electronic measurement and control instruments … · electronic measurement and control...

ELECTRONIC MEASUREMENTand CONTROL INSTRUMENTS

_ 3 _

ITE-XTRA

XLD-6050

ELECTRONIC MEASUREMENTAND CONTROL INSTRUMENTS1. " ITE " XTRA LEAK DETECTORThe new ITE-XTRA offers every feature you've ever wished for in a halogenleak detector. Innovative MPC circuitry with advanced digital signalprocessing which monitors the sensing tip 2000 times per second. This is aprofessional grade, contractor tough tool designed with reliability and sensitivity in mind and is backed by a 1 YEAR WARRANTY!

ITE-XTRA AUTOMATIC HALOGEN LEAK DETECTOR

FEATURES• Detects all halogenated refrigerants CFC, HFC and HCFC.• Certified to SAE J1627 for R134a, R12, R22.• Microprocessor control with advanced digital signal processing.• 35,5 cm (14") flexible, stainless probe. Tricolor visual display.• Seven (7) levels of sensitivity provide an increase of up to 64x.• Tactile keypad controls. Real time sensitivity adjustment.• Battery test function with battery voltage indication.• True mechanical pumping provides positive airflow through sensing tip.• Mute feature included.• Cordless and portable, operates on 2 "C" cell alkaline batteries (3V DC).• Supplied in resistant carrying case.

SPECIFICATIONS• Ultimate sensitivity: Less than 3 gr. (0.1 oz) / year for all halogen

based refrigerants.• Sensing tip life: Approx. 20 hours• Operating temperature: 0°C to +52°C (30°F to +125°F)• Battery life: approx. 30 hours normal use• Duty cycle: continuous, no limitation• Response time: instantaneous• Reset time: one second• Warm-up time: approximately 2 seconds

SPARE PARTS

ITE-XTRA-2 Maintenance kit (3 sensor tips and 3 tip protectors)

2. " ITE " XTREME LEAK DETECTORXLD-6050 AUTOMATIC HALOGEN LEAK DETECTOR for

CFC, HFC, HCFC including R134a and R404A.With a flexible probe 450 mm (18”) long for accessto motor compartments or other ‘hard to reach’areas.

FEATURES• Microprocessor controlled and advanced digital signal processing

ability. • Tricolour visual display• Seven levels of sensitivity allowing to increase the sensitivity up

to 64 times• Touchpad controlled• Real time sensitivity adjustment • Battery condition indication • Suitable for all halogenated refrigerants • Reset touchpad on the probe handle to eliminate ambient

influences at any time• Equipped with mechanical pump to provide a positive and

increased airflow through the sensor tip.• Audio mute function • Extendable coiled cord connection between the probe handle and

instrument case for more convenient use • Flexible, rubber protected stainless steel end probe, length 45 cm • Supplied with rechargeable batteries and charger with

interchangeable EU and UK electrical plugs.• 2 year warranty

_ 4 _

ITE-8900A

UVL-AC

UVL-PBP

UVL-50W

UVL-240

3. " ITE " ELECTRONIC LEAK DETECTORS FOR OTHER GASES

Suitable for most combustible gases, including PROPANE,ISO-BUTANE and AMMONIA. All are suitable for use in Class 1,Group A, B,C and D (Hazardous locations)

ITE-8900A MICRO-PUMP LEAK DETECTORAutomatic combustible gas detector. Visual leaksize indicator. Adjustable sensitivity. Sensitivity from 5 to 2000 PPM. Suitable for gasoline, propane, Iso-butane, naturalgas, ammonia (NH3) and other compounds.

FEATURES• Visual leak size indicator.• High efficiency pump in probe handle reduces response time.• Automatic warm-up time ± 30 sec. Adjustable sensitivity.• Cordless operation - power supply rechargeable two (2,4 V)

Ni-cad batteries.• Battery charge life: 4 hours - battery charger included.• Low battery indicator. Response time: instantaneous.• Duty cycle: continuous - no limitations.• Operating temperature range: 0°C to +50°C.• Sensitivity for Iso-butane is 50 PPM.• Sensitivity see list below Supplied with CE mark.

APPLICATIONS • Detect leaks in automobile exhaust and fuel systems.• Detect leaks in liquid or gas fired heating systems.• Safety checks at propane filling stations.• Search for arson residue (detect accelerants).• Detect fuel in marine bilges.• Check fuel tanks before welding.• Check manholes / sewers for safety.• Check for cracked heat exchangers.• Detect solvent residues.

REPLACEMENT PARTS

ITE-8806B BATTERY CHARGER

4. UV LEAK DETECTION LAMPUVL-50W UV LAMP, 12V DC 50W, W.5.5DC JACK

FEATURES• The lamp is fan cooled to lower the temperature and protect the

operator from harm, and to extend bulb life when in use.• The anti-erosion plastic and one-piece design ensures a durable

product while maintaining a practical appearance.• Compact size for easy use.• The filter is made of highest grade material allowing stronger light

output.

SPARE PARTS

UVL-BCQ BATTERY CHARGER, 230V-50Hz (1.5A-5 hours)

UVL-BCS BATTERY CHARGER, 230V-50Hz(0.5A-14 hours)

UVL-AC SWITCHING ADAPTER to directly connect to thelamp, 100-240V, 50-60Hz, 1.5A

UVL-PBP PORTABLE BATTERY PACK with bag, 12V, 7,2Ah UVL-GLASS UV PROTECTION GLASSESUVL-240 UNIVERSAL A/C FLUORESCENT DYE 240 ml

(see page 195)

INJEC SYSTEM INJECTOR (see page 39)COI-2OZ COMPRESSOR OIL INJECTOR ADAPTER

(see page 39)

_ 5 _

ITE-H10PM

B9017MM

RA-500

5. " ITE " HEATED DIODE PROFESSIONALREFRIGERANT LEAK DETECTOR

ITE-H10PM PROFESSIONAL REFRIGERANT LEAK DETECTOREXCEEDS "SAE J1627" MOVING PROBE SPECS.

FEATURES• Hand held/stationary all refrigerant leak detector.• The most sensitive battery powered leak detector on the market

today. New extended sensor life mode.• Certified to meet SAE J1627 moving probe specifications.• Auto-balance (auto zero) circuitry and 3 sensitivity ranges allow

you to "WALK IN'' on leaks without further adjustments.• Suitable for any CFC, HCFC, HFC or blends.• Supplied in resistant ABS casing. Made in the U.S.A.• Power supply: lead acid battery including 220V adapter. • Battery clamp or cigarette lighter adapter. Supplied with CE mark.

SPECIFICATIONSSENSITIVITY: Small position: 14,2 gr/yr HFC -

1,5 gr/yr CFC and HCFCMedium position: 28,4 gr/yr HFC -

14,2 gr/yr CFC and HCFCSensor Saver: 141,8 gr/yr HFC -

56,7 gr/yr CFC and HCFCREFERENCE LEAK: ± 12 gram/year R134a (± 6 months life time)POWER SUPPLY: 10 to 16 VDC recharge circuit built in (Std 12V)POWER OPTIONS: 220V AC Adapter (Included)

12 VDC battery clamp adapterAutomotive cigarette lighter adapter

LOW BATTERY: Indicator light "ON" ± 5 min. before endBATTERY LIFE: 1,5 hours (continuous) before recharging

6. " ITE " PORTABLE REFRIGERANTGAS ANALYZER

RA-500 REFRIGERANT ANALYSER

FEATURES• RA-500 utilizes dispersive infrared (NDIR) technology to

determine the weight concentrations of R12, R134a, R22,hydrocarbons and air.

• It also features exclusive "Blend-ID" analytical software, whichquickly and accurately indicates the presence of EPA S.N.A.P.approved blend refrigerants.

• This instrument automatically determines if the purity of R12 andR134a refrigerant is at industry acceptable levels, eliminatingpotential for human error. Pure refrigerant is defined as a refrigerantthat is 98% pure by weight or greater of either R12 or R134a.

SPECIFICATIONS• Exceptionally portable design – goes anywhere you need to go• Identifies EPA S.N.A.P. approved blends on large graphing display• Versatile and easy-to-use• Weight: 3,50 kg (8.0 lbs)• Power requirements: 12-15V DC, Optional battery pack (Internal)• Output: Digital display and LED’s, optional Printer module• Refrigerant: R12, R134a, R22, HC and EPA S.N.A.P. approved blends• Resolution: 0.1% • Operating humidity: 0-95% RH non-condensing• Operating temperature: 5°C to 55°C (40°F to 130°F)• Display: 128 x 64 Pixel Graphing• Warranty: 1 year

RA-500P REFRIGERANT ANALYSER WITH BUILT-INPRINTER

FEATURES• Same specifications as above• Printer module for on-the-spot receipt

_ 6 _

WS-055

WS-005BVS-1L-WS-005-1/4 SAE

WS-AC / USA / EU / UK

" ITE " ELECTRONIC CHARGING& RECOVERY UNITSWS-005 DIGITAL WEIGHING SCALE

FEATURES• Maximum weight capacity: 5000 g• Accuracy: 0,5 g• Operating temperature: 15°C to 30°C• Batteries: 3 x AA• Low battery indication• Auto power off (after 15 minutes without any change in weight,

the scale will turn off. This auto off time of 15 min can beextended).

• Three display modes g, lb, oz• Operates on 220 V• One year full instrument warranty • Supplied with CE mark

WS-005-1L-1/4 DIGITAL WEIGHING SCALEequipped with REFRIGERANTBOTTLE VALVE 1/4”



FEATURES• Same as above

BVS-1L REFRIGERANT BOTTLE VALVE7/16” x 1/4” male flare SAE

BVS-1L-WS-005-1/4 SAE REFRIGERANT BOTTLE VALVE 1/4” xbottle + 1/4” SAE 1/4” male flare SAE with core for WS-005

BVS-1L-WS-005-5/16 SAE REFRIGERANT BOTTLE VALVE 5/16” x bottle + 1/4” SAE 1/4” male flare SAE with core for WS-005

BVS-1L-WS-005-7/16 SAE REFRIGERANT BOTTLE VALVE 7/16” x bottle + 1/4” SAE 1/4” male flare SAE with core for WS-005

WS-055 COMPUTE CHARGING ANDRECOVERY SCALE

FEATURES• Designed for both charging and recovery. Can be used with all

refrigerants and hydrocarbons • 55 kg (120 Lb) max capacity. • Resolution selectable: 5 gr / 0,2 oz / 0,010 lb

2 gr / 0,1 oz / 0,005 lb • Accuracy: ± 0.01 % of reading• Control function (with or without optional valve module): the scale

can be programmed to a desired weight, so that when this valueis reached, the scale will sound a signal

• 9V battery powers all functions • Battery life approximately 60 hours (30 hours when using optional

valve)• Three display modes: kg, lb or lb-oz • Rugged removable platform with independent removable control

module (including prop stand/hanging hook) • Auto power off (after 15 minutes without any change in weight the

scale will turn off. This auto off time of 15 min can be extended.) • Possible to zero scale at any point• Low battery indication• Operating temperature: 0°C to +40°C (32°F to +104°F). • Level sight glass and adjustable feet for perfect level measurement• Weight: 4,05 kg (8.9 Lb) including carrying case

2,88 kg (6.4 Lb) scale only• Carrying case dimensions: 430 x 330 x 100 mm (17” x 13” x 4”) • Platform dimensions: 280 x 280 mm (11” x 11”)• Supplied in tough ABS case • One year full instrument warranty • Supplied with CE mark

_ 7 _

WS-150

WS-AC / USA / EU / UK

WS-150

WS-ASV

BLUE-R

BVS

WS-150

RCYL-12L

REFRIGERANT

WS-ASV

WS-150 HIGH CAPACITY COMPUTE CHARGING SCALE

FEATURES• Designed for both charging and recovery. Can be used with all

refrigerants and hydrocarbons • 150 kg (330 Lb) max capacity.• Resolution selectable: 20 gr / 0,5 oz / 0,05 lb

10 gr / 0,5 oz / 0,02 lb• Accuracy: ± 0.01 % of reading• Control function (with or without optional valve module): the scale

can be programmed to a desired weight, so that when this valueis reached, the scale will sound a signal

• 9V battery powers all functions • Battery life approximately 60 hours (30 hours when using optional

valve)• Three display modes: kg, lb or lb-oz • Rugged removable platform with independent removable control

module (including prop stand/hanging hook) • Auto power off (after 15 minutes without any change in weight the

scale will turn off. This auto off time of 15 min can be extended.) • Possible to zero scale at any point• Low battery indication• Operating temperature: 0°C to +40°C (32°F to +104°F). • Level sight glass and adjustable feet for perfect level measurement• Weight: 4,74 kg (10.5 Lb) including carrying case.

3,56 kg (8 Lb) scale only• Carrying case dimensions: 430 x 330 x 100 mm (17” x 13” x 4”) • Platform dimensions: 280 x 280 mm (11” x 11”)• Supplied in tough ABS case • Supplied with switching adapter with EU and UK plug model

WS-AC-EU/UKInput: 100-240 VAC / 0.3A / 50-60 HzOutput: 9 VDC / 0.6ACable length: 175 cm

• One year full instrument warranty • Supplied with CE mark

WS-AC ADAPTER BODYWS-AC-USA USA PLUG to be used on adapter body WS-ACWS-AC-EU EU PLUG to be used on adapter body WS-ACWS-AC-UK UK PLUG to be used on adapter body WS-AC

WS-ASV MODULE for WS-055 and WS-150

The WS-ASV in combination with the WS-150 or WS-055 weighingscale allows you to quickly dispense a preset amount of refrigerantinto any air-conditioning or refrigeration system or cylinder.

SPECIFICATIONS• Capacity

WS-055 -> 55 kg / 120 lbsWS-150 -> 150 kg / 330 lbs

• Resolution / charge increments2 gr / 0.1 oz / 0.005 lb <-> 5 g / 0.2 oz / 0.01 lb10 gr / 0.5 oz / 0.02 lb <-> 20 g / 0.5 oz / 0.05 lb

• Compatible for all halogenated refrigerants including R134a andR410A.

• Power supply: 220 V, +/- 10 % - 50/60 Hz• Accessory outlet rating: 10/16 A• Weight: 1 kg• Dimensions: 21 x 7,5 x 17,5 cm including fittings

AC INLET 220 V

MAIN SWITCH

SYSTEM

SYSTEM

AC OUTLET 220 V - 10 A

DOSING SWITCH

CHARGING

RECOVERY

_ 8 _

11

1

2

4

3

10 9 8 7 6

5

MULTI-ELECTRONICDIGITAL ANALYSERS 1. THERMO-ANEMOMETERITE-8060 THERMOMETER & ANEMOMETER

For AIR VELOCITY & TEMPERATURE TESTINGWith user manual and batteryComplete unit with carrying case

FEATURES• Sensitive and accurate (ultra low friction sapphire jewel bearing).• Ergonomic and easy-to-use design.• Read while measuring (up two metres remote vane).• Large 17 mm (5/8") LCD Digits (Liquid Crystal Display).• Telephone coiled style cable for Vane: 2 metres.• Mounting nut for long extension. • Low power consumption. Build in low indicator battery. • Data hold function. Maximum hold for temperature.• Vane dimensions: 66 x 133 x 30 mm. Weight: 140 grams.• Meter dimensions: 88 x 168 x 27 mm. Weight: 210 grams.

SPECIFICATIONS• Temperature sensor: "K" type thermocouple.• Meter operating temperature: 0°C to +50°C (+32°F to +122°F).• Vane operating temperature: 0°C to +60°C (+32°F to +140°F).• Operating humidity: Less than 80% (Relative Humidity).• Operating pressure: 500 mbar to 2 bar.• Storage temperature: -40°C to +60°C (-40°F to +140°F).• Power consumption: 6 mA approx. • Battery type: 9V (50 hours life for 300 mA/hr).• AIR VELOCITY READINGS:

m/s: metre per secondft/min: feet per minuteknot: nautical miles per hourKm/hr: kilometre per hourmph: miles per hour

• AIR SPEED MEASUREMENT AVERAGING PERIOD:m/s: 0.6 sec. (approx.).ft/min: 1.2 sec. (approx.).knots: 1.2 sec. (approx.).Km/hr: 2.2 sec. (approx.).mph: 1.4 sec. (approx.).

UNITS RANGE RESOLUTION THRESHOLD ACCURACYm/s 0.0 to 45 0.1 0.3 ± 3% or 0.1

ft/min 0 to 8800 10 60 ± 3% or 10knots 0.0 to 88 0.1 0.6 ± 3% or 0.1Km/hr 0.0 to 140 0.1 1.0 ± 3% or 0.1mph 0.0 to 100 0.1 0.7 ± 3% or 0.1

TEMPERATURE RANGE READINGS:

UNITS RANGE RESOLUTION ACCURACY°C 0 to 60.0 0.1 ± 0.8°C°F 32.0 to 140.0 0.1 ± 1.5°F

LEGEND:

1 "ON-OFF" push button2 Data hold button3 Max. value hold button4 Function selection switch5 Units selection switch6 Units symbols of velocity7 Units symbols of temperature8 Battery low symbol9 Max. hold symbol

10 Data hold symbol11 Error symbol

_ 9 _

TAHL-5

2. 5 IN 1 DIAGNOSTIC RESIDENTIALMETER

TAHL-5 THERMO-, ANEMO-, HUMIDITY, LIGHT METER

FEATURES• 5 in 1 professional measuring instrument: Anemometer, Air Flow,

Hygrometer, Thermometer and Light meter.• Compact, lightweight, wristlet design for easy one hand operation.• Low friction ball bearing mounted wheel design provides high

accuracy at high and low air velocity.• Exclusive photo diode and color correction filter light sensor,

spectrum meets C.I.E. photopic.• High precision thin film capacitance humidity sensor with fast

response to the humidity changes.• Standard type K thermocouple input jack suitable for all kind of

type K probe.• Built-in microprocessor circuit assures excellent performance and

accuracy.• Concise and compact button arrangement, easy operation.• Memorizes the maximum and minimum value with recall.• °C/°F selectable• Lux/feet-candle selectable• Air velocity measuring units selectable for five kind of units.• Air flow (CFM, CMM) measurement can be set to the desired area

dimension.• Multi channel display for relative humidity and temperature

measured values or air velocity and temperature measuredvalues at the same time.

• Zero button design for light meter calibration.• Hold function to freeze the current reading value.

SPECIFICATIONS• Operating temperature: 0°C to 50°C (32°F to 122°F)• Operating humidity: Max. 80% RH• Power supply: 006P DC 9V battery (heavy duty type), included• Power consumption: Approx. DC 6.2 mA• Dimensions: 156 x 60 x 33 mm (6.14 x 2.36 x 1.29 inch)• Weight: 160 g• Soft carrying case• TP-02A Temperature probe, type K, measuring range: -50°C to

+900°C, dimensions: 10 cm tube, Ø 3,2 mm

ELECTRICAL SPECIFICATIONS

REMARK:

ft/min: feet per minute MPH: miles per hourm/s: meters per second knots: nautical miles per hourkm/h: kilometers per hour Ft-cd: feet candle

MEASUREMENT AREA SETTING

CMM 0.001 to 30.000 square meterCFM 0.01 to 322.92 square feet

Temperature (Type K) -148 to 2,372°F 0.1°F ± (1% rdg + 2°F)-100 to 1,300°C 0.1°C ± (1% rdg + 1°C)

Humidity% RH 10 to 95% RH 0.1 % RH

< 70% RH: ± 4% RH≥ 70% RH: (± 4% rdg + 1.2% RH)

Temperature 32 to 122°F 0.1°F ± 2.5°F

(thermister) 0 to 50°C 0.1°C ± 1.2 °C

Air flow CMM 54,000 CMM 0.001 to 1 CMM

cubic meter/min

CFM 1,908,400 CFM 0.001 to 100 CFM

cubic feet/min

MEASUREMENT RANGE RESOLUTION ACCURACY

Air velocity ft/min 80 to 5,910 ft/min 1 ft/minm/s 0.4 to 30.0 m/s 0.1 m/s ≤ 20 m/s: ± 3% F.S.km/h 1.4 to 108.0 km/h 0.1 km/h > 20 m/s: ± 4% F.S.MPH 0.9 to 67.0 mile/h 0.1 MPH

knots 0.8 to 58.3 knots 0.1 knotsTemperature 32 to 122°F 0.1°F ± 2.5°F(thermister) 0 to 50°C 0.1°C ± 1.2°C

REMARK:

ft/min: feet per minute MPH: miles per hourm/s: meters per second knots: nautical miles per hourkm/h: kilometers per hour Ft-cd: feet candle

MEASUREMENT AREA SETTING

CMM 0.001 to 30.000 square meterCFM 0.01 to 322.92 square feet

Temperature (Type K) -148 to 2,372°F 0.1°F ± (1% rdg + 2°F)-100 to 1,300°C 0.1°C ± (1% rdg + 1°C)

Light Lux

0 to 2,200 Lux 1 Lux1,800 to 20,000 Lux 10 Lux ± 5% rdg ± 8 dgt

* auto range Ft-cd

0 to 204.0 Fc 0.1 Ft-cd170 to 2,000 Fc 1 Ft-cd

Humidity% RH 10 to 95% RH 0.1 % RH

< 70% RH: ± 4% RH≥ 70% RH: (± 4% rdg + 1.2% RH)

Temperature 32 to 122°F 0.1°F ± 2.5°F

(thermister) 0 to 50°C 0.1°C ± 1.2 °C

Air flow CMM 54,000 CMM 0.001 to 1 CMM

cubic meter/min

CFM 1,908,400 CFM 0.001 to 100 CFM

cubic feet/min

MEASUREMENT RANGE RESOLUTION ACCURACY

Air velocity ft/min 80 to 5,910 ft/min 1 ft/minm/s 0.4 to 30.0 m/s 0.1 m/s ≤ 20 m/s: ± 3% F.S.km/h 1.4 to 108.0 km/h 0.1 km/h > 20 m/s: ± 4% F.S.MPH 0.9 to 67.0 mile/h 0.1 MPH

knots 0.8 to 58.3 knots 0.1 knotsTemperature 32 to 122°F 0.1°F ± 2.5°F(thermister) 0 to 50°C 0.1°C ± 1.2°C

_ 10 _

SH-88A

TM-99A

SH-1075

3. TEMPERATURE, PRESSURE ANDSUPERHEAT ANALYSER

SH-88A SUPERHEAT CALCULATOR ANALYSERComplete KIT with carrying case.

FEATURES• Contains 16 programmed most common refrigerants used today:

R11, R12, R22, R502, R134a, R404A, NH3 (Ammonia).HCFC-123, HCFC-124, HCFC-125.AZ-20, AZ-50, HP-80, MP-39, MP-52, MP-66.

• No more charts.• Automatically calculates superheat. Saves time and money.• Independently measures temperatures (two points) and gauge

pressure.• Displays temperature differential independently.

Eliminate duplication of instruments. Unit can be automatically zeroed to compensate for altitude andensure permanent accuracy.

• Memory for storage and recall of "HI - LOW" temperature andpressure picks. Has auto shut-off to save battery life.

• Large LCD numerals with backlit display for use in low light.• Optional battery eliminator to save battery and allow for long

memory storage. • Rugged polyethylene carrying case for unit and accessories. • Contains diagnostic anomalies: "HI, "LO", "LOP".

4. SINGLE PROBE THERMOMETER

TM-99A SINGLE PROBE THERMOMETERWith 9V DC battery. Temperature scale in °C and °FReading range: -40°C to +150°C max (-40°F to +300°F)

FEATURES• Same as SH-66-AC (shown below) but with only one SH-1075 probe.• Ambient temperature for use: -23°C to +55°C max (-10°F to +130°F)• Dimensions: 180 x 80 x 25 mm (W x H x D)• See "SPARE PARTS" below for all "SH" available probes

SPARE PARTS

SH-1075 PUNCTURE PROBE: 120 cm, tip max +150°CSH-2010 AIR and SURFACE PROBE: 365 cm, tip max +95°CSH-4011 ALUMINIUM SURFACE PROBE

With snap-on elastic strap. 365 cm, tip max +100°CSH-4040 FAST SURFACE CONTACT PROBE

120 cm, tip max +150°CSH-5005 AIR PROBE with COIL CORD: 120 cm,

tip max +150°CSH-9010 EXTENSION CABLE of 3 m (9.8")SH-9015 EXTENSION CABLE of 16 m (52")

_ 11 _

SH-66-AC

SH-4011

SH-1075

SH-2010

HT-680A

5. MULTI-TEMPERATURE TESTERSH-66-AC MULTI-PROBE THERMOMETER (Complete kit)

With 9V DC Battery. With SH-1075, SH-4011 andSH-2010 probes. Selectable temperature scale in °Cor °F. Reading range: -40°C to +150°C max. (-40°F to +300°F)

FEATURES• Compact and strong hand-held unit.• 10K Thermistor sensors.• Detachable 10K thermistor probes.• Large LCD DISPLAY BOARD indicating:

LO or LLL Temperature or open probeHI or HHH Temperature or short probe.LO-P Battery discharged. (°F) or (°C) selected board.1, 2 or 3 Zones being monitored. Batteries included.

• Ambient temp. use from -17°C up to +54°C (0°F up to +130°F).• Sealed membrane toughpad. • Single keystroke operation.• Timed shut-off. Light "ON" "OFF". • (°C) and (°F) function key.• Operation status on display.• ABS plastic case.

SPECIAL FEATURES• Detachable cover closed case.• Temperature differential measurement function displays updated

differential between probe 1 and probe 2. Three zones (1, 2 and3) can be monitored.

• Probes SH-1075, SH-4011 and SH-2010 are supplied as standard.• See "SPARE PARTS" below for all "SH" available probes.

6. DIGITAL HAND HELDTHERMOCOUPLE THERMOMETER

HT-680A SINGLE PROBE THERMOMETER With 9V DC battery. Selectable temperature in °C or°F. Thermocouple puncture probe.

FEATURES• Hand-held thermocouple digital temperature tester• Durable construction• Wide temperature ranges• Fast response time• 6 button sealed membrane key pad for

- ON/OFF- °C or °F selection- memory high/low recall- probe type selection- backlight- memory clear

• Stainless steel type J thermocouple puncture probe included• Allows the use of J, K, T, or E type thermocouple probes• Display: 4 digit backlit LCD, 10 mm (0.4") high• Temperature range depending on probe type and limited by

specific probe range.• Temperature range for specific supplied J-type probe: -73°C to

482°C (-100 to 900°F)• Resolution: ± 0.1 °F or °C from -99.9 to 999.9°F

±1.0 °F or °C from 1000 to 2200°F and -100 to -400°F• Accuracy: ± 0.5 °F or °C, or ± 0.3% of reading, whichever is

greater (32 to 120°F)• Cold junction compensation: ±0.2 °F from -10°F to 103°F• Ambient range: -23°C to +54°C (-10 to 130°F)• Humidity range: 0% to 90% non-condensing• Displays LO: temperature is below probe range or open probe

HI: temperature is above probe range or shorted probeLO-P: low battery indication

• 9V battery included• Auto shut-off after 30 minutes of non operation• Dimensions: 178 x 76 x 25 mm (7" x 3" x 1")• Supplied in ABS plastic carrying caseAvailable until depletion of our stock.

