end carriage, geared motor, peripheral equipment kito · pdf fileend carriage, geared motor,...
TRANSCRIPT
Printed in Japan 28.03(A.H)CRGE01-016
End Carriage, Geared Motor, Peripheral Equipment
KITO CRANE
BULLETIN NO. CRGE1603-01
U.S.A.HARRINGTON HOISTS, INC.401 West End Avenue, Manheim, PA 17545, U.S.A.TEL: +1-717-665-2000 FAX: +1-717-665-2861www.harringtonhoists.com
CANADAKITO CANADA INC.309-3815 1st. Avenue, Burnaby, BC. V5C 3V6, CANADATEL: +1-604-291-9955 FAX: +1-604-294-8855E-mail: [email protected]
BRAZILKITO DO BRASIL COMÉRCIO DE TALHAS E GUINDASTES LTDAUnidade 38 do CLE – CENTRO LOGISTICO EMBURua José Semião Rodrigues Agostinho, 1370, Bairro Água Espraiada – Embu das Artes, SP, BRASILTEL: +55-11-3253-1000 FAX: +55-11-3253-1008E-mail: [email protected] www.kito.com/br
GERMANYKITO EUROPE GmbHHeerdter Lohweg 93, D-40549 Düsseldorf, GERMANYTEL: +49-(0)211-528009-00 FAX: +49-(0)211-528009-59E-mail: [email protected]
CHINAJIANGYIN KITO CRANE CO., LTD.18 Cheng Jiang East Road, Jiang Yin, Jiang Su 214429, CHINATEL: +86-510-86199666 FAX: +86-510-86196633www.kaicheng.comKITO HOISTS & CRANES (SHANGHAI) CO., LTD.Room 11J, Zao-Fong Universe Building, No1800 ZhongShan West Road Shanghai 200235, CHINA TEL: +86-21-54488935 FAX: +86-21-54488937www.kito.com.cn
KOREAKITO KOREA CO., LTD.463-400, 3Dong 903, 15, 228Beon-gil, Pangyo-ro, Bundang-gu, Seongnam-si, Gyeonggi-do, KOREATEL: +82-31-600-7450 FAX: +82-31-600-7469www.kito.kr
THAILANDSIAM KITO CO., LTD.205 M.2, T.Klongtumru, A.Muangchonburi, Chonburi 20000, THAILANDTEL: +66-3819-5711 FAX: +66-3819-5715www.siamkito.co.th
INDONESIAPT. KITO INDONESIAWisma Keiai 5F, Jl. Jend. Sudirman Kav.3-4, Jakarta 10220, INDONESIATEL: +62-21-572-4261 FAX: +62-21-572-4267E-mail: [email protected]
INDIAArmsel MHE Pvt. Ltd.4th Floor, Block II, Prestige Towers, No 99 & 100, Residency Road, Bengaluru-560025, INDIATEL: +91-80-49010500 FAX: +91-80-49010555www.armsel.com
TAIWANKITO TAIWAN CO., LTD.12F-1, 128c sec. 3, Ming-Shen East Road, Taipei, TAIWAN 10596TEL: +886-2-2719-7616 FAX: +886-2-2719-6900
Distributed by:
SHINJUKU NS Bldg. 9F, 2-4-1 Nishi-Shinjuku, Shinjuku-ku, Tokyo 163-0809 JAPANTEL: +81-3-5908-0180 FAX: +81-3-5908-0189 www.kito.co.jp/en KITO Global Website: kito.com
•The functions and performance of the products mentioned in the catalog have been designed based on the related regulations and standards. If they are used for other than their intended purposes such as being integrated into your equipment, we will not take any responsibility for accidents attributable to their unintended usages as well as guarantee their performance and functions. Never remodel our products. •When you want to use our products for special purposes, consult us in advance.•When you want to export our products, consult us in advance. There are different standards and regulations from one destination to another.•It is prohibited to reprint, copy or divert all the information in this catalog (product patents, trademarks, photos, designs, copies, illustrations, etc.) without our consent.•The specifications in this catalog are partly subject to change without prior notice.•Product specifications may vary depending on the country. For more details please contact the nearest KITO dealer.
International Sales Subsidiaries
2 3
Cranes are widely used in the workplace to improve work efficiency,
to use limited space effectively and to help reduce costs.
To meet the diversifying demands of the industrial world,
KITO manufactures all kinds of cranes from simple manual cranes to motorized cranes with a single or double girder.
All of our products have been designed and built taking into consideration safety, operability and durability.
In addition, we have the cranes which are quiet and vibrate less and which are suitable
for a working environment where quiet operation is important.
Giving top priority to the every industrial workplace-KITO CRANES.
KITO Crane Applications
Crane Outline
End Carriage Capacity
Features of End Carriages
Geared Motor Capacity
Features of Geared Motors
End Carriage Specifications
Geared Motor Specifications
Crave peripheral Equipment Installation Outline
Control Boxes
SOFTRUN Device
Power Supply Cables and Accessories
Cable Hangers
Crane Girder Allowable Span
Peripheral Equipment Coverage
Note: All measurements used in this catalogue are metric (Sl unit system)
41114151617182628303233343536
Table of CONTENTS
2 3
Cranes are widely used in the workplace to improve work efficiency,
to use limited space effectively and to help reduce costs.
To meet the diversifying demands of the industrial world,
KITO manufactures all kinds of cranes from simple manual cranes to motorized cranes with a single or double girder.
All of our products have been designed and built taking into consideration safety, operability and durability.
In addition, we have the cranes which are quiet and vibrate less and which are suitable
for a working environment where quiet operation is important.
Giving top priority to the every industrial workplace-KITO CRANES.
KITO Crane Applications
Crane Outline
End Carriage Capacity
Features of End Carriages
Geared Motor Capacity
Features of Geared Motors
End Carriage Specifications
Geared Motor Specifications
Crave peripheral Equipment Installation Outline
Control Boxes
SOFTRUN Device
Power Supply Cables and Accessories
Cable Hangers
Crane Girder Allowable Span
Peripheral Equipment Coverage
Note: All measurements used in this catalogue are metric (Sl unit system)
41114151617182628303233343536
Table of CONTENTS
KITO CRANE APPLICATIONS [Overhead cranes]
CRANE TEST EQUIPMENTAt KITO, cranes are tested for durability and reliability using special equipment.
Max. test load50 t
Span30 m
Max. test load100 t
Overhead cranes1: 30/10 t Double girder
2: 2.8 t Single girder
3: 20/2.8 t Double girder
4: 2.8 t Single girder
Traveling crane Hoist
Test equipment capacity at KITO factory
KITO CRANE
1
2 3
44 5
KITO CRANE APPLICATIONS [Overhead cranes]
CRANE TEST EQUIPMENTAt KITO, cranes are tested for durability and reliability using special equipment.
Max. test load50 t
Span30 m
Max. test load100 t
Overhead cranes1: 30/10 t Double girder
2: 2.8 t Single girder
3: 20/2.8 t Double girder
4: 2.8 t Single girder
Traveling crane Hoist
Test equipment capacity at KITO factory
KITO CRANE
1
2 3
44 5
KITO CRANEKITO CRANE APPLICATIONS [Overhead cranes] [Low-head cranes]
Low-head cranes3: 10 t Single girder
4: 1 t Single girder
5: 1 t Single girder
3
4
5
Overhead cranes1: 5 t Double girder
2: 10/5 t Double girder
1
26 7
KITO CRANEKITO CRANE APPLICATIONS [Overhead cranes] [Low-head cranes]
Low-head cranes3: 10 t Single girder
4: 1 t Single girder
5: 1 t Single girder
3
4
5
Overhead cranes1: 5 t Double girder
2: 10/5 t Double girder
1
26 7
KITO CRANE APPLICATIONS [Gantry cranes]
KITO CRANE
4
5
6
7
8
9
10Jib cranes4: 6t Pillar mounted jib crane - auto rotary5: 2t Pillar mounted jib crane6: 2t Pillar mounted jib cranes7: 2t Wall mounted jib crane - auto rotary8: 13t Pillar mounted jib crane - auto rotary9: 2t Wall mounted jib crane - auto rotary10: 1.5t Wall mounted jib cranes - electric traveling
Gantry cranes1: 20 t Gantry cranes
2: 5 t Single leg gentry crane
3: 2.8 t Gantry cranes
1
2
3
[Jib cranes]
8 9
KITO CRANE APPLICATIONS [Gantry cranes]
KITO CRANE
4
5
6
7
8
9
10Jib cranes4: 6t Pillar mounted jib crane - auto rotary5: 2t Pillar mounted jib crane6: 2t Pillar mounted jib cranes7: 2t Wall mounted jib crane - auto rotary8: 13t Pillar mounted jib crane - auto rotary9: 2t Wall mounted jib crane - auto rotary10: 1.5t Wall mounted jib cranes - electric traveling
Gantry cranes1: 20 t Gantry cranes
2: 5 t Single leg gentry crane
3: 2.8 t Gantry cranes
1
2
3
[Jib cranes]
8 9
Girder
Hoist & trolley
Geared motor
Side roller
End carriage
Traveling base (H-beam)
Traveling rail (light rail or square rail)Urethane wheel
Crane span
Traveling rail
Side roller
Geared motorCatwalk
Girder
Side rollerHoist & trolley
Urethane wheel
Crane span
Traveling rail
Side roller
End carriage
Traveling base (H-beam)
Traveling rail (light rail or square rail)
CRANE OUTLINE
OVERHEAD CRANE [Single Girder]
The single girder overhead crane can be installed on traveling
rails on the brackets of building pillars. This type of crane has a
relatively larger capacity and can utilize space below ceiling
rafters, and so a wider lifting range is assured. Guiding the path
using side rollers provides smooth traveling and the girders can
be designed according to the rated load and span. Moreover,
the shorter overall length of the end carriage and the geared-
motor installation in optimum position allows for a more effective
use of work space.
A dual speed type crane is available for speed- controlled
operations. There is also a urethane wheel type version of this
crane that effectively reduces noise and vibrations in travel. It is
recommended for factories near residential areas, duplex office-
homes and for operation at night. Running urethane wheels on
the top flange of the H-beam reduces noise and vibration in
travel. With these cranes it is not necessary to install a light rail,
thus reducing installation costs and time.
Single speed craneThis crane employs geared motors specially designed by KITO
to ensure smooth starts and stops. It is suited for general work.
Dual speed craneThis crane is capable of pendant button-controlled speed shift
between low and high speed (reduction ratio of 4:1). It is suited
for work requiring varied speed operation.
Manual geared type craneThis manual geared type crane balances travel smoothly by
synchronizing the driving wheels on both sides. With a relatively
shorter travel distance, it is suited for low frequency work.
Optional SOFTRUN device This device electrically controls motor speed which enables to
accelerate smoothly in travel and minimizes load swing at
start-up.
It is highly suited for handling high inertia loads or operating long
span cranes.
1
Urethane Wheel type
KITO CRANE
The double girder overhead crane can be installed on traveling
rails on the brackets of building pillars. The double rail type
trolley runs along parallel girders suitable for larger capacity
cranes, and also can utilize space below ceiling rafters, and so a
wider lifting range assured. Smooth traveling is obtained using a
guide mechanism with side rollers, and the girder construction
can be designed according to the rated load and span.
Moreover, the shorter overall length of the end carriage allows
for a more effective use of the work space.
A dual speed type crane is available for speedcontrolled
operations. There is also a urethane wheel type crane that
effectively reduces noise vibration in travel. It is recommended
for factories near residential areas, duplex office-homes and for
operation at night. Running urethane wheels on the top flange
of the H-beam reduces noise and vibration in travel. With these
cranes, it is not necessary to install a light rail thus reducing on
installation costs and time.
Single speed craneThis crane employs geared motors specially designed by KITO
to ensure smooth starts and stops. It is suited for general work.
Dual speed craneThis crane is capable of pendant button-controlled speed shift
between low and high speed (reduction ratio of 4:1). It is suited
for work requiring varied speed operation.
Optional SOFTRUN deviceThis device electrically controls motor speed which enables to
accelerate smoothly in travel and minimizes load swing at
start-up.
It is highly suited for handling high inertia loads or operating long
span cranes.
CRANE OUTLINE 2OVERHEAD CRANE [Double Girder]
Urethane Wheel type
10 11
Girder
Hoist & trolley
Geared motor
Side roller
End carriage
Traveling base (H-beam)
Traveling rail (light rail or square rail)Urethane wheel
Crane span
Traveling rail
Side roller
Geared motorCatwalk
Girder
Side rollerHoist & trolley
Urethane wheel
Crane span
Traveling rail
Side roller
End carriage
Traveling base (H-beam)
Traveling rail (light rail or square rail)
CRANE OUTLINE
OVERHEAD CRANE [Single Girder]
The single girder overhead crane can be installed on traveling
rails on the brackets of building pillars. This type of crane has a
relatively larger capacity and can utilize space below ceiling
rafters, and so a wider lifting range is assured. Guiding the path
using side rollers provides smooth traveling and the girders can
be designed according to the rated load and span. Moreover,
the shorter overall length of the end carriage and the geared-
motor installation in optimum position allows for a more effective
use of work space.
A dual speed type crane is available for speed- controlled
operations. There is also a urethane wheel type version of this
crane that effectively reduces noise and vibrations in travel. It is
recommended for factories near residential areas, duplex office-
homes and for operation at night. Running urethane wheels on
the top flange of the H-beam reduces noise and vibration in
travel. With these cranes it is not necessary to install a light rail,
thus reducing installation costs and time.
Single speed craneThis crane employs geared motors specially designed by KITO
to ensure smooth starts and stops. It is suited for general work.
Dual speed craneThis crane is capable of pendant button-controlled speed shift
between low and high speed (reduction ratio of 4:1). It is suited
for work requiring varied speed operation.
Manual geared type craneThis manual geared type crane balances travel smoothly by
synchronizing the driving wheels on both sides. With a relatively
shorter travel distance, it is suited for low frequency work.
Optional SOFTRUN device This device electrically controls motor speed which enables to
accelerate smoothly in travel and minimizes load swing at
start-up.
It is highly suited for handling high inertia loads or operating long
span cranes.
1
Urethane Wheel type
KITO CRANE
The double girder overhead crane can be installed on traveling
rails on the brackets of building pillars. The double rail type
trolley runs along parallel girders suitable for larger capacity
cranes, and also can utilize space below ceiling rafters, and so a
wider lifting range assured. Smooth traveling is obtained using a
guide mechanism with side rollers, and the girder construction
can be designed according to the rated load and span.
Moreover, the shorter overall length of the end carriage allows
for a more effective use of the work space.
A dual speed type crane is available for speedcontrolled
operations. There is also a urethane wheel type crane that
effectively reduces noise vibration in travel. It is recommended
for factories near residential areas, duplex office-homes and for
operation at night. Running urethane wheels on the top flange
of the H-beam reduces noise and vibration in travel. With these
cranes, it is not necessary to install a light rail thus reducing on
installation costs and time.
Single speed craneThis crane employs geared motors specially designed by KITO
to ensure smooth starts and stops. It is suited for general work.
Dual speed craneThis crane is capable of pendant button-controlled speed shift
between low and high speed (reduction ratio of 4:1). It is suited
for work requiring varied speed operation.
Optional SOFTRUN deviceThis device electrically controls motor speed which enables to
accelerate smoothly in travel and minimizes load swing at
start-up.
It is highly suited for handling high inertia loads or operating long
span cranes.
CRANE OUTLINE 2OVERHEAD CRANE [Double Girder]
Urethane Wheel type
10 11
Geared motor
End carriage
Urethane wheel
Hoist & trolley
Girder
Traveling rail
Hoist & trolleyCatwalk
Safety cage
Girder
End carriage
Geared motor
Traveling rail
CRANE OUTLINE
LOW-HEAD CRANES
The low-head crane is suspended from the traveling rail (I-
beam) which is fixed to the ceiling rafters of the building.
Because the traveling rail location and span can be freely
chosen, the crane can be designed to suit production line
processes. The detaching design for the track wheel and its
axle reduces installation and maintenance time.
A dual speed type crane is available for speedcontrolled
operation. There is also a urethane wheel type version of the
crane that effectively reduces noise and vibration in travel. It is
recommended for factories near residential areas, duplex office-
homes, and for operation at night.
Single speed craneThis crane employs geared motors specially designed by KITO to
ensure smooth starts and stops. It is suited for general work.
Dual speed craneThis crane is capable of pendant button-controlled speed shift
between low and high speed (reduction ratio of 4:1). It is suited
for work requiring varied speed operation.
Manual geared typeThis manual geared type version of the crane balances travel
smoothly by synchronizing the driving wheels on both sides. With a
relatively shorter travel distance, it is suited for low frequency work.
Manual plain type (Low-head only)This is the simplest manual type of crane and lifting and
traveling are operated by hand. It is suited for light work.
Optional SOFTRUN deviceThis device electrically controls motor speed which enables to
accelerate smoothly in travel and minimizes load swing at start-up.
It is highly suited for handling high inertia loads or operating long
span cranes.
3 CRANE OUTLINE
BRIDGE CRANES4
Urethane Wheel type
Kito's Gantry Crane Series offer "Gantry Cranes", which run
on floor mounted rail by its two legs fabricated from steel
sections, and "Single Leg Gantry Cranes", which have the end
of the bridge supported by an end truck running on an
elevated rail.
It is possible to customize this crane for the work and the
installtion site. "Gantry Cranes" can be used both outside and
inside, and in conbination with heavy cranes.
