electrical accessories catalogue - unicrimp · to the electrical contracting industry a ... cable...
TRANSCRIPT
Welcome to
Unicrimp® is the latest new business to emerge from the successful Scolmore Group of companies. Its formation brings to the electrical contracting industry a comprehensive range of cable accessory products.
Launched under the Qcrimp® brand name and available exclusively through the electrical wholesale trade, the product offering comprises an extensive range of cable management consumables.
All products within the Qcrimp® range are manufactured under stringent quality control systems and are fully compliant with the very latest industry regulations.
The range includes cable ties, crimp terminals, PVC tape, copper tube terminals, cable clips, and brass and nylon glands – providing everything required to harness cable between the consumer unit and the end accessory.
Aligned with the core values of the Scolmore group of companies, Unicrimp® will offer the same levels of outstanding customer service, high quality products and commitment to new product development.
Located close to the Group Headquarters in the Midlands, the new Unicrimp® distribution centre is ideally located to supply to all areas of the UK.
...a comprehensive range of cable accessories.
Product Overview
Pre-Insulated Terminals
Accessories
Cable Ties
Cable Clips Cable Cleats
Lock-Off Kits
Fixings Regs Books
Tradesman Tubs
ToolsAdhesives
Brass Cable Glands
Copper Tube Terminals
Cable Tie Accessories
Nylon Cable Glands
Rings, push-ons, spades, blades, butts, pins, heat shrink butts, bullets, available in red, blue & yellow.
Nylon and stainless steel cable ties available in a
Available in a range of colours and sizes. Available in a range of colours and sizes.
Available in 2 different kits.
toggles & nuts/washers.
IET wiring regs book and on-site guide.
strippers and tensioning tools.
Industrial brass glands in a variety of sizes.
Available in a range of sizes
Eyelets, cradles, 2-way cable tie
IP68 nylon glands available in a range of
03
21
07
22
13
23
19
29
09
22
15
23
18
28
PVC Insulating Tapes
plasticised insulation tape. 20
3121 call: 01827 300600 fax: 01827 300620 email: [email protected] visit: www.unicrimp.com call: 01827 300600 fax: 01827 300620 email: [email protected] visit: www.unicrimp.com
43 call: 01827 300600 fax: 01827 300620 email: [email protected] visit: www.unicrimp.com call: 01827 300600 fax: 01827 300620 email: [email protected] visit: www.unicrimp.com
Pre-Insulated Terminals
Part Number Stud Size Pack Qty
QRF3 100
QRF3N 100
QRF4N 100
QRF5 100
QRF6 100
Part Number Dia x Length mm Pack Qty
QRBL10 100
QRBL14 100
QRBL18 100
Part Number Pack Qty
QRB 100
Part Number Pack Qty
QHSB1 100
Spade Blade
ButtHeat Shrink Butt
Part Number Stud Size Pack Qty
QRR3 100
QRR37 100
QRR4 100
QRR5 100
QRR6 100
QRR8 100
QRR10 100
QRR12 100
Ring
PinPart Number Dia x Length mm Pack Qty
QRP12 100
Part Number Tab Size mm Pack Qty
QRPO28M5 100
QRPO28M8 100
QRPO48M5 100
QRPO48M8 100
QRPO63M 100
Male Push-on
Si P k Qt th P k QtP k Qt
th P k QtPart Number Tab Size mm Pack Qty
QRPOA63 100
Part Number Bullet Dia mm Pack Qty
QRAB4F 100
Part Number Bullet Dia mm Pack Qty
QRAB4M 100
Female BulletMale Bullet
Part Number Tab Size mm Pack Qty
QRFPO28F5 100
QRFPO28F8 100
QRFPO48F5 100
QRFPO48F8 100
QRFPO63F 100
Female Push-onFully Insulated
P k Qt
ed
et
Part Number Tab Size mm Pack Qty
QRPO28F5 100
QRPO28F8 100
QRPO48F5 100
QRPO48F8 100
QRPO63F 100
Female Push-on
e mm Pack Qty
Push-onConnector
Cable size range: 0.5-1.5mm sq.19A 600V
Cable size range: 0.5-1.5mm sq.19A 600V
Cable size range: 0.5-1.5mm sq.10A 600V
Cable size range: 0.5-1.5mm sq.19A 600V
Cable size range: 0.5-1.5mm sq.10A 600V
Cable size range: 0.5-1.5mm sq.10A 600V
Cable size range: 0.5-1.5mm sq.Current rating 10A 600V
Cable size range: 0.5-1.5mm sq.10A 600V
Cable size range: 0.5-1.5mm sq.10A 600V 19A 600V
Cable size range: 0.5-1.5mm sq.19A 600V
Cable size range: 0.5-1.5mm sq.10A 600V
Pre-Insulated Terminals
65 call: 01827 300600 fax: 01827 300620 email: [email protected] visit: www.unicrimp.com call: 01827 300600 fax: 01827 300620 email: [email protected] visit: www.unicrimp.com
Pre-Insulated Terminals Pre-Insulated Terminals
Part Number Tab Size mm Pack Qty
QYPOA63 100
Part Number Bullet Dia mm Pack Qty
QYAB5F 100
Part Number Bullet Dia mm Pack Qty
QYAB5M 100
Female BulletMale Bullet
Push-onConnector
Part Number Tab Size mm Pack Qty
QYFPO63F 100
QYFPO95F 100
Female Push-onFully Insulated
et
P k Q
edPart Number Dia x Length mm Pack Qty
QYBL10 100
QYBL18 100
Blade
Pin
Part Number Tab Size mm Pack Qty
QYPO63F 100
QYPO95F 100
Part Number Dia x Length mm Pack Qty
QYP14 100
Female Push-on
Part Number Tab Size mm Pack Qty
QYPO63M 100
Male Push-on
P k Qt mm Pack Qty
Part Number Pack Qty
QYB 100
Part Number Pack Qty
QHSB5 100
Part Number Stud Size Pack Qty
QYF3N 100
QYF4N 100
QYF5 100
QYF6 100
Heat Shrink Butt
Spade
Butt
Part Number Stud Size Pack Qty
QYR4 100
QYR5 100
QYR6 100
QYR8 100
QYR10 100
QYR12 100
RingS Q
Cable size range: 2.5-4mm sq.37A 600V
Cable size range: 2.5-4mm sq.37A 600V
Cable size range: 2.5-4mm sq.24A 600V
Cable size range: 2.5-4mm sq.37A 600V
Cable size range: 2.5-4mm sq.24A 600V
Cable size range: 2.5-4mm sq.24A 600V
Cable size range: 2.5-4mm sq.24A 600V
Cable size range: 2.5-4mm sq.37A 600V
Cable size range: 2.5-4mm sq.24A 600V
