pdl · pdl electrical products are designed and ... stages and right through to introduction to ......

PDL

PDL ELECTRICAL PRODUCTS

THE ULTIMATECHOICE IN DESIGNAND INNOVATIONOF ELECTRICALPRODUCTS.

Switch on to NewStandards in Elegance

Gold

Silve

r

Whit

e

Beige

Page 1

The PDL 1600 Designer Series is a significant

breakthrough in style and design excellence - a perfect

combination of good looks and feature-rich

practicality that brings new heights in elegance.

From the range of high quality plate finishes to the

stylish, chamfered edges, PDL’s 1600 Designer Series

will blend in beautifully with any decor. The high

quality finish - unhindered by any visible screw caps -

combines the practical advantages of a shiny, highly polished

switch plate with the fashionable, unobtrusive appearance.

Designed in consultation with practising electricians and

endorsed by leading architects, the PDL 1600 Designer

Series is a uniquely elegant addition to today’s decor

and design.

Grey

Light

Blue

Light

Gre

en

Mag

nolia

Page 2

Over seventy practising international electrical contractors wereinvolved in setting the design and feature specifications of thePDL 1600 Designer Series.

Behind the switch plates are a host of innovative time-savinginstallation and safety features built into the design. Extensivetesting at an independent Telarc-registered laboratory hasincluded electrical and mechanical endurance switching –equivalent to 100 years of ordinary use – bears testimony to thesuperiority of the PDL switch.

The 1600 Designer Series utilises the world-leading innovationof the front-loading 1500 Series module and is compatible withthe full range of 1500 Series specialty modules.

Designed by New Zealanders for international markets, the new1600 Designer Series is superior in so many ways.

Opposite are just ten reasons why PDL’s 1600 Designer Seriesis the obvious choice for contractors and architects!

The Obvious Choice…

Modules resistfrontal impact

PDL’s 1600 Series switchmodules cannot be pushedback into the mounting box ifthey are struck or pushedfrom the front. Made ofpolycarbonate, a high-impactengineering resin.

in at least ten waysInnovative Front-loading modules

The innovative front-fittingswitch modules of PDL’s 1600Series are clipped into apatented face plate and canonly be removed by using aspecial module ejecting tool.Modular system providesversatility.

International StandardsThe 1600 Designer Series aremanufactured to British Standardsin an ISO 9002 environment.

Vandal proof screwoptionAn optional screw can be usedto secure cover plate for addedsecurity.

10AX Switch ratingAs the 1600 Series utilisesthe proven 1500 Seriesmechanism, light switchesare rated at 10AXFlourescent.

Clip-on cover platesA range of clip-on coversconceal mounting screws andsimplify finishing anddecorating. Cover plates canbe removed for wall painting.

Choice of coverplates in highquality finishesCover plates come in twohighly popular metalfinishes – Gold and silver –plus seven designer colourswith an elegant, gloss finishthat’s easy to clean.

Switch identificationoptionsSwitches can have theirfunctions identified using anyone of a series of high-qualityidentification labels placedunderneath a transparentwindow. No need for engravedmodules.

1

3

4

5

6

8

9

72

High quality glossfinishAll cover plates feature anunobtrusive, aesthetically-pleasing gloss finish whichis practical and easy toclean.

Patented earthterminalPDL socket outlets have apatented earthing systemwhich is unique in that themounting screw contactsthe earth directly, not viathe normal hollow rivet.

Page 4

10

The world’s first front-fittingswitch module system

PDL’s front fitting module system is a patented world

first. Unlike other modular ranges of domestic

switchgear, PDL’s modules clips into place through the

front of the switchplate.

This unique safety feature prevents modules being

knocked back into the wall cavity from the frontal impact,

making them ideal for in use in Government buildings,

state houses, universities, schools and any commercial

installation where damage caused by the user has to be

PDL Electrical Products are designed and engineered to ISO 9001 in New Zealand byPDL Industries Engineering Centre and manufactured to ISO 9002.

corrected by costly maintenance schemes. It also

overcomes common domestic installation problems

such as TV coaxial modules being pushed back into the

wall cavity by coax plugs.

Once fitted, the modules may only be removed from the

switchplate with the aid of a special module ejector tool

supplied. This unique feature maximises end user

safety and prevents low profit return calls.

PDL ELECTRICAL PRODUCTS

Index1600 Series

Switches PagesPlate Switches 9Dimmer Switches 9-10Fan Speed Controller 10Control Switches 10-11Cooker Control Units 11Specialty Switches 12

ModulesSwitch Modules (Size 1) 13-14Control Switch Modules 14Illuminated Modules 15Non Switch Modules 15Communication Modules 15-16Data Modules 16Dedicated Switch Modules 16

Sub Plates & Cover PlatesFlush Plates 17Flush Cover Plates 17-18Blank Plates 18

Fused Connection Units1600 Series Fused Connection Units 18

Cord Outlets1600 Series Cord Outlet 18

Power Socket Outlets (SP) Single Pole& (DP) Double Pole

Switched Socket Outlets 13A 19Switched Socket Outlets 15A 1913A Unswitched Socket Outlets 1915A Unswitched Socket Outlets 2016A Universal Socket Outlet 20Double Pole Switched Sockets 20China Socket 21Hybrid Socket 21

Communication OutletsCommunication Outlets 21

Techincal DataWiring Diagrams 23-29

Index by Catalogue NumberProducts in Alpha Numerical order 30

All product development at PDL Industries is controlled by a quality managementsystem accredited to ISO 9001 and certified by IANZ (Telarc) New Zealand andASTA UK. ASTA is a significant UK-based certification authority.

