ell-200-a ell, end of line lamp - britech - electric ... data sheet.pdf · ell, end of line lamp...
TRANSCRIPT
heating cables & controls
End of Line Lamp ACCESSORIES
17 Pullman Court, Toronto, ON M1X 1E4 • Tel: 877-335-7790/416-335-7790 • Fax: 877-335-3166/416-335-8071 • [email protected] • www.britech.ca© 2017, Britech Corp. Disclaimer of liability: Any information given here is understood as a guideline without any legal obligation. Technical data subject to alteration without notice. 08/2017
For use with Britech’s line-up of FT and PT seriesself-regulating heating cables.
The lighted end seal combines the BARTEC ComEXseries light with FT and PT series self-regulating cables.
The end seal properly terminates the heating circuits,while providing visual information on the heating circuitstatus to the operator.
ELL-200-AELL, End of Line Lamp
Techincal:
Ingress Protection• IP65, NEMA Type 4x
Ambient Temperature Range• -55 °C up to +40 °C (-67 °F up to +104 °F)
Dimensions (H-W-D) on mounting stand• 4.7 x 4.8 x 3.5 in (120 x 122 x 90 mm)
Features:
• Indication on heating circuit status
• Can be combined with cold-applied or heat shrink technology
• Mounting stand included
Additional Specifications:
• Quick and easy installation
• NEMA Type 4X / IP65 protection levelLens Colour• Red
Material• Polyester, glass fibre reinforce
• For use with Britech’s FT and PT series self-regulating cables
Heater Cable Entry• 1 x D5 grommet
Box Support• Mounting stand (PPS)
Voltage Range• AC 110 V to 256 V
Max. Pipe Temperature• +180 °C (+365 °F)
Max. Ambient Temperature• +40 °C (+104 °F)
Terminals• 2.5 mm2 , fine strandedMax. Conductor Size• 14 AwgMax. Voltage• 256 V
• Explosion protection and CSA certified
Explosion Proctection:
TypeClass I, Div.2, Groups A, B, C, DClass II, Div.2, Groups E, F, GClass III
CertificationCSA 1862457
Min. Ambient Temperature• -55 °C (-67 °F)
3.5" (90 mm) 4.80" (122 mm)
4.72
" (12
0 m
m)
4.0"
(100
mm
)