eml4550 2007 1 eml4550 - engineering design methods concept selection settling on one or more...
TRANSCRIPT
![Page 1: EML4550 2007 1 EML4550 - Engineering Design Methods Concept Selection Settling on one or more promising ideas to pursue to final design Hyman: Chapter](https://reader036.vdocument.in/reader036/viewer/2022081420/56649ca35503460f949627aa/html5/thumbnails/1.jpg)
EML4550 2007 1
EML4550 - Engineering Design Methods
Concept SelectionSettling on one or more promising ideas to pursue to final design
Hyman: Chapter 9, Sec. 9.1 & 9.2Ulrich and Eppinger: Chapters 5 and 6
Dym and Little: Sections 6.1 – 6.3
![Page 2: EML4550 2007 1 EML4550 - Engineering Design Methods Concept Selection Settling on one or more promising ideas to pursue to final design Hyman: Chapter](https://reader036.vdocument.in/reader036/viewer/2022081420/56649ca35503460f949627aa/html5/thumbnails/2.jpg)
EML4550 1-07-2
Concept Development Diagram
IdentifyCustomerNeeds
EstablishTargetSpecs
GenerateProductConcepts
SelectProductConcept
RefineSpecs
AnalyzeCompetitiveProducts
PerformEconomicAnalysis
PlanDesign/DevelopmentProject
MissionStatement
ActionPlan
![Page 3: EML4550 2007 1 EML4550 - Engineering Design Methods Concept Selection Settling on one or more promising ideas to pursue to final design Hyman: Chapter](https://reader036.vdocument.in/reader036/viewer/2022081420/56649ca35503460f949627aa/html5/thumbnails/3.jpg)
EML4550 1-07-3
Concept Selection
The ‘Concept Generation’ phase spawned many ideas (good and bad) and potential solutions to the problem at hand
How do we select from all these competing concepts?
A ‘method’ is needed to systematically weed out poor concepts and select the best one to proceed with to Final Design
![Page 4: EML4550 2007 1 EML4550 - Engineering Design Methods Concept Selection Settling on one or more promising ideas to pursue to final design Hyman: Chapter](https://reader036.vdocument.in/reader036/viewer/2022081420/56649ca35503460f949627aa/html5/thumbnails/4.jpg)
EML4550 1-07-4
Concept Selection Methods
External decision (customers, consultants, etc.) Product “Champion” (strong personal decision) Intuition (no rational method) Pros and Cons (systematic but subjective) Prototype and test (hardware, expensive and time-
consuming) Decision matrices (match characteristics vs. pre-
specified and weighted criteria)
![Page 5: EML4550 2007 1 EML4550 - Engineering Design Methods Concept Selection Settling on one or more promising ideas to pursue to final design Hyman: Chapter](https://reader036.vdocument.in/reader036/viewer/2022081420/56649ca35503460f949627aa/html5/thumbnails/5.jpg)
EML4550 1-07-5
Concept Selection Methods (Cont.)
Although all methods are used in practice, most of the ‘subjective’ methods are very case-specific
Decision matrices represent the most ‘rational’ approach to concept selection
We will focus this section on the Decision Matrix method
![Page 6: EML4550 2007 1 EML4550 - Engineering Design Methods Concept Selection Settling on one or more promising ideas to pursue to final design Hyman: Chapter](https://reader036.vdocument.in/reader036/viewer/2022081420/56649ca35503460f949627aa/html5/thumbnails/6.jpg)
EML4550 1-07-6
Concept Selection: Why a Structured Approach?
A customer-focused product (use the needs as guidelines) A competitive design (do not overlook competing designs) Better product-process coordination (forces manufacturing
issues into the trade-off) Reduced time to market (accelerated ‘downselect’) Effective group decision-making (minimize ‘arbitrary’
decisions and maximize team exposure) Documentation of decision process (not lost in someone’s
‘memory’)
![Page 7: EML4550 2007 1 EML4550 - Engineering Design Methods Concept Selection Settling on one or more promising ideas to pursue to final design Hyman: Chapter](https://reader036.vdocument.in/reader036/viewer/2022081420/56649ca35503460f949627aa/html5/thumbnails/7.jpg)
EML4550 1-07-7
Concept Selection: Why a Structured Approach? (Cont.)