_ 12 _

SRH-77A

SH-4011

SH-1075

0,63in11in

16mm

D

28cm

50cm

8,3cm 12,5cm

100cm

20in

3,3in 5in

40in

7cm

2,8in

D : S = 8 : 1

S

IRT-7920

SH-5028

7. MULTI-TEMPERATURE AND RELATIVE HUMIDITY TESTER

SRH-77A MULTI-PROBE THERMO-HYGROMETER (complete)With 9V DC Battery. Temperature scale in °C or °F.With SH-1075, SH-4011 and SH-5028 probes.

FEATURES• Ambient temp. use from -23°C up to +55°C (-9°F up to +131°F).• Same as SH-66-AC (page 11) and TM-99A (page 10) but with a

% indication of Relative Humidity (LCD display board). • Instantly calculates the wet bulb temperature. • Reading range: -40°C to +150°C (-40°F to +300°F) • See "SPARE PARTS" below for all "SH" available probes

SPARE PARTSSH-1075 PUNCTURE PROBE: 120 cm, tip max +150°CSH-2010 AIR and SURFACE PROBE: 365 cm, tip max +95°CSH-4011 ALUMINIUM SURFACE PROBE

With snap-on elastic strap. 365 cm, tip max +100°CSH-4040 FAST SURFACE CONTACT PROBE

120 cm, tip max +150°CSH-5005 AIR PROBE with COIL CORD: 120 cm,

tip max +150°CSH-9010 EXTENSION CABLE of 3 m (9.8")SH-9015 EXTENSION CABLE of 16 m (52")

8. DIGITAL INFRA-RED THERMOMETERSIRT-7920 INFRARED THERMOMETER WITH K-TYPE PROBE

FEATURES• IR with laser pointer or K-type thermocouple probe thermometer• Hand-held, easy to operate• °C/°F selectable• Backlit LCD display • Max/min readings• Audible and visible Hi/Lo alarm function• Data memory (50 sets of data) and read function. • Over range indication (OL or -OL)• Auto hold after IR measurement• Auto power off function (IR: 10 sec. or continuous; K-type 30 min)• Power supply: 1 x 9V battery included• Low battery indication• Battery life ±150 hours (laser pointer and backlight turned off)

SPECIFICATIONS IR• Temperature range: -20°C to +500°C (-4°F to +932°F)• Resolution 0,1°C (0,2°F)• Accuracy: ± 2% of reading or ± 2°C (4°F), whichever is greater

(+ see temp. coefficient)• Adjustable emissivity from 0,17 to 1 (preset at 0,95)• Laser pointer 1mW (class 2)• Optical reading ratio: 8:1 with a 25,4 mm (1") min target• Spectral response: 6 to 14µm

SPECIFICATIONS K-TYPE PROBE• Temperature range: -100°C to +1333°C (-148°F to +1999°F)• Resolution and basic accuracy: (at 23 ± 5°C calibration) accuracy

is at 18 to 28°C with relative humidity up 80% (+ see temp.coefficient)

Function Resolution Range Accuracy

°C 0.1°C -100°C~0°C ±(0.2%rdg + 1.0°C)

0°C~200°C ±(0.1%rdg + 1.0°C)

1°C 200°C~1333°C ±(0.2%rdg +2°C)

°F 0.1°F -148°F~32°F ±(0.2%rdg + 2°F)

32°F~200°F ±(0.1%rdg + 2°F)

1°F 200°F~1999°F ±(0.2%rdg + 4°F)

• The basic accuracy does not include the probe-error

GENERAL• Temperature coefficient: 0,1 x the applicable accuracy specification per

°C from 0 to 18°C and 28°C to 50°C (32°F to 64°F and 82°F to 122°F)• Response time: once per second• Operating temperature: 0°C to +50°C (+32°F to +122°F)• Operating humidity: below 80% RH• Storage conditions: -10°C to +60°C (+14°F to +140°F); below

70% RH• Dimensions: 170 x 52 x 38 mm (6,7 x 2,1 x 1,5")• Weight: 180 gr, with battery • Supplied with 1 probe, battery, carrying case and instruction manual.

LaserMarker

_ 13 _

ITE-8909

DM-120C

PM-120C

ITE-8909 NON-CONTACT INFRARED, GUN SHAPE THERMOMETER (probe not included)

FEATURES• Non contact temperature measurement.• Build-in type K thermometer.• °C/°F display selectable.• LCD display, easy readout.• Microprocessor circuit assures maximum possible accuracy.• Gun type, heavy duty & compact housing case.• Records max. & min. readings with recall.• Data hold.• Auto shut off saves battery life.• Battery: 9 V DC

SPECIFICATIONS• Temperature readings: -10°C to +350°C (+14°F to +662°F°).• Resolution: 1°C. Sampling time: approx. 1 second.• Accuracy: + 2% of reading or + 2°C (+ 3°F) whichever is greater• Operating temperature: 0°C to +50°C (+32°F to +122°F). • Operating humidity: less than 80% RH.• Emissivity adjustment from 0.1 to 0.95.• Dimensions: 195 x 120 x 58 mm (7.7 x 4.7 x 2.3").• Weight: 265 gr (0.6 Lbs).

SPARE PARTS

1052-MK Needle probe

9. PANEL MOUNT & POCKETTHERMOMETERS

DM-120C PANEL MOUNT THERMOMETERWith 1,5V DC solar battery

FEATURES• Large stainless steel front flush mounting. NSF Listed. • Remote sensor. Stainless steel case. Bright buffed flange. • 50 mm (2") diameter acrylic lens with 13 mm (1/2") LCD.• 1 metre sensor cord.• 3 x 4 mm (5/32") holes in flange equally spaced on pitch diameter

of 33 mm (15/16").• Ambient temperature of use: -10°C to +65°C (+14°F to +150°F).• Reading temperature range: -40°C to +50°C (-40°F to +300°F).

PM-120C PANEL MOUNT PLASTIC THERMOMETERWith 1,5V DC battery.

FEATURES• Rectangular remote reading thermometer ideal for use where

mounting space is limited or where a plastic housing is preferred.• White polystyrene body. ABS plastic probe with thermistor sensor

in stainless steel tip.• Remote sensor length: 1 metre (39")• 13 mm (1/2") LCD display.• ON/OFF button.• °C/°F selection button.• MAX/MIN button.• Temperature range: -40°C to +50°C (-40°F to +122°F).• Resolution: 0.1°C (0,1°F)• Accuracy: ± 1°C from -20°C to +50°C (±1,8°F from -4°F to +122°F)

± 2°C below -20°C (± -3,6°F below -4°F)• Response time: 30 seconds• Operating temperature: -18°C to +50°C (0°F to +120°F).• 1,5V AA battery included (battery life approx. 1 year)• Dimensions: 69 x 36 x 28 mm (2,7" x 1,4" x 1,1")• Cutout for mounting: 60,3 x 20,6 mm (2,375" x 0,812")

Diameter of spot (mm)

Distance to object (mm)

1,5 mm topmounting holes for bezel screws (2 places)

20,6 mm cutout

Bezel screw (4)

14,0 mm

19,0 mm

10,3 mm

Minimum 8,0 dia probe hole, drill through

9,5 mm

60,3 mm cutout

6,4 mm x 6,4 mm cutout15,8 mm deep slot for probe wire clearance

1,5 mm bottommounting holesfor bezel screws (2 places)

_ 14 _

TPM-58

TPM-62

TPM-62 TPM-58

DT-1001C

DPS-300C

DGT-1415C

TPM-62 PANEL MOUNT PLASTIC THERMOMETER

FEATURES• Rectangular shape thin• Shockproof ABS case• Fixing system with moulded-in elastic tabs• Shatterproof methacrylate ester glass cover• Capillary length 1,5 meter plastic covered• Temperature range: -40°C to +40°C

TPM-58 PANEL MOUNT PLASTIC THERMOMETER

FEATURES• Rectangular shape depth 52 mm• Shockproof ABS case• Fixing system with moulded-in elastic tabs• Glass cover retaining ring• Shatterproof methacrylate ester glass cover• Capillary length 1,5 meter plastic covered• Temperature range: -40°C to +40°C

DT-1001C HORIZONTAL WALL MOUNT THERMOMETER

FEATURES • 1,2 m (48") wire sensor• 114 x 29 x 16 mm• Works by solar power and has an easy to replace battery to

provide power once light level decreases (battery included)• Temperature range: -40°C to +70°C

DPS-300C DIGITAL ELECTRONIC SWIVEL HEAD POCKETTHERMOMETERDesigned and ideal for use in air conditioning, Refrigeration, heating, automotive, etc...

FEATURES• Never need calibration. Stainless steel probe. • Battery life: 6 months.• 3 seconds update. • Swivel head orientable: 30°, 60° and 90°.• Ambient temperature of use: -10°C to +40°C (+14°F to +104°F).• Reading temperature range: -50°C to +150°C (-58°F to +302°F).

DGT-1415C POCKET THERMOMETER

FEATURES• Precision temperature instrument for refrigeration, air conditioning,

food service, industrial, laboratory, automotive, general purpose• 32 mm (11/4") diameter• 127 mm (5") stainless steel stem with pocket clip case• 2 push buttons (ON/OFF)• Normal mode is 10 seconds per display• 1 second update when holding the "ON" button• Temperature range: -50°C to +150°C• Resolution: 0,1°C• Battery: 1 x 393 size 1.5V or equivalent (included)

OFF

ON

_ 15 _

ITE-8030

WT-389

10. POPULAR ALL PURPOSE THERMOMETERS

WT-389 WIDE RANGE THERMOMETERWith °C or °F selection, batteries and probeWARRANTY: 6 months

FEATURES• Digital thermometer with large LCD display• 120 mm stainless steel probe included• Temperature range: -50°C to +260°C (-58°F to +500°F)• Ambient operating temperature: 0°C to +50°C (+32°F to +122°F)• Resolution: 0.1°C to 0.5°C (0.2°F to 0.5°F)• Accuracy: ± 0,5°C • Min/max memory function • Hi and Lo temperature alarm setting• 2 seconds or 10 seconds selectable sampling cycle• Count down timer function up to 99 h 59 min, with audio signal• Selectable auto power off function (± 6 min)• Low battery indication• Power supply: 2 "AAA" size 1.5V DC batteries included• Soft pouch included• Dimensions: 70 x 170 x 29.5 mm (W x H x D)

SPARE PART

WT-389/P TEMPERATURE PUNCTURE PROBE(Already supplied with the WT-389 Unit)

ITE-8030 DIGITAL THERMOMETERWith °C or °F selection

FEATURES• Temperature range: -46°C to +1300°C (-50°F to +1999°F).• Type "K" thermocouple.• Resolution: 1°C (1°F).• Ambient operating temperature: 0°C to +50°C (32°F to 122°F).• Ambient operating humidity: 0% to 90% (at 0°C to 35°C),

0% to 70% (at 35°C to 50°C).• Accuracy: -50°C to +1000°C: 0,3% ± 1°C.

1000°C to 1300°C: 0,5% ± 1°C.• Dimensions: 72 x 135 x 31 mm (W x H x D).• Low battery indication.• Data hold function.• Differential temperature measurements.• Weight: 206 gr (7,2 oz).• See below for all "MK" available probes.

Probe no. Probe description (Type mini K)Max tip Max cord Cord

Cord typeResponse

temp wire temp Length time in sec

1052-MK Needle probe 482°C 105°C 0,9 m PVC straight cord 3

_ 16 _

DT-1630

DTH-1628

SP-120

268

DT-1630 HAND HELD & POCKET DIGITAL THERMOMETERWith "HI-LOW" programmable alarm functionWith °C or °F selection, battery and probe WARRANTY: 6 months

FEATURES• Temperature range: -50°C to +300°C (-58°F to +572°F). • Read out in Celsius (°C) or Fahrenheit (°F).• Switch for read out with 1 second or 15 second intervals.• Soft cable with probe: 100 cm long.• Stainless steel probe: 10 cm long (with tip protector). • Retractable desk stand.• Resolution: 0.1°C (0.1°F).• Alarm sounds when temperature reaches "HIGH" or "LOW" values

as pre-selected. • Dimensions: 59 x 107 x 20 mm (W x H x D).

DTH-1628 HAND HELD & POCKET DUAL DIGITALTHERMO-HYGROMETER (°C & °F)Displays indoor and outdoor temperatures and indoorrelative humidity simultaneously. WARRANTY: 6 months

FEATURES• Temp. measuring range (unit: indoor sensor) 0°C to +50°C

(+32°F to +122°F).Temp. measuring range (probe: outdoor sensor) -50°C to +70°C (-58°F to +158°F).

• Operation temperature: 0°C to +50°C (+32° to +122°F).• Relative humidity: 25% to 95% at +25°C (+77°F).• Resolution of temperature: 0.1°C (0.1°F).• Resolution of humidity: 1% (Relative Humidity). • Selection of Celsius (°C) or Fahrenheit (°F) by slide switch.• Relative humidity measurement is temperature-compensated.• "WET" Indicator: Over 65% of Relative Humidity.• "DRY" Indicator: Below 45% of Relative Humidity.• Wall mounting feature. • Dimensions: 80 x 179 x 20 mm (W x H x D).

SP-120 SOLAR POCKET POWER THERMOMETERSwitchable in Celsius (°C) or Fahrenheit (°F) WARRANTY: 6 months

FEATURES• Operates by using ambient light sources.• Battery: 1.5V DC Back up. • Measuring range: -50°C to +70°C (-58°F to +158°F).• Resolution: 0.1°C• Accuracy: ± 1.5°C

268 WEATHER THERMOMETER

FEATURES• Non-toxic spirit-filled glass tube• Clear polystyrene backing• Black printing• Two suction bowls• Temperature range: -40°C to +50°C (-40°F to +120°F)• Accuracy: ± 1°C (± 2°F)• Dial: 195 x 50 mm (7.7" x 2")• Weight: 74 gr (2.6 oz)

_ 17 _

PT-100

WDT-128-BODY

RS-128C RS-128R

WDT-128-BODY WIRELESS DIGITAL TEMPERATURE UNITbody only

WDT-128R WIRELESS DIGITAL TEMPERATURE UNITwith 1 remote sensor

WDT-128C WIRELESS DIGITAL TEMPERATURE UNITwith 1 remote sensor and extended cable

RS-128R REMOTE SENSOR UNITRS-128C REMOTE SENSOR UNIT with extended cable

of 3 metres. WARRANTY: 6 months

FEATURES

MAIN UNIT• Wireless temperature data transfer from remote sensor unit.• Wireless transfer: 433 MHZ frequency (UK: 418 MHZ)• Memory for min/max temperature• Temperature alarm for every channel• Resolution: 0.1°C• Measuring range for main unit (indoor): -5°C to +50°C• Switchable from °C to °F• Table stand, wall mount feature• Incl. 2 AA batteries, 1,5 V• Dimensions: 117 x 107 x 18 mm. Weight: 179 gr

The main unit can be extended with maximum 3 remote sensor units.

REMOTE SENSOR UNIT• Measuring range: -20°C to +60°C• Water resistant remote sensor unit with LCD and LED indicator• Data transfer: every 30 seconds• Range depends on fabric and location: 20 m to 40 m• Incl. wall mount feature• Incl. 2 AA batteries, 1,5 V• Dimensions: 91 x 59 x 20 mm. Weight: 78 gr

PT-100 DIGITAL POCKET SURFACE THERMOMETERFor an easy and permanent professional useWARRANTY: 6 months.

FEATURES• Measures temperature of evaporator plate and condensing temperatures• Measures air inlet, outlet and surrounding air• Provides fast response - within seconds

SPECIFICATIONS• Measuring range: -40°C to +120°C• Ultra sensitive air and surface reading probe• Large LCD display - 7/16" high, 31/2 digits• Durable hi-impact case but still lightweight• Battery operated: one 9V battery• Temperature hold switch• Accurate within 2/10° surface, 1° air• Resolution: 0,1°C• Dimensions: 38 x 170 x 22 mm

_ 18 _

THM-50

THM-50-S

THM-5025-H

THM-50 REFRIGERATOR & FREEZER THERMOMETERWARRANTY: 6 months

FEATURES • Thermometer with rotatable hook for placement inside

refrigerators or freezers.• Dial has 3 temperature zones with symbols indicating:

- the temperature range for refrigerators- the ** storage temperature for freezers

(for storage over a medium period of time)- the frost zone *** storage temperature for freezers

(for storage over an extended period of time)• 1°C increments• Reading temperature range: -50°C to +50°C• Dimensions: 210 mm x ∅∅ 17 mm

THM-50-S REFRIGERATOR & FREEZER THERMOMETERWARRANTY: 6 months

FEATURES• Non-toxic spirit-filled glass tube completely enclosed. • Hangs or may be permanently mounted. • Dial has 3 temperature zones with symbols indicating:



(for storage over an extended period of time)• 1°C increments• Reading temperature range: -50°C to +50°C• Dimensions: 16 x 94 x 8 mm rectangular frame.

THM-5025-H REFRIGERATOR & FREEZER THERMOMETERWARRANTY: 6 months

FEATURES• Non-toxic liquid filled glass tube and magnifying acrylic lens. • Unit is completely enclosed and hangs or stands. • Dial has 3 temperature zones with symbols indicating:



(for storage over an extended period of time)• 1°C increments• Reading temperature range: -50°C to +25°C• Dimensions: 31 x 123 mm rectangular aluminium frame.

_ 19 _

165

mm

247

mm

143

mm

47 m

m

30 m

m 65 m

m

CIT-120S

98 m

m

CIT-120L

CST-120

CMT-080

CST-080 SURFACE SPRING THERMOMETER from -40°C to +80°C

CST-120 SURFACE SPRING THERMOMETER from -10°C to +120°C

FEATURES• Provides fast and accurate temperature readings of pipes with

diameters between 12,7 mm (1/2") and 100 mm (4")• °C temperature scale• 63 mm (2.5") stainless steel case• Glass window• Accuracy: ± 2°C• Flexible steel spring fastening

CMT-080 SURFACE MAGNET THERMOMETERfrom -40°C to +80°C

CMT-120 SURFACE MAGNET THERMOMETER from -10°C to +120°C

FEATURES• Ideal for use on bearings, ovens, pipes, engines, tanks, dies,

moulds or any other flat metallic surface• °C temperature scale• 63 mm (2.5") stainless steel case• Glass window• Accuracy: ± 2°C• Dual magnets

CIT-080S INDUSTRIAL THERMOMETER straight stem, from-40°C to +80°C

CIT-120S INDUSTRIAL THERMOMETER straight stem, from-10°C to +120°C

FEATURES• Economical socket connected thermometer for use in small

pipelines, tanks and other pressurized systems• 165 mm grey plastic case• °C temperature scale• Glass lens• 100% mercury free• Accuracy: ± 2°C• 47 mm stem with swivel nut to mount into socket• Socket with 1/2" MPT connection to be fitted on system

CIT-080L INDUSTRIAL THERMOMETER angled stem 90°, from -40°C to +80°C

CIT-120L INDUSTRIAL THERMOMETER angled stem 90°, from -10°C to +120°C

FEATURES• Economical socket connected thermometer for use in small

pipelines, tanks and other pressurized systems• 165 mm plastic case• °C temperature scale• Glass lens• 100% mercury free• Accuracy: ± 2°C• 47 mm stem with swivel nut to mount into socket• Socket with 1/2" MPT connection to be fitted on system

_ 20 _

11. TEMPERATURE RECORDERSCR4-220 TWO PEN RECORDER without sensorCR4-220/KTH TWO PEN RECORDER with temperature / humidity

probeCR4-220/KTT TWO PEN RECORDER with dual temperature probeCR4-220/KTP TWO PEN RECORDER with temperature / pressure

probeCR4-220/KPP TWO PEN RECORDER with dual pressure probeCR4-220/KTH TWO PEN RECORDER with temperature / event probe

FEATURES• Two pen, remote reading, chart recorder• Recordings are displayed digitally as well as on paper chart• Offers numerous measurement applications when connected with

one of our 5 plug-in probes (not included)• Recorder automatically recognizes and controls whichever

probes are attached• All functions are managed through simple menus and shown on

a backlit alphanumeric LCD display (16 characters x 2 lines)• Touch pad provides simple operation• Advanced micro controller design for precise measurement and

reliable operation• All settings retained during power off and power loss, no need to

restore settings after power failure• Battery backup, 8 x AA alkaline batteries (48h continuous use), to

continue operation during power failure (batteries not included)• 12 volt operation allows use in vehicle or marine applications

(adapter not included)• Two independent channel alarms give an audible alarm + relay• Probe is field replaceable and calibrated with no special

equipment• Free standing or wall mounted + fold away carrying handle

SPECIFICATIONS• Ambient operating temperature: 0°C to +49°C (+32°F to +120°F)• °C or °F selectable• Chart rotation speed, selectable: 1.5, 3, 6, 12 and 24 hours, 7

and 31 days• Chart rotation mode, selectable: continuous or single turn• Chart speed accuracy: ± 1%• Chart diameter: 152 mm (6”) (60 assorted charts supplied)• Temperature alarm range: -30°C to +50°C (-20°F to +120°F)• Relative humidity alarm range: 0 to 100% RH• Pressure alarm range: 0 to 35 bar (0 to 500 Psi)• Selectable alarm delay (No delay, 10 min, 30 min, 1h, 2h) to prevent

nuisance alarms• Remote alarm connection: normally open contacts 48 VAC/DC,

0.1 A resistive load• 220-240VAC - 50/60Hz adapter included• Dimensions: 185 x 70 x 235 mm (7.25” x 2.75” x 9.25”).

Weight: 1.13 kg (2.5 lb)• CE approved

CR4-220 + KTH probe

SEPARATE PROBE SELECTION, to be used on CR4-220

PART PROBE TYPE

TEMP. RANGE / VOLTAGE RH RANGE / PRESS. RANG / DEW POINTN° ACCURACY RANGE ACCURACY ACCURACY RANGE

0-100% at 0 to +55°CKTH Temperature / humidity -40 to +55°C ±1°C - (+32 to +130°F) - 0 to +55°C

(-40 to +130°F ± 2°F) ambient, ± 2% (+32 to +130°F)

KTT Dual temperature-40 to +55°C ± 1°C

(-40 to +130°F ± 2°F) - - - -

KTP Temperature / pressure-40 to +55°C ± 1°C 0 to 35 bar

(-40 to +130°F ± 2°F) - - (0 to 500 Psi) -± 1%FS

0 to 35 barKPP Dual pressure - - - (0 to 500 Psi) -

± 1%FS

KTE Temperature / event-40 to +55°C ± 1°C 24 VAC-270 VAC

(-40 to +130°F ± 2°F) 24 VDC-180 VDC- - -

Maximum ranges on -30 to +50°C 0 to 35 bar different charts (-20 to +120°F)

ON – OFF 0 to 100%(0 to 500 Psi)

SPARE PARTSCRPENR REPLACEMENT PEN redCRPENB REPLACEMENT PEN blue

_ 21 _

CR87B-220C

25563

CR87B-220C TEMPERATURE RECORDER Remote reading, with 3 different temperatureranges and 3 different recording speeds

FEATURES• Designed specifically for refrigerator, freezer and environmental

temperature measurement.• Employs advanced microcontroller design that enables this

versatile instrument to accurately measure and recordtemperatures in air, gas, liquids, powders, solids, and semi-solids.

• Recordings can be made from any distance up to 30 meters (100feet) away by using an optional long length sensor wire.

• All controls on front panel for fast and easy setup.• Furnished complete with 2 cartridge pens and 60 assorted charts.• Convenient fold down carrying handle and snap-on extra support legs.• Free standing or wall mounted (using existing keyhole slots

located on back of the case).

SPECIFICATIONS• Temp. scale selectable: -40°C to 0°C, -30°C to +10°C, +10°C to +50°C• Ambient operating temperature range: 0°C to +60°C• Ambient operating relative humidity: 96% maximum • Temperature accuracy: ± 1°C• Chart speed selectable: 6 hrs., 24 hrs., 7 days• Chart rotation mode: Selectable - single turn or continuous • Chart speed accuracy: ± 1%• Chart diameter: 152 mm (6”)• Large 3 digit LED display 13 mm (0.5”)• Temperature sensor: 4,5 m (15’) long sensor wire with 102 mm

(4”) stainless steel submersible probe • Primary power supply: 220-240 VAC, 50/60Hz. • Alternative power: 12 Volt vehicle operation with optional adapter • Battery backup: 8 AA Alkaline batteries (not supplied) • Battery life: 48 hours continuous use • Ink type recording pen (black)• Case size: 235 x 184 x 70 mm (91/4” x 71/4” x 23/4”)• Weight: 2 kg (4.7 lbs.)

SPARE PARTS

CR87-10 REPLACEMENT CHARTS -40°C to 0°C / 24hrs (60 charts)

CR87-14 REPLACEMENT CHARTS -30°C to +10°C / 6hrs(60 charts)

CR87-16 REPLACEMENT CHARTS -40°C to 0°C / 7days(60 charts)

CR87-17 REPLACEMENT CHARTS -30°C to +10°C / 7days(60 charts)

CR87-18 REPLACEMENT CHARTS +10°C to +50°C /7days (60 charts)

CR87-22 REPLACEMENT CHARTS -40°C to 0°C / 31days(60 charts)

CR87-S22 Spare temperature sensor, length: 22,8 m (75’)CR87-S30 Spare temperature sensor, length: 30,4 m (100’)CR87-SL3 Extension cable for temperature sensor,

length: 3 m (10’)CRPEN REPLACEMENT PEN blackCRPENR REPLACEMENT PEN (standard) redCRPENB REPLACEMENT PEN (standard) blue

25563 DELTATRAK TEMPERATURE RECORDER

The 5 day disposable temperature recorder is an inexpensive,one-time use temperature recorder indispensable for HVAC/R uses.It gives an accurate 5-day strip chart recording of a wide ambient temperature range. It can be easily changed on the job! After use, recycle it.