12 13
Geared motor
End carriage
Urethane wheel
Hoist & trolley
Girder
Traveling rail
Hoist & trolleyCatwalk
Safety cage
Girder
End carriage
Geared motor
Traveling rail
CRANE OUTLINE
LOW-HEAD CRANES
The low-head crane is suspended from the traveling rail (I-
beam) which is fixed to the ceiling rafters of the building.
Because the traveling rail location and span can be freely
chosen, the crane can be designed to suit production line
processes. The detaching design for the track wheel and its
axle reduces installation and maintenance time.
A dual speed type crane is available for speedcontrolled
operation. There is also a urethane wheel type version of the
crane that effectively reduces noise and vibration in travel. It is
recommended for factories near residential areas, duplex office-
homes, and for operation at night.
Single speed craneThis crane employs geared motors specially designed by KITO to
ensure smooth starts and stops. It is suited for general work.
Dual speed craneThis crane is capable of pendant button-controlled speed shift
between low and high speed (reduction ratio of 4:1). It is suited
for work requiring varied speed operation.
Manual geared typeThis manual geared type version of the crane balances travel
smoothly by synchronizing the driving wheels on both sides. With a
relatively shorter travel distance, it is suited for low frequency work.
Manual plain type (Low-head only)This is the simplest manual type of crane and lifting and
traveling are operated by hand. It is suited for light work.
Optional SOFTRUN deviceThis device electrically controls motor speed which enables to
accelerate smoothly in travel and minimizes load swing at start-up.
It is highly suited for handling high inertia loads or operating long
span cranes.
3 CRANE OUTLINE
BRIDGE CRANES4
Urethane Wheel type
Kito's Gantry Crane Series offer "Gantry Cranes", which run
on floor mounted rail by its two legs fabricated from steel
sections, and "Single Leg Gantry Cranes", which have the end
of the bridge supported by an end truck running on an
elevated rail.
It is possible to customize this crane for the work and the
installtion site. "Gantry Cranes" can be used both outside and
inside, and in conbination with heavy cranes.
12 13
14 15
Type
Mot
oriz
edU
reth
ane
Whe
el T
ype
Ove
rhea
dLo
w-h
ead
Ove
rhea
d
Dou
ble
Gird
erM
anua
l Typ
e
Ove
rhea
dO
verh
ead
Gea
red
Pla
inG
eare
d
Low
-hea
dU
reth
ane
Whe
elTy
peLo
w-
head
Span (m)
1235
7.51012351235
7.5101235
7.510152035
7.51015201235
0.511235
W.L.L.(t) Page
18
22
19
23
20
21
24
25
24
• Optional SOFTRUN is recommended for color models.
• W.L.L.: Working Load Limit (t).
END CARRIAGE CAPACITY
•To meet customer needs, we have raised performance while offering more standardized models. The track wheel is now made of
a carbon steel construction and is, thus endurable and long lasting (excluding the plain type crane which is made from heat
treated hot- rolled steel plates)
•Products are primer-coated which allows customers to choose the desired top coat color (KITO Yellow (Equivalent to Munsell
7.2YR6.5/14.5) is painted for plain type cranes).
•Punch-mark on end carriages for easy centering and drilling for girders.
Overhead end carriages
Overhead urethane wheel type end carriages
Low-head end carriages
Low-head urethane wheel type end carriages
Manual plain type end carriage
Manual geared type end carriage
EL 010 9
WEO 150 27------------
------- ---------
------
------ S
H------
------
EOELCEOCELWEOCWEOGOGLPL
Ex.: 010 = 1 t, 150 = 15 tTypesRated load
Ex.: 9 = 9 m, 27 = 27 mSpan
Motorized overhead end carriagesMotorized low-head end CarriagesUrethane wheel motorized overhead end carriagesUrethane wheel motorized low-head end carriagesMotorized overhead double girder end carriagesUrethane wheel motorized overhead double girder end carriagesGeared type manual overhead end carriagesGeared type manual low-head and carriagesPlain type manual low-head end carriages
Speed Ex.: L S H SD
Features of end carriages
How to read carriage types
• W.L.L.: indicates the maximum mass (working load limit) for general use.• Traveling speeds are show on pages 18 to 23.
3 6 9 12 15 18 21 27
EO010-12
EO020-12
EO030-12
EO050-12
EO075-12
EO100-12
EL010-12
EL020-12
EL030-12
EL050-12
CEO010-12
CEO020-12
CEO030-12
CEO050-12
CEO075-12
CEO100-12
GO010-12
GO020-12
GO030-12
GO050-12
GL010-12
GL020-12
GL030-12
GL050-12
EL010-15
EL020-15
EL030-15
EL050-15
CEO010-15
CEO020-15
CEO030-15
CEO050-15
WEO030-15
WEO050-15
WEO075-15
WEO100-15
WEO150-15
WEO200-15
CWEO030-15
CWEO050-15
CWEO075-15
CWEO100-15
CWEO150-15
CWEO200-15
EO010-18
EO020-18
EO030-18
EO050-18
EO075-18
EO100-18
CEO010-18
CEO020-18
CEO030-18
CEO050-18
CEO075-18
CEO100-18
EO010-21
EO020-21
EO030-21
EO050-21
EO075-21
EO100-21
CEO010-21
CEO020-21
CEO030-21
CEO050-21
CEO075-21
CEO100-21
WEO030-21
WEO050-21
WEO075-21
WEO100-21
WEO150-21
WEO200-21
CWEO030-21
CWEO050-21
CWEO075-21
CWEO100-21
CWEO150-21
CWEO200-21
WEO030-27
WEO050-27
WEO075-27
WEO100-27
WEO150-27
WEO200-27
CWEO030-27
CWEO050-27
CWEO075-27
CWEO100-27
CWEO150-27
CWEO200-27
EO010-9
EO020-9
EO030-9
EO050-9
EL010-9
EL020-9
EL030-9
EL050-9
CEO010-9
CEO020-9
CEO030-9
CEO050-9
CEL010-9
CEL020-9
GO010-9
GO020-9
GO030-9
GO050-9
PL005-9
PL010-9
EL010-6
EL020-6
EL030-6
EL050-6
PL005-3 PL005-6
PL010-6
GL010-6
GL020-6
GL030-6
GL050-6
=10/12 m/min=20/24 m/min=30/36 m/min=20:5/24:6 m/min
---------
◎Track wheel maintenance is easy because of the open frame construction.◎Travel is smooth because of a guide mechanism with side rollers.
◎Durability has been improved with our own developed urethane wheels.◎The urethane wheels run directly over the top flange of the H-beam, thus reducing noise and vibration in travel. It is not necessary to install a light rail thus reducing installation costs and time.◎Travel is smooth because of a guide mechanism with side rollers.
◎Both the track wheel and track wheel axle are designed for easy detaching thus reducing installation and maintenance time.◎Anti-drop plates are equipped on the carriage (for CSA).
◎This end carriage employs durable urethane wheels developed by KITO and an idling gear in reinforced nylon resin and reduces noise and vibrations in travel.◎Both the track wheel and track wheel axle are designed for easy detaching thus reducing installation maintenance time.
◎The hand pulling operation has become smoother and easier with a pressed metal wheel (0.5 t span 3 m and 1 t span 6 m) and side rollers (1 t span 9 m).
◎Pulling the hand chain makes both wheels move at the same time for balanced smooth traveling.
14 15
Type
Mot
oriz
edU
reth
ane
Whe
el T
ype
Ove
rhea
dLo
w-h
ead
Ove
rhea
d
Dou
ble
Gird
erM
anua
l Typ
e
Ove
rhea
dO
verh
ead
Gea
red
Pla
inG
eare
d
Low
-hea
dU
reth
ane
Whe
elTy
peLo
w-
head
Span (m)
1235
7.51012351235
7.5101235
7.510152035
7.51015201235
0.511235
W.L.L.(t) Page
18
22
19
23
20
21
24
25
24
• Optional SOFTRUN is recommended for color models.
• W.L.L.: Working Load Limit (t).
END CARRIAGE CAPACITY
•To meet customer needs, we have raised performance while offering more standardized models. The track wheel is now made of
a carbon steel construction and is, thus endurable and long lasting (excluding the plain type crane which is made from heat
treated hot- rolled steel plates)
•Products are primer-coated which allows customers to choose the desired top coat color (KITO Yellow (Equivalent to Munsell
7.2YR6.5/14.5) is painted for plain type cranes).
•Punch-mark on end carriages for easy centering and drilling for girders.
Overhead end carriages
Overhead urethane wheel type end carriages
Low-head end carriages
Low-head urethane wheel type end carriages
Manual plain type end carriage
Manual geared type end carriage
EL 010 9
WEO 150 27------------
------- ---------
------
------ S
H------
------
EOELCEOCELWEOCWEOGOGLPL
Ex.: 010 = 1 t, 150 = 15 tTypesRated load
Ex.: 9 = 9 m, 27 = 27 mSpan
Motorized overhead end carriagesMotorized low-head end CarriagesUrethane wheel motorized overhead end carriagesUrethane wheel motorized low-head end carriagesMotorized overhead double girder end carriagesUrethane wheel motorized overhead double girder end carriagesGeared type manual overhead end carriagesGeared type manual low-head and carriagesPlain type manual low-head end carriages
Speed Ex.: L S H SD
Features of end carriages
How to read carriage types
• W.L.L.: indicates the maximum mass (working load limit) for general use.• Traveling speeds are show on pages 18 to 23.
3 6 9 12 15 18 21 27
EO010-12
EO020-12
EO030-12
EO050-12
EO075-12
EO100-12
EL010-12
EL020-12
EL030-12
EL050-12
CEO010-12
CEO020-12
CEO030-12
CEO050-12
CEO075-12
CEO100-12
GO010-12
GO020-12
GO030-12
GO050-12
GL010-12
GL020-12
GL030-12
GL050-12
EL010-15
EL020-15
EL030-15
EL050-15
CEO010-15
CEO020-15
CEO030-15
CEO050-15
WEO030-15
WEO050-15
WEO075-15
WEO100-15
WEO150-15
WEO200-15
CWEO030-15
CWEO050-15
CWEO075-15
CWEO100-15
CWEO150-15
CWEO200-15
EO010-18
EO020-18
EO030-18
EO050-18
EO075-18
EO100-18
CEO010-18
CEO020-18
CEO030-18
CEO050-18
CEO075-18
CEO100-18
EO010-21
EO020-21
EO030-21
EO050-21
EO075-21
EO100-21
CEO010-21
CEO020-21
CEO030-21
CEO050-21
CEO075-21
CEO100-21
WEO030-21
WEO050-21
WEO075-21
WEO100-21
WEO150-21
WEO200-21
CWEO030-21
CWEO050-21
CWEO075-21
CWEO100-21
CWEO150-21
CWEO200-21
WEO030-27
WEO050-27
WEO075-27
WEO100-27
WEO150-27
WEO200-27
CWEO030-27
CWEO050-27
CWEO075-27
CWEO100-27
CWEO150-27
CWEO200-27
EO010-9
EO020-9
EO030-9
EO050-9
EL010-9
EL020-9
EL030-9
EL050-9
CEO010-9
CEO020-9
CEO030-9
CEO050-9
CEL010-9
CEL020-9
GO010-9
GO020-9
GO030-9
GO050-9
PL005-9
PL010-9
EL010-6
EL020-6
EL030-6
EL050-6
PL005-3 PL005-6
PL010-6
GL010-6
GL020-6
GL030-6
GL050-6
=10/12 m/min=20/24 m/min=30/36 m/min=20:5/24:6 m/min
---------
◎Track wheel maintenance is easy because of the open frame construction.◎Travel is smooth because of a guide mechanism with side rollers.
◎Durability has been improved with our own developed urethane wheels.◎The urethane wheels run directly over the top flange of the H-beam, thus reducing noise and vibration in travel. It is not necessary to install a light rail thus reducing installation costs and time.◎Travel is smooth because of a guide mechanism with side rollers.
◎Both the track wheel and track wheel axle are designed for easy detaching thus reducing installation and maintenance time.◎Anti-drop plates are equipped on the carriage (for CSA).
◎This end carriage employs durable urethane wheels developed by KITO and an idling gear in reinforced nylon resin and reduces noise and vibrations in travel.◎Both the track wheel and track wheel axle are designed for easy detaching thus reducing installation maintenance time.
◎The hand pulling operation has become smoother and easier with a pressed metal wheel (0.5 t span 3 m and 1 t span 6 m) and side rollers (1 t span 9 m).
◎Pulling the hand chain makes both wheels move at the same time for balanced smooth traveling.
16 17
Type
Mot
oriz
edU
reth
ane
Whe
el T
ype
Ove
rhea
dLo
w-h
ead
Ove
rhea
d
Dou
ble
Gird
er
Ove
rhea
dU
reth
ane
Whe
elTy
peLo
w-
head
Span (m)
1
2
3
5
7.5
10
1
2
3
5
1
2
3
5
7.5
10
1
2
3
5
7.5
10
15
20
3
5
7.5
10
15
20
G1MO025□-□
G1MO025□-□
G1ML025□-□
G1ML025□-□
G1ML025□-□
G1MO025□-□
G1MO040□-□
G1MO075□-□
G1MO150□-□
G1ML025□-□
G1MO075□-□
G1MO150T-□
G1MO150□-□
G1MO150□-□
G1MO150□-□
G1MO150□-□x2
G1MO150□-□x2
G1MO150□-□x2
G1MO025□-□
G1MO025□-□
G1MO075□-□
G1MO150T-□
G1ML040□-□
G1MO040□-□
G1MO150□-□
G1MO150□-□
G1MO025□-□G1MO040T-□
G1MO025□-□G1MO040T-□
G1MO075□-□G1MO150T-□
G1MO075□-□G1MO150T-□
G1MO025□-□G1MO040T-□
G1MO025□-□G1MO040T-□
G1MO040□-□G1MO075T-□
G1MO075□-□G1MO150T-□
G1MO075□-□G1MO150T-□
G1MO075□-□G1MO150T-□
G1MO150□-□G1MO150□-□x2
G1MO150□-□G1MO150□-□x2
G1MO150□-□G1MO150□-□x2
G1ML040□-□G1ML075T-□
G1ML025□-□ G1ML040T-□
G1MO040□-□G1MO075T-□
G1MO040□-□ G1MO075T-□G1MO075□-□G1MO150T-□G1MO075□-□G1MO150T-□
G1ML040□-□G1ML075T-□
W.L.L.(t) 3 6 9 12 15 18 21 27
G1ML075□-□
* *
G1ML025□-□
G1ML025□-□
G1ML025□-□
G1ML025□-□
G1MO150□-□x2
G1MO150□-□x2
G1MO150□-□x2 G1MO150□-□x2
G1MO150□-□
G1MO150□-□
G1MO150□-□
G1MO075□-□
G1MO075□-□
G1MO075□-□
G1M150T-□
G1MO025□-□
G1MO040T-□
Available onyour request
Available onyour request
GEARED MOTOR CAPACITY
•KITO cranes employ a geared motor with an electromagnetic brake. Brake torque is adjustable from 0 to 50% (for 0.25 kW :from 30 to 80%) of the rated torque of the motor, thus the load swing can be minimized by adjusting the brake torque.
•The motor uses a helical gear, which reduces noise during operation.
•SOFTRUN devices are available to provide smooth starts and minimize swing.
•Motors are available in three different single speed (10/12, 20/24, and 30/36 m/min 50/60 Hz) types and one dual speed (20/5 24/6 m/min 50/60 Hz) type (reduction ratio of 4:1) and they make work more efficient.
G1MO025 L-E
EO010-12
---------- --- --------
---- ---- ----
--- ---
Types of geared motors
O: Overhead L: Low-head Types of end carriages
L: 10/12 m/mim (Low speed)S: 20/24 m/mim (Standard speed)
SD: 20/5 24/6 m/mim (Dual speed)H: 30/36 m/mim (High speed)
Speed (50/60Hz)
E: 200 V/50 Hz, 200-220 V/60 HzZ: 380-415 V/50 Hz, 440-460 V/60 HzB: 220 V/50 Hz, 208-230 V/60 Hz
380 V/50 Hz, 380-460 V/60 Hz
E: 200 V/50 Hz, 200-220 V/60 HzZ: 380-415 V/50 Hz, 440-460 V/60 HzB: 220 V/50 Hz, 208-230 V/60 Hz
380 V/50 Hz, 380-460 V/60 HzPower sources
025: 0.21/0.25 kW040: 0.34/0.4 kW075: 0.63/0.75 kW150: 1.25/1.5 kW
Motor outputs (50/60Hz)
G1MO040 T-Z---------- --- -------- --- ---
Types of geared motors
O: Overhead L: Low-head Types of end carriages
T: 30/36 m/mim (High speed)Speed (50/60Hz)
Power sources
040: (0.25)+0.34/0.4 kW075: (0.4)+0.63/0.75 kW150: (0.75)+1.25/1.5 kW
Motor outputs
Features of geared motors
How to read types (example)
How to order end carriages (example)
When ordering an end carriage and geared motor separately
• 1.5 kWx2 means 2 geared motors are used on 1 end carriage (on side): 4 driving motor type.
• For dual listings, models on the upper line are the low, standard and dual speeds end carriages, whereas models on the lower line are the high speed end carriages. Single listings show the low, standard, high and dual speed end carriages.
• *Available on request ( 2.2 kWx2 for 30/36 m/min. speed).
• W.L.L.: Working Load Limit (t).
Ex. Overhead end carriage 1 t span 12 m. Geared motor for traveling speed 20 m/min, motor output 0.25 kW, and electric voltage 380 V 50 Hz.
