electronic activated flushvalve 1600t and 1601t...

Electronic Activated Flushvalve1600T and 1601T Series

Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability. Page 7.C.1

(1) When used for TOP Inlet Urinal Fixture - Exposed Tubing, Flanges, Elbow, etc. SUPPLIED by OthersRefer to www.specselect.com for individual models. Note: Use this page front and back, with specification drawing page referenced above, as product submittal sheets.

0 0 0

Engineer/Architect Approval

Model Specified:

Approval: Date:

Specification: (example)• Battery (4 ‘C’ cell) or Hardwire (24 VAC) infrared electronic

activated concealed flushvalve system• Stainless steel cover with integral sensor utilizing H2OPTICS

™

technology and S/S vandal resistant mounting screws• Metal mounting box or frame, power function light, field selectable

sensor range • Preset blocking time, built-in activation delay• Electronic manual override• Solenoid operation valveand... with... (add for fixture type required)

with... (add control/sensor box required)with... (transformer - specify separately - See Back Page)

FIXTURE TYPE NOT APPLICABLE CONTROL/SENSOR BOX

2 22

1 11

3 33

5 55

7 77

9 99

4 44

6 66

8 88

TOILET - Back Inlet- Wallhung- 1-1/2" Spud

TOILET - Back Inlet- Free Standing- 1-1/2" Spud

TOILET - Top Inlet- Free Standing

or Wallhung- 1-1/2" Spud

For RECESSED MOUNTING ComponentsASSEMBLED w/Flushvalve in 12" Frame,w/Integral Sensor in 14" S/S Cover.SEE Specification Drawing #17

For RECESSED MOUNTING ComponentsASSEMBLED w/Flushvalve in 12 x 18" Frame,w/Integral Sensor in 14 x 20" S/S Cover.SEE Specification Drawing #17

URINAL - Back Inlet (1)- 3/4" Spud- Syphon Jet Type

For RECESSED MOUNTING ComponentsASSEMBLED w/Flushvalve, 4" Box,w/Integral Sensor in S/S Cover.SEE Specification Drawing #17

✔ ✔ ✔

✔

DESCRIPTION PRODUCT NO.Electronic Activated Hardwire 1600T 6 0 RIFlushvalve Hardwire 1600T 6 0 TRElectronic Activated Battery 1601T 6 0 RIFlushvalve Battery 1601T 6 0 TR

Note: Rough-in and TrimOrdered Separately

1600T6104RI and1600T6104TR

Electronic Activated Flushvalve1600T and 1601T Series

Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.DSP–1600T6

Refer to www.specselect.com for individual models.Product supplied as shown by solid lines. All items shown by dotted lines supplied by others.

Note: Measurements may vary ± 6mm (0.25'')

1600T ELECTRONIC FLUSH VALVE OPTIONAL ACCESSORIES:

Approvals:• CSA certified • ADA Compliant and meets

Handicapped Accessibility Standard ASME A117.1 of less than 5 lbs. handle operating force.

• IAPMO listed• Complies to ASSE Standard 1037(Contact Delta Representative for State and/orLocal Approvals.)

W.C. OPERATION:• 8 second blocking time.• 4 second activation delay.• Adjustable flush volume using adjustment

screw on flushvalve.• Selectable sensing distance:

24 to 56" in 8" increments Factory set to 40"

• 24 hour courtesy flush factory set to off.

URINAL OPERATION:• 8 second blocking time.• 0 second activation delay.• Adjustable flush volume using adjustment

screw on flushvalve.• Selectable sensing distance:

12 to 28" in 4" incrementsFactory set to 20"

• Adjustable 24 hour courtesy flush factoryset to on.

1600T6103RIand

1600T6103TRTypical

Installation

1600T6403RIand

1600T6403TRTypical

Installation

✔ TRANSFORMERS:060704A 110 to 24VAC Class II 20VA (For 5 Sensor Modules)060771A 110 to 24VAC Class II 40VA (Up to 10 Sensor Modules)060772A 110 to 24VAC Class II 100VA (Up to 25 Sensor Modules)

✔ CORDS:060680A 4' Solenoid Extension Wire

✔ HARDWIRE CONVERTER:060683A 24VAC to 6VDC Converter (Supplied standard on Hardwire models)

305mm (12")Square Frame

Flushvalve

AccessBox Frame

356mm (14")SquareStainlessSteel Cover

Sensor

Seat

76mm (3")

of Sensor

Outlet PartsTubing, Elbow, Walland Spud Flange, Spud Nut, etc. Supplied as Requiredfor Fixture Specified.

F

Note:Recommended height to sensor

from top offixture is

20-22" with24" max.

Flushvalve

AccessBox Frame

305mm (12") Square Frame

of sensor


(Except For 3/4" and1 1/4" Top Inlet UrinalFixtures.)

76mm (3")

Sensor

279mm (11")

Electronic Washdown Urinal1600T and 1601T Series


(1) When used for TOP Inlet Urinal Fixture - Exposed Tubing, Flanges, Elbow, etc. SUPPLIED by Others. (2) 1600T9006 & 1601T9006 ordered as complete product only. No RI or TR available.Refer to www.specselect.com for individual models. Note: Use this page front and back, with specification drawing page referenced above, as product submittal sheets.

0 0 0


Model Specified:

Approval: Date:

Specification: (example)• Battery (4 ‘C’ cell) or Hardwire (24 VAC) infrared electronic

urinal flushing system• Stainless steel cover with integral sensor utilizing H2OPTICS

™ technologyand S/S vandal resistant mounting screws, metal mounting box

• Power function light, field selectable sensor range • Electronic manual override• Preset blocking time• Slow closing solenoid valve, integral stopand...with... (add control/sensor box required)with... (transformer - specify separately - See Back Page)

NOT APPLICABLE NOT APPLICABLE CONTROL/SENSOR BOX

2 22

1 11

3 33

5 55

7 77

9 99

4 44

6 66

8 88

For RECESSED MOUNTING - TOP INLETURINAL (1) Components ASSEMBLED in 8" Box, w/Integral Sensor in S/S Cover.SEE Specification Drawing #18

Components only UNASSEMBLED (1)4" Box w/Integral Sensor in S/S CoverSEE Specifications Drawing #19 (2)

✔ ✔ ✔

1600T9003RI and1600T9003TR

For RECESSED MOUNTING - BACKINLET URINAL Components ASSEMBLEDin 8" Box, w/Integral Sensor in S/S Cover,S/S Outlet Hose.SEE Specification Drawing #18

✔ ✔

DESCRIPTION PRODUCT NO.Electronic Washdown Hardwire 1600T 9 0 0 RIUrinal Hardwire 1600T 9 0 0 TRElectronic Washdown Battery 1601T 9 0 0 RIUrinal Battery 1601T 9 0 0 TR

Note: Rough-in and TrimOrdered Separately

Electronic Washdown Urinal1600T and 1601T Series


Refer to www.specselect.com for individual models.Product supplied as shown by solid lines. All items shown by dotted lines supplied by others.


Approvals:• CSA certified • ADA Compliant and meets

Handicapped Accessibility Standard ASME A117.1 of less than 5 lbs. handle operating force.

• IAPMO listed(Contact Delta Representative for State and/orLocal Approvals.)

OPERATION:• 8 second blocking time.• Activation delay:

0 seconds on urinal applications• Adjustable flush time 4 to 9 seconds

Factory set at 4 seconds• Selectable sensing distance:

12 to 28" in 4" increments. Factory set to 20"

• Adjustable 24 hour courtesy flushfactory set to on.

1600T9001RIand

1600T9001TRTypical

Installation

1600T9003RIand

1600T9003TRTypical

Installation

FLOWRATE vs PRESSURE

01

0

0

5

10

15

20

25

30

35

40

45

50

55

10 20 30 40 50 60 70 80 90 100Line Pressure (psig)

FLOW (l/min.)

