emi & circuit protection components

EMI & CIRCUIT PROTECTION COMPONENTS

11696 Sorrento Valley Road, Suite J, San Diego, CA 92121 Tel: (858) 755-6080 Fax: (858) 755-6037 www.mcvtech.com 400

INDEX Product Summary ……………………………………………………………….……. 400-1 Chip Varistors

Multilayer Chip Varistors ………...………..……………….…….…………… 401-1 Multilayer Chip Varistor Array ..……………..…….... ……..…………..…….. 402-1 Low Capacitance Multilayer Chip Varistors ………………..……...………… 403-1 EGA Ceramic Chip Varistors ……………………...………………...…...…… 404-1

Ferrite Chip Beads ……………………………………………...…………………..… 405-1 Chip Inductors Ferrite Chip Inductors …………………………..…………………...….……… 406-1 HF Ceramic Chip Inductors ……………..……..…………………...….……… 407-1 Capacitor Arrays

Multilayer Chip Capacitor Array …………………………………..…...……… 408-1 Film Type Chip Capacitor Array ………………………………….…………… 409-1 Chip Feedthru Capacitor Network ………………………………..……….….. 410-1

PPTC Resettable Fuse …………………………………...…….…………………..… 411-1 NTC Thermistors …………………………………...………...……………………..… 412-1 Resistors Low Value Resistors ..……………………..……………………..…………….. 413-1 Thin Film Chip Resistors ..……………….………………..……………..…..… 414-1

EMI & CIRCUIT PROTECTION COMPONENTS

11696 Sorrento Valley Road, Suite J, San Diego, CA 92121 Tel: (858) 755-6080 Fax: (858) 755-6037 www.mcvtech.com 400-1

Products Series Features Applications

Chip Varistors MLV EGA

• Excellent clamping ratio • Low working voltage • Small size (from EIA 0402 & EIA

0603) • High transient current capability • Low capacitance for high frequency

available • Ceramic substrate available • ESD and transient protection

• Noise elimination and semiconductor protection in electrical equipment

Ferrite Chip Beads FCB

• Small and light weight in size • Outstanding high frequency or

impedance characteristics • Wide temperature range • Suitable for wave and reflow soldering

• I/O connects • DC power lines & signal lines • Computers & peripheral equipment • Clock generation circuitry • Consumer products (e.g., TVs,

cordless telephone) Ferrite Chip Inductors FCI

Chi

p In

duct

or

HF Ceramic Chip Inductors

CCI

• Small and light weight in size • Nickel barrier plating over silver

terminations give excellent heat resistance during soldering

• Suitable for high density surface mount

• Decrease dc resistance

• RF and Wireless communication • Information technology equipment

Capacitor Array CN CA CT

• Space, cost, time saving for high density placing requirements

• Four capacitors in one chip • Full range capacitance • Excellent solderability

• Telecommunication (e.g. cellular phone, pagers)

• Consumer products (e.g. PC, camcorder, Audio)

PPTC Resettable Fuse PFR

• Resettable fuse • Radial leaded devices • Bulk packaging or tape reel • Cured, flame retardant epoxy polymer insulating material meets UL 94V-0

requirements

NTC Thermistors NTC

• Automatic placement for SMT process • Silver palladium termination • Wide ranges of operating temperature • Suitable for wave and refold soldering on PCB

Low Value Resistors RLK

• Low TCR value • High precision for current sensing • High power dissipation @ 70°C • Reduce inductance effect

Thin Film Chip Resistors

RT RJ

• High Stability • Low Temperature Coefficient (TCR): ± 25 ppm/°C; ± 50 ppm/°C • High Accuracy: ± 0.1%; ± 0.25%; ± 0.5%; ± 1%

________________________________________________ * Please contact us for detail information, or visit our website

MULTILAYER CHIP VARISTORS

11696 Sorrento Valley Road, Suite J, San Diego, CA 92121

FEATURES

• Excellent clamping ratio • High transient current capability • Low working voltage • Small size (from EIA 0402 to EIA 0603) • ESD and transient protection

DIMENSIONS

Type L 0603 1.60 ± 0.20 0.0402 1.00 ± 0.10 0.

SPECIFICATIONS Working voltage Breakdown Vo

VRMS VDC VV ∆∆∆∆Part No (Volt) max.

(Volt) max.

(Volt) max.

MLV1-0603-M04 4 5.5 8 MLV1-0603-M06 6 8 11 MLV1-0603-M07 7 9 12.5 MLV1-0603-L08 8 11 15 1MLV1-0603-K11 11 14 18 1MLV1-0603-K14 14 18 22 1MLV1-0402-M04 4 5.5 8 MLV1-0402-M06 6 8 11 MLV1-0402-M07 7 9 12.5 MLV1-0402-L08 8 11 15 1MLV1-0402-K11 11 14 18 1MLV1-0402-K14 14 18 22 1

Test Conditions

<50 µA 1 mA DC

____________________________________ * The test condition is 1 KHz and 1 MHz, 1 VVRM ±10% and the** Other specification available upon request TECHNICAL DATA

Operating Temperature Storage Temperature

Response Time Solderability

Solder Leaching ORDERING INFORMATION MLV 1 060 [1] [2] [3] [1] Multilayer Varistor [2] Element Number: 1 – single element [3] Chip Size:

• 0603 – EIA 0603 • 0402 – EIA 0402

L

t

W

Tel: (858) 755-6080 Fax: (858) 755-6037 w

W t 80 ± 0.20 0.80 ± 0.20 50 ± 0.10 0.50 ± 0.10

ltage Clamping Voltage

Peak Current

Transient Energy

VV VC IP Emax

% (Volt) max.

(Amp) max.

(Joule) max.

20 19 30 0.10 20 27 30 0.10 20 27 30 0.10 5 33 30 0.10 0 35 30 0.10 0 40 30 0.10

20 19 20 0.05 20 27 20 0.05 20 27 20 0.05 5 33 20 0.05 0 35 20 0.05 0 40 20 0.05

1 A 8/20 µs

8/20 µs 10/1000 µs @

environment temperature is 25±2°C

-55°C ~ +125°C -55°C ~ +125°C

< 1 ns 235°C, 2 sec

260°C, 10 sec

3 K 11 [4] [5]

[4] Tolerance of Breakdown Volta• M: ±20% • L: ±15% • K: ±10%

[5] Working Voltage: VRMS value

d d

ww.mcvtech.com 401-1

d

0.30 ± 0.20 0.25 ± 0.15

Unit: mm

Capacitance

Cp*

pF

300 270 250 230 235 205 220 190 160 140 140 120 54 37 45 37 45 37 40 34 29 25 25 20

1 VRMS 1 VRMS 1KHz @ 1MHz

ge:

MULTILAYER CHIP VARISTOR ARRAY


FEATURES

• Excellent clamping ratio • High transient current capability • Low working voltage • ESD and transient protection

DIMENSIONS

Type L W t c d p a

1206 Array

3.20 ±0.20

1.60 ±0.20

0.9 max.

