x 115 mmAbrasive paper size: 280 x 115 mm

Features:Aluminium sanding plateSoft handleAdapter for dust extractionDust bagIncluding 1 sheet of abrasive paper


Grinding, smoothing

Belt and orbital sanders For smoothing and grinding wood, plastic, metal or painted finishes. Ergonomic handles and vibration-free operation of the machines mean they do not cause fatigue and produce a clean result.

15

BS 800-75/1Belt grinder

Optional accessories:Accessory set2 x grinding belt k40 2 x grinding belt k802 x grinding belt k60 2 x grinding belt k100Article number: 130.410.010

Mains: 230 V~50 HzRating: 730 WIdling speed: 360 rpmGrinding belt size: 760 x 460 mm


Features:Second handle for working without fatigue Precise belt guideIntegral dust extractionDust bag1 grinding beltBelt tensioning device

OS 135Orbital sander


Mains: 230 V~50 HzRating: 135 WOscillations: 10,000 rpmAbrading area: 185 x 90 mm

Features:Adapter for dust extractionIncluding 1 sheet of abrasive paper

GES 135Drill/Grinder Set


Mains: 230 V~50 HzRating: 135 WSpeed: 10,000-35,000 rpmFlexible shaft

Features:40-piece accessory set for cutting, drilling, grinding, engraving, milling, polishing and cleaningFlexible shaftTelescoping standBMC case

Grinding, polishing and engraving

Grinding and engraving set with flexible shaft

The multiple grinder with lots of accessories for grinding, drilling, cutting, polishing and engraving. The precise spindle guide and hardened collect chuck are ideal for producing clean work on wood, stone, glass and metal.The flexible shaft also allows very fine engraving and polishing work to be carried out.

16

Hand-held circular saw and jigsaw

Electric plane and surfacing/thicknessing plane

Moulding machines and masonry channel cutter

Hot air guns and solder guns

Tool sets

Woo

dwor

king


2008

CS 1200-190L CS 1400-190LProfessional hand-held circular saw with laser

Article number: CS 1200-190L 130.600.030 EAN-Code: 4250116800254

Article number: CS 1400-190L 130.600.060 EAN-Code: 4250116893881

Mains: 230 V~50 HzRating: 1,200 W / 1,400 WSpeed: 4,500 rpmCutting depth at 90°: max. 66 mmCutting depth at 45°: 56-58 mmCarbide metal saw blade: ø 190 mmBench: Can be adjusted to an angle of 45°

Features:Laser guideCarbide metal saw blade 190 mm / 24 TParallel stopSocket wrenchDust extractionPivot-mounted bench: 45°

CS 1200-180 PromoHand-held circular saw

Mains: 230 V~50 HzRating: 1,200 WSpeed: 4,500 rpmCutting depth at 90°: 65 mmCutting depth at 45°: 56-58 mmSaw blade: ø 185 mm x 20 x 24 T


Features:Carbide metal saw blade, 185 mmParallel stopDust extractionPivot-mounted bench: 45°

Figure: CS 1200-190 with laser

Sawing, cutting

Hand-held circular saws with and without laser guide

Lightweight, powerful and ergonomic circular saws with parallel stop, dust extraction and a base plate that can be adjusted to an angle of 45°. The laser display on the CS 1200-190L allows precise free-hand cutting.

18

MRS 850-150Universal saw

Mains: 230 V~50 HzRating: 850 WIdling speed: 500-2,600 rpmCutting heigh: Wood – max. 150 mmStroke height: 30 mm

Features:Electronic controlSoft handleSDS blade mountingMetal gearbox head+ 1,150 mm saw blade for wood+ 1,100 mm saw blade for metal

Article number: 130.700.020 EAN-Code: 4250116800278 Optional accessories:Saw blade set 3 x wood, 2x metalArticle number: 130.710.020

EJS 450-55 Set – jigsaw in case setEJS 450-55 jigsaw

Article number: EJS 450-55-Set 130.100.020 EAN-Code: 4250116800162 Article number: EJS 450-55 130.100.050 EAN-Code: 4250116890910

Mains: 230 V~50 HzRating: 450 WNo. of strokes: 500-3,000 rpmMax. cutting depth: 55 mmAngled cuts: max. 45°

Features:Adjustable bench can be pivoted up to 45° to the left and rightSaw blade roller guideFinger guardIntegral adapter for dust extraction

Case with accessories (EJS 450-55 Set only)

Accessories:Stop angle

Combination pliers

6 mm round file

7 mm firmer chisel

10 mm firmer chisel

Straight slot screwdriver

Philips screwdriver

3 m tape measure

3 joiner’s pencils

70 Spax 3.0x30 mm

60 Spax 3.5x30 mm

40 Spax 4.0x30 mm

3 jigsaw blades for iron

7 jigsaw blade for wood

5 sheets of abrasive paper 2x60, 1x150, 2x320

Sawing, cutting

Commercial jigsaw setUniversal saw

Extensive commercial set with powerful, ergonomic jigsaw for universal use in the home and workshop.

Universal saw, suitable for various materials such as wood, plastic or metal. For cutting wooden beams, boards and branches as well as copper pipes, etc.Ergonomic, simple electrical adjustment.

19

Mains: 230 V~50 HzRating: 610 WStroke rate 0-3000 minCutting depth: Wood max.60 mm Metal max.8 mmAngled cuts: Max 45°Weight: 2,3kg packing


Features:Stroke rate electronic control With electronics and pendulum strokeAdjustable desk to 45°, on the left and on the right Saw blade - roller apronFinger protectionIntegrated adapter for dust extraction1 saw blade

EJS 750 EvolutionJigsaw

Features:Electronic regulationSDS page accommodationAluminum desk with parallel guide stopPendulum stroke control quadrupleSoft grasp2 saw blades for wood1 universal saw blade1 Allen key

Mains: 230 V~50 HzRating: 750 W No. of strokes: 0-3,000 rpmCutting depth: Wood/iron: 80/8mm Plastic – max. 60 mm Metal – max. 8 mmAngled cuts: Max 45°pendulum stroke: 0, 1, 2, 3

EJS 610-60 EvolutionProfessional pendulum-action jigsaw

Jigsaws with and without laser guide

Powerful, ergonomic electronic jigsaw with a pendulum action and adjustable angle base for universal use.

The EJS 600-80L Set includes a precise laser cutting indicator that allows precise free-hand cutting.

20

Sawing, cutting


EP 1500-204-2 Surfacing/Thicknessing plane


Features:Surfacing plate bench size: 737 x 210 mmThicknessing plane bench size: 255 x 204 mmNumber of blades: 2Blade shaft diameter: 50 mmHSS planing knivesSurfacing stopAutomatic, uniform workpiece feedThicknessing bench with multiple mountingsThe thicknessing and surfacing benches are made of solid die-cast aluminium, chip discharge hoodIncluding 1 pair of spare bladesIntegral dust extraction with dust bag

Mains: 230 VoltRating: 1,500 WIdling speed-Rating: 8,000 rpmMax. planing width: 204 mmMax. surfacing height: 2 mmMax. clearance heigh: 12 cm

EP 710-82Electric plane

Mains: 230 V~50 HzRating: 710 WSpeed: 16,400 rpmChip depths: 0-3 mmPlaning width: 82 mm


Features:Carbide metal bladeInfinitely adjustable chip thickness 0-3 mmParallel stopSocket wrenchDrive belt

EP 650-82Electric plane


Mains: 230 V~50 HzRating: 650 WSpeed: 16,000 rpmChip depths: 0-2 mmPlaning width: 82 mm

Features:Carbide metal bladeInfinitely adjustable chip thickness 0-2 mmSocket wrenchParallel stopSpare drive belt

Electric planeSurfacing/Thicknessing plane

The ergonomic and lightweight electric planes are notable for their smooth operation. The adjustable chip thickness and interchangeable carbide metal blades make for professio-nal joinery results.

