Electronic AdhesivesPotting Materials • Conformal Coatings • Chip Bonders Electrically Conductive Adhesives • Strain Relief • Overmolding

Electronic Potting One-Part Heat Cure EpoxiesHeat curing epoxy requires no mixing and demonstrates good insulation properties, high bonding and physical strength. Two-Part EpoxiesTwo component resin system designed for resistance to chemicals, mechanical stress and temperature. Low viscosity, low shrinkage material cures at room temperature.

Two-Part PolyurethanesLow cost, low viscosity formulas with medium temperature resistance, ambient cure, and convenient mixing. Provides good adhesion to various substrates, while remaining flexible and repairable.

Two-Part SiliconesEasy to mix, low viscosity, ambient temperature, deep-section cure compounds with temperature resistance and good insulation properties. Cushions against mechanical shock and vibration.

Re-enterable UrethanesEasy to mix, low durometer compound allows for re-entry and resealing, should a component need to be tested or removed and replaced.

UV AcrylicsCure rapidly under UV light and exhibit good chemical resistance and optical clarity.

About Us

Material Technologies

A family-owned business founded in 1955, ND Industries specializes in the development of innovative materials and processes for the Automotive, Electronics, Aerospace and Military markets. Headquartered outside Detroit, Michigan, ND Industries has facilities devoted to research and development, chemical blending, bottling and packaging, mechanical engineering, and fastener adhesive pre-application. Bottled products produced for OEM and MRO use are marketed under the Vibra-Tite brand name.

The ND Technologies Group holds an A2LA ISO/IEC 17025:2005 accreditation and is able to assist customers by performing independent testing for a wide range of criteria.

TESTING CERT #2628.01

ND Industries can also pre-apply adhesives

and sealants to fasteners for use in

electronics. We carry a wide range of

materials that will increase product quality,

help reduce labor costs, and mitigate fumes,

outgassing and crazing, when compared

to bottled products. Pre-Applied materials

also help prevent contamination of critical

parts by eliminating the opportunity for

user applied liquid bottled products to

migrate into sensitive components during

assembly.

Conformal CoatingsAcrylics• Low viscosity• Fast-drying• Easy chemical removal• Water-based (no VOC) available

Urethanes• One- and two-component• Excellent humidity resistance• Improved chemical resistance• One-part longer cure cycle• High humidity curing requirement

Silicones• Solvent borne• Room temperature cure• Good adhesion• Cures tough

UV Acrylics• Rapid cure speed• Environmentally friendly• Excellent adhesion• Resistance to solvents• Higher insulation resistance• Shadow cure • Reliable secondary cure

Chip BondersEpoxy chemistry• High wet strength• High speed dispensing• High dot profile• Compatible with lead-free process

Electrically ConductiveEpoxy chemistry• Typically silver filled• Excellent electrical conductivity• Excellent water resistance• Excellent chemical resistance• Compatible with lead-free process

Strain Relief• Cyanoacrylates• One-part silicones• UV acrylics

Overmolding• Polyamides• Polyolefin

Material Technologies (continued)

Pre-Applied

Vibra-Tite, a division of ND Industries Inc.1000 North Crooks RoadClawson, MI 48017

Phone: 386-860-4522 Fax: 386-860-4521Email: electronics@vibra-tite.comWeb: www.vibra-tite.com

VT-EAB-2014-01-03