Need to balance:
Desire to have an expedient ‘downselect’ Expediency: proceed to design sooner Faster time-to market Less cost of ‘carrying’ many concepts forward
Desire ‘to know more’ before deciding Risk of making a mistake (pick a loser) Risk of avoiding a concept because it is new (potential big
winner) Engineers tend to be conservative
![Page 8: EML4550 2007 1 EML4550 - Engineering Design Methods Concept Selection Settling on one or more promising ideas to pursue to final design Hyman: Chapter](https://reader036.vdocument.in/reader036/viewer/2022081420/56649ca35503460f949627aa/html5/thumbnails/8.jpg)
EML4550 1-07-8
Decision Matrix Method
Stage 1: Concept Screening Apply an initial ‘filter’ to ‘weed out’ bad concepts and
determine likely ‘winners’. Apply some elements of ‘scoring’ for the purposes of ranking only
Stage 2: Concept Scoring Apply weighted criteria to the concepts and proceed with a
quantitative ‘scoring’ system to pick a winner (or winners)
![Page 9: EML4550 2007 1 EML4550 - Engineering Design Methods Concept Selection Settling on one or more promising ideas to pursue to final design Hyman: Chapter](https://reader036.vdocument.in/reader036/viewer/2022081420/56649ca35503460f949627aa/html5/thumbnails/9.jpg)
EML4550 1-07-9
Decision Matrix Method (Cont.)
Each Stage has 6 steps:
Prepare the selection matrix Rate the concepts Rank the concepts Combine and improve the concepts Select one or more concepts Reflect on the results of the process
![Page 10: EML4550 2007 1 EML4550 - Engineering Design Methods Concept Selection Settling on one or more promising ideas to pursue to final design Hyman: Chapter](https://reader036.vdocument.in/reader036/viewer/2022081420/56649ca35503460f949627aa/html5/thumbnails/10.jpg)
EML4550 1-07-10
Concept Screening
Selection Criteria A B CCriterion 1Criterion 2Criterion 3Sum “+”Sum “0”Sum “-“Net ScoreRank
![Page 11: EML4550 2007 1 EML4550 - Engineering Design Methods Concept Selection Settling on one or more promising ideas to pursue to final design Hyman: Chapter](https://reader036.vdocument.in/reader036/viewer/2022081420/56649ca35503460f949627aa/html5/thumbnails/11.jpg)
EML4550 1-07-11
Screening: Step 1 - Prepare Selection Matrix
Develop a set of criteria Customer needs (condensed into criteria) Corporate needs (cost, manufacturing, liability, image, etc.)
Give equal weight to all criteria
![Page 12: EML4550 2007 1 EML4550 - Engineering Design Methods Concept Selection Settling on one or more promising ideas to pursue to final design Hyman: Chapter](https://reader036.vdocument.in/reader036/viewer/2022081420/56649ca35503460f949627aa/html5/thumbnails/12.jpg)
EML4550 1-07-12
Screening: Step 2 - Rate the Concepts
Give +, -, or neutral rating to each concept based on criteria
Use general notions (no need to get ‘specific’)
Use team consensus (or majority vote)
Refine or split criteria if team consensus is hard to reach
![Page 13: EML4550 2007 1 EML4550 - Engineering Design Methods Concept Selection Settling on one or more promising ideas to pursue to final design Hyman: Chapter](https://reader036.vdocument.in/reader036/viewer/2022081420/56649ca35503460f949627aa/html5/thumbnails/13.jpg)
EML4550 1-07-13
Screening: Step 3 - Rank Concepts
Add scores and build a ranking
Identify a “benchmark” concept (from ranking or from external products - competition)
Group the concepts into three categories: “possible winners”, “neutral”, and “losers”
![Page 14: EML4550 2007 1 EML4550 - Engineering Design Methods Concept Selection Settling on one or more promising ideas to pursue to final design Hyman: Chapter](https://reader036.vdocument.in/reader036/viewer/2022081420/56649ca35503460f949627aa/html5/thumbnails/14.jpg)
EML4550 1-07-14
Screening: Step 4 - Combine and Improve Concepts
Are we throwing away as ‘loser’ a ‘good’ concept because it has one or two negatives? Can they be neutralized?