Compact, universal surfacing and thicknessing plane for hobby and workshop. The stable, torsion-free metal machine casing provides great strength and almost zero vibration operations. The machine can be converted from a surfacing to a thicknessing plane without needing any tools. Durable universal motor with sturdy belt drive.

21

Surfacing planes, thicknessing planes

R 1050-12-SET/1Router


Features:Plastic caseSpindle lock for easy changing of the router tools Parallel stopCutting depth adjustmentClamping tool mounting, 8 mmAdapter for dust extractionIncludes 12-piece routing set made of carbide metal

Mains: 230 V~50 HzRating: 1,050 WSpeed: 11,500-28,000 rpmStroke height: 44 mmChip size: ø 8 mmMoulder: ø 45 mm

WLC 1500-150Masonry channel cutter


Features:Plastic caseAdditional handleSoft start and constant motor powerDepth stop indicatorFast sheet changing systemCutting width presetting with flangesCutting depth adjustmentSafety switchExternal brushesAdapter for dust bag

Mains: 230 V~50 HzRating: 1,500 WSpeed: 8,500 rpmBlade: ø 150 mm / 125 mmCutting depth: 10 – 40 mmCutting width: 8 - 30.5 mm

BJ 850-100Biscuit jointer


Mains: 230 V~50 HzRating: 850 WSpeed: 11,000 rpmBlade: ø 100 mmCutting depth: 19 mm

Features:Plastic caseAngle adjustmentDepth adjustmentSpacing adjustment

Router, biscuit jointer and masonry channel cutter

This range contains powerful, precise machines for hobby and commercial use for all cutting work in wood, such as cutting oval holes and channels, moulding and making wood joints as well as for cutting slots in masonry.

22

Cutting, slotting

SG 100Soldering gun


Mains: 230 V~50 HzRating: 100 WTemperature: 500°CHeating time: 12 seconds

Features:2 soldering tips10 g soldering wire10 g soldering greasePlastic case

HG 2000/2 EHot air gun


Features:Ergonomic handlingPlastic transport case- Including 22 mm reducer nozzle- Paint scraper- Wide jet nozzle- Jetting nozzle

Mains: 230 V~50 HzRating: 2,000 WTemperaturee: Setting 1 - 300° Setting 2 - 600°Air volume: Setting 1 - 300 l/min Setting 2 - 500 l/min

23

Coating removal, deforming, soldering

Hot air gunSoldering gun

This powerful hot air gun with all the necessary accessories is essential for removing paint and coatings and for deforming and welding plastics.

High quality soldering gun with interchangeable tips and integral light for soldering wires and cables, and tin-plating.

3-piece machine set including bits and jigsaw blades


Consisting of:Cordless screwdriver CD 1818 V - 1.2 Ah 120.300.010Router R 10501,050 W 130.500.022Jigsaw EJS 610-60610 W 130.100.010

Features:Including 10 cuttersIncluding 10 jigsaw blades and 7-piece bit boxPacked in a carton

3-piece machine setin a case


Consisting of:Hammer drill ED E 800-13800 W 120.100.070Angle grinder AG 900-125 900 W 120.400.080Jig saw EJS 610-60 610 W 130.100.060

Features:Including 10 jigsaw bladesSDS drill bit set and 6 grinding discs

Drilling, screwing, sawing, cutting and grinding

3-piece tool setswith powerful professional machines

This practical tool set makes renovation work at home or in the workshop child’s play.

24

5-piece machine setin a case

3-Part Maschine setHome bau Starter Set


Article number: 511.010.110 EAN-Code:

Cosisting of:Drill 500 W 120.100.050Jigsaw 350 W 130.100.040Cordless screwdriver 14.4 Volt 120.300.080Orbital sander 135 W 130.200.020Angle grinder 115 500 W 120.400.040including mobile case

Art. Nr: 511-010-110.1 511-010-110Consisting of 120-200-020EHD of 850 electrical drilling hammers, 850 Wattswith 4 drills and 2 chiseis 130-600-050CS 1200-160 portable circular saw 1200 Watts120-400-030 AG 2000-230- Set angle sander 2000W230mm disk diameter, 3 metal

Features:5-piece machine setin a mobile casewith a telescoping handle

NEW

25

Drilling, screwing, sawing, cutting and grinding

5-piece tool setsElectric drill, cordless screwdriver, jigsaw, angle grinder and orbital sander

The ideal machine set in a practical trolley for all mobile DIY work.

DWG 200Double grinder


Mains: 230 V~50 HzRating: 400 WGrinding disc size: 200 x 20 x 32 mmIdling speed: 2,950 rpm

Features:1 fine grinding disc1 coarse grinding disc2 tool supports2 spark guards


Features:1 wet grinding disc1 dry grinding discWater bath containerSpark guardTool support

Mains: 230 V~50 HzRating: 400 WWet disc: 200 x 40 x 20 mmDry disc: 150 x 20 x 12.7 mmIdling speed of wet disc: 134 rpmIdling speed of dry disc: 2,950 rpm

DWG 150Double grinder


Mains: 230 V~50 HzRating: 150 WSpeed: 2,950 rpmDry disc: 50 x 16 x 12.7 mm

Features:1 fine grinding disc1 coarse grinding disc2 tool supportsSpark guard

WDG 150/200Wet & dry grinder

26

Wet & dry grinders

Double grindersfor wet and dry grinding

Compact, powerful double grinder for wet and dry work.Sturdy, compact metal casing with grinding shafts mounted in ball bearings.The powerful motor ensures smooth, non-vibration working and excellent results.

Tile cutters and stone cutting machine

Sawing units

Column drills

Compressors

Paint sprayers

Welding sets

Mac

hine

tool

sCo

mpr

esso

rs SWISSM [email protected], w w w.swissm.ch

2008

Compact tile cutter for private and commercial use

This compact tile cutter is ideal for large scale tiling work at home.The precise, adjustable bench with parallel stop and diagonal stop allows floor and wall tiles to be cut precisely and cleanly.The high speed diamond disc runs in a water bath to ensure that the cutting work generates virtually no dust.

TCM 600-180Tile cutter

Optional accessories: Diamond cutting disc 180 x 22,2Article number: 110.110.010

Mains: 230 V~50 HzRating: 600 W – S2Speed: 3,000 rpmCutting heigh: 35 mmBench size: 330 x 360 mmDiamant disc: 180 x 22.2 mm


Features:Diamond disc: 180 mmParallel stopPivot-mounted bench

28

Cutting tiles and natural stone

SSCM 1500-250Stone cutting machine

Optional accessories: Diamond cutting disc 250 x 25.4 mm

Mains: 230 V~50 HzRating: 1,500 W S2Speed: 3,000 rpmCutting depth: 65 mm at 90° 48 mm at 45°Cutting lenght: 570 mmBench size: 960 x 530 mmDiamant disc: 250 x 25.4 mmCutting angle: 0-45°


Features:Steel bench with rubber coatingAluminium guideSturdy sub-frameMotor mounted in four ball bearingsAttachable sub-frameIntegral water pumpMotor can be pivoted infinitely from 0°-45°Integral transit guards

29

Cutting tiles and natural stone Cutting tiles and natural stone

Professional tile and stone cutting machines for commercial use

Compact, transportable tile and stone cutting machines for longitudinal, mitre, double mitre and jolly cuts. Sturdy, textured bench with workpiece stop and adjustable angle stop. Motor carriage mounted in four ball bearings with replaceable diamond cutting disc. The precision mounting of the motor and the integral water bath with coolant pump makes precision cutting with clean results and virtually no dust possible.These cutting machines are suitable for all stone and tile work, such as:Cutting kerbstones, foundation slabs, steps, tiles made of natural and synthetic stone as well as ceramic tiles.