FEATURES• Inexpensive• Factory calibrated, no need for field calibration• Security sealed, tamper proof and built rugged.• Ideal monitor/verification of performance of HVAC or refrigeration

units, after installation or repair.• Worry-free from loss or breakage of an expensive recorder.• Simple to understand and use.• Ideal to use when a number of jobs are in progress and several

recorders become necessary.• Never need to repair since they are used only once.• Records in °C and °F.• Measuring range: -25°C to +35°C (-20°F to +100°F)

_ 22 _

TSWM-2/V2

Ø7 Ø4

4 14

17

168

35

93

41

125

1635

61

-T

33

75

˚CPRG

SET

61,5

28,5

70,5

-00

TPM-1/V2

0

+T

TEMPERATURE CONTROLLERS"TOP CLASS PERFORMANCE""ALL IN ONE THERMOSTAT""SMALL IN DIMENSIONS" "LOW IN PRICE"

APPLICATION• Used to display and regulate TEMPERATURES and suitable for

controlling heating or cooling units or systems. • Modular design for easy panel mounting.

FEATURES• Easy to use following the simple instructions in each unit.• Suitable to limit the SET POINT temperature, setting minimum

and maximum values. • Adjustable DIFFERENTIAL (hysteresis) from 1°C to 20°C • Adjustable TIME DELAY between relay commutations

up to 99 min.• Adjustable DEFROST TIME duration (cold operation)

up to 99 min. • Adjustable DEFROST FREQUENCY from 1 to 99 hours.• In case of probe failure the unit displays a MALFUNCTION CODE

and the DEFROST RELAY continues to operate for 24 hours.

SPECIFICATIONS• "CE" Marking• Relay output: 8A, 230 Volt, cos ϕϕ = 1 • Temperature range: -50°C to +99°C (-58°F to +210°F)• Controller accuracy: ± 1°C (± 1.8°F)• Probe tolerance at 25°C: ± 0,4°C (32.7°F)• Standard PROBE-01/V2 included: 1,5 m length (5 Ft)• Maximum probe temperature: 150°C (300°F)• Ambient temperature range: +5°C to +50°C (+41°F to +122°F)• Storage temperature: -30°C to +70°C (-22°F to +158°F)• Dimensions: 75 x 33 mm (2.96 x 1.30 inch)• Panel cut-out dimensions: 70,5 x 28,5 mm (2.76 x 1.13 inch)

1. CONTROLLERS FOR PANEL MOUNTINGTPM-1/V2 THERMOMETER: 230 Volt AC (6.7 mA)TPM-2/V2 THERMOMETER: 12/24 Volt DC (76/55 mA)TSPM-2/V2 THERMOSTAT: 230 Volt AC (8.2 mA) with 1 relayTSPM-1/V2 THERMOSTAT: 12/24 Volt DC (110/71 mA) with

1 relayTSPM-3 THERMOSTAT 3 DIGIT: 230 Volt AC (8.4 mA).

Decimal read out with 3 relaysRelay 1: Control (compressor) 16A, 250 V, cos ϕ = 1Relay 2: Defrost 8A, 250 V, cos ϕ = 1, SPDTswitchRelay 3: Fan 6A, 250 V, cos ϕ = 1, SPSTEquipped with digital input and connector forparameter transfer and data communication.

2. CONTROLLERS FOR WALL MOUNTINGIDEM AS "CONTROLLERS FOR PANEL MOUNTING" EXCEPT FOR:• Dimensions: 170 x 92 x 40 mm (6.7 x 3.6 x 1.5 inch) • Relay output: 16 A, 230 Volt, cos ϕϕ = 1

TSWM-2/V2 THERMOSTAT: 230 Volt AC (8.4 mA)TWM-1/V2 THERMOMETER: 230 Volt AC (6.7 mA)

PROBES FOR ABOVE PANEL AND WALL MOUNTING CONTROLLERS

PROBE-01/V2 PROBE NTC, Length: 1,5 m (5.0 Ft) included with above

PROBE-03/V2 PROBE NTC, Length: 3,0 m (10 Ft)

PROBE-06/V2 PROBE NTC, Length: 6,0 m (20 Ft)

CONTROL OPERATION

TEMPERATURESET POINT

RELAYOFF

RELAYOFF

TEMPERATURESET POINT

RELAY ON RELAY ONDiff.

HEAT

Diff.

COLD

_ 23 _

TSWM-30

TSWM-10

TSWM-35

Ph N

1

2

3

4

5

u

7(3)A/250 VAC

ON

NC.

NO.

OFF

L 220/240VDC

N 50/60Hz

L 220/240VDC

N 50/60Hz

L 220/240VDC

N 50/60Hz

1 3

1 3

1 3

1 2 3 4 5

1 2 3 4 5

TSWM-35/EXT

3. COMMERCIAL - DOMESTICTHERMOSTATS

TSWM-10 PROGRAMMABLE DIGITAL THERMOSTAT

FEATURES• Pre-set 7 days programs• Easy to change pre-set programs• Manual temperature override• Permanent temperature override• Time, room temperature and settings permanently showing on

the display• Adjustable differential • Short cycle delay for cool mode• Operate by 2 x AA size batteries• Heat and cool selectable

SPECIFICATIONS• Temperature range: 5°C to 30°C• Differential: dip switch selectable ± 0.5°C or ± 0.2°C• Temperature accuracy: ± 0.5°C• Rated switching power: 250V, 6A resistive load or 2A inductive

load• Min on time in heating mode: 1 minute• Min off time air-conditioning mode: 3 minutes• Size: 130 x 84 x 30 mm• CE, GS approved

TSWM-30 ELECTRONIC ROOM THERMOSTAT for heatand cool installation

FEATURES• Designed with highly accurate NTC thermistor sensor that,

incorporated with a high performance electronic control circuit,provides accurate temperature switching control

• Easy to operate and to install• Input range: 220-250 VAC• Output: Resistive load: 7AMPS at 230VAC Max. 1,600WATT

Inductive load: 3AMPS at 230VAC• CE, GS approved

4. UNIVERSAL ECONOMYTHERMOSTAT

TSWM-35 THERMOSTAT -35°C +35°C

FEATURES• Fully encased adjustable thermostat• Easy to operate and to install• Can be used for heating or cooling applications• Particularly suitable for automatic adjustment of refrigeration

equipment• Liquid filled sensing bulb (for ambient sensing)

SPECIFICATIONS• Temperature range: -35°C to +35°C• Max. allowable temperature: +55°C• Accuracy: ± 3°C• Differential: 3 ± 2°C• SPDT switch: 16(8)A; 250VAC• Size: 86 x 58 x 35 mm• IP44• CE approved

TSWM-35/EXT THERMOSTAT WITH CAPILLARY -35°C +35°C

FEATURES• Same as above TSWM-35 but with remote sensing bulb• Capillary length: 1,7 meter

220-250V AC50-60 Hz

5A FUSE

5A FUSE

5A FUSE

16 (8) A / 250V AC MAX

220-250V AC 50-60 Hz

COOL

HEAT

P1

2

P1 + 1 = Heating (temp. rising)The contact is closed when heating is requestedThe contact opens when temperature is reached

P1 + 2 = Cooling (temp. descending)The contact is closed when cooling is requestedThe contact opens when temperature is reached

THERMOSTAT

HEATER

THERMOSTAT

THERMOSTAT

HEATER

POWER SW.

CO

NT

RO

LEC

IRC

UIT

1

_ 24 _

TH-850

TH-820

u220V-250V AC50-60Hz 16(8)A/250V

1 2 3 4 5

5

1

PhN

2

4 3

5. PROGRAMMABLE TIMERSTH-820 WEEKLY & DAILY TIMER MODULE

FEATURES• Anti spark filter• Latest technology CMOS quartz micro-controller• Digital electronics general purpose time switch with daily and

weekly programs• Repeat programs with 8 ON/OFF locations• Shortest switching interval 1 minute• LCD indication for time-of-day, weekday and switching status• NiMH rechargeable button cell back up battery for power reserve

more than 200 hours after fully charged. NiMH is an environmental protection free green battery.

• Three ways override operating mode for ON/AUTO/OFF by pushbutton

• Simple and easy to program and operate by multi-functional keys• LED indicates ON/OFF status

SPECIFICATIONS• Input range: 220-250 VAC• Output: Resistive load: 16AMPS at 250VAC

Inductive load: 8AMPS at 250VAC• Back up battery: 1.5 VDC NiMH rechargeable battery• Battery life cycle: 1,000 times from empty to fully charged• Battery reserve time: more than 200 hours after fully charged• CE, GS approved

TH-850 ELECTRONIC PROGRAMMABLE TIMER FORDIN RAIL INSTALLATION

FEATURES• Same features as TH-820 • Easy installation for DIN rail application• Protected with transparent front cover• Designed for full module of 35 mm size

SPECIFICATIONS• Input range: 220-250 VAC• Output: Resistive load: 16AMPS at 230VAC Max. 3,680WATT

Inductive load: 8AMPS at 230VAC• Back up battery: 1.5 VDC NiMH rechargeable battery• Battery life cycle: 1,000 times from empty to fully charged• Battery reserve time: more than 200 hours after fully charged• CE, GS approved

Wiring Diagram

_ 25 _

EA-208A/V2

COLD STORE ALARM& HEATING CABLES1. COLD ROOM EMERGENCY ALARM

& BUILT IN DIGITAL THERMOSTATEA-208A/V2 EMERGENCY ALARM UNIT (Complete kit)

FEATURES• The EMERGENCY ALARM EA-208A/V2 gives safety protection

for cold store and room atmosphere against power cut, accident,the risk of being locked in a low temperature room, etc...

• Provides OPTICAL, ACOUSTIC ALARMS and EMERGENCY LIGHT.• The system fully complies with the norms and regulations and has:

- One 230V/50-60Hz power supply connection.- One DC Battery connection in case of AC power cut.- One built in thermometer-thermostat to permanently

DISPLAY the cold store temperature, to CONTROL it andto send an automatic REMOTE ALARM in case of failureor accident.

• Once the EA-208A/V2 is connected the normal signal light will bepermanently lit. In case of power cut the emergency light comeson automatically. When someone stays locked inside, he canpush down the light switch then the outside optical and acousticalarms will be activated. The alarm stays "ON" until the switchreturns to "OFF".

• The EA-208A/V2 operates simultaneously with AC power andbattery.

• The auxillary relay can operate any remote alarms.

SPECIFICATIONS• Power supply: 230V/50-60Hz• Battery: Ni-Cad 1.2V (five batteries)• Nominal current: 33mA• Emergency lighting lamps: 6V, 200mA (two lamps)• Permanent signal lamp: 12V, 100 mA (one lamp)• Light + alarm autonomy: Above 1 hour• Sound level: Above 90 decibels per metre• Auxiliar relay: 8A, Cos ϕϕ =1• Thermostat relay: 8A, Cos ϕϕ =1 (TSPM-2)• Lighting unit protection: IP 65• Lighting unit dimensions: 106 x 120 x 66 mm• Source dimensions: 240 x 160 x 75 mm

INSTALLATION & INSTRUCTIONS• The EA-208A/V2 should be installed inside the cold store, next to

the exit and at a height accessible to any person.• The power source must be located outside in a visible area.• The Probe must be installed in a free area and protected from any

thermal influence.• The Unit to be connected following the diagram shown below.

Au

xilia

r re

lay

Lighting unit

2m of 6x0,75mm2 special cable is supplied

Optional connection

Allowed distance between units:up to 200 m, with 1 mm2 minimum cable

Thermostat probe

3-4 Permanent signal 12V5-6 Emergency lighting 6V7-8 Switch

Power source device

Remote alarmup to 5 inputs

Th

erm

ost

at r

elay

_ 26 _

W/m

30

20

10

HC-221

_ 23 _

2. SELF-REGULATING FLEXIBLEHEATING CABLE FORTEMPERATURE >65°C

HC-221-1 CABLE SET: 1 mHC-221-5 CABLE SET: 5 mHC-221-10 CABLE SET: 10 mHC-221-50 CABLE SET: 50 m

KIT-905 END SEAL KITKIT-906 JOINTING KITKIT-908 CONNECTION KITHCTK-239 TERMINATION KIT

APPLICATION• This is a parallel circuit SELF-REGULATING CABLE mainly used for

protection against ice formations in pipes and tanks. • It can be used to maintain temperatures of up to +65°C (+150°F) and

is suitable for the general following applications:• AERA CLASSIFICATION: Normal use.• PIPE MATERIAL or SURFACE: Carbon steel, stainless steel,

plastic, painted metallic pipes or surfaces.• ENVIRONMENT: Dry or damp but not corrosive.

FEATURES• The heating element consists of a special polymer with a carbon

mixture which acts as a semi-conductor. • When the temperature drops in the cable, conductivity is created

in the polymer reducing its electrical resistance and therefore, the current travel through the polymer increasing the temperaturewhich controls the temperature level.

• Conversely, when the cable temperature rises, its conductivityreduces therefore increasing its electrical resistance and reducingits power requirements.

SPECIFICATIONS• Power output at 230 Volts and +10°C (+50°F): 25.3 W/m.• Power output depending on temperature: See graph• Continuous max. exposure temperature: +65°C (+150°F).• Intermittent maximum exposure temperature for a maximum

cumulative exposure time: +85°C (+185°F) for 1000 hours.• Electric strength voltage: 1500 Volts.• Nominal external dimensions: 5 x 12 mm.• Nominal weight: 100 g/m (1.2 oz/ft).• Maximum cable length per circuit starting at +10°C (+50°F) and

according to protection sizing: 16 A = 105 m (344 Ft), 20 & 25 A = 120 m (393 Ft).NOTE: The lengths indicated are only approx. for each circuit.

For maximum safety a 30 mA differential must bemaintained.

• Minimum installation temperature: -60°C (-76°F).• Minimum bend radius:

At +20°C (+68°F) = 12,7 mm (1/2" inch)At -40°C (-40°F) = 26 mm (1 inch)

ACCESSORIES• The appropriate connection kit must be used to join and seal the end

of the cable.

POWER OUTPUT (230V) ON INSULATED STEEL PIPES

0 10 20 30 40 50 60 70 °CPipe temperature

1,2 MM2

COPPER CONDUCTOR

TINNEDCOPPER BRAID

(resistance0,01 ΩΩ /m)

MODIFIEDPOLYOLEFININSULATION

SELF-REGULATINGCONDUCTION

Termination kit.....HCTK-239

Connection kitKIT-908

Jointing kit KIT-906

End seal kit KIT-905

_ 27 _

HC-234

HC-2341

CA

B

A

B

D

C

D

220/230/240 V

220/230/240 V

75mm

20mm

20mm

Ø6mm

Ø6mm

Ø12mm

HCTK-383

3. CONSTANT 30W/m WATTAGEHEATING CABLE (230V)

HC-234-1 CABLE WITHOUT BRAIDING PROTECTION length 1 m



HC-2341-1 CABLE WITH BRAIDING PROTECTION length 1 m



FEATURES• These cables offer a permanent CONSTANT WATTAGE power

output per LINEAR METRE (At any length). • Use against frost protection of any metal surface (up to +55°C) as

well as in drainage pipes (Commercial and industrial).• A continuous heating element wire is coiled around the two main

insulated conductors (touching them at regular interval points).This forms many identical parallel resistors and makes it possibleto cut the cable at any required length on refrigeration site.

• The power output is constant between A-B, B-C, C-D, etc...(See bottom picture explanation).

SPECIFICATIONS• Power output at 230V: 30 W/m• Max. exposure temp. power on: +55°C• Max. exposure temp. power off: +70°C• Maximum circuit length: 60 m• Heating zone length: 595 mm• Tinned copper conductors: 0.75 mm2 (two)• Heating conductor element: Nickel-chrome• Insulation material: Silicone rubber• Braided tinned copper sheath: 1 mm2 (HC-341)• Test voltage and "CE" marking: 1500V• Loading tolerance: ± 7%• Outer dimensions: 7.5 x 5.5 mm (HC-2341)• Minimum bend radius at +25°C: 20 mm• Standard reel length: 150 m

Insulation Heating Element

Conductor Insulation

Conductors

Metal Braid

Insulation HeatingElement

Conductor Insulation

Conductors

Structure and internal circuit diagram Heating element Heating zone lengthConductors

HCTK-383 CABLE TERMINATION KITFor both ends as shown on bottom picture

CONTENTS• 20 mm HEAT-SHRINK SLEEVE, Ø 6 mm

To be used with both HC-234 and HC-2341 HEATING CABLES • 75 mm HEAT-SHRINK SLEEVE, Ø 6 mm

To be used with both HC-234 and HC-2341 HEATING CABLES• TWO 20 mm HEAT-SHRINK SLEEVES, Ø 12 mm

Used for HC-2341 HEATING CABLE (only)

The HCTK-383 CABLE TERMINATION KIT is used to protect andinsulate the connection cold lead and the end seal for each lengthof any HC-234 and HC-2341 HEATING CABLES cut of the reel. To use the TERMINATION KIT, check the corresponding generalinstructions of safety for any constant wattage parallel HEATINGCABLES.

HCSS-404 HEAT-SHRINK SLEEVE, Ø 6 mm, length 75 mmUsed for HC-234 and HC-2341 HEATING CABLES

_ 28 _

DLC-040

DLC-040-E

ITE-8015

4. " ITE " DRAIN LINE HEATER CABLEDLC-040 DRAIN LINE HEATER,

length 1 m, 40W, 1322 ohm/m (Wattage on 110V: 10W)

DLC-040-E Same as DLC-040, but with earth contactDLC-052 DRAIN LINE HEATER,

length 1,3 m, 52W, 793 ohm/m (Wattage on 110V: 13W)

DLC-060 DRAIN LINE HEATER, length 1,5 m, 60W, 588 ohm/m (Wattage on 110V: 15W)

DLC-080 DRAIN LINE HEATER, length 2 m, 80W, 330 ohm/m (Wattage on 110V: 20W)


length 3 m, 120W, 147 ohm/m(Wattage on 110V: 30W)




length 5 m, 200W, 53 ohm/m(Wattage on 110V: 50W)

DLC-240 DRAIN LINE HEATER, length 6 m, 240W, 36 ohm/m (Wattage on 110V: 60W)



DLC-360 DRAIN LINE HEATER, length 9 m, 360W, 16 ohm/m(Wattage on 110V: 90W)

DLC-400 DRAIN LINE HEATER, length 10 m, 400W, 13,7 ohm/m (Wattage on 110V: 100W)

FEATURES• Condensates draining.• No condensation for electronic cases.• Temperature maintenance for process heating.

SPECIFICATIONS• External diameter: 5,5 mm• Wall thickness: min. 1,1 mm• Voltage: 110V or 230V• Internal and external insulating material: Silicone rubber• Heater material: Resistive wire Ni/Cr 60/15 or Cu/Ni• Maximum temperature: +200°C (392°F)• Minimum temperature: -40°C (-40°F)• 110V models with 40W/m capacity available upon request.

ANALYSERS, TESTERS &MULTIMETERS1. DIGITAL TESTERSITE-8015 DIGITAL CAPACITANCE METER

FEATURES• Range: 0-20000 µF.• Over range indication.• Fuse protected.• Low battery indication.• Battery life: Alkaline ± 200 hours.• Zero adjustment.• Accuracy: 0.5%.• Operating temperature: 0°C to +40°C (+32°F to +104°F),

0 - 80% relative humidity.• Dimensions: 72 x 135 x 33 mm (W x H x D).• Weight: 207 gr (7,3 oz) including battery.

_ 29 _

PRT-8020

ITE-8010

PRT-8020 PHASE ROTATION TESTER

FEATURES• Shows the correct way to make 3 phase connections and

prevents as such costly damage.• Saves time, no need to disconnect drive shaft couplings.• Identifies open windings.• Visual as well as audible phase rotation indication.• Low battery indicator (insufficient battery power will lead to faulty

testing).• Protected by double insulation voltage withstand protection: DC 6KV.• Reliable solid state components.• Alligator test clips open 12 mm (1/2”) to fit most terminals.• Shirt pocket size.

SPECIFICATIONS• Signal input voltage: 50 to 500 VAC overload Protection till 750 VAC.• Signal input frequency: 45 to 65 Hz.• Operating temperature: 0 to + 40°C.• Operating humidity: less than 80 % relative humidity.• Power supply: 9 volt NEDA 1604 IEC battery.• Dimensions: 85 x 50 x 20 mm (height x width x depth)• Weight: 210 gr including battery.• Accessories included: 200 cm (2 m) test leads with alligator test

clips, instruction manual, vinyl pouch.

ITE-8010 DIGITAL OPTICAL TACHOMETER

FEATURES• Range: 10 to 100000 rpm.• Direct light-beam sensing.• Measuring distance: 50 to 300 mm.• Low battery indication.• Memory recall function.• Data hold function.• Automatic range selection.• Operating temperature: 0°C to +50°C (+32°F to +122°F).• Accuracy: ± 0,01% ± 1 digit (10 to 6000 rpm)

± 0,04% ± 1 digit (6000 to 12000 rpm)± 0,08% ± 1 digit (12000 to 30000 rpm)± 0,15% ± 1 digit (over 30000 rpm).

• Resolution: 0,1 rpm (10 to 9999,9 rpm)1 rpm (10000 to 99999 rpm)10 rpm (over 100000 rpm).

• Dimensions: 192 x 96 x 38 mm.• Weight: 300 gr (including battery).

_ 30 _

SLM-8050

VT-400

SLM-8050 DIGITAL SOUND LEVEL METER

FEATURES• AUTO Measuring Range: 30dB to130dB • Self-calibration• Frequency reading in: dB.• Measuring level range:

A: 30 dB to 130 dBC: 35 dB to 130 dB

• Frequency Range: 30Hz to 8KHz• Microphone: 1/2 inch electret condenser microphone• LCD Digital Display: 1999 (4 digits) Back Light, Auto Power Off• Resolution: 0.1 dB• Display update: 0.5 sec.• Selectable sensing cycle: FAST or SLOW selectable• Accuracy: ± 1.5 dB (under reference conditions, 94dB @1kHz)• Dynamic Range: 50 dB• Maximum and minimum hold function.• Power supply: one 9V battery, NEDA 1604 or IEC 6F22 or JIS 006P • Battery life: approximately 50 hours (with alkaline battery)• Operation Temperature: 5°C to 40 °C.• Operation Humidity: <80% RH• Storage Temperature: -10°C to 60°C• Storage Humidity: <70% RH• In accordance with IEC651 Type 2, ANSI S1.4 Type 2.• Dimensions: 200 x 55 x 38mm (L x W x H)• Weight: about 170 gr (including battery)• Accessories included: Carrying case, 9V battery, instruction

manual and windscreen

2. DIGITAL MULTIMETERSVT-400 UNIVERSAL VOLTAGE TESTER

FEATURES• Designed for industrial purposes and suitable for voltage checks across

two terminals in low voltage, domestic and heavy current circuits.• Testing range: 6-400V AC/DC.• Display: ± 6, 12, 24, 50, 120, 220.• 400V AC/DC= LED.• Max current: 30mA.• Working temperature: -10°C to +50°C.• Frequency: 0-100Hz.• CE and GS approved.• Dimensions Overall length: 20 cm

Tip only: 5 cmThickness: 2 cm

• Weight: 130 gr.

_ 31 _

ITE-8090

Ø 40 mm

ITE-3700

ITE-8090 DIGITAL CLAMP-ON VOLT-OHM-AMMETERThe ideal meter for field maintenance and inspection work on all types of electrical equipment.

FEATURES• Maximum jaw opening: 40 mm.• Peak hold function.• Data hold function.• Continuity alarm below 100 ΩΩ.• Frequency measurements.• Diode check.• Low battery indication.• Operating temperature and humidity:

0°C to +40°C (+32°F to +104°F), below 80% RH.• Storage temperature and humidity:

-10°C to +60°C (+14°F to +140°F), below 80% RH.• Dimensions: 208 x 65 x 31 mm• Weight: 330 gr.• Supplied with test probe, instruction manual, carrying case, 9V

battery.• Ranges 0-600A AC current

0-750V AC voltage0-1000V DC voltage0-20 kΩΩ Resistance0-2 MHz Frequency

ITE-3700 AUTO RANGE DIGITAL MULTIMETER (AC-DC)Capable of measuring, with very high accuracy, all ofthe parameters needed for troubleshooting and fieldmaintenance. Easy to use because of single rotaryfunction switch and autoranging feature.

FEATURES• Automatic power shut-off. Min/max recording.• Data hold. Overload indication.• Polarity indication. Diode check. Low battery indication.• Operating temperature and humidity:

0°C to +40°C, below 80% RH.• Storage temperature and humidity:

-10°C to +60°C, below 70% RH.• Dimensions: 186 x 86 x 39 mm (L x W x H). • Weight : 380 gr.• Supplied with test lads, instruction manual, carrying case and

spare fuse (250V).• Supplied with CE mark. • Warranty 1 year.• Continuity indication below 40 ΩΩ.• Ranges 0-20A AC current

0-20A DC current0-750V AC voltage0-1000V DC voltage0-40 MΩΩ Resistance0-500 kHz Frequency0-30 µµF Capacity test

_ 32 _

FCG-607R

TP-402B

PSA-200B

ACCESSORIES FOR MULTIMETERS, CLAMPMETERS AND OTHER ELECTRONIC TEST INSTRUMENTS

Conform to IEC 1010 norm

FCG-607B BLACK FLEXIBLE CROCODILE GRABBER jaw size 11,5 mmFCG-607R RED FLEXIBLE CROCODILE GRABBER, jaw size 11,5 mm

TP-402B BLACK TOUCH PROBE with stainless steel tip, which allows to come through insulators (wire needle), oxidation coats and compact circuits.

TP-402R RED TOUCH PROBE with stainless steel tip, which allows to come through insulators (wire needle), oxidation coats and compact circuits.

PSS-100B BLACK SILICON PATCH CORD, length 100 centimetres, male x male straight fixed safety.PSS-200B Idem as above but length 200 centimetres.PSS-100R RED SILICON PATCH CORD, length 100 centimetres, male x male straight fixed safety.PSS-200R Idem as above but length 200 centimetres.

PSA-200B BLACK SILICON PATCH CORD, length 100 centimetres, male right angled safety -

male straight safety.PSA-200R RED SILICON PATCH CORD, length 100 centimetres, male right angled safety -

male straight safety.

< 50 172

< 5 140

1000-60to

+180

-20to

+80

41000 V

6

20

25 2000

FCG-607BFCG-607RTP-402BTP-402R

PSS-100BPSS-100RPSS-200BPSS-200RPSA-200BPSA-200R

20(max)

30(max)

REFMax.

