elektra_product_catalogue de la profa
TRANSCRIPT
solutionsfor everyone
electric heating systems
www.elektra.eu
Index1. Introduction 2. Products Heating Mats Single-side power supply MD7 9 11 13 15 17 19 21 23 25 27 29 30 32 33 34 4
Double-side power supply MG Single-side power supply WoodTec2
Double-side power supply WoodTec1 Single-side power supply Heating Cables Single-side power supply Single-side power supply Single-side power supply Single-side power supply SnowTec UltraTec DM VCD VCDR
Double-side power supply VC Single-side power supply Selfregulating Selfregulating Selfregulating Selfregulating Installation Accessories Towel Dryers Temperature Controllers CX OCC2 OCD4 IRcontrol DIGI2 OTN OTD2 ELR ETOG2 ETOR2 ETR2G ETR2R UTR 60-PRO ETV ETN ETI FreezeTec SelfTecPRO SelfTec (set) SelfTec (spool) SelfTecDW
36 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52
www.elektra.eu
ELEKTRA leading brandELEKTRA specializes in electric heating systems for both residential and commercial buildings. Established in 1985, the company is currently the largest and most reputable producer of floor heating systems in CentralDistribution Centre and Production Plant
Europe. From the beginning product quality has been the first priority for the company. This is the only way to satisfy all customers and achieve and maintain leadership in the market.
ELEKTRA stock availabilityThroughout the EU and around the world, ELEKTRA products are readily available through a network of approved and authorized distributors, installers and even dedicated websites.
Distribution in dozens of countries across Europe, Asia, North America and Australia
solutionsfor everyone
ELEKTRA experienceScientific research has proven that electric floor heating is theProduction process
most favourable heating system for humans, as it takes into account the physiological distribution of body temperature. All ELEKTRA products are manufactured with the knowledge of extensive scientific research and constant product development.
ELEKTRA quality and safetyELEKTRA products fulfil EU directive requirements and they are marked with the symbol. They have been tested by many reputable certificated institutes such as VDE, Underwriters Laboratories and GOST-R and have excelled in gaining approvals throughout the world.
Moreover, ELEKTRA has been accredited with certificates of quality control system like ISO 9001 and IQ NET.
www.elektra.eu
ELEKTRA Heating MatsELEKTRA MD Heating Mats are ready-to-install heating elements which are produced in accordance with EN 60335-2-96. Consisting of a thin heating cable attached to a glass fibre mesh, the system is designed for indoor use and direct heating. It should be installed directly under the surface to be heated, in either flexible tile adhesive or selflevelling compound.
Single-side power supply MD
This package contains: ELEKTRA heating mat, 'cold tails' flexible conduit, flexible conduit for the temperature sensor, capped on one end, recessed distribution box 60 mm for the temperature controller, instruction manual.
>
Technical data:100, 160 or 200 W/m2 (200 W/m2 applicable in the UK only) 230 V ~ 50/60 Hz ~ 3.9 mm 5oC +80oC 1 x 4 m; 3 x 1.00 mm2 double-core of diameter ~ 3.4 mm, conductor screen, single-side power supply ~ 7 W/m (MD100), ~ 10 W/m (MD160), ~ 12 W/m (MD200) double layer, FEP + XLPE XLPE +5%, -10% 5D IPX7 VDE, GOST-R IQNET, PCBC CE
Power output: Power supply: Mat thickness: Min. installation temperature: Max. working temperature: Conduit cables: Type of heating cable: Power output of heating cable: Insulation: Outer sheath: Rated power output tolerance: Min. radius of bending cable: Protection: Product certificates: Certificate of ISO 9001: Product mark:
ELEKTRA Heating Mats7
www.elektra.eu100 W/m2
TYPE
DIMENSIONS
SURFACE
POWER
MD 100/1.0 MD 100/1.5 MD 100/2.0 MD 100/2.5 MD 100/3.0 MD 100/3.5 MD 100/4.0 MD 100/4.5 MD 100/5.0 MD 100/6.0 MD 100/8.0 MD 100/10.0 MD 100/12.0
mxm0.5 x 2.0 0.5 x 3.0 0.5 x 4.0 0.5 x 5.0 0.5 x 6.0 0.5 x 7.0 0.5 x 8.0 0.5 x 9.0 0.5 x 10.0 0.5 x 12.0 0.5 x 16.0 0.5 x 20.0 0.5 x 24.0
m
2
W100 150 200 250 300 350 400 450 500 600 800 1000 1200
1.00 1.50 2.00 2.50 3.00 3.50 4.00 4.50 5.00 6.00 8.00 10.00 12.00
160 W/m
2
TYPE
DIMENSIONS
SURFACE
POWER
MD 160/0.5 MD 160/1.0 MD 160/1.5 MD 160/2.0 MD 160/2.5 MD 160/3.0 MD 160/3.5 MD 160/4.0 MD 160/5.0 MD 160/6.0 MD 160/7.0 MD 160/8.0 MD 160/9.0 MD 160/10.0
mxm0.5 x 1.0 0.5 x 2.0 0.5 x 3.0 0.5 x 4.0 0.5 x 5.0 0.5 x 6.0 0.5 x 7.0 0.5 x 8.0 0.5 x 10.0 0.5 x 12.0 0.5 x 14.0 0.5 x 16.0 0.5 x 18.0 0.5 x 20.0
m
2
W80 160 240 320 400 480 560 640 800 960 1120 1280 1440 1600
0.50 1.00 1.50 2.00 2.50 3.00 3.50 4.00 5.00 6.00 7.00 8.00 9.00 10.00
200 W/m (applicable in the UK only)TYPE DIMENSIONS SURFACE POWER
2
MD 200/1.0 MD 200/1.5 MD 200/2.0 MD 200/2.5 MD 200/3.0 MD 200/3.5 MD 200/4.0 MD 200/4.5 MD 200/5.0 MD 200/6.0 MD 200/7.0 MD 200/8.0 MD 200/10.0
mxm0.5 x 2.0 0.5 x 3.0 0.5 x 4.0 0.5 x 5.0 0.5 x 6.0 0.5 x 7.0 0.5 x 8.0 0.5 x 9.0 0.5 x 10.0 0.5 x 12.0 0.5 x 14.0 0.5 x 16.0 0.5 x 20.0
m
2
W200 300 400 500 600 700 800 900 1000 1200 1400 1600 2000
ELEKTRA Heating Mats
1.00 1.50 2.00 2.50 3.00 3.50 4.00 4.50 5.00 6.00 7.00 8.00 10.00
>
Accessories:
Temperature controllers page 38-44, 50
8
ELEKTRA Heating MatsELEKTRA MG Heating Mats are ready-to-install heating elements which are produced in accordance with EN 60335-2-96. Consisting of a thin heating cable attached to a glass fibre mesh, the system is designed for indoor use and direct heating. It should be installed directly under the surface to be heated, in either flexible tile adhesive or selflevelling compound.
Double-side power supply MG
This package contains: ELEKTRA heating mat, 'cold tails' flexible conduit, flexible conduit for the temperature sensor, capped on one end, recessed distribution box 60 mm for the temperature controller, instruction manual.