Independent third party quality systems accreditation reinforces, from aninternational perspective, the excellence and quality of PDL products.

PDL Industries uses anindependent Telarc-registeredelectrical laboratory for itsproduct testing to ensurecontinuous quality.

PDL Electrical Products are designed and engineered to ISO 9001 in New Zealandby PDL Industries Engineering Centre and manufactured to ISO 9002.

Page 7

Quality Management Recognisedby IANZ (Telarc) and Asta

Independent third party testing,your guarantee of qualityThe design and manufacture of products by PDL Industries has always been backed by third partytesting and development facilities.

PDL uses Parkside Laboratories, an independent Telarc-registered electrical laboratory for itsproduct testing and Telarc-endorsed test reports to ensure international product acceptance.

The laboratory, in addition to ensuring technical quality levels are maintained on existing products, isan essential part of the development of new products, ensuring that PDL maintains the highestpossible standards as the latest technological ideas are introduced into our product ranges.

This support for product development and an emphasis on testing and retesting prior to productrelease illustrates PDL Industries’ strong product development discipline, taking the concepts ofquality design well into the early design stages and right through to introduction to manufacturing.

PDL’s 1600 Series - the world’s first front fitting

modular system of British standard electrical

wiring accessories, designed for maximum

installer versatility, specifier reliability and end

user safety.

The flush mounted 1600 Series form PDL

includes 13A and 15A switched and unswitched

socket outlets and modular lighting switches

plus specialist communication and illuminated

modules.

PDL’s 1600 Series is moulded from a high-

impact polycarbonate formulated exclusively for

PDL, giving a contemporary gloss finish that is

stylish while being extremely wear-resistant in all

domestic and commercial situations. PDL’s 1600

Series switches comply with BS 3676 Pt1: 1996.

Socket outlets comply with BS 1363 Pt2: 1995

and BS546:1950.

1600 Series FlushWiring Accessories

PLATE SWITCHES

1681/1W

1681/1W1 GANG 1 WAY SPPlate size: 89 x 89 x 12.5mmMounting centres: 60.3mmTerminals accommodate: 4-1.5mm sq cables each.250V a.c.10AX Fluorescent.

1681/2W1 GANG 2 WAY SPAs for 1681/1W.

1682/1W

1683/1W

1684/1W

Page 9

SWITCHES

Switches comply with Standards:- BS 3676 Pt1:1996

1681/1W BELL

1681/1W PRESS

1685

1693





16931 GANG 2 WAY SPPlate size: 89 x 89 x 12.5mmMounting centres: 60.3mmTerminals accommodate: 4-1.5mm sq cables each.250V a.c.40-500W Incandescent.

1681/1W BELL1 GANG SPRING RETURN1 WAY SP markedwith BELL symbolPlate size: 89 x 89 x 12.5mmMounting centres: 60.3mmTerminals accommodate: 4-1.5mm sq cables each.250V a.c.

1681/2W BELL1 GANG SPRING RETURN2 WAY SP markedwith BELL symbolAs for 1681/1W BELL.

1681/1W PRESS1 GANG SPRING RETURN1 WAY SP markedwith PRESS wordingPlate size: 89 x 89 x 12.5mmMounting centres: 60.3mmTerminals accommodate: 4-1.5mm sq cables each.250V a.c.

1681/2W PRESS1 GANG SPRING RETURN2 WAY SP markedwith PRESS wordingAs for 1681/1W PRESS.

16851 GANG INTERMEDIATE SPPlate size: 89 x 89 x 12.5mmMounting centres: 60.3mmTerminals accommodate: 4-1.5mm sq cables each.250V a.c.

DIMMER SWITCHES



1694

DIMMER SWITCHES cont...

16942 GANG DIMMER 2 WAYPlate size: 89 x 89 x 12.5mmMounting centres: 60.3mmTerminals accommodate: 4-1.5mm sq cables each.250V a.c.40 - 500W Incandescent.

1691K

1691K1 GANG DIMMER 1 WAYPlate size: 89 x 89 x 12.5mm.Mounting centres: 60.3mm.Terminals accommodate: 4-1.5mm sq cables each.250V a.c.1000W Incandescent.

FAN SPEED CONTROLLER

1697

16971 GANG FAN SPEEDCONTROLLERPlate size: 89 x 89 x 12.5mm.Mounting centres: 60.3mm.Terminals accommodate: 4-1.5mm sq cables each. 240V a.c. 50Hz 400VA.

1698

16982 GANG FAN SPEED CONTROLLERPlate size: 89 x 89 x 12.5mm.Mounting centres: 60.3mm.Terminals accommodate: 4-1.5mm sq cables each. 240V a.c. 50Hz 400VA.