FLOW (USGPM)

23456789101112131415

102mm (4")

25mm (1")

Inlet 1/2" copper

203 x 206 x 102mm(8" x 8 1/8" x 4")

control box

254 x 254mm(10" x 10")stainless steel cover plate

Infraredsensor

Centerlineof inlet

152mm(6")

Back inleturinal connection

outlet hose

1600T ELECTRONIC FLUSH VALVE OPTIONAL ACCESSORIES:

✔ TRANSFORMERS:060704A 110 to 24VAC Class II 20VA (For 5 Sensor Modules)060771A 110 to 24VAC Class II 40VA (Up to 10 Sensor Modules)060772A 110 to 24VAC Class II 100VA (Up to 25 Sensor Modules)

✔ CORDS:060680A 4' Solenoid Extension Wire

✔ HARDWIRE CONVERTER:060683A 24VAC to 6VDC Converter (Supplied standard on Hardwire models)

102mm (4")

Inlet 1/2" Copper

25mm (1")

254 x 254mm(10" x 10")

Stainless SteelCover Plate

Infrared Sensor

Outlet -3/8" MIP

Top InletUrinal Connection

(Shown dotted)BY OTHERS

152mm(6")

203 x 206 x 102mm(8" x 8-1/8" x 4")

Control Box

Specification Drawing #17


1600T and 1601T SERIES


✔ PRODUCT NO. VALVE TYPE MOUNT TYPE COVER

1600T 6 0 2 Flushvalve w/Access Panel Box Recessed Mount 356 x 508mm (14 x 20") Stainless Steel1600T 6 0 3 Flushvalve w/Access Panel Box Recessed Mount 356mm (14") Stainless Steel

*1600T 6 0 4 Flushvalve less Access Panel Box Recessed Mount 124mm (4-7/8") Stainless Steel1601T 6 0 2 Flushvalve w/Access Panel Box Recessed Mount 356 x 508mm (14 x 20") Stainless Steel1601T 6 0 3 Flushvalve w/Access Panel Box Recessed Mount 356mm (14") Stainless Steel

*1601T 6 0 4 Flushvalve less Access Panel Box Recessed Mount 124mm (4-7/8") Stainless Steel*This product is supplied with the Small Sensor Box. Note: Rough-in and Trim Ordered Separately

CONCEALED FLUSHVALVE INSTALLATION (RECESSED MOUNT)

Product supplied as shown by Solid Lines.All items shown by Dotted Lines Supplied by Others.SMALL SENSOR BOX SUPPLIED ONLY ON 1600T6_04 and 1601T6_04

Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability. DSP-1600T6A Page 7.C.3

305mm (12")Square Frame

Flushvalve

AccessBox Frame

356mm (14")SquareStainlessSteel Cover

Sensor


** 356MM (14") Square S/SCover and 305mm (12")Square Frame. SUPPLIEDONLY ON 1600T6_03 and1601T6_03

OR** 356 x 508MM (14 x 20") S/SCover and 305 x 457mm (12 x18") Frame. SUPPLIED ONLYON 1600T6_02 and 1601T6_02

WheelHandleStop

Flushvalve

121mm(4 3/4")

305mm(12") Square

305mm (12")SquareAccess

Box Frame

1" I.P. InletOutlet PartsTubing, Elbow,Wall and SpudFlange, SpudNut, etc. Supplied asRequired forFixture Specified.

Except for:3/4" and 1 1/4" TopInlet Urinal FixturesWhere ExposedTubing, Flanges,Elbow, etc.(Supplied by Others.)

206mm(8 1/8")

Inlet — 1/2"copper

Slow closingsolenoid valve

Aluminumcontrol box

Stainless steelbraided outlet

hose

Screwdriver stop

203mm(8")

102mm(4")

102mm (4")

25mm (1")

Inlet 1/2" copper

203 x 206 x 102mm(8" x 8 1/8" x 4")

control box

254 x 254mm(10" x 10")stainless steel cover plate

Infraredsensor

Back inleturinal connection

outlet hose

Connects to3/4" MaleI.P.S. Spud

206mm(8 1/8")

Inlet — 1/2"copper

Aluminumcontrol box

Outlet3/8" M.I.P.

Screwdriver stop

203mm(8")

102mm(4")

Slow closingsolenoid vavle

Water flow

Spacer(Replace withSOLENOIDvalve aftersystem isflushed.)

Coverassembly

NOTE:flow direction

ARROWon bottom

Slow closingsolenoid valve

(INSTALL: replacingspacer after system

is flushed.)

SOLENOID may beROTATED to ALLOW

for installation ofCOVER ASSEMBLY.

Water flow

(Note: Top inlet urinal connections not supplied)

C




1600T9001 and1601T9001

SERIES

1600T9003 and1601T9003

SERIES


✔ PRODUCT NO. VALVE TYPE MOUNT TYPE COVER

1600T 9 0 0 1 Back Inlet Urinal Recessed Mount 254mm (10") Stainless Steel1600T 9 0 0 3 Top Inlet Urinal Recessed Mount 254mm (10") Stainless Steel1601T 9 0 0 1 Back Inlet Urinal Recessed Mount 254mm (10") Stainless Steel1601T 9 0 0 3 Top Inlet Urinal Recessed Mount 254mm (10") Stainless Steel

Note: Rough-in and Trim Ordered Separately

URINAL VALVE ASSEMBLED CONTROL BOX (RECESSED MOUNT)


1600T9006 and1601T9006

SERIES

COMPONENTS ONLY UNASSEMBLED1600T and 1601T SERIES

✔ PRODUCT NO. FAUCET TYPE COVER

1600T 9 0 0 6 Urinal Valve 124mm (4-7/8") Stainless Steel1601T 9 0 0 6 Urinal Valve 124mm (4-7/8") Stainless Steel

Note: Ordered as complete product only. No RI or TR available.


Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.DSP-1600T9A

Exposed TECK® Flush Valve


Refer to www.specselect.com for individual models. Note: Use this page as a product submittal sheet.


Model Specified:

Approval: Date:


Specification: (example)(FOR 1-1/2'' TOP INLET CLOSET FIXTURE)• Quiet action, TECK® exposed diaphragm flush valve• Chloramine resistant diaphragm• Forged brass diaphragm retainer• Renewable seat• Polished chrome plated finish• External water conserving flush volume adjustment,

(except -6 and -56 models) factory set at 60 PSI to 6 litre (1.6 US gal.)• Vandal resistant cover screw• Metal “non hold open” handle• 1" FIP/copper sweat inlet adaptor angle check stop with

protecting cap• Adjustable 121mm (4-3/4'') plus or minus 11mm (7/16'') inlet/valve

outlet centers• Vacuum breaker• Cover tube and wall flange, spud flange and concealed spud nut

WITH 292mm (11-1/2'') LENGTH:❏ 81T201

As above❏ 81T201-1

Same as 81T201, but with trap seal primer tee❏ 81T201-5

Same as 81T201, but with center cover bumper❏ 81T201-6

Same as 81T201, but Not Field Adjustable❏ 81T201-56

Same as 81T201-5, but Not Field Adjustable

With 610mm (24'') LENGTH❏ 81T221


Same as 81T221 but with trap seal primer tee❏ 81T221-6

Same as 81T221, but Not Field Adjustable

Approvals:• CSA certified• Complies to ASSE 1037• ADA compliant and meets

Handicapped Accessibility Standard ASME A117.1 of lessthan 5 lbs. operating force.

• IAPMO Listed(Contact Delta Representative for Stateand/or Local Approvals.)

81T201

121mm (4.75”)

54mm(2.13”) MIN.

292mm (11.5”) for 81T201610mm (24”) for 81T221

Note: The recommended Flush Valve operatingpressure range is between 35 and 65 psi.See page 7.C.18 High Water Pressure notefor more details.

