electrical and electronic equipment act rohs-2 2011/65/eu ... · electrical and electronic...
TRANSCRIPT
Electrical and Electronic Equipment ActRoHS-2 2011/65/EU and WEEE 2012/19/EU The German Electrical- and Electronic Equipment Act (ElektroG) of March 16, 2005 implements
the European Guidelines RoHS and WEEE in German law and sets new requirements on harmful
substances in electrical and electronic products.
Re-use, recycle & prevent waste
Contact Us :
Head Offi ce
TÜV Rheinland (India) Pvt. Ltd.82/A West Wing, 3rd Main Road, Electronic City Phase I, Bangalore-560 100, India.Tel # : +91-(0)80 3989 9888/ 3055 4319Fax # : +91-(0)80 30554342Email: [email protected]: www.ind.tuv.com
Our offi ces
Chennai MumbaiCochin NoidaCoimbatore PanchkulaGurgaon PuneHyderabad RanipetKarur TirupurKolhapur TrichyKolkata TuticorinMadurai VadodaraMohali Visakhapatnam
Material Testing Laboratory
Plot No:17 B, Electronic City, Phase II, Bangalore-560 100,India.Tel # : +91-(0)80 3923 4301Fax # : +91-(0)80 3055 4342Email: [email protected]
Contact Us :
Head Offi ce
TÜV Rheinland (India) Pvt. Ltd.82/A West Wing, 3rd Main Road, Electronic City Phase I, Bangalore-560 100, India.Tel # : +91-(0)80 3989 9888/ 3055 4319Fax # : +91-(0)80 30554342Email: [email protected]: www.ind.tuv.com
Our offi ces
Chennai MumbaiCochin NoidaCoimbatore PanchkulaGurgaon PuneHyderabad RanipetKarur TirupurKolhapur TrichyKolkata TuticorinMadurai VadodaraMohali Visakhapatnam
Material Testing Laboratory
Plot No:17 B, Electronic City, Phase II, Bangalore-560 100,India.Tel # : +91-(0)80 3923 4301Fax # : +91-(0)80 3055 4342Email: [email protected]
Contact Us :
Head Offi ce
TÜV Rheinland (India) Pvt. Ltd.82/A West Wing, 3rd Main Road, Electronic City Phase I, Bangalore-560 100, India.Tel # : +91-(0)80 3989 9888/ 3055 4319Fax # : +91-(0)80 30554342Email: [email protected]: www.ind.tuv.com
Our offi ces
Chennai MumbaiCochin NoidaCoimbatore PanchkulaGurgaon PuneHyderabad RanipetKarur TirupurKolhapur TrichyKolkata TuticorinMadurai VadodaraMohali Visakhapatnam
Material Testing Laboratory
Plot No:17 B, Electronic City, Phase II, Bangalore-560 100,India.Tel # : +91-(0)80 3923 4301Fax # : +91-(0)80 3055 4342Email: [email protected]
Our Service Offering � RoHS testing and certification service for components and raw
materials � RoHS testing and certification service for appliances � Factory and supplier assessment and certification (based on ISO
14000 and QCO 8000) � Support in establishing material/ composition declaration for
components and parts � Raw material or component supplier 3rd party assessment � Pre-compliance testing of components and materials � Support in Design for Recycling (DfR) � Support in Design for Dismantling (DfM) � Support in Design for Environment (DfE) � In-house training and consulting on RoHS Directive
New Requirements for Electrical and Electronic Products
• Large household appliances• Small household appliances• IT and telecommunications equipment• Consumer equipment• Lighting equipment• Electrical and elcctronic tools• Toys leisure and sports equipment• Medical devices• Monitoring and control instruments including industrial
monitoring and control instruments• Automatic dispensers• Other EEE not covered by any of the categories above
Hamonize the life cycle of your product from initial design to recycling
Excemption
The new act already contains several excemption rules for individual product groups and certain uses of materials and components. Furthermore additional excemption rules are being prepared on the EU-level. In concise expert reports we clarify for you, whether excemption rules apply to your product from the technical point of view.
Duties of the manafacturers and commerce
The manafacturer is responsible that the limit values are kept. If the manafacturer is not located in the EU-area, the producer’s responsibility gets automatically transferred to the importer.
®T
ÜV,
TU
EV
an
d T
UV
are
reg
iste
red
tra
dem
arks
. Uti
lisat
ion
an
d a
pp
licat
ion
req
uir
ed p
rio
r ap
pro
val.
IND
0054
- P
330
Test Experience
Experience in testing shows, that the products currently produced do not necessarily meet these requirements without problems.
Testing
Our accreduted laboratory offers you reliable and inexpensive routine testing for these paramaters. The combination of quick screening viaX-ray-fluorescence and reference methods for the exact determination of the concentration allows for reliable testing of your products at an excellent price
Your BenefitsWith our test reports and certificates you prove the conformity of your products with regards to the new requirements and document the fulfillment of due diligence.
Create new market opportunities and gain the confidence and trust of your customers.
IECQ HSPM QC 080000- Electrical and electronics components and products hazardous substance process management systems standard
It is developed by the International Electrotechnical commission (IEC) from the quality assessment system for Electronic components (IECQ).
QC 080000 applies process management to integrate and manage hazardous substance so as to minimize or eliminate production of hazardous substances satisfying RoHS, WEEE and other customer
requirements
Advantages
Planning for environment-friendly products, compliance with environmental regulation
Reducing rework/ later correction
Product compliance through a consistent process
Demonstrating enterprise responsibility to protect the environment
From July 1st, 2006 on, new electrical and electronic products may not exceed the following limit values for the substances listed below:
� Lead 0.1 mass% � Cadmium 0.01 mass% � Mercury 0.1 mass% � Chromiun-VI 0.1 mass% � PBB1 0.1 mass% � PBDE3 Pt1 0.1 mass%
1) = brominated flame retardantsImportant: The limit values apply to each individual homogenous material.