0.30 ±0.20

0.30 ±0.20

0.80 ±0.20

0.40±0.20

Unit: mm SPECIFICATIONS

Working voltage Breakdown Voltage Clamping Voltage

Peak Current

Transient Energy Capacitance

VRMS VDC VV ∆∆∆∆VV VC IP Emax Cp Part No (Volt) max.

(Volt) max.

(Volt) max. % (Volt)

max. (Amp) max.

(Joule) max. pF

MLV4-1206-M04 4 5.5 8 20 19 30 0.1 300 270 MLV4-1206-M06 6 8 11 20 27 30 0.1 250 230 MLV4-1206-M07 7 9 12.5 20 27 30 0.1 235 205 MLV4-1206-L08 8 11 15 15 33 30 0.1 220 190 MLV4-1206-K11 11 14 18 10 35 30 0.1 160 140 MLV4-1206-K14 14 18 22 10 40 30 0.1 140 120

1 A 1 VRMS 1 VRMS Test Conditions

<50 µA 1 mA DC 8/20 µs

8/20 µs 10/1000 µs @ 1KHz @ 1MHz

TECHNICAL DATA

Operating Temperature -55°C ~ +125°C Storage Temperature -55°C ~ +125°C

Response Time < 1 ns

Solderability 235°C, 2 sec Solder Leaching 260°C, 10 sec

ORDERING INFORMATION

MLV 4 1206 K 14 [1] [2] [3] [4] [5]

[1] Multilayer Varistor [2] Element Number: 4 – four elements [3] Chip Size: 1206 – EIA 1206 [4] Tolerance of Breakdown Voltage:

• M: ±20% • L: ±15% • K: ±10%

[5] Working Voltage: VRMS value

a p t

c

d

W

L

LOW CAPACITANCE MULTILAYER CHIP VARISTORS


FEATURES

• Low capacitance for high frequency • Quickly response • Small size (from EIA 0402 to EIA 0603) • ESD protection for IEC 6100-4-2 level 4

DIMENSIONS

Type L W t d

0603 1.60 ± 0.20 0.80 ± 0.20 0.80 ± 0.20 0.30 ± 0.20 0402 1.00 ± 0.10 0.50 ± 0.10 0.50 ± 0.10 0.25 ± 0.15


Working voltage Peak Current Clamping Voltage (3)

Leakage Current (4)

ESD Withstanding

Pluses Capacitance (5)

Part No

VRMS (V) VDC (V) IP (1) (A) IP (2) (A) VC (V) Il (µµµµA) Cp (Pf) MLV1-0603-E08 8 12 45 (1a) 20 <50 <1 >1000 40±10 MLV1-0402-E08 8 12 30 (1b) 3 <100 <0.15 >1000 7±2

____________________________________ 1. Per IEC 6100-4-2:

a. 15KV direct discharge to get stable measurement. b. 8KV direct discharge to get stable measurement.

2. Maximum peak current which may be applied with 8/20 µs waveform without device failure. 3. Measurement made 30ns after initiation of pulse. 4. Measured at rated continuous operating voltage. 5. Measured @ 1 MHz, 1 VRMS±10%.

TECHNICAL DATA

Operating Temperature -55°C ~ +125°C Storage Temperature -55°C ~ +125°C


Solderability 235°C, 2 sec Solder Leaching 260°C, 10 sec


MLV 1 0603 E 08 LC [1] [2] [3] [4] [5] [6]

[1] Multilayer Varistor [2] Element Number: 1 – single element [3] Chip Size:

• 0603 – EIA 0603 • 0402 – EIA 0402

[4] E: ESD protection [5] Working Voltage: VRMS value [6] Low Capacitance

L

W

t

d d

EGA CERAMIC CHIP VARISTORS

11696 Sorrento Valley Road, Suite J, San Diego, CA 92121 Tel: (858) 755-6080 Fax:

FEATURES

• Small size (EIA 0402) • ESD protection for IEC 6100-4-2 level 4

CONSTRUTCTION AND DIMENSIONS

• Substrate: Ceramic • Encapsulate: Polymer • Electrodes: Silver/Palladium (Ag/Pd) • End termination: Nickel barrier (3 µm min.),

followed by 90/10 Tin/Lead (Sn/Pb, 3 µm min.)

Type L W T A B

0402 1.00 ± 0.05

0.50 ± 0.05

0.35 ± 0.05

0.25 ± 0.05

0.25 ± 0.10


Working voltage VDC (V)

Clamping Voltage VC (V)(1)

Leakage Current @ 12 VDC

Il (µµµµA)

ESD Withstand

Pluses Part No

Max. Typ. Max. Typ. Max. Min.

EGA1-0402-V12 12 30 50 0.01 1 100 ____________________________________

1. Per IEC 6100-4-2 level 4, 30A @ 8kV, clamp measurement made 30ns after initiatdischarge mode.

2. Measured with 1 VRMS. TECHNICAL DATA

Operating Temperature -55°C ~ +8Storage Temperature -55°C ~ +8


Solderability 235°C, 2 Solder Leaching 260°C, 10


EGA 1 0402 V12 [1] [2] [3] [4]

[1] EGA Technology varistor [2] Element Number: 1 – single element [3] Chip Size: 0402 – EIA 0402

[4] Working Voltage: VDC, max.

(858) 755-6037 www.mcvtech.com 404-1

ESD voltage capability kV

Capacitance @ 1 MHz

Contact discharge

Air discharge Cp (pf)(3)

8 15 1

ion of pulse, all test in contact

5°C

5°C

sec

sec

T

B

L

W

A

FERRITE CHIP BEADS

11696 Sorrento Valley Road, Suite J, San Diego, CA 92121 Tel:

FEATURES

• Small and light weight in size • Outstanding high frequency or impedance characteristics • Wide temperature range • Suitable for wave and reflow soldering

DIMENSIONS

Type W L T D FCB 0603 1.60 0.80 0.80 0.30 FCB 0805 2.00 1.25 0.90 0.50 FCB 1206 3.20 1.60 1.10 0.50

Unit: mm

ORDERING INFORMATION FCB 0603 121 7 [1] [2] [3] [4]

[1] Ferrite Chip Bead [2] Chip Size:

• 0603 – EIA 0603 • 0805 – EIA 0805 • 1206 – EIA 1206

[3] Impedance: 121 = 120 ohm • The first two digits are the

significant figures of the capacitance value

• The third digit denotes the order of 10

[4] Package: • 0 – Bulk • 7 – 7” Reel (Qty. = 4,000 pcs) • 13 – 13” Reel (Qty. = 8,000 pcs)

SPECIFICATIONS Part No

Nominal Impedance

Ohm

DCR Ohm

(max.)