Overhead
Standard speed 20 m/min
Voltage 380 V
End carriageshown on page 18
G1MO025S-Z shown on page 26
Geared motor
---- ----
When ordering an end carriage and geared motor as a complete unitEx. Overhead end carriage 1 t span 12 m, traveling speed 20 m/min and electric voltage 380 V 50 Hz.
Traveling speed 20 m/min
Voltage 380 V
EO010-12-S-Z shown on page 18
Complete unit
16 17
Type
Mot
oriz
edU
reth
ane
Whe
el T
ype
Ove
rhea
dLo
w-h
ead
Ove
rhea
d
Dou
ble
Gird
er
Ove
rhea
dU
reth
ane
Whe
elTy
peLo
w-
head
Span (m)
1
2
3
5
7.5
10
1
2
3
5
1
2
3
5
7.5
10
1
2
3
5
7.5
10
15
20
3
5
7.5
10
15
20
G1MO025□-□
G1MO025□-□
G1ML025□-□
G1ML025□-□
G1ML025□-□
G1MO025□-□
G1MO040□-□
G1MO075□-□
G1MO150□-□
G1ML025□-□
G1MO075□-□
G1MO150T-□
G1MO150□-□
G1MO150□-□
G1MO150□-□
G1MO150□-□x2
G1MO150□-□x2
G1MO150□-□x2
G1MO025□-□
G1MO025□-□
G1MO075□-□
G1MO150T-□
G1ML040□-□
G1MO040□-□
G1MO150□-□
G1MO150□-□
G1MO025□-□G1MO040T-□
G1MO025□-□G1MO040T-□
G1MO075□-□G1MO150T-□
G1MO075□-□G1MO150T-□
G1MO025□-□G1MO040T-□
G1MO025□-□G1MO040T-□
G1MO040□-□G1MO075T-□
G1MO075□-□G1MO150T-□
G1MO075□-□G1MO150T-□
G1MO075□-□G1MO150T-□
G1MO150□-□G1MO150□-□x2
G1MO150□-□G1MO150□-□x2
G1MO150□-□G1MO150□-□x2
G1ML040□-□G1ML075T-□
G1ML025□-□ G1ML040T-□
G1MO040□-□G1MO075T-□
G1MO040□-□ G1MO075T-□G1MO075□-□G1MO150T-□G1MO075□-□G1MO150T-□
G1ML040□-□G1ML075T-□
W.L.L.(t) 3 6 9 12 15 18 21 27
G1ML075□-□
* *
G1ML025□-□
G1ML025□-□
G1ML025□-□
G1ML025□-□
G1MO150□-□x2
G1MO150□-□x2
G1MO150□-□x2 G1MO150□-□x2
G1MO150□-□
G1MO150□-□
G1MO150□-□
G1MO075□-□
G1MO075□-□
G1MO075□-□
G1M150T-□
G1MO025□-□
G1MO040T-□
Available onyour request
Available onyour request
GEARED MOTOR CAPACITY
•KITO cranes employ a geared motor with an electromagnetic brake. Brake torque is adjustable from 0 to 50% (for 0.25 kW :from 30 to 80%) of the rated torque of the motor, thus the load swing can be minimized by adjusting the brake torque.
•The motor uses a helical gear, which reduces noise during operation.
•SOFTRUN devices are available to provide smooth starts and minimize swing.
•Motors are available in three different single speed (10/12, 20/24, and 30/36 m/min 50/60 Hz) types and one dual speed (20/5 24/6 m/min 50/60 Hz) type (reduction ratio of 4:1) and they make work more efficient.
G1MO025 L-E
EO010-12
---------- --- --------
---- ---- ----
--- ---
Types of geared motors
O: Overhead L: Low-head Types of end carriages
L: 10/12 m/mim (Low speed)S: 20/24 m/mim (Standard speed)
SD: 20/5 24/6 m/mim (Dual speed)H: 30/36 m/mim (High speed)
Speed (50/60Hz)
E: 200 V/50 Hz, 200-220 V/60 HzZ: 380-415 V/50 Hz, 440-460 V/60 HzB: 220 V/50 Hz, 208-230 V/60 Hz
380 V/50 Hz, 380-460 V/60 Hz
E: 200 V/50 Hz, 200-220 V/60 HzZ: 380-415 V/50 Hz, 440-460 V/60 HzB: 220 V/50 Hz, 208-230 V/60 Hz
380 V/50 Hz, 380-460 V/60 HzPower sources
025: 0.21/0.25 kW040: 0.34/0.4 kW075: 0.63/0.75 kW150: 1.25/1.5 kW
Motor outputs (50/60Hz)
G1MO040 T-Z---------- --- -------- --- ---
Types of geared motors
O: Overhead L: Low-head Types of end carriages
T: 30/36 m/mim (High speed)Speed (50/60Hz)
Power sources
040: (0.25)+0.34/0.4 kW075: (0.4)+0.63/0.75 kW150: (0.75)+1.25/1.5 kW
Motor outputs
Features of geared motors
How to read types (example)
How to order end carriages (example)
When ordering an end carriage and geared motor separately
• 1.5 kWx2 means 2 geared motors are used on 1 end carriage (on side): 4 driving motor type.
• For dual listings, models on the upper line are the low, standard and dual speeds end carriages, whereas models on the lower line are the high speed end carriages. Single listings show the low, standard, high and dual speed end carriages.
• *Available on request ( 2.2 kWx2 for 30/36 m/min. speed).
• W.L.L.: Working Load Limit (t).
Ex. Overhead end carriage 1 t span 12 m. Geared motor for traveling speed 20 m/min, motor output 0.25 kW, and electric voltage 380 V 50 Hz.
Overhead
Standard speed 20 m/min
Voltage 380 V
End carriageshown on page 18
G1MO025S-Z shown on page 26
Geared motor
---- ----
When ordering an end carriage and geared motor as a complete unitEx. Overhead end carriage 1 t span 12 m, traveling speed 20 m/min and electric voltage 380 V 50 Hz.
Traveling speed 20 m/min
Voltage 380 V
EO010-12-S-Z shown on page 18
Complete unit
18 19
9
12
15
18
21
9
12
15
18
21
9
12
15
18
21
9
12
15
18
21
12
18
21
12
18
21
Max.span(m)
Applicabletraveling
rail(mm)
Max.wheel
pressure(kN)
Recommendedwheel
pressure(kN)
Mass(kg/set)
Wheeldiameter
(mm)Type
Dimensions (mm)
A B D E F N Y
7.8
14.7
33.3
14.7
33.3
41.2
61.7
81.3
7.4
13.9
25.0
13.9
25.0
31.0
46.2
60.0
155
175
220
175
220
260
340
440
1586
1696
2356
2792
1696
2082
2422
2792
2082
2422
2792
1852
2402
2821
2081
2421
2821
2081
2849
1307
1445
2105
2499
1445
1761
2101
2499
1761
2101
2499
1531
2106
2506
1766
2106
2506
1766
2509
800
900
1200
1400
900
1000
1200
1400
1000
1200
1400
900
1200
1400
900
1200
1400
900
1400
110
131
155
131
155
153
184
177
184
177
234
32
39
32
39
46
317
383
460
383
460
559
553
592
188
233
239
188
239
279
239
279
239
346
156
202
265
502
202
384
398
502
384
398
502
355
543
665
525
627
665
525
1027
100·125·150
150·175·200
200·250
1
2
3
5
7.5
10
W.L.L.(t)
☆CEO010- 9
☆CEO010-12
CEO010-15
CEO010-18
CEO010-21
CEO020- 9
☆CEO020-12
CEO020-15
CEO020-18
CEO020-21
CEO030- 9
CEO030-12
CEO030-15
CEO030-18
CEO030-21
CEO050- 9
☆CEO050-12
CEO050-15
CEO050-18
CEO050-21
☆CEO075-12
CEO075-18
CEO075-21
☆CEO100-12
CEO100-18
☆CEO100-21
*5*4
*2*1 *3
(1220)
0.21/0.25 0.21/0.25
0.34/0.4 0.34/0.4
0.63/0.75
0.21/0.25
0.34/0.4
0.34/0.4
0.63/0.75
0.63/0.75
1.25/1.5
0.21/0.25
0.34/0.4
0.34/0.4
0.63/0.75
0.63/0.75
1.25/1.5
0.21/0.25
0.34/0.4
0.34/0.4
0.63/0.75
0.63/0.75
1.25/1.5
1.25/1.5x2
0.63/0.75
0.63/0.75
0.34/0.4
0.21/0.25
0.34/0.4
0.21/0.25
1.25/1.5
0.34:0.084/0.4:0.1
0.21:0.053/0.25:0.063
0.21:0.053/0.25:0.063
0.34:0.084/0.4:0.1
0.63:0.16/0.75:0.19
0.34:0.084/0.4:0.1
0.63:0.16/0.75:0.19
0.63:0.16/0.75:0.19
9
12
18
21
9
12
18
21
9
12
18
21
9
12
18
21
12
18
21
12
18
21
Max.span(m)
Applicablesquare
rail(mm)
Max.wheel
pressure(kN)
Mass(kg/set)
Wheeldiameter
(mm)Type
Dimensions (mm)
L
10/12 20/24 30/36 20:5/24:6
SA B D E F N X Y
H SD
Traveling motor output (kWx2)50/60 Hz (m/min)
L
10/12 20/24 30/36 20:5/24:6
S H SD
Traveling motor output (kWx2)50/60 Hz (m/min)
9.31
17.6
31.4
17.6
31.4
20.6
23.5
31.4
44.1
73.5
79.4
73.5
79.4
95
125
175
125
175
140
155
175
210
250
300
250
300
1580
2280
2691
1580
2280
2691
1580
2280
2691
1490
2296
2696
1645
2345
2745
1645
2345
2745
1400
2100
2505
1400
2100
2505
1400
2100
2505
1300
2100
2500
1405
2105
2505
1405
2105
2505
900
1200
1400
900
1200
1400
900
1200
1400
800
1200
1400
900
1200
1400
900
1200
1400
109
124
144
114
124
144
114
149
144
124
138
163
138
163
183
138
163
183
15.5
20.5
23.5
321
325
326
325
326
325
326
323
376
445
119
123
119
123
143
162
171
191
221
176
221
176
221
224
264
224
264
324
224
264
324
132
197
380
146
212
380
150
252
380
197
374
496
384
586
724
384
586
724
1
2
3
5
7.5
10
W.L.L.(t)
□32·□40□38·□45
□32·□40□38·□45
*2*1
□45·□50
□45·□50
□50
□55·□60
EO010- 9
☆EO010-12
EO010-18
EO010-21
EO020- 9
☆EO020-12
EO020-18
EO020-21
EO030- 9
☆EO030-12
EO030-18
EO030-21
☆EO050- 9
EO050-12
EO050-18
EO050-21
☆EO075-12
EO075-18
EO075-21
☆EO100-12
EO100-18
EO100-21
-
B
Frame
Geared motor
Track wheelTrack wheel
FrameTraveling rail
(H-beam)Side roller Ground parts
(one side frame only)
Side rollerSquare rail
AE
X
N E N
D
BGeared motor
A
D
F
Y
F
Y
END CARRIAGE SPECIFICATIONS
Motorized Overhead End Carriage Specifications Urethane Wheel Motorized Overhead End Carriage Specifications
Ex. Above photo shows EO030-12Some types of motors are mounted in parallel on the frames.
Ex. Above photo shows EO030-15Some types of motors are mounted in parallel on the frames.
•W.L.L.: Working Load Limit (t). •Weight in parentheses is for high speed (H). *1: Contact your nearest Kito distributor for sizes other than listed above.*2: Wheel pressure under the W.L.L. beneath the end carriage with standard girder and maximum span to verify endurance of the structure.*3: In case of regular use of more than 80% of W.L.L. or frequent operation at a particular position, select an end carriage to make the wheel pressure the same as or less than the recommended wheel pressure. *4: The size including the projection of the side roller plate. *5: The size with the standard speed (s) geared motor. ☆: Geared motors installed in diagonal positions as shown in the above photo. •When planning a girder or cart, contact your nearest Kito distributor.
•W.L.L.: Working Load Limit (t).*1: The size including the projection of the side roller plate.*2: The size with the standard speed (s) geared motor.☆: Geared motors installed in diagonal positions as shown in the above photo.•When planning a girder or cart, contact your nearest Kito distributor.
18 19
9
12
15
18
21
9
12
15
18
21
9
12
15
18
21
9
12
15
18
21
12
18
21
12
18
21
Max.span(m)
Applicabletraveling
rail(mm)
Max.wheel
pressure(kN)
Recommendedwheel
pressure(kN)
Mass(kg/set)
Wheeldiameter
(mm)Type
Dimensions (mm)
A B D E F N Y
7.8
14.7
33.3
14.7
33.3
41.2
61.7
81.3
7.4
13.9
25.0
13.9
25.0
31.0
46.2
60.0
155
175
220
175
220
260
340
440
1586
1696
2356
2792
1696
2082
2422
2792
2082
2422
2792
1852
2402
2821
2081
2421
2821
2081
2849
1307
1445
2105
2499
1445
1761
2101
2499
1761
2101
2499
1531
2106
2506
1766
2106
2506
1766
2509
800
900
1200
1400
900
1000
1200
1400
1000
1200
1400
900
1200
1400
900
1200
1400
900
1400
110
131
155
131
155
153
184
177
184
177
234
32
39
32
39
46
317
383
460
383
460
559
553
592
188
233
239
188
239
279
239
279
239
346
156
202
265
502
202
384
398
502
384
398
502
355
543
665
525
627
665
525
1027
100·125·150
150·175·200
200·250
1
2
3
5
7.5
10
W.L.L.(t)
☆CEO010- 9
☆CEO010-12
CEO010-15
CEO010-18
CEO010-21
CEO020- 9
☆CEO020-12
CEO020-15
CEO020-18
CEO020-21
CEO030- 9
CEO030-12
CEO030-15
CEO030-18
CEO030-21
CEO050- 9
☆CEO050-12
CEO050-15
CEO050-18
CEO050-21
☆CEO075-12
CEO075-18
CEO075-21
☆CEO100-12
CEO100-18
☆CEO100-21
*5*4
*2*1 *3
(1220)
0.21/0.25 0.21/0.25
0.34/0.4 0.34/0.4
0.63/0.75
0.21/0.25
0.34/0.4
0.34/0.4
0.63/0.75
0.63/0.75
1.25/1.5
0.21/0.25
0.34/0.4
0.34/0.4
0.63/0.75
0.63/0.75
1.25/1.5
0.21/0.25
0.34/0.4
0.34/0.4
0.63/0.75
0.63/0.75
1.25/1.5
1.25/1.5x2
0.63/0.75
0.63/0.75
0.34/0.4
0.21/0.25
0.34/0.4
0.21/0.25
1.25/1.5
0.34:0.084/0.4:0.1
0.21:0.053/0.25:0.063
0.21:0.053/0.25:0.063
0.34:0.084/0.4:0.1
0.63:0.16/0.75:0.19
0.34:0.084/0.4:0.1
0.63:0.16/0.75:0.19
0.63:0.16/0.75:0.19
9
12
18
21
9
12
18
21
9
12
18
21
9
12
18
21
12
18
21
12
18
21
Max.span(m)
Applicablesquare
rail(mm)
Max.wheel
pressure(kN)
Mass(kg/set)
Wheeldiameter
(mm)Type
Dimensions (mm)
L
10/12 20/24 30/36 20:5/24:6
SA B D E F N X Y
H SD
Traveling motor output (kWx2)50/60 Hz (m/min)
L
10/12 20/24 30/36 20:5/24:6
S H SD
Traveling motor output (kWx2)50/60 Hz (m/min)
9.31
17.6
31.4
17.6
31.4
20.6
23.5
31.4
44.1
73.5
79.4
73.5
79.4
95
125
175
125
175
140
155
175
210
250
300
250
300
1580
2280
2691
1580
2280
2691
1580
2280
2691
1490
2296
2696
1645
2345
2745
1645
2345
2745
1400
2100
2505
1400
2100
2505
1400
2100
2505
1300
2100
2500
1405
2105
2505
1405
2105
2505
900
1200
1400
900
1200
1400
900
1200
1400
800
1200
1400
900
1200
1400
900
1200
1400
109
124
144
114
124
144
114
149
144
124
138
163
138
163
183
138
163
183
15.5
20.5
23.5
321
325
326
325
326
325
326
323
376
445
119
123
119
123
143
162
171
191
221
176
221
176
221
224
264
224
264
324
224
264
324
132
197
380
146
212
380
150
252
380
197
374
496
384
586
724
384
586
724
1
2
3
5
7.5
10
W.L.L.(t)
□32·□40□38·□45
□32·□40□38·□45
*2*1
□45·□50
□45·□50
□50
□55·□60
EO010- 9
☆EO010-12
EO010-18
EO010-21
EO020- 9
☆EO020-12
EO020-18
EO020-21
EO030- 9
☆EO030-12
EO030-18
EO030-21
☆EO050- 9
EO050-12
EO050-18
EO050-21
☆EO075-12
EO075-18
EO075-21
☆EO100-12
EO100-18
EO100-21
-
B
Frame
Geared motor
Track wheelTrack wheel
FrameTraveling rail
(H-beam)Side roller Ground parts
(one side frame only)
Side rollerSquare rail
AE
X
N E N
D
BGeared motor
A
D
F
Y
F
Y
END CARRIAGE SPECIFICATIONS
Motorized Overhead End Carriage Specifications Urethane Wheel Motorized Overhead End Carriage Specifications
Ex. Above photo shows EO030-12Some types of motors are mounted in parallel on the frames.