Cable size range: 2.5-4mm sq.37A 600V
Cable size range: 2.5-4mm sq.24A 600V
Cable size range: 2.5-4mm sq.24A 600V
Part Number Dia x Length mm Pack Qty
QBBL9 100
QBBL18 100
Part Number Pack Qty
QBB 100
Part Number Pack Qty
QHSB2 100
Part Number Stud Size Pack Qty
QBF3 100
QBF3N 100
QBF4N 100
QBF5 100
QBF6 100
Spade Blade
Butt
Heat Shrink Butt
Part Number Stud Size Pack Qty
QBR3 100
QBR37 100
QBR4 100
QBR5 100
QBR6 100
QBR8 100
QBR10 100
QBR12 100
Ring
Pin
Part Number Tab Size mm Pack Qty
QBPO48F5 100
QBPO48F8 100
QBPO63F 100
QBPO85F 100
Part Number Dia x Length mm Pack Qty
QBP12 100
Part Number Tab Size mm Pack Qty
QBPO48M5 100
QBPO48M8 100
QBPO63M 100
Male Push-on
P k Qt e mm Pack QtySi P k Q
Female BulletMale Bullet
Female Push-onFully Insulated
Female Push-on
Push-onConnectorPart Number Tab Size mm Pack Qty
QBPOA63 100
Part Number Bullet Dia mm Pack Qty
QBAB4F 100
QBAB5F 100
Part Number Bullet Dia mm Pack Qty
QBAB4M 100
QBAB5M 100
Part Number Tab Size mm Pack Qty
QBFPO48F5 100
QBFPO48F8 100
QBFPO63F 100
et
edP k Q
Cable size range: 1.5-2.5mm sq.24A 600V
Cable size range: 1.5-2.5mm sq.15A 600V
Cable size range: 1.5-2.5mm sq.15A 600V
24A 600V
15A 600V 15A 600V 27A 600V
15A 600V 24A 600V
27A 600V 15A 600V 15A 600V
87 call: 01827 300600 fax: 01827 300620 email: [email protected] visit: www.unicrimp.com call: 01827 300600 fax: 01827 300620 email: [email protected] visit: www.unicrimp.com
Part Number Description Length Width Max. Dia. Pack Qty
QB1-5 25
QB2-5 25
QB4-6 25
QB10 10
QB16 10
QB25 5
QB35 5
QB50 5
QB70 5
QB95 5
QB120 5
QB150 5
QB185 5
QB240 5
Copper Tube TerminalsCopper Tube Terminals
Part Number Cable Size sq mm Stud Size mm dia ØA B D ØE F G H J K Pack Qty
QCT015-3 25
QCT015-4 25
QCT015-5 25
QCT025-3 25
QCT025-4 25
QCT025-5 25
QCT025-6 25
QCT04-6 25
QCT04-8 25
QCT04-10 25
QCT06-4 25
QCT06-5 25
QCT06-6 25
QCT06-8 25
QCT06-10 25
QCT10-5 10
QCT10-6 10
QCT10-8 10
QCT10-10 10
QCT10-12 10
QCT16-6 10
QCT16-8 10
QCT16-10 10
QCT16-12 10
QCT25-5 5
QCT25-6 5
QCT25-8 5
QCT25-10 5
QCT25-12 5
QCT35-6 5
QCT35-8 5
QCT35-10 5
QCT35-12 5
QCT50-6 5
QCT50-8 5
QCT50-10 5
QCT50-12 5
Part Number Cable Size sq mm Stud Size mm dia ØA B D ØE F G H J K Pack Qty
QCT70-6 5
QCT70-8 5
QCT70-10 5
QCT70-12 5
QCT70-14 5
QCT95-8 5
QCT95-10 5
QCT95-12 5
QCT95-14 5
QCT95-16 5
QCT120-8 5
QCT120-10 5
QCT120-12 5
QCT120-14 5
QCT120-16 5
QCT150-8 5
QCT150-10 5
QCT150-12 5
QCT150-14 5
QCT150-16 5
QCT150-20 5
QCT185-10 5
QCT185-12 5
QCT185-14 5
QCT185-16 5
QCT185-20 5
QCT240-10 5
QCT240-12 5
QCT240-14 5
QCT240-16 5
Copper Tube Terminals
Copper Tube Butt Splices
• Finish: Electro tinned• Copper conductivity to 97% IACS• Copper tube double annealed
Note 1Blank terminal palms are available from 10mm² to 240mm².
Note 2
• All terminals up to 240mm² will have bell mouth cable entrance• Working temperature up to 180°C (Standard)• Working temperature with nickel plating up to 350°C (Special)
109 call: 01827 300600 fax: 01827 300620 email: [email protected] visit: www.unicrimp.com call: 01827 300600 fax: 01827 300620 email: [email protected] visit: www.unicrimp.com
Cable TiesCable Ties
Part Number Colour Length Width Max. Dia. Min. Strength Pack Qty
QT80M Natural 8.1kg 100
QTB80M Black 8.1kg 100
QT100M Natural 8.1kg 100
QTB100M Black 8.1kg 100
QTR100M Red 8.1kg 100
QTBL100M Blue 8.1kg 100
QTY100M Yellow 8.1kg 100
QTG100M Green 8.1kg 100
QT120M Natural 8.1kg 100
QTB120M Black 8.1kg 100
QT140MP Natural 8kg 100
QT165M Natural 8.1kg 100
QTB165M Black 8.1kg 100
QT200M Natural 8.1kg 100
QTB200M Black 8.1kg 100
Table A Test Method
Material Nylon 6/6
-40°C to 85°
UL94 V2
25% - 28%
1.3%
Loop Tensile Strength (kgs)
Miniature 8.1kgs
18.2kgs
Standard 22.2kgs
Light Heavy 54.5kgs
Heavy 79.4kgs
113.5kgs
Part Number Colour Length Width Max. Dia. Min. Strength Pack Qty
QTB140MP Black 8kg 100
QT150I Natural 18.2kg 100
QTB150I Black 18.2kg 100
QTR150I Red 18.2kg 100
QTBL150I Blue 18.2kg 100
QTY150I Yellow 18.2kg 100
QTG150I Green 18.2kg 100
QT180IP Natural 18kg 100
QTB180IP Black 18kg 100
QT200I Natural 18.2kg 100
QTB200I Black 18.2kg 100
QT290I Natural 18.2kg 100
QTB290I Black 18.2kg 100
QT370I Natural 18.2kg 100
QTB370I Black 18.2kg 100
Part Number Colour Length Width Max. Dia. Min. Strength Pack Qty
QT120S Natural 22.2kg 100
QTB120S Black 22.2kg 100
QT160S Cable Tie 22.2kg 100
QTB160S Black 22.2kg 100
QT190S Cable Tie 22.2kg 100
QTB190S Black 22.2kg 100
QT200S Natural 22.2kg 100
QTR200S Red 22.2kg 100
QTBL200S Blue 22.2kg 100
QTY200S Yellow 22.2kg 100
QTG200S Green 22.2kg 100
QTB200S Black 22.2kg 100
QT250S Natural 22.2kg 100
QTB250S Black 22.2kg 100
QT300SP Natural 22kg 100
QTB300SP Black 22kg 100
QT300S Natural 22.2kg 100
QTB300S Black 22.2kg 100
QTR300S Red 22.2kg 100
QTBL300S Blue 22.2kg 100
QTY300S Yellow 22.2kg 100
QTG300S Green 22.2kg 100
QTS300S Silver 22.2kg 100
QT370SP Natural 22kg 100
QTB370SP Black 22kg 100
QT370S Natural 22.2kg 100
QTB370S Black 22.2kg 100
QTR370S Red 22.2kg 100
QTBL370S Blue 22.2kg 100
QTY370S Yellow 22.2kg 100
QTG370S Green 22.2kg 100
QTS370S Silver 22.2kg 100
QT430S Natural 22.2kg 100
QTB430S Black 22.2kg 100
Miniature Range
Cable Ties Intermediate Range
Standard Range
They are manufactured from tough durable Nylon 6/6 which has been tested to underwriters laboratory UL94V2. The material is zero halogenated and also has a low smoke and fume capability when compared with materials such as PVC, PP, PE, ABS, POM, ect.