Current(A)

VoltageConnec-

tionsØ (mm)

Resis-tancemΩ

Length(mm)

Temp. Range (°C)

_ 1 _

Part. nr. Pdf file Part. nr. Pdf file Part. nr. Pdf file

1002-BC see Service manifolds, gauges and charging hoses1002-BC/247 see Service manifolds, gauges and charging hoses1002-BC/4 see Service manifolds, gauges and charging hoses1002-BC/447 see Service manifolds, gauges and charging hoses1002-BPC see Service manifolds, gauges and charging hoses

1002-BPC/410 see Service manifolds, gauges and charging hoses1002-BPC/410/27 see Service manifolds, gauges and charging hoses1003 see Evacuating and charging equipment1004-BC see Service manifolds, gauges and charging hoses1004-BC/247 see Service manifolds, gauges and charging hoses

1004-BC/4 see Service manifolds, gauges and charging hoses1004-BC/447 see Service manifolds, gauges and charging hoses1004-BPC see Service manifolds, gauges and charging hoses1004-BPC/410 see Service manifolds, gauges and charging hoses1004-BPC/410/27 see Service manifolds, gauges and charging hoses

100-B-02 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"100-B-04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"100-B-06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"100-B-08 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"1012-BC see Service manifolds, gauges and charging hoses

1012-BC/247 see Service manifolds, gauges and charging hoses1012-BC/4 see Service manifolds, gauges and charging hoses1012-BC/447 see Service manifolds, gauges and charging hoses1012-BPC see Service manifolds, gauges and charging hoses1012-BPC/410 see Service manifolds, gauges and charging hoses

1012-BPC/410/27 see Service manifolds, gauges and charging hoses1014-BC see Service manifolds, gauges and charging hoses1014-BC/247 see Service manifolds, gauges and charging hoses1014-BC/4 see Service manifolds, gauges and charging hoses1014-BC/447 see Service manifolds, gauges and charging hoses

1014-BPC see Service manifolds, gauges and charging hoses1014-BPC/410 see Service manifolds, gauges and charging hoses1014-BPC/410/27 see Service manifolds, gauges and charging hoses101-B-02 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"101-B-04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

101-B-06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"101-B-08 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"1020-XFC see Copper tubes, coils & solder fittings (Inch & Metric)102-B-06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"102-B-08 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

103-B-02 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"103-B-04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"103-B-06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"103-B-08 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"103-FS see Tube working tools

104-B-04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"1052-MK see Electronic measurement and control instruments1084-BC see Service manifolds, gauges and charging hoses1084-BC/247 see Service manifolds, gauges and charging hoses1084-BC/4 see Service manifolds, gauges and charging hoses

1084-BC/447 see Service manifolds, gauges and charging hoses1084-BPC see Service manifolds, gauges and charging hoses1084-BPC/410 see Service manifolds, gauges and charging hoses1084-BPC/410/27 see Service manifolds, gauges and charging hoses108-B-02 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

108-B-04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"108-B-06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"108-B-08 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"109-B-02 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"109-B-04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

109-B-06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"109-B-08 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"110-B-04x02 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"110-B-06x02 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"110-B-06x04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

110-B-08x02 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"110-B-08x04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"110-B-08x06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"110-B-12x06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"110-B-12x08 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"


112-B-04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"112-B-06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"112-B-08 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"113-B-02x24 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"113-B-04x24 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

113-B-04x32 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"113-B-04x48 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"116-B-02 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"116-B-04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"116-B-06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

116-B-08 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"117-B-02 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"117-B-04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"117-B-06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"1184-BC see Service manifolds, gauges and charging hoses

1184-BC/247 see Service manifolds, gauges and charging hoses1184-BC/4 see Service manifolds, gauges and charging hoses1184-BC/447 see Service manifolds, gauges and charging hoses1184-BPC see Service manifolds, gauges and charging hoses1184-BPC/410 see Service manifolds, gauges and charging hoses

1184-BPC/410/27 see Service manifolds, gauges and charging hoses119-B-04x02 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"119-B-06x04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"119-B-08x06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"120-B-02x02 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

120-B-04x02 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"120-B-04x04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"120-B-06x04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"120-B-06x06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"120-B-08x06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

120-B-08x08 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"121-B-02 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"121-B-04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"121-B-06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"121-B-08 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"


123-B-04x02 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"123-B-06x04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"124-RW see Tube working tools127-RW see Tube working tools127-RWO see Tube working tools

1284-BC see Service manifolds, gauges and charging hoses1284-BC/247 see Service manifolds, gauges and charging hoses1284-BC/4 see Service manifolds, gauges and charging hoses1284-BC/447 see Service manifolds, gauges and charging hoses1284-BPC see Service manifolds, gauges and charging hoses

1284-BPC/410 see Service manifolds, gauges and charging hoses1284-BPC/41027 see Service manifolds, gauges and charging hoses129-B-02x24 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"129-B-04x15 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"1335-BA-03 see Fluid control components

1335-BA-04 see Fluid control components1335-BA-06 see Fluid control components1342-BA-06 see Fluid control components1342-BA-08 see Fluid control components1342-BA-12 see Fluid control components

1342-BA-16 see Fluid control components1342-BA-20 see Fluid control components1342-BA-24 see Fluid control components1342-BT-06S06 see Fluid control components1342-BT-06S06 see Fluid control components

1342-BT-06S07 see Fluid control components1342-BT-06S07 see Fluid control components1342-BT-06S09 see Fluid control components1342-BT-06S09 see Fluid control components1342-BT-08S09 see Fluid control components



1342-BT-16S21 see Fluid control components1359-FS-04 see Fluid control components1359-FS-06 see Fluid control components1359-FS-08 see Fluid control components1359-FS-10 see Fluid control components

1359-FS-12 see Fluid control components1359-FS-16 see Fluid control components1602-BC/410 see Service manifolds, gauges and charging hoses160-P2 see Refrigeration accessories160-P5 see Refrigeration accessories

1612-BC/410 see Service manifolds, gauges and charging hoses1622-BC/410 see Service manifolds, gauges and charging hoses16801 see Service manifolds, gauges and charging hoses16802 see Service manifolds, gauges and charging hoses16803 see Service manifolds, gauges and charging hoses

16-C see Service manifolds, gauges and charging hoses16-C see Automatic access valves & fittings174-F see Tube working tools174-F-SP see Tube working tools17-C see Automatic access valves & fittings

1802-A see Copper tubes, coils & solder fittings (Inch & Metric)1802-B see Copper tubes, coils & solder fittings (Inch & Metric)1802-BPC/410 see Service manifolds, gauges and charging hoses1802-XFC see Copper tubes, coils & solder fittings (Inch & Metric)1803 see Copper tubes, coils & solder fittings (Inch & Metric)

1812-BPC/410 see Service manifolds, gauges and charging hoses1822-BPC/410 see Service manifolds, gauges and charging hoses1827 see Copper tubes, coils & solder fittings (Inch & Metric)18-C see Automatic access valves & fittings193-S see Tube working tools

193-S-SP see Tube working tools195-FB see Tube working tools195-FC see Tube working tools195-FC-SP see Tube working tools19-C see Automatic access valves & fittings

2001-VG see Service manifolds, gauges and charging hoses2001-VG see Service manifolds, gauges and charging hoses203-FA see Tube working tools2041-BT-2 see Fluid control components2041-BT-2 see Fluid control components

2041-BT-2S2 see Fluid control components2041-BT-2S2 see Fluid control components2041-BT-3 see Fluid control components2041-BT-3 see Fluid control components2041-BT-3S3 see Fluid control components

2041-BT-3S3 see Fluid control components2041-BT-4 see Fluid control components2041-BT-4 see Fluid control components2041-BT-4S4 see Fluid control components2041-BT-4S4 see Fluid control components

2041-BT-4S5 see Fluid control components2041-BT-4S5 see Fluid control components2041-BT-5 see Fluid control components2041-BT-5 see Fluid control components2041-BT-5S5 see Fluid control components


205-P06 see Evacuating and charging equipment205-P06 see Refrigeration accessories205-P1 see Evacuating and charging equipment205-P1 see Refrigeration accessories205-P4 see Evacuating and charging equipment

205-P4 see Refrigeration accessories206-FB see Tube working tools20-A see Automatic access valves & fittings21702-0 see Evacuating and charging equipment21751 see Evacuating and charging equipment

227-FA see Tube working tools2444-RC see Refrigeration accessories25563 see Electronic measurement and control instruments25860 see Refrigeration accessories25863 see Refrigeration accessories

25869 see Refrigeration accessories25870 see Refrigeration accessories260-FHA see Tube working tools268 see Electronic measurement and control instruments26880 see Tube working tools

26-C see Automatic access valves & fittings270-F-06 see Tube working tools270-F-08 see Tube working tools270-F-10 see Tube working tools270-F-12 see Tube working tools

270-F-14 see Tube working tools270-F-16 see Tube working tools270-F-18 see Tube working tools271-F see Tube working tools275-FS see Tube working tools

275-FSC see Tube working tools275-FSM see Tube working tools27805 see Tube working tools27806 see Tube working tools27806M see Tube working tools

27808 see Tube working tools27808M see Tube working tools27810 see Tube working tools27810M see Tube working tools27812 see Tube working tools

27812M see Tube working tools27814M see Tube working tools27816M see Tube working tools27818M see Tube working tools27820M see Tube working tools

27-C see Automatic access valves & fittings2802-BC see Service manifolds, gauges and charging hoses2802-BC see Service manifolds, gauges and charging hoses2802-BC/247 see Service manifolds, gauges and charging hoses2802-BC/27 see Service manifolds, gauges and charging hoses

2802-BC/4 see Service manifolds, gauges and charging hoses2802-BC/447 see Service manifolds, gauges and charging hoses2802-BPC see Service manifolds, gauges and charging hoses2802-BPC see Service manifolds, gauges and charging hoses2802-BPC/410 see Service manifolds, gauges and charging hoses

2802-BPC/410 see Service manifolds, gauges and charging hoses2802-BPC/410/27 see Service manifolds, gauges and charging hoses2802-BPC-1.0/410 see Service manifolds, gauges and charging hoses2802-G-BC see Service manifolds, gauges and charging hoses2802-G-BC/247 see Service manifolds, gauges and charging hoses

2802-G-BC/4 see Service manifolds, gauges and charging hoses2802-G-BC/447 see Service manifolds, gauges and charging hoses2802-G-BPC see Service manifolds, gauges and charging hoses2804-BC see Service manifolds, gauges and charging hoses2804-BC/247 see Service manifolds, gauges and charging hoses

2804-BC/27 see Service manifolds, gauges and charging hoses2804-BC/4 see Service manifolds, gauges and charging hoses2804-BC/447 see Service manifolds, gauges and charging hoses2804-BPC see Service manifolds, gauges and charging hoses2804-G-BC see Service manifolds, gauges and charging hoses

_ 2 _


2804-G-BC/247 see Service manifolds, gauges and charging hoses2804-G-BC/4 see Service manifolds, gauges and charging hoses2804-G-BC/447 see Service manifolds, gauges and charging hoses2804-G-BPC see Service manifolds, gauges and charging hoses2805-BC see Service manifolds, gauges and charging hoses

2805-BC/247 see Service manifolds, gauges and charging hoses2805-BC/27 see Service manifolds, gauges and charging hoses2805-BC/4 see Service manifolds, gauges and charging hoses2805-BC/447 see Service manifolds, gauges and charging hoses2805-BPC see Service manifolds, gauges and charging hoses

2805-G-BC see Service manifolds, gauges and charging hoses2805-G-BC/247 see Service manifolds, gauges and charging hoses2805-G-BC/4 see Service manifolds, gauges and charging hoses2805-G-BC/447 see Service manifolds, gauges and charging hoses2805-G-BPC see Service manifolds, gauges and charging hoses

2812-BC see Service manifolds, gauges and charging hoses2812-BC/247 see Service manifolds, gauges and charging hoses2812-BC/27 see Service manifolds, gauges and charging hoses2812-BC/4 see Service manifolds, gauges and charging hoses2812-BC/447 see Service manifolds, gauges and charging hoses

2812-BPC see Service manifolds, gauges and charging hoses2812-BPC/410 see Service manifolds, gauges and charging hoses2812-BPC/410 see Service manifolds, gauges and charging hoses2812-BPC/410/27 see Service manifolds, gauges and charging hoses2812-BPC-1.0/410 see Service manifolds, gauges and charging hoses



2814-BPC see Service manifolds, gauges and charging hoses2814-G-BC see Service manifolds, gauges and charging hoses2814-G-BC/247 see Service manifolds, gauges and charging hoses2814-G-BC/4 see Service manifolds, gauges and charging hoses2814-G-BC/447 see Service manifolds, gauges and charging hoses

2814-G-BPC see Service manifolds, gauges and charging hoses2815-BC see Service manifolds, gauges and charging hoses2815-BC/247 see Service manifolds, gauges and charging hoses2815-BC/27 see Service manifolds, gauges and charging hoses2815-BC/4 see Service manifolds, gauges and charging hoses

2815-BC/447 see Service manifolds, gauges and charging hoses2815-BPC see Service manifolds, gauges and charging hoses2815-G-BC see Service manifolds, gauges and charging hoses2815-G-BC/247 see Service manifolds, gauges and charging hoses2815-G-BC/4 see Service manifolds, gauges and charging hoses

2815-G-BC/447 see Service manifolds, gauges and charging hoses2815-G-BPC see Service manifolds, gauges and charging hoses2822-BC see Service manifolds, gauges and charging hoses2822-BC/247 see Service manifolds, gauges and charging hoses2822-BC/27 see Service manifolds, gauges and charging hoses

2822-BC/4 see Service manifolds, gauges and charging hoses2822-BC/447 see Service manifolds, gauges and charging hoses2822-BPC see Service manifolds, gauges and charging hoses2822-BPC/410 see Service manifolds, gauges and charging hoses2822-BPC/410 see Service manifolds, gauges and charging hoses

2822-BPC/410/27 see Service manifolds, gauges and charging hoses2822-BPC-1.0/410 see Service manifolds, gauges and charging hoses2822-G-BC see Service manifolds, gauges and charging hoses2822-G-BC/247 see Service manifolds, gauges and charging hoses2822-G-BC/4 see Service manifolds, gauges and charging hoses

2822-G-BC/447 see Service manifolds, gauges and charging hoses2822-G-BPC see Service manifolds, gauges and charging hoses2824-BC see Service manifolds, gauges and charging hoses2824-BC/247 see Service manifolds, gauges and charging hoses2824-BC/27 see Service manifolds, gauges and charging hoses

2824-BC/4 see Service manifolds, gauges and charging hoses2824-BC/447 see Service manifolds, gauges and charging hoses2824-BPC see Service manifolds, gauges and charging hoses2824-G-BC see Service manifolds, gauges and charging hoses2824-G-BC/247 see Service manifolds, gauges and charging hoses

2824-G-BC/4 see Service manifolds, gauges and charging hoses2824-G-BC/447 see Service manifolds, gauges and charging hoses2824-G-BPC see Service manifolds, gauges and charging hoses2825-BC see Service manifolds, gauges and charging hoses2825-BC/247 see Service manifolds, gauges and charging hoses

2825-BC/27 see Service manifolds, gauges and charging hoses2825-BC/4 see Service manifolds, gauges and charging hoses2825-BC/447 see Service manifolds, gauges and charging hoses2825-BPC see Service manifolds, gauges and charging hoses2825-G-BC see Service manifolds, gauges and charging hoses

2825-G-BC/247 see Service manifolds, gauges and charging hoses2825-G-BC/4 see Service manifolds, gauges and charging hoses2825-G-BC/447 see Service manifolds, gauges and charging hoses2825-G-BPC see Service manifolds, gauges and charging hoses2831-BC see Service manifolds, gauges and charging hoses

2831-BC/247 see Service manifolds, gauges and charging hoses2831-BC/27 see Service manifolds, gauges and charging hoses2831-BC/4 see Service manifolds, gauges and charging hoses2831-BC/447 see Service manifolds, gauges and charging hoses2831-BPC see Service manifolds, gauges and charging hoses

2831-BPC/410 see Service manifolds, gauges and charging hoses2831-BPC/410/27 see Service manifolds, gauges and charging hoses2851-BC see Service manifolds, gauges and charging hoses2851-BC/247 see Service manifolds, gauges and charging hoses2851-BC/27 see Service manifolds, gauges and charging hoses

2851-BC/4 see Service manifolds, gauges and charging hoses2851-BC/447 see Service manifolds, gauges and charging hoses2851-BPC see Service manifolds, gauges and charging hoses2851-BPC/410 see Service manifolds, gauges and charging hoses2851-BPC/410/27 see Service manifolds, gauges and charging hoses

300-CO1 see Refrigeration accessories300-CO1 see Refrigeration accessories300-FB see Service manifolds, gauges and charging hoses312-FC see Service manifolds, gauges and charging hoses312-FC-SP see Service manifolds, gauges and charging hoses

32387 see Refrigeration accessories32392 see Refrigeration accessories32399 see Refrigeration accessories32650 see Tube working tools33490 see Refrigeration accessories

33492 see Refrigeration accessories350-FHA see Tube working tools360-FHA see Tube working tools3639 see Fluid control components3640 see Fluid control components

3641 see Fluid control components364-FH-02 see Tube working tools364-FH-03 see Tube working tools364-FHA-04 see Tube working tools364-FHA-05 see Tube working tools

364-FHA-06 see Tube working tools364-FHA-08 see Tube working tools364-FHA-10 see Tube working tools364-FHA-12 see Tube working tools364-FHA-14 see Tube working tools

364-FHA-16 see Tube working tools364-FHB-04 see Tube working tools364-FHB-05 see Tube working tools364-FHB-06 see Tube working tools364-FHB-08 see Tube working tools

364-FHBM-06 mm see Tube working tools364-FHBM-08 mm see Tube working tools364-FHBM-10 mm see Tube working tools364-FHBM-12 mm see Tube working tools3700 see Fluid control components

3701 see Fluid control components3702 see Fluid control components3703 see Fluid control components3704 see Fluid control components3706 see Fluid control components

370-FH see Tube working tools3738 see Fluid control components375-FS see Tube working tools3810 see Fluid control components3817 see Fluid control components

3826 see Fluid control components3831 see Fluid control components3832 see Fluid control components3836 see Fluid control components3838 see Fluid control components

3839 see Fluid control components3840 see Fluid control components3841 see Fluid control components38610 see Tube working tools38760 see Tube working tools

38760M see Tube working tools38770 see Tube working tools38770M see Tube working tools3HDA-120 see Service manifolds, gauges and charging hoses3HDA-36 see Service manifolds, gauges and charging hoses

3HDA-48 see Service manifolds, gauges and charging hoses3HDA-60 see Service manifolds, gauges and charging hoses3HDA-72 see Service manifolds, gauges and charging hoses3HDCA-36/410 see Service manifolds, gauges and charging hoses3HDCA-48/410 see Service manifolds, gauges and charging hoses

3HDCA-60/410 see Service manifolds, gauges and charging hoses3HDCA-72/410 see Service manifolds, gauges and charging hoses3HDCS-36/410/V see Service manifolds, gauges and charging hoses3HDCS-60/410/V see Service manifolds, gauges and charging hoses3HDCS-72/410/V see Service manifolds, gauges and charging hoses

3HDS-36/V see Service manifolds, gauges and charging hoses3HDS-60/V see Service manifolds, gauges and charging hoses3HDS6-60 see Service manifolds, gauges and charging hoses3HDS6-60/V see Service manifolds, gauges and charging hoses3HDS6-72 see Service manifolds, gauges and charging hoses

3HDS6-72/V see Service manifolds, gauges and charging hoses3HDS-72/V see Service manifolds, gauges and charging hoses40190 see Service manifolds, gauges and charging hoses40192 see Service manifolds, gauges and charging hoses40193 see Service manifolds, gauges and charging hoses

40200 see Evacuating and charging equipment40200 see Service manifolds, gauges and charging hoses40200-125 see Evacuating and charging equipment40200-125 see Service manifolds, gauges and charging hoses40200-200 see Evacuating and charging equipment

40200-200 see Service manifolds, gauges and charging hoses40201-125 see Evacuating and charging equipment40201-125 see Service manifolds, gauges and charging hoses406-FA see Tube working tools4240-MF see Copper tubes, coils & solder fittings (Inch & Metric)

5001A-06 see Copper tubes, coils & solder fittings (Inch & Metric)5001A-08 see Copper tubes, coils & solder fittings (Inch & Metric)5001A-10 see Copper tubes, coils & solder fittings (Inch & Metric)5001A-108 see Copper tubes, coils & solder fittings (Inch & Metric)5001A-12 see Copper tubes, coils & solder fittings (Inch & Metric)








5002A-76 see Copper tubes, coils & solder fittings (Inch & Metric)5002A-80 see Copper tubes, coils & solder fittings (Inch & Metric)5002A-89 see Copper tubes, coils & solder fittings (Inch & Metric)500-CO1 see Refrigeration accessories500-FC see Tube working tools

500-FCM see Tube working tools500-P1 see Evacuating and charging equipment500-P1 see Refrigeration accessories500-P5 see Evacuating and charging equipment5040-06 see Copper tubes, coils & solder fittings (Inch & Metric)

5040-08 see Copper tubes, coils & solder fittings (Inch & Metric)5040-10 see Copper tubes, coils & solder fittings (Inch & Metric)5040-108 see Copper tubes, coils & solder fittings (Inch & Metric)5040-12 see Copper tubes, coils & solder fittings (Inch & Metric)5040-133 see Copper tubes, coils & solder fittings (Inch & Metric)








_ 3 _








5090-15-12 see Copper tubes, coils & solder fittings (Inch & Metric)5090-16 see Copper tubes, coils & solder fittings (Inch & Metric)5090-18 see Copper tubes, coils & solder fittings (Inch & Metric)5090-18-15 see Copper tubes, coils & solder fittings (Inch & Metric)5090-22 see Copper tubes, coils & solder fittings (Inch & Metric)

5090-22-15 see Copper tubes, coils & solder fittings (Inch & Metric)5090-22-18 see Copper tubes, coils & solder fittings (Inch & Metric)5090-28 see Copper tubes, coils & solder fittings (Inch & Metric)5090-35 see Copper tubes, coils & solder fittings (Inch & Metric)5090-42 see Copper tubes, coils & solder fittings (Inch & Metric)








5130-76 see Copper tubes, coils & solder fittings (Inch & Metric)5130-89 see Copper tubes, coils & solder fittings (Inch & Metric)5130R-06-08B-06 see Copper tubes, coils & solder fittings (Inch & Metric)5130R-06-10B-06 see Copper tubes, coils & solder fittings (Inch & Metric)5130R-08-06B-06 see Copper tubes, coils & solder fittings (Inch & Metric)

5130R-08-06B-08 see Copper tubes, coils & solder fittings (Inch & Metric)5130R-08-10B-08 see Copper tubes, coils & solder fittings (Inch & Metric)5130R-10-06B-10 see Copper tubes, coils & solder fittings (Inch & Metric)5130R-10-08B-08 see Copper tubes, coils & solder fittings (Inch & Metric)5130R-10-08B-10 see Copper tubes, coils & solder fittings (Inch & Metric)






































5240-08-06 see Copper tubes, coils & solder fittings (Inch & Metric)5240-10-06 see Copper tubes, coils & solder fittings (Inch & Metric)5240-10-08 see Copper tubes, coils & solder fittings (Inch & Metric)5240-108-89 see Copper tubes, coils & solder fittings (Inch & Metric)5240-12-06 see Copper tubes, coils & solder fittings (Inch & Metric)



_ 4 _


























5243-89-76 see Copper tubes, coils & solder fittings (Inch & Metric)525-F see Tube working tools525-F SP see Tube working tools5270-06 see Copper tubes, coils & solder fittings (Inch & Metric)5270-08 see Copper tubes, coils & solder fittings (Inch & Metric)





5270S-12 see Copper tubes, coils & solder fittings (Inch & Metric)5270S-15 see Copper tubes, coils & solder fittings (Inch & Metric)5270S-18 see Copper tubes, coils & solder fittings (Inch & Metric)5270S-22 see Copper tubes, coils & solder fittings (Inch & Metric)5270S-28 see Copper tubes, coils & solder fittings (Inch & Metric)

5270S-35 see Copper tubes, coils & solder fittings (Inch & Metric)5270S-42 see Copper tubes, coils & solder fittings (Inch & Metric)5270S-54 see Copper tubes, coils & solder fittings (Inch & Metric)5301-10 see Copper tubes, coils & solder fittings (Inch & Metric)5301-108 see Copper tubes, coils & solder fittings (Inch & Metric)



5301-64 see Copper tubes, coils & solder fittings (Inch & Metric)5301-67 see Copper tubes, coils & solder fittings (Inch & Metric)5301-76 see Copper tubes, coils & solder fittings (Inch & Metric)5301-89 see Copper tubes, coils & solder fittings (Inch & Metric)536-C02 see Evacuating and charging equipment

536-C02 see Service manifolds, gauges and charging hoses536-C16 see Evacuating and charging equipment536-C16 see Service manifolds, gauges and charging hoses536-C35 see Evacuating and charging equipment536-C35 see Service manifolds, gauges and charging hoses

540 see Inline components and accessories623-BC/247 see Service manifolds, gauges and charging hoses623-BC/410 see Service manifolds, gauges and charging hoses623-BC/447 see Service manifolds, gauges and charging hoses623-BPC see Service manifolds, gauges and charging hoses

623-WG see Service manifolds, gauges and charging hoses625-BC/247 see Service manifolds, gauges and charging hoses625-BC/410 see Service manifolds, gauges and charging hoses625-BC/447 see Service manifolds, gauges and charging hoses625-BPC see Service manifolds, gauges and charging hoses

625-WG see Service manifolds, gauges and charging hoses627-VRP see Evacuating and charging equipment627-VRP see Service manifolds, gauges and charging hoses66914 see Tube working tools66914 see Tube working tools

68481/TB see Tube working tools68481/TB see Tube working tools701501 see Tube working tools74760 see Tube working tools74770 see Tube working tools

75020 see Tube working tools75530 see Tube working tools75540 see Tube working tools77510 see Tube working tools77520 see Tube working tools

7885805 see Tube working tools7885805 see Tube working tools78931 see Tube working tools7899205 see Tube working tools7931805 see Tube working tools

7958301 see Service manifolds, gauges and charging hoses7958301 see Service manifolds, gauges and charging hoses7958301-HD see Service manifolds, gauges and charging hoses7958302 see Service manifolds, gauges and charging hoses7958302 see Service manifolds, gauges and charging hoses

7976105 see Tube working tools7976107 see Tube working tools800 see Copper tubes, coils & solder fittings (Inch & Metric)801000 see Copper tubes, coils & solder fittings (Inch & Metric)801001 see Copper tubes, coils & solder fittings (Inch & Metric)

801003 see Copper tubes, coils & solder fittings (Inch & Metric)801004 see Copper tubes, coils & solder fittings (Inch & Metric)801005 see Copper tubes, coils & solder fittings (Inch & Metric)801009 see Copper tubes, coils & solder fittings (Inch & Metric)801010 see Copper tubes, coils & solder fittings (Inch & Metric)














