electromechanical door operators -...

Electromechanical Door OperatorsD

oor Closers

4.35Lockwood Product Catalogue Module (Version 1.2)

1300 LOCK UP (1300 562 587) lockweb.com.au

Electromechanical Door Operators and Closers

Electromechanical Door Operators

4.36Lockwood Product Catalogue Module (Version 1.2) 1300 LOCK UP (1300 562 587) lockweb.com.au

General InformationThe Lockwood 8002 Swing Door Operator is an electro-hydraulic operator designed for a wide variety of applications. It is suitable for almost all types of external and internal swing doors and has been developed to cope with tough conditions. The operator can be mounted on either side of the door for pull or push action and is suitable for single or double doors fitted with butt hinges or pivots.

Suitable for disabled access, nursing homes and hospital corridors - where the requirements are for silence, flexible operation and reliability - as it is for department stores, banks, hotels, etc.

OpeningWhen an opening impulse is received by the control unit, the motor starts and the hydraulic unit rotates the drive shaft and arm system (door) with high speed towards the open position. Before reaching the fully open position, the speed is reduced to low speed. The door stops, and the motor rotation ceases when the selected door opening angle is reached. This open position is held by the hydraulic valve.

ClosingThe spring closing starts when the hold-open time has run out. Before reaching the fully closed position, the speed is reduced to low speed, which will be kept until the door is completely closed. The door is held closed by spring power. to overcome the resistance of a striking plate, the ‘lock kick’ can be adjusted to required level.

Lock KickTo overcome the resistance of a striker plate, door seals the ‘lock kick’ can be adjusted to the required level of resistance. This will ensure that the lock bolt will securely engage into the striker plate.

Door Specification• Max door weight 250kgs

• Max door width 1600mm

• Access controlled locking (Pull side reduces power by 30%)

• Maximum opening angle 120°.

8002 Electromechanical Door Operator

FIRE RATED

Lockwood Swing Door Operators have been successfully tested on fire door assemblies in accordance with Australian Standard AS1905.1:1997 fire resistant doorsets.

Ordering Information

Swing Door Operator (PUSH SIDE) 8002SSIL

Swing Door Operator (PUSH SIDE) 8002PSIL

Accessories

Telescopic Arm 110 – 235mm Reveal (PUSH SIDE) 8002-173005

Telescopic Arm 235 – 360mm Reveal (PUSH SIDE) 8002-173004

Joint for Telescopic Arm 235 – 485mm Reveal (PUSH SIDE) 8002-173191

Doorstop – Push Arm System 8002-100147

Spacer for Door Fitting 8002-173804BK

Push and Go Function 8002-65514

Part NumberProduct Description


oor Closers



Specification StatementThis Door Operator must have an electro-hydraulic motor with a capacity to push or pull doors up to 250kg in weight. The operator can be mounted on either side of the door for pull or push action and should be suitable for single or double doors fitted with butt hinges or pivots. The operator should have inputs for various electronic keypad controllers and motion sensors.

Technical Information

Electrical 230V AC mains power, 50 Hz fuse10 A

Door leaf width Maximum door width – 1600mm

Recommended door weight

Maximum door weight – 250 kg

Door opening angle Maximum opening angle - 120°

Closing power EN Size 3 to 6

Environment Operational temperature range: -15°c to + 50c

Dimensions 110 (H) x 110 (D) x 716 (L) mm

298

Y = Shaft Extension48 068 2098 50118 70

38

A

110

110

80

13M

in. 3

1

110

110

38

4580

13

A

Y

Min

. 25

23

Pull Side Push Side


For product availability please refer to the current price list, contact customer service or your local sales office.

Mounting Instruction Guide

100

CL

CL

X =

2–1

7 / 3

7 / 6

7

80

50

1380

23

13

250 45

217 364 100

CL

CL

X =

46

/ 66

/ 96

285901

217 364

Push Side

X = Shaft Extension

Pull Side

X = Shaft Extension



8002 Series Swing Door Operator

Pushing Arm System

Pushing arm system, where the operator isinstalled on the wall on the opposite side of thedoor swing. Door opening angle adjustable upto 120°. Swing arm operator package comeswith silver cover and black push arm.

Part Number8002PSIL

Pulling Arm System

Pulling arm system, where the operator isinstalled on the wall on the same side as thedoor swing. Door opening angle adjustable upto 120°. Swing arm operator package comeswith silver cover and black pull arm.40% Power loss.

Part Number8002SSIL

21

3

max.120°

2

ControlsSeparate valves control door opening, closing and latching speeds.