excellent in halogen free and L.S.F. situations.
vibration, corrosion, etc., and in most cases exceed the
recommendations. The ties can be tensioned by hand or by the use of applied tensioning tools.
The colour shade of the standard ties is natural nylon or black, but other colours are available to special order. Black cable ties are recommended for general outdoor use and have a highly durable resistance to Ultra Violet Light.
Due to the variation in requirement for this type of application the cable ties can be manufactured from higher performance Nylon 6/6 with intensive weather
incorporated as indicated in Table ‘A’ and for any
>
>
>
1211 call: 01827 300600 fax: 01827 300620 email: [email protected] visit: www.unicrimp.com call: 01827 300600 fax: 01827 300620 email: [email protected] visit: www.unicrimp.com
Part Number Colour Length Width Max. Dia. Min. Strength Pack Qty
QT150LH Natural 54.5kg 100
QTB150LH Black 54.5kg 100
QT200LH Natural 54.5kg 100
QTB200LH Black 54.5kg 100
QT300LH Natural 54.5kg 100
QTB300LH Black 54.5kg 100
QT370LHP Natural 53kg 100
QTB370LHP Black 53kg 100
QT370LH Natural 54.5kg 100
QTB370LH Black 54.5kg 100
Part Number Colour Length Width Max. Dia. Min. Strength Pack Qty
QT200RE Natural 22.2kg 100
QTB200RE Black 22.2kg 100
QT300RE Natural 22.2kg 100
QTB300RE Black 22.2kg 100
QT370RE Natural 22.2kg 100
QTB370RE Black 22.2kg 100
Part Number Colour Length Width Max. Dia. Min. Strength Pack Qty
QT450H Natural 62kg 100
QTB450H Black 62kg 100
QT550H Natural 62kg 100
QTB550H Black 62kg 100
QT760H Natural 79.4kg 100
QTB760H Black 79.4kg 100
QT810H Natural 79.4kg 100
QTB810H Black 79.4kg 100
Part Number Colour Length Width Max. Dia. Min. Strength Pack Qty
Natural 113.5kg 100
Black 113.5kg 100
Natural 113.5kg 100
Black 113.5kg 100
Natural 113.5kg 100
Black 113.5kg 100
Natural 113.5kg 100
Black 113.5kg 100
Natural 113.5kg 100
Black 113.5kg 100
Natural 113.5kg 100
Black 113.5kg 100
Natural 113.5kg 100
Black 113.5kg 100
Natural 113.5kg 100
Black 113.5kg 100
Part Number A B C D E Max. Dia. Pack Qty
QSST150S 100
QSST200S 100
QSST300S 100
QSST360S 100
QSST520S 100
QSST300LH 100
QSST360LH 100
QSST520LH 50
QSST840LH 50
Light Heavy Range
Heavy Range
Extra Heavy Range
Stainless Steel Roller Ball Cable Ties
Extra Wide Ties Releasable Ties
or Marine Industries.
Releasable cable ties, designed to facilitate routine changes and repairs. Press tab for easy removal. Mountable head cable ties used to secure bundled harnesses to panels. They may also be pre mounted to existing installation before
Dimension A NominalDimension B + -0.4mmDimension C + -0.04mm
Dimension D NominalDimension E Nominal
Cable TiesCable Ties
E
A
B
C
>
• Made from 316 grade steel• Minimum loop tensile strength 4.6mm wide = 44kg • Minimum loop tensile strength 7.9mm wide = 110kg
1413 call: 01827 300600 fax: 01827 300620 email: [email protected] visit: www.unicrimp.com call: 01827 300600 fax: 01827 300620 email: [email protected] visit: www.unicrimp.com
Cable Tie AccessoriesCable Tie Accessories
Eyelets
Mounts
Cradles
2-Way Cable Tie Base
Wall Plug Mount
Sleeving
Heat Shrink Sleeving
Unicrimp accessories are designed to incorporate the majority of features applicable to the positioning of cable ties.
Self adhesive bases, cradles, eyelets and clamps are supplied and manufactured from A.B.S. or Nylon 6/6 material.
In case of self adhesive components the adhesive pads themselves have a base synthetic rubber foundation which
designed into the base as a preference if required.