1620

1620N

CONTROL SWITCHES

Switches comply with Standards:- BS 3676 Pt1:1996

16201 GANG 1 WAY DPPlate size: 89 x 89 x 12.5mmMounting centres: 60.3mmTerminals accommodate: 3-2.5mm sq cables each or 2-4.0mm sq cables each.250V a.c. 20A Resistive.Marked 20A.

1620AC1 GANG 1 WAY DPmarked AIR CONDITIONERAs for 1620.

1620WH1 GANG 1 WAY DPmarked WATER HEATERAs for 1620.

1620N1 GANG 1 WAY DPwith NEON INDICATORPlate size: 89 x 89 x 12.5mmMounting centres: 60.3mmTerminals accommodate: 3-2.5mm sq cables each or 2-4.0mm sq cables each.250V a.c. 20A Resistive.Marked 20A.

1620NAC1 GANG 1 WAY DPwith NEON INDICATORmarked AIR CONDITIONERAs for 1620.

1620NWH1 GANG 1 WAY DPwith NEON INDICATORmarked WATER HEATERAs for 1620.

1632

16321 GANG 1 WAY DPPlate size: 89 x 89 x 12.5mmMounting centres: 60.3mmTerminals accommodate: 3-2.5mm sq cables each or 2-4.0mm sq cables each.250V a.c. 32A Resistive.Marked 32A.

1632AC1 GANG 1 WAY DPmarked AIR CONDITIONERAs for 1632.

1632WH1 GANG 1 WAY DPmarked WATER HEATERAs for 1632.

Switches comply with Standards:- BS 4177:1992

1645NC

CONTROL SWITCHES cont...

1646NC

1645C

16451 GANG 1 WAY DPmarked ON, OFFPlate size: 89 x 89 x 12.5mmMounting centres: 60.3mmTerminals accommodate: 4-4.0mm sq cables each or 3-6.0mm sq cables each or 1-16.0mm sq cables each.250V a.c. 45A Resistive.

1645C1 GANG 1 WAY DPmarked ON, OFF, COOKERAs for 1645.

1645AC1 GANG 1 WAY DPmarked ON, OFF, AIRCONDITIONERAs for 1645.

1645WH1 GANG 1 WAY DPmarked ON, OFF, WATER HEATERAs for 1645.

1645N1 GANG 1 WAY DPwith NEON INDICATORPlate size: 89 x 89 x 12.5mmMounting centres: 60.3mmTerminals accommodate: 4-4.0mm sq cables each or 3-6.0mm sq cables each or 1-16.0mm sq cables each.250V a.c. 45A Resistive.

1645NC1 GANG 1 WAY DPwith NEON INDICATORmarked ON, OFF, COOKERAs for 1645N.

1645NAC1 GANG 1 WAY DPwith NEON INDICATORmarked ON, OFF,AIR CONDITIONERAs for 1645N.

1645NWH1 GANG 1 WAY DPwith NEON INDICATORmarked ON, OFF, WATER HEATERAs for 1645N.

COOKER CONTROL UNITS

Switches comply with Standards:- BS 4177:1992Switched Socket complies with Standards: - BS 1363 Pt2:1995

1646C1 GANG 1 WAY DP SWITCHwith 1 GANG SPSWITCHED SOCKETPlate size: 149 x 89 x 12.5mmMounting centres: 120mmTerminals accommodate: 4-4.0mm sq cables each or 3-6.0mm sq cables each or 1-16.0mm sq cables each.DP Switch 250V a.c. 45A Resistive.SP Switched Socket 250V a.c. 13A

1646NC1 GANG 1 WAY DP SWITCHwith 1 GANG SPSWITCHED SOCKETwith NEON INDICATORSAs for 1646C.

1632N

1632N1 GANG 1 WAY DPwith NEON INDICATORPlate size: 89 x 89 x 12.5mmMounting centres: 60.3mmTerminals accommodate: 3-2.5mm sq cables each or 2-4.0mm sq cables each.250V a.c. 32A Resistive.Marked 32A.

1632NAC1 GANG 1 WAY DPwith NEON INDICATORmarked AIR CONDITIONERAs for 1632N.

1632NWH1 GANG 1 WAY DPwith NEON INDICATORmarked WATER HEATERAs for 1632N.

Page 11

1682/2W PAC

Page 12

1682/2W PAC2 GANG 2 WAY SP SWITCHwith SPRING RETURNAIR CONDITIONERPlate size: 89 x 89 x 12.5mmMounting centres: 60.3 mmTerminals accommodate: 4-1.5mm sq cables each 250V a.c.

Used to activate Air ConditionerMotor Starters

1683/2W PNAC

1683/2W PNAC3 GANG 2 WAY SP SWITCHwith SPRING RETURNand NEON INDICATORAIR CONDITIONERPlate size: 89 x 89 x 12.5mmMounting centres: 60.3mmTerminals accommodate: 4-1.5mm sq cables each. 250V a.c.

Used to activate Air ConditionerMotor Starters

SPECIALTY SWITCHES

1585M

1585MINTERMEDIATE SPSWITCH MODULE4 Terminals accommodate: 4-1.5mm sq cables each.250V a.c.