Rated Current

mA FCB 0603-300 30 0.09 400 FCB 0603-400 40 0.10 400 FCB 0603-600 60 0.10 400 FCB 0603-680 68 0.10 200 FCB 0603-800 80 0.15 200 FCB 0603-121 120 0.20 150 FCB 0603-221 220 0.30 150 FCB 0603-301 300 0.45 150 FCB 0603-451 450 0.50 100 FCB 0603-601 600 0.50 100 FCB 0603-751 750 0.60 100 FCB 0603-102 1000 0.70 50 FCB 0805-070 7 0.07 600 FCB 0805-100 10 0.08 600 FCB 0805-110 11 0.08 600 FCB 0805-170 17 0.08 500 FCB 0805-320 32 0.10 500 FCB 0805-400 40 0.10 500 FCB 0805-600 60 0.15 400 FCB 0805-800 80 0.15 400 FCB 0805-900 90 0.20 300 FCB 0805-121 120 0.20 300 FCB 0805-151 150 0.25 300 FCB 0805-221 220 0.25 200 FCB 0805-301 300 0.30 200 FCB 0805-401 400 0.30 200 FCB 0805-601 600 0.40 200 FCB 0805-102 1000 0.45 100 FCB 0805-152 1500 0.50 100 FCB 0805-202 2000 0.60 80 FCB 1206-190 19 0.05 500 FCB 1206-260 26 0.08 500 FCB 1206-310 31 0.10 500 FCB 1206-320 32 0.10 500 FCB 1206-500 50 0.10 400 FCB 1206-600 60 0.10 400 FCB 1206-700 70 0.15 400 FCB 1206-900 90 0.15 400 FCB 1206-121 120 0.15 400 FCB 1206-151 150 0.15 200 FCB 1206-201 200 0.20 200 FCB 1206-401 400 0.20 200 FCB 1206-501 500 0.25 200 FCB 1206-601 600 0.30 200 FCB 1206-801 800 0.30 100 FCB 1206-102 1000 0.40 100 FCB 1206-122 1200 0.40 100 FCB 1206-152 1500 0.50 100 FCB 1206-202 2000 0.50 100

(858) 755-6080 Fax: (858) 755
-6037 www.mcvtech.com 405-1

FERRITE CHIP INDUCTORS


FEATURES • Small and light weight in size • Nickel barrier plating over silver terminations

give excellent heat resistance during soldering • Suitable for high density surface mount • Decrease dc resistance

DIMENSIONS Type W L T D

FCI 0603 1.60 0.80 0.80~1.20 0.30 FCI 0805 2.00 1.25 0.90~1.25 0.50 FCI 1206 3.20 1.60 0.60~1.10 0.50

Unit: mm ORDERING INFORMATION

FCI 0603 2R7 K 7 [1] [2] [3] [4] [5]

[1] Ferrite Chip Inductor [2] Chip Size:

• 0603 – EIA 0603 • 0805 – EIA 0805 • 1206 – EIA 1206

[3] Inductance: 2R7 = 2.7 µH [4] Tolerance:

• M: ±20% • K: ±10% • J: ±5%

[5] Package: • 0 – Bulk • 7 – 7” Reel (Qty. = 4,000 pcs) • 13 – 13” Reel (Qty. = 8,000 pcs)

SPECIFICATIONS

Part No Thickness (T) mm

Inductance µµµµH

Q (min.)

SRF MHz (min.)

DCR Ohm (max.)

Rated Current mA

FCI 0603-R047K 0.8 0.047 10 300 0.30 50 FCI 0603-R068K 0.8 0.068 10 288 0.30 50 FCI 0603-R082K 0.8 0.082 10 282 0.30 50 FCI 0603-R10K 0.8 0.10 15 276 0.50 50 FCI 0603-R12K 0.8 0.12 15 236 0.50 50 FCI 0603-R15K 0.8 0.15 15 207 0.60 50 FCI 0603-R18K 0.8 0.18 15 190 0.60 50 FCI 0603-R22K 0.8 0.22 15 173 0.80 50 FCI 0603-R27K 0.8 0.27 15 157 0.80 50 FCI 0603-R33K 0.8 0.33 15 144 0.85 35 FCI 0603-R39K 0.8 0.39 15 127 1.00 35 FCI 0603-R47K 0.8 0.47 15 121 1.35 35 FCI 0603-R56K 0.8 0.56 15 110 1.55 35 FCI 0603-R68K 0.8 0.68 15 104 1.70 35 FCI 0603-R82K 0.8 0.82 15 98 2.10 35

FERRITE CHIP INDUCTOR


Part No Thickness (T)

