en54-2_e

ICS 13.220.20

Descriptors: Fire detection equipment.

Brandmeldeanlagen – Teil 2: Brandmelderzentralen

European Standard EN 54-2 : 1997 has the status of a DIN Standard.

A comma is used as the decimal marker.

National forewordThis standard has been prepared by CEN/TC 72.The responsible German body involved in its preparation was the Normenausschuß Feuerwehrwesen (FireFighting Standards Committee), Technical Committee Brandmelde- und Feueralarmanlagen und elektrischeBetriebsmittel.It should be noted that DIN 14675 and a further German standard relevant to fire detection and alarmsystems, DIN VDE 0833-2, will continue to be valid until April 2002.The DIN Standards corresponding to the IEC Publications referred to in clause 2 of the EN are as follows :

IEC Publication DIN Standard

IEC 68-1 DIN EN 60068-1IEC 68-2-1 DIN EN 60068-2-1IEC 68-2-2 DIN EN 60068-2-2IEC 68-2-3 DIN IEC 68-2-3IEC 68-2-47 DIN EN 60068-2-47IEC 721-3-3 DIN EN 60721-3-3

AmendmentsParts of DIN 14675, January 1984 edition, have been superseded by the specifications of EN 54-2.

Previous editionsDIN 14675: 1979-04, 1984-01; DIN 14675-1: 1966-08; DIN 14675-2: 1966-08; DIN 14675-3: 1966-08.

National Annex NAStandards referred to(and not included in Normative references)

DIN 14675 Fire alarm systemsDIN VDE 0833-2 Fire, intruder and hold-up detecting and warning systems – Requirements for fire

detecting and warning systemsDIN EN 60068-1 Basic environmental testing procedures – Part 1: General and guidance

(IEC 68-1 : 1988 + Corr 1988 + A1 : 1992)DIN EN 60068-2-1 Basic environmental testing procedures – Part 2: Tests – Test A: Cold

(IEC 68-2-1 : 1990 + A1 : 1993 + A2 : 1994)DIN EN 60068-2-2 Basic environmental testing procedures – Part 2: Tests – Test B: Dry heat

(IEC 68-2-2 : 1974 + IEC 68-2-2A : 1976 + A1 : 1993)DIN EN 60068-2-47 Basic environmental testing procedures – Part 2: Tests – Specification for mounting

of components, equipment and other articles for dynamic testsDIN EN 60721-3-3 Classification of degrees of protection provided by enclosures – Part 3: Classification

of groups of environmental parameters and their severities – Section 3: Stationary useand weather-protected locations

Ref. No. DIN EN 54-2 : 1997-12English price group 13 Sales No. 1113

05.98

DEUTSCHE NORM December 1997

EN 54-2{

EN comprises 62 pages.

© No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut für Normung e.V., Berlin.Beuth Verlag GmbH, D-10772 Berlin, has the exclusive right of sale for German Standards (DIN-Normen).

Fire detection and fire alarm systemsPart 2: Control and indicating equipment

English version of DIN EN 54-2

Supersedes parts ofDIN 14675, January1984 edition.

English version

ICS 13.220.20

Descriptors: Fire detection equipment.

Fire detection and fire alarm systemsPart 2: Control and indicating equipment

© 1997. CEN – All rights of exploitation in any form and by any meansreserved worldwide for CEN national members.

Ref. No. EN 54-2 : 1997 E

Brandmeldeanlagen – Teil 2: Brand-melderzentralen

This European Standard was approved by CEN on 1996-12-25.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references concerning such national stand-ards may be obtained on application to the Central Secretariat or to any CENmember.The European Standards exist in three official versions (English, French, German).A version in any other language made by translation under the responsibility of aCEN member into its own language and notified to the Central Secretariat has thesame status as the official versions.CEN members are the national standards bodies of Austria, Belgium, the CzechRepublic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland,and the United Kingdom.

EN 54-2

October 1997

Central Secretariat: rue de Stassart 36, B-1050 Brussels

European Committee for StandardizationComité Européen de NormalisationEuropäisches Komitee für Normung

|ÈÉË

Systèmes de détection et d’alarme in-cendie – Partie 2: Equipement de con-trôle et de signalisation

EN 54-2 : 1997

en54-2_e

Documents

din iec

din standards

amendmentsparts of din

specifications of en

warning systemsdin en

german standards dinnormen

dynamic testsdin en

iec publications