electrical and photovoltaic installations tester: mi 3108 mi 3109...a set of testers and accessories...
TRANSCRIPT
Electrical Installation Safety Electrical Installation Safety
1. 6 1. 7Accessories: page 1.60 Accessories: page 1.60
PHOTOVOLTAIC AND ELECTRICAL INSTALLATIONS TESTER PHOTOVOLTAIC AND ELECTRICAL INSTALLATIONS TESTER
Electrical and Photovoltaic Installations Tester:MI 3108 EurotestPV
Part No.MI 3108 MI 3109
EurotestPV EurotestPV Lite
Features Description
ELECTRICAL INSTALLATION SAFETY
Insulation resistance up to 1000 V
Continuity 200 mA
Line / Loop Impedance –
RCD A, AC, B –
Earth resistance –
Rotary field –
PV GENERATOR MEASUREMENTS
Isc, Uoc 1000 V / 15 A 1000 V / 15 A
Automatic test sequence –
I-V curve
Umpp, Impp, Pmax
extrapolation to STC *
Rs (calculated in PC SW)
ENVIRONMENT MEASUREMENTS
Irradiance *
Module temperature *
PV SYSTEM POWER MEASURENMENTS
DC side measurements U, I, P
AC side measurements (single phase) U, I, P
PV and inverter energy conversion efficiency
EXTENDED POWER FUNCTIONALITY
P, Q, S, THDU, PF/cos ϕ –
AC/DC current –
Scope function –
Energy –
Harmonics (up to 11th) –
GENERAL DATA
Memory sizeI-V curve: ca. 500 meas. Other: ca 1800 meas.
Supply 6 x AA
Built-in battery charger
Display 128 x 64 BW LCD
Overvoltage categoryCAT II / 1000 V DC
CAT III / 600 VCAT IV / 300 V
PC connectivity
PC Software EuroLink PRO EuroLink PRO
Weight (kg) 1.3 1.3
Dimensions (mm) 230 x 103 x 115 230 x 103 x 115
* Environment data can be entered manually or measured with optional accessory
Selection Guide for Photovoltaic and Electrical installations Testers
1 2 3
DC SWITCH
1 0
AC SWITCH
1 0
L1
L2
L3
N
P
IN I3 C B A I1
L1 L3C
N A
I2
L2 B
A 1436
BluetoothTMoror
A 1436
Bluetooth
TM
TM
TM
RS232
PHOTOVOLTAIC AND ELECTRICAL INSTALLATION TESTERSMI 3108 EurotestPV and MI 3109 EurotestPV Lite
PHOTOVOLTAIC AND ELECTRICAL INSTALLATION TESTERSMI 3108 EurotestPV and MI 3109 EurotestPV Lite
PHOTOVOLTAIC AND ELECTRICAL INSTALLATION TESTERSMI 3108 EurotestPV and MI 3109 EurotestPV Lite
Electrical installation safety measurements:• Voltage and frequency,• Continuity tests,• Insulation resistance tests,• RCD testing,• Fault loop / RCD trip-lock impedance
measurements,• Line impedance / Voltage drop,• Phase sequence,• Earthing resistance tests,• Current measurements,• Power, harmonics and energy meas-
urements.
For complete electrical installation testing according to EN 61557 standards.
Recording of environment parameters:• Irradiance• Panel temperature• Ambient temperature.
Without accurate, real time values of environment parameters calculations of SCT values are not possible.
DC and AC Power measurements on PV generator and inverter:• Voltages, currents and power• Efficiency calculation• Scope function
PC SW EuroLink PRO Plus• Download, analysis and reporting
Module characteristics:• I-U Curve• Power Curve• Calculation of STC values• Determination of Pmpp
For first inspection, for periodic tests, for performance evaluation and troubleshooting of PV generators.
A set of testers and accessories for testing, evaluation and troubleshooting of photovoltaic installations.
Measurements according to EN 62446:• Insulation• Continuity• Uoc• Isc
Measurements according to EN 62446:• Insulation resistance tests,• Continuity tests,• Uoc and Isc measurements.
This are the minimum requirements for system documentation, commissioning tests, and inspection of PV installations.
New Commanders:With enhanced functionality to make testing even more effective.
For power and efficiency measurements on single or 3-phase inverters: 3-phase measurements are possible in combination with Metrel’s PQA instruments MI 2892, MI 2792, MI 2592, MI 2492 and MI 2392.
Safe PV array measurements with PV Safety Probe:• Up to 1000 V & 15 A
Safe disconnection in any situation is ensured
1 2 3
DC SWITCH
1 0
AC SWITCH
1 0
L1
L2
L3
N
P
IN I3 C B A I1
L1 L3C
N A
I2
L2 B
A 1436
BluetoothTMoror
A 1436
Bluetooth
TM
TM
TM
RS232
PHOTOVOLTAIC AND ELECTRICAL INSTALLATION TESTERSMI 3108 EurotestPV and MI 3109 EurotestPV Lite
PHOTOVOLTAIC AND ELECTRICAL INSTALLATION TESTERSMI 3108 EurotestPV and MI 3109 EurotestPV Lite
PHOTOVOLTAIC AND ELECTRICAL INSTALLATION TESTERSMI 3108 EurotestPV and MI 3109 EurotestPV Lite
Electrical installation safety measurements:• Voltage and frequency,• Continuity tests,• Insulation resistance tests,• RCD testing,• Fault loop / RCD trip-lock impedance
measurements,• Line impedance / Voltage drop,• Phase sequence,• Earthing resistance tests,• Current measurements,• Power, harmonics and energy meas-
urements.