SSCM 800-200-3 SSCM 600-180-1Stone cutting machine

Optional accessories:Diamond cutting disc: 200x25.4 mm (SSCM 800-200-1) Article number: 110.210.010 Diamond cutting disc: 180x25.4 mm (SSCM 600-200-1)

Article number: SSCM 800-200-3 110.200.021 EAN-Code: 4250116893430

Article number: SSCM 600-180-1 110.200.030 EAN-Code: 4250116892891

Features:Steel bench with rubber coatingAluminium guideSturdy sub-frameMotor mounted in four ball bearings Attachable sub-frame Large water capacityIntegral water pumpMotor can be pivoted infinitely from 0°-45°Integral transit guardsFoot level adjustment

SSCM 800-200-3 SSCM 600-180-1Mains: 230 V~50 Hz 230 V~50 HzRating: 800 W 600 WSpeed: 2,950 rpm 3,000 rpmCutting depth: 30 mm at 90° 25 mm at 90° 25 mm at 45° 17 mm at 45°Cutting lenghth: 560 mm 460 mmWorking height: 690 mm 690 mmBench size: 830 x 430 mm 730 x 410 mmDiamant disc: 200 x 25.4 mm 180 x 25.4 mmCutting angle: 0°-45° 0°-45°

Mains: 230 V~50 HzRating: 1,200 WIdling speed: 4,500 rpmCarbide metal saw blade: Ø 210 x Ø 18 x1.6 mmCutting angle: 3 x 45°Cutting capacity: at 90°: 130 x 54 mm at 45°: 90 x 54 mm at 2x45°: 90 x 40 mm


Features:Laser guideCarbide metal saw blade – 24 TTurntable with precision angle adjustment from –45° to +45°Sawing head can be pivoted to the left from 0° to 45°Locking position at 15°, 22,5°, 30°, 45°, 90°Bag for chips

30

Crosscutting

Precision drag, crosscut and mitre saw with double shaft design and belt drive

Well-designed, multi-functional drag, crosscut/mitre saw with sturdy double shaft drag moun-ting. This machine contains all the functions of a professional commercial machine. Turntable with angle adjustment – double guide for precise drag cuts – turning handle for a wide range of working positions – Motor-protecting, sturdy belt drive – Double laser cutting guide – Saw blade angle to the left and right, 2 x 45° - Stop extension – Vice with fast-action spindle.

MS 1200-210L/1Crosscut and mitre saw with laser guide

Article number: SMS 1400-216 210.200.133 EAN-Code: 4250116892020

Article number: SMS 2000-250-350 210.200.210 EAN-Code: 4250116892037

SMS 1400-216 SMS 2000-250-350Mains: 230 V~50 Hz 230 V~50 HzRating: 1,400 W 2,000 WIdling speed: 4,500 rpm 4,500 rpmCarbide metal saw blade: ø 210 x 30 x 2,5mm ø 250 x 30 x 2.5mmCutting angle: 0° x 45° 0° x 45°Cutting capacity: at 0°/90° 310 x 65mm 340 x 60mm at 0°/45° 310 x 30mm 340 x 42mm Cutting length: 310 mm 335 mm

Features SMS 1400-216:Carbide metal saw blade 210 mm – 24 TTurntable with precision angle adjustment from –55° to +55°Sawing head can be pivoted to the left from 0° to 45°Bag for chipsBench made of die-cast aluminiumExtra long drag with 310 mm cutting length

Features SMS 2000-250-350:Carbide metal saw blade 250 mm – 30 TTurntable with precision angle adjustment from –55° to +55°Sawing head can be pivoted to the left from 0° to 45°Bag for chipsBench made of die-cast aluminiumExtra long drag with 335 mm cutting length

SMS 1400-216 SMS 2000-250-350Drag crosscut and mitre saws with laser guide

SMS 2000-250-LV SMS 2000-250-block guideDrag/crosscut and mitre saws

Article number: SMS 2000-250-LV 210.200.170 EAN-Code: 4250116891986

Article number: SMS 2000-250-Block 210.200.190 EAN-Code: 4250116892006

Features of the SMS 1400-216:Carbide metal saw blade 210 mm – 24 TTurntable with precision angle adjustment from –55° to +55°Sawing head can be pivoted to the left from 0° to 45°Bag for chipsBench made of die-cast aluminiumExtra long drag with 310 mm cutting length

Features of the SMS 2000-250-350:Carbide metal saw blade 250 mm – 30 TTurntable with precision angle adjustment from –55° to +55°Sawing head can be pivoted to the left from 0° to 45°Bag for chipsBench made of die-cast aluminiumExtra long drag with 335 mm cutting length

SMS 2000-250-LV SMS 2000-250-BlockMains: 230 V ~ 50 Hz 230 V~50 HzRating: 2,000 W 2,000 WCarbide metal saw blade: Ø 250 x 30 x 2.5 mm/36T Ø 250 x 30 x 3.2mm/36TIdling speed: 4,500 rpm 4,500 rpmCutting depth: 0°/90° 510 x 70 mm 300 x 75 mm 45°/90° 360 x 70 mm 210 x 75 mm 0°/45° 510 x 40 mm 300 x 45 mm 45°/45° 360 x 40 mm 210 x 45 mm

With precision block guide

Crosscutting

31

Crosscutting

Precision drag, crosscut and mitre saws with belt drive or double shaft design

Sturdy, multi-functional drag, crosscut and mitre saw with precise aluminium machine bed and double shaft parallel drag guide.Turntable with angle adjustment, saw blade pivots to the left and right, 2 x 45° workpiece support and vice for the safe, clean cutting of wood, metal and plastic.

SMS 2000-305-belt driveDrag crosscut and mitre saw


Mains: 230 V ~ 50 HzRating: 2,000 W belt driveCarbide metal saw blade: ø 305 x 30 x 3.2mm/36TIdling speed: 3,500 rpmCutting angle: 2 x 0° x 45°Cutting capacity: at 0°/90° 340 x 100 mm at 45°/90° 240 x 100 mm at 0°/45° 340 x 43 mm at 45°/45° 240 x 43 mm

Features:Carbide metal saw blade 305 mm – 32 teethTurntable with precision angle adjustment from –55° to +55°Sawing head can be pivoted to the left and right from 0° to 45°Bag for chipsBench made of die-cast aluminium2 bench extensions1 workpiece clampTurning handle for four positionsDouble laser guideFast-action clamp functionBelt drive – precise and accurateFast fixing

TS 800-200Bench circular saw


Features:Parallel stop / Angle stop

Mains: 230 Volt~50 HzRating: 800 WLehrlaufdrehzahl: 2,950 rpmMax. Cutting depth: 40 mmBench size: 500 x 335 mmSaw blade: Ø 200 x 16 mm 20 teeth


TS 1000-205Bench circular saw

Mains: 230 V~50 HzRating: 1,000 WIdling speed: 2,950 rpmBench size: 513 x 400 mm (600)Saw blade: Ø 205 x 16 x 2.5 mmTeeth: 20Cutting depth: at 90° - 43 mm at 45° - 36 mm

32

Universal bench circular saws These compact bench circular saws are suitable for all normal sawing work in a workshop or on a building site. Compact and mobile, they are easy to transport in the case and can be made ready for action in a trice.