Can two concepts be combined to preserve ‘better than’ qualities while neutralizing ‘worse than’ items? Can we derive a concept that takes the ‘best of both worlds’?
![Page 15: EML4550 2007 1 EML4550 - Engineering Design Methods Concept Selection Settling on one or more promising ideas to pursue to final design Hyman: Chapter](https://reader036.vdocument.in/reader036/viewer/2022081420/56649ca35503460f949627aa/html5/thumbnails/15.jpg)
EML4550 1-07-15
Screening: Step 5 - Select one or more concepts
If there is a ‘clear’ winner, then select it and proceed with it MISSION ACCOMPLISHED
However, usually more than one concept will survive the screening
Number of concepts to carry forward will depend on resources and time available
![Page 16: EML4550 2007 1 EML4550 - Engineering Design Methods Concept Selection Settling on one or more promising ideas to pursue to final design Hyman: Chapter](https://reader036.vdocument.in/reader036/viewer/2022081420/56649ca35503460f949627aa/html5/thumbnails/16.jpg)
EML4550 1-07-16
Screening: Step 6 - Reflect on the Process
Did we achieve consensus? Were all the team members treated equally? No
trampling? Did we avoid personal agendas? Department
politics?
It is very disruptive to team spirit to ‘drop’ a concept that someone was championing.
Grudges linger for a long time within a team
![Page 17: EML4550 2007 1 EML4550 - Engineering Design Methods Concept Selection Settling on one or more promising ideas to pursue to final design Hyman: Chapter](https://reader036.vdocument.in/reader036/viewer/2022081420/56649ca35503460f949627aa/html5/thumbnails/17.jpg)
EML4550 1-07-17
Concept Screening
Selection Criteria A B CCriterion 1 + 0 +Criterion 2 0 - +Criterion 3 0 + 0Sum “+” 1 1 2Sum “0” 2 1 1Sum “-“ 0 1 0Net Score 1 0 2Rank 2 3 1
An example
![Page 18: EML4550 2007 1 EML4550 - Engineering Design Methods Concept Selection Settling on one or more promising ideas to pursue to final design Hyman: Chapter](https://reader036.vdocument.in/reader036/viewer/2022081420/56649ca35503460f949627aa/html5/thumbnails/18.jpg)
EML4550 1-07-18
From Screening to Scoring (quantitative)
Selection Criteria A A B B C C% R S R S R S
Criterion 1Criterion 2Criterion 3
Score
Rank
Proceed?
R = Rank, S = Score
![Page 19: EML4550 2007 1 EML4550 - Engineering Design Methods Concept Selection Settling on one or more promising ideas to pursue to final design Hyman: Chapter](https://reader036.vdocument.in/reader036/viewer/2022081420/56649ca35503460f949627aa/html5/thumbnails/19.jpg)
EML4550 1-07-19
Scoring: Step 1 - Prepare Selection Matrix
Using the same selection criteria used in screening give relative weight to each (must add to 100%) It is possible to slightly modify the criteria in light of the
surviving concepts Weights to each criterion are given by team consensus or
related to customer needs
An example
![Page 20: EML4550 2007 1 EML4550 - Engineering Design Methods Concept Selection Settling on one or more promising ideas to pursue to final design Hyman: Chapter](https://reader036.vdocument.in/reader036/viewer/2022081420/56649ca35503460f949627aa/html5/thumbnails/20.jpg)
EML4550 1-07-20
Scoring: Step 2 - Rate the Concepts
As with screening, give a ‘score’ to each concept based on a ‘quantitative’ (yet still subjective) numbering scale as follows:
Relative Performance1 - Much worse than reference concept2 - Worse than reference concept3 - Same as reference concept4 - Better than reference concept5 - Much better than reference concept
![Page 21: EML4550 2007 1 EML4550 - Engineering Design Methods Concept Selection Settling on one or more promising ideas to pursue to final design Hyman: Chapter](https://reader036.vdocument.in/reader036/viewer/2022081420/56649ca35503460f949627aa/html5/thumbnails/21.jpg)