Page 13

MODULES

SWITCH MODULES (SIZE 1)Switches comply with Standards:- BS 3676Pt1:1989

1580M

1580M1 WAY SP SWITCH MODULE2 Terminals accommodate: 4-1.5mm sq cables each. 250V a.c.10AX Fluorescent.

1581M

1581M2 WAY SP SWITCH MODULE3 Terminals accommodate: 4-1.5mm sq cables each. 250V a.c.10AX Fluorescent.

1580M FAN

1580M FAN1 WAY SP SWITCH MODULEmarked with FAN symbolTerminals accommodate: 4-1.5mm sq cables each.Some of the other options:LIGHT, FRIDGE, MICROWAVE,HEAT, H.W.S. (Hot Water System).ON/OFF, AUTO/MAN, TV.

Other marking are available ifvolumes are sufficient.250V a.c.10AX Fluorescent.

1580M LIGHT1 WAY SP SWITCH MODULEmarked with LIGHT symbolAs for 1580M FAN.

1580M BELL1 WAY SP SWITCH MODULEmarked with BELL symbolAs for 1580M FAN.

1580M PRESS1 WAY SP SWITCH MODULEmarked with PRESS wordingAs for 1580M FAN.

(Fan symbol)

(Light symbol)

1581M BELL

1581M BELLSPRING RETURN 2 WAY SPPRESS SWITCH MODULEmarked with BELL symbolBiased N/O.3 Terminals accommodate: 4-1.5mm sq cables each.250V a.c.

1581M PRESS

1581M PRESSSPRING RETURN 2 WAY SPPRESS SWITCH MODULEmarked with PRESS wordingBiased N/O.3 Terminals accommodate: 4-1.5mm sq cables each.250V a.c.

581M16HF

581M16HFSWITCH MODULE SPwith HINGED FLAP

Rating: 230V – 240V a.c.,50Hz, 2-Wayswitch module.

SWITCH MODULES (SIZE 1) cont...Switches comply with Standards:- AS3133.

1580M16N

1580M16N1W SWITCH MODULE SPwith NEON INDICATOR250V a.c.16A resistive.Neon flying leads can beconnected to provide “ON”indication, location ofswitch when “OFF”or permanently “ON”.

1587M10

1587M10DP SWITCH MODULE250V a.c.10AX Inductive to AS3133.

CONTROL SWITCH MODULESSwitches modules comply with Standards:- AS1431 Pt1.

1581M16PBS

1581M16PBS2 WAY SP SHROUDED PUSHBUTTON SWITCH MODULEN/C or N/O.Terminals accommodate: 4-1.5mm sq cables each.250V a.c. Operational current 4A AC11.415V a.c. Operational current 2A AC11.

1581M16PBM

1581M16PBM2 WAY SP MUSHROOM PUSHBUTTON SWITCH MODULEN/C or N/O.Terminals accommodate: 4-1.5mm sq cables each.250V a.c. Operational current 4A AC11.415V a.c. Operational current 2A AC11.

ILLUMINATED MODULES

1515M

1515MOPAL SYMBOLINDICATOR MODULETerminals accommodate: 4-4.0mm sq cables each, for direct connection to neon.250V a.c.Standard symbols available:

NO SMOKING

SHOWER ON

WAITER

ROOM SERVICE

Other markings are available ifvolumes are sufficient.

1510MN

1510MNNEON INDICATOR MODULE250V a.c.

2 Terminals accommodate:4-1.5mm sq cables each,for direct connection.

Standard colours available:Red, Green, Blue, Amber andClear.

1510ML12LAMP INDICATOR MODULE12V a.c./d.c.As for 1510MN.

1510ML24LAMP INDICATOR MODULE24V a.c./d.c.As for 1510MN.

1593M

1593MDIMMER MODULETerminal connection: Flying leads.240V a.c. 40-500W Incandescent

1588M

1588MBUZZER MODULETerminal connection: Flying leads.240V a.c.Noise level not less than 70dB.

1530M

1530MCORD OUTLET“BELL MOUTH” cable entry accommodates flexible cords up to 10 mm diameter,250V a.c.

1507M

1507MTV COAXIAL OUTLET MODULEmarked “TV”Suitable as TV and FM outlets.Solderless clamp terminals,Suits 75 ohm coaxial cable.PAL-type socket outlet.

1506MFM COAXIAL OUTLET MODULEmarked “FM”As for 1507M.

COMMUNICATION MODULES

1597M

1597MFAN SPEED CONTROLLER MODULETerminal connection: Flying leads.240V a.c. 50Hz 400VA.

NON-SWITCH MODULES

615MST

615MST‘ST’ TYPE FIBRE OPTICCONNECTOR MODULE‘ST’ multi-mode throughconnector.Comes with two yellow dustcovers in place.

615MF

615MF‘F’ TYPE CONNECTOR MODULE‘F’ Female/Female throughconnector.

DEDICATED SWITCH MODULES

Terminals accommodate 4 x 1.5mm cables each or 2 x 2.5mm cables each.

687M4

687M3ROTARY SWITCH MODULERating: 230V - 240V a.c.,Three-position switch module: 0, 1, 2.Other configurations available. eg AUTO, OFF, MAN

687M4ROTARY SWITCH MODULERating: 230V - 240V a.c.,Four-position switch module: 0, 1, 2, 3.Other configurations available.