Sawing


TST 1500-250/1Bench circular saw with underfloor bench

Features:Die-cast aluminium benchCarbide metal saw blade 250 mm - 36 teethSaw blade angle can be infinitely adjustedSaw blade height can be infinitely adjustedParallel stop with 2 stop heightsLateral stop and mitre stopBench size without extensions: 460 x 625mmBench size with extensions: 625 mm x 925 mm

Mains: 230 V~50 HzRating: 1,500 W-S6Speed: 4,000 rpmSaw blade: Ø 250 x 30 x 3.2 mmMax. cutting height.: 90°: 76 mm, 45°: 60 mmSaw blade height adjustment: Infinite 0-76 mmCutting angle: 0°-45°Bench size: 460 mm x 625 mmBench height: 902 mm


MUTS 1700-210Bench circular saw with underfloor drag

Features:Underfloor dragTextured benchCarbide metal saw blade 210 mm - 26 teethParallel longitudinal stopHeight adjustmentPivots through 45°Scale in millimetresEmergency stop safety switchAdapter for dust extraction including hoseSub-frame

Mains: 230 V~50 HzRating: 1,700 W S6-40%Carbide metal saw blade: Ø 210 x 30 x 2.8Idling speed: 4,300 rpmCutting depth: 0°/90° – 62 mm 0°/45° – 40 mmDrag length: 210 mmBench size: 661 mm x 608 mmBench height: ca. 900 mm

Sawing

33

Bench circular saws

Compact, precise and universal bench circular saw for normal sawing work with parallel stop and angle stop.

MUTS 1700-210Underfloor drag device for sawing a stationary workpiece.

Sawing

34

Duo-CutCrosscut bench circular saw with sub-frame


Features:Die-cast aluminium benchFour feet, attachableParallel and angle stopEmergency power safety switchDust bagHeight and angle adjustment

Combination bench circular saw/ crosscut and mitre saw

2-in-1, combination machine for circular and crosscut sawing.Simple adjusting the saw bench creates a full bench circular saw or a convenient crosscut and mitre saw with all the benefits of a solo machine. This compact, easy to transport machine is perfect for site assembly work.

Sawing, crosscutting, mitre sawing

Mains: 230 V~50 HzRating: 1,800 WCarbide metal saw blade: Ø 250 x 30 x 3.2 mm 36 teethIdling speed: 4,500 rpmBench size: 510 x 470 mmBench circular saw cutting depth: 90° – 65 mm 45° – 40 mmCrosscut and mitre saw cutting depth: 0°/90° – 130 x 65 mm 45°/90° – 90 x 65 mm 0°/45° – 130 x 40 mm 45°/45° – 90 x 40 mm

BS 250 BS 350Band saw

BS 250 BS 350Mains: 230 V~50 Hz 230 V~50 HzRating: 250 W 350 WMax. cutting depth: 40 mm 80 mmMax. cutting width: 150 mm 190 mmBench size: 240 x 200 mm 300 x 300 mmBend length: 1,085 mm 1,425 mmBend width: 3.5 mm 6.35 mm

Article number: BS 250 130.300.110 EAN-Code: 4250116893041

Article number: BS 350 130.300.100 EAN-Code: 4250116892938

Features:Solid metal casingAluminium benchAluminium parallel stopsSaw bench can be angled from 0-45°3-point roller saw band guide

Sawing

Band saws for wood and metal The wood band saws in the BS series are notable for their precise 3-roller saw band guide and a solid, pivot-mounted aluminium saw bench with longitudinal and angle stop.Their smooth, low noise action makes them ideal for sawing in hobby rooms.

Sturdy, compact metal bow saw for workshops and installation contractors.Precise saw band guide using simple saw band clamp adjustment, heavy duty machine vice and base frame.

MCS 400Metal band saw


Features:Automatic cut-outLongitudinal stopSturdy sub-frameClampSafety switchPivot-mounted head 0-45°Adjustable saw blade guide

Mains: 230 V~50 HzRating: 400 WSpeed: 1,450 rpmBend length: 1,300 mmBend width: 12.5 mm Max. cutting depth: 90° round material 90 mm 90° square material 85 x 85 mm 45° round material 40 mm 45° square material 38 x 38 mm

Sawing, crosscutting, mitre sawing

35

36

Crosscutting

Metal crosscut saw Powerful, safe crosscut saw with high torque and low speed.The perfect saw for building sites and workshops for cutting a wide range of metal sections, band steel, pipes, etc.Safe to use with adjustable vice and cutting disc safety cover.

MMS 2000Metal crosscut saw


Features:Spindle lockMachine vice with fast adjustmentDepth stopDust extraction

Mains: 230 V~50 HzRating: 2,000 WSpeed: 3,900 rpmMitre cut: 0-45°Saw thickness: 100 mm in diameterSaw width for square material: 70 x 170 mm

DP 350-13 DP 500-16Column drills

Article number: DP 350-13 120.600.100 EAN-Code: 4250116892914

Article number: DP 500-16 120.600.110 EAN-Code: 4250116893034

Features:5 drilling speedsChuck guardDepth stopPowerful motor

DP 350-13 DP 500-16Mains: 230 V~50 Hz 230 V~50 HzRating: 350 W 500 WDrilling capacity: Ø 13 mm Ø 16 mmSpindle: MT2 MT2Spindle deflection: 46 mm 46 mmSpeed: 5/580-2,650 rpm 9/280-2,350 rpmMax. spindle shaft/head distance 104 mm 115 mmBench size: 160 x 160 mm 170 x 170 mmBase size: 314 x 200 mm 320 x 198 mm

SB 400 SB 600Column drills

Article number: SB 400 120.600.120 EAN-Code: 4250116893751

Article number: SB 600 120.600.130 EAN-Code: 4250116893768

SB 400 SB 600Mains: 230 V~50 Hz 230 V~50 HzRating: 350 W 500 WDrilling capacity: Ø 13 mm Ø 16 mmSpindle: MT2 MT2Spindle deflection: 50 mm 60 mmSpeed: 5/580-2650 rpm 12/425-2545 rpm 5/760-3100 rpm 12/510-3140 rpmMax. spindle shaft/head distance 102 mm 126 mmBench size: 152 x 170 mm 200 x 200 mmBase size: 320 x 190 mm 380 x 250 mm

Column drills High quality, powerful column drills for drilling a wide range of materials. Easy to use. Reliab-le and durable with a powerful motor and 3-way belt drive to set a wide range of speeds. The height-adjustable drilling bench, hinged transparent drilling guard and sturdy metal stand ticks all the boxes.

37

Drilling

Crosscutting

Metal crosscut saw Powerful, safe crosscut saw with high torque and low speed.The perfect saw for building sites and workshops for cutting a wide range of metal sections, band steel, pipes, etc.Safe to use with adjustable vice and cutting disc safety cover.

MMS 2000Metal crosscut saw


Features:Spindle lockMachine vice with fast adjustmentDepth stopDust extraction

Mains: 230 V~50 HzRating: 2,000 WSpeed: 3,900 rpmMitre cut: 0-45°Saw thickness: 100 mm in diameterSaw width for square material: 70 x 170 mm

Spraying, blowing, grinding, screwing, drilling

Compressor set for universal use

Compact mobile compressed air compressors for all conventional pneumatic tools such as spray guns, hammer-action screwdrivers, nail guns, tyre inflators and much more.Long life motor with aluminium compressor unit, effective air cooling to relieve the strain on the motor, sturdy steel tank with condensation drain, pressure reducer with pressure gauge and standard compressed air connector.

AC 2000-25Compressor (induction motor)


Mains: 230 V~50 HzMotor rating: 1,500 W – 2 PSIntake capacity: 200 l / min.Max. pressure: 8 barIdling speed: 2,850 rpmTank capacity: 24 litres

Features:Pressure controllerPressure gauge2 pressure connectorsMobileSafety valve

38

AC 2000-25-2 Compressor (universal motor)


Mains: 230 V~50 HzMotor rating: 1,500 W – 2 PSMotor: Universal motorIntake capacity: 200 l / min.Max. pressure: 8 barIdling speed: 2,850 rpmTank capacity: 24 litres

Features:Tank capacity: 24 litresIntake capacity 206 litres / min.with pressure reducerPressure gauge2 quick-action connectorsCoupling


Compressor set for universal use

Compact module compressed air compressor for all conventional pneumatic tools. Including tool set with spray gun, blow gun, tyre inflator and spiral extension hose.Long life motor with aluminium compressor unit, effective air cooling to relieve the strain on the motor, sturdy steel tank with condensation drain, pressure reducer with pressure gauge and standard compressed air connector to meet high workshop demands.