mm Inductance

µµµµH Q

(min.) SRF

MHz (min.) DCR

Ohm (max.) Rated Current

mA FCI 0603-1R0K 0.8 1.0 25 87 0.60 25 FCI 0603-1R2K 0.8 1.2 25 74 0.80 25 FCI 0603-1R5K 0.8 1.5 25 69 0.80 25 FCI 0603-1R8K 0.8 1.8 25 64 0.95 25 FCI 0603-2R2K 0.8 2.2 25 58 1.15 15 FCI 0603-2R7K 0.8 2.7 25 52 1.35 15 FCI 0603-3R3K 0.8 3.3 25 46 1.55 15 FCI 0603-3R9K 0.8 3.9 25 41 1.70 15 FCI 0603-4R7K 0.8 4.7 25 38 2.10 15 FCI 0603-5R6K 0.8 5.6 25 26 1.55 5 FCI 0603-6R8K 0.8 6.8 25 23 1.70 5 FCI 0603-8R2K 0.8 8.2 25 21 2.10 5 FCI 0603-10RK 0.8 10.0 20 20 1.85 3 FCI 0603-12RK 0.8 12.0 20 18 2.10 3 FCI 0603-15RK 0.8 15.0 15 17 1.70 1 FCI 0603-18RK 0.8 18.0 15 15 1.85 1 FCI 0603-22RK 0.8 22.0 15 13 2.10 1 FCI 0603-27RK 1.2 27.0 15 12 2.75 1 FCI 0805-R047K 0.9 0.047 15 368 0.20 300 FCI 0805-R068K 0.9 0.068 15 322 0.20 300 FCI 0805-R082K 0.9 0.082 15 294 0.20 300 FCI 0805-R10K 0.9 0.10 20 279 0.30 250 FCI 0805-R12K 0.9 0.12 20 253 0.30 250 FCI 0805-R15K 0.9 0.15 20 230 0.40 250 FCI 0805-R18K 0.9 0.18 20 213 0.40 250 FCI 0805-R22K 0.9 0.22 20 196 0.50 250 FCI 0805-R27K 0.9 0.27 20 173 0.50 250 FCI 0805-R33K 0.9 0.33 20 167 0.55 250 FCI 0805-R39K 0.9 0.39 25 156 0.65 200 FCI 0805-R47K 1.25 0.47 25 144 0.65 200 FCI 0805-R56K 1.25 0.56 25 133 0.75 150 FCI 0805-R68K 1.25 0.68 25 121 0.80 150 FCI 0805-R82K 1.25 0.82 25 115 1.00 150 FCI 0805-1R0K 0.9 1.0 30 87 0.40 50 FCI 0805-1R2K 0.9 1.2 30 75 0.50 50 FCI 0805-1R5K 0.9 1.5 30 69 0.50 50 FCI 0805-1R8K 0.9 1.8 30 64 0.60 50 FCI 0805-2R2K 0.9 2.2 30 78 0.65 30 FCI 0805-2R7K 1.25 2.7 30 52 0.75 30 FCI 0805-3R3K 1.25 3.3 30 48 0.80 30 FCI 0805-3R9K 1.25 3.9 30 44 0.90 30 FCI 0805-4R7K 1.25 4.7 30 41 1.00 30 FCI 0805-5R6K 1.25 5.6 30 37 0.90 15 FCI 0805-6R8K 1.25 6.8 30 34 1.00 15 FCI 0805-8R2K 1.25 8.2 30 30 1.10 15 FCI 0805-10RK 1.25 10.0 30 28 1.15 15 FCI 0805-12RK 1.25 12.0 30 26 1.25 15 FCI 0805-15RK 1.25 15.0 30 22 0.80 5 FCI 0805-18RK 1.25 18.0 30 21 0.90 5 FCI 0805-22RK 1.25 22.0 30 19 1.10 5 FCI 0805-27RK 1.25 27.0 30 17 1.15 5 FCI 0805-33RK 1.25 33.0 30 15 1.75 5

HF CERAMIC CHIP INDUCTORS

11696 Sorrento Valley Road, Suite J, San Diego, CA 92121 Te

FEATURES • Small and light weight in size • Nickel barrier plating over silver

terminations give excellent heat resistance during soldering

• Suitable for high density surface mount • Decrease dc resistance


CCI 0603 2R7 S 7 [1] [2] [3] [4] [5]

[1] Ceramic Chip Inductor [2] Chip Size [3] Inductance: 2R7 = 2.7 µH

[4] Tolerance: M: ±20%,K: ±10%, J: ±5%,S: ±0.3%

SPECIFICATIONS Inductance @ 100 MHz Q Part No

µµµµH @ 100 M @ 800CCI 0603-1R5S 1.5± 0.3 10 38CCI 0603-1R8S 1.8± 0.3 10 36CCI 0603-2R2S 2.2± 0.3 10 34CCI 0603-2R7S 2.7± 0.3 10 32CCI 0603-3R3K 3.3 10 30CCI 0603-3R9K 3.9 10 32CCI 0603-4R7K 4.7 10 32CCI 0603-5R6K 5.6 11 32CCI 0603-6R8K 6.8 11 32CCI 0603-8R2K 8.2 11 28CCI 0603-10RK 10.0 11 31CCI 0603-12RK 12.0 11 30CCI 0603-15RK 15.0 11 26CCI 0603-18RK 18.0 11 25CCI 0603-22RK 22.0 14 30CCI 0603-27RK 27.0 14 26CCI 0603-33RK 33.0 14 24CCI 0603-39RK 39.0 14 20CCI 0805-1R8S 1.8± 0.3 13 45CCI 0805-2R2S 2.2± 0.3 13 48CCI 0805-2R7S 2.7± 0.3 12 36CCI 0805-3R3K 3.3 13 56CCI 0805-3R9K 3.9 15 54CCI 0805-4R7K 4.7 15 50CCI 0805-5R6K 5.6 15 53CCI 0805-6R8K 6.8 15 51CCI 0805-8R2K 8.2 15 53CCI 0805-10RK 10.0 16 45CCI 0805-12RK 12.0 16 48CCI 0805-15RK 15.0 17 48CCI 0805-18RK 18.0 17 43CCI 0805-22RK 22.0 17 47CCI 0805-27RK 27.0 18 38CCI 0805-33RK 33.0 18 35CCI 0805-39RK 39.0 18 40CCI 0805-47RK 47.0 18 33CCI 0805-56RK 56.0 19 31CCI 0805-68RK 68.0 19 29CCI 0805-82RK 82.0 20 9

____________________________________ * Other specification available upon request

DIMENSIONS

Type W L T D 0603 1.60 0.80 0.80 0.30 0805 2.00 1.25 0.90 0.50 Unit: mm

l: (858) 755-6080 Fax: (858) 755-6037 www.mcvtech.com 407-1

[5] Package: 0 – Bulk,

7 – 7” Reel (Qty. = 4,000 pcs), 13 – 13” Reel (Qty. = 8,000 pcs)

SRF Frequency DCR IDC

Rated Current MHz MHz (max.) Ohm (min.) mA 4000 0.10 300 3800 0.12 300 3600 0.16 300 3200 0.20 300 3200 0.22 300 3000 0.25 300 2800 0.28 300 2700 0.29 300 2600 0.30 300 2200 0.33 300 1800 0.35 300 1650 0.40 300 1350 0.45 300 1350 0.50 300 1100 0.55 300 1100 0.60 300 1100 0.65 300 900 0.70 300 6000 0.10 300 6000 0.10 300 6000 0.13 300 6000 0.15 300 5400 0.20 300 4500 0.23 300 4000 0.25 300 3650 0.25 300 3000 0.28 300 2500 0.30 300 2450 0.35 300 2000 0.40 300 1750 0.45 300 1700 0.50 300 1550 0.55 300 1350 0.60 300 1300 0.65 300 1200 0.70 300 1150 0.75 300 1000 0.80 300 850 0.90 300