>
Technical data:100 or 160 W/m2 230 V ~ 50/60 Hz ~ 3 mm 5oC +80oC 2 x 4 m; 2 x 1.0 mm2 one-core of diameter ~ 2.5 mm, conductor screen, double-side power supply ~ 7 W/m (MG100), ~ 10 W/m (MG160) double layer, FEP + HDPE XLPE +5%, -10% 5D IPX7 VDE, GOST-R IQNET, PCBC CE
Power output: Power supply: Mat thickness: Min. installation temperature: Max. working temperature: Conduit cables: Type of heating cable: Power output of heating cable: Insulation: Outer sheath: Rated power output tolerance: Min. radius of bending cable: Protection: Product certificates: Certificate of ISO 9001: Product mark:
ELEKTRA Heating Mats9
www.elektra.eu
2 100 W/m *
TYPE
DIMENSIONS
SURFACE
POWER
MG 100/1.0 MG 100/1.5 MG 100/2.0 MG 100/2.5 MG 100/3.0 MG 100/3.5 MG 100/4.5 MG 100/5.0 MG 100/6.0 MG 100/8.0 MG 100/9.0 MG 100/10.0 MG 100/12.0
mxm0.5 x 2.0 0.5 x 3.0 0.5 x 4.0 0.5 x 5.0 0.5 x 6.0 0.5 x 7.0 0.5 x 9.0 0.5 x 10.0 0.5 x 12.0 0.5 x 16.0 0.5 x 18.0 0.5 x 20.0 0.5 x 24.0
m
2
W100 150 200 250 300 350 450 500 600 800 900 1000 1200
1.00 1.50 2.00 2.50 3.00 3.50 4.50 5.00 6.00 8.00 9.00 10.00 12.00
160 W/m
2
TYPE
DIMENSIONS
SURFACE
POWER
MG 160/1.0 MG 160/1.5 MG 160/2.0 MG 160/2.5 MG 160/3.0 MG 160/3.5 MG 160/4.0 MG 160/5.0 MG 160/6.0 MG 160/7.0 MG 160/8.0 MG 160/9.0 MG 160/10.0
mxm0.5 x 2.0 0.5 x 3.0 0.5 x 4.0 0.5 x 5.0 0.5 x 6.0 0.5 x 7.0 0.5 x 8.0 0.5 x 10.0 0.5 x 12.0 0.5 x 14.0 0.5 x 16.0 0.5 x 18.0 0.5 x 20.0
m
2
W160 240 320 400 480 560 640 800 960 1120 1280 1440 1600
1.00 1.50 2.00 2.50 3.00 3.50 4.00 5.00 6.00 7.00 8.00 9.00 10.00
* ELEKTRA MG 100 available until the stock lasts.
ELEKTRA Heating Mats
>
Accessories:
Temperature controllers page 38-44, 50
10
ELEKTRA Heating MatsELEKTRA WoodTec2 Heating Mats are ready-to-install heating elements which are produced in accordance with EN 60335-2-96. Consisting of a very thin heating cable attached to a glass fibre mesh and aluminum foil, the system is designed for indoor use and direct heating. It should be installed directly under laminate flooring and/or engineered wood.
Single-side power supply WoodTec2
This package contains: ELEKTRA WoodTec2 heating mat, 'cold tails' flexible conduit, flexible conduit for the temperature sensor, recessed distribution box 60 mm for the temperature controller, aluminum adhesive tape, instruction manual.
>
Technical data:70 W/m2 (140 W/m2 applicable in the UK only) 230 V ~ 50/60 Hz ~ 2.8 mm 5oC +80oC 1 x 4 m; 3 x 1.0 mm2 double-core of diameter ~ 2.3 mm, single-side power supply ~ 3 W/m (WoodTec2 70), ~ 6 W/m (WoodTec2 140) double layer, FEP + XLPE +5%, -10% 5D IPX7 B IQNET, PCBC CE
Power output: Power supply: Mat thickness: Min. installation temperature: Max. working temperature: Conduit cables: Type of heating cable: Power output of heating cable: Insulation: Rated power output tolerance: Min. radius of bending cable: Protection: Product certificates: Certificate of ISO 9001: Product mark:
11
ELEKTRA Heating Mats
www.elektra.eu
70 W/m
2
TYPE
DIMENSIONS
SURFACE
POWER
WoodTec2 70/2.0 WoodTec2 70/3.0 WoodTec2 70/4.0 WoodTec2 70/6.0 WoodTec2 70/8.0 WoodTec2 70/11.0 WoodTec2 70/13.0
mxm0.5 x 4.0 0.5 x 6.0 0.5 x 8.0 0.5 x 12.0 0.5 x 16.0 0.5 x 22.0 0.5 x 26.0
m
2
W140 210 280 420 560 770 910
2.00 3.00 4.00 6.00 8.00 11.00 13.00
140 W/m (applicable in the UK only)TYPE DIMENSIONS SURFACE POWER
2
WoodTec2 140/3.0 WoodTec2 140/4.0 WoodTec2 140/5.0 WoodTec2 140/6.0 WoodTec2 140/8.0 WoodTec2 140/10.0
mxm0.5 x 6.0 0.5 x 8.0 0.5 x 10.0 0.5 x 12.0 0.5 x 16.0 0.5 x 20.0
m
2
W420 560 700 840 1120 1400
3.00 4.00 5.00 6.00 8.00 10.00
ELEKTRA Heating Mats
>
Accessories:
Temperature controllers page 38-44, 50
12
ELEKTRA Heating MatsELEKTRA WoodTec1 Heating Mats are ready-to-install heating elements which are produced in accordance with EN 60335-2-96. Consisting of a very thin heating cable attached to a glass fibre mesh and aluminum foil, the system is designed for indoor use and direct heating. It should be installed directly under laminate flooring and/or engineered wood.
Double-side power supply WoodTec1
This package contains: ELEKTRA WoodTec1 heating mat, 'cold tails' flexible conduit, flexible conduit for the temperature sensor, recessed distribution box 60 mm for the temperature controller, 2 electrical connectors, aluminum adhesive tape, instruction manual.
>
Technical data:60 W/m2 230 V ~ 50/60 Hz ~ 1.5 mm 5oC +80oC 2 x 4 m; 2 x 1.0 mm2 one-core of diameter ~ 1.3 mm, double-side power supply ~ 3 W/m double layer, FEP + HDPE +5%, -10% 5D IPX7 B, GOST-R IQNET, PCBC CE
Power output: Power supply: Mat thickness: Min. installation temperature: Max. working temperature: Conduit cables: Type of heating cable: Power output of heating cable: Insulation: Rated power output tolerance: Min. radius of bending cable: Protection: Product certificates: Certificate of ISO 9001: Product mark:
13
ELEKTRA Heating Mats
www.elektra.eu
60 W/m
2
TYPE
DIMENSIONS
SURFACE
POWER
WoodTec1 60/2.0 WoodTec1 60/3.0 WoodTec1 60/4.0 WoodTec1 60/6.0 WoodTec1 60/8.0 WoodTec1 60/10.0 WoodTec1 60/12.0
mxm0.5 x 4.0 0.5 x 6.0 0.5 x 8.0 0.5 x 12.0 0.5 x 16.0 0.5 x 20.0 0.5 x 24.0
m
2
W120 180 240 360 480 600 720
2.00 3.00 4.00 6.00 8.00 10.00 12.00
ELEKTRA Heating Mats
>
Accessories:
Temperature controllers page 38-44, 50
14
ELEKTRA Heating MatsELEKTRA SnowTec Heating Mats are ready-to-install heating elements, composed of an ELEKTRA VCD heating cable produced in accordance with EN 60335-1. The cable is secured with unique tape in the mat shape. This system is designed for outdoor use to protect against snow and ice on driveways, walkways, ramps, etc.
Single-side power supply SnowTec
This package contains: ELEKTRA SnowTec heating mat, instruction manual.
>
Technical data:300 W/m2 230 V, 400 V ~ 50/60 Hz ~ 7.5 mm 5oC +80oC 1 x 4m; 3 x 1.5 mm2 or 3 x 2.5 mm2 double-core of diameter ~ 5 x 7 mm, conductor screen, single-side power supply 30 W/m XLPE heat resistant PVC +5%, -10% 5D IPX7 IQNET, PCBC CE
Power output: Power supply: Mat thickness: Min. installation temperature: Max. working temperature: Conduit cables: Type of heating cable: Power output of heating cable: Insulation: Outer sheath: Rated power output tolerance: Min. radius of bending cable: Protection: Certificate of ISO 9001: Product mark:
15
ELEKTRA Heating Mats
www.elektra.eu
230VTYPE DIMENSIONS POWER
SnowTec SnowTec SnowTec SnowTec SnowTec SnowTec SnowTec SnowTec SnowTec 300/2 300/3 300/4 300/5 300/7 300/10 300/13 300/16 300/21
mxm0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 x x x x x x x x x 2 3 4 5 7 10 13 16 21
W400 520 670 930 1140 1860 2560 2890 3730
400VTYPE DIMENSIONS POWER
SnowTec SnowTec SnowTec SnowTec SnowTec SnowTec SnowTec SnowTec SnowTec SnowTec SnowTec 300/2 400V 300/3 400V 300/4 400V 300/5 400V 300/7 400V 300/9 400V 300/11 400V 300/13 400V 300/15 400V 300/20 400V 300/25 400V
mxm0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 x x x x x x x x x x x 2 3 4 5 7 9 11 13 15 20 25
W400 600 820 950 1360 1680 2100 2360 2650 3550 4600
ELEKTRA Heating Mats
>
Accessories:
Temperature controllers page 45 and 47
16
ELEKTRA Heating CablesELEKTRA UltraTec Heating Cables are ready-to-install heating sets which are produced in accordance with EN 60335-1. They consist of an ultra-thin, high temperature resistant cable, terminated with a cold tail. This system is designed for indoor use and direct heating. It should be installed directly under the surface to be heated, in either flexible tile adhesive or self-levelling compound.