39

AC 2100-50 Compressor

Mains: 230 V~50 HzMotor Rating: 1,500 W – 2 PSIntake capacity: 210 l / min.Max. pressure: 8 barIdling speed: 2,850 rpmTank capacity: 50 litres


Features:Pressure controllerPressure gauge2 pressure connectorsMobileSafety valve

AC 12Car Tyre Inflator

Technical data:-Power supply with 12 V cigarette lighter socket-Operting Pressure max 18 bar-Air capacity max 4,5 l/min-Weight: 0,7 kg-Packing dimension 165 x 80 x 145 mm


Features:Pressure gauge 0 to 18 barr2,9 m connection cable (12 V) with cigarette lighter socketAir hose with quick locking-valve3 pcs spare adapters (water ball-, air bed-, ball adapter)

5-piece pneumatic tool set Article number: 180.200.010 EAN-Code: 4250116890699

Compressed air hose


Compressed air hose


Blowing gunArticle number: 180.200.013 EAN-Code: 4250116893911

Tyre inflators Article number: 180.200.014EAN-Code: 4250116893928

Sand-blasting gunsArticle number: 180.200.015EAN-Code: 4250116893835

Underseal gunsArticle number: 180.200.016EAN-Code: 4250116893842

Ratchet screwdriver setArticle number: 180.200.034EAN-Code: 4250116893959

Hammer-action screwdriver setArticle number: 180.200.044EAN-Code: 4250116893966

Hammer-action chisel setArticle number: 180.200.054EAN-Code: 4250116893973


Professional compressor accessories

We specialise in universal DIY and commercial compressors and offer an extensive range of accessories for all the compressor tools needed at home, for hobbies and by tradesmen.

40

10 m 5 m PU

CP 450Paint spray unit


Mains: 230 VRating: 450 WAir intake capacity: 1,500 l / min.Operating pressure: 0.15 bar

Features:Compressor with adjustable spray gunHose length: 1.5 mGun: 1 lIncludes viscosimeterAdapter with connectors for inflating boats and balls.Carry strap

Underseal gunsArticle number: 180.200.016EAN-Code: 4250116893842

Hammer-action chisel setArticle number: 180.200.054EAN-Code: 4250116893973

Painting, glazing

Painting set Practical painting set with quiet compact compressor and ergonomic paint spray gun with adjustable nozzle. The high performance compressor guarantees an excellent spraying result thanks to its large air volume.The set contains a viscosimeter and an extension hose for the spray gun to ensure outstan-ding results.

41

Welding

Electric welding sets

EWS 200Combination welding set

Compact electric welding sets for manual arc welding for use at home, in garages and workshops. The high performance transformer with cooling fan provides a long duty cycle and a steady arc. The infinite welding current regulation with optical display of the electrode thickness relative to the current strength means that even beginners can produce perfect welding results.


Mains: 230 V/400 V~50 HzWelding current: 60 – 200 AInsulation class: H-IP21Duty cycle: 10 % EDElectrodes: 1.5 – 4 mmIdling voltage: 48 V

Features:MobileInfinitely adjustable welding currentElectrodes from 1.5 – 4 mmCan be switched from 230 V to 400 VFan coolingEarth cableElectrode cable and holderWelding shield, hammer and brush

EWS 160Electric welding set


Mains: 230 V~50 HzWelding current: 45 – 160 AInsulation class: H-IP21Duty cycle: 10 % EDElectrodes: 1.6 – 3.25 mmIdling voltage: 48 V

Features:PortableInfinitely adjustable from 45 – 160 AEarth cableElectrode cable with holderFan coolingWelding shield, hammer and brush

EWS 150Electric welding set

Mains: 230 V~50 HzWelding current: 45 – 100 AInsulation class: H - IP21Duty cycle: 10 % EDElectrodes: 1.6 – 2.5 mmIdling voltage: 48 V


Features:PortableInfinitely adjustable from 45 – 100 AEarth cableElectrode cable with holderFan coolingWelding shield, hammer and brush

42

Welding

MIG-MAG welding sets,inverters

Compact shielding gas welding sets for arc welding for use at home, in garages and work-shops. The high performance transformer with cooling fan provides a long duty cycle and a steady arc. The precisely adjustable wire feed ensures uniformed welds and good welding quality.

43

MAG 140Shielding gas welding set

Mains: 230 V~50 HzWelding current: 36-120 AInsulation class: HProtection type: IP21Welding wire thickness: 0.6-0.8 mmIdling voltage: 34 V


Features:Sturdy sheet steel casing with rubber impact guardWelding current adjustmentLevel settingAdjustable wire feedWelding electrode cableWelding shield, hammer and brush

MIG-MAG 160Shielding gas welding set


Features:Sturdy sheet steel casing with rubber impact guardWelding current adjustmentLevel settingAdjustable wire feedFan coolingMobile with 2 wheelsWelding electrode cableWelding shield, hammer and brush

MIG-MAG 200Shielding gas welding set

Mains: 230 V-400 V~50 HzWelding current: 65-200 AInsulation class: HProtection type: IP21Welding wire thickness: 0.6-1.2 mmIdling voltage: 36.5 V


Features:Sturdy sheet steel casing 5 welding settingsVariable wire feedFan coolingRemovable hose packageWelding electrode cableWelding shield, hammer and brush

EWS 250 - 230/ 400 V

Rated Input Voltage 230V/400V 1ph/50HzNo -load Voltage 50 V Input Capacity 14KVA Current Range 65-250Protection Class IP 21Insulation Class H

Article number: EWS 250

Features:Cooling FanWelding cableWelding shieldhammer and brushElectrode TorcProtective Mask

Mains: 230 V~50 HzWelding current: 60-140 AFuse: 10 AInsulation class: HProtection type: IP21Welding wire thickness: 0.5-0.8 mmIdling voltage: 35 V

Generators with alternating current

Hoist

Pressure washers

Wet & dry vacuum cleaners

Gene

rato

rs / H

oist

Pres

sure

was

hers

/ Wet

& dr

y vac

uum

clea

ners


2008

Power generation

Petrol synchronous generator Compact generator to generator 230 V alternating current. Economical petrol engine with effective air cooling provides reliability, requires no maintenance and generates electricity in the event of a power failure.The reliable power source for holiday homes and summerhouses, for camping and on boats – in fact anywhere without a power supply.

PG 810Generator

Voltage (output): 230 V~50 HzMax. rating: 800 WPermanent rating: 650 WEngine type: 2-stroke air-cooledMax. engine power: 2 PSIdling speed 3,600 rpmDisplacement: 63 ccTank capacity: 4.2 lFuel typ: 1:50 Weight: 24.5 kgGenerator mode: Synchronous


Features:1 x 230 V socketOverload switchChokeCarry handleStart with pull-cord

45

PG 3010 and PG 2200Generator

PG 3010 PG 2200Voltage (output): 230 V~50 Hz 230 V~50 HzMax. rating: 2,800 W 2,200 WPermanent rating: 2,500 W 2000 WMax. engine power: 6.5 bhp 5.5 bhpIdling speed: 3,600 rpm 3,000 rpmTank capacity: 15 l 15 lGenerator mode: Synchronous SynchronousEngine type: 4-stroke 4-stroke air-cooled air-cooledConsumption/h: 2.15 lOil capacity: 0.6 l

Article number: PG 3010 160.100.124 EAN-Code: 4250116891771

Article number: PG 2200 160.100.105

Features:Overload protection2 x 230 V socketsLow oil guardTank indicatorVoltmeterMobile (PG 3000F only)

46

Petrol synchronous generators Compact generators to generator 230 V alternating current. Economical petrol engines with effective air cooling provide reliability, require no maintenance and generate electricity in the event of a power failure.The reliable power source for holiday homes and summerhouses, for camping and on boats – in fact anywhere without a power supply.