MULTILAYER CHIP CAPACITOR ARRAY

11696 Sorrento Valley Road, Suite J, San Diego, CA 92121 Tel: (858) 755-6080 Fax: (858) 755-6037

FEATURES

• Space, cost, time saving for high density placing requirement

• Improved placement efficiency • Full range capacitance

CONSTRUCTION AND DIMENSIONS

C1 = C2 = C3 = C4

Physical Dimension Size RecommenL P A G B T W F A1 W

3.20 ±0.15 0.8 typ. 0.40

±0.10 0.40 ±0.30

0.35 ±0.15

0.80 ±0.20

1.60 ±0.15 3.2 0.8 2

SPECIFICATIONS NPO X7R Capacitance

(pF) 16 Volts 25 Volts 50 Volts 16 Volts 25 Volts 50 Volts 210 15 22 33 47 68 100 150 220 330 470 680

1000 1500 2200 3300 4700 6800 10000 15000 22000 33000 47000 68000

100000

ORDERING INFORMATION CA41 N 150 K [1] [2] [3] [4] [1] Series Type [2] Material Code:

• N – NPO • X – X7R • Y – Y5V

[3] Capacitance Value: The first two digits are the significant figures of

the capacitance value; the third digit denotes the order of 10

[4] Capacitance Tolerance: • J: ±5% • K: ±10% • M: ±20% • Z: +80% ~ -20%

[5] Rate Voltag• 016 =• 025 =• 050 =

F

L

A P

G

B

T

W

P1 B1

C1 C2 C3 C4

www.mcvtech.com 408-1

ded Pad Size 1 B1 P1

.6 0.5 0.8 typ.

Unit: mm

Y5V 5 Volts 50 Volts

025 [5] e: 16 V 25 V 50 V

W1 A1

FILM TYPE CHIP CAPACITOR ARRAY

11696 Sorrento Valley Road, Suite J, Sa

FEATURES

• Space, cost, time saving for high density placing requirement • Chip surface capacitance marking available • Improved placement efficiency • Thick film process on ceramic substrate • Excellent solderability


C1 = C2 =

Type L WCN41 3.20±0.20 1.60±CN42 2.00±0.20 1.00±

SPECIFICATIONS Part No

Nominal Capacitance

Value(1)

CT

CN41 10 ~ 470 pF CN42 10 ~ 100 pF

__________________________________1. The test condition is 1 KHz, 1 VRMS±1

the measurement value will be differe2. The standard capacitance tolerance i ORDERING INFORMATION

CN [1

[1] Series Type [2] Element Num[3] Chip Size:

• 1 – EIA 1• 2 – EIA 0

[4] Capacitance V• The first t• The third

[5] Capacitance T• M: ±20% • K: ±10%

CI8I

a p

c

t

W

C1 C2 3 4
C
n Diego,

C3 = C

0.20 0.20

apacitanolerance

± 20% ± 20%

_______0% and tnt. s M tolera

]

ber: 4 –

206 (16804 (10alue:

wo digitdigit deoleranc

C

CA 92121 Tel: (858) 755-6080 Fax: (858) 755-6037 www.mcvtech.com 409-1

4

t c d p a

0.50±0.10 0.30±0.20 0.30±0.20 0.80 typ. 0.50±0.20 0.50±0.10 0.20±0.10 0.20±0.10 0.50 typ. 0.25±0.15

Unit: mm

ce (2)

Dissipation Factor(1)

Temperature Characteristic Rated Voltage

Operating Temperature

Range 3.0% max. ± 20% 16 V -25 ~ +85°C 3.0% max. ± 20% 16V -25 ~ +85°C

_____ he environment temperature is 25°C±2%. If the measuring frequency is 1 MHz,

nce (±20%). The K tolerance is also available upon request.

4 1 151 M [2] [3] [4] [5]

four sets of isolated capacitors in one chip

32) 20)

s are the significant figures of the capacitance value notes the order of 10 e:

d

L

FERRITE CHIP INDUCTOR


Part No Thickness (T) mm

Inductance µµµµH

Q (min.)

SRF MHz (min.)

DCR Ohm (max.)

Rated Current mA

FCI 1206-R047K 0.6 0.047 50 368 0.15 300 FCI 1206-R068K 0.6 0.068 50 322 0.25 300 FCI 1206-R10K 0.6 0.10 25 271 0.25 250 FCI 1206-R12K 0.6 0.12 25 253 0.30 250 FCI 1206-R15K 0.6 0.15 25 230 0.30 250 FCI 1206-R18K 0.6 0.18 25 213 0.40 250 FCI 1206-R22K 0.6 0.22 25 196 0.40 250 FCI 1206-R27K 0.6 0.27 25 173 0.50 250 FCI 1206-R33K 0.6 0.33 25 167 0.60 250 FCI 1206-R39K 1.1 0.39 25 156 0.50 200 FCI 1206-R47K 1.1 0.47 25 144 0.60 200 FCI 1206-R56K 1.1 0.56 25 133 0.70 150 FCI 1206-R68K 1.1 0.68 25 121 0.80 150 FCI 1206-R82K 1.1 0.82 25 115 0.90 150 FCI 1206-1R0K 0.6 1.0 30 87 0.40 100 FCI 1206-1R2K 0.6 1.2 30 75 0.50 100 FCI 1206-1R5K 1.1 1.5 30 69 0.50 50 FCI 1206-1R8K 1.1 1.8 30 64 0.50 50 FCI 1206-2R2K 1.1 2.2 30 58 0.50 50 FCI 1206-2R7K 1.1 2.7 30 52 0.60 50 FCI 1206-3R3K 1.1 3.3 30 48 0.70 50 FCI 1206-3R9K 1.1 3.9 30 44 0.80 50 FCI 1206-4R7K 1.1 4.7 30 41 0.90 50 FCI 1206-5R6K 1.1 5.6 30 37 0.70 25 FCI 1206-6R8K 1.1 6.8 30 34 0.80 25 FCI 1206-8R2K 1.1 8.2 30 30 0.90 25 FCI 1206-10RK 1.1 10.0 30 28 1.00 25 FCI 1206-12RK 1.1 12.0 30 26 1.05 15 FCI 1206-15RK 1.1 15.0 35 22 0.70 5 FCI 1206-18RK 1.1 18.0 35 21 0.70 5 FCI 1206-22RK 1.1 22.0 35 19 0.90 5 FCI 1206-27RK 1.1 27.0 35 17 0.90 5 FCI 1206-33RK 1.1 33.0 35 15 1.05 5