1 Opening Angle 120°, Opening Speed 1.5 – 4 seconds

2 Closing Speed 1.5 – 4 seconds

3 Lock Kick

Lock KickTo overcome the resistance of a striker plate, the ‘lock kick’ canbe adjusted to the required level of resistance. This will ensurethat the lock bolt will securely engage into the striker plate.

7015

00

HS

O

HS

O

LSO

LSO

LSC

LK

HS

C

HS

C

LSC

7014

48

LK

HSOHigh Speed Opening.

LKScrew for adjustment of‘Lock Kick’(normally closed).

LSCLow Speed Closing.

HSCHigh Speed Closing(normally closed).

2Screw for adjustment ofpump pressure.

1Screw for adjustmentof spring force.LSO

Low Speed Opening.



Pushing Arm System


Part Number8002PSIL

Pulling Arm System


Part Number8002SSIL

21

3

max.120°

2




3 Lock Kick


7015

00

HS

O

HS

O

LSO

LSO

LSC

LK

HS

C

HS

C

LSC

7014

48

LK







Low Speed Opening.


Pushing Arm System


Part Number8002PSIL

Pulling Arm System


Part Number8002SSIL

21

3

max.120°

2




3 Lock Kick


7015

00

HS

O

HS

O

LSO

LSO

LSC

LK

HS

C

HS

C

LSC

7014

48

LK







Low Speed Opening.


Pushing Arm System


Part Number8002PSIL

Pulling Arm System


Part Number8002SSIL

21

3

max.120°

2




3 Lock Kick


7015

00

HS

O

HS

O

LSO

LSO

LSC

LK

HS

C

HS

C

LSC

7014

48

LK







Low Speed Opening.

Pushing Arm SystemPushing arm system, where the operator is installed on the wall on the opposite side of the door swing. Door opening angle adjustable up to 120°. Swing arm operator package comes with silver cover and black push arm.

Part Number8002PSIL

Pulling Arm SystemPulling arm system, where the operator is installed on the wall on the same side as the door swing. Door opening angle adjustable up to 120°. Swing arm operator package comes with silver cover and black pull arm. 40% Power loss.

Part Number8002SSIL

Speed and Force AdjustmentsThe opening and closing speeds can be varied individually.

Lock KickTo overcome the resistance of a striker plate, the ‘lock kick’ can be adjusted to the required level of resistance. This will ensure that the lock bolt will securely engage into the striker plate.


1 Opening Angle 120°, Opening Speed 1.5 - 4 seconds

2 Closing Speed 1.5 - 1.4 seconds

3 Lock Kick

4 Push and go function add. 8002-655614


oor Closers




Reveal Depth (A)Pushing Arm System

Arm Extension8002-173004 A = 235 - 360mm 8002-173191 Joint for 235 - 485mm

Pulling Arm System

Packer8002-173804BK A = 0 - 130mm Standard = 130 - 170mm

Reveal Depth (A)

Pushing Arm System

Arm Extension

8002-173004 A = 235 – 360 mm

8002-173191 Joint for 235 – 485 mm

Pulling Arm SystemA = 0 mm

Packer

8002-173804BK A = 0 – 130 mm

Standard = 130 – 170 mm

7015

00

HS

O

HS

O LSO

LSO

LSC

LK

HS

C HS

C

LSC

7014

48

LK

701500

HS

O

HS

OLSO LSO

LSC

LK

HS

CHS

C

LSC

701448

LK

25

6

6

‘Master’ door

‘Slave’ door

"Master"

"Slave"

AA

Reveal Depth (A)

Pushing Arm System

Arm Extension

8002-173004 A = 235 – 360 mm

8002-173191 Joint for 235 – 485 mm


Packer

8002-173804BK A = 0 – 130 mm


7015

00

HS

O

HS

O LSO

LSO

LSC

LK

HS

C HS

C

LSC

7014

48

LK

701500

HS

O

HS

OLSO LSO

LSC

LK

HS

CHS

C

LSC

701448

LK

25

6

6

‘Master’ door

‘Slave’ door

"Master"

"Slave"

AA

Reveal Depth (A)

Pushing Arm System

Arm Extension

8002-173004 A = 235 – 360 mm

8002-173191 Joint for 235 – 485 mm


Packer

8002-173804BK A = 0 – 130 mm


7015

00

HS

O

HS

O LSO

LSO

LSC

LK

HS

C HS

C

LSC

7014

48

LK

701500

HS

O

HS

OLSO LSO

LSC

LK

HS

CHS

C

LSC

701448

LK

25

6

6

‘Master’ door

‘Slave’ door

"Master"

"Slave"