1519 M6

1519 M66-WAY FCC RJ12 TEL SOCKETMODULE with IDCTERMINALS

DATA MODULES

619MDL

619MDLSame as 619MD with lid.

619MD

619MDRJ45 category 5 telephonesocket module.IDC terminals.

1516M

1516MBNC SOCKET50 Ohm.Solder terminals.

1541RM

1541RMRCA AUDIO CONNECTIONSOCKET coloured REDSolder type terminals.

1541BMRCA AUDIO CONNECTIONSOCKET coloured BLACKAs for 1541RM.

Page 16

COMMUNICATION MODULES cont . . .

1683CP

1683CPTHREE APERTURE COVERPLATE

1684CP

1684CPFOUR APERTURE COVERPLATE

Page 17

FLUSH COVER PLATES ONLY

PLATES

1681CP

1681CPONE APERTURE COVERPLATE

1682CP

1682CPTWO APERTURE COVERPLATE

1683

1683THREE APERTUREPlate size: 89 x 89 x 12.5mmMounting centres: 60.3mm.

1684

1684FOUR APERTUREPlate size: 89 x 89 x 12.5mmMounting centres: 60.3mm.

FLUSH PLATES

1681

1681ONE APERTUREPlate size: 89 x 89 x 12.5mmMounting centres: 60.3mm.

1682

1682TWO APERTUREPlate size: 89 x 89 x 12.5mmMounting centres: 60.3mm.

1650

1651

16501 GANG BLANK PLATEPlate size: 89 x 89 x 12.5mm.Mounting centres: 60.3mm.

16512 GANG BLANK PLATEPlate size: 149 x 89 x 12.5mm.Mounting centres: 120mm.

FUSED CONNECTION UNITS

1625

16251 GANG UNSWITCHEDwith CORD CLAMPand BOTTOM FLEX OUTLETPlate size: 89 x 89 x 12.5mm.Mounting centres: 60.3mm.Terminals accommodate: 3-2.5mm sq cables each or 2-4.0mm sq cables each.250V a.c. 13A Resistive.2A, 5A Versions also available.

Switched sockets comply with Standards:- BS 5733.

1626

16261 GANG SWITCHED DPwith CORD CLAMPand BOTTOM FLEX OUTLETPlate size: 89 x 89 x 12.5mm.Mounting centres: 60.3mm.Terminals accommodate: 3-2.5mm sq cables each or 2-4.0mm sq cables each.250V a.c. 13A Resistive.2A, 5A Versions also available.

1626N1 GANG SWITCHED DPwith CORD CLAMP andBOTTOM FLEX and NEONINDICATOR(See 1626 for details)

CORD OUTLETS

1636

16361 GANG CORD OUTLETUNSWITCHEDwith TERMINAL BLOCKPlate size: 89 x 89 x 12.5mm.Mounting centres: 60.3mm.Terminals accommodate: 3-2.5mm sq cables each or 2-4.0mm sq cables each.250V a.c. 20A.

Switched sockets comply with Standards:- BS 5733.

1650CP

1651CP

1650CP1 GANG BLANK COVER PLATE

1651CP2 GANG BLANK COVER PLATE

FLUSH COVER PLATES cont . . . BLANK FLUSH PLATES

13A UNSWITCHED SOCKET OUTLETS

1660

Switched sockets comply with Standards:- BS 546:1950.

16601 GANG UNSWITCHEDPlate size: 89 x 89 x 12.5mm.Mounting centres: 60.3mm.Terminals accommodate: 4-2.5mm sq cables each or 3-4.0mm sq cables each.250V a.c. 13A.

1668

16682 GANG UNSWITCHEDPlate size: 149 x 89 x 12.5mm.Mounting centres: 120mm.3 Terminals accommodate: 4-2.5mm sq cables each or 3-4.0mm sq cables each.250V a.c. 13A.

15A SWITCHED SOCKET OUTLETS

1667

16671 GANG SPPlate size: 89 x 89 x 12.5mm.Mounting centres: 60.3mm.3 Terminals accommodate: 4-2.5mm sq cables each or 3-4.0mm sq cables each.250V a.c. 15A.

1667N

1667N1 GANG SPwith NEON INDICATORPlate size: 89 x 89 x 12.5mm.Mounting centres: 60.3mm.3 Terminals accommodate: 4-2.5mm sq cables each or 3-4.0mm sq cables each.250V a.c. 15A.

SOCKET OUTLETS

13A SWITCHED SOCKET OUTLETSSwitched sockets comply with Standards:- BS 1363 Pt2:1995

1661

16611 GANG SPPlate size: 89 x 89 x 12.5mm.Mounting centres: 60.3mm.3 Terminals accommodate: 4-2.5mm sq cables each or 3-4.0mm sq cables each.250V a.c. 13A.

1661N

1661N1 GANG SPwith NEON INDICATORPlate size: 89 x 89 x 12.5mm.Mounting centres: 60.3mm.3 Terminals accommodate: 4-2.5mm sq cables each or 3-4.0mm sq cables each.250V a.c. 13A.

