eleq transformers for generator applications · 2019. 2. 25. · iec 61869-2 / ieee c57.13 100 x...
TRANSCRIPT
-
ELEQ Transformers for Generator Applications
Current and voltage transformers for use in generator terminal boxes with high vibration levels
-
Low voltage transformers
Current transformers
GSQR410 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4
GSAG200 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 5
IGSG 178 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 6
Medium voltage transformers
Current transformers
IGWR C1 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 7
IGWR D1 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 8
IGWR D25� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 9
Voltage transformers
Single pole
UGER C1 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 10
UGER D1 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 11
UGER D2 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 12
UGER D25 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 13
Double pole
UGZR C1 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 14
UGZR D25 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 15
Table of contents
-
ELEQ has designed a special line of low and medium voltage transformers for generator applications� The special ELEQ construction combines easy mounting with a high resistance for the vibrations in the generator application�
The line of current and voltage transformers for generator applications contain low voltage transformers and medium voltage transformers up to 17,5 kV�
• High resistance for generator vibrations• Easy mounting constructions• Up to 17,5 kV• For measurement and protection measurement
Transformers for Generator Applications
3
-
Technical specifications
GSQR410 – Generator Current Transformer
Ordering specifications*
Wiring diagram IEC 61869-2
The GSQR is used for protection and measurement, e.g. power generators. When properly installed, the low voltage GSQR canbe used also for higher voltage levels as the rated 0,72kV. The special ELEQ generator construction, makes it possible to use theGSQR in applications with shock and/or vibration requirements.
Dimensions*
Environmental conditions
This product is designed to be safeunder the following conditions: Location:Ambient air temperature:Optional low temperature:Optional high temperature:Relative humidity:Altitude:
Protection degree (secondary terminal):
Indoor use-25°C .. +70°C-40°C+80°C5% .. 95%, non condensingMax. 1000m above NN; at >1000m data requiredIP00
Application conditions
Standard:IEC 61768-2 specificationRated short-time thermal current (lth):Continuous thermal current (lcth):Rated insulation level:Rated frequency:Class of insulation:Rated primary current:Rated secondary current:
Rated output:
Accuracy class:
Primary window dimensions:Secondary terminal:
IEC 61869-2 / IEEE C57.13
100 x In/1s, max. 100kA/1s120%0,72/3/-kV50/60HzE30-15.000A1A or 5A; other options available on requestAs required. For example 2,5, 10, 30VAAs required. For example 0,2S, 5P10Ø 250 mmScrew terminals M5 (max. 2,5Nm)
Size X Y Secondary current**
ABCDEF
6090120150200250
6696126156206256
1 or 5A1 or 5A1 or 5A1 or 5A1 or 5A1 or 5A
* Other dimensions available on request.** Other secondary current on request.Design according to IEC61869-2 , IEEE C 57.13. Other standards are possible on request.
* Terminal designations according to IEEE is shown. Optional the terminal designation according to IEC (P1 / S1 – S2)
Article number
On requestOn requestOn requestOn requestOn requestOn request
+2 -5
4
info@eleq�com +31 (0) 521 533 333 www�eleq�com
-
Technical specifications
GSAG200 – Bushing-type Current Transformer
Wiring diagram IEC 61869-2
The GSAG200 is used for measurement and protection in applications with vibration requirements like power generators. Thecast resin insulated indoor bushing-type current transformer can be up to 1,2kV. The special ELEQ generator construction,makes it possible to use the GSAG200 with shock and / or vibration requirements. The current transformer is maintenance-freeand mountable in any position.
Dimensions
Environmental conditions
This product is designed to be safeunder the following conditions: Location:Ambient air temperature:
Storage and transport temperature:Relative humidity:Altitude:
Protection degree:
Indoor use-25°C .. +70°C; other temperatures on request-50°C .. +80°C5% .. 95%, non condensingMax. 1000m above NN; at >1000m data requiredIP20
Application conditions
Standard:IEC 61768-2 specificationRated short-time thermal current (lth):
Rated dynamic current (Idyn):Continuous thermal current (lcth):Rated insulation level:Rated frequency:Class of insulation:Rated primary current:Rated secondary current:
Rated output:
Accuracy class:
Secondary terminal:
IEC 61869-2 / IEEE C57.13, etc.