-1 OPTION TRAP SEAL PRIMER TEEDETERGENT/DISINFECTANT

3/8" O.D. Copper Tube(NOT SUPPLIED)

TO TRAPSEAL

Exposed TECK® Flush Valvesfor Sloan®/Zurn® Stops




Model Specified:

Approval: Date:


Specification: (example)(FOR 1-1/2'' TOP INLET CLOSET FIXTURE)LESS STOP, WITH MODIFIED TAIL TO FIT SLOAN®/ZURN® STOP• Quiet action, TECK® exposed diaphragm flush valve• Chloramine resistant diaphragm• Forged brass diaphragm retainer• Renewable seat• Polished chrome plated finish• External water conserving flush volume adjustment,

factory set at 60 PSI to 6 litre (1.6 US gal.) (except -6 model)• Vandal resistant cover screw• Metal “non hold open” handle• Adjustable 114mm (4.5'') to131mm (5.18'') inlet/valve outlet centers• Vacuum breaker• Spud flange and concealed spud nut

WITH 292mm (11-1/2'') LENGTH:❏ 81T201-30

As above❏ 81T201-30-6

Same as 81T201-30, but Not Field Adjustable




81T201-30

114mm (4.5")to

131mm (5.18")

54mm(2.13”) MIN.

292mm (11.5")


Items shown outlined bydotted lines supplied by others.

Exposed TECK® Flush Valves




Model Specified:

Approval: Date:





Specification: (example)(FOR TOP INLET URINAL FIXTURE)• Quiet action, TECK® exposed diaphragm flush valve• Chloramine resistant diaphragm• Forged brass diaphragm retainer• Renewable seat• Polished chrome plated finish• External water conserving flush volume adjustment,

factory set at 60 PSI to 2.7 litre (.70 US gal.)• Vandal resistant cover screw• Metal “non hold open” handle• 1'' FIP/3/4'' copper sweat inlet adaptor angle check

stop with protecting cap• Adjustable 121mm (4-3/4'') plus or minus 11mm (7/16'')

inlet/valve outlet centers• Vacuum breaker• Cover tube and wall flange, spud flange and spud nut

FOR 3/4'' TOP INLET URINAL FIXTURE❏ 81T231


Same as 81T231 but with trap seal primer tee

FOR 1-1/4'' TOP INLET URINAL FIXTURE(with 1'' copper inlet adaptor)❏ 81T291


Same as 81T291 but with trap seal primer tee

OPTIONS AVAILABLE (for Field Conversion):❏ 060253A

3/4" x 19-1/2" VB Tube (for 81T231)

292mm (11.5'') for 81T291330mm (13'') for 81T231

121mm (4.75”)

54mm(2.13”) MIN.



TO TRAPSEAL

Note: The recommended Flush Valve operating pressure range is between 35 and 65 psi.See page 7.C.18 High Water Pressure note for more details.

81T231

Exposed Teck® Flush Valvesfor Sloan®/Zurn® Stops




Model Specified:

Approval: Date:





Specification: (example)(FOR TOP INLET URINAL FIXTURE)LESS STOP, WITH MODIFIED TAIL TO FIT SLOAN®/ZURN® STOP• Quiet action, TECK® exposed diaphragm flush valve• Chloramine resistant diaphragm• Forged brass diaphragm retainer• Renewable seat• Polished chrome plated finish• External water conserving flush volume adjustment,

factory set at 60 PSI to 2.7 litre (.70 US gal.) • Vandal resistant cover screw• Metal “non hold open” handle• Adjustable 114mm (4.5'') to131mm (5.18'') inlet/valve outlet centers• Vacuum breaker• Spud flange and spud nut

FOR 3/4'' TOP INLET URINAL FIXTURE❏ 81T231-30

As above

OPTIONS AVAILABLE (for Field Conversion):❏ 060253A

3/4" x 19-1/2" VB Tube (for 81T231 Series)

330mm (13'')

114mm (4.5")to

131mm (5.18")

54mm(2.13”) MIN.

Note: The recommended Flush Valve operating pressure range is between 35 and 65 psi.See page 7.C.18 High Water Pressure note for more details.

81T231-30

Items shown outlined bydotted lines supplied by others.





Model Specified:

Approval: Date:





Specification: (example)(FOR 1-1/2" TOP INLET CLOSET FIXTURE)• Quiet action, TECK® exposed diaphragm flush valve• Chloramine resistant diaphragm• Forged brass diaphragm retainer• Renewable seat• Polished chrome plated finish• External water conserving flush volume adjustment,

(except -6 models) factory set at 60 PSI to 6 litre (1.6 US gal.)• Vandal resistant cover screw• Metal “non hold open” handle• 1'' FIP/copper sweat inlet adaptor angle check stop with

protecting cap• Adjustable 121mm (4-3/4'') plus or minus 11mm (7/16'')

inlet/valve outlet centers• Vacuum breaker• Cover tube and wall flange, spud flange and concealed spud nut

WITH 610mm (24") “A” LENGTH AND38mm (1-1/2" offset)❏ 81T261


Same as 81T261, but Not Field Adjustable

81T261

Note: The recommended Flush Valve operatingpressure range is between 35 and 65 psi.See page 7.C.18 High Water Pressurenote for more details.

121mm (4.75")

54mm(2.13") MIN.

640mm(25.18")

38mm(1.5")





Model Specified:

Approval: Date:





Specification: (example)(FOR 1-1/2" BACK INLET CLOSET FIXTURE)• Quiet action, TECK® exposed diaphragm flush valve• Chloramine resistant diaphragm• Forged brass diaphragm retainer• Renewable seat• Polished chrome plated finish• External water conserving flush volume adjustment,

(except -6 models) factory set at 60 PSI to 6 litre (1.6 US gal.)• Vandal resistant cover screw• Metal “non hold open” handle• 1'' FIP/copper sweat inlet adaptor angle check stop with

protecting cap• Adjustable 121mm (4-3/4'') plus or minus 11mm (7/16'') inlet/valve

outlet centers• Vacuum breaker• Cover tube and wall flange, spud flange and concealed spud nut

❏ 81T271As above

❏ 81T271-1Same as 81T271 but with trap seal primer tee

❏ 81T271-5Same as 81T271 but with center cover bumper

❏ 81T271-6Same as 81T271, but Not Field Adjustable

81T271



TO TRAPSEAL


121mm (4.75")

54mm(2.13") MIN.

381mm (15")

156mm(6.13")

Concealed TECK® Flush Valve


MORE STANDARD FEATURES• DIAPHRAGM Type• Choramine Resistant Diaphragm• Forged Brass Diaphragm Retainer• QUIET Action• CONSTANT Peak Flow• Marine/Ship Use• ADA Compliant Lever Handle

• STANDARD VALVE INSTALLS on allwalls zero to 343mm (13-1/2'')thick. (WALL THICKNESS does nothave to be specified)

• VANDAL RESISTANT Handle Actuators

• Choice of 3 Handle Actuators

• INSTALLATION FLEXIBILITY:Handle Control can be installed up to6m (20') away from the valve body.

• ”NON HOLD OPEN”Handle (1)

• ADJUSTABLE Tail

• ”PRESSURE LOSS Check” Stop-1'' FIP Inlet (1)

• 1'' Copper Sweat ADAPTOR

• 9.5mm (3/8'') dia. FLEXIBLECopper Tubes. (COLORCODED for quick, easyinstallation.)

• External VolumeADJUSTMENT (1)(except - 6 models)

• RenewableSEAT

• HIGHEST QUALITYVacuum breaker.

(1) WATER CONSERVATION FEATURES

83T141


Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.

3 HANDLE ACTUATORS AVAILABLE• 16mm (5/8'') DIA. PUSH BUTTON• OSCILLATING Lever Handle • 35mm (1-3/8'') Dia. PUSH BUTTON


… The Teck® Concealed Flush Valve is characterized for it’s FLEXIBILITY.

• It can be installed for back access or with a stainless steel panel forfront access, reducing space for piping, etc.

• Flush valves are supplied to fit any wall from zero to 343mm(13-1/2'') thick. (Note: Wall thickness does NOT have to be specified.)

• The flush valve could also be installed inside a 6" wall cavity if required.

• Each of the 3 handle actuator choices allows positioning of theHandle Control unit for a variety of desired positions. The handle can be positioned up to 6m (20’) from the valve.

• Handle control tubes are flexible, color coded, copper tubes forquick, easy and proper installation.

• The handle wall flange is supplied with a stainless steel anti-rotationlocking pin for vandal resistance

• A heavy gauge, plated metal wall bracket and two locknuts aresupplied to insure a rigid handle control installation.