Ex. Above photo shows EO030-15Some types of motors are mounted in parallel on the frames.
•W.L.L.: Working Load Limit (t). •Weight in parentheses is for high speed (H). *1: Contact your nearest Kito distributor for sizes other than listed above.*2: Wheel pressure under the W.L.L. beneath the end carriage with standard girder and maximum span to verify endurance of the structure.*3: In case of regular use of more than 80% of W.L.L. or frequent operation at a particular position, select an end carriage to make the wheel pressure the same as or less than the recommended wheel pressure. *4: The size including the projection of the side roller plate. *5: The size with the standard speed (s) geared motor. ☆: Geared motors installed in diagonal positions as shown in the above photo. •When planning a girder or cart, contact your nearest Kito distributor.
•W.L.L.: Working Load Limit (t).*1: The size including the projection of the side roller plate.*2: The size with the standard speed (s) geared motor.☆: Geared motors installed in diagonal positions as shown in the above photo.•When planning a girder or cart, contact your nearest Kito distributor.
20 21
15
21
27
15
21
27
15
21
27
15
21
27
15
21
27
15
21
27
Max.span(m)
Applicablesquare
rail(mm)
Max.wheel
pressure(kN)
Mass(kg/set)
Wheeldiameter
(mm)Type
Dimensions (mm)
L
10/12 20/24 30/36 20:5/24:6
SA B D E F N X Y
H SD
Traveling motor output (kWx2)50/60 Hz (m/min)
31.4
44.1
73.5
79.4
73.5
82.3
100
131
162
175
210
250
300
350
400
450
2615
2845
3395
2845
3095
3425
3098
3478
3098
3288
3698
4028
4528
2400
2630
3180
2630
2855
3185
2855
3235
2855
3045
3430
3760
4260
1995
2195
2140
2195
2390
2590
2395
2740
2395
2540
2840
3150
3500
124
128
134
138
150
23.5
27.5
325
375
444
445
529
530
531
143
162
189
224
274
324
274
324
328
408
382
449
504
449
554
736
686
799
686
828
1136
1448
1945
□50
□55·□60
□55·□60·□65
3
5
7.5
10
15
20
W.L.L.(t)
WEO030-15
WEO030-21
WEO030-27
WEO050-21
WEO050-21
WEO050-27
WEO075-15
WEO075-21
WEO075-27
WEO100-15
WEO100-21
WEO100-27
WEO100-15
WEO150-21
WEO150-27
WEO200-15
WEO200-21
WEO200-27
*2*1
15
21
27
15
21
27
15
21
27
15
21
27
15
21
27
27
15
15
21
21
27
27
Max.span(m)
Applicablesquare
rail(mm)
Max.wheel
pressure(kN)
Recommendedwheel
pressure(kN)
Mass(kg/set)
Wheeldiameter
(mm)Type
Dimensions (mm)
L
10/12 20/24 30/36 20:5/24:6
SA B D E F N Y
H SD
Traveling motor output (kWx2)50/60 Hz (m/min)
0.63/0.75
1.25/1.5
1.25/1.5x2
1.25/1.5
1.25/1.5x2
—
1.25/1.5x2
—
1.25/1.5x2
—
1.25/1.5x2
—
0.63/0.75
1.25/1.5
1.25/1.5x2
1.25/1.5
1.25/1.5x2
—
1.25/1.5x2
—
1.25/1.5x2
—
1.25/1.5x2
—
33.3
41.2
43.1
41.2
61.7
41.2
61.7
41.2
43.1
41.2
43.1
61.7
81.3
25.0
31.0
32.3
31.0
46.2
31.0
46.2
31.0
32.3
31.0
32.3
46.2
60.0
220
260
300
260
340
260x2
340
260x2
300x2
260x2
300x2
340x2
440x2
2851
3111
3211
3111
3091
3771
3091
3771
4059
3771
4059
4412
3992
4412
5172
5292
4742
4872
5172
5292
5422
5552
2539
2796
2896
2796
2776
3456
2776
3456
3701
3456
3701
4063
3643
4063
4823
4943
4393
4523
4823
4943
5073
5203
2085
2295
2140
2295
2230
2700
2230
2700
2900
2700
2900
3220
2790
3220
3800
3840
3380
3420
3800
3840
4070
4110
155
153
163
153
177
149
177
149
159
149
159
180
212
39
46
39
46
459
560
564
560
553
559
553
559
564
559
564
554
593
709
593
709
593
709
593
709
239
289
239
289
346
289
346
426
346
426
524
653
881
653
930
1160
930
1160
1438
1160
1438
1672
1378
1672
2575
2696
2214
2332
2575
2696
2944
3067
1.25/1.5
1.25/1.5x2
1.25/1.5
1.25/1.5x2
—
2.2x2
—
2.2x2
—
2.2x2
—
2.2x2
150·175·200
175·200
150·175·200
175·200
200·250
250·300
3
5
7.5
10
15
20
W.L.L.(t)
CWEO030-15
CWEO030-21
CWEO030-27
CWEO050-15
CWEO050-21
CWEO050-27
CWEO075-15
CWEO075-21
CWEO075-27
CWEO100-15
CWEO100-21
CWEO100-27
CWEO150-15
CWEO150-21
CWEO150-27
CWEO150-27H
CWEO200-15
CWEO200-15H
CWEO200-21
CWEO200-21H
CWEO200-27
CWEO200-27H
*5*4
*2*1 *3
(1588)
(2083)
0.21/0.25 0.21/0.25 0.34/0.4
0.63/0.750.34/0.4 0.34/0.4
0.63/0.75 0.63/0.75
1.25/1.5
1.25/1.5x21.25/1.5 1.25/1.5 -
0.21:0.053/0.25:0.063
0.63:0.16/0.75:0.19
0.34:0.084/0.4:0.1
0.63:0.16/0.75:0.19
—
B
Frame
Geared motor
B
AE ND
Geared motor
B
AE ND
Geared motor
Track wheelSide rollerSquare rail
AE
X
ND
F
Y
F
Y
F
Y
FrameTrack wheelTraveling rail(H-beam) Side roller
Ground parts(one side frame only)
FrameTrack wheelTraveling rail(H-beam)
Side roller Ground parts(one side frame only)
END CARRIAGE SPECIFICATIONS
Motorized Overhead Double Girder End Carriage Specifications Urethane Wheel Motorized Overhead Double Girder End Carriage Specifications
One motor drive type
Two motor drive type ( )
•W.L.L.: Working Load Limit (t).•Weights in parentheses are for high speed (H).*1: The size including the projection of the side roller plate.*2: The size with the standard speed (s) geared motor.•When planning a girder or cart, contact your nearest Kito distributor. •W.L.L.: Working Load Limit (t).
*1: Contact your nearest Kito distributor for sizes other than listed above.*2: Wheel pressure under the W.L.L. beneath the end carriage with standard girder and maximum span to verify the endurance of the structure.*3: In case of regular use of more than 80% of W.L.L. or frequent operation at a particular position, select an end carriage to make the wheel pressure the same as or less than the recommended wheel pressure.*4: The size including the projection of the side roller plate.*5: The size with the standard speed (s) geared motor.•When planning a girder or cart, contact your nearest Kito distributor.
20 21
15
21
27
15
21
27
15
21
27
15
21
27
15
21
27
15
21
27
Max.span(m)
Applicablesquare
rail(mm)
Max.wheel
pressure(kN)
Mass(kg/set)
Wheeldiameter
(mm)Type
Dimensions (mm)
L
10/12 20/24 30/36 20:5/24:6
SA B D E F N X Y
H SD
Traveling motor output (kWx2)50/60 Hz (m/min)
31.4
44.1
73.5
79.4
73.5
82.3
100
131
162
175
210
250
300
350
400
450
2615
2845
3395
2845
3095
3425
3098
3478
3098
3288
3698
4028
4528
2400
2630
3180
2630
2855
3185
2855
3235
2855
3045
3430
3760
4260
1995
2195
2140
2195
2390
2590
2395
2740
2395
2540
2840
3150
3500
124
128
134
138
150
23.5
27.5
325
375
444
445
529
530
531
143
162
189
224
274
324
274
324
328
408
382
449
504
449
554
736
686
799
686
828
1136
1448
1945
□50
□55·□60
□55·□60·□65
3
5
7.5
10
15
20
W.L.L.(t)
WEO030-15
WEO030-21
WEO030-27
WEO050-21
WEO050-21
WEO050-27
WEO075-15
WEO075-21
WEO075-27
WEO100-15
WEO100-21
WEO100-27
WEO100-15
WEO150-21
WEO150-27
WEO200-15
WEO200-21
WEO200-27
*2*1
15
21
27
15
21
27
15
21
27
15
21
27
15
21
27
27
15
15
21
21
27
27
Max.span(m)
Applicablesquare
rail(mm)
Max.wheel
pressure(kN)
Recommendedwheel
pressure(kN)
Mass(kg/set)
Wheeldiameter
(mm)Type
Dimensions (mm)
L
10/12 20/24 30/36 20:5/24:6
SA B D E F N Y
H SD
Traveling motor output (kWx2)50/60 Hz (m/min)
0.63/0.75
1.25/1.5
1.25/1.5x2
1.25/1.5
1.25/1.5x2
—
1.25/1.5x2
—
1.25/1.5x2
—
1.25/1.5x2
—
0.63/0.75
1.25/1.5
1.25/1.5x2
1.25/1.5
1.25/1.5x2
—
1.25/1.5x2
—
1.25/1.5x2
—
1.25/1.5x2
—
33.3
41.2
43.1
41.2
61.7
41.2
61.7
41.2
43.1
41.2
43.1
61.7
81.3
25.0
31.0
32.3
31.0
46.2
31.0
46.2
31.0
32.3
31.0
32.3
46.2
60.0
220
260
300
260
340
260x2
340
260x2
300x2
260x2
300x2
340x2
440x2
2851
3111
3211
3111
3091
3771
3091
3771
4059
3771
4059
4412
3992
4412
5172
5292
4742
4872
5172
5292
5422
5552
2539
2796
2896
2796
2776
3456
2776
3456
3701
3456
3701
4063
3643
4063
4823
4943
4393
4523
4823
4943
5073
5203
2085
2295
2140
2295
2230
2700
2230
2700
2900
2700
2900
3220
2790
3220
3800
3840
3380
3420
3800
3840
4070
4110
155
153
163
153
177
149
177
149
159
149
159
180
212
39
46
39
46
459
560
564
560
553
559
553
559
564
559
564
554
593
709
593
709
593
709
593
709
239
289
239
289
346
289
346
426
346
426
524
653
881
653
930
1160
930
1160
1438
1160
1438
1672
1378
1672
2575
2696
2214
2332
2575
2696
2944
3067
1.25/1.5
1.25/1.5x2
1.25/1.5
1.25/1.5x2
—
2.2x2
—
2.2x2
—
2.2x2
—
2.2x2
150·175·200
175·200
150·175·200
175·200
200·250
250·300
3
5
7.5
10
15
20
W.L.L.(t)
CWEO030-15
CWEO030-21
CWEO030-27
CWEO050-15
CWEO050-21
CWEO050-27
CWEO075-15
CWEO075-21
CWEO075-27
CWEO100-15
CWEO100-21
CWEO100-27
CWEO150-15
CWEO150-21
CWEO150-27
CWEO150-27H
CWEO200-15
CWEO200-15H
CWEO200-21
CWEO200-21H
CWEO200-27
CWEO200-27H
*5*4
*2*1 *3
(1588)
(2083)
0.21/0.25 0.21/0.25 0.34/0.4
0.63/0.750.34/0.4 0.34/0.4
0.63/0.75 0.63/0.75
1.25/1.5
1.25/1.5x21.25/1.5 1.25/1.5 -
0.21:0.053/0.25:0.063
0.63:0.16/0.75:0.19
0.34:0.084/0.4:0.1
0.63:0.16/0.75:0.19
—
B
Frame
Geared motor
B
AE ND
Geared motor
B
AE ND
Geared motor
Track wheelSide rollerSquare rail
AE
X
ND
F
Y
F
Y
F
Y
FrameTrack wheelTraveling rail(H-beam) Side roller
Ground parts(one side frame only)
FrameTrack wheelTraveling rail(H-beam)
Side roller Ground parts(one side frame only)
END CARRIAGE SPECIFICATIONS
Motorized Overhead Double Girder End Carriage Specifications Urethane Wheel Motorized Overhead Double Girder End Carriage Specifications
One motor drive type
Two motor drive type ( )
•W.L.L.: Working Load Limit (t).•Weights in parentheses are for high speed (H).*1: The size including the projection of the side roller plate.*2: The size with the standard speed (s) geared motor.•When planning a girder or cart, contact your nearest Kito distributor. •W.L.L.: Working Load Limit (t).
*1: Contact your nearest Kito distributor for sizes other than listed above.*2: Wheel pressure under the W.L.L. beneath the end carriage with standard girder and maximum span to verify the endurance of the structure.*3: In case of regular use of more than 80% of W.L.L. or frequent operation at a particular position, select an end carriage to make the wheel pressure the same as or less than the recommended wheel pressure.*4: The size including the projection of the side roller plate.*5: The size with the standard speed (s) geared motor.•When planning a girder or cart, contact your nearest Kito distributor.
22 23
6
9
12
15
6
9
12
15
6
9
12
15
6
9
12
15
Max.span(m)
Applicabletraveling
rail(mm)
Max.wheel
pressure(kN)
Mass(kg/set)
Wheeldiameter
(mm)Type
Dimensions (mm)
L
10/12 20/24 30/36 20:5/24:6
SA D M U N X Y
H SD
Traveling motor output (kWx2)50/60 Hz (m/min)
0.21/0.25
0.34/0.4
0.21/0.25
0.34/0.4
0.21/0.25
0.34/0.4
0.63/0.75
0.21/0.25
0.34/0.4
0.21/0.25
0.34/0.4
0.21/0.25
0.34/0.4
0.63/0.75
34
40
36
40
36
38
40
39
288+T/2
336+T/2
288+T/2
336+T/2
288+T/2
336+T/2
399+T/2
121
174
138
165
174
165
162
174
201
1
2
3
5
W.L.L.(t)
EL010- 6
EL010- 9
EL010-12
EL030-15
EL020- 6
EL020- 9
EL020-12
EL030-15
EL030- 6
EL030- 9
EL030-12
EL030-15
EL050- 6
EL050- 9
EL050-12
EL050-15
*1 *2
9
9
Max.span(m)
Applicabletraveling
rail(mm)
Max.wheel
pressure(kN)
Recommendedwheel
pressure(kN)
Mass(kg/set)
Wheeldiameter
(mm)Type
Dimensions (mm)
L
10/12 20/24 30/36 20:5/24:6
SA D M U N X Y
H SD
Traveling motor output (kWx2)50/60 Hz (m/min)
0.21/0.25
0.34/0.4
3.8
6.7
3.6
6.3
95
1251500 1060
T+171
T+211
34
35
T/2+288
T/2+336
241-T/2
281-T/2
121
165
143
231
0.21/0.25
0.34/0.4125·150
1
2
W.L.L.(t)
CEL010-9
CEL020-9
*4*3
*1 *2
95
140
110
140
110
125
140
155
4.51
15.7
9.31
15.7
9.31
10.5
15.7
17.6
75·100·125·150
125·150
100·125·150
125·150
100·125·150
125·150
132
150
164
340
152
172
202
340
160
234
340
270
432
241-T/2
281-T/2
290-T/2
1140
1500
1840
2200
1140
1500
1840
2200
1140
1840
2200
1500
2200
700
1060
1400
1760
700
1060
1400
1760
700
1400
1760
1060
1760
T+171
T+231
T+191
T+231
T+191
T+241
T+231
T+211
T+279
0.34/0.4(B)0.21/0.25(E,Z)
0.63/0.75(B,Z)0.34/0.4(E)
0.34/0.4(B)0.21/0.25(E,Z)
0.63/0.75(B,Z)0.34/0.4(E)0.34/0.4(B)
0.21/0.25(E,Z)
0.34/0.4
0.63/0.75(B,Z)0.34/0.4(E)
0.63/0.75
0.34/0.4(B)0.21/0.25(E,Z)
0.63/0.75
0.21:0.053/0.25:0.063
0.34:0.084/0.4:0.1
0.63/0.75(E)
0.21:0.053/0.25:0.063
0.34:0.084/0.4:0.1
0.21:0.053/0.25:0.063
0.34:0.084/0.4:0.1
0.21:0.053/0.25:0.063
0.34:0.084/0.4:0.1
0.63:0.16/0.75:0.19(E,Z)
AT
M
X
D
Geared motor
Y
U
Frame
Track wheel
Stay holder
Traveling rail(I-beam)
A
M
X
T
D
Geared motor
Y
U
Ground parts(one side frame only)
Frame
Track wheel
Stay holder
Traveling rail(I-beam)
END CARRIAGE SPECIFICATIONS
Motorized Low-head End Carriage Specifications Urethane Wheel Motorized Low-head End Carriage Specifications
•W.L.L.: Working Load Limit (t).*1: Wheel pressure under the W.L.L. beneath the end carriage with standard girder and maximum span to verify the endurance of the structure.*2: In case of regular use of more than 80% of W.L.L. or frequent operation at a particular position, select an end carriage to make the wheel pressure
the same as or less than the recommended wheel pressure.*3: The size including the projection of the side roller plate.*4: The size with the standard speed (s) geared motor.•To reinforce a connecting part of the rails with a plate on the rail web, make sure that the plate has a clearance for the end carriage. (Do not install the plate for 75 mm width rails or on the rail track.)