_ 5 _



























































_ 6 _

































804229 see Copper tubes, coils & solder fittings (Inch & Metric)804230 see Copper tubes, coils & solder fittings (Inch & Metric)804259 see Copper tubes, coils & solder fittings (Inch & Metric)804283 see Copper tubes, coils & solder fittings (Inch & Metric)8057205 see Tube working tools








808003 see Copper tubes, coils & solder fittings (Inch & Metric)808004 see Copper tubes, coils & solder fittings (Inch & Metric)808005 see Copper tubes, coils & solder fittings (Inch & Metric)8085105 see Tube working tools8085205 see Tube working tools






8201505 see Tube working tools823-B see Service manifolds, gauges and charging hoses823-BC see Service manifolds, gauges and charging hoses823-BC/247 see Service manifolds, gauges and charging hoses823-BC/27 see Service manifolds, gauges and charging hoses

823-BC/4 see Service manifolds, gauges and charging hoses823-BC/447 see Service manifolds, gauges and charging hoses823-BC/447-1.0 see Service manifolds, gauges and charging hoses823-BC-1.0 see Service manifolds, gauges and charging hoses823-BPC see Service manifolds, gauges and charging hoses

823-BPC/410 see Service manifolds, gauges and charging hoses823-BPC/410/27 see Service manifolds, gauges and charging hoses823-BPC/410-1.0 see Service manifolds, gauges and charging hoses823-C-B see Service manifolds, gauges and charging hoses823-C-BC see Service manifolds, gauges and charging hoses

823-C-BC/247 see Service manifolds, gauges and charging hoses823-C-BC/27 see Service manifolds, gauges and charging hoses823-C-BC/4 see Service manifolds, gauges and charging hoses823-C-BC/447 see Service manifolds, gauges and charging hoses823-C-BPC see Service manifolds, gauges and charging hoses

823-C-BPC/410 see Service manifolds, gauges and charging hoses823-C-BPC/410/27 see Service manifolds, gauges and charging hoses823-G-BC see Service manifolds, gauges and charging hoses823-G-BC/247 see Service manifolds, gauges and charging hoses823-G-BC/4 see Service manifolds, gauges and charging hoses

823-G-BC/447 see Service manifolds, gauges and charging hoses823-G-BPC see Service manifolds, gauges and charging hoses823-S-B see Service manifolds, gauges and charging hoses823-S-B see Service manifolds, gauges and charging hoses823-S-BC see Service manifolds, gauges and charging hoses

823-S-BC/247 see Service manifolds, gauges and charging hoses823-S-BC/27 see Service manifolds, gauges and charging hoses823-S-BC/4 see Service manifolds, gauges and charging hoses823-S-BC/447 see Service manifolds, gauges and charging hoses823-S-BC/447-1.0 see Service manifolds, gauges and charging hoses

823-S-BC-1.0 see Service manifolds, gauges and charging hoses823-S-BPC see Service manifolds, gauges and charging hoses823-S-BPC/410 see Service manifolds, gauges and charging hoses823-S-BPC/410/27 see Service manifolds, gauges and charging hoses823-S-BPC/410-1.0 see Service manifolds, gauges and charging hoses

823-WM-B see Service manifolds, gauges and charging hoses823-WM-BC see Service manifolds, gauges and charging hoses823-WM-BC/247 see Service manifolds, gauges and charging hoses823-WM-BC/27 see Service manifolds, gauges and charging hoses823-WM-BC/4 see Service manifolds, gauges and charging hoses

823-WM-BC/447 see Service manifolds, gauges and charging hoses823-WM-BPC see Service manifolds, gauges and charging hoses823-WM-BPC/410 see Service manifolds, gauges and charging hoses823-WM-BPC/410/27 see Service manifolds, gauges and charging hoses825-B see Service manifolds, gauges and charging hoses


825-BC/447-1.0 see Service manifolds, gauges and charging hoses825-BC-1.0 see Service manifolds, gauges and charging hoses825-BPC see Service manifolds, gauges and charging hoses825-BPC/410 see Service manifolds, gauges and charging hoses825-BPC/410/27 see Service manifolds, gauges and charging hoses

_ 7 _


825-BPC/410-1.0 see Service manifolds, gauges and charging hoses825-C-B see Service manifolds, gauges and charging hoses825-C-BC see Service manifolds, gauges and charging hoses825-C-BC/247 see Service manifolds, gauges and charging hoses825-C-BC/27 see Service manifolds, gauges and charging hoses

825-C-BC/4 see Service manifolds, gauges and charging hoses825-C-BC/447 see Service manifolds, gauges and charging hoses825-C-BPC see Service manifolds, gauges and charging hoses825-C-BPC/410 see Service manifolds, gauges and charging hoses825-C-BPC/410/27 see Service manifolds, gauges and charging hoses


825-S-B see Service manifolds, gauges and charging hoses825-S-BC see Service manifolds, gauges and charging hoses825-S-BC/247 see Service manifolds, gauges and charging hoses825-S-BC/27 see Service manifolds, gauges and charging hoses825-S-BC/4 see Service manifolds, gauges and charging hoses

825-S-BC/447 see Service manifolds, gauges and charging hoses825-S-BC/447-1.0 see Service manifolds, gauges and charging hoses825-S-BC-1.0 see Service manifolds, gauges and charging hoses825-S-BPC see Service manifolds, gauges and charging hoses825-S-BPC/410 see Service manifolds, gauges and charging hoses

825-S-BPC/410/27 see Service manifolds, gauges and charging hoses825-S-BPC/410-1.0 see Service manifolds, gauges and charging hoses825-WM-B see Service manifolds, gauges and charging hoses825-WM-BC see Service manifolds, gauges and charging hoses825-WM-BC/247 see Service manifolds, gauges and charging hoses

825-WM-BC/27 see Service manifolds, gauges and charging hoses825-WM-BC/4 see Service manifolds, gauges and charging hoses825-WM-BC/447 see Service manifolds, gauges and charging hoses825-WM-BPC see Service manifolds, gauges and charging hoses825-WM-BPC/410 see Service manifolds, gauges and charging hoses

825-WM-BPC/410/27 see Service manifolds, gauges and charging hoses827-VRP see Service manifolds, gauges and charging hoses840100 see Copper tubes, coils & solder fittings (Inch & Metric)840101 see Copper tubes, coils & solder fittings (Inch & Metric)840102 see Copper tubes, coils & solder fittings (Inch & Metric)




























840505 see Copper tubes, coils & solder fittings (Inch & Metric)84617-E/N see Service manifolds, gauges and charging hoses860110 see Copper tubes, coils & solder fittings (Inch & Metric)860111 see Copper tubes, coils & solder fittings (Inch & Metric)860121 see Copper tubes, coils & solder fittings (Inch & Metric)


861002 see Copper tubes, coils & solder fittings (Inch & Metric)861003 see Copper tubes, coils & solder fittings (Inch & Metric)861008 see Copper tubes, coils & solder fittings (Inch & Metric)861009 see Copper tubes, coils & solder fittings (Inch & Metric)86107 see Inline components and accessories

86109 see Inline components and accessories86111 see Inline components and accessories8694405 see Tube working tools8694405 see Tube working tools8921626-E see Service manifolds, gauges and charging hoses

8921626-E see Service manifolds, gauges and charging hoses93-S-03 see Tube working tools93-S-04 see Tube working tools93-S-05 see Tube working tools93-S-06 see Tube working tools

93-S-08 see Tube working tools93-S-10 see Tube working tools93-S-12 see Tube working tools93-S-14 see Tube working tools94-S see Tube working tools

95-S see Tube working toolsA01203 see Copper tubes, coils & solder fittings (Inch & Metric)A01211 see Copper tubes, coils & solder fittings (Inch & Metric)A01278 see Copper tubes, coils & solder fittings (Inch & Metric)A01366 see Copper tubes, coils & solder fittings (Inch & Metric)

A01392 see Copper tubes, coils & solder fittings (Inch & Metric)A01402 see Copper tubes, coils & solder fittings (Inch & Metric)A01409 see Copper tubes, coils & solder fittings (Inch & Metric)A01422 see Copper tubes, coils & solder fittings (Inch & Metric)A01431 see Copper tubes, coils & solder fittings (Inch & Metric)





A07816 see Copper tubes, coils & solder fittings (Inch & Metric)A07817 see Copper tubes, coils & solder fittings (Inch & Metric)A07819 see Copper tubes, coils & solder fittings (Inch & Metric)A-10971 see Tube working toolsA11205 see Copper tubes, coils & solder fittings (Inch & Metric)

A11206 see Copper tubes, coils & solder fittings (Inch & Metric)A11207 see Copper tubes, coils & solder fittings (Inch & Metric)A11216 see Copper tubes, coils & solder fittings (Inch & Metric)A11217 see Copper tubes, coils & solder fittings (Inch & Metric)A-3 see Automatic access valves & fittings

AA-HDS-36-B see Service manifolds, gauges and charging hosesAA-HDS-36-B/V see Service manifolds, gauges and charging hosesAA-HDS-36-R see Service manifolds, gauges and charging hosesAA-HDS-36-R/V see Service manifolds, gauges and charging hosesAA-HDS-36-Y see Service manifolds, gauges and charging hoses

AA-HDS-36-Y/V see Service manifolds, gauges and charging hosesAA-HDS-60-B see Service manifolds, gauges and charging hosesAA-HDS-60-B/V see Service manifolds, gauges and charging hosesAA-HDS-60-R see Service manifolds, gauges and charging hosesAA-HDS-60-R/V see Service manifolds, gauges and charging hoses

AA-HDS-60-Y see Service manifolds, gauges and charging hosesAA-HDS-60-Y/V see Service manifolds, gauges and charging hosesAA-HDS-72-B see Service manifolds, gauges and charging hosesAA-HDS-72-R see Service manifolds, gauges and charging hosesAA-HDS-72-Y see Service manifolds, gauges and charging hoses

AC-BP see Automatic access valves & fittingsAC-HP see Automatic access valves & fittingsACID-118 see Refrigeration accessoriesACK-001 see Fluid control componentsACK-003 see Fluid control components

ACK-004 see Fluid control componentsACK-004 see Fluid control componentsACK-004 see Fluid control componentsACK-004 see Fluid control componentsACK-004 see Fluid control components

ACK-004 see Fluid control componentsACK-004 see Fluid control componentsACK-005 see Fluid control componentsACK-005 see Fluid control componentsACK-007 see Fluid control components

ACK-007 see Fluid control componentsACK-007 see Fluid control componentsACK-008 see Fluid control componentsACK-008 see Fluid control componentsACT-6 see Tube working tools

ADP-0604 see Tube working toolsADP-0608 see Tube working toolsAG-100 see Refrigeration accessoriesAG-2 see Refrigeration accessoriesAM-05 see Fluid control components

_ 8 _


AM-10 see Fluid control componentsAM-25 see Fluid control componentsAM-HDS-36-B see Service manifolds, gauges and charging hosesAM-HDS-36-R see Service manifolds, gauges and charging hosesAM-HDS-36-Y see Service manifolds, gauges and charging hoses

AM-HDS-60-B see Service manifolds, gauges and charging hosesAM-HDS-60-R see Service manifolds, gauges and charging hosesAM-HDS-60-Y see Service manifolds, gauges and charging hosesAM-HDS-72-B see Service manifolds, gauges and charging hosesAM-HDS-72-R see Service manifolds, gauges and charging hoses

AMS-065 see Tube working toolsAMS-070 see Tube working toolsAMS-090 see Tube working toolsAMS-100 see Tube working toolsAMS-120 see Tube working tools

AMS-181 see Tube working toolsAP-1 see Automatic access valves & fittingsAP-2 see Automatic access valves & fittingsATC-30 see Refrigeration accessoriesATF-30 see Refrigeration accessories

ATK-4 see Refrigeration accessoriesATW-06-0 see Tube working toolsATW-2080 see Tube working toolsAV2-456 see Automatic access valves & fittingAV-34 see Automatic access valves & fitting

AV-46 see Automatic access valves & fittingAVC-6 see Automatic access valves & fittingAVCA-BP see Automatic access valves & fittingAVCA-HP see Automatic access valves & fittingAVC-GD see Automatic access valves & fitting

AVC-GD/HNBR see Automatic access valves & fittingAVC-HNBR see Automatic access valves & fittingAVCI-BP see Automatic access valves & fittingAVCI-HP see Automatic access valves & fittingAVC-JRA see Automatic access valves & fitting

AVC-NEO/TEFLON see Automatic access valves & fittingAVC-NEOPRENE see Automatic access valves & fittingAVU-04 see Automatic access valves & fittingAVU-24 see Automatic access valves & fittingAVU-44 see Automatic access valves & fitting

AVU-45 see Automatic access valves & fittingB1-04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"B1-06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"B1-08 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"B1-10 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

B1-12 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"B2-03 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"B2-04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"B2-05 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"B2-06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

B2-08 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"B2-10 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"B2-12 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"B-602 see Tube working toolsB-604 see Tube working tools

B-607 see Tube working toolsB-610 see Tube working toolsB-613 see Tube working toolsB-616 see Tube working toolsB-619 see Tube working tools






BB-9 see Refrigeration accessoriesBCV-05 see Fluid control componentsBCV-07 see Fluid control componentsBCV-09 see Fluid control componentsBCV-11 see Fluid control components

BCV-4-4 see Fluid control componentsBCV-4-6 see Fluid control componentsBE-24 see Tube working toolsBE-36 see Tube working toolsBE-48 see Tube working tools

BF-01 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"BF-02 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"BF-03 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"BF-04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"BF-06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

BF-08 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"BF-10 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"BF-12 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"BF-16 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"BF-20 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

BF-24 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"BF-28-154 see Refrigeration accessoriesBF-28-172 see Refrigeration accessoriesBF-28-200 see Refrigeration accessoriesBF-28-230 see Refrigeration accessories

BF-28-254 see Refrigeration accessoriesBF-28-300 see Refrigeration accessoriesBF-S-02 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"BF-S-03 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"BF-S-04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

BF-S-06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"BF-S-08 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"BF-S-10 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"BF-S-12 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"BF-S-16 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

BF-S-20 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"BH-1 see Tube working toolsBH-100 see Fluid control componentsBH-1000 see Fluid control componentsBH-150 see Fluid control components

BH-200 see Fluid control componentsBH-300 see Fluid control componentsBH-33 see Fluid control componentsBH-50 see Fluid control componentsBH-500 see Fluid control components

BH-750 see Fluid control componentsBLOCK-ITE see Refrigeration accessoriesBLT-024 see Fluid control componentsBLT-048 see Fluid control componentsBLT-100 see Fluid control components

BLUE-R-95 see Evacuating and charging equipmentBM-01 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"BM-02 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"BM-03 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"BM-04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

BM-06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"BM-08 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"BM-10 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"BM-12 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"BM-16 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

BM-20 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"BM-24 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"BS-02 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"BS-03 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"BS-04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

BS-06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"BS-08 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"BS-10 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"BS-101 see Tube working toolsBS-102-04 see Service manifolds, gauges and charging hoses

BS-102-04 see Tube working toolsBS-102-05/8mm see Tube working toolsBS-102-05/8mm see Tube working toolsBS-102-06 see Service manifolds, gauges and charging hosesBS-102-06 see Tube working tools

BS-102-06mm see Tube working toolsBS-102-08 see Service manifolds, gauges and charging hosesBS-102-08 see Tube working toolsBS-102-10 see Service manifolds, gauges and charging hosesBS-102-10 see Tube working tools

BS-102-10mm see Tube working toolsBS-102-12 see Service manifolds, gauges and charging hosesBS-102-12 see Tube working toolsBS-102-12mm see Tube working toolsBS-102-19mm see Tube working tools

BS-12 see Valves, fittings and tubesBS-163 see Tube working toolsBSG-104 see Fluid control componentsBSG-106 see Fluid control componentsBSG-108 see Fluid control components

BSG-110 see Fluid control componentsBSG-112 see Fluid control componentsBSG-116 see Fluid control componentsBSG-M2615 see Fluid control componentsBSG-M3615 see Fluid control components

BSG-M522 see Fluid control componentsBS-S-02 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"BS-S-03 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"BS-S-04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"BS-S-06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

BS-S-08 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"BS-S-10 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"BS-S-12 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"BS-S-16 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"BTV-1 see Automatic access valves & fittings

BTV-2 see Automatic access valves & fittingsBTV-3 see Automatic access valves & fittingsBVA-04B see Automatic access valves & fittingsBVA-04B see Fluid control componentsBVA-04R see Automatic access valves & fittings

BVA-04R see Fluid control componentsBVA-04Y see Automatic access valves & fittingsBVA-04Y see Fluid control componentsBVA-05-04B see Automatic access valves & fittingsBVA-05-04B see Fluid control components

BVA-05-04R see Automatic access valves & fittingsBVA-05-04R see Fluid control componentsBVA-05-04Y see Automatic access valves & fittingsBVA-05-04Y see Fluid control componentsBVA-06R see Automatic access valves & fittings

BVA-06R see Fluid control componentsBVS-02B see Automatic access valves & fittingsBVS-02B see Fluid control componentsBVS-02R see Automatic access valves & fittingsBVS-02R see Fluid control components

BVS-02Y see Automatic access valves & fittingsBVS-02Y see Fluid control componentsBVS-04-06B see Automatic access valves & fittingsBVS-04-06B see Fluid control componentsBVS-04-06R see Automatic access valves & fittings

BVS-04-06R see Fluid control componentsBVS-04-06Y see Automatic access valves & fittingsBVS-04-06Y see Fluid control componentsBVS-04B see Automatic access valves & fittingsBVS-04B see Fluid control components

BVS-04R see Automatic access valves & fittingsBVS-04R see Fluid control componentsBVS-04Y see Automatic access valves & fittingsBVS-04Y see Fluid control componentsBVS-05-04B see Automatic access valves & fittings

BVS-05-04B see Fluid control componentsBVS-05-04R see Automatic access valves & fittingsBVS-05-04R see Fluid control componentsBVS-05-04Y see Automatic access valves & fittingsBVS-05-04Y see Fluid control components

BVS-06B see Automatic access valves & fittingsBVS-06B see Fluid control componentsBVS-06B-M14 see Automatic access valves & fittingsBVS-06B-M14 see Fluid control componentsBVS-06R see Automatic access valves & fittings

BVS-06R see Fluid control componentsBVS-06Y see Automatic access valves & fittingsBVS-06Y see Fluid control componentsBVS-1/2-ACME/Y see Automatic access valves & fittingsBVS-1/2-ACME/Y see Fluid control components

BVS-1L see Electronic measurement and control instrumentsBVS-1L see Automatic access valves & fittingsBVS-1L-WS-005-1/4 SAE bottle + 1/4” SAEsee Electronic measurement and control instrumentsBVS-1L-WS-005-1/4 SAE bottle + 1/4” SAEsee Automatic access valves & fittingsBVS-1L-WS-005-5/16 SAE bottle + 1/4” SAE seeElectronic measurement and control instruments

BVS-1L-WS-005-5/16 SAE bottle + 1/4” SAE seeAutomatic access valves & fittingsBVS-1L-WS-005-7/16 SAE bottle + 1/4” SAE seeElectronic measurement and control instrumentsBVS-1L-WS-005-7/16 SAE bottle + 1/4” SAE seeAutomatic access valves & fittingsC1-04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"C1-06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

CA-06/24-50 see Copper tubes, coils & solder fittings (Inch & Metric)CA-06/30-50 see Copper tubes, coils & solder fittings (Inch & Metric)CA-07/18-03 see Copper tubes, coils & solder fittings (Inch & Metric)CA-07/20-03 see Copper tubes, coils & solder fittings (Inch & Metric)CA-08/24-50 see Copper tubes, coils & solder fittings (Inch & Metric)

CA-1 see Automatic access valves & fittingsCA-10/23-036 see Copper tubes, coils & solder fittings (Inch & Metric)CA-10/30-50 see Copper tubes, coils & solder fittings (Inch & Metric)CA-12/24-50 see Copper tubes, coils & solder fittings (Inch & Metric)CA-13/23-036 see Copper tubes, coils & solder fittings (Inch & Metric)

CA-13/23-30 see Copper tubes, coils & solder fittings (Inch & Metric)CA-15/30-50 see Copper tubes, coils & solder fittings (Inch & Metric)CA-16/31-036 see Copper tubes, coils & solder fittings (Inch & Metric)CA-20/30-50 see Copper tubes, coils & solder fittings (Inch & Metric)CA-20/40-50 see Copper tubes, coils & solder fittings (Inch & Metric)

CA-25/40-50 see Copper tubes, coils & solder fittings (Inch & Metric)CA-30/40-50 see Copper tubes, coils & solder fittings (Inch & Metric)CA-30/50-50 see Copper tubes, coils & solder fittings (Inch & Metric)CA-5PAK see Copper tubes, coils & solder fittings (Inch & Metric)CAP-RT08 see Fluid control components

CAP-RT10 see Fluid control componentsCAP-RT14 see Fluid control componentsCARD see Tube working toolsCD-02 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CD-03 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

CD-04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CD-06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CD-08 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CD-10 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CD-12 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

_ 9 _


CDR-03-02 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CDR-04-03 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CDR-06-03 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CDR-06-04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CDR-08-06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

CDR-10-08 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CDR-12-10 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CDR-16-10 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CDR-16-12 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CFF-45-02 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

CFF-45-03 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CFF-45-04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CFF-45-06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CFF-45-08 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CFF-45-10 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

CFF-90-02 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CFF-90-03 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CFF-90-04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CFF-90-06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CFF-90-08 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

CFF-90-10 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CFF-90-12 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CFF-90-16 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CFF-S-45-02 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CFF-S-45-03 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

CFF-S-45-04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CFF-S-45-06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CFF-S-45-08 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CFF-S-45-10 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CFF-S-45-12 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"



CFF-S-90-16 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CFF-S-90-20 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CFF-S-90-24 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CH-101 see Refrigeration accessoriesCH-102 see Refrigeration accessories

CH-103 see Refrigeration accessoriesCH-105 see Refrigeration accessoriesCH-135 see Refrigeration accessoriesCH-197 see Refrigeration accessoriesCH-20 see Service manifolds, gauges and charging hoses

CIT-080L see Electronic measurement and control instrumentsCIT-080S see Electronic measurement and control instrumentsCIT-120L see Electronic measurement and control instrumentsCIT-120S see Electronic measurement and control instrumentsCLASS »1.0« MANIFOLDS seeService manifolds, gauges and charging hoses

CLIMEX see Inline components and accessoriesCMF-90-02 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CMF-90-03 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CMF-90-04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CMF-90-06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

CMF-90-08 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CMF-90-10 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CMT-080 see Electronic measurement and control instrumentsCMT-120 see Electronic measurement and control instrumentsCO-04I see Copper tubes, coils & solder fittings (Inch & Metric)

CO-04I see Copper tubes, coils & solder fittings (Inch & Metric)CO-05I see Copper tubes, coils & solder fittings (Inch & Metric)CO-06I see Copper tubes, coils & solder fittings (Inch & Metric)CO-06I see Copper tubes, coils & solder fittings (Inch & Metric)CO-08I see Copper tubes, coils & solder fittings (Inch & Metric)

CO-08I see Copper tubes, coils & solder fittings (Inch & Metric)CO-10I see Copper tubes, coils & solder fittings (Inch & Metric)CO-12I see Copper tubes, coils & solder fittings (Inch & Metric)CO-14I see Copper tubes, coils & solder fittings (Inch & Metric)COI-2OZ see Electronic measurement and control instruments

COI-2OZ see Evacuating and charging equipmentCOV-024 see Fluid control componentsCOV-048 see Fluid control componentsCOV-100 see Fluid control componentsCR4-220 see Electronic measurement and control instruments

CR4-220/KPP see Electronic measurement and control instrumentsCR4-220/KTH see Electronic measurement and control instrumentsCR4-220/KTH see Electronic measurement and control instrumentsCR4-220/KTP see Electronic measurement and control instrumentsCR4-220/KTT see Electronic measurement and control instruments

CR87-10 see Electronic measurement and control instrumentsCR87-14 see Electronic measurement and control instrumentsCR87-16 see Electronic measurement and control instrumentsCR87-17 see Electronic measurement and control instrumentsCR87-18 see Electronic measurement and control instruments

CR87-22 see Electronic measurement and control instrumentsCR87B-220C see Electronic measurement and control instrumentsCR87-S22 see Electronic measurement and control instrumentsCR87-S30 see Electronic measurement and control instrumentsCR87-SL3 see Electronic measurement and control instruments

CRISTAL CLEAR see Service manifolds, gauges and charging hosesCRISTAL CLEAR see Service manifolds, gauges and charging hosesCRPEN see Electronic measurement and control instrumentsCRPENB see Electronic measurement and control instrumentsCRPENB see Electronic measurement and control instruments

CRPENR see Electronic measurement and control instrumentsCRPENR see Electronic measurement and control instrumentsCRX-02 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CRX-03 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CRX-04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

CRX-06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CRX-08 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CRX-10 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CRX-12 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CRX-S-02 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

CRX-S-03 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CRX-S-04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CRX-S-06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CRX-S-08 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CRX-S-10 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

CRX-S-12 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CRX-S-16 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CRX-S-20 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CRX-S-24 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"CSL-144-S see Fluid control components

CSL-145-S see Fluid control componentsCSL-146-S see Fluid control componentsCSL-147-S see Fluid control componentsCSL-149-S see Fluid control componentsCST-080 see Electronic measurement and control instruments

CST-120 see Electronic measurement and control instrumentsCT-34 see Service manifolds, gauges and charging hosesCT-ACP see Refrigeration accessoriesCTP-1 see Tube working toolsCV-1G see Automatic access valves & fittings

CV-2G see Automatic access valves & fittingsCV-3G see Automatic access valves & fittingsCW08-22 see Tube working toolsCW08-32 see Tube working toolsCW10-22 see Tube working tools

D02050 see Copper tubes, coils & solder fittings (Inch & Metric)D03050 see Copper tubes, coils & solder fittings (Inch & Metric)D04050 see Copper tubes, coils & solder fittings (Inch & Metric)D05050 see Copper tubes, coils & solder fittings (Inch & Metric)D06050 see Copper tubes, coils & solder fittings (Inch & Metric)

D08050 see Copper tubes, coils & solder fittings (Inch & Metric)D-1 (WS-33) see Refrigeration accessoriesD10050 see Copper tubes, coils & solder fittings (Inch & Metric)D12050 see Copper tubes, coils & solder fittings (Inch & Metric)D14050 see Copper tubes, coils & solder fittings (Inch & Metric)