• Designed for heavy duty harnessing applications• Self adhesive• Provides fast, strong mounting system for securing cables
Part Number Colour A B C F H Max. Dia. Pack Qty
QTE Natural 100
QTBE Black 100
Part Number Colour A B C D Pack Qty
QTM5 Natural 100
QTMB5 Black 100
QTM11 Natural 100
QTMB11 Black 100
QTM17 Natural 100
QTMB17 Black 100
Part Number Colour A B C F H Max. Dia. Pack Qty
QTC Natural 100
QTBC Black 100
Part Number Colour A B C F H Max. Dia. Pack Qty
QTB12 Natural 100
QTBB12 Black 100
QTB22 Natural 100
QTBB22 Black 100
Part Number Description A B Pack Qty
QMM9 100
Part Number Description Colour Pack Qty
QES2 Green/Yellow 1
QES3 Green/Yellow 1
QES4 Green/Yellow 1
QES5 Green/Yellow 1
QES2BL Blue 1
QES3BL Blue 1
QES4BL Blue 1
QES2BR Brown 1
QES3BR Brown 1
QES4BR Brown 1
Part Number Description Length Pack Qty
QHS6MPKIT 1
QHS12MPKIT 1
QHS19MPKIT 1
Accessories
B
C
D
All heat shrink packs contain brown, green/yellow, blue, black, and grey sleeving.
1615 call: 01827 300600 fax: 01827 300620 email: [email protected] visit: www.unicrimp.com call: 01827 300600 fax: 01827 300620 email: [email protected] visit: www.unicrimp.com
Cable Glands Cable Glands
BW Industrial Brass Glands
AE1W Industrial Brass Glands
Cable Gland Selection Chart
Part Number DescriptionGland Size
DStd. Entry Thread
(E)Min Thread
LengthCable Dia. Max
(A)Cable Dia. Max
(B)Armour Wire Dia.
(C)Pack Qty
QBW20 20 2
QBW20-LSFBW LSF Brass Gland
20 2
QBW20S 20s 2
QBW20S-LSF
BW LSF Brass Gland 20s 2
QBW25 25 2
QBW25-LSFBW LSF Brass Gland
25 2
QBW32 32 2
QBW32-LSFBW LSF Brass Gland
32 2
QBW40 40 1
QBW50 50 1
QBW50SBW Brass Gland 50S
50s 1
QBW63 63 1
QBW63SBW Brass Gland 63
63s 1
• Tested and approved to BS6121 pt1• Manufactured in cast brass to BS2874• Supplied in kit form with Shrouds, Earth Tags & Steel Locknuts• Standard 1.5mm Thread Pitch
Cable SizeSingle Core
2 Core
3 Core
4 Core
Number Of Cores
5 7 10 12 19 27 37 48
1.5 - 20S 20S 20S 20S 20 20 25 25 32 32 32
2.5 - 20S 20S 20S 20 20 25 25 25 32 40 40
4.0 - 20S 20S 20 20 20 25 25 32 40 40 50
6.0 - 20 20 20 20
10.0 - 20 20 25 25
16.0 - 25 25 25 25
25.0 - 25 32 32 32
35.0 - 32 32 32 40
50.0 20 25 32 32 50
70.0 20 32 32 40 50
95.0 25 32 40 50S
120 25 40 50S 50
150 32 40 50S 50
185 32 50S 50 63S
240 32 50 63S 63
300 40 63S 63 75S
400 40 63S 75S 75
The gland sizes recommended in this chart are for guidance only and are based on cables manufactured to BS 5467.Actual cable dimensions must be used for gland selection.
Due to cable diameter variances between manufacturers, we strongly advise the cable diameter is checked where possible, prior to purchasing the products.
Part Number DescriptionGland Size
DStd. Entry Thread
(E)Min Thread
LengthCable Dia. Max
(A)Cable Dia. Max
(B)Armour Wire Dia.
(C)Pack Qty
QAE1W20 20 2
QAE1W20S 20s 2
QAE1W25 25 2
QAE1W32 32 2
C
E
1817 call: 01827 300600 fax: 01827 300620 email: [email protected] visit: www.unicrimp.com call: 01827 300600 fax: 01827 300620 email: [email protected] visit: www.unicrimp.com
Cable Glands Cable Glands
Nylon Glands
Part Number Description Width Length Cable Diameter Pack Qty
QCGM12BLK 10
QCGM16BLK 10
QCGM20BLK 10
QCGM20LBLK 10
QCGM25BLK 10
QCGM32BLK 10
QCGM40BLK 5
QCGM50BLK 5
QCGM63BLK 5
QCGM12GRY 10
QCGM16GRY 10
QCGM20GRY 10
QCGM20LGRY 10
QCGM25GRY 10
QCGM32GRY 10
QCGM40GRY 5
QCGM50GRY 5
QCGM63GRY 5
10
10
10
10
10
10
QCGM16WHT 10
QCGM20WHT 10
QCGM20LWHT 10
QCGM25WHT 10
QCGM32WHT 10
QCGM40WHT 5
QCGM50WHT 5
QCGM63WHT 5
• Made from Polyamide 6• IP68 ingress protection• Includes locknut & washer
CW Industrial Brass Glands
Part Number DescriptionGland Size
D
Std. Entry Thread
(E)
Min Thread Length
Cable Dia. Max(A)
Cable Dia. Max(B)
Armour Wire Dia.(C)
Pack Qty
QCW20 20 2
QCW20-LSF 20 2
QCW20S 20s 2
QCW20S-LSF 20s 2
QCW25 25 2
QCW25-LSF 25 2
QCW32 32 2
QCW32-LSF 32 2
QCW40 40 1
QCW50 50 1
QCW50S 50s 1
QCW63 63 1
QCW63S 63s 1
QCW75 75 1
QCW75S 75s 1
• Tested and approved to BS6121 pt1• Manufactured in cast brass to BS2874• Supplied in kit form with Shrouds, Earth Tags & Steel Locknuts• Standard 1.5mm Thread Pitch
C
E
2019 call: 01827 300600 fax: 01827 300620 email: [email protected] visit: www.unicrimp.com call: 01827 300600 fax: 01827 300620 email: [email protected] visit: www.unicrimp.com
Insulating TapesAccessories
Grommets - Quick Fit Type
Grommets - Standard Type
Earth Clamps
Part Number Description Width Pack Qty
QGROMQ20OPEN 100
QGROMQ25OPEN 100
100
100
Part Number Description Pack Qty
QP2242Y 24A 450V Yellow Transparent 2 Port Push In Wire Connectors 100
QP3242O 24A 450V Orange Transparent 3 Port Push In Wire Connectors 100
QP4242T 24A 450V Transparent 4 Port Push In Wire Connectors 75
QP5242B 24A 450V Blue Transparent 5 Port Push In Wire Connectors 50
QP6242P 24A 450V Purple Transparent 6 Port Push In Wire Connectors 50
QP8242B 24A 450V Black Transparent 8 Port Push In Wire Connectors 40
Part Number Description Width Pack Qty
QGROM20OPEN 100
100
QGROM25OPEN 50
50
Part Number Description Pack Qty
QEC14 20
QEC15 20
Terminal Blocks
Push in Connectors
Part Number Description Pack Qty
QTB5 10
QTB15 10
QTB30 10
PVC Tapes
Specialist Tapes
General purpose non-migratory plasticised insulation tape supplied in lengths of 20m and 33m with all colours as detailed.