•Use I-beam for the traveling rail.•When planning a girder or cart, contact your nearest Kito distributor.•E: 200V/50Hz, 200-220V/60Hz•Z: 380-415V/50Hz, 440-460V/60Hz•B: 220V/50Hz, 208-230V/60Hz 380V/50Hz, 380-460V/60Hz
Track wheel and track wheel axle constructionWith respect to a low-head end carriage, both the track wheel and track wheel axle are designed for easy detaching, thus reducing installation and maintenance time.
End carriage frame
Tap
Track wheel assembly
Track wheel axle assembly
Bolt
Bolt
•W.L.L.: Working Load Limit (t).*1: The size with the standard speed (s) geared motor.*2: The height from the track surface of the traveling rail to the top of the end carriage.•To reinforce a connecting part of the rails with a plate on the rail web, make sure that the plate has a clearance for the end carriage. (Do not install the plate for 75 mm width rails or on the rail track.)•Use I-beam for the traveling rail.•When planning a girder or cart, contact your nearest Kito distributor.•E: 200V/50Hz, 200-220V/60Hz•Z: 380-415V/50Hz, 440-460V/60Hz•B: 220V/50Hz, 208-230V/60Hz 380V/50Hz, 380-460V/60Hz
22 23
6
9
12
15
6
9
12
15
6
9
12
15
6
9
12
15
Max.span(m)
Applicabletraveling
rail(mm)
Max.wheel
pressure(kN)
Mass(kg/set)
Wheeldiameter
(mm)Type
Dimensions (mm)
L
10/12 20/24 30/36 20:5/24:6
SA D M U N X Y
H SD
Traveling motor output (kWx2)50/60 Hz (m/min)
0.21/0.25
0.34/0.4
0.21/0.25
0.34/0.4
0.21/0.25
0.34/0.4
0.63/0.75
0.21/0.25
0.34/0.4
0.21/0.25
0.34/0.4
0.21/0.25
0.34/0.4
0.63/0.75
34
40
36
40
36
38
40
39
288+T/2
336+T/2
288+T/2
336+T/2
288+T/2
336+T/2
399+T/2
121
174
138
165
174
165
162
174
201
1
2
3
5
W.L.L.(t)
EL010- 6
EL010- 9
EL010-12
EL030-15
EL020- 6
EL020- 9
EL020-12
EL030-15
EL030- 6
EL030- 9
EL030-12
EL030-15
EL050- 6
EL050- 9
EL050-12
EL050-15
*1 *2
9
9
Max.span(m)
Applicabletraveling
rail(mm)
Max.wheel
pressure(kN)
Recommendedwheel
pressure(kN)
Mass(kg/set)
Wheeldiameter
(mm)Type
Dimensions (mm)
L
10/12 20/24 30/36 20:5/24:6
SA D M U N X Y
H SD
Traveling motor output (kWx2)50/60 Hz (m/min)
0.21/0.25
0.34/0.4
3.8
6.7
3.6
6.3
95
1251500 1060
T+171
T+211
34
35
T/2+288
T/2+336
241-T/2
281-T/2
121
165
143
231
0.21/0.25
0.34/0.4125·150
1
2
W.L.L.(t)
CEL010-9
CEL020-9
*4*3
*1 *2
95
140
110
140
110
125
140
155
4.51
15.7
9.31
15.7
9.31
10.5
15.7
17.6
75·100·125·150
125·150
100·125·150
125·150
100·125·150
125·150
132
150
164
340
152
172
202
340
160
234
340
270
432
241-T/2
281-T/2
290-T/2
1140
1500
1840
2200
1140
1500
1840
2200
1140
1840
2200
1500
2200
700
1060
1400
1760
700
1060
1400
1760
700
1400
1760
1060
1760
T+171
T+231
T+191
T+231
T+191
T+241
T+231
T+211
T+279
0.34/0.4(B)0.21/0.25(E,Z)
0.63/0.75(B,Z)0.34/0.4(E)
0.34/0.4(B)0.21/0.25(E,Z)
0.63/0.75(B,Z)0.34/0.4(E)0.34/0.4(B)
0.21/0.25(E,Z)
0.34/0.4
0.63/0.75(B,Z)0.34/0.4(E)
0.63/0.75
0.34/0.4(B)0.21/0.25(E,Z)
0.63/0.75
0.21:0.053/0.25:0.063
0.34:0.084/0.4:0.1
0.63/0.75(E)
0.21:0.053/0.25:0.063
0.34:0.084/0.4:0.1
0.21:0.053/0.25:0.063
0.34:0.084/0.4:0.1
0.21:0.053/0.25:0.063
0.34:0.084/0.4:0.1
0.63:0.16/0.75:0.19(E,Z)
AT
M
X
D
Geared motor
Y
U
Frame
Track wheel
Stay holder
Traveling rail(I-beam)
A
M
X
T
D
Geared motor
Y
U
Ground parts(one side frame only)
Frame
Track wheel
Stay holder
Traveling rail(I-beam)
END CARRIAGE SPECIFICATIONS
Motorized Low-head End Carriage Specifications Urethane Wheel Motorized Low-head End Carriage Specifications
•W.L.L.: Working Load Limit (t).*1: Wheel pressure under the W.L.L. beneath the end carriage with standard girder and maximum span to verify the endurance of the structure.*2: In case of regular use of more than 80% of W.L.L. or frequent operation at a particular position, select an end carriage to make the wheel pressure
the same as or less than the recommended wheel pressure.*3: The size including the projection of the side roller plate.*4: The size with the standard speed (s) geared motor.•To reinforce a connecting part of the rails with a plate on the rail web, make sure that the plate has a clearance for the end carriage. (Do not install the plate for 75 mm width rails or on the rail track.)
•Use I-beam for the traveling rail.•When planning a girder or cart, contact your nearest Kito distributor.•E: 200V/50Hz, 200-220V/60Hz•Z: 380-415V/50Hz, 440-460V/60Hz•B: 220V/50Hz, 208-230V/60Hz 380V/50Hz, 380-460V/60Hz
Track wheel and track wheel axle constructionWith respect to a low-head end carriage, both the track wheel and track wheel axle are designed for easy detaching, thus reducing installation and maintenance time.
End carriage frame
Tap
Track wheel assembly
Track wheel axle assembly
Bolt
Bolt
•W.L.L.: Working Load Limit (t).*1: The size with the standard speed (s) geared motor.*2: The height from the track surface of the traveling rail to the top of the end carriage.•To reinforce a connecting part of the rails with a plate on the rail web, make sure that the plate has a clearance for the end carriage. (Do not install the plate for 75 mm width rails or on the rail track.)•Use I-beam for the traveling rail.•When planning a girder or cart, contact your nearest Kito distributor.•E: 200V/50Hz, 200-220V/60Hz•Z: 380-415V/50Hz, 440-460V/60Hz•B: 220V/50Hz, 208-230V/60Hz 380V/50Hz, 380-460V/60Hz
24 25
9
12
9
12
9
12
9
12
Max.span(m)
Applicablesquare
rail(mm)
Max.wheel
pressure(kN)
Mass(kg/set)
Wheeldiameter
(mm)Type
Dimensions (mm)
9.31
17.6
20.6
44.1
99
130
156
224
□45·□50
□50
1
2
3
5
W.L.L.(t)
GO010- 9
GO010-12
GO020- 9
GO020-12
GO030-9
GO030-12
GO050-9
GO050-12
*2*1
95
125
140
210
A B
1400
D
900
E
100
120
135
119
J
247
252
257
F
15.5
18.5
1580
1590
H
507
509
521
561
X
119
123
143
Y
147
172
202
205
□32·□38□40·□45
6
12
6
12
6
12
6
12
Max.span(m)
Applicabletraveling
rail(mm)
Max.wheel
pressure(kN)
Mass(kg/set)
Wheeldiameter
(mm)Type
Dimensions (mm)
4.5
9.31
10.78
15.7
17.6
106
139
142
166
162
202
226
292
75·100·125·150
100·125·150
125·150
1
2
3
5
W.L.L.(t)
GL010- 6
GL010-12
GL020- 6
GL020-12
GL030- 6
GL030-12
GL050- 6
GL050-12
95
110
125
140
155
A
1390
1840
1480
1840
1480
1840
1480
1840
D
950
1400
1030
1400
880
1400
850
1400
H
490
715
530
715
531.3
599.2
539
579
J
T/2+228
T/2+221
T/2+222
T/2+225
T/2+234
J
241-T/2
281-T/2
315-T/2
M
T+171
T+211
T+191
T+201
T+221
T+231
T+211
T+249
U
34
36
38
40
39
*1Y
121
138
145
165
177
174
188
3
6
6
Max.span(m)
Applicabletraveling
rail(mm)
Max.wheel
pressure(kN)
Mass(kg/set)
Wheeldiameter
(mm)Type
Dimensions (mm)
1.76
3.5
27
45
75·100
75·100·125
0.5
1
W.L.L.(t)
PL005-3
PL010-6
PL010-6
71
85
A
470
830
B
—
D
350
700
X
206-T/2
M
T+157
T+161
U
25
31
*Y
89
106
9
9
Max.span(m)
Applicabletraveling
rail(mm)
Max.wheel
pressure(kN)
Mass(kg/set)
Wheeldiameter
(mm)Type
Dimensions (mm)
3.92 7175·100·1250.5
1
W.L.L.(t)
PL010-9
PL010-995
A
1150
B
1050
D
650
X
212-T/2
M
T+174
U
26
*Y
95
A
BAD
A
Y
U
Y
U
MX
MX
T
T
D
ABD
FH
E J
DAD
H H
TT
M MX J X J
Y
UY
U
Frame FrameTrack wheel
Track wheel
Hand wheelHand wheel
Traveling rail
Traveling rail
Traveling rail
Track wheel Frame
Frame
Track wheelSide roller
Traveling rail
Stay holderStay holder
Y
Square rail Hand wheel Frame
Connecting plate
Connecting plate
Track wheel Side rollerX
END CARRIAGE SPECIFICATIONS
Geared Overhead End Carriage Specifications
Geared Low-head End Carriage Specifications
Plain Low-head End Carriage SpecificationsNo side rollers for 0.5 t (max. span 6 m) and 1 t (max. span 6 m)
Plain Low-head End Carriage SpecificationsSide rollers for 0.5 t and 1 t (max. span 6 m)
1 to 2 t 3 to 5 t
•W.L.L.: Working Load Limit (t).*1: The size including the projection of the side roller plate.*2: The height from the track surface of the traveling rail to the top of the end carriage.•When planning a girder or cart, contact your nearest Kito distributor.
•W.L.L.: Working Load Limit (t).*1: The height from the track surface of the traveling rail to the top of the end carriage.•To reinforce a connecting part of the rails with a plate on the rail web, make sure that the plate has a clearance for the end carriage. (Do not install the plate for 75 mm width rails or on the rail track.)•Use I-beam for the traveling rail.•When planning a girder or cart, contact your nearest Kito distributor.
•W.L.L.: Working Load Limit (t).*: The hieght from the track surface of the traveling rail to the top of the end carriage.•To reinforce a connecting part of the rails with a plate on the rail web, make sure that the plate has a clearance for the end carriage. (Do not install the plate for 75 mm width rails or on the rail track.)•Use I-beam for the traveling rail except the size, 100 x 75 x 5.•When planning a girder or cart, contact your nearest Kito distributor.
•W.L.L.: Working Load Limit (t).*: The hieght from the track surface of the traveling rail to the top of the end carriage.•To reinforce a connecting part of the rails with a plate on the rail web, make sure that the plate has a clearance for the end carriage. (Do not install the plate for 75 mm width rails or on the rail track.)•Use I-beam for the traveling rail except the size, 100 x 75 x 5.•When planning a girder or cart, contact your nearest Kito distributor.
24 25
9
12
9
12
9
12
9
12
Max.span(m)
Applicablesquare
rail(mm)
Max.wheel
pressure(kN)
Mass(kg/set)
Wheeldiameter
(mm)Type
Dimensions (mm)
9.31
17.6
20.6
44.1
99
130
156
224
□45·□50
□50
1
2
3
5
W.L.L.(t)
GO010- 9
GO010-12
GO020- 9
GO020-12
GO030-9
GO030-12
GO050-9
GO050-12
*2*1
95
125
140
210
A B
1400
D
900
E
100
120
135
119
J
247
252
257
F
15.5
18.5
1580
1590
H
507
509
521
561
X
119
123
143
Y
147
172
202
205
□32·□38□40·□45
6
12
6
12
6
12
6
12
Max.span(m)
Applicabletraveling
rail(mm)
Max.wheel
pressure(kN)
Mass(kg/set)
Wheeldiameter
(mm)Type
Dimensions (mm)
4.5
9.31
10.78
15.7
17.6
106
139
142
166
162
202
226
292
75·100·125·150
100·125·150
125·150
1
2
3
5
W.L.L.(t)
GL010- 6
GL010-12
GL020- 6
GL020-12
GL030- 6
GL030-12
GL050- 6
GL050-12
95
110
125
140
155
A
1390
1840
1480
1840
1480
1840
1480
1840
D
950
1400
1030
1400
880
1400
850
1400
H
490
715
530
715
531.3
599.2
539
579
J
T/2+228
T/2+221
T/2+222
T/2+225
T/2+234
J
241-T/2
281-T/2
315-T/2
M
T+171
T+211
T+191
T+201
T+221
T+231
T+211
T+249
U
34
36
38
40
39
*1Y
121
138
145
165
177
174
188
3
6
6
Max.span(m)
Applicabletraveling
rail(mm)
Max.wheel
pressure(kN)
Mass(kg/set)
Wheeldiameter
(mm)Type
Dimensions (mm)
1.76
3.5
27
45
75·100
75·100·125
0.5
1
W.L.L.(t)
PL005-3
PL010-6
PL010-6
71
85
A
470
830
B
—
D
350
700
X
206-T/2
M
T+157
T+161
U
25
31
*Y
89
106
9
9
Max.span(m)
Applicabletraveling
rail(mm)
Max.wheel
pressure(kN)
Mass(kg/set)
Wheeldiameter
(mm)Type
Dimensions (mm)
3.92 7175·100·1250.5
1
W.L.L.(t)
PL010-9
PL010-995
A
1150
B
1050
D
650
X
212-T/2
M
T+174
U
26
*Y
95
A
BAD
A
Y
U
Y
U
MX
MX
T
T
D
ABD
FH
E J
DAD
H H
TT
M MX J X J
Y
UY
U
Frame FrameTrack wheel
Track wheel
Hand wheelHand wheel
Traveling rail
Traveling rail
Traveling rail
Track wheel Frame
Frame
Track wheelSide roller
Traveling rail
Stay holderStay holder
Y
Square rail Hand wheel Frame
Connecting plate
Connecting plate
Track wheel Side rollerX
END CARRIAGE SPECIFICATIONS
Geared Overhead End Carriage Specifications
Geared Low-head End Carriage Specifications
Plain Low-head End Carriage SpecificationsNo side rollers for 0.5 t (max. span 6 m) and 1 t (max. span 6 m)
Plain Low-head End Carriage SpecificationsSide rollers for 0.5 t and 1 t (max. span 6 m)
1 to 2 t 3 to 5 t
•W.L.L.: Working Load Limit (t).*1: The size including the projection of the side roller plate.*2: The height from the track surface of the traveling rail to the top of the end carriage.•When planning a girder or cart, contact your nearest Kito distributor.
•W.L.L.: Working Load Limit (t).*1: The height from the track surface of the traveling rail to the top of the end carriage.•To reinforce a connecting part of the rails with a plate on the rail web, make sure that the plate has a clearance for the end carriage. (Do not install the plate for 75 mm width rails or on the rail track.)•Use I-beam for the traveling rail.•When planning a girder or cart, contact your nearest Kito distributor.
•W.L.L.: Working Load Limit (t).*: The hieght from the track surface of the traveling rail to the top of the end carriage.•To reinforce a connecting part of the rails with a plate on the rail web, make sure that the plate has a clearance for the end carriage. (Do not install the plate for 75 mm width rails or on the rail track.)•Use I-beam for the traveling rail except the size, 100 x 75 x 5.•When planning a girder or cart, contact your nearest Kito distributor.
•W.L.L.: Working Load Limit (t).*: The hieght from the track surface of the traveling rail to the top of the end carriage.•To reinforce a connecting part of the rails with a plate on the rail web, make sure that the plate has a clearance for the end carriage. (Do not install the plate for 75 mm width rails or on the rail track.)•Use I-beam for the traveling rail except the size, 100 x 75 x 5.•When planning a girder or cart, contact your nearest Kito distributor.
b e
*f
*yh
g
c
øi
øi
n-øz
n-øz
a d
b c ea d
*f
*yh
g
Pinion *Flange thickness of the Geared motor at the fixing holes (n-øz) are 18 mm.
*f and y show distances from pinion center to both ends.
*Flange thickness of the Geared motor at the fixing holes (n-øz) are 17 mm.
*f and y show distances from pinion center to both ends.