Single-side power supply UltraTec
This package contains: ELEKTRA heating cable (on a spool), self-adhesive installation tape, 'cold tails' flexible conduit, flexible conduit for the temperature sensor, capped on one end, recessed distribution box 60 mm for the temperature controller, instruction manual.
>
Technical data:10 W/m 230 V ~ 50/60 Hz ~ 2 x 3 mm 20oC +150oC 1 x 2.5 m; 2 x 1.0 mm2; conductor screen double-core, conductor screen, single-side power supply FEP FEP +5%, -10% 5D IPX7 B IQNET, PCBC CE
Power output: Power supply: External dimension of cable: Min. installation temperature: Max. working temperature: Conduit cables: Type of heating cable: Insulation: Outer sheath: Rated power output tolerance: Min. radius of bending cable: Protection: Product certificates: Certificate of ISO 9001: Produkt mark:
17
ELEKTRA Heating Cables
www.elektra.eu
TYPE
LENGTH
POWER
UltraTec 10/90 UltraTec 10/130 UltraTec 10/150 UltraTec 10/220 UltraTec 10/280 UltraTec 10/320 UltraTec 10/400 UltraTec 10/450 UltraTec 10/550 UltraTec 10/690 UltraTec 10/780 UltraTec 10/980 UltraTec 10/1100 UltraTec 10/1320 UltraTec 10/1650 UltraTec 10/2050
m9 13 15 22 28 32 40 45 55 69 78 98 110 132 165 205
W90 130 150 220 280 320 400 450 550 690 780 980 1100 1320 1650 2050
ELEKTRA Heating Cables
>
Accessories:
Temperature controllers page 38-44, 50
18
ELEKTRA Heating CablesELEKTRA DM Heating Cables are ready-to-install heating sets which are produced in accordance with EN 60335-1. A thin heating cable of the length depending on the model, has factory connected cold tail cable. This system is designed for indoor use and direct heating. It should be installed directly under the surface to be heated, in either flexible tile adhesive or self-levelling compound.
Single-side power supply DM
This package contains: ELEKTRA heating cable (on a spool), self-adhesive installation tape, 'cold tails' flexible conduit, flexible conduit for the temperature sensor, capped on one end, recessed distribution box 60 mm for the temperature controller, instruction manual.
>
Technical data:10 W/m 230 V ~ 50/60 Hz ~ 4.3 mm 5oC +80oC 1 x 2.5 m; 2 x 1.0 mm2; conductor screen double-core, conductor screen, single-side power supply double layer, FEP + XLPE heat resistant PVC +5%, -10% 5D IPX7 B, GOST-R IQNET, PCBC CE
Power output: Power supply: Diameter of cable: Min. installation temperature: Max. working temperature: Conduit cables: Type of heating cable: Insulation: Outer sheath: Rated power output tolerance: Min. radius of bending cable: Protection: Product certificates: Certificate of ISO 9001: Produkt mark:
19
ELEKTRA Heating Cables
www.elektra.eu
TYPE
LENGTH
POWER
DM 10/90 DM 10/130 DM 10/150 DM 10/220 DM 10/280 DM 10/320 DM 10/400 DM 10/450 DM 10/550 DM 10/690 DM 10/780 DM 10/980 DM 10/1100 DM 10/1320 DM 10/1650 DM 10/2050
m9 13 15 22 28 32 40 45 55 69 78 98 110 132 165 205
W90 130 150 220 280 320 400 450 550 690 780 980 1100 1320 1650 2050
ELEKTRA Heating Cables
>
Accessories:
Temperature controllers page 38-44, 50
20
ELEKTRA Heating CablesELEKTRA VCD Heating Cables are ready-to-install heating sets which are produced in accordance with EN 60335-1. Heating cable of the length depending on the model, has factory connected cold tail cable. Typical use: VCD10 - floor heating (installation in mortar), antifrost protection of pipes. VCD17 - floor heating (installation in mortar). VCD25 - protection against snow and ice of external surfaces e.g. driveways, walkways, ramps, etc.
Single-side power supply VCD
This package contains: ELEKTRA heating cable (on a spool), instruction manual.
>
Technical data:10, 17 or 25 W/m 230 V and 400 V (VCD 25 only) ~ 50/60 Hz ~ 5 x 7 mm 5oC +80oC 1 x 2.5 m; 3 x 1.0 mm2, 3 x 1.5 mm2 or 3 x 2.5 mm2 double-core, conductor screen, single-side power supply XLPE heat resistant PVC +5%, -10% 3.5 D IPX7 B, GOST-R IQNET, PCBC CE
Power output: Power supply: External dimension of cable: Min. installation temperature: Max. working temperature: Conduit cables: Type of heating cable: Insulation: Outer sheath: Rated power output tolerance: Min. radius of bending cable: Protection: Product certificates: Certificate of ISO 9001: Product mark:
21
ELEKTRA Heating Cables
www.elektra.eu10 W/mTYPE VCD 10/70 VCD 10/90 VCD 10/110 VCD 10/130 VCD 10/170 VCD 10/200 VCD 10/230 VCD 10/260 VCD 10/310 VCD 10/360 VCD 10/410 VCD 10/460 VCD 10/550 VCD 10/710 VCD 10/900 VCD 10/1100 VCD 10/1220 VCD 10/1470 VCD 10/1560 VCD 10/1730 VCD 10/1900 VCD 10/2070 VCD 10/2250
17 W/mLENGTH m7 9 11 13 17 20 23 26 31 36 41 46 55 71 90 110 122 147 156 173 190 207 225
25 W/mLENGTH m6 8 10 13 15 17 20 23 27 31 35 42 54 69 84 94 113 120 133 146 160 172
POWER W70 90 110 130 170 200 230 260 310 360 410 460 550 710 900 1100 1220 1470 1560 1730 1900 2070 2250
TYPE VCD 17/100 VCD 17/135 VCD 17/170 VCD 17/220 VCD 17/255 VCD 17/285 VCD 17/340 VCD 17/390 VCD 17/460 VCD 17/530 VCD 17/595 VCD 17/710 VCD 17/915 VCD 17/1170 VCD 17/1425 VCD 17/1595 VCD 17/1920 VCD 17/2040 VCD 17/2260 VCD 17/2480 VCD 17/2720 VCD 17/2920
POWER W100 135 170 220 255 285 340 390 460 530 595 710 915 1170 1425 1595 1920 2040 2260 2480 2720 2920
TYPE VCD 25/100 VCD 25/175 VCD 25/250 VCD 25/300 VCD 25/350 VCD 25/400 VCD 25/475 VCD 25/550 VCD 25/650 VCD 25/700 VCD 25/875 VCD 25/1100 VCD 25/1425 VCD 25/1750 VCD 25/1925 VCD 25/2250 VCD 25/2450 VCD 25/2750 VCD 25/3000 VCD 25/3250 VCD 25/3550
LENGTH m4 7 10 12 14 16 19 22 26 28 35 44 57 70 77 90 98 110 120 130 142
POWER W100 175 250 300 350 400 475 550 650 700 875 1100 1425 1750 1925 2250 2450 2750 3000 3250 3550
25 W/m 400VTYPE VCD 25/200 400V VCD 25/300 400V VCD 25/470 400V VCD 25/550 400V VCD 25/635 400V VCD 25/745 400V VCD 25/870 400V VCD 25/1020 400V VCD 25/1140 400V VCD 25/1270 400V VCD 25/1570 400V VCD 25/1930 400V VCD 25/2530 400V VCD 25/3050 400V VCD 25/3350 400V VCD 25/3970 400V VCD 25/4280 400V VCD 25/4800 400V VCD 25/5260 400V VCD 25/5600 400V VCD 25/6250 400V
LENGTH POWER m8 12 18 22 26 29 35 40 46 51 62 77 100 121 133 159 172 191 210 223 247
W200 300 470 550 635 745 870 1020 1140 1270 1570 1930 2530 3050 3350 3970 4280 4800 5260 5600 6250
ELEKTRA Heating Cables
>
Accessories:
Temperature controllers page 38-45, 47, 50-52 Installation accessories page 34 and 35
22
ELEKTRA Heating CablesELEKTRA VCDR Heating Cables are ready-to-install heating sets which are produced in accordance with EN 60335-2-83. Heating cable of the length depending on the model, has factory connected cold tail cable. A system designed for outdoor use to protect roofs, gutters and downpipes against snow and ice.