Tested for: Thickness, Tensile Elongation, Adhesion, Adhesion to Backing, Flagging, Corrosive Sulphur, Flame Propagation (CAT 2), Plastic to 31/90 (PVCP), Working Temperature up to 80°C.
Part Number Colour Length Width Pack Qty
1920B Black 10
1920BL Blue 10
1920BR Brown 10
1920GR Green 10
1920GY Grey 10
1920R Red 10
1920W White 10
1920Y Yellow 10
1920YG Yellow/Green 10
1933B Black 10
1933BL Blue 10
1933BR Brown 10
1933GR Green 10
1933GY Grey 10
1933R Red 10
1933W White 10
1933Y Yellow 10
1933YG Yellow/Green 10
Part Number Description Length Pack Qty
1
1
• Tested and approved to BS951
• PE material• Brass insert• Captive screw
• Manufactured to comply with BS EN 60454-3
2221 call: 01827 300600 fax: 01827 300620 email: [email protected] visit: www.unicrimp.com call: 01827 300600 fax: 01827 300620 email: [email protected] visit: www.unicrimp.com
Cable CleatsCable Clips
Cable Clips
Part Number Description Colour Width Pack Qty
QRC1 Clear 100
QRC2 Clear 100
QRC3 White 100
QRC4 Black 100
QRC5 Clear 100
QRC6 White 100
QRC7 Black 100
QRC8 Brown 100
QRC9 Red 100
QRC10 White 100
QRC11 Black 100
QRC12 White 100
QRC13 Black 50
QRC14 White 50
QRC15 Black 50
QRC16 White 50
QRC17 Black 50
QRC18 White 50
QFC1 Clear 100
QFC2 Clear 100
QFC3 Clear 100
QFC4 Grey 100
QFC5 Grey 100
QFC6 Grey 100
QFC7 Grey 100
QFWC1 White 100
QFWC4 White 100
QFWC5 White 100
Grey 100
Grey 100
QJ12B Black 100
QJ12W White 100
QFGFC25 N/A 10
Cable Cleats
Part Number Description Width Pack Qty
QC3 100
QC4 100
QC5 100
QC6 100
QC7 100
QC8 100
QC9 100
QC10 100
QC12 50
QC14 50
QC16 50
QC18 50
QC20 20
Part Number Description Pack Qty
QTAG4 Contractor Lock Off Kit 1
QTAG5 Basic Lock Off Kit 1
• Self grip design• Chemical inertness• Stress crack resistance• Thick steel nails prevents snapping• Long nail for good pull out value
• Manufactured in high strength polypropylene not polythene• High impact resistance• Unaffected by corrosive environments• Higher mechanical strength than polythene• High level of resistance to ultra violet light• Stability down to -35°C and up to 105°C constant
Lock-Offs Kits QTAG5 QTAG4
Fire-Safe Cable Clips
2423 call: 01827 300600 fax: 01827 300620 email: [email protected] visit: www.unicrimp.com call: 01827 300600 fax: 01827 300620 email: [email protected] visit: www.unicrimp.com
FixingsFixings
Frame Fixings
Hammer Fixings
Anchor Bolts
Wedge Anchor
Projecting Anchor Bolts
Tradesman TubsPart Number Description Pack Qty
QTT2 1
QTT3 1
QTT4 1
QTT5 1
Wall PlugsFor installing garage doors, gate posts, steelwork and heavy equipment. Suitable for brickwork, masonry or concrete.
For installing radiator brackets, ducting, trunking, partitions & overhead objects. Suitable for use with solid brickwork, masonry or concrete.
Plasterboard Plugs – For installing ducting, light switches and light weight objects. Suitable for plasterboard, cavity walls and ceilings.
Part Number Description Length Width Drill Size Drill Depth With Frame Max Fixture Thickness Pack Qty
CC-04111 16
CC-04112 16
CC-04113 16
Part Number Description Length Width Drill Size Drill Depth With Fixture Max Fixture Thickness Pack Qty
CC-04117 16
CC-04118 16
CC-04119 16
CC-04120 16
CC-04121 16
CC-04122 16
Part Number Description Drill Size Screw Size Max Fixture Thickness Pack Qty
CC-04169 Red Plastic Wall Plugs Pack 100
CC-04171 Yellow Plastic Wall Plugs Pack 100
CC-04173 Brown Plastic Wall Plugs Pack 100
CC-04187 Plasterboard Plugs Pack 100
CC-70010 1
CC-70011 1
Part Number Description Length Width Drill Size Drill Depth With Fixture Max Fixture Thickness Pack Qty
CC-04129 M6 4
CC-04132 M8 4
CC-04133 M8 4
CC-04134 M8 4
CC-04135 M10 4
CC-04139 M10 4
CC-04136 M10 4
CC-04137 M10 4
CC-04138 M10 4
Part Number Description Length Width Drill Size Drill Depth with Frame Outer Diameter Pack Qty
QWA6-25 M6 100
QWA8-30 M8 100
QWA10-40 M10 50
Part Number Description Length Width Drill Size Minimum Drill Depth Max Fixture Thickness Pack Qty
CC-04141 M6 4
CC-04145 M8 4
CC-04146 M10 4
CC-04147 M10 4
CC-04148 M10 4
Hollow Wall Anchors
Small & Medium Anchor - For installing shelving, hooks and bathroom accessories. Suitable for plasterboard, cavity walls and ceilings. Large Anchor – For installing kitchen cabinets, radiator, brackets and bathroom accessories. Suitable for plasterboard, cavity walls and ceilings.
Part Number Description Length Width Drill Size Max Fixture Thickness Pack Qty
CC-04200 M4 10
CC-04202 M5 10
CC-04204 Large M6 Hollow Wall Anchors M6 10
2625 call: 01827 300600 fax: 01827 300620 email: [email protected] visit: www.unicrimp.com call: 01827 300600 fax: 01827 300620 email: [email protected] visit: www.unicrimp.com
FixingsFixings
Self Drive Plug & Screws
Self Drive Screws
Spring Toggles
Metal Self Drive - For shelving, bathroom sanitary ware, hooks and brackets. Suitable for plasterboard, cavity walls and ceilings.