STANDARD TECK® features:

WATER CONSERVATION FEATURES:• External Volume Adjustment* • “Pressure Loss Check” Stop*Except - 6 Models

• “Non-Hold Open” Actuators(ALSO Vandal Resistant)

ADDITIONAL FEATURES:• Adjustable Tail • Heavy Duty• CSA Certified • Marine/Ship Use• Constant Peak Flow • Renewable Seat• Copper Sweat Inlet Adaptor - 1'' • Quiet Action

(3/4'' on Urinal Valves) • Vacuum Breaker• Vandal Resistant • ADA Compliant• Diaphragm Type Valve Lever Handle • Chloramine Resistant Diaphragm• Forged Brass Diaphragm Retainer

See page 7.C.18 for explanation of how the TECK® flush valveoperates.

ACCESS PANEL

Specifications: (example)❏ 9T400 Access Panel

305mm (12'') square frame with 365mm (14'') square stainlesssteel cover and vandal resistant stainless steel screws.

Concealed TECK® Flush Valves




Model Specified:

Approval: Date:


Approvals:• CSA certified• Complies to ASSE 1037• Oscillating Lever Handle ADA compliant and

meets Handicapped Accessibility Standard ASME A117.1 of less than 5 lbs. operatingforce.

• IAPMO Listed(Contact Delta Representative for State and/orLocal Approvals.)

Specification: (example)(FOR 1-1/2'' WALL HUNG BACK INLET CLOSET FIXTURE)• Quiet action, TECK® concealed diaphragm flush valve• Chloramine resistant diaphragm• Forged brass diaphragm retainer• Renewable seat• External water conserving flush volume adjustment,

(except -6 models) factory set at 60 PSI to 6 litre (1.6 US gal.)• “Non hold open” metal handle actuator• Vandal resistant handle control can easily be located and installed

anywhere within 6m (20') of flush valve• Standard flush valve will install on all walls zero to 343mm

(13-1/2'') thick• 1'' FIP/copper sweat inlet adaptor

wheel handle angle check stop• Adjustable 121mm (4-3/4'') plus or

minus 11mm (7/16'') inlet/valve outlet centers

• Vacuum breaker❏ 83T140

with 16mm (5/8'') dia. push button❏ 83T141

with oscillating handle❏ 83T143

with 35mm (1-3/8'') dia. push button

(FOR BACK INLET PRISON FIXTURE)❏ 83T000

Same as 83T140 with 16mm (5/8'') dia. push button BUT with 1-1/2'' MIP on outlet tube for Prison Fixture installation

OPTIONS: Add dash number to end product required above.)

-1 Trap seal primer tee-6 Factory set 6 litre (1.6 US gal.) flush

Not Field Adjustable

83T000

83T141OPTIONAL HANDLELOCATION #1

83T141OPTIONAL HANDLELOCATION #2

610mm (24”)

121mm(4.75”)

254mm(10”)

292mm(11.5”)

121mm (4.75”)

102mm(4”)

318mm(12.5”)

292mm(11.5”)

0 - 343mm (0-13.5”)

365mm(14.5”)

254mm(10”)

0-343mm(0-13.5”)

610mm(24”)

#2

#1



TO TRAPSEAL

Note: The recommended Flush Valve operating pressure range isbetween 35 and 65 psi. See page 7.C.18 High WaterPressure note for more details.

83T141





Model Specified:

Approval: Date:



• IAPMO Listed(Contact Delta Representative for State and/orLocal Approvals.)


Specification: (example)(FOR 1-1/2'' FREE-STANDING, BACK INLET CLOSET FIXTURE)• Quiet action, TECK® concealed diaphragm flush valve• Chloramine resistant diaphragm• Forged brass diaphragm retainer• Renewable seat• External water conserving flush volume adjustment,

(except -6 models) factory set at 60 PSI to 6 litre (1.6 US gal.)• Metal “non hold open” handle actuator• Vandal resistant handle control can easily be located and installed


(13-1/2'') thick• 1'' FIP/copper sweat inlet adaptor wheel handle angle check

stop• Adjustable 121mm (4-3/4'') plus or minus 11mm (7/16'') inlet/valve

outlet centers• Vacuum breaker• Wall and spud flanges, concealed sput nut

❏ 83T240with 16mm (5/8'') dia. push button

❏ 83T241 with oscillating handle

❏ 83T243with 35mm (1-3/8'') dia. push button

OPTIONS: (Add dash number to end product required above.)-1 Trap seal primer tee.-6 Factory set 6 litre

(1.6 US gal.) flushNot Field Adjustable

Note: The recommended Flush Valve operating pressure range isbetween 35 and 65 psi. See page 7.C.18 High WaterPressure note for more details.

83T241



TO TRAPSEAL

292mm(11.5")

254mm(10") 121mm

(4.75")

610mm (24")

OPTIONAL HANDLELOCATION #2


0-343mm (0-13.5")

318mm (12.5")292mm(11.5")

610mm (24")

102mm(4")

121mm (4.75")

#1

#2





Model Specified:

Approval: Date:




• IAPMO Listed(Contact Delta Representative for State and/or Local Approvals.) 0-343mm (0-13.5")

Specification: (example)(FOR 1-1/2'' TOP INLET CLOSET FIXTURE)• Quiet action, TECK® concealed diaphragm flush valve• Chloramine resistant diaphragm• Forged brass diaphragm retainer• Renewable seat• External water conserving flush volume adjustment,

(except -6 models) factory set at 60 PSI to 6 litre (1.6 US gal.)• Metal “non hold open” handle actuator• Vandal resistant handle control can easily be located and installed


(13-1/2'') thick• 1'' FIP/copper sweat inlet adaptor wheel handle angle check

stop• Adjustable 121mm (4-3/4'') plus or minus 11mm (7/16'') inlet/valve

outlet centers• Vacuum breaker• Wall and spud flanges, concealed sput nut, elbow and tubing


❏ 83T341 with oscillating handle

❏ 83T343with 35mm (1-3/8'') dia. push button

OPTIONS: (Add dash number to end product required above.)-1 Trap seal primer tee.-6 Factory set 6 litre

(1.6 US gal.) flushNot Field Adjustable


83T341



TO TRAPSEAL

292mm(11.5")

254mm(10")

121mm(4.75")

610mm (24")



127mm (5.0")

292mm(11.5")

610mm (24")

102mm(4")

121mm (4.75")

#1

#2318mm (12.5")





Model Specified:

Approval: Date:


meets Handicapped Accessibility Standard ASME A117.1 of less than 5 lbs. operating force.

• IAPMO Listed(Contact Delta Representative for State and/or Local Approvals.)


Specification: (example)(FOR WALL HUNG, BACK INLET URINAL FIXTURE)• Quiet action, TECK® concealed diaphragm flush valve• Chloramine resistant diaphragm• Forged brass diaphragm retainer• Renewable seat• External water conserving flush volume adjustment,

factory set at 60 PSI to 2.7 litre (.70 US gal.)• Metal “non hold open” handle actuator• Vandal resistant handle control can easily be located and

installed anywhere within 6m (20') of flush valve• Standard flush valve will install on all walls zero to 343mm

(13-1/2'') thick• 1'' FIP/copper sweat inlet adaptor wheel handle angle

check stop• Adjustable 121mm (4-3/4'') plus or minus 11mm (7/16'')

inlet/valve outlet centers• Vacuum breaker

FOR 3/4" WALL HUNG, BACK INLETURINAL FIXTURE: (with 3/4" copper sweat adaptor)


❏ 83T431with oscillating handle

FOR 1-1/4" WALL HUNG, BACK INLETURINAL FIXTURE: (with 1" copper sweat adaptor)


❏ 83T491with oscillating handle

OPTIONS: (Add dash number to end product required above.)-1 Trap seal primer tee


83T431



TO TRAPSEAL

0-343mm (0-13.5")

292mm(11.5")

102mm(4")

121mm (4.75")

318mm (12.5")

Metering Urinal Valvefor Washdown Urinals


Refer to www.specselect.com for individual models. Note: Use this page front and back as a product submittal sheet.