Single-side power supply VCDR
This package contains: ELEKTRA heating cable (on a spool), instruction manual.
>
Technical data:20 W/m 230 V ~ 50/60 Hz ~ 5 x 7 mm 5oC +80oC 1 x 4 m; 3 x 1.0 mm2 or 3 x 1.5 mm2, rubber outer jacket double-core, conductor screen, single-side power supply XLPE heat and UV resistant PVC +5%, -10% 3.5 D IPX7 B, GOST-R IQNET, PCBC CE
Power output: Power supply: External dimension of cable: Min. installation temperature: Max. working temperature: Conduit cables: Type of heating cable: Insulation: Outer sheath: Rated power output tolerance: Min. radius of bending cable: Protection: Product certificates: Certificate of ISO 9001: Product mark:
23
ELEKTRA Heating Cables
www.elektra.eu
TYPE
LENGTH
POWER
VCDR 20/180 VCDR 20/240 VCDR 20/320 VCDR 20/380 VCDR 20/520 VCDR 20/580 VCDR 20/800 VCDR 20/1000 VCDR 20/1140 VCDR 20/1300 VCDR 20/1560 VCDR 20/1720 VCDR 20/2040 VCDR 20/2360 VCDR 20/2700 VCDR 20/3000 VCDR 20/3400
m9 12 16 19 26 29 40 50 57 65 78 86 102 118 135 150 170
W180 240 320 380 520 580 800 1000 1140 1300 1560 1720 2040 2360 2700 3000 3400
Other types available on special order.
ELEKTRA Heating Cables
>
Accessories:
Temperature controllers page 46 and 48 Installation accessories page 34
24
ELEKTRA Heating CablesELEKTRA VC Heating Cables are ready-to-install heating sets which are produced in accordance with EN 60335-1. Heating cable of the length depending on the model, has factory connected cold tail cable. Typical use: VC10 - floor heating (installation in mortar), antifrost protection of pipes. VC15 - floor heating (installation in mortar). VC20 - floor heating (installation in mortar), protection against snow and ice of external surfaces e.g. driveways, walkways, ramps, etc.
Double-side power supply VC
This package contains: ELEKTRA heating cable (on a spool), instruction manual.
>
Technical data:10, 15 or 20 W/m 230 V ~ 50/60 Hz ~ 5 mm 5oC +80oC 2 x 2.5 m; 2 x 1.0 mm2, 2 x 1.5 mm2 or 2 x 2.5 mm2 one-core, conductor screen, double-side power supply XLPE heat resistant PVC +5%, -10% 3.5 D IPX7 B, GOST-R IQNET, PCBC CE
Power output: Power supply: Diameter of cable: Min. installation temperature: Max. working temperature: Conduit cables: Type of heating cable: Insulation: Outer sheath: Rated power output tolerance: Min. radius of bending cable: Protection: Product certificates: Certificate of ISO 9001: Product mark:
25
ELEKTRA Heating Cables
www.elektra.eu
10 W/m*TYPE VC 10/70 VC 10/95 VC 10/120 VC 10/145 VC 10/180 VC 10/230 VC 10/280 VC 10/320 VC 10/370 VC 10/440 VC 10/510 VC 10/580 VC 10/640 VC 10/780 VC 10/1010 VC 10/1270 VC 10/1550 VC 10/1730 VC 10/2080 VC 10/2200 VC 10/2450 VC 10/2690 VC 10/2940 VC 10/3180
15 W/m*LENGTH m7 10 12 15 18 23 28 32 37 44 51 58 64 78 101 127 155 173 208 220 245 269 294 318
20 W/mLENGTH m6 8 10 12 15 19 23 26 30 36 42 48 53 64 83 104 127 141 170 180 200 220 240 260
POWER W70 95 120 145 180 230 280 320 370 440 510 580 640 780 1010 1270 1550 1730 2080 2200 2450 2690 2940 3180
TYPE VC 15/90 VC 15/120 VC 15/150 VC 15/180 VC 15/220 VC 15/285 VC 15/345 VC 15/390 VC 15/450 VC 15/540 VC 15/630 VC 15/720 VC 15/795 VC 15/960 VC 15/1240 VC 15/1560 VC 15/1900 VC 15/2110 VC 15/2550 VC 15/2700 VC 15/3000 VC 15/3300 VC 15/3600 VC 15/3900
POWER W90 120 150 180 220 285 345 390 450 540 630 720 795 960 1240 1560 1900 2110 2550 2700 3000 3300 3600 3900
TYPE VC 20/100 VC 20/140 VC 20/170 VC 20/205 VC 20/255 VC 20/320 VC 20/400 VC 20/460 VC 20/520 VC 20/620 VC 20/720 VC 20/820 VC 20/920 VC 20/1100 VC 20/1420 VC 20/1800 VC 20/2200 VC 20/2460 VC 20/2920 VC 20/3120 VC 20/3460 VC 20/3800 VC 20/4140 VC 20/4500
LENGTH m5 7 9 10 13 16 20 23 26 31 36 41 46 55 71 90 110 123 146 156 173 190 207 225
POWER W100 140 170 205 255 320 400 460 520 620 720 820 920 1100 1420 1800 2200 2460 2920 3120 3460 3800 4140 4500
* ELEKTRA VC10 and VC15 available only on special order.
ELEKTRA Heating Cables
>
Accessories:
Temperature controllers page 38-45, 47, 50-52 Installation accessories page 34 and 35
26
ELEKTRA Heating CablesELEKTRA FreezeTec Heating Cables are ready-to-install heating sets. They consist of the ELEKTRA VCD heating cable with integrated thermostat ending in conduit cable with hermetic plug. An antifrost protection system for pipes and other objects which may be damaged by low temperatures.
Single-side power supply FreezeTec
This package contains: ELEKTRA FreezeTec heating cable, 5, 10 or 20 m of self-adhesive installation tape, instruction manual.