D18050 see Copper tubes, coils & solder fittings (Inch & Metric)D22050 see Copper tubes, coils & solder fittings (Inch & Metric)D26050 see Copper tubes, coils & solder fittings (Inch & Metric)DB-009 see Refrigeration accessoriesDB-061 see Refrigeration accessories

DB-152 see Refrigeration accessoriesDB-157 see Refrigeration accessoriesDB-162 see Refrigeration accessoriesDC-5150 see Tube working toolsDETEX see Refrigeration accessories

DGT-1415C see Electronic measurement and control instrumentsDHC-06x09 mm see Refrigeration accessoriesDHC-06x09/1M see Refrigeration accessoriesDLC-040 see Electronic measurement and control instrumentsDLC-040-E see Electronic measurement and control instruments

DLC-052 see Electronic measurement and control instrumentsDLC-060 see Electronic measurement and control instrumentsDLC-080 see Electronic measurement and control instrumentsDLC-080-E see Electronic measurement and control instrumentsDLC-120 see Electronic measurement and control instruments

DLC-120-E see Electronic measurement and control instrumentsDLC-160 see Electronic measurement and control instrumentsDLC-160-E see Electronic measurement and control instrumentsDLC-200 see Electronic measurement and control instrumentsDLC-240 see Electronic measurement and control instruments

DLC-240-E see Electronic measurement and control instrumentsDLC-320 see Electronic measurement and control instrumentsDLC-360 see Electronic measurement and control instrumentsDLC-400 see Electronic measurement and control instrumentsDM-120C see Electronic measurement and control instruments

DM-1676 see Fluid control componentsDM-1677 see Fluid control componentsDM-1678 see Fluid control componentsDM-1679 see Fluid control componentsDMF-S-02 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

DMF-S-03 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"DMF-S-04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"DMF-S-06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"DMF-S-08 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"DMF-S-10 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

DMF-S-12 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"DMF-S-16 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"DMF-S-20 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"DMF-S-24 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"DPS-300C see Electronic measurement and control instruments

DS/O-12 see Evacuating and charging equipmentDS/O-134/6 see Evacuating and charging equipmentDT-1001C see Electronic measurement and control instrumentsDT-1630 see Electronic measurement and control instrumentsDT-50 see Refrigeration accessories

DTH-1628 see Electronic measurement and control instrumentsE-05 see Tube working toolsE-06 see Tube working toolsE-08 see Tube working toolsE-10 see Tube working tools

E1-03A see Forged brass & steel fittings "NPT" & "NPT 45° SAE"E1-04A see Forged brass & steel fittings "NPT" & "NPT 45° SAE"E1-04B see Forged brass & steel fittings "NPT" & "NPT 45° SAE"E1-04C see Forged brass & steel fittings "NPT" & "NPT 45° SAE"E1-05B see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

E1-06A see Forged brass & steel fittings "NPT" & "NPT 45° SAE"E1-06B see Forged brass & steel fittings "NPT" & "NPT 45° SAE"E1-06C see Forged brass & steel fittings "NPT" & "NPT 45° SAE"E1-06D see Forged brass & steel fittings "NPT" & "NPT 45° SAE"E1-08B see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

E1-08C see Forged brass & steel fittings "NPT" & "NPT 45° SAE"E1-08D see Forged brass & steel fittings "NPT" & "NPT 45° SAE"E1-08E see Forged brass & steel fittings "NPT" & "NPT 45° SAE"E1-10C see Forged brass & steel fittings "NPT" & "NPT 45° SAE"E1-10D see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

E1-10E see Forged brass & steel fittings "NPT" & "NPT 45° SAE"E1-12D see Forged brass & steel fittings "NPT" & "NPT 45° SAE"E1-12E see Forged brass & steel fittings "NPT" & "NPT 45° SAE"E2-04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"E2-06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

E2-08 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"E2-10 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"E2-12 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"E303-FT-036 see Service manifolds, gauges and charging hosesE303-FT-036 see Service manifolds, gauges and charging hoses

E303-FT-036 see Service manifolds, gauges and charging hosesE303-FT-048 see Service manifolds, gauges and charging hosesE303-FT-060 see Service manifolds, gauges and charging hosesE303-FT-072 see Service manifolds, gauges and charging hosesE303-FT-120 see Service manifolds, gauges and charging hoses

E3-04A see Forged brass & steel fittings "NPT" & "NPT 45° SAE"E3-04B see Forged brass & steel fittings "NPT" & "NPT 45° SAE"E3-05B see Forged brass & steel fittings "NPT" & "NPT 45° SAE"E3-06A see Forged brass & steel fittings "NPT" & "NPT 45° SAE"E3-06B see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

E3-06C see Forged brass & steel fittings "NPT" & "NPT 45° SAE"E3-06D see Forged brass & steel fittings "NPT" & "NPT 45° SAE"E3-08C see Forged brass & steel fittings "NPT" & "NPT 45° SAE"E3-08D see Forged brass & steel fittings "NPT" & "NPT 45° SAE"E3120-FTB see Service manifolds, gauges and charging hoses

E3120-FTR see Service manifolds, gauges and charging hosesE3120-FTY see Service manifolds, gauges and charging hosesE314-FTY see Service manifolds, gauges and charging hosesE3-25D see Forged brass & steel fittings "NPT" & "NPT 45° SAE"E336-FTB see Service manifolds, gauges and charging hoses

E336-FTR see Service manifolds, gauges and charging hosesE336-FTY see Service manifolds, gauges and charging hosesE348-FTB see Service manifolds, gauges and charging hosesE348-FTR see Service manifolds, gauges and charging hosesE348-FTY see Service manifolds, gauges and charging hoses

E360-FTB see Service manifolds, gauges and charging hosesE360-FTR see Service manifolds, gauges and charging hosesE360-FTY see Service manifolds, gauges and charging hosesE372-FTB see Service manifolds, gauges and charging hosesE372-FTR see Service manifolds, gauges and charging hoses

E372-FTY see Service manifolds, gauges and charging hosesE4-44 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"E4-66 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"E4-88 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"E5120-FTY see Service manifolds, gauges and charging hoses

E536-FTY see Service manifolds, gauges and charging hosesE548-FTY see Service manifolds, gauges and charging hosesE560-FTY see Service manifolds, gauges and charging hosesE572-FTY see Service manifolds, gauges and charging hosesEA-208A/V2 see Electronic measurement and control instruments

EB-06 see Tube working toolsEB-08 see Tube working toolsEB-10 see Tube working toolsEC-56 see Tube working toolsEC-810 see Tube working tools

EE-30 see Tube working toolsEE-48 see Tube working toolsEH-1 see Tube working toolsEPOXY-GUM see Refrigeration accessoriesER2-0064 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

ER2-0084 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"ER2-0086 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"ER2-0108 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"ES4-0044 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"ES4-0066 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

ES4-0088 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"ES4-1010 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"ES4-1212 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"FB-11 see Tube working toolsFB-2 see Tube working tools

_ 10 _


FB-3 see Tube working toolsFB-4 see Tube working toolsFB-5 see Tube working toolsFB-6 see Tube working toolsFB-7 see Tube working tools

FB-8 see Tube working toolsFB-9 see Tube working toolsFC-351 see Tube working toolsFCB-353 see Tube working toolsFCG-607B see Electronic measurement and control instruments

FCG-607R see Electronic measurement and control instrumentsFCHS-6 see Tube working toolsFCS-6 see Tube working toolsFCT-1 see Service manifolds, gauges and charging hosesFCT-2059 see Service manifolds, gauges and charging hoses

FCT-2059-050SA see Service manifolds, gauges and charging hosesFCT-2059-050SS see Service manifolds, gauges and charging hosesFCT-2059-1000 see Service manifolds, gauges and charging hosesFCT-2059-100SA see Service manifolds, gauges and charging hosesFCT-2059-100SS see Service manifolds, gauges and charging hoses

FCT-2059-150SA see Service manifolds, gauges and charging hosesFCT-2059-150SS see Service manifolds, gauges and charging hosesFCT-2059-200SA see Service manifolds, gauges and charging hosesFCT-2059-200SS see Service manifolds, gauges and charging hosesFCT-2059-5000 see Service manifolds, gauges and charging hoses

FCT-4082B-050SA see Service manifolds, gauges and charging hosesFCT-4082B-050SS see Service manifolds, gauges and charging hosesFCT-4082B-1000 see Service manifolds, gauges and charging hosesFCT-4082B-100SA see Service manifolds, gauges and charging hosesFCT-4082B-100SS see Service manifolds, gauges and charging hoses

FCT-4082B-150SA see Service manifolds, gauges and charging hosesFCT-4082B-150SS see Service manifolds, gauges and charging hosesFCT-4082B-200SA see Service manifolds, gauges and charging hosesFCT-4082B-200SS see Service manifolds, gauges and charging hosesFCT-4082B-5000 see Service manifolds, gauges and charging hoses

FCT-FA-2059 see Service manifolds, gauges and charging hosesFCT-FNB-2059 see Service manifolds, gauges and charging hosesFCT-FNR-2059 see Service manifolds, gauges and charging hosesFCT-FS-2059 see Service manifolds, gauges and charging hosesFCT-FT-2059 see Service manifolds, gauges and charging hoses

FCT-RFA-4082 see Service manifolds, gauges and charging hosesFCT-RFS-4082 see Service manifolds, gauges and charging hosesFCT-SET-2059C see Service manifolds, gauges and charging hosesFLUX-1802-D see Copper tubes, coils & solder fittings (Inch & Metric)FLUX-1802-PF see Copper tubes, coils & solder fittings (Inch & Metric)

FLUX-800-D see Copper tubes, coils & solder fittings (Inch & Metric)FPA-168 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"FPA-210 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"FPA-283 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"FPB-168 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

FPB-210 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"FPB-283 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"FPC-168 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"FPC-210 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"FPC-283 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

FSBC-M6 see Copper tubes, coils & solder fittings (Inch & Metric)FSBC-M8 see Copper tubes, coils & solder fittings (Inch & Metric)FSCC-0507 see Copper tubes, coils & solder fittings (Inch & Metric)FSCC-0507-R see Copper tubes, coils & solder fittings (Inch & Metric)FSCC-0710 see Copper tubes, coils & solder fittings (Inch & Metric)

FSCC-0710-R see Copper tubes, coils & solder fittings (Inch & Metric)FSCC-1113 see Copper tubes, coils & solder fittings (Inch & Metric)FSCC-1113-R see Copper tubes, coils & solder fittings (Inch & Metric)FSCC-1315 see Copper tubes, coils & solder fittings (Inch & Metric)FSCC-1315-R see Copper tubes, coils & solder fittings (Inch & Metric)

FSCC-1619 see Copper tubes, coils & solder fittings (Inch & Metric)FSCC-1619-R see Copper tubes, coils & solder fittings (Inch & Metric)FSCC-2022 see Copper tubes, coils & solder fittings (Inch & Metric)FSCC-2022-R see Copper tubes, coils & solder fittings (Inch & Metric)FSCC-2528 see Copper tubes, coils & solder fittings (Inch & Metric)


FSCC-5255 see Copper tubes, coils & solder fittings (Inch & Metric)FSCC-5255-R see Copper tubes, coils & solder fittings (Inch & Metric)FSCC-5864 see Copper tubes, coils & solder fittings (Inch & Metric)FSCC-5864-R see Copper tubes, coils & solder fittings (Inch & Metric)FSCC-6571 see Copper tubes, coils & solder fittings (Inch & Metric)


FSCC-98107 see Copper tubes, coils & solder fittings (Inch & Metric)FSCC-98107-R see Copper tubes, coils & solder fittings (Inch & Metric)FSCO-3550 see Copper tubes, coils & solder fittings (Inch & Metric)FSCO-3575 see Copper tubes, coils & solder fittings (Inch & Metric)FSEC-3419 see Copper tubes, coils & solder fittings (Inch & Metric)

FSEC-3535 see Copper tubes, coils & solder fittings (Inch & Metric)FSNK-30M10 see Copper tubes, coils & solder fittings (Inch & Metric)FSNK-30M8 see Copper tubes, coils & solder fittings (Inch & Metric)FSN-M10 see Copper tubes, coils & solder fittings (Inch & Metric)FSN-M8 see Copper tubes, coils & solder fittings (Inch & Metric)

FSP2-3419 see Copper tubes, coils & solder fittings (Inch & Metric)FSP3-3535 see Copper tubes, coils & solder fittings (Inch & Metric)FST-275 see Service manifolds, gauges and charging hosesFST-275 see Tube working toolsFST-275-C see Tube working tools

FST-275-M see Tube working toolsFST-450 see Tube working toolsFST-450M see Tube working toolsFSTR-1M6 see Copper tubes, coils & solder fittings (Inch & Metric)FSTR-1M8 see Copper tubes, coils & solder fittings (Inch & Metric)

FT-195 see Tube working toolsFT-220 see Tube working toolsFT-220-B see Tube working toolsFT-500 see Tube working toolsFT-500-M see Service manifolds, gauges and charging hoses

FT-500-M see Tube working toolsFT-525 see Tube working toolsFT-525 see Service manifolds, gauges and charging hosesFT-525/C see Tube working toolsFTE-080 see Tube working tools

FTE-080-M see Tube working toolsFTE-089 see Tube working toolsFTE-089-A see Tube working toolsFTE-800 see Tube working toolsFTE-800-IM see Tube working tools

FTE-800-IMTRW see Tube working toolsFTE-800-IMTRWS see Tube working toolsFTE-800-IMTRWSP see Tube working toolsFTE-800-ITRWSP see Tube working toolsFTE-800-M see Tube working tools

G3F see Tube working toolsGCHS see Tube working toolsGHNBR-06 see Tube working toolsGHNBR-08 see Tube working toolsGHNBR-10 see Tube working tools

GHNBR-12 see Tube working toolsGL-050 see Copper tubes, coils & solder fittings (Inch & Metric)GL-250 see Copper tubes, coils & solder fittings (Inch & Metric)GLD-237 see Refrigeration accessoriesGLD-3790 see Refrigeration accessories

GLD-947 see Refrigeration accessoriesGRT-143 see Fluid control componentsGRT-191 see Fluid control componentsGRT-254 see Fluid control componentsGRT-318 see Fluid control components

GRT-381 see Fluid control componentsGRT-510 see Fluid control componentsGS-100 see Copper tubes, coils & solder fittings (Inch & Metric)GS-100 see Copper tubes, coils & solder fittings (Inch & Metric)GSK-024 see Fluid control components

GSK-048 see Fluid control componentsGSK-100 see Fluid control componentsGSLC see Tube working toolsGSPK-04 see Tube working toolsGSPK-P4 see Tube working tools

H-08 mm see Tube working toolsH-1 see Tube working toolsH-1/2 see Tube working toolsH-3/4 see Tube working toolsH-3/8 see Tube working tools

H-5/8 see Tube working toolsH-7/8 see Tube working toolsH-11/8 see Tube working toolsH-13/8 see Tube working toolsH-15/8 see Tube working tools

H-10 mm see Tube working toolsH-100 see Inline components and accessoriesH-12 mm see Service manifolds, gauges and charging hosesH-12 mm see Tube working toolsH-15 mm see Service manifolds, gauges and charging hoses

H-15 mm see Tube working toolsH-150 see Fluid control componentsH-16 mm see Tube working toolsH-18 mm see Service manifolds, gauges and charging hosesH-18 mm see Tube working tools

H-20 mm see Tube working toolsH-200 see Fluid control componentsH-22 mm see Service manifolds, gauges and charging hosesH-22 mm see Tube working toolsH-28 mm see Service manifolds, gauges and charging hoses

H-28 mm see Tube working toolsH-300 see Fluid control componentsH-35 mm see Tube working toolsH-42 mm see Tube working toolsH-75 see Fluid control components

H-750 see Fluid control componentsHB-251 see Tube working toolsHB-251M see Tube working toolsHB-451 see Tube working toolsHB-451M see Tube working tools

HC-221-1 see Electronic measurement and control instrumentsHC-221-10 see Electronic measurement and control instrumentsHC-221-5 see Electronic measurement and control instrumentsHC-221-50 see Electronic measurement and control instrumentsHC-234-1 see Electronic measurement and control instruments

HC-2341-1 see Electronic measurement and control instrumentsHC-2341-150 see Electronic measurement and control instrumentsHC-234-150 see Electronic measurement and control instrumentsHC-2341-50 see Electronic measurement and control instrumentsHC-234-50 see Electronic measurement and control instruments

HCT-212 see Tube working toolsHCT-B see Tube working toolsHCTK-239 see Electronic measurement and control instrumentsHCT-P see Tube working toolsHCT-S see Tube working tools

HDA-120-B see Service manifolds, gauges and charging hosesHDA-120-R see Service manifolds, gauges and charging hosesHDA-120-Y see Service manifolds, gauges and charging hosesHDA-36-B see Service manifolds, gauges and charging hosesHDA-36-R see Service manifolds, gauges and charging hoses

HDA-36-R/410 see Service manifolds, gauges and charging hosesHDA-36-Y see Service manifolds, gauges and charging hosesHDA-36-Y/410 see Service manifolds, gauges and charging hosesHDA-60-B see Service manifolds, gauges and charging hosesHDA-60-R see Service manifolds, gauges and charging hoses

HDA-60-R/410 see Service manifolds, gauges and charging hosesHDA-60-Y see Service manifolds, gauges and charging hosesHDA-60-Y/410 see Service manifolds, gauges and charging hosesHDA-72-B see Service manifolds, gauges and charging hosesHDA-72-R see Service manifolds, gauges and charging hoses

HDA-72-Y see Service manifolds, gauges and charging hosesHDCS-36-B/410/V see Service manifolds, gauges and charging hosesHDCS-36-R/410/V see Service manifolds, gauges and charging hosesHDS-120-B/V see Service manifolds, gauges and charging hosesHDS-120-R/V see Service manifolds, gauges and charging hoses

HDS-120-Y/V see Service manifolds, gauges and charging hosesHDS-12-B/V see Service manifolds, gauges and charging hosesHDS-12-R see Service manifolds, gauges and charging hosesHDS-12-R/V see Service manifolds, gauges and charging hosesHDS-12-Y see Service manifolds, gauges and charging hoses

HDS-12-Y/V see Service manifolds, gauges and charging hosesHDS-36-B/V see Service manifolds, gauges and charging hosesHDS-36-R/V see Service manifolds, gauges and charging hosesHDS-36-R/V see Service manifolds, gauges and charging hosesHDS-36-Y/V see Service manifolds, gauges and charging hoses

HDS-60-B/V see Service manifolds, gauges and charging hosesHDS-60-R/V see Service manifolds, gauges and charging hosesHDS-60-Y/V see Evacuating and charging equipmentHDS-60-Y/V see Evacuating and charging equipmentHDS-60-Y/V see Service manifolds, gauges and charging hoses

HDS6-12-B/V see Service manifolds, gauges and charging hosesHDS6-12-R/V see Service manifolds, gauges and charging hosesHDS6-12-Y/V see Service manifolds, gauges and charging hosesHDS6-36-B see Service manifolds, gauges and charging hosesHDS6-36-B/V see Service manifolds, gauges and charging hoses

HDS6-36-R see Service manifolds, gauges and charging hosesHDS6-36-R/V see Service manifolds, gauges and charging hosesHDS6-36-Y see Service manifolds, gauges and charging hosesHDS6-36-Y/V see Service manifolds, gauges and charging hosesHDS6-60-B see Service manifolds, gauges and charging hoses

HDS6-60-B/V see Service manifolds, gauges and charging hosesHDS6-60-R see Service manifolds, gauges and charging hosesHDS6-60-R/V see Service manifolds, gauges and charging hosesHDS6-60-Y see Service manifolds, gauges and charging hosesHDS6-60-Y/V see Service manifolds, gauges and charging hoses

HDS6-72-B see Service manifolds, gauges and charging hosesHDS6-72-B/V see Service manifolds, gauges and charging hosesHDS6-72-R see Service manifolds, gauges and charging hosesHDS6-72-R/V see Service manifolds, gauges and charging hosesHDS6-72-Y see Service manifolds, gauges and charging hoses

HDS6-72-Y/V see Service manifolds, gauges and charging hosesHDS-72-B/V see Service manifolds, gauges and charging hosesHDS-72-R/V see Service manifolds, gauges and charging hosesHDS-72-Y/V see Service manifolds, gauges and charging hosesHER-319 see Fluid control components

HNS4-04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"HNS4-06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"HNS4-08 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"HNS4-10 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"HNS4-12 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

HP-3700 see Fluid control componentsHP-3701 see Fluid control componentsHP-3702 see Fluid control componentsHP-3703 see Fluid control componentsHP-3704 see Fluid control components

HP-3706 see Fluid control componentsHP-3738 see Fluid control componentsHPBV-04P see Fluid control componentsHPBV-06MMP see Fluid control componentsHPBV-06P see Fluid control components

HPBV-08P see Fluid control componentsHPBV-10MMP see Fluid control componentsHPBV-10P see Fluid control componentsHPBV-12MMP see Fluid control componentsHPBV-12P see Fluid control components

HPBV-14P see Fluid control componentsHPBV-16MMP see Fluid control componentsHPBV-18P see Fluid control componentsHPBV-19MMP see Fluid control componentsHPBV-22MMP see Fluid control components

_ 11 _


HPBV-22P see Fluid control componentsHPBV-26P see Fluid control componentsHPBV-28MMP see Fluid control componentsHPBV-34P see Fluid control componentsHPBV-35MMP see Fluid control components

HPBV-42MMP see Fluid control componentsHPBV-42P see Fluid control componentsHPBV-50P see Fluid control componentsHPBV-54MMP see Fluid control componentsHPN see Tube working tools

HT-680A see Electronic measurement and control instrumentsHWS-8 see Tube working toolsHWS-8mm see Tube working toolsHX-3639 see Fluid control componentsHX-3640 see Fluid control components

HX-3641 see Fluid control componentsHX-3702 see Fluid control componentsHX-3703 see Fluid control componentsHX-3738 see Fluid control componentsHX-3810 see Fluid control components

HX-3836 see Fluid control componentsHX-3839 see Fluid control componentsHX-3840 see Fluid control componentsHX-3841 see Fluid control componentsICE-125 see Refrigeration accessories

ICG-220 see Refrigeration accessoriesIMS-10 see Tube working toolsIMS-11 see Tube working toolsIMS-12 see Tube working toolsIMS-13 see Tube working tools

IMS-14 see Tube working toolsIMS-15 see Tube working toolsIMS-16 see Tube working toolsIMS-17 see Tube working toolsIMS-18 see Tube working tools

IMS-19 see Tube working toolsIMS-4D-37 see Tube working toolsINC-100-05 see Fluid control componentsINC-100-08 see Fluid control componentsINC-200-11 see Fluid control components

INC-300-14 see Fluid control componentsINC-300-17 see Fluid control componentsINC-300-22 see Fluid control componentsINC-400-27 see Fluid control componentsINC-500-31 see Fluid control components

INJEC see Electronic measurement and control instrumentsINJEC see Evacuating and charging equipmentINSUL TAPE see Copper tubes, coils & solder fittings (Inch & Metric)INT-024 see Fluid control componentsINT-300 see Fluid control components

INT-400 see Fluid control componentsIPD-0406 see Copper tubes, coils & solder fittings (Inch & Metric)IPD-0408 see Copper tubes, coils & solder fittings (Inch & Metric)IPD-0410 see Copper tubes, coils & solder fittings (Inch & Metric)IPD-0608 see Copper tubes, coils & solder fittings (Inch & Metric)

IPD-0610 see Copper tubes, coils & solder fittings (Inch & Metric)IPD-0612 see Copper tubes, coils & solder fittings (Inch & Metric)IPD-0812 see Copper tubes, coils & solder fittings (Inch & Metric)IPS-04 see Copper tubes, coils & solder fittings (Inch & Metric)IPS-05 see Copper tubes, coils & solder fittings (Inch & Metric)

IPS-06 see Copper tubes, coils & solder fittings (Inch & Metric)IPS-08 see Copper tubes, coils & solder fittings (Inch & Metric)IPS-10 see Copper tubes, coils & solder fittings (Inch & Metric)IPS-12 see Copper tubes, coils & solder fittings (Inch & Metric)IPS-14 see Copper tubes, coils & solder fittings (Inch & Metric)

IRT-7920 see Electronic measurement and control instrumentsITE-3700 see Electronic measurement and control instrumentsITE-50V see Service manifolds, gauges and charging hosesITE-54V see Service manifolds, gauges and charging hosesITE-8010 see Electronic measurement and control instruments

ITE-8015 see Electronic measurement and control instrumentsITE-8030 see Electronic measurement and control instrumentsITE-8060 see Electronic measurement and control instrumentsITE-8090 see Electronic measurement and control instrumentsITE-8806B see Electronic measurement and control instruments

ITE-8900A see Electronic measurement and control instrumentsITE-8909 see Electronic measurement and control instrumentsITE-H10PM see Electronic measurement and control instrumentsITE-XTRA see Electronic measurement and control instrumentsITE-XTRA-2 see Electronic measurement and control instruments

K1-01 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"K1-03 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"K1-05 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"K1-08 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"K1-10 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

K1-11 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"K1-12 see Evacuating and charging equipmentK1-12 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"K1-13 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"K1-D see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

K1-E see Forged brass & steel fittings "NPT" & "NPT 45° SAE"KCK-F see Automatic access valves & fittingsKCK-M see Automatic access valves & fittingsKIT-905 see Electronic measurement and control instrumentsKIT-906 see Electronic measurement and control instruments

KIT-908 see Electronic measurement and control instrumentsL-11509 see Refrigeration accessoriesL-11513 see Refrigeration accessoriesL-11575 see Service manifolds, gauges and charging hosesL-11575 see Refrigeration accessories

L-22101 see Service manifolds, gauges and charging hosesL-36473 see Refrigeration accessoriesL-41600 see Refrigeration accessoriesL-49050 see Refrigeration accessoriesLEAK-118 see Refrigeration accessories

LEAK-40 see Refrigeration accessoriesLEAK-474 see Refrigeration accessoriesLEAK-TEFLON-40 see Refrigeration accessoriesLG-712 see Fluid control componentsLP-4 see Evacuating and charging equipment

LRV-1018 see Fluid control componentsLRV-1039 see Fluid control componentsLRV-1092 see Fluid control componentsLT-10G see Automatic access valves & fittingsLT-3G see Automatic access valves & fittings

LT-4G see Automatic access valves & fittingsLT-5G see Automatic access valves & fittingsLT-6G see Automatic access valves & fittingsLT-8G see Automatic access valves & fittingsLTC-1 see Service manifolds, gauges and charging hoses

M-02 see Fluid control componentsM-03 see Fluid control componentsM-05 see Fluid control componentsM-10 see Fluid control componentsM-110 see Fluid control components