____________________________________ * Other specification available upon request

CHIP FEEDTHRU CAPACITOR NETWORK

11696 Sorrento Valley Road, Suite J, San Diego, CA 92121 Tel: (858) 755-6080 Fax: (858) 755-6037 www.m

FEATURES

• Meets high density placing requirement by integrated 4 feed-through capacitor into one package

• Suitable for EMI suppression of multi-lines • Improved placing efficiency • Low cost solution for capacitor array • Excellent solderability


C1 = C2 = C3 = C4

Type L W t a c d

CT41 3.20±0.20 1.60±0.20 0.60±0.10 0.35±0.15 0.30±0.20 0.30±0.20 CT42 2.00±0.20 1.00±0.20 0.60±0.10 0.20±0.10 0.20±0.10 0.20±0.10

SPECIFICATIONS

Part No Nominal

Capacitance Value(1)

Capacitance Tolerance(2)

Dissipation Factor(1)

Temperature Characteristic Rated Voltage T

CT41 10 ~ 200 pF ± 20% 3.0% max. ± 20% 16 V -CT42 10 ~ 100 pF ± 20% 3.0% max. ± 20% 16V -

______________________________________________ 1. The test condition is 1 KHz, 1 VRMS±10% and the environment temperature is 25°C±2%. If the measuring frequen

the measurement value will be different. 2. The standard capacitance tolerance is M tolerance (±20%). The K tolerance is also available upon request. ORDERING INFORMATION CT 4 1 470 M [1] [2] [3] [4] [5]

[1] Series Type [2] Number of Capacitors: 4 – 4 sets capacitors in one chip [3] Chip Size

• 1 – EIA1206 • 2 – EIA0804

[4] Capacitance Value: The first two digits are the significant figures of the capacitance valuthe third digit denotes the order of 10

[5] Capacitance Tolerance: • K: ±10% • M: ±20%

C1 C2 C3 C4

a p

c

d

W

L

cvtech.com 410-1

p

0.64 typ. 0.40 typ.

Unit: mm

Operating emperature

Range 25 ~ +85°C 25 ~ +85°C

cy is 1 MHz,

e;

PPTC RESETTABLE FUSE

11696 Sorrento Valley Road, Suite J, San Diego, CA 92121 Tel: (858) 755-6080 Fax: (858) 755-6037

FEATURES

• Radial leaded devices • Resettable fuses • Bulk packaging, tape, reel and ammopak available on most models • Cured, flame retardant epoxy polymer insulating material meets UL 94V-0

requirements • QS9000 and ISO 9001 approved


PFR60V Series PFR30V Series Style 1 Style 2 Style 3 Style 4

Physical Dimension Size PhysicalPart No. A (max.) B (max.) C D E Style

PFR60V010xA 7.4 12.7 5.1±0.7 7.6 3.1 1 PFR60V017xA 7.4 12.7 5.1±0.7 7.6 3.1 1 PFR60V020xA 7.4 12.7 5.1±0.7 7.6 3.1 1 PFR60V025xA 7.4 12.7 5.1±0.7 7.6 3.1 1 PFR60V030xA 7.4 13.4 5.1±0.7 7.6 3.1 1 PFR60V040xA 7.4 13.7 5.1±0.7 7.6 3.1 1 PFR60V050xA 7.9 13.7 5.1±0.7 7.6 3.1 1 PFR60V065xA 9.7 15.2 5.1±0.7 7.6 3.1 1 PFR60V075xA 10.4 16.0 5.1±0.7 7.6 3.1 1 PFR60V090xA 11.7 16.7 5.1±0.7 7.6 3.1 1 PFR60V110xA 13.0 18.0 5.1±0.7 7.6 3.1 2 PFR60V135xA 14.5 19.6 5.1±0.7 7.6 3.1 2 PFR60V160xA 16.3 21.3 5.1±0.7 7.6 3.1 2 PFR60V185xA 17.8 22.9 5.1±0.7 7.6 3.1 2 PFR60V250xA 21.3 26.4 5.1±0.7 7.6 3.1 2 PFR60V300xA 24.9 30.0 5.1±0.7 7.6 3.1 2 PFR60V375xA 28.4 33.5 5.1±0.7 7.6 3.1 2 PFR30V090xA 7.4 12.2 5.1±0.7 7.6 3.0 3 PFR30V110xA 8.9 14.0 5.1±0.7 7.6 3.0 3 PFR30V135xA 8.9 18.9 5.1±0.7 7.6 3.0 3 PFR30V160xA 10.2 16.8 5.1±0.7 7.6 3.0 3 PFR30V185xA 12.0 18.4 5.1±0.7 7.6 3.0 3 PFR30V250xA 12.0 18.3 5.1±0.7 7.6 3.0 3 PFR30V300xA 12.0 18.3 5.1±0.7 7.6 3.0 4 PFR30V400xA 14.4 24.9 10.2±0.7 7.6 3.0 4 PFR30V500xA 17.4 24.9 10.2±0.7 7.6 3.0 4 PFR30V600xA 19.3 31.9 10.2±0.7 7.6 3.0 4 PFR30V700xA 22.1 29.8 10.2±0.7 7.6 3.0 4 PFR30V800xA 24.2 32.9 10.2±0.7 7.6 3.0 4 PFR30V900xA 24.2 32.9 10.2±0.7 7.6 3.0 4

A

C

B

D

E A

C

B

D

E A

C

B

D

E


Unit: mm

Characteristics Lead Material

0.51 dia. Sn/NiCu 0.51 dia. Sn/CuFe 0.51 dia. Sn/CuFe 0.51 dia. Sn/CuFe 0.51 dia. Sn/CuFe 0.51 dia. Sn/CuFe 0.51 dia. Sn/Cu 0.51 dia. Sn/Cu 0.51 dia. Sn/Cu 0.51 dia. Sn/Cu 0.81 dia. Sn/Cu 0.81 dia. Sn/Cu 0.81 dia. Sn/Cu 0.81 dia. Sn/Cu 0.81 dia. Sn/Cu 0.81 dia. Sn/Cu 0.81 dia. Sn/Cu 0.51 dia. Sn/NiCu 0.51 dia. Sn/Cu 0.51 dia. Sn/Cu 0.51 dia. Sn/Cu 0.51 dia. Sn/Cu 0.51 dia. Sn/Cu 0.81 dia Sn/Cu 0.81 dia Sn/Cu 0.81 dia Sn/Cu 0.81 dia Sn/Cu 0.81 dia Sn/Cu 0.81 dia Sn/Cu 0.81 dia Sn/Cu

A

C

B

D

E

PPTC RESETTABLE FUSE


SPECIFICATIONS

IHold ITrip Initial Resistance Max. Time to

Trip @ 5xlh

Tripped Power Dissipation

Amps @ 23°°°°C ΩΩΩΩ @ 23°°°°C Part No. Vmax.