>
Technical data:12 W/m 230 V ~ 50/60 Hz ~ 5 x 7 mm 5oC +70oC 1 x 1.5 m; 3 x 0.75 mm2; with the plug double-core, conductor screen, single-side power supply XLPE heat resistant PVC +5%, -10% 3.5 D built-in bimetallic thermostat ON: OFF: +3oC +10oC IPX7 EZU, GOST-R IQNET, PCBC CE
Power output: Power supply: External dimension of cable: Min. installation temperature: Max. working temperature: Conduit cables: Type of heating cable: Insulation: Outer sheath: Rated power output tolerance: Min. radius of bending cable: Control:
Protection: Product certificates: Certificate of ISO 9001: Product mark:
27
ELEKTRA Heating Cables
www.elektra.eu
TYPE
LENGTH
POWER
FreezeTec 12/2 FreezeTec 12/3 FreezeTec 12/5 FreezeTec 12/7 FreezeTec 12/10 FreezeTec 12/15 FreezeTec 12/21 FreezeTec 12/30 FreezeTec 12/42
m2 3 5 7 10 15 21 30 42
W24 36 60 84 120 180 252 360 504
28
ELEKTRA Heating Cables
ELEKTRA Heating CablesELEKTRA SelfTec PRO Selfregulating Heating Cables on a spool. An advanced antifrost protection system for pipes, gutters, downpipes, valves and other objects which may be damaged by low temperatures.ELEKTRA SelfTecPROPower [W/m] 60
Selfregulating SelfTecPRO
40
20
This package contains: ELEKTRA SelfTecPRO heating cable on a spool.-20 ELEKTRA SelfTecPRO 33 ELEKTRA SelfTec PRO 20 ELEKTRA SelfTecPRO 10
0 0 20 40 60 Temperature [oC]
>
Technical data:10, 20 or 33 W/m 230 V ~ 50/60 Hz ~ 6 x 11 mm (10, 20 W/m), ~ 6 x 13 mm (33 W/m) 25oC +65oC +85oC (power-on, 1000h - cumulative) selfregulating, conductor screen, single-side power supply tin-coated copper 2 x 1.00 mm2 (10, 20 W/m), 2 x 1.25 mm2 (33 W/m) modified polyolefin UV resistant, halogen free polyolefin 3.5 D IPX7 150 m (10 W/m), 110 m (20 W/m), 108 m (33 W/m) 16 A (10, 20 W/m), 30 A (33 W/m) GOST-R IQNET, PCBC CE EC-PRO joint set
Power output (+10oC): Power supply: External dimension of cable: Min. installation temperature: Max. working temperature: Max. exposure temperature: Type of heating cable: Conductor: Insulation: Outer sheath: Min. radius of bending cable: Protection: Max. cable length per circuit (+10oC): Max. circuit-breaker, C-type: Product certificates: Certificate of ISO 9001: Product mark:
>
Accessories:
ECM25-PRO joint set with M25 gland
EC-PRO joint set KF 5045-PRO junction box ECM25-PRO joint set with M25 gland Temperature controllers page 46, 48-49, 52 Installation accessories page 34 and 35
29
ELEKTRA Heating Cables
KF 5045-PRO junction box
www.elektra.euSelfregulating SelfTec (set)
ELEKTRA Heating CablesELEKTRA SelfTec Selfregulating Heating Cables are ready-toinstall heating sets. They consist of heating cable ending in conduit cable with hermetic plug. An antifrost protection system for pipes, gutters, downpipes, valves and other objects which may be damaged by low temperatures.
ELEKTRA SelfTecPower [W/m]
20
This package contains: ELEKTRA SelfTec heating cable, 5 or 10 m of self-adhesive installation tape, instruction manual.0 -20 ELEKTRA SelfTec 16 0 20 40 60 Temperature [oC] 10
>
Technical data:16 W/m 230 V ~ 50/60 Hz ~ 6 x 8 mm 25oC +65oC +65oC (power-on, 1000h - cumulative) 1 x 3 m; 3 x 0.75 mm2 or 3 x 1.0 mm2, with the plug selfregulating, conductor screen, single-side power supply tin-coated copper 2 x 0.6 mm2 modified polyolefin UV resistant, halogen free polyolefin 3.5 D IPX7 B, GOST-R IQNET, PCBC CE
Power output (+10oC): Power supply: External dimension of cable: Min. installation temperature: Max. working temperature:
ELEKTRA Heating Cables
Max. exposure temperature: Conduit cables: Type of heating cable: Conductor: Insulation: Outer sheath: Min. radius of bending cable: Protection: Product certificates: Certificate of ISO 9001: Product mark:
30
TYPE
LENGTH
POWER (+10 C)
o
SelfTec 16/1 SelfTec 16/2 SelfTec 16/3 SelfTec 16/5 SelfTec 16/7 SelfTec 16/10 SelfTec 16/15 SelfTec 16/20 SelfTec 16/X
m1 2 3 5 7 10 15 20 length acc. to order (up. to 72 m)
W16 32 48 80 112 160 240 320
>
Accessories:
Temperature controllers page 46, 48, 50, 52 Installation accessories page 34 and 35
31
ELEKTRA Heating Cables
www.elektra.euSelfregulating SelfTec (spool)
ELEKTRA Heating CablesELEKTRA SelfTec Selfregulating Heating Cables on a spool. An antifrost protection system for pipes, gutters, downpipes, valves and other objects which may be damaged by low temperatures.ELEKTRA SelfTecPower [W/m]
20
This package contains: ELEKTRA SelfTec heating cable on a spool.
10
0 -20 ELEKTRA SelfTec 16 ELEKTRA SelfTec 10 0 20 40 60 Temperature [oC]
>EC-PRO joint set
Technical data:10 or 16 W/m 230 V ~ 50/60 Hz ~ 6 x 8 mm 25oC +65oC +65oC (power-on, 1000h - cumulative) selfregulating, conductor screen, single-side power supply tin-coated copper 2 x 0.6 mm2 modified polyolefin UV resistant, halogen free polyolefin 3.5 D IPX7 100 m (10 W/m), 72 m (16 W/m) 10 A B, GOST-R IQNET, PCBC CE
Power output (+10oC): Power supply: External dimension of cable: Min. installation temperature: Max. working temperature: Max. exposure temperature: Type of heating cable: Conductor: Insulation: Outer sheath: Min. radius of bending cable: Protection: Max. cable length per circuit (+10oC): Max. circuit-breaker, C-type: Product certificates: Certificate of ISO 9001: Product mark:
ELEKTRA Heating Cables
>
Accessories:
EC-PRO joint set Temperature controllers page 46, 48, 50, 52 Installation accessories page 34
32
ELEKTRA Heating CablesELEKTRA SelfTec DW Selfregulating Heating Cables. An antifrost protection system. Certfied for drinking water applications, e.g. inside of pipes.
Selfregulating SelfTecDW
ELEKTRA SelfTecDWPower [W/m]
16
12
8
4
This package contains: ELEKTRA SelfTecDW heating cable-20 ELEKTRA SelfTec DW
0 0 20 40 60 Temperature [ C]o
on a spool.
>
Technical data:10 W/m 230 V ~ 50/60 Hz ~ 6 x 8 mm 25oC +65oC +65oC (power-on, 1000h - cumulative) selfregulating, conductor screen, single-side power supply tin-coated copper 0.6 mm2 modified polyolefin LDPE, certified for drinking water applications 3.5 D IPX7 60 m 2 x 10 A GOST-R, Certfied for drinking water applications IQNET, PCBC CE Leadthrough EC-PRO joint set
Power output (+10oC): Power supply: External dimension of cable: Min. installation temperature: Max. working temperature: Max. exposure temperature: Type of heating cable: Conductor: Insulation: Outer sheath: Min. radius of bending cable: Protection: Max. cable length per circuit (+10oC): Max. circuit-breaker, C-type: Product certificates: Certificate of ISO 9001: Product mark:
>
Accessories:
EC-PRO joint set Leadthrough (1/2", 3/4" & 1" set) Temperature controllers page 50 and 52
33
ELEKTRA Heating Cables
www.elektra.euELEKTRA Installation AccessoriesInstallation Tapes TME TME 10 (10 m), TME 15 (15 m), TME 25 (25 m) Thickness: ~ 0.8mm, Substance: aluminium
Installation Tape TMS TMS 10 (10 m) Thickness: ~ 1.0 mm, Substance: zinc-coated steel
Roof runner installation tape (0.5 m) Width: 25 mm Substance: aluminium (0.8 mm) with special self-adhesive tape suitable for metal and PVC Gutter spacing wire with clips (20 m) The distance between the holders along the wire: 40 cm
Downpipe spacing wire with clips (20 m) The distance between the holders along the wire: 40 cm
Roof runner installation band (1 m)
Gutter holder (25 pieces)
ELEKTRA Installation Accessories
Downpipe spacing clip (25 pieces)
Roof edge installation holder (25 pieces) Substance: ZnTi or Cu
34
Underfloor heating installation monitor Monitoring device for detection of damages occurring during heating mats and cables installation
Self-adhesive installation tape (5, 10 or 20 m)
Self-adhesive aluminium foil (5 m, 10 m, 25 m, 45 m) Width: 50 mm
Tape-PRO Self-adhesive aluminium foil of increased mechanical durability (100 m) Width: 50 mm
35
ELEKTRA Installation Accessories
www.elektra.euCX 700, CX 800, CX 900
ELEKTRA Towel DryersELEKTRA Towel Dryers are adjusted to dry and warm clothes and towels, and to heat up spaces. They are produced in accordance with EN 60335-2-43:2002. The Dryer is composed of ladder shaped metal tubes with heating cable installed inside the tubes.