For complete electrical installation testing according to EN 61557 standards.
Recording of environment parameters:• Irradiance• Panel temperature• Ambient temperature.
Without accurate, real time values of environment parameters calculations of SCT values are not possible.
DC and AC Power measurements on PV generator and inverter:• Voltages, currents and power• Efficiency calculation• Scope function
PC SW EuroLink PRO Plus• Download, analysis and reporting
Module characteristics:• I-U Curve• Power Curve• Calculation of STC values• Determination of Pmpp
For first inspection, for periodic tests, for performance evaluation and troubleshooting of PV generators.
A set of testers and accessories for testing, evaluation and troubleshooting of photovoltaic installations.
Measurements according to EN 62446:• Insulation• Continuity• Uoc• Isc
Measurements according to EN 62446:• Insulation resistance tests,• Continuity tests,• Uoc and Isc measurements.
This are the minimum requirements for system documentation, commissioning tests, and inspection of PV installations.
New Commanders:With enhanced functionality to make testing even more effective.
For power and efficiency measurements on single or 3-phase inverters: 3-phase measurements are possible in combination with Metrel’s PQA instruments MI 2892, MI 2792, MI 2592, MI 2492 and MI 2392.
Safe PV array measurements with PV Safety Probe:• Up to 1000 V & 15 A
Safe disconnection in any situation is ensured
1 2 3
DC SWITCH
1 0
AC SWITCH
1 0
L1
L2
L3
N
P
IN I3 C B A I1
L1 L3C
N A
I2
L2 B
A 1436
BluetoothTMoror
A 1436
Bluetooth
TM
TM
TM
RS232
PHOTOVOLTAIC AND ELECTRICAL INSTALLATION TESTERSMI 3108 EurotestPV and MI 3109 EurotestPV Lite
PHOTOVOLTAIC AND ELECTRICAL INSTALLATION TESTERSMI 3108 EurotestPV and MI 3109 EurotestPV Lite
PHOTOVOLTAIC AND ELECTRICAL INSTALLATION TESTERSMI 3108 EurotestPV and MI 3109 EurotestPV Lite
Electrical installation safety measurements:• Voltage and frequency,• Continuity tests,• Insulation resistance tests,• RCD testing,• Fault loop / RCD trip-lock impedance
measurements,• Line impedance / Voltage drop,• Phase sequence,• Earthing resistance tests,• Current measurements,• Power, harmonics and energy meas-
urements.
For complete electrical installation testing according to EN 61557 standards.
Recording of environment parameters:• Irradiance• Panel temperature• Ambient temperature.
Without accurate, real time values of environment parameters calculations of SCT values are not possible.
DC and AC Power measurements on PV generator and inverter:• Voltages, currents and power• Efficiency calculation• Scope function
PC SW EuroLink PRO Plus• Download, analysis and reporting
Module characteristics:• I-U Curve• Power Curve• Calculation of STC values• Determination of Pmpp
For first inspection, for periodic tests, for performance evaluation and troubleshooting of PV generators.
A set of testers and accessories for testing, evaluation and troubleshooting of photovoltaic installations.
Measurements according to EN 62446:• Insulation• Continuity• Uoc• Isc
Measurements according to EN 62446:• Insulation resistance tests,• Continuity tests,• Uoc and Isc measurements.
This are the minimum requirements for system documentation, commissioning tests, and inspection of PV installations.
New Commanders:With enhanced functionality to make testing even more effective.
For power and efficiency measurements on single or 3-phase inverters: 3-phase measurements are possible in combination with Metrel’s PQA instruments MI 2892, MI 2792, MI 2592, MI 2492 and MI 2392.
Safe PV array measurements with PV Safety Probe:• Up to 1000 V & 15 A
Safe disconnection in any situation is ensured
SOLUTIONS FOR TESTING _Junij_2014_Ang
METREL d.d.Measuring and Regulation Equipment Manufacturer Ljubljanska 77, SI-1354 HorjulTel: +386 (0)1 75 58 200; Fax: +386 (0)1 75 49 226E-mail: metrel∞metrel.si; http://www.metrel.si
METREL GmbHMetrel Mess- und Prüftechnik GmbHOrchideenstraße 24, 90542 EckentalTel.: +49 9126 28996-0; Fax: +49 9126 28996-20E-mail: metrel∞metrel.de; http://www.metrel.de
Metrel UK Ltd. Test and Measuring Equipment Unit 1, Hopton House, Ripley Drive,Normanton, West Yorkshire, WF6 1QT Tel.: +44 (0) 1924 245 000 E-mail: info∞metrel.co.uk; http://www.metrel.co.uk
Note! Photographs in this catalogue may slightly differ from the instruments at the time of delivery. Subject to technical change without notice.