Model Specified:

Approval: Date:

SPECIFICATION: (example)• HEAVY-DUTY, back inlet supply• CAST BRASS valve for 3/4'' IP spud urinal• Polished chrome plated finish• Delta® metering slow close cartridge• Chrome plated union inlet stop• Brass oscillating lever handle, coupling nuts, inlet cover tube• Set screw wall flange, spud flange, outlet tube • 1/2'' universal FIP/copper sweat inlet

For Washdown Urinals❏ 86T505

SPECIFICATION: (example)• HEAVY-DUTY, back inlet supply• CAST BRASS valve for 3/4'' IP spud urinal• Polished chrome plated finish• Delta® metering slow close cartridge• Chrome plated brass coupling nuts, inlet cover tube• Wall flange, spud flange, outlet tube• 1/2'' universal FIP/copper sweat inlet


with vandal resistant brass push button❏ 86T502

with brass oscillating lever handle

SPECIFICATION: (example)• HEAVY-DUTY, top inlet supply• CAST BRASS valve for 3/4'' IP spud urinal• Polished chrome plated finish• Delta® metering slow close cartridge• Chrome plated brass coupling nuts, spud flange, outlet tube • 1/2'' universal FIP/copper sweat inlet


with vandal resistant brass push button❏ 86T503

with brass oscillating lever handle

SPECIFICATION: (example)Vacuum breaker assembly for above urinal valves❏ 86T610

86T505

86T500

86T503

86T610

Metering Urinal Valvefor Washdown Urinals


Refer to www.specselect.com for individual models. Note: Use this page front and back as a product submittal sheet.

Approvals:• CSA certified• Lever Handle ADA

Compliant and meets Handicapped Accessibility Standard ASME A117.1 of less than 5 lbs. operating force.

• IAPMO listed(Contact Delta Representative for State and/orLocal Approvals.)

FLOWRATE vs PRESSURE

86T505

86T505 with 86T61000

0

15

10 20 30 40 50 60 70 80 90 100

FLOW (l /min.)

FLOW (USGPM)

2

3

4

5

10

15

20

Line Pressure (psig)

INLETS - 1/2'' FIP/CopperNote: Measurements may vary ± 6mm (0.25'')

Extensions Available for Inlet Centersand for Outlet Tube Heights

121mm(4.75”)

TOP OF FIXTURE

292mm(11.5”)

1/2” FIP/COPPER

SWEAT INLET

121mm(4.75”)

TOP OF FIXTURE

324mm(12.75”)

1/2” FIP/COPPER

SWEAT INLET

OF FIXTURE

57mm(2.25")

Electronic Exposed TECK® Flush Valves


❏ 81T201BT – Exposed Battery Operated 1-1/2'' Top Inlet Closet Fixture

• Polished chrome plated vandal resistant metal cover with top mounted sensor operated electronics

• Right or left-hand supply installation• ADA compliant, automatic operation battery powered infrared sensor• Scratch resistant lens window• Four (4) size AA alkaline batteries factory installed with valve in sleep

mode for easy installation• Low battery flashing light (5000 flushes remaining)• Infrared sensor range adjustment of 610mm-1067mm (24" - 42"),

factory set at 36” (±2")• Optional 24 hour automatic flush factory set to off, 3 second flush delay• Set-up sensor range adjustment indicator light, solid state electronics• 6 VDC input, 5 second arming delay, 8° upward beam• Electronic operated non-hold-open metal manual override button

with 5 second lockout• Quiet action, Teck® exposed diaphragm flush valve• Chloramine resistant diaphragm• Forged brass diaphragm retainer• Renewable seat• Polished chrome plated finish• External water conserving flush adjustment,

factory set at 60 PSI to 6 litre (1.6 US gal.) (except -6 model)• 1" FIP/Copper sweat inlet adaptor, angle check stop with

protecting cap• Adjustable 121mm (4-3/4") plus or minus 11mm (7/16") inlet/valve

outlet centers• Vacuum breaker• Cover tube, stainless steel wall flange, spud flange, concealed spud nut,

and 292mm (11-1/2") outlet tube.

❏ 81T201-6BTSame as 81T201BT,but Not Field Adjustable

❏ 81T221BTSame as 81T201BT,but with 610 mm (24”) outlet tube

❏ 81T201-20BTSame as 81T201BT, but LESS stop, cover tube and wall flange.

❏ 81T201-20-13BTSame as 81T201-20BT, but external waterconserving flush adjustment factory set at 60 PSIto 13 litre (3.4 US gal.)

❏ 81T201-20-6BTSame as 81T201-6BT, but LESS stop, cover tube andwall flange, Not Field Adjustable.

Electronic Exposed TECK® IIFlush Valve Retrofit Kits


Model Specified:

Approval: Date:

81T201BT

Note: Measurements may vary ± 6mm (0.25'')Note: The recommended Flush Valve operating pressure range is between35 and 65 psi. See page 7.C.18 High Water Pressure note for more details.

Approvals:• CSA certified• Complies to ASSE 1037• ADA Compliant and meets Handicapped

Accessibility Standard ASME A117.1 ofless than 5 lbs. operating force.

• IAPMO listed(Contact Delta Representative for Stateand/or Local Approvals.)U.S. Patent # 6, 826, 455

81T201BT121mm ±13mm

(4.75" ±.44")

71mm(2.81")

76mm(3.0")

VACUUMBREAKER

TUBE

38mm(1.5")

38mm (1.5")SLIP JOINT NUT

& WASHERS

SUPPLIED

137mm(5.4")

292 mm (11.5”)for 81T201BT

610 mm (24”) for 81T221BT

54mm(2.13") MIN.

FINISHED WALL

TOP OF FIXTURE

INLET:

25mm (1.0")FIP OR

COPPERSWEAT

W/ADAPTOR(SUPPLIED)


Electronic Exposed TECK® Flush Valvesfor Sloan®/Zurn® Stops

Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.DSP–81T201BT


81T201-30BT114mm (4.5")

to131mm (5.18")

76mm(3.0")

VACUUMBREAKER

TUBE

38mm(1.5")


& WASHERS

SUPPLIED

137mm(5.4")

292mm(11.5")

54mm(2.13") MIN.

FINISHED WALL

TOP OF FIXTURE


Model Specified:

Approval: Date:

81T201-30BT





❏ 81T201-30BT – Exposed Battery Operated 1-1/2'' Top Inlet Closet FixtureLESS STOP, WITH MODIFIED TAIL TO FIT SLOAN®/ZURN® STOP


• Right or left-hand supply installation• ADA compliant, automatic operation battery powered infrared sensor• Scratch resistant lens window• Four (4) size AA alkaline batteries factory installed with valve in sleep


factory set at 36” (±2”)• Optional 24 hour automatic flush factory set to off, 3 second flush delay• Set-up sensor range adjustment indicator light, solid state electronics• 6 VDC input, 5 second arming delay, 8° upward beam• Electronic operated non-hold-open metal manual override button


factory set at 60 PSI to 6 litre (1.6 US gal.) (except -6 model)• Adjustable 114mm to 131mm (4.5" to 5.18") inlet/valve outlet centers• Vacuum breaker• Spud flange, concealed spud nut, and 292mm (11-1/2") outlet tube.

❏ 81T201-30-13BTSame as 81T201-30BT, but external waterconserving flush adjustment factory set at 60 PSIto 13 litre (3.4 US gal.)

❏ 81T201-30-6BTSame as 81T201-30BT,but Not Field Adjustable

Items shown outlined by dottedlines supplied by others.

Electronic ExposedTECK® Flush Valves




Model Specified:

Approval: Date:

81T201HW





060704A 110 to 24VAC Class II 20VA(for up to 10 Electronic Valves)

060771A 110 to 24VAC Class II 40VA(up to 20 Electronic Valves)


✔ TRANSFORMERS:

81T201HW

Junction Box 51 x 102mm (2" x 4")

Stainless Steel Coverplate

FINISHEDWALL

121mm ±13mm(4.75" ±.44")

71mm(2.81")

76mm(3.0")

VACUUMBREAKER

TUBE

38mm(1.5")


& WASHERS

SUPPLIED

137mm(5.4")

292 mm (11.5”)for 81T201HW

610 mm (24”) for 81T221HW

54mm(2.13") MIN.