This package contains: ELEKTRA dryer, installation set, instruction manual.
>
Technical data:95 230 W 230 V ~ 50/60 Hz 25 mm 60oC 1 x 2 m, 3 x 1.5 mm2, end of plug (CX xxx) or connection through the bracket without plug (CX xxxN)
Power output: Power supply: Tubes diameter: Max. working temperature (constant):
ELEKTRA Towel Dryers
Conduit cables:
Type of heating cable: Certificate of ISO 9001: Product mark:
one-core silicon insulated PCBC, IQNET CE
36
Standard version. Power lead with plug.TYPE DIMENSIONS POWER COLOUR
CX 700 CX 700r CX 700c CX 800 CX 800r CX 800c CX 900 CX 900r CX 900c
width x height (mm)527 x 697 527 x 697 527 x 697 527 x 997 527 x 997 527 x 997 527 x 1227 527 x 1227 527 x 1227
W130 130 95 175 175 175 230 230 230
White RAL Chromium White RAL Chromium White RAL Chromium
Special version. Power lead without plug. Connection through the bracket.TYPE DIMENSIONS POWER COLOUR
CX 700N CX 700Nr CX 700Nc CX 800N CX 800Nr CX 800Nc CX 900N CX 900Nr CX 900Nc
width x height (mm)527 x 697 527 x 697 527 x 697 527 x 997 527 x 997 527 x 997 527 x 1227 527 x 1227 527 x 1227
W130 130 95 175 175 175 230 230 230
White RAL Chromium White RAL Chromium White RAL Chromium
37
ELEKTRA Towel Dryers
www.elektra.euElectronic programmable OCC2
ELEKTRA Temperature ControllersThe Electronic 4-event Temperature Controller ELEKTRA OCC2 is designed for heating systems, especially for electric floor heating. Produced in accordance with EN 60730-1 and EN 60730-2-9. It consists of controller and floor sensor.
This package contains:Type OCC2-1991 controller OCC2, floor temperature sensor with 3 m tail (ETF-144/99), programming instruction, instruction manual.
>
Technical data:230 V ~ 50/60 Hz 16A, 230 V ~ 50/60 Hz flush mounting 2-pole, 16A 4 programmable events for each day +5oC +40oC for each event +5oC +40oC for each event +5oC +40oC to the next event or to the cancellation 0.4K IP 21 display function 80 x 80 x 48 mm 25 x 22 mm GOST-R CE
Power supply: Max. load: Installation: Built-in switch: ETF-144/99 Clock functions: Comfort temperature range: Economical temperature range: Manual work mode: temperature range: work time: Difference/Hysteresis: Protection: Work signalization: Dimensions (H x W x D): Display dimensions (H x W): Certificates: Product mark:
ELEKTRA Temperature Controllers
Possible installation in the common frame:PRODUCER Busch-Jaeger Merten Eljo Ensto PRODUCT Reflex SI Atelier & M1 Trend
38
ELEKTRA Temperature ControllersThe Electronic 4-event Temperature Controller ELEKTRA OCD4 is designed for heating systems, especially for electric floor heating. Produced in accordance with EN 60730-1 and EN 60730-2-9. It consists of controller with built-in air sensor and a thin floor sensor. Possible configuration of 3 temperature measurement methods through: air sensor, floor sensor or air and limitation floor sensor. Compatible with most of floor sensors in the market. New advanced Dot Matrix multilanguage display.
Electronic programmable OCD4
This package contains:Type OCD4-1999 controller OCD4 with built-in air temperature sensor, a thin floor temperature sensor with 3 m tail (ETF-144/99T), programming instruction,
>
Technical data:230 V ~ 50/60 Hz 16A, 230 V ~ 50/60 Hz flush mounting 2-pole, 16A 4 programmable events for each day +5oC +40oC for each event +5oC +40oC for each event +5oC +40oC or OFF +5oC +40oC or OFF +5oC +40oC to the next event or to the cancellation 0.4K IP 21 display function 84 x 84 x 40 mm 100 x 64 pixel STN with backlight 25 x 37 mm GOST-R, VDE, BEAB, NEMKO CE
instruction manual.
Power supply: Max. load: Installation: Built-in switch: Clock functions: Comfort temperature range: Economical temperature range: Limitation floor sensor: Min.: Max.: Manual work mode: temperature range: work time: Difference/Hysteresis: Protection: Work signalization: Dimensions (H x W x D): Display: Display dimensions (H x W): Certificates: Product mark:
ETF-144/99T
Possible installation in the common frame:PRODUCER Busch-Jaeger Merten Eljo Ensto PRODUCT Reflex SI Atelier & M1 Trend
39
ELEKTRA Temperature Controllers
www.elektra.euElectronic programmable IRcontrol
ELEKTRA Temperature ControllersThe ELEKTRA IRcontrol electronic temperature controller has been designed for the control of heating systems, especially for the purposes of electric floor heating. It is produced in accordance with EN 60730-1 and EN 60730-2-9 standards. It consists of a controller with an air sensor and a built-in infrared (IR) sensor. This state-of-the-art solution effectively eliminates the necessity of connecting an external floor sensor, which
This package contains:Type IRcontrol 56613 controller with built-in air sensor and IR sensor, programming instruction and installation manual.
greatly facilitates the installation procedure. The controller is especially recommended for the operation with ELEKTRA WoodTec heating mats (for applications with laminate and engineered wood floorings). Possible configuration of 3 temperature measurement methods through: air sensor, floor sensor or air and limitation floor sensor.
>
Technical data:230 V ~ 50/60 Hz 16A, 230 V ~ 50/60 Hz flush mounting 4 programs +10oC +30oC +10oC +30oC +10oC +30oC until cancellation 0.4K IP 31 81.5 x 81.5 x 54.4 mm CE
Power supply: Max. load:
ELEKTRA Temperature Controllers
Installation: Clock functions: Comfort temperature range: Economical temperature range: Manual work mode: temperature range: work time: Difference/Hysteresis: Protection: Dimensions (H x W x D): Product mark:
Possible installation in the common frame:PRODUCER Busch-Jaeger Merten Eljo Ensto PRODUCT Reflex SI Atelier & M1 Trend
40
ELEKTRA Temperature ControllersThe Electronic Temperature Controller ELEKTRA DIGI2 is designed for heating systems, especially for electric floor heating. Produced in accordance with EN 60730-1 and EN 60730-2-9. It consists of controller and sensor appropriate for the application.
Electronic programmable DIGI2
This package contains:Type DIGI2 controller DIGI2 with built-in air temperature sensor, two batteries AA (R6), accessories to install, instruction manual. Type DIGI2p controller DIGI2, floor temperature sensor with 2.5 m tail, two batteries AA (R6), accessories to install, instruction manual.
>
Technical data:2 alkaline batteries AA (R6) 8A, 230 V ~ 50/60 Hz surface mounting 4 programs +5oC +30oC +5oC +30oC +5oC +30oC 1 99 days 0.3K IP 30 display function 82 x 120 x 30 mm 23 x 70 mm CE Floor sensor
Power supply: Max. load: Installation: Clock functions: Comfort temperature range: Economical temperature range: Manual work mode: temperature range: work time: Difference/Hysteresis: Protection: Work signalization: Dimensions (H x W x D): Display dimensions (H x D): Product mark:
41
ELEKTRA Temperature Controllers
www.elektra.euElectronic OTN
ELEKTRA Temperature ControllersThe Electronic Temperature Controller ELEKTRA OTN is designed for heating systems, especially for electric floor heating. Produced in accordance with EN 60730-1 and EN 60730-2-9. It consists of controller and floor sensor.