AA

Reveal Depth (A)

Pushing Arm System

Arm Extension

8002-173004 A = 235 – 360 mm

8002-173191 Joint for 235 – 485 mm


Packer

8002-173804BK A = 0 – 130 mm


7015

00

HS

O

HS

O LSO

LSO

LSC

LK

HS

C HS

C

LSC

7014

48

LK

701500

HS

O

HS

OLSO LSO

LSC

LK

HS

CHS

C

LSC

701448

LK

25

6

6

‘Master’ door

‘Slave’ door

"Master"

"Slave"

AA

Shaft: Standard8002 - 173107Shaft Extension: 20mm

8002 - 173109Shaft Extension: 70mm

8002 - 173108Shaft Extension: 50mm

Shaft Extension

Reveal Depth (A)

Pushing Arm System

Arm Extension8002-173004 A = 235 – 360 mm8002-173191 Joint for 235 – 485 mm


Packer

8002-173804BK A = 0 – 130 mmStandard = 130 – 170 mm

7015

00

HS

O

HS

O LSOLS

O

LSC

LK

HS

C

HS

C

LSC

7014

48

LK

701500

HS

O

HS

OLSO LS

O

LSC

LK

HS

C

HS

C

LSC

701448

LK

2

56

6

‘Master’ door

‘Slave’ door

"Master"

"Slave"

A

A

Double Door Coordination UnitGuarantees safe and correct closing of rebated doors. Often in combination with fire doors.

2 x 8002PSIL Operators 1 x 8002 - 100091 Coordinator Full length cover to be specified seperately.




Operator with Motion Detector/Elbow Switch• 1 x 8002 Swing Door Operator • 1(2) x 8002 - 1700007 Radar Activation Unit • 1(2) 8002 - 1700008 Elbow Switch

Outside activation unit detects the presence of an object in its range and automatically opens the door.

Inside activation with an 8002 - 1700008 Elbow switch for manual activation on one side.

Ideally suited for doorways where usage is primarily for people carrying goods, pushing trolleys, wheelchairs or beds.

Overhead Presence Detection (Supervisor)• 1 x 8002 Swing Door Operator • 1(2) x 8002 - 1700007 Radar Activation Unit • 1(2) 8002 - 1700008 Elbow Switch • 1 x 8002EXB • 1 x 8002ACCE 152 Zone presence detector

The overhead presence detector mornitors any movement or obstruction within the ark of the door swing area.

It can be installed on either the pull or push side of the door. e.g if a person is standing inside the opening ark of the door, the door cannot be opened until the zone is clear of the obstruction.

Operator with Safety Sensor (Eye tech)• 1 x 8002 Swing Door Operator • 1(2) x 8002 - 1700007 Radar Activation Unit • 1(2) 8002 - 1700008 Elbow Switch • 1 x 8002 - 738765 Eye-Tech infr-red presence detector 8002 x 738765 = 340mm long 8002 x 738766 = 700mm long 8002x 738767 = 900mm long • 1 x 8002 - 655614 Limit switch for presence push and go detection or indication

Safety for swing doorsSingle swing door

Safety for swing doorsDouble swing door

Application

Safety for swing doorsSingle swing door

Safety for swing doorsDouble swing door

Application

WIDTH: 1.8MDEPTH: 1.2M

Note: This presence detector is a safety device to prevent the door opening or closing when anobject is within the arch of the door, to activate the door opening or closing a door activationaccessory also needs to be fitted.

EG: radar activation unit or elbow switch.

Note: The presence detector operates as a door activator when a person enters the zone on the PUSH side. Once the door is open it remains open until the person has gone through. As a safety sensor, on the PUSH side it protects persons of objects from being hit by the door if the door has been stopped by the safety sensor on the PULL side and is closing after the pause time. In this case the door remains stationary and only moves in the unobstructed direction. Ideally suited for areas where beds and frail people need to ensure that the door will not close on them until completely clear of the doorway.


oor Closers



5002 Swing Door Operator

General InformationThe Lockwood 5002 swing door operator has been designed for most internal door applications. The small discrete form factor allows the 5002 to be installed on more doors than its larger counterpart. The unit can be installed to 80kg (push) or 60kg (pull) doors.

The virtually silent electro mechanical operator offers variable opening and closing speeds, allowing the 5002 to efficiently open doors without hitting unnecessary obstacles.

The operator can be opened with a radar, card reader or push buttons. Further more, the intelligent Push & Go feature can sense that you are manually trying to push or pull the door and the operator will automatically assist you in opening the door and automatically close the door after a predetermined time.