100 x In/1s, max. 100kA/1s, other duration on request2,5 x IthUp to 200%1,2/6/-kV50/60HzE10-5000A1A or 5A; other options available on requestAs required. For example 10, 15VAAs required. For example 0,2, 5P20Screw terminals M5 (max. 2,5Nm)
Ordering SpecificationsFor the customized design of your ELEQ GSAG200 CurrentTransformer the following information is required:
Mandatory• Rated primary current• Rated secondary current• Rated output• Accuracy class• Frequency
Optional• Multi-core transformers• Other relevant requirements
5
info@eleq�com +31 (0) 521 533 333 www�eleq�com
-
Technical specifications
IGSG 178 –Bushing-type Current Transformer
Wiring diagram IEC 61869-2
The IGSG 178 is used for measurement and protection in applications with vibration requirements like power generators. Thecast resin insulated indoor current transformer can be used for 0,72 kV or in a medium voltage area in conjunction with aninsulated connector. The special ELEQ generator construction, makes it possible to use the IGSG 178 with shock and/orvibration requirements. The current transformer is maintenance-free and mountable in any position.
Dimensions*
Environmental conditions
This product is designed to be safeunder the following conditions: Location:Ambient air temperature:
Storage and transport temperature:Relative humidity:Altitude:
Protection degree:
Indoor use-25°C .. +70°C; other temperatures on request-50°C .. +80°C5% .. 95%, non condensingMax. 1000m above NN; at >1000m data requiredIP55
Application conditions
Standard:IEC 61768-2 specificationRated short-time thermal current (lth):
Rated dynamic current (Idyn):Continuous thermal current (lcth):Rated insulation level:Rated frequency:Class of insulation:Rated primary current:Rated secondary current:
Rated output:Accuracy class:
Secondary terminal:
Secondary terminal cross-section and length:
IEC 61869-2 / IEEE C57.13, etc.
100 x In/1s, max. 100kA/1s, other duration on request2,5 x IthUp to 200%0,72/3/-kV50/60HzE10-1500A1A or 5A; other options available on requestAs required. For example 15VAAs required. For example 0,2; 0,5; 5P20PG11 or PG21 cable gland depends size B or F
4 mm²; 3 m ± 10%
Ordering SpecificationsFor the customized design of your ELEQ IGSG 178 CurrentTransformer the following information is required:
Mandatory• Rated primary current• Rated secondary current• Rated output• Accuracy class• Frequency
Optional• Multi-core transformers• Other relevant requirements
* Also available for ø 60
Baugröße/ size X y z
B 90 125 160 F 250 285 320
cable gland number of wire PG11 2-4 PG21 6
Baugröße/ size X y z
B 90 125 160 F 250 285 320
cable gland number of wire PG11 2-4 PG21 6
6
info@eleq�com +31 (0) 521 533 333 www�eleq�com
-
Technical specifications
IGWR C1 – Generator Current Transformer
Wiring diagram IEC 61869-2
The IGWR C1 is used for measurement and protection in application with vibration requirements like power generators. The castresin insulated indoor supporting-type current transformer can be used up to 17,5kV. The special ELEQ generator construction,makes it possible to use the IGWR C1 in applications with shock and/or vibration requirements.
Dimensions
Environmental conditions
This product is designed to be safeunder the following conditions: Location:Ambient air temperature:Optional low temperature:Optional high temperature:Relative humidity:Altitude:
Protection degree (secondary terminal):
Indoor use-25°C .. +70°C-40°C+80°C5% .. 95%, non condensingMax. 1000m above NN; at >1000m data required
IP20
Application conditions
Standard:IEC 61768-2 specificationRated short-time thermal current (lth):Rated dynamic current:Continuous thermal current (lcth):Rated insulation level:Rated frequency:Class of insulation:Rated primary current:Rated secondary current:
Rated output:
Accuracy class:
Primary connection:Secondary terminal:
IEC 61869-2 / IEEE C57.13
100 x In/1s, max. 50kA/1s2,5 x Icth120%17,5/38/95kV50/60HzE5-1500A1A or 5A; other options available on requestAs required. For example 2,5, 10, 30VAAs required. For example 0,2S, 5P10M12 (40Nm)Screw terminals M5 (max. 2,5Nm)
Ordering SpecificationsFor the customized design of your ELEQ IGWR C1 GeneratorCurrent Transformer the following information is required:
Mandatory• Rated primary current• Rated secondary current• Rated output• Accuracy class• Frequency
Optional• Other relevant requirements
7
info@eleq�com +31 (0) 521 533 333 www�eleq�com
-
Technical specifications
IGWR D1 – Generator Current Transformer
Wiring diagram IEC 61869-2
The IGWR D1 is used for measurement and protection in applications with vibration requirements like power generators. Thecast resin insulated indoor supporting-type current transformer can be used up to 17,5 kV. The special ELEQ generatorconstruction, makes it possible to use the IGWR D1 with shock and / or vibration requirements. The current transformer ismaintenance-free and mountable in any position.