Page 19

1662

16622 GANG SPPlate size: 149 x 89 x 12.5mm.Mounting centres: 120mm.3 Terminals accommodate: 4-2.5mm sq cables each or 3-4.0mm sq cables each.250V a.c. 13A.

1662N

1662N2 GANG SPwith NEON INDICATORPlate size: 149 x 89 x 12.5mm.Mounting centres: 120mm.3 Terminals accommodate: 4-2.5mm sq cables each or 3-4.0mm sq cables each.250V a.c. 13A.

1666

16661 GANG UNSWITCHEDPlate size: 89 x 89 x 12.5mm.Mounting centres: 60.3mm.3 Terminals accommodate: 4-2.5mm sq cables each or 3-4.0mm sq cables each.250V a.c. 15A.

15A UNSWITCHED SOCKET OUTLET

1669

1669UNIVERSAL SOCKET OUTLETPlate size: 89 x 89 x 12.5mm.Mounting centres: 60.3mm.2 Terminals accommodate: 4-1.5mm sq cables each.250V a.c. 10/16A.

For use with BS, USA and CEE Standard plugs.

16A UNIVERSAL SOCKET OUTLET

1662DPN

1662DPN2 GANG DPwith NEON INDICATOR(See 1662DP details).

1662DPNE2 GANG DPwith NEON INDICATORAND SEGREGATED EARTH(See 1662DP details)

1662DPS

1662DPS2 GANG DPwith SURGE PROTECTORPlate size: 149 x 89 x 12.5mm.Mounting centres: 120mm.3 Terminals accommodate: 4-2.5mm sq cables each or 3-4.0mm sq cables each.250V a.c. 13A.(Replacement module SPM600).

1662DPNS2 GANG DP with NEON ANDSURGE PROTECTOR(Other details as 1662DPS).

1662DPNSE2 GANG DP with SURGEPROTECTOR and NEONINDICATOR andSEGREGATED EARTH(Other details as 1662DPS).

1662DPSE2 GANG DP with SURGEPROTECTOR andSEGREGATED EARTH(Other details as 1662DPS).

SPM600

SPM 600MOV replacement module forsurge protected power points.Maximum Dischargecurrent 6kA.Maximum OperatingVoltage 275V AC.Clamp Voltage 710V@50A.

1661DP

1661DP1 GANG DPPlate size: 89 x 89 x 12.5mm.Mounting centres: 60.3mm.3 Terminals accommodate: 4-2.5mm sq cables each or 3-4.0mm sq cables each.250V a.c. 13A.

1661DPE1 GANG DPwith SEGREGATED EARTH(See 1661DP details).

1661DPN

1661DPN1 GANG DPwith NEON INDICATOR(See 1661DP details)

1661DPNE1 GANG DPwith NEON INDICATOR ANDSEGREGATED EARTH(See 1661DP details).

1662DP

1662DP2 GANG DPPlate size: 149 x 89 x 12.5mm.Mounting centres: 120mm.3 Terminals accommodate: 4-2.5mm sq cables each or 3-4.0mm sq cables each.250V a.c. 13A.

1662DPE2 GANG DP WITHSEGREGATED EARTH(See 1662DP details).

DOUBLE POLE SWITCHED SOCKETS

COMMUNICATION OUTLETS

1606

16061 GANG FM COAXIAL OUTLETSuitable for FM applications.Suits 75 ohm Coaxial.Clamp terminals: Solderless.Suits Plug type PAL.Plate size: 89 x 89 x 12.5mm.Mounting centres: 60.3mm.

16071 GANG TV COAXIAL OUTLETAs for 1606, but suitable for TV applications.

1608

16081 GANG TV/FMCOAXIAL OUTLETBoth modules suitable for TV and FM applications.Suits 75 ohm Coaxial.Clamp terminals: Solderless.Suits Plug type PAL.Plate size: 89 x 89 x 12.5mm.Mounting centres: 60.3mm.

1609

1609ISOLATED TV/FMDIPLEXERCan be used as an outlet on master aerial systems.Suits 75 ohm Coaxial.Suits Plug type PAL.Plate size: 89 x 89 x 12.5mm.Mounting centres: 60.3mm.

1638/6W

1617S

1618

1638/6W1 GANG 6 WAYTELEPHONE OUTLETTermination: ScrewsSuits Plug Type RJ11Includes Spring ReturnShutter.Plate size: 89 x 89 x 12.5mm.Mounting centres: 60.3mm.

1617S1 GANG BT TELEPHONEMASTER OUTLETTermination: ScrewsPlate size: 89 x 89 x 12.5mm.Mounting centres: 60.3mm.Includes Spring Return Shutter.Suits Plug Type BT.

1618S1 GANG BT TELEPHONESECONDARY OUTLETAs for 1617S.

16171 GANG BT TELEPHONEMASTER OUTLETTerminals accommodate: 2-0.4mm sq cables each. or 2-0.5mm sq cables each.Termination: IDC (InsulationDisplacement Connectors).Plate size: 89 x 89 x 12.5mm.Mounting centres: 60.3mm.Includes Spring Return Shutter.Suits Plug Type BT.

16181 GANG BT TELEPHONESECONDARY OUTLETAs for 1617.

1670/15

1670/151 GANG UNSWITCHEDSOCKETPlate size: 89 x 89 x 12.5mm.Mounting centres: 60.3mm.15 AMP 250VAC.