TOP OF FIXTURE

INLET:

25mm (1.0")FIP OR

COPPERSWEAT

W/ADAPTOR(SUPPLIED)

❏ 81T201HW – Exposed Hard Wire Operated 1-1/2'' Top Inlet Closet Fixture


• Right or left-hand supply installation• ADA compliant, automatic operation hard wire powered infrared sensor• Scratch resistant lens window• Infrared sensor range adjustment of 610mm-1067mm (24" - 42"),

factory set at 36” (±2")• Hardwire adaptor• Vandal resistant copper tube conduit• Optional 24 hour automatic flush factory set to off, 3 second flush delay• Set-up sensor range adjustment indicator light, solid state electronics• 24 VAC input, 5 second arming delay, 8° upward beam • Electronic operated non-hold-open metal manual override button

with 5 second lockout• (110 to 24 VAC Transformer not included. See selection below for

additional part number.)• Quiet action, Teck® exposed diaphragm flush valve• Chloramine resistant diaphragm• Forged brass diaphragm retainer• Renewable seat• Polished chrome plated finish• External water conserving flush adjustment,

factory set at 60 PSI to 6 litre (1.6 US gal.) (except -6 model)• 1" FIP/Copper sweat inlet adaptor, angle check stop with

protecting cap• Adjustable 121mm (4-3/4") plus or minus 11mm (7/16") inlet/valve

outlet centers• Vacuum breaker• Cover tube, stainless steel wall flange, spud flange, concealed spud nut,

and 292mm (11-1/2") outlet tube

❏ 81T201-6HWSame as 81T201HW,but Not Field Adjustable

❏ 81T221HWSame as 81T201HW,but with 610 mm (24”) outlet tube.

• (110 to 24 VAC Transformer not included. See selection below for additional part number.)

❏ 81T201-20HWSame as 81T201HW, but LESS stop, cover tube and wall flange.

❏ 81T201-20-13HWSame as 81T201-20HW, but external waterconserving flush adjustment factory set at 60 PSIto 13 litre (3.4 US gal.)

❏ 81T201-20-6HWSame as 81T201-6HW, but LESS stop, cover tube andwall flange, Not Field Adjustable


Electronic Exposed TECK® FlushValves for Sloan®/Zurn® Stops

Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.DSP–81T201HW Rev. A



Model Specified:

Approval: Date:

81T201-30HW








✔ TRANSFORMERS:

❏ 81T201-30HW – Exposed Hard Wire Operated 1-1/2'' Top Inlet Closet FixtureLESS STOP, WITH MODIFIED TAIL TO FIT SLOAN®/ZURN® STOP


• Right or left-hand supply installation• ADA compliant, automatic operation hard wire powered infrared sensor• Scratch resistant lens window• Infrared sensor range adjustment of 610mm-1067mm (24" - 42"),

factory set at 36” (±2”)• Hardwire adaptor• Vandal resistant copper tube conduit• Optional 24 hour automatic flush factory set to off, 3 second flush delay• Set-up sensor range adjustment indicator light, solid state electronics• 24 VAC input, 5 second arming delay, 8° upward beam • Electronic operated non-hold-open metal manual override button with

5 second lockout• (110 to 24 VAC Transformer not included. See selection below for


factory set at 60 PSI to 6 litre (1.6 US gal.) (except -6 model)• Adjustable 114mm to 131mm (4.5" to 5.18") inlet/valve outlet centers• Vacuum breaker• Spud flange, concealed spud nut, and 292mm (11-1/2") outlet tube

❏ 81T201-30-13HWSame as 81T201-30HW, but external waterconserving flush adjustment factory set at 60 PSIto 13 litre (3.4 US gal.)

❏ 81T201-30-6HWSame as 81T201-30HW,but Not Field Adjustable

• (110 to 24 VAC Transformer not included. See selection below for additional part number.)

81T201-30HW



FINISHEDWALL

114mm (4.5")to

131mm (5.18")

76mm(3.0")

VACUUMBREAKER

TUBE

38mm(1.5")


& WASHERS

SUPPLIED

137mm(5.4")

292mm(11.5")

54mm(2.13") MIN.

TOP OF FIXTURE

Items shown by dotted linessupplied by others.

Electronic Exposed TECK® Flush Valves


❏ 81T201-WMSBT – Exposed Battery Operated 1-1/2'' Top Inlet Closet Fixture

• Polished chrome plated vandal resistant metal cover with 4" wallmount sensor• Right or left-hand supply installation• ADA compliant, automatic operation battery powered H2OPTICS

™ technologyinfrared sensor

• Four (4) ‘C’ cell batteries • Low battery level indicator (5000 flushes remaining)• Infrared sensor range adjustment of 610mm-1422mm (24" - 56") in 8" increments,

factory set at 40” (±2")• Vandal resistant copper tube conduit• 24 hour courtesy flush factory set to off• 6 VDC input• Electronic manual override button• Quiet action, Teck® exposed diaphragm flush valve• Chloramine resistant diaphragm• Forged brass diaphragm retainer• Renewable seat• Polished chrome plated finish• External water conserving flush adjustment, factory set at 60 PSI

to 6 litre (1.6 US gal.) (except -6 model)• 1" FIP/Copper sweat inlet adaptor, angle check stop with protecting cap• Adjustable 121mm (4-3/4") plus or minus 11mm (7/16") inlet/valve outlet centers• Vacuum breaker• Cover tube, stainless steel wall flange, spud flange, concealed spud nut, and

292mm (11-1/2") outlet tube.

❏ 81T201-6-WMSBTSame as 81T201-WMSBT,but Not Field Adjustable

124mm(4 1/2")

124mm(4 1/2")

* 76mm(3")

to topof open

seat cover



Sensor Box 102 x 102 x 102mm (4" x 4" x 4")


Model Specified:

Approval: Date:

81T201-WMSBT




• IAPMO listed(Contact Delta Representative for Stateand/or Local Approvals.)

81T201-WMSBT

121mm ±13mm(4.75" ±.44")

71mm(2.81")

76mm(3.0")

VACUUMBREAKER

TUBE

38mm(1.5")


& WASHERS

SUPPLIED

124mm(4.875")

292 mm (11.5”)

54mm(2.13") MIN.

FINISHED WALL

TOP OF FIXTURE

INLET:

25mm (1.0")FIP OR

COPPERSWEAT

W/ADAPTOR(SUPPLIED)


* Note:Recommended

height to sensorfrom top of

fixture is20-22" with24" MAX.


Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.DSP–81T201-WMS


124mm(4 1/2")

124mm(4 1/2")

* 76mm(3")

to topof open

seat cover





Model Specified:

Approval: Date:

81T201-WMSHW





060704A 110 to 24VAC Class II 20VA(for up to 5 Sensor Modules)

060771A 110 to 24VAC Class II 40VA(up to 10 Sensor Modules)


✔ TRANSFORMERS:

81T201-WMSHW

❏ 81T201-WMSHW – Exposed Hard Wire Operated 1-1/2'' Top Inlet Closet Fixture

• Polished chrome plated vandal resistant metal cover with 4" wallmount sensor

• Right or left-hand supply installation• ADA compliant, automatic operation hard wire powered H2OPTICS


• Infrared sensor range adjustment of 610mm-1422mm (24" - 56"), in 8" increments, factory set at 40” (±2")

• Hardwire adaptor• Vandal resistant copper tube conduit• 24 hour courtesy flush factory set to off• 24 VAC input • Electronic manual override button • (110 to 24 VAC Transformer not included. See selection below for additional

part number.)• Quiet action, Teck® exposed diaphragm flush valve• Chloramine resistant diaphragm• Forged brass diaphragm retainer• Renewable seat• Polished chrome plated finish• External water conserving flush adjustment,

factory set at 60 PSI to 6 litre (1.6 US gal.) (except -6 model)• 1" FIP/Copper sweat inlet adaptor, angle check stop with protecting cap• Adjustable 121mm (4-3/4") plus or minus 11mm (7/16") inlet/valve outlet centers• Vacuum breaker• Cover tube, stainless steel wall flange, spud flange, concealed spud nut, and 292mm

(11-1/2") outlet tube

❏ 81T201-6-WMSHWSame as 81T201-WMSHW,but Not Field Adjustable

121mm ±13mm(4.75" ±.44")

71mm(2.81")

76mm(3.0")

VACUUMBREAKER

TUBE

38mm(1.5")


& WASHERS

SUPPLIED

124mm(4.875")

292 mm (11.5”)

54mm(2.13") MIN.