Power generation

47

StromerzeugungPower generation

Petrol synchronous generator Compact generator to generate 12 V direct current, 230 V alternating current and 400 V heavy current. Economical petrol engine with effective air cooling provides reliability, requires no maintenance and generates electricity in the event of a power failure.The reliable power source for holiday homes and summerhouses, for camping and on boats – in fact anywhere without a power supply.Electric starter ensures that the generator starts easily.

PG 5510Generator

Voltage (output): 230 V~50 HzMax. rating: 5,500 WPermanent rating: 5,000 WMax. engine power: 13 bhpIdling speed: 3,600 rpmTank capacity: 25 lGenerator mode: SynchronousEngine type: 4-stroke air-cooledConsumption/h: 2.95 lOil capacity: 1.1 l


Features:Overload protection2 x 230 V sockets1 x 400 V socketLow oil guardTank indicatorElectric startVoltmeterMobile

Includes 12 V batteryIncludes 12 V output

EH 1600/1000Hoist


Features:Safety control switch with immediate stopSecured with two double clipsReturn roller with load hookMotor with thermal switch

EH 900-500Hoist


Features:Safety control switch with immediate stopAutomatic brake (Secure the weight at any height)Motor with thermal switchReturn rollers with load holder and additional safety spring hook

EH 500-250Hoist



Rating: 500 WLifting capacity: 100 kg without return roller 200 kg with return rollerLifting height: 12 m without return roller 6 m with return rollerSteel cable: ø 4 mmSteel cable length: 12 m

Rating: 1,000 WLifting capacity: 250 kg without return roller 500 kg with return rollerLifting height: 12 m with return roller 6 m without return rollerSteel cable: ø 4 mmSteel cable length: 12 m

Mains: 230 V~50 HzRating: 1600 WTragkraft: 500 kg without return roller 1,000 kg with return rollerLifting height: 12 m without return roller 6 m with return rollerCable speed: 10 m/min without return roller 5 m/min with return roller

48

Electric hoists Powerful, compact winches for universal use on sites, in workshops and in garages. High safety standard using remote control with EMERGENCY STOP, a powerful motor, large brake to secure the load at any height and automatic limit switch with mechanical IMMEDIATE STOP.Increased safety:No uncontrolled turning of the elevated load since the steel cables are “non-rotating”.

Lifting

EH 1600/1000Hoist


Features:Safety control switch with immediate stopSecured with two double clipsReturn roller with load hookMotor with thermal switch

EH 900-500Hoist



EH 500-250Hoist



Rating: 500 WLifting capacity: 100 kg without return roller 200 kg with return rollerLifting height: 12 m without return roller 6 m with return rollerSteel cable: ø 4 mmSteel cable length: 12 m

Rating: 1,000 WLifting capacity: 250 kg without return roller 500 kg with return rollerLifting height: 12 m with return roller 6 m without return rollerSteel cable: ø 4 mmSteel cable length: 12 m

Mains: 230 V~50 HzRating: 1600 WTragkraft: 500 kg without return roller 1,000 kg with return rollerLifting height: 12 m without return roller 6 m with return rollerCable speed: 10 m/min without return roller 5 m/min with return roller

49

Pressure washing

Powerful pressure washers Portable/mobile compact and very powerful units for cleaning a very wide range of surfaces. For washing cars, cleaning facade, preparing for coatings and removing dirt from places with difficult access. High performance for cleanliness and hygiene at home, in the garage, in workshops and for agriculture.Complete with high pressure hose and detergent tank.

HPC 1850-160Pressure washer

Mains: 230 V~50 HzRating: 1,850 WOperating pressure: 90 bar, max. 160 bar

Water capacity: 6 l / min.


Features:3-cylinder steel pumpRoll-up pressure hose, 5 mSpray lance with adjustable nozzleAuto-StopUniversal motorMobileMixing tank

HPC 1400-120Pressure washer


Features:Universal motorSteel pumpPressure hose, 5 mLance with adjustable nozzleMixing tank

Mains: 230 V~50 HzRating: 1,400 WOperating pressure: 70 bar up to max. 120 barWater capacity: 5 l / min

HPC 2200-160 HPC 1800-180Pressure washer

HPC 2200-160 HPC 1800-180Motor: Universal motor Induction motorMains: 230 V~50 Hz 230 V~50 HzRating: 2,200 W 1,900 WOperating pressure: 110 bar 110 bar up to max. 160 bar up to max. 160 barWater capacity 6l/min 6l/min

Article number: HPC 2200-160 150.200.034 EAN-Code: 4043722000077

Article number: HPC 1800-180 150.200.024 EAN-Code: 4250116801541

Features HPC 2200-160:3-cylinder steel pumpUniversal motorPressure hose, 5mSpray lance with adjustable nozzleMobileMixing tankAutomatic cut-outFeatures of HPC 1800-180:3-cylinder steel pumpInduction motorPressure hose, 5mSpray lance with adjustable nozzleMobileMixing tankAutomatic cut-out

Pressure washing

Powerful pressure washers Portable/mobile compact and very powerful units for cleaning a very wide range of surfaces. For washing cars, cleaning facade, preparing for coatings and removing dirt from places with difficult access. High performance for cleanliness and hygiene at home, in the garage, in workshops and for agriculture.Complete with high pressure hose and detergent tank.

50

WDCN 1000-15-L15L Vacuum cleaner


Features:three pieces pipelong-squae nozzleshort nozledust paper bagsponge filterFlxible hose: 1.5 m

Mains: 230 V~50 HzRating: 1,000 WWater column: 1,500 mmTank: 15 lCabel 4MCase NIROVacuum Rate >=14KPa

VC 1250-20L VC 1400-20LWet & dry vacuum cleaners

Article number: VC 1250-20L 150.100.104 EAN-Code: 4250116893119

Article number: VC 1400-20L 150.100.114 EAN-Code: 4250116893126

Features:1 combination brush for carpets and smooth flooring1 crevice nozzle, 1 wet filter1 dirt bag1.5 m hose, 36 mm4 wheels2 extension tubesSuck/blow function switchover point

VC 1250-20L VC 1400-20LMains: 230 V~50 Hz 230 V~50 HzRating: 1,250 W 1,400 WCapacity: 20 l 20 lSuction capacity: >=16,5 KPa >=18 KPaTank: Stainless steel Stainless steelCable: 4 m 4 m

Universal wet & dry vacuum cleaner with outstanding suction power and a functional design

Compact, powerful industrial vacuum cleaners with anti-tipping chassis, durable motor with suck and blow function and practical accessories.

51

Wet & dry vacuuming

VCW 1250-20LWet & dry vacuum cleaners

Mains: 230 V~50 HzRating: 1,250 WCapacity: 29 lSuction capacity: >= 16.5 KPaTank: Stainless steelCable: 4 mMulti-function chassis with two castors


Features:Dual function combination brush for carpetsand smooth flooring1 crevice nozzle1 wet filter1.5 m hose, 36 mm1 long life pleated filter1 telescopic suction tubeSuck/blow function switchover point

VCW 1400-30L VCW 1400-30L EWet & dry vacuum cleaners

Article number: VCW 1400-30L 150.100.134 EAN-Code: 4250116893140

Article number: VCW 1400-30L E 150.100.144 EAN-Code: 4250116893157

Features:Dual function combination brush for carpets and smooth flooring1 crevice nozzle, 1 wet filter1.5 m hose, 36 mm1 long life pleated filter1 stainless steel telescopic suction tubeSuck/blow function switchover point

VCW 1400-30L VCW 1400-30L EMains: 230 V~50 Hz 230 V~50 HzRating: 1,400 W 1,400 WCapacity: 30 l 30 lSuction capacity: >=18 KPa >=18 KPaTank: Stainless steel Stainless steelCable: 4 m 4 mElectric socket: No Yes Multi-function chassis: Yes Yes2 castors: Yes Yes

VCW 1400-50L EWet & dry vacuum cleaners

Mains: 230 V~50 HzRating: 1,400 WCapacity: 50 lSuction capacity: >= 18 KPaTank: Stainless steelCable: 4 mMulti-function chassis with two castors


Features:Dual function combination brush for carpetsand smooth flooring1 crevice nozzle1 wet filter1.5 m hose, 36 mm1 long life pleated filter1 telescopic suction tubeSuck/blow function switchover pointElectric socket with slow-down functionWater drain valve

Wet & dry vacuuming

Universal wet & dry vacuum cleaner with outstanding suction power and a functional design

Compact, powerful industrial vacuum cleaners with anti-tipping chassis, durable motor, with suck and blow function and practical accessories.