Dimensions
Environmental conditions
This product is designed to be safeunder the following conditions: Location:Ambient air temperature:
Storage and transport temperature:Relative humidity:Altitude:
Protection degree (secondary terminal):
Indoor use-25°C .. +70°C; other temperatures on request-50°C .. +80°C5% .. 95%, non condensingMax. 1000m above NN; at >1000m data required
IP20
Application conditions
Standard:IEC 61768-2 specificationRated short-time thermal current (lth):
Rated dynamic current (Idyn):Continuous thermal current (lcth):Rated insulation level:Rated frequency:Class of insulation:Rated primary current:Rated secondary current:
Rated output:
Accuracy class:
Primary connection:Secondary terminal:
IEC 61869-2 / IEEE C57.13, etc.
100 x In/1s, max. 50kA/1s, other duration on request2,5 x Ith, max. 125kAUp to 200%17,5/38/95kV50/60HzE5-1500A1A or 5A; other options available on requestAs required. For example 2,5, 10, 30VAAs required. For example 0,2S, 5P10M12 (40Nm)Screw terminals M5 (max. 2,5Nm)
Ordering SpecificationsFor the customized design of your ELEQ IGWR D1 CurrentTransformer the following information is required:
Mandatory• Rated primary current• Rated secondary current• Rated output• Accuracy class• Frequency
Optional• Multi-core transformers• Other relevant requirements
125
- 10+
13
270 - 1,50,0+
5022
0-2
300 - 20+
170 - 10+
40 25335 - 2
0+
38 - 10+
M12x23
220 - 20+
160 - 20+
148 - 20+
8
info@eleq�com +31 (0) 521 533 333 www�eleq�com
-
Technical specifications
IGWR D25 – Generator Current Transformer
Wiring diagram IEC 61869-2
The IGWR D25 is used for measurement and protection in applications with vibration requirements like power generators. Thecast resin insulated indoor supporting-type current transformer can be used up to 17,5 kV. The special ELEQ generatorconstruction, makes it possible to use the IGWR D25 with shock and / or vibration requirements. The current transformer ismaintenance-free and mountable in any position.
Dimensions
Environmental conditions
This product is designed to be safeunder the following conditions: Location:Ambient air temperature:
Storage and transport temperature:Relative humidity:Altitude:
Protection degree (secondary terminal):
Indoor use-25°C .. +70°C; other temperatures on request-50°C .. +80°C5% .. 95%, non condensingMax. 1000m above NN; at >1000m data required
IP20
Application conditions
Standard:IEC 61768-2 specificationRated short-time thermal current (lth):
Rated dynamic current (Idyn):Continuous thermal current (lcth):Rated insulation level:Rated frequency:Class of insulation:Rated primary current:Rated secondary current:
Rated output:
Accuracy class:
Primary connection:Secondary terminal:
IEC 61869-2 / IEEE C57.13, etc.