(Volts) Imax.

(Amps)

Hold Trip Min. Max. Seconds @ 23°°°°C

Watts @ 23°°°°C

PFR60V010xA 60 40 0.10 0.20 2.20 4.50 4.00 0.38 PFR60V017xA 60 40 0.17 0.34 1.60 3.20 3.00 0.48 PFR60V020xA 60 40 0.20 0.40 1.53 2.84 2.20 0.40 PFR60V025xA 60 40 0.25 0.50 1.05 1.95 2.50 0.45 PFR60V030xA 60 40 0.30 0.60 0.78 1.36 3.00 0.50 PFR60V040xA 60 40 0.40 0.80 0.45 0.86 3.80 0.55 PFR60V050xA 60 40 0.50 1.00 0.40 0.77 4.00 0.75 PFR60V065xA 60 40 0.65 1.30 0.31 0.48 5.30 0.90 PFR60V075xA 60 40 0.75 1.50 0.25 0.40 6.30 0.90 PFR60V090xA 60 40 0.90 1.80 0.20 0.31 7.20 1.00 PFR60V110xA 60 40 1.10 2.20 0.15 0.25 8.20 1.50 PFR60V135xA 60 40 1.35 2.70 0.12 0.19 9.60 1.70 PFR60V160xA 60 40 1.60 3.20 0.09 0.14 11.40 1.90 PFR60V185xA 60 40 1.85 3.70 0.08 0.12 12.60 2.10 PFR60V250xA 60 40 2.50 5.00 0.05 0.08 15.60 2.50 PFR60V300xA 60 40 3.00 6.00 0.04 0.06 19.80 2.80 PFR60V375xA 60 40 3.75 7.50 0.03 0.05 24.00 3.20 PFR30V090xA 30 40 0.90 1.80 0.07 0.12 5.90 0.60 PFR30V110xA 30 40 1.10 2.20 0.05 0.10 6.60 0.70 PFR30V135xA 30 40 1.35 2.70 0.04 0.08 7.30 0.80 PFR30V160xA 30 40 1.60 3.20 0.03 0.07 8.00 0.90 PFR30V185xA 30 40 1.85 3.70 0.03 0.06 8.70 1.00 PFR30V250xA 30 40 2.50 5.00 0.02 0.04 10.30 1.20 PFR30V300xA 30 40 3.00 6.00 0.02 0.05 10.80 2.00 PFR30V400xA 30 40 4.00 8.00 0.01 0.03 12.70 2.50 PFR30V500xA 30 40 5.00 10.00 0.01 0.03 14.50 3.00 PFR30V600xA 30 40 6.00 12.00 0.005 0.02 16.00 3.50 PFR30V700xA 30 40 7.00 14.00 0.005 0.02 17.50 3.80 PFR30V800xA 30 40 8.00 16.00 0.005 0.02 18.80 4.00 PFR30V900xA 30 40 9.00 18.00 0.005 0.01 20.00 4.20


PFR 60V 010 B A [1] [2] [3] [4] [5]

[1] PFR: Polymeric Resettable Fuse, Radial Leaded Type [2] Maximum Voltage Value [3] Hold Current Value: 010 = 0.10 Amps [4] Package Type (x):

• A – AmmoPak • B – Bulk • T – Tape and Reel

[5] Version

NTC THERMISTORS


FEATURES

• Highly reliable material/monolithic structure • Automatic placement for SMT process • Silver Palladium Termination • Wide range of operating temperature (-40 ~ 125°C) • Suitable for wave and refold soldering on PCB


Physical Dimension Size Recommended Pad Size Type L W T G F A1 W1

NTC0603 2.00±0.20 0.50±0.25 1.2 max. 1.25±0.20 3.8 1.2 1.3 typ. NTC0805 1.60±0.20 0.50±0.25 1.1 max. 0.80±0.20 2.6 1.0 0.9 typ.


Part No No Load Resistance @ 25°°°°C (ΩΩΩΩ)

Permissible Current @ 25°°°°C (mA), max.

Working Current (mA), max. B25/85 Constant (K)

NTC0603202xA 2K 47 0.85 3200 NTC0603103xA 10K 18 0.45 3550 NTC0603303xA 30K 12 0.22 3900 NTC0603473xA 47K 11 0.2 4000 NTC0603503xA 50K 11 0.2 4000 NTC0603104xA 100K 8.6 0.14 4100 NTC0603154xA 150K 6.6 0.11 4050 NTC0603204xA 200K 5.5 0.09 4100 NTC0603474xA 470K 3.1 0.05 4350 NTC0805201xA 200 100 3 2700 NTC0805471xA 470 70 2 3000 NTC0805102xA 1K 53 1.5 3100 NTC0805152xA 1.5K 60 1.1 3150 NTC0805202xA 2K 50 0.9 3200 NTC0805332xA 3.3K 42 0.8 3300 NTC0805502xA 5K 27 0.6 3450 NTC0805103xA 10K 20 0.5 3550 NTC0805103xB 10K 20 0.5 3730 NTC0805103XC 10K 20 0.5 3370 NTC0805103xD 10K 20 0.5 3435 NTC0805153xA 15K 17 0.36 3730 NTC0805203xA 20K 15 0.3 3900 NTC0805303xA 30K 13 0.25 3900 NTC0805333xA 33K 13 0.25 3960 NTC0805473xA 47K 12 0.22 4000 NTC0805503xA 50K 12 0.22 4000 NTC0805104xA 100K 9 0.15 4100 NTC0805124xA 120K 8.4 0.14 4100 NTC0805154xA 150K 7.2 0.12 4100 NTC0805204xA 200K 6 0.1 4100 NTC0805474xA 470K 3.6 0.06 4350

ORDERING INFORMATION [3] Resistance @ 25 °C: 103 = 10 x 103 Ω [4] Resistance Tolerance (x):

• F: ±1% • G: ±2%

[1] Series Type • H: ±3% [2] Chip Size: • J: ±5%

• 0603 – EIA 0603 • K: ±10% • 0805 – EIA 0805 [5] Version

W1

L

W

T

G

A1 F

G

NTC 0603 103 J A [1] [2] [3] [4] [5]

LOW VALUE RESISTORS

11696 Sorrento Valley R

FEATURES

• Low TCR value • High precision for current sensing • High power dissipation • Reduce inductance effect


RLK0805 Series RLK7520 Series

Type L RLK0805 2.00±0.RLK7520 7.50±0.