EML4550 1-07-21
Scoring: Step 3 - Rank the Concepts
Compute score for each concept
icriteriononjconceptofratingr
criterionofweightw
criteriaofnumbern
jconceptofscores
rws
ij
i
j
n
iijij
______
__
__
___1
![Page 22: EML4550 2007 1 EML4550 - Engineering Design Methods Concept Selection Settling on one or more promising ideas to pursue to final design Hyman: Chapter](https://reader036.vdocument.in/reader036/viewer/2022081420/56649ca35503460f949627aa/html5/thumbnails/22.jpg)
EML4550 1-07-22
From Screening to Scoring
Selection Criteria A A B B C C% R S R S R S
Criterion 1 10 4 .4 2 .2 5 .5Criterion 2 30 2 .6 1 .3 3 .9Criterion 3 60 4 2.4 3 1.8 3 1.8
Score 3.4 2.3 3.2
Rank 1 3 2
Proceed? Y N Y
R = Rank, S = Score
![Page 23: EML4550 2007 1 EML4550 - Engineering Design Methods Concept Selection Settling on one or more promising ideas to pursue to final design Hyman: Chapter](https://reader036.vdocument.in/reader036/viewer/2022081420/56649ca35503460f949627aa/html5/thumbnails/23.jpg)
EML4550 1-07-23
Scoring: Step 4 - Combine and Improve Concepts
As before, can concepts be combined to arrive at a better solution? Looking at the concepts in the new light of ‘scoring’ can
encourage the team to improve on the initial ideas
![Page 24: EML4550 2007 1 EML4550 - Engineering Design Methods Concept Selection Settling on one or more promising ideas to pursue to final design Hyman: Chapter](https://reader036.vdocument.in/reader036/viewer/2022081420/56649ca35503460f949627aa/html5/thumbnails/24.jpg)
EML4550 1-07-24
Scoring: Step 5 - Select One or More Concepts
The final selection is never easy
Do ‘parametric’ studies by assigning different weight distributions and see which concepts come on top on each try
![Page 25: EML4550 2007 1 EML4550 - Engineering Design Methods Concept Selection Settling on one or more promising ideas to pursue to final design Hyman: Chapter](https://reader036.vdocument.in/reader036/viewer/2022081420/56649ca35503460f949627aa/html5/thumbnails/25.jpg)
EML4550 1-07-25
Scoring: Step 6 - Reflect on the Process
Are we ready to proceed with the ‘winning’ concept?
Did the method facilitate the selection?
Can the method be improved?
![Page 26: EML4550 2007 1 EML4550 - Engineering Design Methods Concept Selection Settling on one or more promising ideas to pursue to final design Hyman: Chapter](https://reader036.vdocument.in/reader036/viewer/2022081420/56649ca35503460f949627aa/html5/thumbnails/26.jpg)
EML4550 1-07-26
Concept Selection: Caveats!
Decomposition of product quality Failure to capture relationship among criteria
Subjective criteria Methodical, but still high content of subjectivity
Where to include cost Derived from customer needs, but how about ‘manufacturing’
the product, not all parameters known
Selecting elements of complex systems Can a complex concept be reduced to a set of simpler concepts?
How about interactions between sub-concepts?
Applying concept selection throughout the development process The same approach can apply to the selection of concepts within
a design effort when developing sub-systems of a larger system
![Page 27: EML4550 2007 1 EML4550 - Engineering Design Methods Concept Selection Settling on one or more promising ideas to pursue to final design Hyman: Chapter](https://reader036.vdocument.in/reader036/viewer/2022081420/56649ca35503460f949627aa/html5/thumbnails/27.jpg)
EML4550 1-07-27
Concept Selection: Implications to Project
If many concepts are considered, perform a screening
Record results of screening (and criteria used) Decision matrix for the selection and scores for each
concept Presentation of the ‘winning’ concept