7/17/2019 EN10025-1

http://slidepdf.com/reader/full/en10025-1 1/32

DEUTSCHE NORM February 2005

DIN EN 10025-1   {

© No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut für Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen) .

English price group 14

www.din.de

www.beuth.de05.05 9627913

Document comprises 31 pages.

Hot rolled products of structural steelsPart 1: General technical delivery conditions

English version of DIN EN 10025-1

Warmgewalzte Erzeugnisse aus Baustählen – Teil 1: Allgemeine technische Lieferbedingungen

 A comma is used as the decimal marker.

National foreword

This standard has been prepared by ECISS/TC 10.

The responsible German body involved in its preparation was the Normenausschuss Eisen und Stahl (Steel

and Iron Standards Committee), Technical Committee Stähle für den Stahlbau.DIN V 17006-100 is the standard corresponding to Technical Report CR 10260 referred to in clause 2 of theEN.

 Amendments

This standard differs from DIN EN 10025, March 1994 edition, DIN EN 10113-1, April 1993 edition,DIN EN 10137-1, November 1995 edition, and DIN EN 10155, August 1993 edition, in that it has been com-pletely revised.

Previous editions

DIN 1611: 1924-09, 1928-01, 1929-04, 1930-08, 1935-12; DIN 1612: 1932-01, 1943x-03;DIN 1620: 1924-09, 1958-03; DIN 1621: 1924-09; DIN 1622: 1933-12; DIN 17100: 1957-10, 1966-09, 1980-01;DIN 17102: 1983-10; DIN EN 10025: 1991-01, 1994-03; DIN EN 10113-1: 1993-04;DIN EN 10137-1: 1995-11; DIN EN 10155: 1993-08.

National Annex NA 

Standard referred to(and not included in Normative references and Bibliography  )

DIN 17006-100 Designation systems for steel – Additional symbols for steel names

ICS 77.140.10; 77.140.50 This standard, together withDIN EN 10025-2, February 2005edition, supersedes DIN EN 10025,

March 1994 edition, and, togetherwith DIN EN 10025-5, February 2005edition, supersedes DIN EN 10113-1, Apri l 1993 edition, DIN EN 10137-1,November 1995 edition, andDIN EN 10155, August 1993 edition.

   T   h   i  s  c  o  p  y  w   i   l   l  n  o   t   b  e  u  p   d  a   t  e   d   i  n  c  a  s  e  o   f  c   h  a  n  g  e  s   !

   A  c  c  o  r   d   i  n  g   t  o   D   I   N

  r  e   f  e  r  e  n  c  e  s   h  e  e   t   7 ,  r  e  p  r  o   d  u  c   t   i  o  n  o   f   t   h   i  s  c  o  p  y   i  s

  p  e  r  m   i   t   t  e   d  o  n   l  y   f  o  r   i  n   t  r  a  -  c  o  m  p  a  n  y  p  u  r  p  o  s  e  s  o   f   S   M   S

   D  e  m  a  g   A   G .

7/17/2019 EN10025-1

http://slidepdf.com/reader/full/en10025-1 2/32

7/17/2019 EN10025-1

http://slidepdf.com/reader/full/en10025-1 3/32

English version

ICS 77.140.10; 77.140.50 Supersedes EN 10025 : 1990, EN 10113-1 : 1993,EN 10113-2 : 1993, EN 10113-3 : 1993,EN 10137-1 : 1995 and EN 10137-2 : 1995.

Management Centre: rue de Stassart 36, B-1050 Brussels

European Committee for Standardization

Comité Européen de Normalisation

Europäisches Komitee für Normung

© 2004. CEN – All rights of exploitation in any form and by any meansreserved worldwide for CEN national members.

Ref. No. EN 10025-1 : 2004 E

ÈÉË

EN 10025-1

November 2004

Hot rolled products of structural steelsPart 1: General technical delivery conditions

Produits laminés à chaud en aciersde construction – Partie 1: Conditions

générales techniques de livraison

Warmgewalzte Erzeugnisse aus Bau-stählen – Teil 1: Allgemeine techni-

sche Lieferbedingungen

This European Standard was approved by CEN on 2004-09-30.

CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.

Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to anyCEN member.

The European Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibil ity of a

CEN member into its own language and notified to the Management Centre hasthe same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Cyprus, theCzech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands,Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland, andthe United Kingdom.