FINISHED WALL

TOP OF FIXTURE

INLET:

25mm (1.0")FIP OR

COPPERSWEAT

W/ADAPTOR(SUPPLIED)

* Note:Recommended

height to sensorfrom top of

fixture is20-22" with24" MAX.






Model Specified:

Approval: Date:

81T231BT

Note: The recommended Flush Valve operating pressure range is between35 and 65 psi. See page 7.C.18 High Water Pressure note for more details.




❏ 81T231BT – Exposed Battery Operated 3/4'' Top Inlet Urinal Fixture


• Right or left-hand supply installation• ADA compliant, automatic operation battery powered

infrared sensor• Scratch resistant lens window• Four (4) size AA alkaline batteries factory installed with valve in

sleep mode for easy installation• Low battery flashing light (5000 flushes remaining)• Infrared sensor range adjustment of 457mm-914mm (18" - 36"),

factory set at 24” (±2”)• Optional 24 hour automatic flush factory set to on• Set-up sensor range adjustment indicator light, solid state electronics• 6 VDC input, 5 second arming delay, 8° downward beam • Electronic operated non-hold-open metal manual override button

with 5 second lockout• Quiet action, TECK® exposed diaphragm flush valve• Chloramine resistant diaphragm• Forged brass diaphragm retainer• Renewable seat• Polished chrome plated finish• External water conserving flush adjustment,

factory set at 60 PSI to 2.7 litre (.70 US gal.) • 1" FIP / 3/4" copper sweat inlet adaptor, angle check stop

with protecting cap• Adjustable 121mm (4-3/4") plus or minus 11mm (7/16")

inlet/valve outlet centers• Vacuum breaker• Cover tube, stainless steel wall flange, spud flange, spud nut,

and 330mm (13") outlet tube.

❏ 81T231-20BTSame as 81T231BT, but LESS stop, cover tube and wall flange.

81T231BT

121mm ±13mm(4.75" ±.44")

71mm(2.81")

64mm(2.5")

VACUUMBREAKER

TUBE

19mm(0.75")


& WASHERS

SUPPLIED

137mm(5.4")

330mm(13.0")

54mm(2.13") MIN.

FINISHED WALL

TOP OF FIXTURE

INLET:

25mm (1.0") FIPOR

19mm (0.75")COPPERSWEAT

W/ADAPTOR(SUPPLIED)



Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.DSP–81T231BT


❏ 81T231-30BT – Exposed Battery Operated 3/4'' Top Inlet Urinal FixtureLESS STOP, WITH MODIFIED TAIL TO FIT SLOAN®/ZURN® STOP


• Right or left-hand supply installation• ADA compliant, automatic operation battery powered

infrared sensor• Scratch resistant lens window• Four (4) size AA alkaline batteries factory installed with valve in sleep


factory set at 24” (±2”)• Optional 24 hour automatic flush factory set to on• Set-up sensor range adjustment indicator light, solid state electronics• 6 VDC input, 5 second arming delay, 8° downward beam • Electronic operated non-hold-open metal manual override button


factory set at 60 PSI to 2.7 litre (.70 US gal.) • Adjustable 114mm to 131mm (4.5" to 5.18") inlet/valve outlet centers• Vacuum breaker• Spud flange, spud nut, and 330mm (13") outlet tube

81T231-30BT

81T231-30BT

114mm (4.5")to

131mm (5.18")

64mm(2.5")

VACUUMBREAKER

TUBE

19mm(0.75")


& WASHERS

SUPPLIED

137mm(5.4")

330mm(13.0")

54mm(2.13") MIN.

FINISHED WALL

TOP OF FIXTURE



Model Specified:

Approval: Date:











Model Specified:

Approval: Date:

81T231HW








✔ TRANSFORMERS:

❏ 81T231HW – Exposed Hard Wire Operated 3/4'' Top Inlet Urinal Fixture


• Right or left-hand supply installation• ADA compliant, automatic operation hard wire powered

infrared sensor• Scratch resistant lens window• Infrared sensor range adjustment of 457mm-914mm (18" - 36"),

factory set at 24” (±2”)• Hardwire adaptor• Vandal resistant copper tube conduit• Optional 24 hour automatic flush factory set to on• Set-up sensor range adjustment indicator light, solid state electronics• 24 VAC input, 5 second arming delay, 8° downward beam • Electronic operated non-hold-open metal manual override

button with 5 second lockout• (110 to 24 VAC Transformer not included. See selection below for



with protecting cap• Adjustable 121mm (4-3/4") plus or minus 11mm (7/16") inlet/valve

outlet centers• Vacuum breaker• Cover tube, stainless steel wall flange, spud flange, spud nut,

and 330mm (13") outlet tube

❏ 81T231-20HWSame as 81T231HW, but LESS stop, cover tube and wall flange.



FINISHEDWALL

81T231HW

121mm ±13mm(4.75" ±.44")

71mm(2.81")

64mm(2.5")

VACUUMBREAKER

TUBE

19mm(0.75")


& WASHERS

SUPPLIED

137mm(5.4")

330mm(13.0")

54mm(2.13") MIN.

TOP OF FIXTURE

INLET:

25mm (1.0") FIPOR

19mm (0.75")COPPERSWEAT

W/ADAPTOR(SUPPLIED)



Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.DSP–81T231HW Rev. A




Model Specified:

Approval: Date:

Note: The recommended Flush Valve operating pressure range is between 35 and 65 psi. See page 7.C.18 High Water Pressure note for more details.







✔ TRANSFORMERS:

❏ 81T231-30HW – Exposed Hard Wire Operated 3/4'' Top Inlet Urinal FixtureLESS STOP, WITH MODIFIED TAIL TO FIT SLOAN®/ZURN® STOP


• Right or left-hand supply installation• ADA compliant, automatic operation hard wire powered

infrared sensor• Scratch resistant lens window• Infrared sensor range adjustment of 457mm-914mm (18" - 36"),

factory set at 24” (±2”)• Hardwire adaptor• Vandal resistant copper tube conduit• Optional 24 hour automatic flush factory set to on• Set-up sensor range adjustment indicator light, solid state electronics• 24 VAC input, 5 second arming delay, 8° downward beam • Electronic operated non-hold-open metal manual override

button with 5 second lockout• (110 to 24 VAC Transformer not included. See selection below for


factory set at 60 PSI to 2.7 litre (.70 US gal.)• Adjustable 114mm to 131mm (4.5" to 5.18") inlet/valve outlet centers• Vacuum breaker• Spud flange, spud nut, and 330mm (13") outlet tube



FINISHEDWALL

81T231-30HW

114mm (4.5")to

131mm (5.18")

64mm(2.5")

VACUUMBREAKER

TUBE

19mm(0.75")


& WASHERS

SUPPLIED

137mm(5.4")

330mm(13.0")

54mm(2.13") MIN.