4
APPLICATIONS AND SOLUTIONS FOR TESTING AND ANALYSIS OF:
� Photovoltaic modules, strings and complete installations � Photovoltaic generator standards compliance � Troubleshooting of Photovoltaic systems � System documentation, commissioning, tests, and inspection of PV installations �Open Circuit Voltage and Short Circuit Current � I - U curve of PV modules and strings � Remote recording of solar irradiation and PV module temperature � Calculation of STC values � Power and efficiency calculations �Automatic test procedure according to EN 62446
PHO
TOV
OLT
AIC
AN
D E
LECT
RICA
L IN
STA
LLA
TIO
N T
ESTE
RSC
om
bin
ed P
ho
tovo
ltai
c &
Ele
ctri
cal M
ult
ifu
nct
ion
Tes
tin
g S
olu
tio
n
PHOTOVOLTAIC AND ELECTRICAL INSTALLATION TESTERSMI 3108 EurotestPV and MI 3109 EurotestPV LiteMI 3108 EurotestPV is a combined photovoltaic tester and electrical installations safety tester. It enables complete testing of electrical installations according to EN 61557 standards and in addition performs all necessary tests required on photovoltaic (PV) installations. This includes all of the tests as required by EN 62446, but also includes I - U characteristic, Calculation of STC values and power measurements on Inverter’s DC and AC sides. The unit is designed for the demanding working conditions (up to 1000 V, with 15 A DC). To greatly improve user safety the MI 3108 EurotestPV comes with the PV Safety Probe which ensures safe disconnection every time.
MI 3109 EurotestPV Lite is optimized for PV tests only. The Auto function is intended to perform a complete set of test needed for verification of PV installations according to EN 62446. With optional accessories the same PV test functionality as with MI 3108 EurotestPV is available.
MEASURING FUNCTIONS Photovoltaic installations:Measurements on DC side of PV instal-lation:• Voltage, current, power;• Uoc (Open Circuit Voltage) and Isc
(Short Circuit Current)• I - U curve of PV modules and strings;• Irradiance;• Module temperature.Measurements on AC side of PV installation (power quality):• Voltage, current, frequency, power, PF,
energy, harmonics;• Efficiency of PV module, inverter, PV
system calculation.
Electrical installations (MI 3108 only):• Insulation resistance*;• Continuity of PE conductors*;• Line impedance;• Loop impedance (sub-functions with
high current and without RCD tripping);• RCD testing (type AC, A and B);• Earth resistance;• AC current (load and leakage);• TRMS voltage, frequency, phase sequence;• Power, energy, harmonics.* Valid also for MI 3109
KEY FEATURES Photovoltaic installations:• Automatic test procedure according to
EN 62446 (MI 3109 only);• Calculation of STC values;• Efficiency calculations;• Graphical representation of module’s
I - U curve;• 2 voltage & 2 current channels for
simultaneous AC & DC parameters measurements;
• Optional 3-phase measurements in com-bination with Metrel’s PQA instruments.
• Optional PV Remote Unit for simultaneous measurements of solar ir-radiation and temperature of PV module.
Electrical installations (MI 3108 only):• Automated RCD testing procedure;• Support for B type RCD;• Earth resistance measurement;• Built-in fuse tables for automatic evalua-
tion of the line / loop impedance results;• Online monitoring of all 3 voltages;• Scope function;• Loop impedance test without tripping
the RCD;• 1-phase power and energy measurements
(including harmonics up to 11th).
MI 3109 MI 3108Electrical installation safetyInsulation resistance up to 1000 V −
Continuity 200 mA − Line / Loop Impedance − RCD A, AC,B − Earth resistance − Rotary field − PV installation safety (Panel)Insulation resistance up to 1000 V
Continuity 200 mA Uoc, Isc (1000 V/15 A) Extrapolation to STC I-V curve Vmpp, Impp, Pmax Solar measurements:Irradiance ○ / Module temperature ○ / Automatic test sequence
−
PV installation safety (Power) DC side measurements: U, I Power AC side measurements (single phase):U, I f Power PV array and inverter energy conversion efficiency
PF − Energy − Harmonics − Scope − GeneralMemory size I-V curve, Power (Scope) ~ 500 measurementsOther measurements ~ 1800 measurementsPC connectivity
Acc
esso
ries
MI 3
109
MI 3
108
STPS
STPS
A 1
401
Tip
com
man
der
--
○●
A 1
384
PV
saf
ety
prob
e○
●●
●A
142
7 P
V R
efer
ence
Cel
l ○
●●
●A
140
0 Te
mpe
ratu
re p
robe
○●
●●
A 1
391
AC
/DC
cur
rent
cl
amp
adap
ter
●●
●●
A 1
378
Rem
oteP
V○
●○
●M
C3,
MC
4 ad
apto
rs●
●●
●
- A
vaila
ble,
● –
Sta
ndar
d ac
cess
ory,
○ –
Opt
iona
l acc
esso
ry