SPECIFICATIONSeries Type

RLK0805

RLK7520

_____________________* Other specification availa ORDERING INFO

[1] Series Type [2] Chip Size:

• 7520 = 7.5• 0805 = EIA

[3] TCR code: • S = 200 pp• T = 350 pp• R = 450 pp

W

A T

L B

W1

A B

T

A1 W1

F

R010

R30

A1

oad, Suite J, San Diego, CA 92121 Tel: (858) 755-6080 Fax: (858) 755-6037

Physical Dimension Size RecommW T A B F

20 1.25±0.20 0.55±0.10 0.40±0.20 0.40±0.20 3.0 30 2.00±0.20 0.70±0.10 0.50±0.30 0.30±0.20 9.5

S Resistance Values Resistance Tolerance TCR (ppm/°°°°C) Po

0.1 Ω ~4.7 Ω 1%, 2%, 5% 200

3 mΩ ~10 mΩ 1%, 2%, 5% 450 (350 for 10 mΩ)

______________ ble upon request

RMATION

mm x 2.0 mm 0805

m m m

[4] Resistance code:

• R003 = 0.003 • 1R50 = 1.50

[5] Resistance Tolerance: • F = ±1% • G = ±2% • J = ±5%

F

W

ended Pad Size A1 W1

1.0 1.3 0.7 3.9

Unit: mm

wer Rating @70/°°°°C 0.25 W

1 W & 2 W

RLK 7520 T R003 G [1] [2] [3] [4] [5]


THIN FILM CHIP RESISTORS

11696 Sorrento Valley Road, Suite J, San Diego, CA 92121 Tel: (858) 755-6080 Fa

FEATURES

• High Stability • Low Temperature Coefficient (TCR): ± 25 ppm/°C; ± 50 ppm/°C • High Accuracy: ± 0.1%; ± 0.25%; ± 0.5%; ± 1%


Type L W H RT0201 0.60 ± 0.10 0.30 ± 0.05 0.25 ± 0.05 RT0402 1.00 ± 0.10 0.50 ± 0.05 0.25 ± 0.05 RT0603 1.60 ± 0.10 0.80 ± 0.10 0.45 ± 0.10 RT0805 2.00 ± 0.10 1.25 ± 0.10 0.50 ± 0.10 RT1206 3.10 ± 0.10 1.60 ± 0.10 0.55 ± 0.10 RT1210 3.10 ± 0.10 2.60 ± 0.15 0.55 ± 0.10 RT2010 5.00 ± 0.10 2.50 ± 0.15 0.55 ± 0.10 RT2512 6.35 ± 0.10 3.20 ± 0.15 0.55 ± 0.10 RJ0201 0.60 ± 0.10 0.30 ± 0.05 0.25 ± 0.05 RJ0402 1.00 ± 0.10 0.50 ± 0.05 0.25 ± 0.05 RJ0603 1.60 ± 0.10 0.80 ± 0.10 0.45 ± 0.10 RJ0805 2.00 ± 0.10 1.25 ± 0.10 0.50 ± 0.10 RJ1206 3.10 ± 0.10 1.60 ± 0.10 0.55 ± 0.10 RJ1210 3.10 ± 0.10 2.60 ± 0.15 0.55 ± 0.10 RJ2010 5.00 ± 0.10 2.50 ± 0.15 0.55 ± 0.10 RJ2512 6.35 ± 0.10 3.20 ± 0.15 0.55 ± 0.10


RT 0805 B 25 [1] [2] [3] [4]

[1] RT (or RJ) series [2] Size – Example: 0805 = EIA 0805

[3] Resistance Tolerance • B = ± 0.1% • C = ± 0.25% • D = ± 0.5% • F = ± 1%

[4] Temperature Coefficient [5] Resistance Value:

• First two digits represent significant figures. Las(Example: 330 = 33 Ω)

Alumina SubstrateInternal Electrode (Ag) Secondary Electrode (Nickel Plated)

External Electrode (Solder Plated)

Resistor (Ni/Cr) Overcoat

x: (858

0.10.20.20.30.40.50.60.60.10.20.20.30.40.50.60.6

33 [5

t digit

H

) 755-6037 www.mcvtech.com 414-1

l1 l2 5 ± 0.10 0.15 ± 0.10 0 ± 0.10 0.25 ± 0.10 5 ± 0.15 0.25 ± 0.15 5 ± 0.20 0.35 ± 0.20 5 ± 0.20 0.40 ± 0.20 0 ± 0.20 0.50 ± 0.20 0 ± 0.20 0.50 ± 0.20 0 ± 0.20 0.50 ± 0.20 5 ± 0.10 0.15 ± 0.10 0 ± 0.10 0.25 ± 0.10 5 ± 0.15 0.25 ± 0.15 5 ± 0.20 0.35 ± 0.20 5 ± 0.20 0.40 ± 0.20 0 ± 0.20 0.50 ± 0.20 0 ± 0.20 0.50 ± 0.20 0 ± 0.20 0.50 ± 0.20

Unit: mm

0 ]

specifies the order of 10.

L

W

l 1 l 1

l 2 l 2

THIN FILM CHIP RESISTORS


SPECIFICATIONS

Type

Power Rating

(Watts) @ 70°°°°C

Working Voltage

(Volt) max.

Overload Voltage

(Volt) max.

Dielectric Withstand

Voltage (Volt)

Resistance Range

(E24/E96) Resistance Tolerance

Temp. Coefficient (ppm/°°°°C)

RT0201 1/20 15 50 50 33Ω ~ 22KΩ

RT0402 1/16 25 100 100 10Ω ~ 100KΩ

RT0603 1/16 25 100 100 10Ω ~ 330KΩ ± 0.1%; ± 25;

RT0805 1/10 100 200 250 10Ω ~ 1MΩ ± 0.25%; ± 50

RT1206 1/8 150 250 250 ± 0.5% RT1210 1/4 150 300 400 RT2010 1/2 150 300 400 RT2512 3/4 150 300 400

RJ0201 1/20 15 50 50 33Ω ~ 22KΩ

RJ0402 1/16 25 100 100 10Ω ~ 100KΩ

RJ0603 1/16 25 100 100 10Ω ~ 330KΩ

RJ0805 1/10 100 200 250 10Ω ~ 1MΩ ± 1% ± 50

RJ1206 1/8 150 250 250 RJ1210 1/4 150 300 400 RJ2010 1/2 150 300 400 RJ2512 3/4 150 300 400

___________________________________ * Operating Temperature Range: -55 ~ +125°C ** Other specification available upon request

emi & circuit protection components

Documents