Features• Push or pull doors (Push Standard)

• Low noise

• 60–80kg door weight

• Allow 30% reduction for pushside

• Low resistance if used manually (Push & Go)

• Adjustable hold open time – 0 to 60 seconds

• Pre-pull before opening when connected to electro mechanical lock

• Push & Go function as a standard function

• Built in 24 VDC/0.5 A power supply

• 6 door weight settings to minimise impact of obstacles

• Opening input can be controlled by various electronic devices such as readers, keypads, switches and radar beams

• Safety beam input for opening or closing

• Simple to program

• Software interface for maintenance and additional adjustments for the installer

Part Numbers

Push Side

5002SIL Door Operator (includes mounting plate)

Pull Side

5002SIL Door Operator (includes mounting plate)

+ DC194/100000 Slide arm assembly for pull side

5002SIL Push Operator

Applications• Offices, meeting rooms

• Disabled homes and doors

• Public disabled toilets

• Baby changing rooms

• Nursing homes

• Child care facilities

• Residential use

Note: This is only to be used on internal doors where wind pressure will not effect the operation.

• Conforms in accordance to AS1428.1-2009 with regards to: Force required to operate door when manual mode is selected (Less than 20n)




Operator with Motion Detector/Elbow Switch• 1 x 5002SIL Swing Door Operator • 1(2) x 8002 - 1700007 Radar Activation Unit • 1(2) 8002 - 1700008 Elbow Switch

Outside activation unit detects the presence of an object in its range and automatically opens the door.

Inside activation with an 8002 - 1700008 Elbow switch for manual activation on one side.

Ideally suited for doorways where usage is primarily for people carrying goods, pushing trolleys, wheelchairs or beds.

Operator Interconnected to ES9000 Series Electric Strike Outside• Keypad or card reader sends signal to open

ES9000 strike to release Door Lock, operator signal sent to 5002SIL to Open Door.

Inside• 8002-17007 Radar Activation Unit or

8002-170008 Elbow switch.

• Ideally suited to doors with locking requirements.

Note: This solution also suitable for Lockwood 8002 operator.


oor Closers




Specification StatementThe operator must be symmetrical suitable for left and right hand installations. The operator must have the capacity to push or pull doors up to 80kg. The operator must have 6 strength settings to minimise impact of obstacles. The operator must work in conjunction with a electromechanical mortice lock and have the intelligent pre-pull feature before unlocking the lock minimising the preload effect on the electro mechanical mortice lock.

5002 Swing Door Operator Technical Information

Product size (L) 523mm x (H) 68mm x (W) 80mm

Weight 3.5kg

Supply voltage 230 VAC (±15%) 50–60 Hz

Back-up Inlet 24 VDC (±15%) 2A

Enclosure class IP20

Temperature range

Storage -20–70°COperation 0–40°C

Current draw Power output 24 VDC max 500 mAPotential free relay output0.8 A @ 30 VDC resistive load0.3 A @ 30 VDC inductive load

Max door weight 80 kg with standard arm, closing side installation60 kg with sliding arm, opening and closing side installation

80

68

- +

80

Frame depth H

68Min

. 2

* Mitta koneiston alareunasta The measure from to bottom of the operator** Mitta karmin alareunasta The measure from the bottom of the frame

32,5

Frame depth H

68

80

Min

. 10

20** 42

Min

. 21*

Max

. 32*

340

Ø 6

Hinge line

Sliding arm to the push side Sliding arm to the pull side Standard arm to the push side

60kgs 60kgs 80kgs

ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience

Lockwood is the leading brand in the Australian locking industry. With an established reputation for high quality products, this iconic brand provides a wide range of locking solutions to residential housing, commercial building and industrial application markets. Lockwood is supported by an extensive distribution and after-sales support network. Our customers include retailers, architects, trade and industrial personnel, locksmiths and security dealers.

ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience.

ASSA ABLOY is represented in all major regions, in both mature and emerging markets, with leading positions in Australia, Europe and North America.

As the world’s leading lock group, ASSA ABLOY offers a more complete product range of door opening solutions than any other company in the market.

Australia 1300 LOCK UP (1300 562 587) lockweb.com.au

New Zealand +64 9415 7111 assaabloy.co.nz

ASSA ABLOY Australia Pty Ltd 235 Huntingdale Road Oakleigh, Victoria, 3166 Australia

[email protected]

ASSA ABLOY New Zealand Ltd 6 Armstrong RoadAlbany, North Shore City, 0632New Zealand

[email protected]

ASSA ABLOY Australia Pty Limited ABN 90 086 451 907 ©2013

electromechanical door operators -...

Documents