52

VCW 1400-30L E - with Synchro socket

Trimmer and motor scythe

Electric lawn mower and electric cultivator

Cordless grass shears

Electric and petrol hedge cutters

Electric chainsaw

Domestic waterworks

Garden pump

Dirty water pump

Leaf blowers

Garden hoeGard

en eq

uipm

ent


2008

Lawn trimming

Electric lawn trimmers

RT 550DLawn trimmer

Powerful, lightweight units for cutting grass on small areas, for path maintenance and for cutting grass in places where access is difficult for a lawn mower. With replaceable double line spool and automatic line extension. Ergonomic, fatigue-free use thanks to an adjustable additional handle.


Mains: 230 V~50 HzRating: 550 WSpeed: 10,000 rpmCutting circle: Ø 320 mmLine diameter: 1.6 mmLine length: 8 m

Features:Twin line automatic jog system2. HandleCable strain relief clampTelescopic handleAngle adjustmentTurning handle

RT 280-21Lawn trimmer

Mains: 230 V~50 HzRating: 280 WSpeed: 10,000 rpmCutting circle: Ø 210 mmLine diameter: 1.2 mmLine length: 10 m


Features:Twin line automatic jog system2nd handleCable strain relief clamp

54

Trimming lawns, cultivating

BMT 700Petrol motor trimmer


Rating: 700 WEngine type: 26cc 2-stroke engineCutting circle: Ø 380 mm

Features:Line diameter: 2 mm Automatic jog systemCarry strapAdjustable handle

BMS 900 BMS 900 TPetrol motor scythe

BMS 900 BMS 900 TRating: 0.9 kW 0.9 kWEngine type: 33cc 2-stroke engine 33cc 2-stroke engineCutting circle: 380 mm with line 380 mm with lineLine diameter: 2 mm 2 mmCutting circle with blade 3-tooth 230 mm 3-tooth 230 mmTeilbare Welle: No Yes

Article number: BMS 900 310.750.020 EAN-Code: 4250116806737

Article number: BMS 900 T 310.750.040 EAN-Code: 4250116891924

Features:Twin line with automatic jog systemBike handleCarry strapPatented easy start system

Lightweight, powerful motor scythes

Powerful motor scythes with combination head for twin line spool or cultivating blades.Reliable start with manual petrol injectionLightweight, ergonomic handling with compact motor head and double handle that can be adjusted to the user’s body size with safety ON/OFF switch and adjustable shoulder strap. The perfect maintenance unit for lawns, meadows and uncultivated land.

55

BMS 900 T with split shaft

LS 1200-330Electric cultivator

Rating: 1,200 WWorking width: 33 cmGrass box: 30 l - textileNo. of blades: 20Blade thickness: 2 mmFront wheels: Ø 200 mm Rear: Ø 50 mm roller


Features:Ergonomic, folding guide handleBall bearing mounted blade shaft with steel blades3 height settings

Lawn care

Electric lawn mowers Electric cultivators

Low cost, simple and safe to use. Low noise level does not annoy the neighbours. Comfortable to use with grass box and cutting height adjustment. Lightweight, compact construction, attractive design with durable high performance motors.

ELM 1000-33 ELM 1300-360Electric lawn mowers

ELM 1000-33 ELM 1300-360Mains: 250 V~50 Hz 250 V~50 HzRating: 1,000 W 1,300 WIdling speed: 2,850 rpm 2,800 rpmMotor: Induction motor Induction motorCutting width: 33 cm 36 cmHeight adjustment: 3 settings from 25-70 mmGrass box: 28 l 40 l

Article number: ELM 1000-33 310.200.020 EAN-Code: 4250116805785

Article number: ELM 1300-360 310.200.050 EAN-Code: 4250116892440

Features of the ELM 1300-360:Central height adjustmentErgonomic, folding guide handleCable guideCutting height adjustment from 25 – 70 mm

56

AGS 7.2-70Cordless grass shears


Rating: 7.2 V – 1,200 mAhCharging time: 3-5 hoursCutting width: ø 70 mmOperating time: approx. 70 min

Features:Guide handleWheelsSafety switchCharger

AHT 19-460Battery-Heckenschere


Rating: 19.2 VBattery: 1.7 Ah Ni-CaIdling speed: 1,500 rpmCutting length: 46 cmTooth spacing: 10 mm Bar length: 510 cm Charging time: 1 hour

Features:Hand guardBlades cut on both sides

Cordless lawn care toolsCordless hedge cutter

Our battery-powered grass shears and lawn trimmers are the perfect tools for small gardens and for keeping lawn edges and paths neat and tidy. Complete with chargers, they can be used at any time and then quickly recharged. Lightweight and cordless, they can be used easily and without causing fatigue even by older people.

Lawn care & sawing and wood care

57

AGS 19-240Cordless lawn trimmer


Rating: 19.2 VBattery: 1.7 AhSpeed: 800 rpmCutting circle: 25 cmLine diameter: 1.2 cmCharging time: 1 hour

Features:Twin lineAutomatic jog system2nd handleTelescopic handle1 h charger

HT 520-580 HT 500-555Electric hedge cutter

HT 520-580 HT 500-555Mains: 230 V~50 Hz 230 V~50 HzRating: 520 W 500 WBar length: 570 mm 555 mmTooth spacing: 20 mm 16 mmSpeed: 3,000 rpm 3,000 rpm

Article number: HT 520-580 320.100.020 EAN-Code: 4250116800490

Article number: HT 500-555 320.100.010 EAN-Code: 4250116800483

PHT 500-560Petrol hedge cutter

Engine type: 22 cc – 2 strokeRating: 500 WBar length: 630 mmCutting length: 600 mmTooth spacing: 24 mm


Features:2-hand safety switch with double, counter-rotating safety blades that cut on both sidesBlade coverBar guardPatented easy start system

HT 620-600Electric hedge cutter

Mains: 230 V~50 HzRating: 620 WBar length: 680 mmCutting length: 600 mmTooth spacing: 24 mmSpeed: 3,000 rpm


Features:2-hand safety switch with mechanical immediate stop3-point circuit for extended useCounter-rotating safety blades that cut on both sidesAluminium blade coverImpact guardCable strain relief clampMetal gearboxITS – GS approved

Features:2-hand safety switch with immediate stop (on HT 500-555)with mechanical immediate stop(on HT 520-580)Counter-rotating safety blades that cut on both sidesAluminium blade coverImpact guard, cable strain relief clampMetal gearboxITS – GS approved

Electric and petrol hedge cutters SWISSM hedge cutters are extremely powerful and ergonomically balanced for long, fatigue-free work, even on difficult land.They have a high safety standard with an IMMEDIATE STOP and safe, easy grip two-hand control. The specially hardened blades ensure a perfect cut over a long time. The low vibrati-on and low noise level make hedge cutting easy and prevent fatigue.