CHINA SOCKET

1679

16791 GANG HYBRID SOCKETPlate size: 89 x 89 x 12.5mm.Mounting centres: 60.3mm.10A/16A 250VAC.

HYBRID SOCKET

TECHNICAL DATA WIRING DIAGRAMS

Page 22

Cat 1580M 1 Way Switch Module

Rear view of switch modules

N

L

L2

L1

L2

L1

LOAD

Cat 1580M BELL 1 Way Spring Return Switch Module

Diagram shows Normally Open (NO) connection

N

L

L2

L1 LOAD

Cat 1585M Intermediate Switch Module


N

LOAD

L

1581M 1585M intermediate switch 1581M

Any number of intermediate switches can be wired between the 2 way switches

L3

L2

L1

L3

L2

L1

3

12

4

1

3

24

L

1

L

CN

Load

L

1

L

CN

Load

Cat 1580M16N 1 Way Neon Switch Module

Neon permanently ON Neon ON, switch OFF (locator) Neon ON, switch ON (indicator)


L

1

L

CN

Load

Neonwires

Neonwires

Neonwires

LOOP1

CL

Cat 1581M 2 Way Switch Module


N

L

L3

L2

L1

L3

L2

L1

L2

L1

L3

LOAD


Diagram shows Normally Closed (NC) connection

Cat 1581M BELL 2 Way Spring Return Switch Module


N

L

L3

L2

L1 LOAD

N

L

L3

L2

L1 LOAD

L2

L1

L3

WIRING DIAGRAMS

Page 23

L2

Cat 1581M Master Switching for Security

Cat 1593 & 1593M Dimmer (1 way Circuit)

L2

1581MLamp Lamp

L

N

Yellow wire

White wire

1593MDimmerL1

L3

Cat 1593 & 1593M Dimmer (2 way Circuit)

1581M

1581M

Lamp LampL

N

Brown wire

White wire

1593MDimmer

L2

L3

L1 L1

L2

L3

1581M

L2

L3

L1L

N

1581M1581M

L2

L3

L1

1581M

L2

L3

L1

Lamp Lamp Lamp

L2

L3

L1

1581M

Rear view of switch


N

L

2

1

CLOAD

L

Diagram shows Normally Closed (NC) connection

N

L

2

1

C

L

LOAD

Cat 1581M16PBS, 1581M16PBP & 1581M16PBM Push Button Switch Modules

LOOP1

CL

2

Cat 1520N & 1532N (with Neon)Cat 1520 & 1532 Double Pole 1 Way Switches


L1L1 L3

L1 L3

L1

L3

L3

L1

L1

L3

L3

L1 L3

L1 L3

WIRING DIAGRAMS

Page 24

Segregated Earth

12V/24V

N

L

Cat 1515M, 1510MN 250V Indicator Modules

N

L

2

1

2

1

250V AC

Rear viewof module

Rear viewof module

Cat 1510ML12, 1510ML24 12/24V Indicator Modules

L2

L3

L2

L3

Cat 1626 Fused Connection Unit with DP Switch

Rear view of switchN FEED

N LOAD

L FEED

L LOAD

Fuse

These products provide facilities for “Clean Earth Connection”.

The socket outlet earth being independent of other connections.

Cat 1646C Cooker Unit

Cat 1646NC Cooker Unit with Neon

LIVE LOAD

LIVE FEED

NEUTRAL FEED

EARTHEARTH

NEUTRAL LOAD

N1

N2

L1

L2

N1 L1

N2 L2

LIVE LOAD

LIVE FEED

NEUTRAL FEED

EARTHEARTH

NEUTRAL LOAD

N1

N2

L1

L2

N1 L1

N2 L2

LFEED

NFEED

NLOAD

LLOAD

WIRING DIAGRAMS

Cat 1645 1 Gang 1 Way DP marked On, Off Switch (45A)

Cat 1638/6W 1 Gang 6 Way Telephone Outlet

Cat 1645N 1 Gang 1 Way DP with Neon Indicator Switch (45A)

Cat 1661 1 Gang Single Pole Switched Socket

L1

L2

N1

N2

N FEED

EARTH EARTH

L FEED

N LOAD L LOAD

L1L1

L2

N1

N2

WHITE

BLACK

RED

BLUE

YELLOW

GREEN

L1L1

L2

N1

N2

L1

L2

N1

N2

N FEED

EARTH EARTH

L FEED

N LOAD L LOAD

N

L

LIVE

NEUTRAL

EARTH

N

L

WIRING DIAGRAMS

Page 26

Cat 1661DP 1 Gang Double Pole Switched Socket

Cat 1662 2 Gang Single Pole Switched Socket

Cat 1662DP 2 Gang Double Pole Switched Socket

Cat 1662DPE 2 Gang Double Pole Switched Socket with Segregated Earth

Cat 1661DPE 1 Gang Double Pole Switched Socket with Segregated Earth

LN

LIVE

NEUTRAL

EARTH

NL

EARTH

LIVE

NEUTRAL

EARTH

NL

LN

LIVE

NEUTRAL

EARTH

N

LE

L

N

E

LN

LIVE

NEUTRAL

EARTH

N L

EARTH

N L

E

LIVE

NEUTRAL

EARTH

N L

Cat 1662DPSE 2 Gang Double Pole Switched Socket with Surge Protector and Segregated Earth