100 x In/1s, max. 50kA/1s, other duration on request2,5 x Ith, max. 125kAUp to 200%17,5/38/95kV50/60HzE5-1500A1A or 5A; other options available on requestAs required. For example 2,5, 10, 30VAAs required. For example 0,2S, 5P10M12 (40Nm)Screw terminals M5 (max. 2,5Nm)
Ordering SpecificationsFor the customized design of your ELEQ IGWR D25 CurrentTransformer the following information is required:
Mandatory• Rated primary current• Rated secondary current• Rated output• Accuracy class• Frequency
Optional• Multi-core transformers• Other relevant requirements
9
info@eleq�com +31 (0) 521 533 333 www�eleq�com
-
UGER C1 – Generator Voltage TransformerThe UGER C1 is used for measurement and protection in applications with vibration requirements like power generators. The singlepole indoor voltage transformer can be used up to 17,5kV. The special ELEQ generator construction, makes it possible to use theUGER C1 in applications with shock and / or vibration requirements. The voltage transformer is maintenance-free and mountable inany position.
Technical Specifications
Ordering Specifications
Environmental conditions
This product is designed to be safeunder the following conditions: Location:Ambient air temperature:
Storage and transport temperature:Relative humidity:Altitude:
Protection degree (secondary terminal):
Indoor use-25°C .. +70°C; other temperatures on request-50°C .. +80°C5% .. 95%, non condensingMax. 1000m above NN; at >1000m data requiredIP20
Application conditions
Standard:
IEC 61768-3 specification:Rated thermal limiting output (Sth):
Rated voltage factor:
Rated insulation level:Rated frequency:Class of insulation:Rated primary voltage:Rated secondary voltage:
Rated output:
Accuracy class:
Primary connection:Secondary terminal:
IEC 61869-3 / IEEE C57.13; etc.
500VA measuring winding100VA residual winding1,9 x Un for 8h; 1,2 x Un continuous17,5/38/95kV50/60HzE2/√3kV - 15/√3kV100/√3V or 110/√3V; other options available on requestAs required. For example 10, 15, 30VAAs required. For example 0,2, 3PM10 (20Nm)Screw terminals M5 (max. 2,5Nm)
Dimensions
Wiring Diagram IEC 61869-3
For the customized design of your ELEQ UGER C1 GeneratorVoltage Transformer the following information is required:
Mandatory• Rated primary voltage• Rated secondary voltage• Rated output• Accuracy class• Frequency
Optional• Transformer requirement with separated windings• Other relevant requirements
10
info@eleq�com +31 (0) 521 533 333 www�eleq�com
-
UGER D1 – Generator Voltage TransformerThe UGER D1 is used for measurement and protection in applications with vibration requirements like power generators. The singlepole indoor voltage transformer can be used up to 12 kV. The special ELEQ generator construction, makes it possible to use theUGER D1 in applications with shock and / or vibration requirements. The voltage transformer is maintenance-free and mountable inany position.
Technical Specifications
Ordering Specifications
Environmental conditions
This product is designed to be safeunder the following conditions: Location:Ambient air temperature:
Storage and transport temperature:Relative humidity:Altitude:
Protection degree (secondary terminal):
Indoor use-25°C .. +70°C; other temperatures on request-50°C .. +80°C5% .. 95%, non condensingMax. 1000m above NN; at >1000m data requiredIP20
Application conditions
Standard:
IEC 61768-3 specification:Rated thermal limiting output (Sth):
Rated voltage factor:
Rated insulation level:Rated frequency:Class of insulation:Rated primary voltage:Rated secondary voltage:
Rated output:
Accuracy class:
Primary connection:Secondary terminal:
IEC 61869-3 / IEEE C57.13; etc.
500VA measuring winding100VA residual winding1,9 x Un for 8h; 1,2 x Un continuous12/28/75kV50/60HzE2/√3kV - 11/√3kV100/√3V or 110/√3V; other options available on requestAs required. For example 10, 15, 30VAAs required. For example 0,2, 3PM10 (20Nm)Screw terminals M5 (max. 2,5Nm)
Dimensions
Wiring Diagram IEC 61869-3
For the customized design of your ELEQ UGER D1 GeneratorVoltage Transformer the following information is required:
Mandatory• Rated primary voltage• Rated secondary voltage• Rated output• Accuracy class• Frequency
Optional• Transformer requirement with separated windings• Other relevant requirements
11
info@eleq�com +31 (0) 521 533 333 www�eleq�com
-
UGER D2 – Generator Voltage TransformerThe UGER D2 – optional with fuse – is used for measurement and protection in applications with vibration requirements like powergenerators. The single pole indoor voltage transformer can be used up to 17,5kV. The special ELEQ generator construction, makesit possible to use the UGER D2 in applications with shock and/or vibration requirements.