58

Cutting and trimming hedges

PCS 42-40Petrol chainsaw


Displacement: 42.5 ccRating: 1.8 kWOil capacity: 260 mlFuel capacity: 550 mlBar length: 45 cmOregon chainCutting speed: 18.5 m/sec

Features:Safety switchLarge hand guardChain guide with return pinionChain catch boltAnti-vibration system

EK 2000-400 Electric chainsawwith chain tensioning without tools

Mains: 230 V~50 HzRating: 2,000 WCutting speed: 13 m/sec.Cutting length: 400 mm


Features:Chain from Carlton or OregonChinese barSturdy claw stopFelling handleAutomatic chain lubricationRecoil guard with mechanical brake2nd mechanical brakeBalanced centre of gravityErgonomic designTÜV – GS approved

Petrol chainsaw, Electric chainsaw

Sturdy, ergonomic, easy to use.The perfect tool for felling and sawing branches.The chainsaws are notable for their high capacity and safety.Ergonomically positioned handles and a perfect centre of gravity mean the saws can be used for a lengthy period without fatigue.

Sawing and wood care

59

With chain tensioning without tools

KS 200Chain sharpener


Features:Rotary clamp 35° to the right/left.Chain fixed by large clamp screws

Mains: 230 V~50 HzRating: 220 WIdling speed: 7,500 rpmGrinding disc: 100 x 4.5 mm

EK 2400-400 wlkElectric chainsawwith chain tensioning without toolsMains: 230 V~50 HzRating: 2,400 WCutting speed: 17 m/sec.Cutting length: 400 mm


Features:Oregon chain + Oregon barSturdy claw stopFelling handleAutomatic chain lubrication

60

Electric chainsaw The electric chainsaws are notable for their high capacity and safety.Ergonomically positioned handles and a perfect centre of gravity mean the saws can be used for a lengthy period without fatigue.The motor has been fitted lengthways to make it more comfortable to work with and for better weight distribution.

Sawing and wood care

With chain tensioning without tools

WW 1200-3800Domestic waterworks


Features:24 l stainless steel tankStainless steel pump casing2-3 bar pressure switchPressure gauge

Mains: 230 V~50 HzRating: 1,200 WDelivery rate: 3,800 l/hDelivery pressure: 5 barMax. intake head: 8 m

WW 600-2800Domestic waterworks


Features:Pressure and intake connection 1”Carry handle20 l steel tank2-3 bar pressure switchPressure gauge

Mains: 230 V ~ 50 HzRating: 600 WDelivery rate: max. 2,800 lDelivery pressure: 4 barMax. intake head: 8 m

61

Domestic waterworks Essential for the independent water supply for irrigating lawns and vegetables as well as supplying water to summerhouses, holiday homes or hunting lodges from a well or water butt. Water can even be extracted from a stream at any time. The storage tank integrated on the pump has an excess pressure switch and pressure gauge to ensure constant water pressure during extraction. In addition the pressure storage tank ensures that the quiet pump switches on less frequently.

Fresh water without mains connection

GPJ 1200-3800Garden pump


Mains: 230 V~50 HzRating: 1,200 WMax. delivery rate: 3,800 l/hMax. delivery head: 50 mMax. delivery pressure: 5 barIntake head: 8 m

Features:Stainless pump casingCarry handleON/OFF switchPressure and intake connection 1”Overload guard

GPJ 600-2800Garden pump


Features:Pressure and intake connection 1”Carry handleON/OFF switch

Mains: 230 V ~ 50 HzRating: 600 WDelivery rate: max. 2,800 lDelivery pressure: 3.5 barIntake head: 8 mWith or without plastic guard for motor

62

High performance garden pumps Our garden pumps enable you to extract water from a wide range of reservoirs such as cisterns, rainwater tanks, garden ponds or a stream with the spray pressure of a water pipe. They are also ideal for draining building trenches or flooded cellars.The high performance pump motors and dirt filters ensure that they will offer a long, trouble-free service life.

High pressure for watering the garden

WWP 400-8000Dirty water pump

Mains: 230 V~50 HzRating: 400 WMax. delivery rate: 7,500 l/hMax. delivery head: 5 mSubmersion depth: 5 mForeign bodies up to: 30 mm


Features:Mains cable: 10 m H05RNFFloat switch1½“ IG pump outletOverload guard


230 V~50 Hz750 W13,000 l/h9 m8 m35 mm

WWP 750-12500Dirty water pump-Niro


Features:Mains cable 10m H07RNFFloat switch1¼“ IG hose connectorOverload guardTÜV – GS approved

Mains: 230 V~50 HzRating: 750 WMax. delivery rate: 12,500 l/hMax. delivery head: 8 mSubmersion depth: 5 mForeign bodies up to: 35 mm

WWP 800-13000Dirty water pump

CWP 250Dirty water pump-Niro


Features:Mains cable: 10 m H05RNFFloat switch1½“ IG pump outletOverload guardTÜV – GS approved

Mains: 230 V~50 HzRating: 250 WMax. delivery rate: 6,500 l/hMax. delivery head: 5,5 mSubmersion depth: 5 mForeign bodies up to: 3 mm

63

Submersible motor pumps for dirty water

Powerful dirty water pumps for draining ponds, cellars, garden fountains or flooded building trenches and pumping water from rainwater tanks into the garden pond and much more.The integral float switch reliably prevents accidental dry operation.

Draining, pumping out and pumping over

EGV 2500Electric leaf blower


Features:3 functions: vacuuming, blowing, shreddingCarry strapLeaf bag 45 lWheels

Mains: 230 V~50 HzRating: 2,500 WBlower speed: max. 275 km/hSuction capacity: 13.5 cbm/minVolume reduction: 10:1

64

Leaf vacuuming and blowing

Leaf blowers Powerful leaf blower with shredder and large debris bag. Easy handling with rollers on the bottom and an adjustable shoulder strap.Can be switched to suction and blowing function. The integral shredder reduces the size of the vacuumed leafs to around 1/10 of its volume. This means that large volumes of leafs can be removed without having to empty the debris bag.

Article number: PMT 40 310.750.010 EAN-Code: 4250116801701

Article number: PMT 50 310.750.050 EAN-Code: 4250116893744

PMT 40 PMT 50Garden care hoes

PMT 40 PMT 50Motor: 1-cyl, 4-stroke 1-cyl, 4-stroke OHV, 118 cc OHV, 163 ccRating: 2.93 kW / 4 PS 3.5 kW / 4.76 PSWorking width: 36 cm 56 - 60 cmTank capacity: 1.6 l

Features PMT 40/PMT 50:Hoe blades: 4 x 26 cm diameterFuel: Unleaded petrolDead man’s controlGuide wheel

65

Loosening soil

Petrol hoes These powerful hoes are designed for turning over even very compacted soil. The sturdy 4-stroke engine and specially designed blades ensure rapid operation and perfect soil loosening.Comfortable projecting handles with throttle lever and IMMEDIATE STOP as well as the slewing guide wheel ensure mobility and easy control of the motor hoe.

SG 3-5Garden sprayer

Max. capacity: 5 lOperating pressure: 3 bar


Features:Carry strapBrass lanceBrass nozzle

EGS 2400Electric shredder

Mains: 230 V~50 HzRating : 2,400 WMax. branch size: 40 mm


Features: Large filling openingSturdy chassis with wheelsMotor brake Motor circuit-breaker

66

Electric garden shreddersGarden sprayers

Powerful and safe garden shredders with automatic branch infeed and sturdy cutting units for shredding hedge and tree cuttings, shrubs and bushes into small pieces for composting.The features of all MATRIX shredders comply with the latest safety standards with a safety motor brake, motor circuit-breaker, large branch hopper with recoil guard. Large wheels provide stability and mobility.

Shredding, composting

plug and work [email protected], www.swissm.ch

SWISSM2008

SWISSM Kanalga Impex GmbHLaettenstrasse 58 5242 BirrSwitzerlandTel: +41 765 393 881 Fax: +41 565 353 791 E-mail: [email protected] www.swissm.ch

SW

ISS

Mp

lug

an

d w

ork

electric tools woodworking garden equipment - · pdf filedrills & hammer drills 4-6...

Documents