Pinion
Adjusting bolt
Lock nut
Spring holder
Brake spring
26 27
Power source
Motor output(kW) Mass
(kg/set)Overhead Low-headOverhead50 Hz 60 Hz
Motor output(kW)
50 Hz 60 Hz
Low-head
Type PolePower source
Dimensions (mm)
G1M□025L-□G1M□025S-□G1M□025H-□
G1M□025SD-□
G1M□040T-□G1M□040L-□G1M□040S-□G1M□040H-□G1M□040SD-□G1M□075T-□
0.21
0.21:0.053
0.34
0.34:0.084
0.63
0.25
0.25:0.063
0.4
0.4:0.1
0.75
4
2/8
4
2/8
4
B,E,Z
E
B,E,Z
E
B,E,Z
B,E,Z
E,Z
B,E,Z
E
B,E,Z
E,Z
E
B,E,Z
E
E,Z
—
B,E,Z
E,Z
B,E,Z
E
B,E,Z
290
324
339
300
335
346
281
315
291
330
341
34
25
29
142
156
146
161
193
215
67
82.2
67
70.6
72
75.2
78
92.6
78
60
70
57
66
4 9
11
17.5
19
15.5
15
14
15
16.5
17
56
74
0
0
-0.046
-0.046
256
290
305
266
301
312
a
Overhead Low-head
cd e f y g h øi n øzb
Motor output(kW)Type
*Travelingspeed (m/min)
*Motorrevolutions
(r.p.m)*Revolutions
(r.p.m)
Pinion
Tooth surface strength (kg)
G1M□025L-□G1M□025S-□G1M□025H-□G1M□040T-□
G1M□025SD-□
G1M□040L-□G1M□040S-□G1M□040H-□G1M□075T-□
G1M□040SD-□
G1M□075L-□G1M□075S-□G1M□075H-□G1M□150T-□
G1M□075SD-□
G1MO150L-□G1MO150S-□G1MO150H-□
0.21
0.34
0.053
0.21
0.34
0.63
0.084
0.34
0.63
1.25
0.16
0.63
1.25
0.25
0.4
0.063
0.25
0.4
0.75
0.1
0.4
0.75
1.5
0.19
0.75
1.5
10
20
30
5
20
10
20
30
5
20
10
20
30
5
20
10
20
30
12
24
36
6
24
12
24
36
6
24
12
24
36
6
24
12
24
36
1410
1430
730
2960
1430
1415
730
2890
1415
1440
720
2890
1440
1650
1700
870
3530
1700
1670
860
3420
1670
1700
860
3440
1700
155
314
463
469
80
325
132
255
382
378
68
266
77
146
224
218
39
157
65
127
192
181
367
541
557
91
387
156
302
453
445
79
314
91
173
253
256
47
187
77
149
227
158
78
53
83
77
75
247
128
86
162
121
123
527
278
182
372
263
259
1022
522
345
134
66
45
70
67
63
208
107
72
137
103
446
235
160
317
219
217
862
446
292
105
52
35
59
51
50
165
85
57
108
81
82
323
158
104—
161
159
—
90
44
30
47
45
42
139
72
48
92
68
69
255
134
92—
125
124
—
Overhead Low-head
50 Hz 60 Hz50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz
Motor output(kW)
50/60HzType Pole
Module Numberof teeth x Outside
diameter
Pinion (mm)
G1MO025□-□
G1MO025□-□
G1MO040T-□G1ML040T-□G1MO040□-□
G1ML040□-□
G1MO075T-□G1ML075T-□G1MO075□-□
G1ML075□-□
G1MO150T-□
0.21/0.25
0.21:0.053/0.25:0.063
0.34/0.4
0.34/0.4
0.34:0.084/0.4:0.1
0.63/0.75
0.63/0.75
0.63:0.16/0.75:0.19
1.25/1.5
4
2/8
4
4
2/8
4
4
2/8
4
2.5
3
4.5
3
4.5
8
12
8
12
8
12
8
12
8
21
8
0.452
0.294
0.452
0.294
0.460
0.294
0.460
0.294
0.550
-0.04
0.550
Mass(kg/set)
OverheadOverhead Low-headLow-head
Type Pole
Dimensions (mm)
G1M□075L-□G1M□075S-□G1M□075H-□
G1M□075SD-□
G1MO150T-□G1MO150L-□G1MO150S-□G1MO150H-□
0.63
0.63:0.16
1.25
0.75
0.75:0.19
1.5
4
2/8
4
400
415
433
484
393
426
—
45
65
38
—
156
190
154
177
210
242
122.6
132.6
90
110
70
80
4
11
13
26
27
30
36
45
90
115
27.1
36.5
27.1
36.5
32.8
43.8
32.8
43.8
50
68.8
50
0
0
0
0
0
0
0
0
0
0
0
-0.1
-0.2
-0.1
-0.2
-0.2
-0.2
-0.2
-0.2
-0.2
-0.2
-0.2
355
370
388
419
a
Overhead Low-head
cd e f y g h øi n øzb
0-0.054
0-0.054
GEARED MOTOR SPECIFICATIONS■ Dimensions ■ Specifications of Geared Motor Pinions
■ Details of Pinions
■ Brake Torque AdjustmentTorque can be adjusted within a range of 30 to 80% for a 0.25 kW motor and 0 to 50% for motors exceeding 0.4 kW of the rated torque by loosening the lock nut and setting the height of the adjusting bolt. Be sure to tighten the nut and fix the bolt after adjustment. Adjustment is the set-less type.
*Figures in the table are approximate values.
•Heat treatment: Case hardened HRC: 57 to 63.•X: Addendum modification coefficient.
•Brake: DC Disk Brake. •Brake Torque: From 0 to 50% of motor rated Torque. •Dust and water protection: IP55 (Specified by I.E.C.)
•Brake: DC Disk Brake. •Brake Torque: From 0 to 50% (for 0.25 kW:30 to 80%) of motor rated Torque. •Dust and water protection: IP55 (Specified by I.E.C.)
G1MO025 L-E---------- --- -------- --- ---
Types of geared motors
O: Overhead L: Low-head Types of end carriages
L: 10/12 m/mim (Low speed)S: 20/24 m/mim (Standard speed)
SD: 20/5 24/6 m/mim (Dual speed)H: 30/36 m/mim (High speed)
Speed (50/60Hz)
E: 200 V 50 Hz, 200-220 V 60 HzZ: 380-415 V 50 Hz, 440-460 V 60 HzB: 220 V 50 Hz, 208-230 V 60 Hz
380 V 50 Hz, 380-460 V 60 Hz
E: 200 V 50 Hz, 200-220 V 60 HzZ: 380-415 V 50 Hz, 440-460 V 60 HzB: 220 V 50 Hz, 208-230 V 60 Hz
380 V 50 Hz, 380-460 V 60 HzPower sources
025: 0.21/0.25 kW040: 0.34/0.4 kW075: 0.63/0.75 kW150: 1.25/1.5 kW
Motor outputs (50/60Hz)
G1MO040 T-E---------- --- -------- --- ---
Types of geared motors
O: Overhead L: Low-head Types of end carriages
T: 30/36 m/mim (High speed)Speed (50/60Hz)
Power sources
040: (0.25)+0.34/0.4075: (0.4)+0.63/0.75150: (0.75)+1.25/1.5
Motor outputs
How to read types (example)
b e
*f
*yh
g
c
øi
øi
n-øz
n-øz
a d
b c ea d
*f
*yh
g
Pinion *Flange thickness of the Geared motor at the fixing holes (n-øz) are 18 mm.
*f and y show distances from pinion center to both ends.
*Flange thickness of the Geared motor at the fixing holes (n-øz) are 17 mm.
*f and y show distances from pinion center to both ends.
Pinion
Adjusting bolt
Lock nut
Spring holder
Brake spring
26 27
Power source
Motor output(kW) Mass
(kg/set)Overhead Low-headOverhead50 Hz 60 Hz
Motor output(kW)
50 Hz 60 Hz
Low-head
Type PolePower source
Dimensions (mm)
G1M□025L-□G1M□025S-□G1M□025H-□
G1M□025SD-□
G1M□040T-□G1M□040L-□G1M□040S-□G1M□040H-□G1M□040SD-□G1M□075T-□
0.21
0.21:0.053
0.34
0.34:0.084
0.63
0.25
0.25:0.063
0.4
0.4:0.1
0.75
4
2/8
4
2/8
4
B,E,Z
E
B,E,Z
E
B,E,Z
B,E,Z
E,Z
B,E,Z
E
B,E,Z
E,Z
E
B,E,Z
E
E,Z
—
B,E,Z
E,Z
B,E,Z
E
B,E,Z
290
324
339
300
335
346
281
315
291
330
341
34
25
29
142
156
146
161
193
215
67
82.2
67
70.6
72
75.2
78
92.6
78
60
70
57
66
4 9
11
17.5
19
15.5
15
14
15
16.5
17
56
74
0
0
-0.046
-0.046
256
290
305
266
301
312
a
Overhead Low-head
cd e f y g h øi n øzb
Motor output(kW)Type
*Travelingspeed (m/min)
*Motorrevolutions
(r.p.m)*Revolutions
(r.p.m)
Pinion
Tooth surface strength (kg)
G1M□025L-□G1M□025S-□G1M□025H-□G1M□040T-□
G1M□025SD-□
G1M□040L-□G1M□040S-□G1M□040H-□G1M□075T-□
G1M□040SD-□
G1M□075L-□G1M□075S-□G1M□075H-□G1M□150T-□
G1M□075SD-□
G1MO150L-□G1MO150S-□G1MO150H-□
0.21
0.34
0.053
0.21
0.34
0.63
0.084
0.34
0.63
1.25
0.16
0.63
1.25
0.25
0.4
0.063
0.25
0.4
0.75
0.1
0.4
0.75
1.5
0.19
0.75
1.5
10
20
30
5
20
10
20
30
5
20
10
20
30
5
20
10
20
30
12
24
36
6
24
12
24
36
6
24
12
24
36
6
24
12
24
36
1410
1430
730
2960
1430
1415
730
2890
1415
1440
720
2890
1440
1650
1700
870
3530
1700
1670
860
3420
1670
1700
860
3440
1700
155
314
463
469
80
325
132
255
382
378
68
266
77
146
224
218
39
157
65
127
192
181
367
541
557
91
387
156
302
453
445
79
314
91
173
253
256
47
187
77
149
227
158
78
53
83
77
75
247
128
86
162
121
123
527
278
182
372
263
259
1022
522
345
134
66
45
70
67
63
208
107
72
137
103
446
235
160
317
219
217
862
446
292
105
52
35
59
51
50
165
85
57
108
81
82
323
158
104—
161
159
—
90
44
30
47
45
42
139
72
48
92
68
69
255
134
92—
125
124
—
Overhead Low-head
50 Hz 60 Hz50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz
Motor output(kW)
50/60HzType Pole
Module Numberof teeth x Outside
diameter
Pinion (mm)
G1MO025□-□
G1MO025□-□
G1MO040T-□G1ML040T-□G1MO040□-□
G1ML040□-□
G1MO075T-□G1ML075T-□G1MO075□-□
G1ML075□-□
G1MO150T-□
0.21/0.25
0.21:0.053/0.25:0.063
0.34/0.4
0.34/0.4
0.34:0.084/0.4:0.1
0.63/0.75
0.63/0.75
0.63:0.16/0.75:0.19
1.25/1.5
4
2/8
4
4
2/8
4
4
2/8
4
2.5
3
4.5
3
4.5
8
12
8
12
8
12
8
12
8
21
8
0.452
0.294
0.452
0.294
0.460
0.294
0.460
0.294
0.550
-0.04
0.550
Mass(kg/set)
OverheadOverhead Low-headLow-head
Type Pole
Dimensions (mm)
G1M□075L-□G1M□075S-□G1M□075H-□
G1M□075SD-□
G1MO150T-□G1MO150L-□G1MO150S-□G1MO150H-□
0.63
0.63:0.16
1.25
0.75
0.75:0.19
1.5
4
2/8
4
400
415
433
484
393
426
—
45
65
38
—
156
190
154
177
210
242
122.6
132.6
90
110
70
80
4
11
13
26
27
30
36
45
90
115
27.1
36.5
27.1
36.5
32.8
43.8
32.8
43.8
50
68.8
50
0
0
0
0
0
0
0
0
0
0
0
-0.1
-0.2
-0.1
-0.2
-0.2
-0.2
-0.2
-0.2
-0.2
-0.2
-0.2
355
370
388
419
a
Overhead Low-head
cd e f y g h øi n øzb
0-0.054
0-0.054
GEARED MOTOR SPECIFICATIONS■ Dimensions ■ Specifications of Geared Motor Pinions
■ Details of Pinions
■ Brake Torque AdjustmentTorque can be adjusted within a range of 30 to 80% for a 0.25 kW motor and 0 to 50% for motors exceeding 0.4 kW of the rated torque by loosening the lock nut and setting the height of the adjusting bolt. Be sure to tighten the nut and fix the bolt after adjustment. Adjustment is the set-less type.
*Figures in the table are approximate values.
•Heat treatment: Case hardened HRC: 57 to 63.•X: Addendum modification coefficient.
•Brake: DC Disk Brake. •Brake Torque: From 0 to 50% of motor rated Torque. •Dust and water protection: IP55 (Specified by I.E.C.)
•Brake: DC Disk Brake. •Brake Torque: From 0 to 50% (for 0.25 kW:30 to 80%) of motor rated Torque. •Dust and water protection: IP55 (Specified by I.E.C.)
G1MO025 L-E---------- --- -------- --- ---
Types of geared motors
O: Overhead L: Low-head Types of end carriages
L: 10/12 m/mim (Low speed)S: 20/24 m/mim (Standard speed)
SD: 20/5 24/6 m/mim (Dual speed)H: 30/36 m/mim (High speed)
Speed (50/60Hz)
E: 200 V 50 Hz, 200-220 V 60 HzZ: 380-415 V 50 Hz, 440-460 V 60 HzB: 220 V 50 Hz, 208-230 V 60 Hz
380 V 50 Hz, 380-460 V 60 Hz
E: 200 V 50 Hz, 200-220 V 60 HzZ: 380-415 V 50 Hz, 440-460 V 60 HzB: 220 V 50 Hz, 208-230 V 60 Hz
380 V 50 Hz, 380-460 V 60 HzPower sources
025: 0.21/0.25 kW040: 0.34/0.4 kW075: 0.63/0.75 kW150: 1.25/1.5 kW
Motor outputs (50/60Hz)
G1MO040 T-E---------- --- -------- --- ---
Types of geared motors
O: Overhead L: Low-head Types of end carriages
T: 30/36 m/mim (High speed)Speed (50/60Hz)
Power sources
040: (0.25)+0.34/0.4075: (0.4)+0.63/0.75150: (0.75)+1.25/1.5
Motor outputs
How to read types (example)
28 29
Single speedDual speed
KITO CRANES can be fitted with peripheral equipmentfor greater durability, higher performance and greater operational efficiency.
CRANE PERIPHERAL EQUIPMENT INSTALLATION OUTLINE
SOFTRUN device
Traveling power supply
Control box
Traveling power supply
Control Boxes
Emergency Stop Device
SOFTRUN Device (option)
For an electric chain hoist with an emergency stop device.
For an electric chain hoist
For a rope hoistwith an emergency stop device.
For a rope hoistwith an emergency stop device.
For a rope hoist
(option)
28 29
Single speedDual speed
KITO CRANES can be fitted with peripheral equipmentfor greater durability, higher performance and greater operational efficiency.
CRANE PERIPHERAL EQUIPMENT INSTALLATION OUTLINE
SOFTRUN device
Traveling power supply
Control box
Traveling power supply
Control Boxes
Emergency Stop Device
SOFTRUN Device (option)
For an electric chain hoist with an emergency stop device.
For an electric chain hoist
For a rope hoistwith an emergency stop device.
For a rope hoistwith an emergency stop device.
For a rope hoist
(option)
30 31
Type
Dua
l spe
edS
ingl
e sp
eed
Single speedDual speed
Fig.BFig.A
Sin
gle
spee
d*D
ual s
peed
Outline
Power supply
Rated voltageWorkingvoltagerange
TravelingControlbox H B L
Rated current Dimensions (mm)Gearedmotoroutput
Pendantcontrolvoltage
Mass(kg/set)
SBE015SN
SBE015SNZ
SBE030SN
SBE015SDN
SBE015SDNZ
SBE030SDN
±10%
±10%
40A
38A
70A
40A
38A
70A
256
300
300
128
133
133
348
470
470
7
9
11
~0.75kWx2
~1.5kWx2
~0.75kWx2
~1.5kWx2
11A
7A
16A
11A
7.5A
16A
24~26.4V
24~26.4V
Fig.A
Fig.A
200V 50Hz
200~220V 60Hz
380~415V 50Hz
440V 60Hz
200V 50Hz
200~220V 60Hz
200V 50Hz
200~220V 60Hz
380~415V 50Hz
440V 60Hz
200V 50Hz
200~220V 60Hz
Type
Power supply
Rated voltageWorkingvoltagerange
TravelingControlbox H B L
Rated current Dimensions (mm)Emergency
stopdevice
Gearedmotoroutput
Pendantcontrolvoltage
Mass(kg/set)
SBH008S-HSBH008S-XSBH008SN-HSBH008SN-XSBH015S-HSBH015S-XSBH015SN-HSBH015SN-XSBH030S-HSBH030S-XSBH008SD-HSBH008SD-XSBH008SDN-HSBH008SDN-XSBH015SD-HSBH015SD-XSBH015SDN-HSBH015SDN-XSBH030SD-HSBH030SD-X
Without
With
Without
With
Without
Without
With
Without
With
Without
±10%
±10%
±10%
±10%
±10%
±10%
50 A
70 A
100 A
—
256
300
256
300
300
—
128
158
128
158
133
—
348
440
348
440
390
—
7
8
7
9
8
—
0.25 kWx20.4 kWx2
0.75 kWx2
1.5 kWx2
0.25 kWx20.4 kWx2
0.75 kWx2
1.5 kWx2
11 A7 A11 A7 A11 A7 A11 A7 A20 A10 A
—
220 V48 V
220 V48 V
220 V48 V
220 V48 V
220 V48 V
220 V48 V
220 V48 V
220 V48 V
220 V48 V
220 V48 V
220 V 60 Hz380,415 V 50 Hz220 V 60 Hz380,415 V 50 Hz220 V 60 Hz380,415 V 50 Hz220 V 60 Hz380,415 V 50 Hz220 V 60 Hz380,415 V 50 Hz220 V 60 Hz380,415 V 50 Hz22 V 60 Hz380,415 V 50 Hz220 V 60 Hz380,415 V 50 Hz220 V 60 Hz380,415 V 50 Hz220 V 60 Hz380,415 V 50 Hz
Sing
le sp
eed
Type
Power supply
Rated voltageWorkingvoltagerange
TravelingControlbox
Rated currentEmergency
stopdevice
Gearedmotoroutput
Pendantcontrolvoltage
Mass(kg/set)
SBH008S-H
SBH008S-XWith ±10% 100 A 171.5 kWx2
20 A
10 A
220 V
48 V
220 V 60 Hz 380,415 V 50 Hz
CONTROL BOXES
For electric chain hoist(ER2M)
For wire rope hoist
This control box includes a built-inelectromagnetic contactor and atransformer with control voltageof 24V. Other control voltages areavailable as an option. All modelsare equipped with an emergencystop device as standard.