This package contains:Type OTN-1991 controller OTN, floor temperature sensor with 3 m tail (ETF-144/99), instruction manual.
>ETF-144/99
Technical data:230 V ~ 50/60 Hz 16A, 230 V ~ 50/60 Hz flush mounting 1-pole, 16A +5oC +40oC about 5oC supply signal 230 V ~ 50/60 Hz 0.4K IP 20 LED 80 x 80 x 50 mm GOST-R CE
Power supply: Max. load: Installation: Built-in switch: Temperature range: Setback temperature: Control of setback temperature: Difference/Hysteresis: Protection: Work signalization: Dimensions (H x W x D): Certificates: Product mark:
ELEKTRA Temperature Controllers
Possible installation in the common frame:PRODUCER Busch-Jaeger Merten Eljo Ensto PRODUCT Reflex SI Atelier & M1 Trend
42
ELEKTRA Temperature ControllersThe Electronic Ultra-Thin Temperature Controller ELEKTRA OTD2 is designed for heating systems, especially for electric floor heating. Produced in accordance with EN 60730-1 and EN 60730-2-9. It consists of controller with built-in air sensor and floor sensor. Possible configuration of 3 temperature measurement methods through: air sensor, floor sensor or air and limitation floor sensor.
Electronic OTD2
This package contains:Type OTD2-1999 controller OTD2 with built-in air sensor, floor temperature sensor with 3 m tail (ETF-144/99), instruction manual.
>
Technical data:230 V ~ 50/60 Hz 16A, 230 V ~ 50/60 Hz flush mounting 2-pole, 16A 0oC +40oC +5oC +30oC +15oC +55oC +2oC +8oC supply signal 230 V ~ 50/60 Hz 0.4K IP 21 LED 84 x 84 x 40 mm GOST-R CE ETF-144/99
Power supply: Max. load: Installation: Built-in switch: Temperature range: Limitation floor sensor: Min: Max: Setback temperature: Control of setback temperature: Difference/Hysteresis: Protection: Work signalization: Dimensions (H x W x D): Certificates: Product mark:
Possible installation in the common frame:PRODUCER Busch-Jaeger Merten Eljo Ensto PRODUCT Reflex SI Atelier & M1 Trend
43
ELEKTRA Temperature Controllers
www.elektra.euElectronic ELR
ELEKTRA Temperature ControllersThe Electronic Temperature Controller ELEKTRA ELR is designed for heating systems, especially for electric floor heating. Produced in accordance with EN 60730-1 and EN 60730-2-9. It consists of controller with built-in air sensor and floor sensor. Possible configuration of 3 temperature measurement methods through: air sensor, floor sensor or air and limitation floor sensors.
This package contains:Type ELR-10 controller ELR with built-in air temperature sensor, floor temperature sensor with 2.5 m tail, instruction manual.
Floor sensor
ELEKTRA Temperature Controllers
>
Technical data:230 V ~ 50/60 Hz 16A, 230 V ~ 50/60 Hz surface mounting 1-pole, 16A +5oC +35oC +40oC 0.5K IP 20 LED 80 x 82 x 36 mm B, GOST-R CE
Power supply: Max. load: Installation: Built-in switch: Temperature range: Limitation floor sensor: Difference/Hysteresis: Protection: Work signalization: Dimensions (H x W x D): Certificates: Product mark:
44
ELEKTRA Temperature ControllersThe Electronic Temperature Controller ELEKTRA ETOG2 is designed especially for snow and ice protection electric heating systems. Produced in accordance with EN 60730-1 and EN 60730-2-9. It consists of a controller and a ground humidity detector with an integrated air temperature sensor. ETOG2 controls up to 2 zones or a single zone by means of 2 sensors. It is a solution even for large applications, e.g. car parks or driveways. ETOG2 may also control 2 independent areas, e.g. a driveway and gutters (combination of ETOG-55, ETOR-55 and ETF-744 sensors).
Electronic DIN-rail ETOG2
This package contains:Type ETOG2 ETO2-4550 controller, humidity detector with an integral temperature sensor (ETOG-55), cover for surface mounting, instruction manual.
>
Technical data:
ETO2-4550 Power supply: Built-in transformer: Max. load: Installation: Temperature range: Difference/Hysteresis: Controller cover protection (surface mounting): Work signalization: Temperature sensor calibration: Working temperature: Dimensions (H x W x D): Modules: Certificates: Product mark: ETOG-55 Installation: Cover protection: Dimensions (H x D): Measurement: in the ground IP 68 32 60 mm humidity and ground temperature IP 21 LED potentiometer 0oC +50oC 90 x 156 x 45 mm 9 GOST-R CE 120/240 V ~ 50/60 Hz 24VAC, 6VA 3 x 16A, 230 V ~ 50/60 Hz (potential free relays) DIN-rail or surface mounting 0oC +5oC 0.3K Surface mounting box ETOG-55
45
ELEKTRA Temperature Controllers
www.elektra.euElectronic DIN-rail ETOR2
ELEKTRA Temperature ControllersThe Electronic Temperature Controller ELEKTRA ETOR2 is designed for snow and ice protection electric heating systems. Produced in accordance with EN 60730-1 and EN 60730-2-9. It consists of a controller, gutter humidity and air temperature sensors. ETOR2 controls up to 2 zones or a single zone by means of 2 sensors. It is a solution even for large applications, e.g. roof runners and roofs.
This package contains:Type ETOR2 ETO2-4550 controller, humidity detector (ETOR-55), air temperature sensor in the hermetic cover (ETF-744/99), cover for surface mounting, accessories for installation, instruction manual.
ETOR2 may also control 2 independent areas, e.g. a driveway and gutters (combination of ETOG-55, ETOR-55 and ETF-744 sensors).
>
Technical data:
ETO2-4550 Power supply: Built-in transformer: Max. load: Installation: Temperature range: Difference/Hysteresis: Controller cover protection 120/240 V ~ 50/60 Hz 24 VAC, 6 VA 3 x 16A, 230 V ~ 50/60 Hz (potential free relays) DIN-rail or surface mounting 0oC +5oC 0.3K IP 21 LED potentiometer 0oC +50oC 90 x 156 x 45 mm 9 GOST-R CE
ELEKTRA Temperature Controllers
ETF-744/99
ETOR-55
(surface mounting): Work signalization: Temperature sensor calibration: Working temperature: Dimensions (H x W x D): Modules: Certificates: Product mark: ETF-744/99
Surface mounting box
Installation: Protection: Dimensions (H x W x D): Working temperature: Measurement: ETOR-55 Installation: Protection: Dimensions (H x W x D): Measurement:
surface mounting, outdoor IP 54 64 x 50 x 34 mm -50oC +70oC air temperature
inside the gutter IP 68 105 x 30 x 13 mm humidity
46
ELEKTRA Temperature ControllersThe Electronic Temperature Controller ELEKTRA ETR2G is designed specifically for snow and ice protection electric heating systems. Produced in accordance with EN 60730-1 and EN 60730-2-9. It consists of controller and a ground humidity detector with an integrated air temperature sensor.
Electronic DIN-rail ETR2G
This package contains:Type ETR2G ETR2-1550 controller, humidity detector with an integral temperature sensor (ETOG-55), instruction manual.
>
Technical data:
ETR2-1550
Power supply: Max. load: Installation: Temperature range: Difference/Hysteresis: Temperature controller protection: Work signalization:
230 V ~ 50/60 Hz 16A, 230 V ~ 50/60 Hz
DIN-rail0oC +10oC 0.3K IP 20 LED RELAY LED TEMP LED MOIST (red) (red) (red) : output on : outdoor temperature below setpoint : moisture detected LED ON (green) : power on ETOG-55
Timer: Working temperature: Dimensions (H x W x D): Modules: Certificates: Product mark: ETOG-55 Installation: Cover protection: Dimensions (H x D): Measurement:
Switch-off delay adjustable 0-6 hours -20oC +50oC 86 x 52 x 59 mm 3 GOST-R CE
in the ground IP 68 32 60 mm humidity and ground temperature
47
ELEKTRA Temperature Controllers
www.elektra.euElectronic DIN-rail ETR2R
ELEKTRA Temperature ControllersThe Electronic Temperature Controller ELEKTRA ETR2R is designed specifically for snow and ice protection electric heating systems. Produced in accordance with EN 60730-1 and EN 60730-2-9. It consists of controller, gutter humidity and air temperature sensors.