Cat 1670 1 Gang Unswitched Socket

Cat 1679 1 Gang Hybrid Socket

Cat 1662DPS 2 Gang Double Pole Switched Socket with Surge Protector

L

E

N

N

LIVE

NEUTRAL

EARTHL

EARTH

AP E NAP

E

N

LIVE

EARTH

NEUTRAL

N

NL

L

LIVE

EARTH

N

NL

L

NEUTRAL

N

LIVE

NEUTRAL

EARTHL

L

E

N

WIRING DIAGRAMS

Page 28

1509

TV/FM Aerial

Building

1509

1509

Signal3

Rear view of module

Cat 1509M TV/FM Diplexers used in Multi-Outlet Installation

Cat 1507M & 1506M TV/FM Connection

Braid rolled back

3

1507M/1506M module

Rear view of module

8mm

Stripping guide actual size

2

15mm

1

Coaxial cable

Cat 1541RM & 1541BM Audio Connection

Solder cable to terminals.Use cable marking.Trace to ensurecorrect polarity. EARTH

7mm

Rear view of module

Stripping guide actual size

1

10mm

Coaxial cable

Braidrolledback

5mm

2

FM

TV

NOTES

Page 29

INDEX

Page 30

Cat No. Page 581M16HF 13 615MF 16 615MST 16 619MD 16 619MDL 16 687M3 16 687M4 161506M 151507M 151510ML12 151510ML24 151510MN 151515M 151516M 161519M6 161530M 151541BM 161541RM 161580M 131580M BELL 131580M FAN 131580M LIGHT 131580M PRESS 131580M16N 141581M 131581M BELL 131581M PRESS 131581M16PBM 141581M16PBS 141585M 131587M10 141588M 151593M 151597M 151606 211607 211608 211609 211617 211617S 211618 211618S 21

Cat No. Page1620 101620AC 101620N 101620NAC 101620NWH 101620WH 101625 181626 181626N 181632 101632AC 101632N 111632NAC 111632NWH 111632WH 101636 181638/6W 211645 111645AC 111645C 111645NC 111645N 111645NAC 111645NWH 111645WH 111646C 111646NC 111650 181650CP 181651 181651CP 181660 191661 191661DP 201661DPN 201661DPNE 201661DPE 201661N 191662 191662DP 201662DPN 201662DPNS 20

Cat No. Page1662DPNE 201662DPNSE 201662DPS 201662DPE 201662DPSE 201662N 191666 201667 191667N 191668 191669 201670/15 211679 211681 171681CP 171681/1W 91681/1W BELL 91681/1W PRESS 91681/2W 91681/2W BELL 91681/2W PRESS 91682 171682CP 171682/1W 91682/2W 91682/2W PAC 121683 171683CP 171683/1W 91683/2W 91683/2W PNAC 121684 171684CP 171684/1W 91684/2W 91685 91691K 101693 91694 101697 101698 10SPM 600 20

PDL Dealer:

PDL HOLDINGS LTD - THE GROUP

THE PDL GROUPOF COMPANIES

For over 60 years, the PDL Groupof Companies has built an enviable

international reputation foundedon the concept that “continuous

quality is quality you trust”.

PDL is globally recognised formanufacturing the very best in

electrical accessories, industrialswitchgear, AC variable speed

drives, custom plastic productsand electrical consumerappliances to the highest

international standards. PDLproducts are now distributed to

over 40 countries includingNew Zealand, Australia, the United

Kingdom, Europe, Asia, NorthAmerica, the Pacific and the

Middle East.

Continuous investment in researchand development has provided thePDL Group with some of the most

sophisticated world-widetechnology and this, together withinnovation, design excellence and

independent third-party qualityassurance schemes, has ensuredPDL an excellent reputation in the

international market.

The commitment to R&D hasunderpinned the current successof PDL Holdings’ nine subsidiarycompanies and their continuedfurther growth. Currently, the

Group employs 1900 people overthree continents - Australasia,Asia and Europe and has anannual turnover in excess of

$NZ350 million.

PDL GROUP PRODUCTSProducts manufactured and distributed by PDL Group companies are:

• PDL electrical wiring accessories for domestic, commercial and industrial applications,including PDL 1600 Designer Series.

• PDL Smartwires intelligent automated systems.

• PDL PIR Sensors, PDL Residual Current Devices and PDL Powerboards.

• PDL fan heaters and cooling fans.

• PDL Modempak cable management and distribution products for the Data andTelecommunications industries.

• AC Motor Speed Controllers including Xtravert, Microdrive-i, Microdrive-Eliteand Ultradrive Elite, and Nu-Start AC Motor Soft Starters.

• D-PRO Air Circuit Breakers, NFC Fuse Switch Units, Current Transformers and variousfusegear.

• Specialist plastic custom moulding including injection and blow moulded bottles, packs andclosures for all sectors of the packaging industry.

Q17347PDL 1600 3-00

pdl · pdl electrical products are designed and ... stages and right through to introduction to ......

Documents