Nylon Self Drive - For light switches, electrical sockets, hooks and brackets. Suitable for plasterboard, cavity walls and ceilings.
Part Number Description Length Width Max Fixture Thickness Pack Qty
CC-04195 12
CC-04197 12
100
Part Number Description Length Width Max Fixture Thickness Pack Qty
QWHC42-13 100
QWHC48-16 100
QWHC55-20 100
Part Number Description Length Width Drill Size Max Fixture Thickness Pack Qty
CC-04205 M5 5
CC-04208 M5 10
Toggle Fixings
For light switches, electrical sockets, shelves, hooks and brackets. Suitable for plasterboard, cavity walls or ceilings.
Part Number Description Length Width Drill Size Plasterboard Thickness Max Fixture Thickness Pack Qty
CC-04189 M5 5
CC-04191 M5 5
Eyebolts
Hook Bolt
For installing cables, ladder restraints and chains or heavy objects from ceilings or walls. Suitable for solid brickwork, masonry or concrete.
For installing cables, ladder restraints and chains or heavy objects from ceilings or walls. Suitable for solid brickwork, masonry or concrete.
Part Number Description Length Width Drill Size Minimum Drill Depth Pack Qty
CC-04149 EyeBolts M6 M6 2
CC-04150 EyeBolts M8 M8 2
Part Number Description Length Width Pack Qty
QRB6-12 M6 100
QRB6-16 M6 100
QRB6-20 M6 100
QRB6-25 M6 100
QRB6-30 M6 100
QRB6-40 M6 100
QRB6-50 M6 100
Part Number Description Length Width Drill Size Minimum Drill Depth Pack Qty
CC-04152 Hook Bolts M8 M8 2
Panhead ScrewsPart Number Description Length Width Pack Qty
100
100
100
100
100
100
100
100
100
100
100
All Panhead Machine screws are Zinc plated.
Brass Panhead ScrewsPart Number Description Length Width Pack Qty
QMS4-12B M4 100
QMS4-16B M4 100
QMS4-20B M4 100
QMS4-25B M4 100
2827 call: 01827 300600 fax: 01827 300620 email: [email protected] visit: www.unicrimp.com call: 01827 300600 fax: 01827 300620 email: [email protected] visit: www.unicrimp.com
Extension Stud
Capping Nail
Counter Sunk Machine Screws
Twin Thread Screw
Part Number Description Length Width Pack Qty
M3.5 100
Part Number Description Nail Washer Pack Qty
QCAPN 100
Part Number Description Length Width Pack Qty
100
100
100
100
100
Part Number Description Length Width Pack Qty
QWS8-075 200
QWS8-1 200
QWS8-125 200
QWS8-15 200
QWS8-175 200
QWS8-20 200
QWS8-225 200
QWS8-25 200
QWS8-30 100
QWS10-10 200
QWS10-125 200
QWS10-15 200
QWS10-175 200
QWS10-20 200
QWS10-25 100
QWS10-3 100
All Raised Countersunk Machine screws are Zinc plated.
Nuts / Washers
Mudguard Washers
Regs Books
Part Number Description Width Pack Qty
QBFNM4 Brass M4 Full Nuts 100
QBWM4 Brass M4 Washers 100
QHN6 100
QHN8 100
QHN10 100
QF6BZP Flat M6 BZP Washers 10
QF8BZP Flat M8 BZP Washers 10
QF10BZP Flat M10 BZP Washers 10
Part Number Description Width Pack Qty
QMG6-25 100
QMG8-25 100
QMG10-25 100
Part Number Description Pack Qty
REG17/3 1
OSG/3 1
FixingsFixings
Hexagon Head Screw SetPart Number Description Length Width Pack Qty
QHH6-25BZP M6 100
QHH8-25BZP M8 100
QHH10-25BZP M10 100
3029 call: 01827 300600 fax: 01827 300620 email: [email protected] visit: www.unicrimp.com call: 01827 300600 fax: 01827 300620 email: [email protected] visit: www.unicrimp.com
Adhesives Adhesives
SCONTHMA300W
Unicrimp - Silicone Adhesive Contractors GP - White 300ml
SCONTHMA300C
Unicrimp - Silicone Adhesives Contractors GP - Clear 300ml
EG310
Unicrimp - Solvent Based Bonding Adhesive - 300ml
Unicrimp - SX Mighty Strength Grip & Grab Adhesive - 290ml
Unicrimp -Acrylic Decorators Caulk - White (C3) 300ml
Unicrimp - Hand Held Expanding Foam Can - 500ml
GUNSG400
Unicrimp - Professional Caulking Gun
Unicrimp -Instant Plaster Filler - Light Weight C3 Tube 310ml
ZPBF1L
Unicrimp - ZWALUW Instant Plaster Filler - White 1 litre Tub
3231 call: 01827 300600 fax: 01827 300620 email: [email protected] visit: www.unicrimp.com call: 01827 300600 fax: 01827 300620 email: [email protected] visit: www.unicrimp.com
Tools
Ratchets
Torque Driver
QHCR1516
Four jaw ratchet tool with controlled calibration suitable for crimping 1.5 to 16mm² copper tube terminals.
QHCRF15
Triple jaw ratchet tool with controlled calibration suitable for crimping non insulated male/female disconnect terminals with
QTOURQ
Torque Driver Sets - 1.7Nm & 2.3Nm Flat Head, Phillips & Screwdriver Handle
Tools
Crimping Tools
Cable Stripper
QHC95
Heavy duty indent crimping tool for tube and sheet terminals this tool will crimp 10 to 95mm² with non ratchet screw adjustment.
QHC15
General application plier type crimping tool for insulated and uninsulated terminals with a range of 0.25 to 6mm² non ratchet.
QSTRIP
A versatile tool which will strip 0.25 to 6mm² PVC sheathed cable. It also has the facility for cutting and indent crimping cables up to 6mm².
QCC22
Large aperture for cutting copper cable up to 10mm diameter,
22mm² cable.
QCC38
Large aperture for cutting copper cable up to 10mm diameter,
38mm² cable.
Cable Cutter
3433 call: 01827 300600 fax: 01827 300620 email: [email protected] visit: www.unicrimp.com call: 01827 300600 fax: 01827 300620 email: [email protected] visit: www.unicrimp.com
Stock We understand the importance of stock availability and are committed to having 100% stock availability at our central distribution centre at any given time.
Warehouse / ServiceOur centrally located 150,000sq ft Warehouse and Distribution Centre allow us to deliver our products on time every time
Product Development Unicrimp® products are designed with our customer / the installer very much in mind. Our purpose built facilities and dedicated
to design and develop these products based on customer feedback and market research, ensuring we are producing a relevant, reliable and quality range of products.