This control box contains a built-in electromagnetic contactor for control-ling travel. Two series (with and without emergency a stop device) are available with a built-in electro-magnetic contactor.
With an emergency stop device *With an emergency stop device
With an emergency stop device
*Available on request.•Environment: Ambient temperature: -10 to 40 ˚C (No freezing) Installation site: Indoor, free of dust and corrosive gases.•Dust and water protection: IP20 (Specified by I.E.C.)•Color: Munsell 6YR6/14
•Environment: Ambient temperature: -10 to 40 ˚C (No freezing) Installation site: Indoor, free of dust and corrosive gases.•Dust and water protection: IP20 (Specified by I.E.C.)•Color: Munsell 6YR6/14
•Available on your request.•Environment: Ambient temperature: -20 to 40˚C (No freezing) Installation site: Indoor, free of dust and corrosive gases.•Protection class : IP20•Color: Munsell 6YR6/14
CONTROL BOX
CONTROL BOX
H
Film coveredgrommet
Film covered grommet
L B
40
*10353
50
50
40
4033
90
1521764-ø12
404040
80
90
150
200
40080
500
LL B
H
B
H
5090
152176
30 31
Type
Dua
l spe
edS
ingl
e sp
eed
Single speedDual speed
Fig.BFig.A
Sin
gle
spee
d*D
ual s
peed
Outline
Power supply
Rated voltageWorkingvoltagerange
TravelingControlbox H B L
Rated current Dimensions (mm)Gearedmotoroutput
Pendantcontrolvoltage
Mass(kg/set)
SBE015SN
SBE015SNZ
SBE030SN
SBE015SDN
SBE015SDNZ
SBE030SDN
±10%
±10%
40A
38A
70A
40A
38A
70A
256
300
300
128
133
133
348
470
470
7
9
11
~0.75kWx2
~1.5kWx2
~0.75kWx2
~1.5kWx2
11A
7A
16A
11A
7.5A
16A
24~26.4V
24~26.4V
Fig.A
Fig.A
200V 50Hz
200~220V 60Hz
380~415V 50Hz
440V 60Hz
200V 50Hz
200~220V 60Hz
200V 50Hz
200~220V 60Hz
380~415V 50Hz
440V 60Hz
200V 50Hz
200~220V 60Hz
Type
Power supply
Rated voltageWorkingvoltagerange
TravelingControlbox H B L
Rated current Dimensions (mm)Emergency
stopdevice
Gearedmotoroutput
Pendantcontrolvoltage
Mass(kg/set)
SBH008S-HSBH008S-XSBH008SN-HSBH008SN-XSBH015S-HSBH015S-XSBH015SN-HSBH015SN-XSBH030S-HSBH030S-XSBH008SD-HSBH008SD-XSBH008SDN-HSBH008SDN-XSBH015SD-HSBH015SD-XSBH015SDN-HSBH015SDN-XSBH030SD-HSBH030SD-X
Without
With
Without
With
Without
Without
With
Without
With
Without
±10%
±10%
±10%
±10%
±10%
±10%
50 A
70 A
100 A
—
256
300
256
300
300
—
128
158
128
158
133
—
348
440
348
440
390
—
7
8
7
9
8
—
0.25 kWx20.4 kWx2
0.75 kWx2
1.5 kWx2
0.25 kWx20.4 kWx2
0.75 kWx2
1.5 kWx2
11 A7 A11 A7 A11 A7 A11 A7 A20 A10 A
—
220 V48 V220 V48 V220 V48 V220 V48 V220 V48 V220 V48 V220 V48 V220 V48 V220 V48 V220 V48 V
220 V 60 Hz380,415 V 50 Hz220 V 60 Hz380,415 V 50 Hz220 V 60 Hz380,415 V 50 Hz220 V 60 Hz380,415 V 50 Hz220 V 60 Hz380,415 V 50 Hz220 V 60 Hz380,415 V 50 Hz22 V 60 Hz380,415 V 50 Hz220 V 60 Hz380,415 V 50 Hz220 V 60 Hz380,415 V 50 Hz220 V 60 Hz380,415 V 50 Hz
Sing
le sp
eed
Type
Power supply
Rated voltageWorkingvoltagerange
TravelingControlbox
Rated currentEmergency
stopdevice
Gearedmotoroutput
Pendantcontrolvoltage
Mass(kg/set)
SBH008S-H
SBH008S-XWith ±10% 100 A 171.5 kWx2
20 A
10 A
220 V
48 V
220 V 60 Hz 380,415 V 50 Hz
CONTROL BOXES
For electric chain hoist(ER2M)
For wire rope hoist
This control box includes a built-inelectromagnetic contactor and atransformer with control voltageof 24V. Other control voltages areavailable as an option. All modelsare equipped with an emergencystop device as standard.
This control box contains a built-in electromagnetic contactor for control-ling travel. Two series (with and without emergency a stop device) are available with a built-in electro-magnetic contactor.
With an emergency stop device *With an emergency stop device
With an emergency stop device
*Available on request.•Environment: Ambient temperature: -10 to 40 ˚C (No freezing) Installation site: Indoor, free of dust and corrosive gases.•Dust and water protection: IP20 (Specified by I.E.C.)•Color: Munsell 6YR6/14
•Environment: Ambient temperature: -10 to 40 ˚C (No freezing) Installation site: Indoor, free of dust and corrosive gases.•Dust and water protection: IP20 (Specified by I.E.C.)•Color: Munsell 6YR6/14
•Available on your request.•Environment: Ambient temperature: -20 to 40˚C (No freezing) Installation site: Indoor, free of dust and corrosive gases.•Protection class : IP20•Color: Munsell 6YR6/14
CONTROL BOX
CONTROL BOX
H
Film coveredgrommet
Film covered grommet
L B
40
*10353
50
50
40
4033
90
1521764-ø12
404040
80
90
150
200
40080
500
LL B
H
B
H
5090
152176
32 33
Type
Wiresxcross-sectional
area4Cx2□ 4Cx3.5□ 6Cx2□ 8Cx2□ 4Cx5.5□ 4Cx8□ 4Cx14□ 4Cx22□ 4Cx30□
Cablediameter
Part No.
Type
Power supply
Rated voltage
Workingvoltagerange
A B C D E F G H I1 I2
Dimensions (mm)Ratedcurrent
Timerrange
Gearedmotoroutput
Torquesettingrange
Mass(kg/set)
SR150S-S
SR150S-Y
SR150S-A
SR300S-S
SR300S-Y
SR300S-A
SR300S-SX2
SR300S-SY2
SR300S-SA2
7.5 A
15 A
0.25 kWx20.4 kWx20.75 kWx2
1.5 kWx2
1.5 kWx4
0 to 10 1 to 5 sec ±10%
200 V
400 V
500 V
200 V
400 V
500 V
200 V
400 V
500 V
152 330 90 147 299 75 310 30 45 35
2.5
3
ø12.3
CTC4C x 2
3Cx2□
ø11
CTC3C x 2
ø14.2
*ø17.0to ø19.0
4C x 3.5□
4C x 5.5□4C x 8□
CG16
CG19
ø14.2
CTC4C x 3.5
ø14.5
CTC6C x 2
Vinyl power supply cable (VCT)Rubber power supply cable
(2CT)
ø16.8
CTC8C x 2
ø17.5
CTC4C x 5.5
ø19.5
CTC4C x 8
ø24
CTC4C x 14
ø30
CTC4C x 22
ø36
CTC4C x 30
Wiresxcross-sectional
area
Wiresxcross-sectional
areaOuter
diameter
7C composite cable(4C x 3.5□ + 3C x 0.75□)
9C composite cable(4C x 3.5□ + 5C x 0.75□)
Cablediameter
Part No.
Type
ø17.9
CTC4C + 3C
Vinyl power supply cable (VCT)
ø22.3
CTC4C + 5C
Type Cableguard
Cable size
WGL16
WGL19
ø14.2
*ø17.0to ø19.5
4C x 3.5□
4C x 5.5□4C x 8□
CG16
CG19
Wiresxcross-sectional
areaOuter
diameter
Type Cableguard
Cable size
WGO16
WGO19
With ø4 toø6 wire clip
Type
Cross-Section area (mm2)
WB
2□ 3.5□ 5.5□ 8□ 14□ 22□ 38□
10152025303540455060708090
100
25
17
12
45
30
22
18
71
47
35
28
23
20
103
69
51
41
34
29
25
23
121
90
72
60
51
45
40
36
30
114
95
81
71
63
57
47
40
35
111
97
86
77
64
55
48
43
38
IA
SOFTRUN DEVICE (Option) POWER SUPPLY CABLES AND ACCESSORIES
SOFTRUN
Power supply cable
Junction cable forelectric chain hoist(ER2M) and rope hoist
Wire guide L
* Option
Wire guide O
* Option
Wire bolt assembly
Allowable length (m)of power supply cable(200V)
SOFTRUN uses a phase controlsystem to adjust torque and the timer.The cushion time can be freely setbetween 1 and 5 seconds. It enablessmooth start-up and operation withoutload swing. SOFTRUN uses a highly reliable semiconductor to maintain a long life.
This guide is used to power the supplycable system (for low-head endcarriage).
This guide is used to power the supplycable system (for both overhead andlow-head types).
This bolt is used to fix messengerwires.
How to identify allowable power supply cable
•Internal wiring specification JEAC8001-1995 120-1 Voltage drop
The voltage drop in low voltage lines is, as a rule,to be kept within 2% of the standard voltage of thetrunk line and the branch circuit.
I A : Electric chain hoist or rope hoistRated current + Rated current of travel motor x 2
Junction cable connecting the crane contral box to the electric chain hoist. It is used for the power supply and operation circuits.
Allowablelength (m) = x1000
30.8
Cross-sectional areaof single wire (mm2)xrated voltagex0.02
I A
•Control method: Voltage drop start-up using T-phase control.•Environment: Ambient temperature: -10 to 40 ˚C (No freezing) Installation site: Indoor, free of dust and corrosive gases.•Dust and water protection: IP20 (Specified by I.E.C.)•Color: Munsell 6YR6/14•220.440 V and 575 V / 60 Hz(for CSA) boxes available on request.
This device electrically controls motor speed which enables the
crane to accelerate smoothly in travel and minimizes load
swing at start-up.
It is highly suited for handling high inertia loads or
operating long span cranes.
•Easily installed between the control box and geared motor. Wiring connections are simple.•Applicable for all models of motorized end carriages.
Electric slow start Mechanical slow stop
Time
Without slow start
Full speed
No.
of r
evol
utio
ns
Operation button Off
SOFTRUN
BGE
4-7
CI1I2
F D
H
A
4-24 Filmedcoveredgrommet
170
65550
20.5
Cable guard
2-11
Cable guard
ø32
8
45
110
78
ø32
22 2- ø14
32
101
M1018.3
32 33
Type
Wiresxcross-sectional
area4Cx2□ 4Cx3.5□ 6Cx2□ 8Cx2□ 4Cx5.5□ 4Cx8□ 4Cx14□ 4Cx22□ 4Cx30□
Cablediameter
Part No.
Type
Power supply
Rated voltage
Workingvoltagerange
A B C D E F G H I1 I2
Dimensions (mm)Ratedcurrent
Timerrange
Gearedmotoroutput
Torquesettingrange
Mass(kg/set)
SR150S-S
SR150S-Y
SR150S-A
SR300S-S
SR300S-Y
SR300S-A
SR300S-SX2
SR300S-SY2
SR300S-SA2
7.5 A
15 A
0.25 kWx20.4 kWx20.75 kWx2
1.5 kWx2
1.5 kWx4
0 to 10 1 to 5 sec ±10%
200 V
400 V
500 V
200 V
400 V
500 V
200 V
400 V
500 V
152 330 90 147 299 75 310 30 45 35
2.5
3
ø12.3
CTC4C x 2
3Cx2□
ø11
CTC3C x 2
ø14.2
*ø17.0to ø19.0
4C x 3.5□
4C x 5.5□4C x 8□
CG16
CG19
ø14.2
CTC4C x 3.5
ø14.5
CTC6C x 2
Vinyl power supply cable (VCT)Rubber power supply cable
(2CT)
ø16.8
CTC8C x 2
ø17.5
CTC4C x 5.5
ø19.5
CTC4C x 8
ø24
CTC4C x 14
ø30
CTC4C x 22
ø36
CTC4C x 30
Wiresxcross-sectional
area
Wiresxcross-sectional
areaOuter
diameter
7C composite cable(4C x 3.5□ + 3C x 0.75□)
9C composite cable(4C x 3.5□ + 5C x 0.75□)
Cablediameter
Part No.
Type
ø17.9
CTC4C + 3C
Vinyl power supply cable (VCT)
ø22.3
CTC4C + 5C
Type Cableguard
Cable size
WGL16
WGL19
ø14.2
*ø17.0to ø19.5
4C x 3.5□
4C x 5.5□4C x 8□
CG16
CG19
Wiresxcross-sectional
areaOuter
diameter
Type Cableguard
Cable size
WGO16
WGO19
With ø4 toø6 wire clip
Type
Cross-Section area (mm2)
WB
2□ 3.5□ 5.5□ 8□ 14□ 22□ 38□
10152025303540455060708090
100
25
17
12
45
30
22
18
71
47
35
28
23
20
103
69
51
41
34
29
25
23
121
90
72
60
51
45
40
36
30
114
95
81
71
63
57
47
40
35
111
97
86
77
64
55
48
43
38
IA
SOFTRUN DEVICE (Option) POWER SUPPLY CABLES AND ACCESSORIES
SOFTRUN
Power supply cable
Junction cable forelectric chain hoist(ER2M) and rope hoist
Wire guide L
* Option
Wire guide O
* Option
Wire bolt assembly
Allowable length (m)of power supply cable(200V)
SOFTRUN uses a phase controlsystem to adjust torque and the timer.The cushion time can be freely setbetween 1 and 5 seconds. It enablessmooth start-up and operation withoutload swing. SOFTRUN uses a highly reliable semiconductor to maintain a long life.
This guide is used to power the supplycable system (for low-head endcarriage).
This guide is used to power the supplycable system (for both overhead andlow-head types).
This bolt is used to fix messengerwires.
How to identify allowable power supply cable
•Internal wiring specification JEAC8001-1995 120-1 Voltage drop
The voltage drop in low voltage lines is, as a rule,to be kept within 2% of the standard voltage of thetrunk line and the branch circuit.
I A : Electric chain hoist or rope hoistRated current + Rated current of travel motor x 2
Junction cable connecting the crane contral box to the electric chain hoist. It is used for the power supply and operation circuits.
Allowablelength (m) = x1000
30.8
Cross-sectional areaof single wire (mm2)xrated voltagex0.02
I A
•Control method: Voltage drop start-up using T-phase control.•Environment: Ambient temperature: -10 to 40 ˚C (No freezing) Installation site: Indoor, free of dust and corrosive gases.•Dust and water protection: IP20 (Specified by I.E.C.)•Color: Munsell 6YR6/14•220.440 V and 575 V / 60 Hz(for CSA) boxes available on request.
This device electrically controls motor speed which enables the
crane to accelerate smoothly in travel and minimizes load
swing at start-up.
It is highly suited for handling high inertia loads or
operating long span cranes.
•Easily installed between the control box and geared motor. Wiring connections are simple.•Applicable for all models of motorized end carriages.
