FlowHand shower is limited to 1.9 gpm (7.5L/min)Faucet fill rate designed for 18gpm (68.1L/min)

••

StandardsCertified to meetCSA B-125.1, ASME A112.18.1,ICC 117.1Certified to ANSI/NSF 61/9ADA for lever handleIAPMO R&T UPC certified

•

Cartridge40mm high flow cartridge designNonmetallic/nonferrous and stainless-steelmaterial

••

DESCRIPTIONSolid brass spout chrome finish single leverhigh flow bathtub faucet with diverter buttonTwo (2) 3/4” 5’ braided stainless-steel supply linesPull out hand shower mixer with 5 settings and 5’braided hose in chrome finish

•

••

www.ellasbubbles.com

NOTE: This faucet is designed tobe installed thru:

G.W: 7.75 kg/ 17 lbs.

2-1/2” dia. hole for faucet1/3” dia. hole for mounting rods7/8” dia. hole for hand shower

•••

Ella 2 Piece Single Lever Fast Fill Faucet

Chrome or Brushed NickelAvailable Finishes

Replacing A Valve Cartridge

Step-by-step Instructions to replace a valve cartridge for Ella 2-piece faucets.

Step.3 Take outthe handle and

remove thebrass

escutcheon

Step.1 Removethe Hot/Coldscrew hole

cover.

Step.2 Use anAllen wrench to

remove thehandle Screw.

Step.4 Use awrench to

unscrew thepressure cap.

Step.5 Removethe cartridgeand replace it

with new piece.

*Follow the same steps in reverse to put the handle back on

Rubber Gasket

Steel Washer

2x Nuts

Supply Line Connection for hot

and cold (3/4" supply lines included)

Hand Mixer Connection