“At Unicrimp® the whole
business is focused on
the customer. We aim to
provide market leading
levels of service and
customer support.
Our forward thinking
and investment for the
future together with our
dedicated employees
enable a dynamic working
environment that provides
the platform
for continued growth.”
Ian Hunter
Sales & Commercial Director
Customer Support
In-House Studio All marketing support including product literature and point of sale material is designed by our dedicated in-house design studio. This facility enables us to offer bespoke marketing support to our customers.
Distributor Network Unicrimp distributes exclusively through the electrical wholesale trade.These include Independent Wholesalers, National Wholesale Groups and Buying Consortiums making the products readily available throughout the UK.
customer service requirements. The professionalism skills and knowledge of our internal sales team enables us to provide the high standard of service that we know our customers expect. Our on-line ordering facility is also managed
Customer Support
3635 call: 01827 300600 fax: 01827 300620 email: [email protected] visit: www.unicrimp.com call: 01827 300600 fax: 01827 300620 email: [email protected] visit: www.unicrimp.com
Online
35 call: 01827 300600 fax: 018 20 email: [email protected] visit: www.unicrimp.com
The refreshed new site provides customers with access to detailed product information for the company’s extensive Q-Crimp® branded range of cable management consumables, which includes cable ties, crimp terminals, PVC tape, copper tube terminals, cable clips and nylon cable glands.
Stockists can also take advantage of a comprehensive product image library, plus a range of literature covering every product category - all available to download at the click of a button. Visitors can keep informed of the latest new products and company developments via regular updates on the news section.
The full product range can be found online
and access to the latest catalogue.
® rangeRegular news, product & video updates
With regular updates on new products and details of developments within our business,
the site is a great source of information.
Website
Online
call: 01827 300600 fax: 01827 300620 email: sales@un 36om visit: www.unicrimp.com
A brand new feature of the revamped site is the Marketing Hub area which provides Unicrimp® stockists with a range of tools to enhance their own marketing facilities. The Marketing Hub gives customers the opportunity to enhance their own Marketing facilities with very little effort or cost.
A number of templates featuring some of the most popular products is available to download and these can be customised with the stockists own details to optimise sales opportunities.
download, with editable sections so you can add your companies details.
Download all of our product images, all saved by product code and at a perfect
resolution for your website.
Marketing Hub
3837
Index Index
call: 01827 300600 fax: 01827 300620 email: [email protected] visit: www.unicrimp.com call: 01827 300600 fax: 01827 300620 email: [email protected] visit: www.unicrimp.com
Symbols1920B 201920BL 201920BR 201920GR 201920GY 201920R 201920W 201920Y 201920YG 201933B 201933BL 201933BR 201933GR 201933GY 201933R 201933W 201933Y 201933YG 20
CCC-04111 23CC-04112 23CC-04113 23CC-04117 23CC-04118 23CC-04119 23CC-04120 23CC-04121 23CC-04122 23CC-04129 24CC-04132 24CC-04133 24CC-04134 24CC-04135 24CC-04136 24CC-04137 24CC-04138 24CC-04139 24CC-04141 24CC-04145 24CC-04146 24CC-04147 24CC-04148 24CC-04149 25CC-04150 25CC-04152 25CC-04171 23CC-04173 23CC-04187 23CC-04189 25CC-04191 25CC-04195 26CC-04197 26CC-04200 24CC-04202 24CC-04204 24CC-04205 25CC-04208 25CC-70010 23CC-70011 23
EEG310 29
GGUNSG400 30
OOSG/3 28
Q
QAE1W20 15QAE1W20S 15QAE1W25 15QAE1W32 15QB1-5 8QB2-5 8QB4-6 8QB10 8QB16 8QB25 8QB35 8QB50 8QB70 8QB95 8QB120 8QB150 8QB185 8QB240 8QBAB4F 5QBAB4M 5QBAB5F 5QBAB5M 5QBB 5QBBL9 5QBBL18 5QBF3 5QBF3N 5QBF4N 5QBF5 5QBF6 5QBFNM4 28QBFPO48F5 5QBFPO48F8 5QBFPO63F 5QBP12 5QBPO48F5 5QBPO48F8 5QBPO48M5 5QBPO48M8 5QBPO63F 5QBPO63M 5QBPO85F 5QBPOA63 5QBR3 5QBR4 5QBR5 5QBR6 5QBR8 5QBR10 5QBR12 5QBR37 5QBW20 16QBW20-LSF 16QBW20S 16QBW20SLSF 16QBW25 16QBW25-LSF 16QBW32 16QBW32-LSF 16QBW40 16QBW50 16QBW50S 16QBW63 16QBW63S 16QBWM4 28QC3 22QC4 22QC5 22QC6 22QC7 22QC8 22QC9 22QC10 22QC12 22QC14 22QC16 22QC18 22
