IEEE

20

14

- E

MB

EDD

ED E

LEC

TRIC

AL

EMBEDDED ELECTRICAL

CODE TITLE DESCRIPTION

EEE01

Energy-Theft Detection Issues for Advanced Metering Infrastructure In Smart Grid

In this paper, we discuss the background of AMI and identify major security requirements that AMI should meet. Specifically, an attack tree based threat model is first presented to illustrate the energy-theft behaviors in AMI. Current sensor is used to find the power theft in distributed generation. GSM is used for intimation purpose.

EEE02

Integrated Planning for Transition to Low-Carbon Distribution System With Renewable Energy Generation and Demand Response

The proposed methodology is implemented by employing an efficient hybrid algorithm and applied to a typical distribution test system. The results demonstrate the effectiveness in improving the efficiency of RDG operations and mitigating CO footprint of distribution systems, when compared with the conventional planning paradigms.

EEE03

Optimal Scheduling of Critical Peak P r i c i n g C o n s i d e r i n g W i n d Commitment

We propose a multi-stage stochastic mixed integer nonlinear programming model. In addition, we perform various analyses of both the special case of a single-stage problem and the general multi-stage problem analytically and experimentally. Our analysis leads to useful operational insights and policy implications on how to manage a renewable-integrated system more efficiently.

EEE04

Adaptive Electricity Scheduling in Micro grids

In this proposed system renewable energy sources are used. Renewable energy sources are 1.wind 2.solar.voltage sensing unit is used to measure the generated power from the wind and solar. If we get more wind power compare to solar, battery will be charged by wind power. Otherwise battery will be charged by solar power

EEE05

Zigbee based parameters monitoring system For induction motor

The aim of this paper is to monitor and acquire the remote electrical parameters like Voltages, Currents, Powers, Temperature, and send these real values over wireless network. To implement this, a Zigbee model is connected to a programmed digital signal controller which would transmit the data to Zigbee coordinator which is connected to a PC through RS232 serial communication.

EEE06

Analysis on System Sizing and Secondary Benefits Of Centralized PV Street Lighting System

We can design a new system for street light control based on light intensity Here renewable energy source is used. The street light current status information is continuously transmitted using wireless technology.

EEE07

Implementation of a Web of Things based Smart Grid To remotely monitor and control Renewable Energy Sources

In the proposed system we are using the microcontroller for the efficient energy meter monitoring system. This system is connected with the energy meter and the connection from substation with load. The relay is used to decide the source (renewable or nonrenewable) which the user wants to use.

EEE08

Advanced Power Window Motor using Permanent Magnet DC Motor

This proposal greatly reduces the manpower, saves time and operates efficiently without human interference. This project puts forth the first step in achieving the desired target. Sensor network are used monitor the inside parameters of a car.

EEE09

360° sun tracking with automated cleaning system for solar PV modules

This paper has proposed an automatic sunlight adjusting system using solar power for the solar panel control with help of RTC. The proposed system can keep solar panel direct to the sun light, based on RTC. Microcontroller read the time and based on time the solar panel position is changed.

Contact: +91 9158547792 Email: projects@candorminds.com, www.candorminds.com