M-15 see Fluid control componentsM-20 see Fluid control componentsM2-106 see Service manifolds, gauges and charging hosesM2-108 see Service manifolds, gauges and charging hosesM2-12MHH see Service manifolds, gauges and charging hoses

M2-14 see Service manifolds, gauges and charging hosesM2-16 see Service manifolds, gauges and charging hosesM2-16-B see Service manifolds, gauges and charging hosesM2-16-B2 see Service manifolds, gauges and charging hosesM2-16-HB see Service manifolds, gauges and charging hoses

M2-16-HH see Service manifolds, gauges and charging hosesM2-16-HHB see Service manifolds, gauges and charging hosesM2-16-HR see Service manifolds, gauges and charging hosesM2-16-M see Service manifolds, gauges and charging hosesM2-16-N see Service manifolds, gauges and charging hoses

M2-16-P see Service manifolds, gauges and charging hosesM-30 see Fluid control componentsM-60 see Fluid control componentsM-80 see Fluid control componentsMAPP GAS see Tube working tools

MARC-15/U see Evacuating and charging equipmentMB1-ADS see Service manifolds, gauges and charging hosesMB1-ADS/VAC see Service manifolds, gauges and charging hosesMB2-ADS see Service manifolds, gauges and charging hosesMB2-AP see Service manifolds, gauges and charging hoses

MB4-ADS see Service manifolds, gauges and charging hosesMB5-ADS see Service manifolds, gauges and charging hosesMB-EP see Service manifolds, gauges and charging hosesMB-EP see Service manifolds, gauges and charging hosesMB-HH see Service manifolds, gauges and charging hoses

MB-IP see Service manifolds, gauges and charging hosesMB-IP see Service manifolds, gauges and charging hosesMBP-EP see Service manifolds, gauges and charging hosesMBP-IP see Service manifolds, gauges and charging hosesMB-SP see Service manifolds, gauges and charging hoses

MB-SR see Service manifolds, gauges and charging hosesMCC-2 see Service manifolds, gauges and charging hosesMCC-2/247 see Service manifolds, gauges and charging hosesMCC-4/4 see Service manifolds, gauges and charging hosesMCC-4/447 see Service manifolds, gauges and charging hoses

MCC-4/I see Service manifolds, gauges and charging hosesMCC-550/4 see Service manifolds, gauges and charging hosesMCO-06 see Copper tubes, coils & solder fittings (Inch & Metric)MCO-08 see Copper tubes, coils & solder fittings (Inch & Metric)MCO-10 see Copper tubes, coils & solder fittings (Inch & Metric)

MCO-12 see Copper tubes, coils & solder fittings (Inch & Metric)MCO-15 see Copper tubes, coils & solder fittings (Inch & Metric)MCO-16 see Copper tubes, coils & solder fittings (Inch & Metric)MCO-18 see Copper tubes, coils & solder fittings (Inch & Metric)MCO-22 see Copper tubes, coils & solder fittings (Inch & Metric)

MCSS-0.55 see Evacuating and charging equipmentMCSS-0.55/44 see Evacuating and charging equipmentMCSS-1 see Evacuating and charging equipmentMCSS-1/44 see Evacuating and charging equipmentMCSS-2 see Evacuating and charging equipment

MCSS-2/44 see Evacuating and charging equipmentMET-100-06 see Fluid control componentsMET-100-07 see Fluid control componentsMET-200-12 see Fluid control componentsMET-300-13 see Fluid control components

MET-300-16 see Fluid control componentsMET-300-21 see Fluid control componentsMET-400-28 see Fluid control componentsMET-500-32 see Fluid control componentsMF-1150C-024U see Fluid control components

MF-1150C-048U see Fluid control componentsMF-1150C-230U see Fluid control componentsMF-1360C-110U see Fluid control componentsMF-1900C-024U see Fluid control componentsMF-4 see Evacuating and charging equipment

MF-4+LP-4 see Evacuating and charging equipmentMFF-S-02 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"MFF-S-03 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"MFF-S-04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"MFF-S-06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

MFF-S-08 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"MFF-S-10 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"MFF-S-12 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"MFF-S-16 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"MFF-S-20 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

MFF-S-24 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"MFF-S-32 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"M-HDL-12-B see Service manifolds, gauges and charging hosesM-HDL-12-R see Service manifolds, gauges and charging hosesM-HDL-12-Y see Service manifolds, gauges and charging hoses

M-HDL-6 see Evacuating and charging equipmentM-HDL-6-B see Service manifolds, gauges and charging hosesM-HDL-6-R see Service manifolds, gauges and charging hosesMI-CAP see Fluid control componentsMIR-1 see Service manifolds, gauges and charging hoses

MIR-1 see Tube working toolsMIR-1R see Tube working toolsMIR-2 see Tube working toolsMIR-2 see Service manifolds, gauges and charging hosesMIR-2R see Tube working tools

MIR-3 see Tube working toolsMIR-3R see Tube working toolsMIR-4 see Tube working toolsMIR-4R see Tube working toolsMIR-5 see Tube working tools

MIR-5R see Tube working toolsMK-040-DS see Evacuating and charging equipmentMK-060-DS see Evacuating and charging equipmentMK-120-DS see Evacuating and charging equipmentMK-180-DS see Evacuating and charging equipment

MK-240-DS see Evacuating and charging equipmentMK-280-DS see Evacuating and charging equipmentM-MM-02 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"M-MM-03 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"M-MM-04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

M-MM-06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"M-MM-08 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"M-MM-10 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"M-MM-12 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"M-MM-16 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

MMS-200 see Fluid control componentsMMS-80 see Fluid control componentsMP-02 see Refrigeration accessoriesMP-02C see Refrigeration accessoriesMP-03 see Refrigeration accessories

MP-03C see Refrigeration accessoriesMP-04 see Refrigeration accessoriesMP-04C see Refrigeration accessoriesMP-06 see Refrigeration accessoriesMP-06C see Refrigeration accessories

MP-08 see Refrigeration accessoriesMP-08C see Refrigeration accessoriesMP-12 see Refrigeration accessoriesMP-12C see Refrigeration accessoriesMP-18 see Refrigeration accessories

MP-18C see Refrigeration accessoriesMPF-M10 see Refrigeration accessoriesMPF-M12 see Refrigeration accessoriesMPF-M16 see Refrigeration accessoriesMPR-M08 see Refrigeration accessories

MPR-M10 see Refrigeration accessoriesMPR-M12 see Refrigeration accessoriesMPR-M16 see Refrigeration accessoriesMR-14-BH see Service manifolds, gauges and charging hosesMR-14-RH see Service manifolds, gauges and charging hoses

MR-14-VK see Service manifolds, gauges and charging hosesMR-14-VS see Service manifolds, gauges and charging hosesMR-MM-032 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"MR-MM-042 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"MR-MM-043 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

MR-MM-064 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"MR-MM-082 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"MR-MM-084 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"MR-MM-086 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"MR-MM-106 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

MR-MM-108 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"MS-04 see Fluid control componentsMS-06 see Fluid control componentsMS-08 see Fluid control componentsMS-10 see Fluid control components

MS-12 see Fluid control componentsMS-14 see Fluid control componentsMS-18 see Fluid control componentsMS-22 see Fluid control componentsMS-26 see Fluid control components

_ 12 _


MS-34 see Fluid control componentsMSK-08 see Tube working toolsMSSK-26 see Tube working toolsMT-02 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"MT-03 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

MT-04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"MT-06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"MT-08 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"MT-10 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"MT-12 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

MT-16 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"MT-20 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"MT-24 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"MTS-04 see Fluid control componentsMTS-06 see Fluid control components

MTU-06 see Copper tubes, coils & solder fittings (Inch & Metric)MTU-08 see Copper tubes, coils & solder fittings (Inch & Metric)MTU-10 see Copper tubes, coils & solder fittings (Inch & Metric)MTU-12 see Copper tubes, coils & solder fittings (Inch & Metric)MTU-15 see Copper tubes, coils & solder fittings (Inch & Metric)

MTU-16 see Copper tubes, coils & solder fittings (Inch & Metric)MTU-18 see Copper tubes, coils & solder fittings (Inch & Metric)MTU-22 see Copper tubes, coils & solder fittings (Inch & Metric)MTU-28 see Copper tubes, coils & solder fittings (Inch & Metric)MTU-35 see Copper tubes, coils & solder fittings (Inch & Metric)

MULTI-R-COMBI/V2 see Evacuating and charging equipmentMV-0077 see Automatic access valves & fittingsMV-0099 see Automatic access valves & fittingsMV-0101 see Automatic access valves & fittingsMV-0111 see Automatic access valves & fittings

MV-1010 see Automatic access valves & fittingsMV-1050 see Automatic access valves & fittingsMV-1060 see Automatic access valves & fittingsMV-1090 see Automatic access valves & fittingsMV-1200 see Automatic access valves & fittings

MV-1212 see Automatic access valves & fittingsMV-1414 see Automatic access valves & fittingsMV-1414C see Automatic access valves & fittingsMV-1428 see Automatic access valves & fittingsMV-1438 see Automatic access valves & fittings


MV-1777 see Automatic access valves & fittingsMV-1808 see Automatic access valves & fittingsMV-1818 see Automatic access valves & fittingsMV-1818C see Automatic access valves & fittingsMV-2000 see Automatic access valves & fittings

MV-2010 see Automatic access valves & fittingsMV-2010 (QC-E4) see Automatic access valves & fittingsMV-2012 see Automatic access valves & fittingsMV-2014 see Automatic access valves & fittingsMV-2018 see Automatic access valves & fittings






MV-2225 see Automatic access valves & fittingsMV-2235 see Automatic access valves & fittingsMV-2243 see Automatic access valves & fittingsMV-2245 see Automatic access valves & fittingsMV-2245 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"










MV-3710 see Automatic access valves & fittingsMV-3800 see Automatic access valves & fittingsMV-3813 see Tube working toolsMV-3813 see Automatic access valves & fittingsMV-3813 see Automatic access valves & fittings

MV-3813 see Automatic access valves & fittingsMV-3814 see Tube working toolsMV-3814 see Automatic access valves & fittingsMV-3814 see Automatic access valves & fittingsMV-3816 see Tube working tools



MV-3920 see Automatic access valves & fittingsMV-3930 see Automatic access valves & fittingsMV-3936 see Automatic access valves & fittingsMV-4338 (A-1) see Automatic access valves & fittingsMV-4358 (A-2) see Automatic access valves & fittings












MV-8505-050 see Automatic access valves & fittingsMV-8725 see Automatic access valves & fittingsMV-9160 see Automatic access valves & fittingsMV-9601 see Automatic access valves & fittingsMV-9602 see Automatic access valves & fittings



MV-9628 see Automatic access valves & fittingsMV-AVX-6-050 see Automatic access valves & fittingsMV-AVX-6-100 see Automatic access valves & fittingsMV-AVX-6-150 see Automatic access valves & fittingsMV-AVX-6810 see Automatic access valves & fittings

N1-04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"N1-05 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"N1-06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"N1-08 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"N1-10 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"



N5-08 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"N5-10 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"N5-12 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"NBC-120 see Service manifolds, gauges and charging hosesNBC-72 see Service manifolds, gauges and charging hoses

NFT5-6 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"NHA-120 see Service manifolds, gauges and charging hosesNHA-48 see Service manifolds, gauges and charging hosesNHA-72 see Service manifolds, gauges and charging hosesNHA-78306 see Service manifolds, gauges and charging hoses

NHA-78406 see Service manifolds, gauges and charging hosesNHA-78410 see Service manifolds, gauges and charging hosesNHA-78506 see Service manifolds, gauges and charging hosesNHA-78510 see Service manifolds, gauges and charging hosesNRS4-0043 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

NRS4-0054 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"NRS4-0064 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"NRS4-0065 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"NRS4-0086 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"NRS4-0108 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

NRS4-1/2x10mm see Forged brass & steel fittings "NPT" & "NPT 45° SAE"NRS4-1210 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"NRS4-3/4x16mm see Forged brass & steel fittings "NPT" & "NPT 45° SAE"NRS4-3/8x6mm see Forged brass & steel fittings "NPT" & "NPT 45° SAE"NRS4-3/8x8mm see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

NRS4-5/8x12mm see Forged brass & steel fittings "NPT" & "NPT 45° SAE"NRS4-5/8x15mm see Forged brass & steel fittings "NPT" & "NPT 45° SAE"NRS4-7/8x20mm see Forged brass & steel fittings "NPT" & "NPT 45° SAE"NS4-03 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"NS4-04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

NS4-05 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"NS4-06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"NS4-06mm see Forged brass & steel fittings "NPT" & "NPT 45° SAE"NS4-08 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"NS4-10 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

NS4-10mm see Forged brass & steel fittings "NPT" & "NPT 45° SAE"NS4-12 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"NS4-12mm see Forged brass & steel fittings "NPT" & "NPT 45° SAE"NS4-16mm see Forged brass & steel fittings "NPT" & "NPT 45° SAE"NS4-18mm see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

_ 13 _


NS4-22mm see Forged brass & steel fittings "NPT" & "NPT 45° SAE"O” RING see Automatic access valves & fittingsOAV-06FS see Fluid control componentsOFD-553 see Fluid control componentsOLC-12 see Fluid control components

OLC-B12 see Fluid control componentsOPCV-1400 see Fluid control componentsORS-08 see Tube working toolsORS-10 see Tube working toolsORS-11 see Tube working tools

ORS-12 see Tube working toolsORS-13 see Tube working toolsORS-14 see Tube working toolsORS-15 see Tube working toolsORS-16 see Tube working tools

ORS-17 see Tube working toolsORS-18 see Tube working toolsORS-19 see Tube working toolsORS-20 see Tube working toolsORS-21 see Tube working tools

ORS-22 see Tube working toolsORS-23 see Tube working toolsORS-24 see Tube working toolsORS-26 see Tube working toolsORV-08 see Fluid control components

ORV-12 see Fluid control componentsORV-15 see Fluid control componentsORVS-1008 see Fluid control componentsOS-81 see Fluid control componentsOS-82 see Fluid control components

OS-85 see Fluid control componentsOS-87 see Fluid control componentsOS-88 see Fluid control componentsOS-90 see Fluid control componentsOSC-85 see Fluid control components

OSC-87 see Fluid control componentsOSC-88 see Fluid control componentsOSC-90 see Fluid control componentsOSC-92 see Fluid control componentsOST-2270 see Fluid control components

OST-700 see Fluid control componentsP-11 see Tube working toolsP-12 see Tube working toolsP-17 see Tube working toolsP-18 see Tube working tools

P2-03 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"P2-04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"P2-05 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"P2-06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"P2-08 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

P2-10 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"P2-12 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"P-8 see Tube working toolsP-9 see Tube working toolsPAINT see Copper tubes, coils & solder fittings (Inch & Metric)

PAS-090 see Fluid control componentsPAS-22B see Fluid control componentsPAS-23B see Fluid control componentsPAS-32B see Fluid control componentsPAS-33B see Fluid control components

PAS-44B see Fluid control componentsPAS-45B see Fluid control componentsPAS-761-US see Fluid control componentsPAS-768-US see Fluid control componentsPAS-771B-US see Fluid control components

PAS-771R-US see Fluid control componentsPAS-771-US see Fluid control componentsPAS-773-US see Fluid control componentsPC-42 see Service manifolds, gauges and charging hosesPC-42 see Tube working tools

PC-42/BLADE see Tube working toolsPC-63 see Tube working toolsPC-63/BLADE see Tube working toolsPCG-2642 see Tube working toolsPCG-35 see Tube working tools

PCG-B35 see Tube working toolsPFB-06 see Tube working toolsPFB-08 see Tube working toolsPFB-10 see Tube working toolsPFB-12 see Tube working tools

PFB-14 see Tube working toolsPFB-16 see Tube working toolsPFB-18 see Tube working toolsPH-11 see Tube working toolsPH-12 see Tube working tools

PH-17 see Tube working toolsPH-18 see Tube working toolsPH-22 see Tube working toolsPIPETTE/1 see Refrigeration accessoriesPIPETTE/2 see Refrigeration accessories

PM-120C see Electronic measurement and control instrumentsPM-80-B see Service manifolds, gauges and charging hosesPM-80-R see Service manifolds, gauges and charging hosesPMK-08-ALL see Evacuating and charging equipmentPMK-09-ALL see Evacuating and charging equipment

PMK-10-ALL see Evacuating and charging equipmentPMK-11-ALL see Evacuating and charging equipmentPMK-29-ALL see Evacuating and charging equipmentPMK-30-ALL see Evacuating and charging equipmentPO-230 see Refrigeration accessories

PPL-10 see Tube working toolsPRH-4D-24 see Tube working toolsPROBE-01/V2 see Electronic measurement and control instrumentsPROBE-03/V2 see Electronic measurement and control instrumentsPROBE-06/V2 see Electronic measurement and control instruments

PRT-8020 see Electronic measurement and control instrumentsPSA-200B see Electronic measurement and control instrumentsPSA-200R see Electronic measurement and control instrumentsPSBD-606 see Refrigeration accessoriesPSBD-606M see Refrigeration accessories

PSBS-02 see Refrigeration accessoriesPSBS-03 see Refrigeration accessoriesPSBS-04 see Refrigeration accessoriesPSBS-05 see Refrigeration accessoriesPSBS-10 see Refrigeration accessories

PS-HP200-150 see Refrigeration accessoriesPS-HP250-150 see Refrigeration accessoriesPS-HP300-200 see Refrigeration accessoriesPS-HP350-250 see Refrigeration accessoriesPS-HP400-200 see Refrigeration accessories

PS-HP450-250 see Refrigeration accessoriesPS-LP05-20 see Refrigeration accessoriesPS-LP25-80 see Refrigeration accessoriesPS-LP40-80 see Refrigeration accessoriesPS-MC-HP-440 see Refrigeration accessories

PS-MF-HP-410 see Refrigeration accessoriesPSO-2B see Fluid control componentsPSO-2ES see Fluid control componentsPSO-3B see Fluid control componentsPSO-3ES see Fluid control components

PSO-4B see Fluid control componentsPSO-4ES see Fluid control componentsPSO-5B see Fluid control componentsPSO-5ES see Fluid control componentsPSO-7S see Fluid control components

PSO-9S see Fluid control componentsPSS-100B see Electronic measurement and control instrumentsPSS-100R see Electronic measurement and control instrumentsPSS-200B see Electronic measurement and control instrumentsPSS-200R see Electronic measurement and control instruments

PT-100 see Electronic measurement and control instrumentsPT-109 see Tube working toolsPT-14285 see Tube working toolsPTCB-340 see Tube working toolsPTCB-350 see Tube working tools

PTCB-360 see Tube working toolsPTCB-370 see Tube working toolsPTCB-380 see Tube working toolsPTCB-390 see Tube working toolsPTR-1 see Service manifolds, gauges and charging hoses

PTR-1 see Tube working toolsPTR-1B see Tube working toolsPTR-2 see Tube working toolsPV3P-10102 see Tube working toolsPVB-10102 see Tube working tools

PVC-200/2 mm see Refrigeration accessoriesPVC-300/3 mm see Refrigeration accessoriesPVC-CLIP-200 see Refrigeration accessoriesPVC-CLIP-300 see Refrigeration accessoriesPVC-RAIL see Refrigeration accessories

PW-5014 see Tube working toolsPW-5036 see Tube working toolsQAA-04 see Service manifolds, gauges and charging hosesQAA-04 see Automatic access valves & fittingsQAA-05 see Automatic access valves & fittings

QAA-06 see Automatic access valves & fittingsQAG-04 see Automatic access valves & fittingsQAG-05 see Automatic access valves & fittingsQAG-06 see Automatic access valves & fittingsQAI-04 see Automatic access valves & fittings

QAI-05 see Automatic access valves & fittingsQAI-06 see Automatic access valves & fittingsQC-13445-134a see Automatic access valves & fittingsQC-2342 see Automatic access valves & fittingsQC-48-3/4 see Fluid control components

QCA-5/16x1/4 see Service manifolds, gauges and charging hosesQCA-5/16x1/4 see Automatic access valves & fittingsQCCA see Tube working toolsQC-E3 see Evacuating and charging equipmentQC-E64 see Automatic access valves & fittings

QCF-04 see Automatic access valves & fittingsQCF-06 see Automatic access valves & fittingsQCM-04 see Automatic access valves & fittingsQCM-06 see Automatic access valves & fittingsQC-S2 see Automatic access valves & fittings

QC-S4 see Automatic access valves & fittingsQC-S46 see Automatic access valves & fittingsQC-S4A see Automatic access valves & fittingsQC-S4A-134a see Automatic access valves & fittingsQC-S4B see Automatic access valves & fittings

QCS-5/16x1/4 see Service manifolds, gauges and charging hosesQCS-5/16x1/4 see Automatic access valves & fittingsQC-S64 see Automatic access valves & fittingsQVA-03 see Automatic access valves & fittingsQVA-03 see Evacuating and charging equipment

QVA-03 see Service manifolds, gauges and charging hosesQVA-05 see Evacuating and charging equipmentQVA-05 see Service manifolds, gauges and charging hosesQVA-05 see Automatic access valves & fittingsQVA-103 see Automatic access valves & fittings

QVA-105 see Automatic access valves & fittingsQVA-SET see Automatic access valves & fittingsQVA-SET1 see Automatic access valves & fittingsQWIKCHECK see Refrigeration accessoriesR-600A-BP see Service manifolds, gauges and charging hoses

R-600A-HP see Service manifolds, gauges and charging hosesRA-500 see Electronic measurement and control instrumentsRA-500P see Electronic measurement and control instrumentsRACK-06 see Tube working toolsRACK-08 see Tube working tools

RB-1 see Tube working toolsRB-4240 see Service manifolds, gauges and charging hosesRB-4240 see Copper tubes, coils & solder fittings (Inch & Metric)RCH-10 see Evacuating and charging equipmentRCH-10 see Evacuating and charging equipment

RCH-10 see Evacuating and charging equipmentRCH-10 see Refrigeration accessoriesRCO-420 see Refrigeration accessoriesRCYL-12L see Evacuating and charging equipmentRCYL-30L see Evacuating and charging equipment

RCYL-50L see Evacuating and charging equipmentRED-FF-S-0021 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"RED-FF-S-0032 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"RED-FF-S-0042 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"RED-FF-S-0043 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

RED-FF-S-0062 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"RED-FF-S-0063 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"RED-FF-S-0064 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"RED-FF-S-0082 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"RED-FF-S-0083 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"






RED-MF-0032 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"RED-MF-0042 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"RED-MF-0043 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"RED-MF-0062 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"RED-MF-0064 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

RED-MF-0084 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"RED-MF-0086 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"RED-MF-0106 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"RED-MF-0108 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"RED-MF-0128 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

RED-MF-1210 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"RED-MF-S-0032 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"RED-MF-S-0042 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"RED-MF-S-0043 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"RED-MF-S-0062 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

RED-MF-S-0063 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"RED-MF-S-0064 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"RED-MF-S-0082 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"RED-MF-S-0083 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"RED-MF-S-0084 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"



_ 14 _



RFM-20 see Refrigeration accessoriesRFM-60 see Refrigeration accessoriesRHP-082-S see Fluid control componentsRHP-083 see Fluid control componentsRHP-083-S see Fluid control components

RHP-084-S see Fluid control componentsRHP-163 see Fluid control componentsRHP-163-S see Fluid control componentsRHP-164 see Fluid control componentsRHP-164-S see Fluid control components

RHP-165 see Fluid control componentsRHP-165-S see Fluid control componentsRIO-208 see Service manifolds, gauges and charging hosesRIO-208 see Service manifolds, gauges and charging hosesRIO-208 see Service manifolds, gauges and charging hoses

RIO-208 see Tube working toolsRK-800B see Service manifolds, gauges and charging hosesRK-800R see Service manifolds, gauges and charging hosesRO-41 see Refrigeration accessoriesRO-42 see Refrigeration accessories

RO-62 see Refrigeration accessoriesRO-82 see Refrigeration accessoriesROT-100-S02-C see Fluid control componentsROT-100-S03-C see Fluid control componentsROT-100-S05-C see Fluid control components

ROT-100-S06-C see Fluid control componentsROT-200-1x3/8 see Fluid control componentsROT-200-S07-C see Fluid control componentsROT-200-S08-C see Fluid control componentsROT-200-S11-C see Fluid control components

ROT-200-S12-C see Fluid control componentsROT-200-S14-C see Fluid control componentsROT-202-1x1/2 see Fluid control componentsROT-202-1x3/8 see Fluid control componentsROT-222-11/4x3/4 see Fluid control components

ROT-222-11/4x5/8 see Fluid control componentsROT-222-1x5/8 see Fluid control componentsROT-300-S16-C see Fluid control componentsROT-300-S17-C see Fluid control componentsROT-300-S21-C see Fluid control components

ROT-300-S22-C see Fluid control componentsROT-302-11/4x11/8 see Fluid control componentsROT-302-11/4x7/8 see Fluid control componentsROT-302-13/4x7/8 see Fluid control componentsROT-352-13/4x11/8 see Fluid control components

ROT-352-13/4x13/8 see Fluid control componentsROT-400-S28-C see Fluid control componentsROT-500-S31-C see Fluid control componentsROT-500-S32-C see Fluid control componentsRS-09 see Refrigeration accessories

RS-128C see Electronic measurement and control instrumentsRS-128R see Electronic measurement and control instrumentsRS-15 see Refrigeration accessoriesRS-20 see Refrigeration accessoriesRS-31 see Refrigeration accessories

RSC-20 see Refrigeration accessoriesRSD-175 see Tube working toolsRSS-62 see Tube working toolsRT-700K see Refrigeration accessoriesRT-750A see Refrigeration accessories

RT-751M see Refrigeration accessoriesRT-752C see Refrigeration accessoriesRTC-127 see Tube working toolsRTC-127-A see Tube working toolsRTC-127-B see Tube working tools

RTC-274 see Tube working toolsRTC-274-A see Tube working toolsRTC-274-B see Tube working toolsRV-220 see Evacuating and charging equipmentRW-0608/1012 see Tube working tools

RW-0910/1112 see Tube working toolsRW-1012/1314 see Tube working toolsRW-124 see Tube working toolsRW-127 see Service manifolds, gauges and charging hosesRW-127 see Service manifolds, gauges and charging hoses

RW-127 see Tube working toolsRW-1314/1719 see Tube working toolsSA-11/8 see Fluid control componentsSA-13/8 see Fluid control componentsSA-15/8 see Fluid control components

SA-21/8 see Fluid control componentsSA-507 see Fluid control componentsSACV2-04 see Automatic access valves & fittingsSACV3-04 see Automatic access valves & fittingsSACV3-06 see Automatic access valves & fittings