QC20 22QCAPN 27QCC22 33QCC38 33QCGM12BLK 18QCGM12GRY 18
18QCGM16BLK 18QCGM16GRY 18
18QCGM16WHT 18QCGM20BLK 18QCGM20GRY 18QCGM20LBLK 18QCGM20LGRY 18
18QCGM20LWHT 18
18QCGM20WHT 18QCGM25BLK 18QCGM25GRY 18
18QCGM25WHT 18QCGM32BLK 18QCGM32GRY 18
18QCGM32WHT 18QCGM40BLK 18QCGM40GRY 18QCGM40WHT 18QCGM50BLK 18QCGM50GRY 18QCGM50WHT 18QCGM63BLK 18QCGM63GRY 18QCGM63WHT 18QCT04-6 7QCT04-8 7QCT04-10 7QCT06-4 7QCT06-5 7QCT06-6 7QCT06-8 7QCT06-10 7QCT10-5 7QCT10-6 7QCT10-8 7QCT10-10 7QCT10-12 7QCT015-3 7QCT015-4 7QCT015-5 7QCT16-6 7QCT16-8 7QCT16-10 7QCT16-12 7QCT025-3 7QCT025-4 7QCT25-5 7QCT25-6 7QCT25-8 7QCT25-10 7QCT25-12 7QCT35-6 7QCT35-8 7QCT35-10 7QCT35-12 7QCT50-6 7QCT50-8 7QCT50-10 7QCT50-12 7QCT70-6 8QCT70-8 8QCT70-10 8QCT70-12 8QCT70-14 8QCT95-8 8
QCT95-10 8QCT95-12 8QCT95-14 8QCT95-16 8QCT120-8 8QCT120-10 8QCT120-12 8QCT120-14 8QCT120-16 8QCT150-8 8QCT150-10 8QCT150-12 8QCT150-14 8QCT150-16 8QCT150-20 8QCT185-10 8QCT185-12 8QCT185-14 8QCT185-16 8QCT185-20 8QCT240-10 8QCT240-12 8QCT240-14 8QCT240-16 8
26QCW20 17QCW20-LSF 17QCW20S 17QCW20S-LSF 17QCW25 17QCW25-LSF 17QCW32 17QCW32-LSF 17QCW40 17QCW50 17QCW50S 17QCW63 17QCW63S 17QCW75 17QCW75S 17
212120
QEC14 19QEC15 19QES2 14QES2BL 14QES2BR 14QES3 14QES3BL 14QES3BR 14QES4 14QES4BL 14QES4BR 14QES5 14
27QF6BZP 28QF8BZP 28QF10BZP 28QFC1 21QFC2 21QFC3 21QFC4 21QFC5 21QFC6 21QFC7 21QFGFC25 21QFWC1 21QFWC4 21QFWC5 21
19QGROM20OPEN 19
19QGROM25OPEN 19
19QGROMQ20OPEN 19
19
QGROMQ25OPEN 19QHC15 33QHC95 33QHH6-25BZP 28QHH8-25BZP 28QHH10-25BZP 28QHN6 28QHN8 28QHN10 28QHS6MPKIT 14QHS12MPKIT 14QHS19MPKIT 14QHSB1 4QHSB2 5QHSB5 6QJ12B 21QJ12W 21QMG6-25 28QMG8-25 28QMG10-25 28QMM9 14QMS4-12B 26QMS4-16B 26QMS4-20B 26QMS4-25B 26
2626262626262626262626
QP2242Y 19QP3242O 19QP4242T 19QP5242B 19QP6242P 19QP8242B 19QRAB4F 4QRAB4M 4QRB 3QRB6-12 25QRB6-16 25QRB6-20 25QRB6-25 25QRB6-30 25QRB6-40 25QRB6-50 25QRBL10 4QRBL14 4QRBL18 4QRC1 21QRC2 21QRC3 21QRC4 21QRC5 21QRC6 21QRC7 21QRC8 21QRC9 21QRC10 21QRC11 21QRC12 21QRC13 21QRC14 21QRC15 21QRC16 21QRC17 21QRC18 21
27272727
27QRF3 4QRF3N 4QRF4N 4QRF5 4QRF6 4QRFPO28F5 4QRFPO28F8 4QRFPO48F5 4QRFPO48F8 4QRFPO63F 4QRP12 3QRPO28F5 3QRPO28F8 3QRPO28M5 3QRPO28M8 3QRPO48F5 3QRPO48F8 3QRPO48M5 3QRPO48M8 3QRPO63F 3QRPO63M 3QRPOA63 3QRR3 3QRR4 3QRR5 3QRR6 3QRR8 3QRR10 3QRR12 3QRR37 3QSST150S 12QSST200S 12QSST300LH 12QSST300S 12QSST360LH 12QSST360S 12QSST520LH 12QSST520S 12QSST840LH 12QSTRIP 33QT80M 9QT100M 9QT120M 9QT120S 10QT140MP 9QT150I 10QT150LH 11QT160S 10QT165M 9QT180IP 10QT190S 10QT200I 10QT200LH 11QT200M 9QT200RE 12QT200S 10
11QT250S 10
11QT290I 10QT300LH 11QT300RE 12QT300S 10QT300SP 10QT370I 10QT370LH 11QT370LHP 11QT370RE 12QT370S 10QT370SP 10
11QT430S 10QT450H 11
11QT550H 11
11
11QT760H 11QT810H 11
1111
QTAG4 22QTAG5 22QTB5 19QTB12 13QTB15 19QTB22 13QTB30 19QTB80M 9QTB100M 9QTB120M 9QTB120S 10QTB140MP 10QTB150I 10QTB150LH 11QTB160S 10QTB165M 9QTB180IP 10QTB190S 10QTB200I 10QTB200LH 11QTB200M 9QTB200RE 12QTB200S 10
11QTB250S 10
11QTB290I 10QTB300LH 11QTB300RE 12QTB300S 10QTB300SP 10QTB370I 10QTB370LH 11QTB370LHP 11QTB370RE 12QTB370S 10QTB370SP 10
11QTB430S 10QTB450H 11
11QTB550H 11
1111
QTB760H 11QTB810H 11
1111
QTBB12 13QTBB22 13QTBC 13QTBE 13QTBL100M 9QTBL150I 10QTBL200S 10QTBL300S 10QTBL370S 10QTC 13QTE 13QTG100M 9QTG150I 10QTG200S 10QTG300S 10QTG370S 10QTM5 13QTM11 13QTM17 13QTMB5 13QTMB11 13QTMB17 13QTR100M 9QTR150I 10
QTR200S 10QTR300S 10QTR370S 10QTS300S 10QTS370S 10QTT2 23QTT3 23QTT4 23QTT5 23QTY100M 9QTY150I 10QTY200S 10QTY300S 10QTY370S 10
20QWA6-25 24QWA8-30 24QWA10-40 24QWHC42-13 26QWHC48-16 26QWHC55-20 26QWS8-1 27QWS8-15 27QWS8-20 27QWS8-25 27QWS8-30 27QWS8-075 27QWS8-125 27QWS8-175 27QWS8-225 27QWS10-3 27QWS10-10 27QWS10-15 27QWS10-20 27QWS10-25 27QWS10-125 27QWS10-175 27QYAB5F 6QYAB5M 6QYB 6QYBL10 6QYBL18 6QYF3N 6QYF4N 6QYF5 6QYF6 6QYFPO63F 6QYFPO95F 6QYP14 6QYPO63F 6QYPO63M 6QYPO95F 6QYPOA63 6QYR4 6QYR5 6QYR6 6QYR8 6QYR10 6QYR12 6
RREG17/3 28
S30
SCONTHMA300C 29SCONTHMA300W 29
30292930
ZZPBF1L 30
UNI1000/4
Unit 3 Scolmore Park, Landsberg,
Tamworth, Staffordshire B79 7XB, United Kingdom
T: +44 (0)1827 300600 F: +44 (0)1827 300620 E: [email protected]
Southern Ireland
18 Corrig Road,Sandyford Industrial Estate,Dublin,D18 WV79, Ireland
T: +353 (1) 2811 122F: +353 (1) 2811 224E: [email protected]
www.clicklitehouse.ie