Technical Specifications
Ordering Specifications
Environmental conditions
This product is designed to be safeunder the following conditions: Location:Ambient air temperature:Optional low temperature:Optional high temperature:Relative humidity:Altitude:
Protection degree (secondary terminal):
Indoor use-25°C .. +70°C-40°C +80°C5% .. 95%, non condensingMax. 1000m above NN; at >1000m data requiredIP20
Application conditions
Standard:IEC 61768-3 specification:Rated thermal limiting output (Sth):
Rated voltage factor:
Rated insulation level:Rated frequency:Class of insulation:Rated primary voltage:Rated secondary voltage:
Rated output:
Accuracy class:
Primary connection:Secondary terminal:
IEC 61869-2 / IEEE C57.13
500VA measuring winding100VA residual winding1,9 x Un for 8h; 1,2 x Un continuous17,5/38/95kV50/60HzE15/√3kV100/√3V or 110/√3V; other options available on requestAs required. For example 10, 15, 30VAAs required. For example 0,2, 3PM10 (20Nm)Screw terminals M5 (max. 2,5Nm)
Optional fuse: HSW 6/12 (EFEN)HSW 15/24 (EFEN)
Dimensions
Wiring Diagram IEC 61869-3
For the customized design of your ELEQ UGER D2 GeneratorVoltage Transformer the following information is required:
Mandatory• Rated primary voltage• Rated secondary voltage• Rated output• Accuracy class• Frequency
Optional• Other relevant requirements
12
info@eleq�com +31 (0) 521 533 333 www�eleq�com
-
UGER D25 – Generator Voltage TransformerThe UGER D25 is used for measurement and protection in applications with vibration requirements like power generators. Thesingle pole indoor voltage transformer can be used up to 17,5kV. The special ELEQ generator construction, makes it possible to usethe UGER D25 in applications with shock and / or vibration requirements. The voltage transformer is maintenance-free andmountable in any position.
Technical Specifications
Ordering Specifications
Environmental conditions
This product is designed to be safeunder the following conditions: Location:Ambient air temperature:
Storage and transport temperature:Relative humidity:Altitude:
Protection degree (secondary terminal):
Indoor use-25°C .. +70°C; other temperatures on request-50°C .. +80°C5% .. 95%, non condensingMax. 1000m above NN; at >1000m data requiredIP20
Application conditions
Standard:
IEC 61768-3 specification:Rated thermal limiting output (Sth):
Rated voltage factor:
Rated insulation level:Rated frequency:Class of insulation:Rated primary voltage:Rated secondary voltage:
Rated output:
Accuracy class:
Primary connection:Secondary terminal:
IEC 61869-3 / IEEE C57.13; etc.
500VA measuring winding100VA residual winding1,9 x Un for 8h; 1,2 x Un continuous17,5/38/75kV50/60HzE2/√3kV - 15/√3kV100/√3V or 110/√3V; other options available on requestAs required. For example 10, 15, 30VAAs required. For example 0,2, 3PM10 (20Nm)Screw terminals M5 (max. 2,5Nm)
Dimensions
Wiring Diagram IEC 61869-3
For the customized design of your ELEQ UGER D25 GeneratorVoltage Transformer the following information is required:
Mandatory• Rated primary voltage• Rated secondary voltage• Rated output• Accuracy class• Frequency
Optional• Transformer requirement with separated windings• Other relevant requirements
13
info@eleq�com +31 (0) 521 533 333 www�eleq�com
-
UGZR C1 – Generator Voltage TransformerThe UGZR C1 is used for measurement and protection in applications with vibration requirements like power generators. Thedouble pole indoor voltage transformer can be used up to 17,5kV. The special ELEQ generator construction, makes it possible touse the UGZR C1 in applications with shock and / or vibration requirements. The voltage transformer is maintenance-free andmountable in any position.