SACV3-08 see Automatic access valves & fittingsSACV3-10 see Automatic access valves & fittingsSACV3-12 see Automatic access valves & fittingsSB-002 see Refrigeration accessoriesSB-003 see Refrigeration accessories

SB-007 see Refrigeration accessoriesSB-049 see Refrigeration accessoriesSB-101 see Refrigeration accessoriesSB-103 see Refrigeration accessoriesSB-110 see Refrigeration accessories

SB-113 see Refrigeration accessoriesSBLT-024 see Fluid control componentsSBLT-048 see Fluid control componentsSBLT-100 see Fluid control componentsSBS-1483 see Refrigeration accessories

SBS-1907 see Refrigeration accessoriesSBS-2754 see Refrigeration accessoriesSBS-3178 see Refrigeration accessoriesSBS-3672 see Refrigeration accessoriesSCK-6D08M see Tube working tools

SCK-6D10M see Tube working toolsSCK-6D12M see Tube working toolsSF-28-154 see Refrigeration accessoriesSF-28-172 see Refrigeration accessoriesSF-28-200 see Refrigeration accessories

SF-28-230 see Refrigeration accessoriesSF-28-254 see Refrigeration accessoriesSF-28-300 see Refrigeration accessoriesSG-110 see Fluid control componentsSG-110R see Fluid control components

SG-111 see Fluid control componentsSG-111R see Fluid control componentsSG-114 see Fluid control componentsSG-114R see Fluid control componentsSG-115 see Fluid control components

SG-115R see Fluid control componentsSG-118 see Fluid control componentsSG-118R see Fluid control componentsSG-119 see Fluid control componentsSG-119R see Fluid control components

SG-204 see Fluid control componentsSG-204R see Fluid control componentsSG-205 see Fluid control componentsSG-205R see Fluid control componentsSG-206 see Fluid control components

SG-206R see Fluid control componentsSG-207 see Fluid control componentsSG-207R see Fluid control componentsSG-208 see Fluid control componentsSG-208R see Fluid control components

SG-209 see Fluid control componentsSG-209R see Fluid control componentsSH-1075 see Electronic measurement and control instrumentsSH-1075 see Electronic measurement and control instrumentsSH-2010 see Electronic measurement and control instruments

SH-2010 see Electronic measurement and control instrumentsSH-4011 see Electronic measurement and control instrumentsSH-4011 see Electronic measurement and control instrumentsSH-4040 see Electronic measurement and control instrumentsSH-4040 see Electronic measurement and control instruments

SH-5005 see Electronic measurement and control instrumentsSH-5005 see Electronic measurement and control instrumentsSH-66-AC see Electronic measurement and control instrumentsSH-88A see Electronic measurement and control instrumentsSH-9010 see Electronic measurement and control instruments

SH-9010 see Electronic measurement and control instrumentsSH-9015 see Electronic measurement and control instrumentsSH-9015 see Electronic measurement and control instrumentsSK-1I see Service manifolds, gauges and charging hosesSK-2I see Service manifolds, gauges and charging hoses

SK-2IA see Service manifolds, gauges and charging hosesSK-2IE see Service manifolds, gauges and charging hosesSK-6/Inch see Service manifolds, gauges and charging hosesSK-6I see Service manifolds, gauges and charging hosesSLM-8050 see Electronic measurement and control instruments

SOLDER-118 see Refrigeration accessoriesSP-120 see Electronic measurement and control instrumentsSPUN-619 see Fluid control componentsSPUN-621 see Fluid control componentsSRH-77A see Electronic measurement and control instruments

SRP-08 see Tube working toolsSSL-083 see Fluid control componentsSSL-084 see Fluid control componentsSSL-084-S see Fluid control componentsSSL-165 see Fluid control components

SSL-165-S see Fluid control componentsSSL-166-S see Fluid control componentsSSL-307-S see Fluid control componentsSSL-419-S see Fluid control componentsSSL-4811-S see Fluid control components

SSL-4813-S see Fluid control componentsSTB-7000 see Service manifolds, gauges and charging hosesSTB-7000 see Tube working toolsSTT-796 see Refrigeration accessoriesSTT-800 see Refrigeration accessories

STT-891 see Refrigeration accessoriesSUNISO-3,5GS-04 see Refrigeration accessoriesSUNISO-3GS-04 see Refrigeration accessoriesSUNISO-3GS-20 see Refrigeration accessoriesSUNISO-4GS-04 see Refrigeration accessories

SUNISO-4GS-20 see Refrigeration accessoriesSUNISO-5G-04 see Refrigeration accessoriesSUNISO-SL32-04 see Refrigeration accessoriesSUPER-3790 see Refrigeration accessoriesSUPER-947 see Refrigeration accessories

SV2W-38/110 see Evacuating and charging equipmentSV2W-38/220 see Evacuating and charging equipmentSV2W-38/627-VRP-110 see Evacuating and charging equipmentSV2W-38/627-VRP-220 see Evacuating and charging equipmentSWM-4D-41 see Tube working tools

T1-04A see Forged brass & steel fittings "NPT" & "NPT 45° SAE"T1-04B see Forged brass & steel fittings "NPT" & "NPT 45° SAE"T1-04C see Forged brass & steel fittings "NPT" & "NPT 45° SAE"T1-06B see Forged brass & steel fittings "NPT" & "NPT 45° SAE"T1-06C see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

T1-08C see Forged brass & steel fittings "NPT" & "NPT 45° SAE"T1-08D see Forged brass & steel fittings "NPT" & "NPT 45° SAE"T1-10C see Forged brass & steel fittings "NPT" & "NPT 45° SAE"T1-10D see Forged brass & steel fittings "NPT" & "NPT 45° SAE"T2-04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

T2-05 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"T2-06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"T2-08 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"T2-10 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"T2-12 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

T3-04A see Forged brass & steel fittings "NPT" & "NPT 45° SAE"T3-04B see Forged brass & steel fittings "NPT" & "NPT 45° SAE"T3-06B see Forged brass & steel fittings "NPT" & "NPT 45° SAE"T3-08D see Forged brass & steel fittings "NPT" & "NPT 45° SAE"T3-10D see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

T3-12E see Forged brass & steel fittings "NPT" & "NPT 45° SAE"T3F-02 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"T3F-03 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"T3F-04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"T3F-06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

T3F-08 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"T3F-10 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"T3F-12 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"T3F-16 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"T3F-S-02 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

T3F-S-03 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"T3F-S-04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"T3F-S-06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"T3F-S-08 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"T3F-S-10 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

T3F-S-12 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"T3F-S-16 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"T3F-S-20 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"T3F-S-24 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"T6-4 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

TAHL-5 see Electronic measurement and control instrumentsTB-03 see Tube working toolsTB-06 see Tube working toolsTB-06 see Service manifolds, gauges and charging hosesTB-16 see Tube working tools

TB-16 see Service manifolds, gauges and charging hosesTB-364-04 see Tube working toolsTB-364-05/8mm see Tube working toolsTB-364-05/8mm see Tube working toolsTB-364-06 see Tube working tools

TB-364-06mm see Tube working toolsTB-364-08 see Tube working toolsTB-364-10 see Tube working toolsTB-364-10mm see Tube working toolsTB-364-12 see Tube working tools

TB-364-12/H see Tube working toolsTB-364-12mm see Tube working toolsTB-364-15mm see Tube working toolsTB-364-16mm see Tube working toolsTC-0316 see Tube working tools

TC-0316-H see Tube working toolsTC-0328 see Tube working toolsTC-0328-H see Tube working toolsTC-0432-ZR see Tube working toolsTC-0432-ZRH see Tube working tools

TC-0638-R see Tube working toolsTC-0638-RH see Tube working toolsTC-1000 see Tube working toolsTC-1000-SP see Tube working toolsTC-10168-Z see Tube working tools

TC-10168-ZC see Tube working toolsTC-1020 see Tube working toolsTC-1050 see Tube working toolsTC-1050-SP see Tube working toolsTC-127 see Service manifolds, gauges and charging hoses

TC-127 see Tube working toolsTC-2050 see Tube working toolsTC-206 see Tube working toolsTC-274 see Service manifolds, gauges and charging hosesTC-274 see Service manifolds, gauges and charging hoses

TC-274 see Tube working toolsTC-274 see Service manifolds, gauges and charging hosesTC-307 see Service manifolds, gauges and charging hosesTC-307 see Tube working toolsTC-312 see Tube working tools

_ 15 _


TC-5140-Z see Tube working toolsTC-5140-ZC see Tube working toolsTC-B307 see Tube working toolsTC-R06C see Tube working toolsTC-R06H see Tube working tools

TC-S03 see Tube working toolsTCS-0332 see Tube working toolsTC-S04 see Tube working toolsTC-S05 see Tube working toolsTCS-38114 see Tube working tools

TC-W03C see Tube working toolsTC-W03H see Tube working toolsTC-W06A see Tube working toolsTC-W06H see Tube working toolsTC-W51A see Tube working tools

TC-W51A see Tube working toolsTC-W51C see Tube working toolsTC-W51C see Tube working toolsTE-6-01 see Service manifolds, gauges and charging hosesTE-6-01 see Tube working tools

TE-6-02 see Tube working toolsTEC-7 see Tube working toolsTEC-7/TR see Tube working toolsTEC-8/TR see Tube working toolsTEM-6 see Tube working tools

TG-01 see Tube working toolsTH-820 see Electronic measurement and control instrumentsTH-850 see Electronic measurement and control instrumentsTHB-368 see Tube working toolsTHM-50 see Electronic measurement and control instruments

THM-5025-H see Electronic measurement and control instrumentsTHM-50-S see Electronic measurement and control instrumentsTL-13 see Tube working toolsTL-17 see Tube working toolsTM-99A see Electronic measurement and control instruments

TP-402B see Electronic measurement and control instrumentsTP-402R see Electronic measurement and control instrumentsTPI13-006 see Copper tubes, coils & solder fittings (Inch & Metric)TPI13-008 see Copper tubes, coils & solder fittings (Inch & Metric)TPI13-010 see Copper tubes, coils & solder fittings (Inch & Metric)

TPI13-012 see Copper tubes, coils & solder fittings (Inch & Metric)TPI13-015 see Copper tubes, coils & solder fittings (Inch & Metric)TPI13-018 see Copper tubes, coils & solder fittings (Inch & Metric)TPI13-022 see Copper tubes, coils & solder fittings (Inch & Metric)TPI13-028 see Copper tubes, coils & solder fittings (Inch & Metric)















TPI9-125 see Copper tubes, coils & solder fittings (Inch & Metric)TPI9-133 see Copper tubes, coils & solder fittings (Inch & Metric)TPI9-140 see Copper tubes, coils & solder fittings (Inch & Metric)TPI9-160 see Copper tubes, coils & solder fittings (Inch & Metric)TPM-1/V2 see Electronic measurement and control instruments

TPM-2/V2 see Electronic measurement and control instrumentsTPM-58 see Electronic measurement and control instrumentsTPM-62 see Electronic measurement and control instrumentsTR2-00446 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"TR2-00664 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

TR2-00668 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"TR2-00886 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"TRACE2-118 see Refrigeration accessoriesTRACE2-3790 see Refrigeration accessoriesTRACE2-474 see Refrigeration accessories

TRAX-300 see Refrigeration accessoriesTRAX-40 see Refrigeration accessoriesTSPM-1/V2 see Electronic measurement and control instrumentsTSPM-2/V2 see Electronic measurement and control instrumentsTSPM-3 see Electronic measurement and control instruments

TS-RC see Tube working toolsTS-SC see Tube working toolsTSWM-10 see Electronic measurement and control instrumentsTSWM-2/V2 see Electronic measurement and control instrumentsTSWM-30 see Electronic measurement and control instruments

TSWM-35 see Electronic measurement and control instrumentsTSWM-35/EXT see Electronic measurement and control instrumentsTT1-001 see Refrigeration accessoriesTT2-001 see Refrigeration accessoriesTU-04I see Copper tubes, coils & solder fittings (Inch & Metric)

TU-06I see Copper tubes, coils & solder fittings (Inch & Metric)TU-08I see Copper tubes, coils & solder fittings (Inch & Metric)TU-10I see Copper tubes, coils & solder fittings (Inch & Metric)TU-12I see Copper tubes, coils & solder fittings (Inch & Metric)TU-14I see Copper tubes, coils & solder fittings (Inch & Metric)



TWM-1/V2 see Electronic measurement and control instrumentsTX-9 see Tube working toolsTX-9 see Service manifolds, gauges and charging hosesU1-03A see Forged brass & steel fittings "NPT" & "NPT 45° SAE"U1-04A see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

U1-04B see Forged brass & steel fittings "NPT" & "NPT 45° SAE"U1-04C see Evacuating and charging equipmentU1-04C see Forged brass & steel fittings "NPT" & "NPT 45° SAE"U1-04D see Forged brass & steel fittings "NPT" & "NPT 45° SAE"U1-04M14 see Evacuating and charging equipment

U1-04M14 see Service manifolds, gauges and charging hosesU1-05A see Forged brass & steel fittings "NPT" & "NPT 45° SAE"U1-05B see Forged brass & steel fittings "NPT" & "NPT 45° SAE"U1-05C see Forged brass & steel fittings "NPT" & "NPT 45° SAE"U1-06A see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

U1-06B see Forged brass & steel fittings "NPT" & "NPT 45° SAE"U1-06C see Evacuating and charging equipmentU1-06C see Forged brass & steel fittings "NPT" & "NPT 45° SAE"U1-06D see Forged brass & steel fittings "NPT" & "NPT 45° SAE"U1-06E see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

U1-06M14 see Evacuating and charging equipmentU1-06M14 see Service manifolds, gauges and charging hosesU1-08A see Forged brass & steel fittings "NPT" & "NPT 45° SAE"U1-08B see Forged brass & steel fittings "NPT" & "NPT 45° SAE"U1-08C see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

U1-08D see Forged brass & steel fittings "NPT" & "NPT 45° SAE"U1-08E see Forged brass & steel fittings "NPT" & "NPT 45° SAE"U-1100-S03 see Fluid control componentsU-1100-S05 see Fluid control componentsU-1100-S06 see Fluid control components

U1-10B see Forged brass & steel fittings "NPT" & "NPT 45° SAE"U1-10C see Forged brass & steel fittings "NPT" & "NPT 45° SAE"U1-10D see Forged brass & steel fittings "NPT" & "NPT 45° SAE"U1-10E see Forged brass & steel fittings "NPT" & "NPT 45° SAE"U1-12D see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

U1-12E see Forged brass & steel fittings "NPT" & "NPT 45° SAE"U-1200-S07 see Fluid control componentsU-1200-S08 see Fluid control componentsU-1200-S12 see Fluid control componentsU-1300-S13 see Fluid control components

U-1300-S14 see Fluid control componentsU-1300-S16 see Fluid control componentsU-1300-S17 see Fluid control componentsU-1300-S21 see Fluid control componentsU-1300-S22 see Fluid control components




U-1800-S32 see Fluid control componentsU-200-S07 see Fluid control componentsU-200-S08 see Fluid control componentsU2-03 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"U2-04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

U2-05 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"U2-06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"U2-08 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"U2-10 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"U2-12 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

U-2300-06 see Fluid control componentsU-2300-08 see Fluid control componentsU-2300-10 see Fluid control componentsU-2300-14 see Fluid control componentsU-300-S08 see Fluid control components

U-300-S11 see Fluid control componentsU-300-S13 see Fluid control componentsU-300-S14 see Fluid control componentsU3-04A see Service manifolds, gauges and charging hosesU3-04A see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

U3-04B see Service manifolds, gauges and charging hosesU3-04B see Forged brass & steel fittings "NPT" & "NPT 45° SAE"U3-04C see Forged brass & steel fittings "NPT" & "NPT 45° SAE"U3-05A see Forged brass & steel fittings "NPT" & "NPT 45° SAE"U3-05B see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

U3-06A see Forged brass & steel fittings "NPT" & "NPT 45° SAE"U3-06B see Forged brass & steel fittings "NPT" & "NPT 45° SAE"U3-06C see Forged brass & steel fittings "NPT" & "NPT 45° SAE"U3-06D see Forged brass & steel fittings "NPT" & "NPT 45° SAE"U3-08B see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

U3-08C see Forged brass & steel fittings "NPT" & "NPT 45° SAE"U3-08D see Forged brass & steel fittings "NPT" & "NPT 45° SAE"U3-10C see Forged brass & steel fittings "NPT" & "NPT 45° SAE"U3-10D see Forged brass & steel fittings "NPT" & "NPT 45° SAE"U3-10E see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

U-400-S16 see Fluid control componentsU-400-S17 see Fluid control componentsU4-04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"U4-06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"U4-08 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

U4-10 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"U4-12 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"U-500-S22 see Fluid control componentsU-500-S27 see Fluid control componentsU5-04A see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

U5-04B see Forged brass & steel fittings "NPT" & "NPT 45° SAE"U5-06B see Forged brass & steel fittings "NPT" & "NPT 45° SAE"U5-08D see Forged brass & steel fittings "NPT" & "NPT 45° SAE"U6-4A see Forged brass & steel fittings "NPT" & "NPT 45° SAE"U6-4B see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

UFF-02 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"UFF-03 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"UFF-04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"UFF-06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"UFF-08 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

UFF-10 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"UFF-12 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"UFF-S-02 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"UFF-S-03 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"UFF-S-04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

UFF-S-06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"UFF-S-08 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"UFF-S-10 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"UFF-S-12 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"UFF-S-16 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

_ 16 _


UFF-S-20 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"UFF-S-24 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"UMF-02 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"UMF-03 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"UMF-04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

UMF-06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"UMF-08 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"UMF-10 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"UMF-12 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"UMF-16 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

UR2-0043 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"UR2-0054 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"UR2-0064 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"UR2-0065 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"UR2-0084 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"




UR3-0810 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"UR3-1012 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"UR3-1210 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"US-032 see Fluid control componentsUS-032-S see Fluid control components

US-052 see Fluid control componentsUS-053 see Fluid control componentsUS-053-S see Fluid control componentsUS-082 see Fluid control componentsUS-082-S see Fluid control components

US-083 see Fluid control componentsUS-083-S see Fluid control componentsUS-084 see Fluid control componentsUS-1/2-SS see Fluid control componentsUS-1/4-MF see Fluid control components

US-1/4-MM see Fluid control componentsUS-11/8-SS-RC see Fluid control componentsUS-14412-SW see Fluid control componentsUS-14413 see Fluid control componentsUS-14417 see Fluid control components

US-162 see Fluid control componentsUS-163 see Fluid control componentsUS-163 see Evacuating and charging equipmentUS-163-S see Fluid control componentsUS-164 see Fluid control components

US-164-S see Fluid control componentsUS-165 see Fluid control componentsUS-165-S see Fluid control componentsUS-19216-SW see Fluid control componentsUS-3/8-SS see Fluid control components

US-30013 see Fluid control componentsUS-30021 see Fluid control componentsUS3-0044 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"US3-0045 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"US3-0046 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

US3-0064 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"US3-0065 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"US3-0066 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"US3-0068 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"US3-0086 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

US3-0088 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"US3-0108 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"US-303 see Fluid control componentsUS-304 see Fluid control componentsUS-304-S see Fluid control components

US-305 see Fluid control componentsUS-305-S see Fluid control componentsUS3-0610 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"US-307-S see Fluid control componentsUS3-0810 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

US3-1010 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"US3-1012 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"US3-1014 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"US3-1212 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"US3-1214 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

US-40016-SW see Fluid control componentsUS-40017 see Fluid control componentsUS-40021 see Fluid control componentsUS-40025 see Fluid control componentsUS4-04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

US4-06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"US4-08 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"US4-10 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"US-414 see Fluid control componentsUS-414-S see Fluid control components

US-415 see Fluid control componentsUS-415-S see Fluid control componentsUS-417-S see Fluid control componentsUS-419-S see Fluid control componentsUS-485 see Fluid control components

US-487 see Fluid control componentsUS-488-SW see Fluid control componentsUS-489 see Fluid control componentsUS-5/8-SS see Fluid control componentsUS5-0044 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

US5-0066 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"US5-0088 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"US5-1010 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"US-810-CC see Fluid control componentsUS-810-CF see Fluid control components

US-810-CM see Fluid control componentsUS-810-F see Fluid control componentsUS-824-CC see Fluid control componentsUS-824-CM see Fluid control componentsUS-824-F see Fluid control components

US-83711 see Fluid control componentsUS-83713 see Fluid control componentsUS-848-C see Fluid control componentsUS-848-CC see Fluid control componentsUS-848-CF see Fluid control components

US-848-CM see Fluid control componentsUS-848-F see Fluid control componentsUS-85713 see Fluid control componentsUS-85721 see Fluid control componentsUS-86725 see Fluid control components

US-9610-SW see Fluid control componentsUS-9613 see Fluid control componentsUSD-11/8-SS see Fluid control componentsUSD-13/8-SS see Fluid control componentsUSD-15/8-SS see Fluid control components

USD-21/8-SS see Fluid control componentsUSD-25/8-SS see Fluid control componentsUSTK-04 see Tube working toolsUSTK-04 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"USTK-06 see Tube working tools

USTK-06 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"USTK-08 see Tube working toolsUSTK-08 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"USTK-10 see Tube working toolsUSTK-10 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"

USTK-12 see Tube working toolsUSTK-12 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"USTKR-46 see Tube working toolsUSTKR-46 see Forged brass & steel fittings "NPT" & "NPT 45° SAE"UVL-240 see Electronic measurement and control instruments

UVL-240 see Refrigeration accessoriesUVL-50W see Electronic measurement and control instrumentsUVL-AC see Electronic measurement and control instrumentsUVL-BCQ see Electronic measurement and control instrumentsUVL-BCS see Electronic measurement and control instruments

UVL-GLASS see Electronic measurement and control instrumentsUVL-PBP see Electronic measurement and control instrumentsUX1-4A see Forged brass & steel fittings "NPT" & "NPT 45° SAE"UX1-4B see Forged brass & steel fittings "NPT" & "NPT 45° SAE"V-35040 see Fluid control components

V-35042 see Fluid control componentsVA-39 see Automatic access valves & fittingsVAS-01 see Fluid control componentsVAS-03 see Fluid control componentsVAS-04 see Fluid control components

VAS-05 see Fluid control componentsVAS-06 see Fluid control componentsVAS-08 see Fluid control componentsVAS-09 see Fluid control componentsVAS-10 see Fluid control components

VAS-10mm see Fluid control componentsVAS-11 see Fluid control componentsVAS-12mm see Fluid control componentsVAS-16mm see Fluid control componentsVAS-18mm see Fluid control components

VAS-22mm see Fluid control componentsVAS-28mm see Fluid control componentsVAS-35mm see Fluid control componentsVAS-42mm see Fluid control componentsVAS-54mm see Fluid control components

VAS-70mm see Fluid control componentsVAS-82 see Fluid control componentsVAS-83 see Fluid control componentsVAS-84 see Fluid control componentsVAS-86 see Fluid control components

VASC-01 see Fluid control componentsVASC-02 see Fluid control componentsVASC-03 see Fluid control componentsVASC-04 see Fluid control componentsVASC-05 see Fluid control components


VASC-10 mm see Fluid control componentsVASC-11 see Fluid control componentsVASC-12 mm see Fluid control componentsVASC-16 mm see Fluid control componentsVASC-18 mm see Fluid control components

VASC-22 mm see Fluid control componentsVASC-28 mm see Fluid control componentsVASC-35 mm see Fluid control componentsVASC-42 mm see Fluid control componentsVASC-54 mm see Fluid control components


VG-10 see Tube working toolsVG-12 see Tube working toolsVG-12ING see Tube working toolsVG-14 see Tube working toolsVG-14G see Tube working tools

VG-14I see Tube working toolsVG-15 see Tube working toolsVG-16 see Tube working toolsVG-17 see Tube working toolsVG-18 see Tube working tools

VG-19 see Tube working toolsVN—05-13/1056/V2 see Refrigeration accessoriesVN—10-20/1103/V2 see Refrigeration accessoriesVNT—18-30/46/V2 see Refrigeration accessoriesVNT—25-40/25/V2 see Refrigeration accessories

VNT—34-45/25/V2 see Refrigeration accessoriesVOC-10 see Tube working toolsVOC-10 see Fluid control componentsVOC-15 see Tube working toolsVOC-15 see Fluid control components

VOC-18 see Tube working toolsVOC-18 see Fluid control componentsVPC-40 see Evacuating and charging equipmentVPF-40 see Evacuating and charging equipmentVT-400 see Evacuating and charging equipment

W3-V-80 see Service manifolds, gauges and charging hosesWA-1000 see Tube working toolsWB-1 see Tube working toolsWBO-100 see Refrigeration accessoriesWBO-100N see Refrigeration accessories

WBO-120 see Refrigeration accessoriesWBO-120N see Refrigeration accessoriesWBO-150R see Refrigeration accessoriesWBO-250 see Refrigeration accessoriesWBO-K10 see Refrigeration accessories

WBO-K10N see Refrigeration accessoriesWBO-K12 see Refrigeration accessoriesWBO-K12N see Refrigeration accessoriesWBO-K15 see Refrigeration accessoriesWBO-K15R see Refrigeration accessories

WBO-K25 see Refrigeration accessoriesWCP-010/230V see Refrigeration accessoriesWCP-020/230V see Refrigeration accessoriesWDT-128-BODY see Electronic measurement and control instrumentsWDT-128C see Electronic measurement and control instruments

WDT-128R see Electronic measurement and control instrumentsWKL-5 see Tube working toolsWM-80-B see Service manifolds, gauges and charging hosesWM-80-R see Service manifolds, gauges and charging hosesWPP-9 see Tube working tools

WS-005 see Electronic measurement and control instrumentsWS-005-1L-1/4 see Electronic measurement and control instrumentsWS-005-1L-5/16 see Electronic measurement and control instrumentsWS-005-1L-7/16 see Electronic measurement and control instrumentsWS-055 see Electronic measurement and control instruments

WS-150 see Electronic measurement and control instrumentsWS-30 see Evacuating and charging equipmentWS-AC see Electronic measurement and control instrumentsWS-AC-EU see Electronic measurement and control instrumentsWS-AC-UK see Electronic measurement and control instruments

WS-AC-USA see Electronic measurement and control instrumentsWS-ASV see Electronic measurement and control instrumentsWT-389 see Electronic measurement and control instrumentsWT-389/P see Electronic measurement and control instrumentsXLD-6050 see Electronic measurement and control instruments

XPC-06M see Tube working toolsXPC-07I see Tube working toolsXPC-T see Tube working toolsZERICE see Refrigeration accessoriesZEROL-150-5L see Refrigeration accessories

electronic measurement and control instruments … · electronic measurement and control...

Documents