7/17/2019 EN10025-1

http://slidepdf.com/reader/full/en10025-1 4/32

Page 2EN 10025-1 : 2004

4

5

5567

7

88888

8

88

9999

99

9

9

9

10

10

1010

10

11

11

11

11

11

1111111212

1212

12

121212

7/17/2019 EN10025-1

http://slidepdf.com/reader/full/en10025-1 5/32

Page 3EN 10025-1 : 2004

12121313

141414

14141415

15

15

15

16

17

20

20202021212222232323232323

 24

 252526262728

30

7/17/2019 EN10025-1

http://slidepdf.com/reader/full/en10025-1 6/32

Page 4EN 10025-1 : 2004

7/17/2019 EN10025-1

http://slidepdf.com/reader/full/en10025-1 7/32

Page 5EN 10025-1 : 2004

7/17/2019 EN10025-1

http://slidepdf.com/reader/full/en10025-1 8/32

Page 6EN 10025-1 : 2004

7/17/2019 EN10025-1

http://slidepdf.com/reader/full/en10025-1 9/32

Page 7EN 10025-1 : 2004

7/17/2019 EN10025-1

http://slidepdf.com/reader/full/en10025-1 10/32

Page 8EN 10025-1 : 2004

7/17/2019 EN10025-1

http://slidepdf.com/reader/full/en10025-1 11/32

Page 9EN 10025-1 : 2004

7/17/2019 EN10025-1

http://slidepdf.com/reader/full/en10025-1 12/32

Page 10EN 10025-1 : 2004

7/17/2019 EN10025-1

http://slidepdf.com/reader/full/en10025-1 13/32

Page 11EN 10025-1 : 2004

7/17/2019 EN10025-1

http://slidepdf.com/reader/full/en10025-1 14/32

Page 12EN 10025-1 : 2004

7/17/2019 EN10025-1

http://slidepdf.com/reader/full/en10025-1 15/32

Page 13EN 10025-1 : 2004

7/17/2019 EN10025-1

http://slidepdf.com/reader/full/en10025-1 16/32

Page 14EN 10025-1 : 2004

7/17/2019 EN10025-1

http://slidepdf.com/reader/full/en10025-1 17/32

Page 15EN 10025-1 : 2004

7/17/2019 EN10025-1

http://slidepdf.com/reader/full/en10025-1 18/32

Page 16EN 10025-1 : 2004

7/17/2019 EN10025-1

http://slidepdf.com/reader/full/en10025-1 19/32

Page 17EN 10025-1 : 2004

7/17/2019 EN10025-1

http://slidepdf.com/reader/full/en10025-1 20/32

Page 18EN 10025-1 : 2004

7/17/2019 EN10025-1

http://slidepdf.com/reader/full/en10025-1 21/32

Page 19EN 10025-1 : 2004

7/17/2019 EN10025-1

http://slidepdf.com/reader/full/en10025-1 22/32

Page 20EN 10025-1 : 2004

7/17/2019 EN10025-1

http://slidepdf.com/reader/full/en10025-1 23/32

Page 21EN 10025-1 : 2004

7/17/2019 EN10025-1

http://slidepdf.com/reader/full/en10025-1 24/32

Page 22EN 10025-1 : 2004

7/17/2019 EN10025-1

http://slidepdf.com/reader/full/en10025-1 25/32

Page 23EN 10025-1 : 2004

7/17/2019 EN10025-1

http://slidepdf.com/reader/full/en10025-1 26/32

7/17/2019 EN10025-1

http://slidepdf.com/reader/full/en10025-1 27/32

Page 25EN 10025-1 : 2004

7/17/2019 EN10025-1

http://slidepdf.com/reader/full/en10025-1 28/32

Page 26EN 10025-1 : 2004

7/17/2019 EN10025-1

http://slidepdf.com/reader/full/en10025-1 29/32

Page 27EN 10025-1 : 2004

7/17/2019 EN10025-1

http://slidepdf.com/reader/full/en10025-1 30/32

Page 28EN 10025-1 : 2004

7/17/2019 EN10025-1

http://slidepdf.com/reader/full/en10025-1 31/32

Page 29EN 10025-1 : 2004

7/17/2019 EN10025-1

http://slidepdf.com/reader/full/en10025-1 32/32

Page 30EN 10025-1 : 2004