Technical Specifications
Ordering Specifications
Environmental conditions
This product is designed to be safeunder the following conditions: Location:Ambient air temperature:
Storage and transport temperature:Relative humidity:Altitude:
Protection degree (secondary terminal):
Indoor use-25°C .. +70°C; other temperatures on request-50°C .. +80°C5% .. 95%, non condensingMax. 1000m above NN; at >1000m data requiredIP20
Application conditions
Standard:
IEC 61768-3 specification:Rated thermal limiting output (Sth):
Rated voltage factor:
Rated insulation level:Rated frequency:Class of insulation:Rated primary voltage:Rated secondary voltage:
Rated output:
Accuracy class:
Primary connection:Secondary terminal:
IEC 61869-3 / IEEE C57.13; etc.
500VA measuring winding100VA residual winding1,9 x Un for 8h; 1,2 x Un continuous17,5/38/75kV50/60HzE2/√3kV - 15/√3kV100/√3V or 110/√3V; other options available on requestAs required. For example 10, 15, 30VAAs required. For example 0,2M10 (20Nm)Screw terminals M5 (max. 2,5Nm)
Dimensions
Wiring Diagram IEC 61869-3
For the customized design of your ELEQ UGZR C1 VoltageTransformer the following information is required:
Mandatory• Rated primary voltage• Rated secondary voltage• Rated output• Accuracy class• Frequency
Optional• Transformer requirement with separated windings• Other relevant requirements
14
info@eleq�com +31 (0) 521 533 333 www�eleq�com
-
UGZR D25 – Generator Voltage TransformerThe UGZR D25 is used for measurement and protection in applications with vibration requirements like power generators. Thedouble pole indoor voltage transformer can be used up to 17,5kV. The special ELEQ generator construction, makes it possible touse the UGZR D25 in applications with shock and / or vibration requirements. The voltage transformer is maintenance-free andmountable in any position.
Technical Specifications
Ordering Specifications
Environmental conditions
This product is designed to be safeunder the following conditions: Location:Ambient air temperature:
Storage and transport temperature:Relative humidity:Altitude:
Protection degree (secondary terminal):
Indoor use-25°C .. +70°C; other temperatures on request-50°C .. +80°C5% .. 95%, non condensingMax. 1000m above NN; at >1000m data requiredIP20
Application conditions
Standard:
IEC 61768-3 specification:Rated thermal limiting output (Sth):
Rated voltage factor:
Rated insulation level:Rated frequency:Class of insulation:Rated primary voltage:Rated secondary voltage:
Rated output:
Accuracy class:
Primary connection:Secondary terminal:
IEC 61869-3 / IEEE C57.13; etc.
500VA measuring winding100VA residual winding1,9 x Un for 8h; 1,2 x Un continuous17,5/38/95kV50/60HzE2/√3kV - 15/√3kV100/√3V or 110/√3V; other options available on requestAs required. For example 10, 15, 30VAAs required. For example 0,2, 3PM10 (20Nm)Screw terminals M5 (max. 2,5Nm)
Dimensions
Wiring Diagram IEC 61869-3
For the customized design of your ELEQ UGZR D25 VoltageTransformer the following information is required:
Mandatory• Rated primary voltage• Rated secondary voltage• Rated output• Accuracy class• Frequency
Optional• Transformer requirement with separated windings• Other relevant requirements
15
info@eleq�com +31 (0) 521 533 333 www�eleq�com
-
83322 / TfGA-EN1704
ELEQ b.v.P�O� Box 12, 8330 AA SteenwijkTukseweg 130, 8331 LH Steenwijk The Netherlands
+31 (0) 521 533 333 info@eleq�com www�eleq�com
Karl-Ferdinand-Braun-Straße 150170 Kerpen (Sindorf)Germany
+49 (0) 22 73 / 988 70 info@eleq�com www�eleq�com
ELEQ designs and manufactures smart electrotechnical applications
for protecting, measuring and connecting electrical energy and works
worldwide for renowned power companies, system builders and
installers. Together with our clients we anticipate on the future and on
required innovations.
ELEQ is a true producer and partner of clients and relations who are
professionally involved in energy and public lighting systems and who
rely on continuous precision and high services.
ELEQ delivers all its products and applications in accordance to the high
Dutch and German quality standards and serves markets in Europe and
beyond from its locations in the Netherlands (Steenwijk) and Germany
(Kerpen).