TOP OF FIXTURE


81T231-30HW





152mm(6.0")


Stainless Steel

Coverplate


70mm(2.75")

124mm(4.5")

124mm(4.5")


Model Specified:

Approval: Date:

81T231-WMSBT





❏ 81T231-WMSBT – Exposed Battery Operated 3/4'' Top Inlet Urinal Fixture

• Polished chrome plated vandal resistant metal cover with 4" wallmount sensor• Right or left-hand supply installation• ADA compliant, automatic operation battery powered H2OPTICS


• Four (4) ‘C’ cell batteries • Low battery level indicator (5000 flushes remaining)• Infrared sensor range adjustment of 305mm-711mm (12" - 28"), in 4" increments,

factory set at 20” (±2”)• Vandal resistant copper tube conduit• Adjustable 24 hour courtesy flush factory set to on• 6 VDC input• Electronic manual override button • Quiet action, TECK® exposed diaphragm flush valve• Chloramine resistant diaphragm• Forged brass diaphragm retainer• Renewable seat• Polished chrome plated finish• External water conserving flush adjustment, factory set at 60 PSI

to 2.7 litre (.70 US gal.) • 1" FIP / 3/4" copper sweat inlet adaptor, angle check stop with protecting cap• Adjustable 121mm (4-3/4") plus or minus 11mm (7/16") inlet/valve outlet centers• Vacuum breaker• Cover tube, stainless steel wall flange, spud flange, spud nut, and 330mm

(13") outlet tube.

81T231-WMSBT

121mm ±13mm(4.75" ±.44")

71mm(2.81")

64mm(2.5")

VACUUMBREAKER

TUBE

19mm(0.75")


& WASHERS

SUPPLIED

124mm(4.875")

330 mm (13.0")

54mm(2.13") MIN.

FINISHED WALL

TOP OF FIXTURE

INLET:

25mm (1.0") FIP OR 19mm (0.75")COPPER SWEAT

W/ADAPTOR(SUPPLIED)


Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.DSP–81T231-WMS




Stainless Steel

Coverplate


152mm(6.0")

70mm(2.75")

124mm(4.5")

124mm(4.5")


Model Specified:

Approval: Date:





060704A 110 to 24VAC Class II 20VA(for up to 5 Sensor Modules)



✔ TRANSFORMERS:

❏ 81T231-WMSHW – Exposed Hard Wire Operated 3/4'' Top Inlet Urinal Fixture

• Polished chrome plated vandal resistant metal cover with 4" wallmount sensor

• Right or left-hand supply installation• ADA compliant, automatic operation hard wire powered H2OPTICS

™

technology infrared sensor• Infrared sensor range adjustment of 305mm-711mm (12" - 28"),

in 4" increments, factory set at 20” (±2”)• Hardwire adaptor• Vandal resistant copper tube conduit• Adjustable 24 hour courtesy flush factory set to on• 24 VAC input• Electronic manual override button • (110 to 24 VAC Transformer not included. See selection below for



with protecting cap• Adjustable 121mm (4-3/4") plus or minus 11mm (7/16") inlet/valve

outlet centers• Vacuum breaker• Cover tube, stainless steel wall flange, spud flange, spud nut,

and 330mm (13") outlet tube

81T231-WMSHW

121mm ±13mm(4.75" ±.44")

71mm(2.81")

64mm(2.5")

VACUUMBREAKER

TUBE

19mm(0.75")


& WASHERS

SUPPLIED

124mm(4.875")

330 mm (13.0")

54mm(2.13") MIN.

FINISHED WALL

TOP OF FIXTURE

INLET:

25mm (1.0") FIP OR 19mm (0.75")COPPER SWEAT

W/ADAPTOR(SUPPLIED)

81T231-WMSHW

TECK® Flush Valve


HERE’S HOW THE TECK® FLUSH VALVE OPERATES

1. Flush valve in closed positionWater, at line pressure, lies in the valve where indicated.Whether the installationis exposed or concealed; actuated by oscillating handle; push button or push platethe simply constructed diaphragm mechanism is the same.

2. Flush StartsDepressing the handle opens the relief valve (A).This allows some water in thepressure chamber (B) to escape through chamber (H) to the flush tube.Simultaneously, line pressure (C) forces the diaphragm unit to rise, allowing waterto pass between diaphragm unit (D) and seat (E) to the fixture.As the diaphragmrises it also brings up the non-hold open piston (J) and causes it to seal chamber(H).

3. Valve Open And FlushingWhile water is flowing through the valve to flush the fixture, it is also movingthrough a bypass slot in a regulating screw (G) and into the pressure chamber(B). If the handle is kept in the depressed position, piston (J) will remain seated.The piston (J) will only drop into its original position in the diaphragm unit afterthe handle is released and chamber (H) has been repressurized. (This lastdescribes how the Non-Hold-Open handle works.)

4. Closing CycleFlushing continues until enough water passes through the regulating screw (G) torefill pressure chamber (B) at line pressure. Since the area under pressure on theupper side of the diaphragm is greater than on the lower side, the diaphragm unitdescends, closing off the flow of water and completing the cycle.

STANDARD EQUIPMENTThe following features are supplied as standard equipment on all Teck® Flush Valves.

WATER CONSERVATION FEATURES:External Volume Adjustment* “Non-Hold Open” Handle*Except - 6 models (Also Vandal Resistant)“Pressure Loss Check” StopADDITIONAL FEATURES: Chloramine Resistant DiaphragmAdjustable Tail Forged Brass Diaphragm RetainerCSA Certified Heavy DutyComplies to ASSE 1037 Marine/Ship UseConcealed Spud Nut (Sanitary) Renewable SeatConstant Peak Flow Quiet ActionCopper Sweat Inlet Adaptor - 1" Vacuum Breaker(3/4'' on Urinal Valves) Vandal ResistantDiaphragm Type Valve ADA Compliant Lever Handle

WATER CONSERVATIONAvoiding wasted water results in lower building operating costs.

External Volume AdjustmentAll Teck® Flush Valves allow efficient water usage because they can be externallyadjusted, after installation, so the flush volume matches the requirement of thecompanion fixture. (Except - 6 Models, 6 litre volume factory set valves)

“Non Hold-Open” HandleHolding the handle down, in the open position, activates the flushing cycle.Once started, the flush valve goes through its regular operation cycle and,whencompleted, the valve shuts off, even if the handle continues to be held open.Thisfeature also reduces the risk of too much water which could flood the fixtureand spill onto the floor.

“Pressure Loss Check” StopLoss of pressure in a supply line can cause a flush valve to flush spontaneouslyand run continuously.The “Pressure Loss Check” keeps the upper valve cham-ber and the inlet stop at normal line pressure after each flush cycle, preventingfalse operation of the flush valve when pressure is lost and then restored.Causes of pressure loss can be nearby heavy fire fighting demand, breaks inwater mains, water pump failure, etc. The “Pressure Loss Check” stop alsooffers protection against back siphonage, together with the vacuum breaker.

CONSTANT PEAK FLOWA strong efficient flushing cycle characterizes Teck® Flush Valves.This means a smallvolume of water, when delivered in a short time, does the necessary scouring and cleansing of the fixture.The Teck® flush valve always delivers a constant peakflow of water as the diaphragm travel is not restricted to achieve different flushvolume settings.DIAPHRAGMThe Diaphragm/Seat Washer is molded as a single part.A great deal of engineer-ing, development and testing has gone into the diaphragm in order to give thebest combination of properties including flexibility, endurance and chloramineresistance.With Teck®’s separate regulating feature, only ONE diaphragm is usedon all Teck® Flush Valve models.EASY MAINTENANCEThe few parts within the Teck® Flush Valve make inspection and maintenancequick and straight forward. Originally designed on sound hydraulic principles the entire valve is correspondingly well engineered. A screw driver is the only tool needed for regulation and one diaphragm will service all Teck® model flushvalves.Another example of value engineering is the non-metallic sleeve located atthe handle area which eliminates metal to metal contact, reducing wear and extending product life.TIME TESTEDTeck® Flush Valves have proven their ability to perform under a wide variety ofconditions for over 80 years.The diaphragm, for example, has been in use, withexcellent results, for over 30 years.VANDAL RESISTANCETo stand up to tough conditions Teck® Flush Valves are ruggedly constructed fromthe heavy duty body, to the “Non-Hold-Open” handle, to the vandal resistantcover screw.HIGH WATER PRESSURETeck® flush valves will operate up to 125 psi, however, the PREFERRED OPERATING PRESSURE RANGE IS BETWEEN 35 AND 65 PSI. Pressures over75 psi lead to an increase in noise, water could splash out of the fixture moreeasily and the life of any plumbing valve may be shortened. For pressures over 75psi a pressure reducing valve is recommended.

electronic activated flushvalve 1600t and 1601t...

Documents