RM15 Electronically controlled turret - MJ12

Description

The turret RM15 is a compact turret for a varied field of applications. It can be used as front turret for an ARFF vehicle as well as main turret for an municipal vehicle. Designed for water and foam flow rates up to 2.000 l/min at 10 bar, 450 l/min at 40 bar and dry chemical flow rates up to 20 kg/s.

Benefits Flow rate ▪ 2.000 l/min at 10 bar (530 gal/min at 150 psi)

water or water-/foam ▪ 1.900 l/min at 10 bar (500 gal/min at 150 psi)

water and 1,5 kg/s (3,3 lbs/sec) powder with ChemCore nozzle

▪ 450 l/min at 40 bar (100 gpm at 600 psi) high press. ▪ 20 kg/s at 14 bar (44 lbs at 200 psi) with

dry chemical nozzle Suitable for most extinguishing agents ▪ water ▪ water-foam (non air aspirated) ▪ CAFS ▪ foam, with foam barrel (air aspirated) ▪ combined water and dry chemical with ChemCore

nozzle ▪ dry chemical Excellent throw range ▪ 70 m (230 ft) water ▪ 47 m (155 ft) foam air aspirated (with foam barrel)

Excellent foam quality ▪ meets the requirements of NFPA 414

› throw range 47 m (155 ft) › expansion ratio 5:1 › quarter drainage time 135 sec

Simple and safe operation ▪ ONE HAND OPERATION: all turret functions can

be controlled directly via joystick / control handle ▪ SPEED PROPORTIONAL CONTROL: deviation

of joystick prescribes velocity of turret movement ▪ FEED BACK CONTROL: position of the control

handle prescribes position of the turret, programmable rest- and attack position

Automatic oscillation operation ▪ turret moves along a rectangle which is freely

definable in size and position ▪ enables a fully automatic turret operation Compact turret ▪ the turret is ideally suitable as bumper turret

through it's small width of only 255 mm (10 in)

Technical data

Drive electric motors, manual emergency actuation via hand wheels

Rotation range max. 330° (depending on model)

Swivel range max. -40° up to +80° with design cover

Connection flange DN50, vertical

Nozzle o-stream nozzle normal pressure, max. flow rate 2.000 l/min at 10 bar (530 gpm at 150 psi)

o-stream nozzle high pressure, max. flow rate 450 l/min at 40 bar (100 gpm at 600 psi)

ChemCore nozzle optional, integr. comb. water-/powder nozzle, max. 1.900 l/min (500 gpm) water, 1,5 kg/s (3,3 lbs/sec) powder

Nozzle adjustment electrical infinite adjustment for full/spray jet

Flow adjustment optional, electric adjustment full flow / half flow, not available for ChemCore nozzle

Foam barrel optional fix mounted, with integrated aspiration plates for improved foam quality

optional removable, with integrated aspiration plates for improved foam quality, no deflector necessary

Deflector optional, for adjusting the jet by using the foam barrel

Dry chemical nozzle optional integrated: max. flow rate 20 kg/s (44 lbs/sec)

Electric 12 V or 24 V, standard 1 LED light 10W / 900 lm, optional 1 additional LED light 10W / 900 lm

Control electronic control via CAN-bus 2.0 with absolute position detection via potentiometer

Cameras optional, FLIR integrated in cover with o-stream nozzle, on top of cover with foam barrel and deflector

PC443 2014-10_RWeb

RM15

Text and illustrations are not binding. The illustrations may show optional extras only available at extra charge. Rosenbauer retains the right to alter specifications and dimensions given herein without prior notice.

Contact

Rosenbauer International AG Paschinger Straße 90 4060 Leonding, Austria Tel.: +43 732 6794-0 Fax: +43 732 6794-91 www.rosenbauer.com

Electronically controlled turret - MJ12

www.facebook.com/rosenbauergroup

Swivel range –40° - +80° with design cover

Turret with o-stream nozzle on panther Turret with o-stream nozzle, foam barrel and deflector

Turret with o-stream nozzle on industrial vehicle