This package contains:Type ETR2R ETR2-1550 controller, humidity detector (ETOR-55), air temperature sensor in the hermetic cover (ETF-744/99), instruction manual.
>
Technical data:
ETR2-1550
Power supply: Max. load: Installation: Temperature range: Difference/Hysteresis: Temperature controller protection: Work signalization:ETF-744/99 ETOR-55
230 V ~ 50/60 Hz 16A, 230 V ~ 50/60 Hz
DIN-rail0oC +10oC 0.3K IP 20 LED ON LED RELAY LED TEMP (green): power on (red) (red) : output on : outdoor temperature below setpoint LED MOIST (red) : moisture detected
ELEKTRA Temperature Controllers
Timer:
Switch-off delay adjustable 0-6 hours -20oC +50oC 86 x 52 x 59 mm 3 GOST-R CE
Working temperature: Dimensions (H x W x D): Modules: Certificates: Product mark:ETF-744/99 Installation: Protection: Dimensions (H x W x D): Working temperature: Measurement: ETOR-55 Installation: Protection: Dimensions (H x W x D): Measurement:
surface mounting, outdoor IP 54 64 x 50 x 34 mm -50oC +70oC air temperature
inside the gutter IP 68 105 x 30 x 13 mm humidity
48
ELEKTRA Temperature ControllersThe ELEKTRA UTR 60-PRO Electronic Temperature Controller is designed for pipe heating systems, including anti-frost protection and maintaining the desired pipeline temperature. Produced in accordance with the EN 60730-1 and EN 60730-2-9 standards. It consists of the controller and a temperature sensor to be mounted on a pipe surface.
Electronic UTR 60-PRO
This package contains:UTR 60-PRO UTR 60-PRO controller, temperature sensor with 1.5 m cable (F 892 002), instruction manual.
F 892 002
>
Technical data:230 V ~ 50/60 Hz 16A, 230 V ~ 50/60 Hz surface mounting / installation board 0oC +60oC about 5oC 1 10 K IP 65 LED -20oC +50oC 120 x 122 x 56 mm GOST-R CE
UTR 60-PRO Power supply: Max. load: Installation: Temperature range: Setback temperature: Hysteresis: Controller protection: Signalization: Operation temperature: Dimensions (H x W x D): Certificates: Product mark: F 892 002 Installation: Sensor protection: Working temperature: on pipe IP 67 -40oC +120oC
49
ELEKTRA Temperature Controllers
www.elektra.euElectronic DIN-rail ETV
ELEKTRA Temperature ControllersThe Electronic Temperature Controller ELEKTRA ETV is designed for heating systems, especially for floor and pipe electric heating. Produced in accordance with EN 60730-1 and EN 60730-2-9. It consists of the controller and an appropriate sensor dependent on the application.
This package contains:Type ETV-1991 ETV-1990 controller, temperature sensor with 3 m tail (ETF-144/99), instruction manual. Type ETV-1999 ETV-1990 controller, indoor air temperature sensor (ETF-944/99) or (optional) air temperature sensor in the hermetic cover (ETF-744/99), instruction manual. ETV-1990 Power supply: Max. load: Installation: Temperature range: Setback temperature: Control of setback temperature: Difference/Hysteresis: Temperature controller protection: Signalization: Working temperature: 230 V ~ 50/60 Hz 16A, 230 V ~ 50/60 Hz DIN-rail 0oC +40oC about 5oC supply signal 230 V ~ 50/60 Hz 0.4K IP 20 LED 0oC +50oC 86 x 36 x 58 mm 2 GOST-R CE
>
Technical data:
ELEKTRA Temperature Controllers
Dimensions (H x W x D): Modules: Certificates: Product mark: ETF-744/99 Installation: Protection: Dimensions (H x W x D): Working temperature: ETF-144/99 Installation: ETF-944/99 Protection: Working temperature: ETF-944/99 Installation: Protection: Dimensions (H x W x D): Working temperature:
ETF-744/99
ETF-144/99
surface mounting, outdoor IP 54 64 x 50 x 34 mm -50oC +70oC
floor or on pipe IP 67 -20oC +70oC
surface mounting, indoor IP 20 80 x 80 x 16 mm -20oC +70oC
50
ELEKTRA Temperature ControllersThe Electronic Temperature Controller ELEKTRA ETN is designed for heating systems, especially electric floor heating and basement protection (coolers). Produced in accordance with EN 60730-1 and EN 60730-2-9. It consists of the controller and an appropriate sensor dependent on the application.
Electronic DIN-rail ETN
This package contains:Type ETN-1441 ETN-2P-1441 controller, floor temperature sensor with 3 m tail (ETF-144/99), instruction manual. Type ETN-1449 ETN-2P-1441 Power supply: Max. load: Installation: Built-in switch: Temperature range: Setback temperature range: Difference/Hysteresis: Controller protection: Signalization: Working temperature: Dimensions (H x W x D): Modules: Certificates: Product mark: ETF-744/99 Installation: Protection: Dimensions (H x W x D): Working temperature: ETF-144/99 Installation: Protection: Working temperature: ETF-944/99 Installation: Protection: Dimensions (H x W x D): Working temperature: surface mounting, indoor IP 20 80 x 80 x 16 mm -20oC +70oC floor or on pipe IP 67 -20oC +70oC ETF-944/99 surface mounting, outdoor IP 54 64 x 50 x 34 mm -50oC +70oC ETF-744/99 ETF-144/99 230 V ~ 50/60 Hz 16A, 230 V ~ 50/60 Hz DIN-rail 2-pole, 16A 0oC +35oC +3oC +10oC 0.3 6K IP 20 LED -20oC +50oC 3 GOST-R CE 86 x 52.5 x 58 mm ETN-2P-1441 controller, indoor air temperature sensor (ETF-944/99) or (optional) air temperature sensor in the hermetic cover (ETF-744/99), instruction manual.
>
Technical data:
51
ELEKTRA Temperature Controllers
www.elektra.euElectronic DIN-rail ETI
ELEKTRA Temperature ControllersThe Electronic Temperature Controller ELEKTRA ETI is designed for heating and cooling systems, especially basement protection (coolers) and pipelines. Produced in accordance with EN 60730-1 and EN 60730-2-9. It consists of the controller and an appropriate sensor dependent on the application.
This package contains:Type ETI-1522 ETI-1551 controller, temperature sensor with special installation opening (ETF-622), instruction manual. Type ETI-1544 ETI-1551 controller, temperature sensor with 3m tail (ETF-144/99), instruction manual.
>
Technical data:
ETI-1551 Power supply: Max. load: Installation: Built-in switch: Temperature range: Difference/Hysteresis: Controller protection: 230 V ~ 50/60 Hz 10A, 230 V ~ 50/60 Hz DIN-rail 2-pole, 16A 0oC +50oC 0.3 6K IP 20 LED -20oC +50oC 86 x 36 x 58 mm 3 GOST-R CE
ELEKTRA Temperature Controllers
Signalization: Working temperature: Dimensions (H x W x D): Modules: Certificates: ETF-622 ETF-144/99 Product mark: ETF-622 Installation: Protection: Working temperature: ETF-144/99 Installation: Protection: Working temperature:
on pipe IP 44 -40oC +120oC
floor or on pipe IP 67 -20oC +70oC
52
ELEKTRA ul. Marynarska 14, 02-674 Warszawa, Poland phone (+48 22) 843 32 82, fax (+48 22) 843 47 52 e-mail: [email protected] www.elektra.eu
Edition 11/2011
Grupa V5 ESG (EN) 300 11/11 0 A4 (2) p