Electric slow start Mechanical slow stop
Time
Without slow start
Full speed
No.
of r
evol
utio
ns
Operation button Off
SOFTRUN
BGE
4-7
CI1I2
F D
H
A
4-24 Filmedcoveredgrommet
170
65550
20.5
Cable guard
2-11
Cable guard
ø32
8
45
110
78
ø32
22 2- ø14
32
101
M1018.3
34 35
L-50x50x6to
L-75x75x9ø10 to ø26
Type
THLT26S-75
THLP26S-75
Anglesteel width
Cablesize
ø10 to ø22
ø10to
ø22
ø22.1to
ø26
Type Railwidth
THI19W-100
THI19W-150
THI19W-175
THI26W-100
THI26W-150
THI26W-175
75 to 100
125 to 150
175
75 to 100
125 to 150
175
Cable sizeUpper Lower
ø16.8 orø19.4 to ø19.5
ø16.8 or ø22.3
ø11 orø12.3 to ø14.5
ø17.5 to ø17.9
Type
TTH14S-100VTTH14S-175VTTH17S-100VTTH17S-175VTTH19S-100VTTH19S-175VTTH21S-100VTTH21S-175V
Railwidth
Cable size
75 to 150
175
75 to 150
175
75 to 150
175
75 to 150
175
ø4 to ø6ø16.8 or
ø19.4 to ø19.5
ø16.8 or ø22.3
ø11 orø12.3 to ø14.5
ø17.5 to ø17.9
Type
CH14S
CH17S
CH19S
CH21S
Messengerwire
Cable size
Type
CG13
CG16
CG19
CG22
CG26
Cable size
ø10 to ø13
ø13.1 to ø16
ø16.1 to ø19
ø19.1 to ø22
ø22.1 to ø26
øA
10
13
16
19
22
øB
25
26
34
øC
28
37
D
32
Girdersection
DimensionsA x B x t1 x t2
(kg/m)
26
38.3
55.5
48.3
65.5
76.8
58.5
87.2
72
95.8
91.7
115
500 kg
6.0
6.0
8.6
8.3
11.2
11.2
10.2
10.0
11.6(11.2)
11.6(11.2)
11.6(11.2)
11.6(11.2)
11.2
11.0
11.6(11.2)
11.6(11.2)
11.6(11.2)
11.6(11.2)
11.6(11.2)
11.6(11.2)
11.6(11.2)
1.0 t
4.6
4.6
6.7
6.1
8.2
8.2
9.0
7.6
10.2
10.2
11.2
11.2
9.4
9.0
11.6(11.2)
11.6(11.2)
11.0
10.6
11.6(11.2)
11.6(11.2)
11.6(11.2)
11.6(11.2)
11.6(11.2)
1.5 t
5.5
6.9
6.9
6.8
8.5
8.5
9.4
9.4
7.8
7.7
11.3(11.2)
11.3(11.2)
9.3
8.7
11.6(11.2)
11.6(11.2)
11.6(11.2)
11.0
11.6(11.2)
2.0 t
4.5
6.0
6.0
6.1
7.7
7.4
8.2
8.2
6.9
9.9
9.9
8.3
8.1
11.3(11.2)
11.2
10.5
10.7
11.6(11.2)
11.6(11.2)
2.5 t
4.0
5.4
5.4
5.6
6.8
6.7
7.5
7.5
6.4
9.0
9.0
7.6
7.5
10.3
9.4
9.6
9.9
11.6(11.2)
11.4(11.2)
3.0 t
4.9
4.9
4.9
6.2
6.4
6.9
6.9
6.0
8.3
8.3
7.2
7.1
9.2
8.7
8.8
9.3
11.1
10.5
5.0 t
3.8
4.3
5.4
5.0
3.6
6.6
6.1
5.6
5.1
6.8
6.6
6.8
6.8
8.5
8.1
7.5 t
4.5
4.2
5.2
4.8
5.6
6.8
6.5
10 t
3.1
3.9
3.6
5.4
4.8
I-200 x 100 x 7 x 10
I-250 x 125 x 7.5 x 12.5
I-250 x 125 x 10 x 19
I-300 x 150 x 8 x 13
I-300 x 150 x 10 x 18.5
I-300 x 150 x 11.5 x 22
I-350 x 150 x 9 x 15
I-350 x 150 x 12 x 24
I-400 x 150 x 10 x 18
I-400 x 150 x 12.5 x 25
I-450 x 175 x 11 x 20
I-450 x 175 x 13 x 26
Allowable span (m)
B
t1
t2
A
I-beam
: For kito electric hoist.: For kito wire rope hoist.
CABLE HANGERS
Angled hanger
T-type hanger for wirerope hoists
T-type hanger for electric chain hoist(ER2M)
Cable hanger
Cable guard
This hanger is used to hang powersupply cables with messenger wires.
This guard is used to protect cablesstrung from T-type and angledhangers.
This hanger uses an angle steel tohang power supply cables. TheTHLP type is used to hang push-button cord.
This hanger is used to hang powersupply cables and is suited for allsizes of cable and rails.•Suited for hanging dynamic and operation cables for rope hoists.
This hanger is used to hang powersupply cables. It is applicable for allsizes of cable and rail widths, andis suited for compound cables.
•THLT type •THLP type
CRANE GIRDER ALLOWABLE SPANSingle Rail (JIS)
•The above data is calculated according to the crane standard in Japan: Deflection=Within 1/1000 x span. Allowable bending stress=Within 1390 kg/cm2
•A stop drawing for the girder available on request.•The figures in parentheses are data for Low-head cranes.
94
Cable guard Cable guard
46 68
94
46
48
100
Cable guard
57
29 or 33
46
41
29 or 33
42
D
C
6 (6) 1.5
BA
34 35
L-50x50x6to
L-75x75x9ø10 to ø26
Type
THLT26S-75
THLP26S-75
Anglesteel width
Cablesize
ø10 to ø22
ø10to
ø22
ø22.1to
ø26
Type Railwidth
THI19W-100
THI19W-150
THI19W-175
THI26W-100
THI26W-150
THI26W-175
75 to 100
125 to 150
175
75 to 100
125 to 150
175
Cable sizeUpper Lower
ø16.8 orø19.4 to ø19.5
ø16.8 or ø22.3
ø11 orø12.3 to ø14.5
ø17.5 to ø17.9
Type
TTH14S-100VTTH14S-175VTTH17S-100VTTH17S-175VTTH19S-100VTTH19S-175VTTH21S-100VTTH21S-175V
Railwidth
Cable size
75 to 150
175
75 to 150
175
75 to 150
175
75 to 150
175
ø4 to ø6ø16.8 or
ø19.4 to ø19.5
ø16.8 or ø22.3
ø11 orø12.3 to ø14.5
ø17.5 to ø17.9
Type
CH14S
CH17S
CH19S
CH21S
Messengerwire
Cable size
Type
CG13
CG16
CG19
CG22
CG26
Cable size
ø10 to ø13
ø13.1 to ø16
ø16.1 to ø19
ø19.1 to ø22
ø22.1 to ø26
øA
10
13
16
19
22
øB
25
26
34
øC
28
37
D
32
Girdersection
DimensionsA x B x t1 x t2
(kg/m)
26
38.3
55.5
48.3
65.5
76.8
58.5
87.2
72
95.8
91.7
115
500 kg
6.0
6.0
8.6
8.3
11.2
11.2
10.2
10.0
11.6(11.2)
11.6(11.2)
11.6(11.2)
11.6(11.2)
11.2
11.0
11.6(11.2)
11.6(11.2)
11.6(11.2)
11.6(11.2)
11.6(11.2)
11.6(11.2)
11.6(11.2)
1.0 t
4.6
4.6
6.7
6.1
8.2
8.2
9.0
7.6
10.2
10.2
11.2
11.2
9.4
9.0
11.6(11.2)
11.6(11.2)
11.0
10.6
11.6(11.2)
11.6(11.2)
11.6(11.2)
11.6(11.2)
11.6(11.2)
1.5 t
5.5
6.9
6.9
6.8
8.5
8.5
9.4
9.4
7.8
7.7
11.3(11.2)
11.3(11.2)
9.3
8.7
11.6(11.2)
11.6(11.2)
11.6(11.2)
11.0
11.6(11.2)
2.0 t
4.5
6.0
6.0
6.1
7.7
7.4
8.2
8.2
6.9
9.9
9.9
8.3
8.1
11.3(11.2)
11.2
10.5
10.7
11.6(11.2)
11.6(11.2)
2.5 t
4.0
5.4
5.4
5.6
6.8
6.7
7.5
7.5
6.4
9.0
9.0
7.6
7.5
10.3
9.4
9.6
9.9
11.6(11.2)
11.4(11.2)
3.0 t
4.9
4.9
4.9
6.2
6.4
6.9
6.9
6.0
8.3
8.3
7.2
7.1
9.2
8.7
8.8
9.3
11.1
10.5
5.0 t
3.8
4.3
5.4
5.0
3.6
6.6
6.1
5.6
5.1
6.8
6.6
6.8
6.8
8.5
8.1
7.5 t
4.5
4.2
5.2
4.8
5.6
6.8
6.5
10 t
3.1
3.9
3.6
5.4
4.8
I-200 x 100 x 7 x 10
I-250 x 125 x 7.5 x 12.5
I-250 x 125 x 10 x 19
I-300 x 150 x 8 x 13
I-300 x 150 x 10 x 18.5
I-300 x 150 x 11.5 x 22
I-350 x 150 x 9 x 15
I-350 x 150 x 12 x 24
I-400 x 150 x 10 x 18
I-400 x 150 x 12.5 x 25
I-450 x 175 x 11 x 20
I-450 x 175 x 13 x 26
Allowable span (m)
B
t1
t2
A
I-beam
: For kito electric hoist.: For kito wire rope hoist.
CABLE HANGERS
Angled hanger
T-type hanger for wirerope hoists
T-type hanger for electric chain hoist(ER2M)
Cable hanger
Cable guard
This hanger is used to hang powersupply cables with messenger wires.
This guard is used to protect cablesstrung from T-type and angledhangers.
This hanger uses an angle steel tohang power supply cables. TheTHLP type is used to hang push-button cord.
This hanger is used to hang powersupply cables and is suited for allsizes of cable and rails.•Suited for hanging dynamic and operation cables for rope hoists.
This hanger is used to hang powersupply cables. It is applicable for allsizes of cable and rail widths, andis suited for compound cables.
•THLT type •THLP type
CRANE GIRDER ALLOWABLE SPANSingle Rail (JIS)
•The above data is calculated according to the crane standard in Japan: Deflection=Within 1/1000 x span. Allowable bending stress=Within 1390 kg/cm2
•A stop drawing for the girder available on request.•The figures in parentheses are data for Low-head cranes.
94
Cable guard Cable guard
46 68
94
46
48
100
Cable guard
57
29 or 33
46
41
29 or 33
42
D
C
6 (6) 1.5
BA
36 37
Type
Mot
oriz
edU
reth
ane
Whe
el T
ype
Ove
rhea
dLo
w-h
ead
Ove
rhea
d
Dou
ble
Gird
er
Ove
rhea
dU
reth
ane
Whe
el T
ype
Low
-he
ad
Span (m)
1
2
3
5
7.5
10
1
2
3
5
1
2
3
5
7.5
10
1
2
3
5
7.5
10
15
20
3
5
7.5
10
15
20
SBM015S,SN
SBM015S,SN (SBM030S,SN)
SBM015S,SN
SBM015S,SN
SBM015S,SN (SBM030S,SN)
SBM030S,SN
SBM015S,SN
SBM015S,SN
SBM015S,SN (SBM030S,SN)
SBM030S,SN
SBM030S,SN (*SBM060S,*SN)
SBM015S,SN (SBM030S,SN)
SBM030S,SN
*SBM060S,*SN
*SBM060S,*SN (*SBM120S,*SN)
SBM030S,SN
SBM030S,SN (*SBM060S,*SN)
W.L.L.(t) 3 6 9 12 15 18 21 24 27
Type
Mot
oriz
edU
reth
ane
Whe
el T
ype
Ove
rhea
dLo
w-h
ead
Ove
rhea
d
Dou
ble
Gird
er
Ove
rhea
dU
reth
ane
Whe
el T
ype
Low
-he
ad
Span (m)
1
2
3
5
7.5
10
1
2
3
5
1
2
3
5
7.5
10
1
2
3
5
7.5
10
15
20
3
5
7.5
10
15
20
SBM015SD,SDN
SBM015SD,SDN
SBM030SD,*SDN
SBM015SD,SDN
SBM015SD,SDN
SBM030SD,*SDN
SBM015SD,SDN
SBM030SD,*SDN
*SBM060SD,*SDN
W.L.L.(t) 3 6 9 12 15 18 21 24 27
PERIPHERAL EQUIPMENT COVERAGE■ Table of Control Box for Electric Chain Hoist (Single speed) ■ Table of Control Box for Electric Chain Hoist (Dual speed)
•S: Without emergency stop device. SN: With emergency stop device.Types in parentheses show high speed type.
*Available on request.
•SD: Without emergency stop device. SDN: With emergency stop device.*Available on request.
36 37
Type
Mot
oriz
edU
reth
ane
Whe
el T
ype
Ove
rhea
dLo
w-h
ead
Ove
rhea
d
Dou
ble
Gird
er
Ove
rhea
dU
reth
ane
Whe
el T
ype
Low
-he
ad
Span (m)
1
2
3
5
7.5
10
1
2
3
5
1
2
3
5
7.5
10
1
2
3
5
7.5
10
15
20
3
5
7.5
10
15
20
SBM015S,SN
SBM015S,SN (SBM030S,SN)
SBM015S,SN
SBM015S,SN
SBM015S,SN (SBM030S,SN)
SBM030S,SN
SBM015S,SN
SBM015S,SN
SBM015S,SN (SBM030S,SN)
SBM030S,SN
SBM030S,SN (*SBM060S,*SN)
SBM015S,SN (SBM030S,SN)
SBM030S,SN
*SBM060S,*SN
*SBM060S,*SN (*SBM120S,*SN)
SBM030S,SN
SBM030S,SN (*SBM060S,*SN)
W.L.L.(t) 3 6 9 12 15 18 21 24 27
Type
Mot
oriz
edU
reth
ane
Whe
el T
ype
Ove
rhea
dLo
w-h
ead
Ove
rhea
d
Dou
ble
Gird
er
Ove
rhea
dU
reth
ane
Whe
el T
ype
Low
-he
ad
Span (m)
1
2
3
5
7.5
10
1
2
3
5
1
2
3
5
7.5
10
1
2
3
5
7.5
10
15
20
3
5
7.5
10
15
20
SBM015SD,SDN
SBM015SD,SDN
SBM030SD,*SDN
SBM015SD,SDN
SBM015SD,SDN
SBM030SD,*SDN
SBM015SD,SDN
SBM030SD,*SDN
*SBM060SD,*SDN
W.L.L.(t) 3 6 9 12 15 18 21 24 27
PERIPHERAL EQUIPMENT COVERAGE■ Table of Control Box for Electric Chain Hoist (Single speed) ■ Table of Control Box for Electric Chain Hoist (Dual speed)
•S: Without emergency stop device. SN: With emergency stop device.Types in parentheses show high speed type.
*Available on request.
•SD: Without emergency stop device. SDN: With emergency stop device.*Available on request.
38 39
Type
Mot
oriz
edU
reth
ane
Whe
el T
ype
Ove
rhea
dLo
w-h
ead
Ove
rhea
d
Dou
ble
Gird
er
Ove
rhea
dU
reth
ane
Whe
el T
ype
Low
-he
ad
Span (m)
1
2
3
5
7.5
10
1
2
3
5
1
2
3
5
7.5
10
1
2
3
5
7.5
10
15
20
3
5
7.5
10
15
20
SBH008S,SN
SBH015S,SN (SBH030S,*SN)
SBH008S,SN
SBH008S,SN (SBH015S,SN)
SBH008S,SN
SBH015S,SN
SBH015S,SN (SBH030S,*SN)
SBH030S,*SN
SBH008S,SN
SBH008S,SN (SBH015S,SN)
SBH008S,SN
SBH008S,SN (SBH015S,SN)
SBH015S,SN (SBH030S,*SN)
SBH030S,*SN
SBH030S,*SN (*SBH060S,*SN)
SBH015S,SN (SBH030S,*SN)
SBH030S,*SN
*SBH060S,*SN
*SBH060S,*SN (*SBH120S,*SN)
SBH008S,SN (SBH015S,SN)
SBH015S,SN
SBH008S,SN (SBH015S,SN)
SBH030S,*SN
SBH030S,*SN (*SBH060S,*SN)
W.L.L.(t) 3 6 9 12 15 18 21 24 27
Type
Mot
oriz
edU
reth
ane
Whe
el T
ype
Ove
rhea
dLo
w-h
ead
Ove
rhea
d
Dou
ble
Gird
er
Ove
rhea
dU
reth
ane
Whe
el T
ype
Low
-he
ad
Span (m)
1
2
3
5
7.5
10
1
2
3
5
1
2
3
5
7.5
10
1
2
3
5
7.5
10
15
20
3
5
7.5
10
15
20
SR150S
SR150S (SR300S)
SR150S
SR150S
SR150S (SR300S)
SR300S
SR150S
SR150S
SR150S (SR300S)
SR300S
SR300S (SR300SX2)
SR150S (SR300S)
SR300S
SR300SX2
SR300SX2 (SR300SX4)
SR300S (SR300SX2)
SR300S
W.L.L.(t) 3 6 9 12 15 18 21 24 27
■ Table of Control Box for Wire Rope Hoist (Single speed) ■ Table of Control Box for Electric Chain Hoist (Dual speed)
•S: Without emergency stop device. SN: With emergency stop device.Types in parentheses show high speed type.
*Available on request.
•Types in parentheses show high speed type.
38 39
Type
Mot
oriz
edU
reth
ane
Whe
el T
ype
Ove
rhea
dLo
w-h
ead
Ove
rhea
d
Dou
ble
Gird
er
Ove
rhea
dU
reth
ane
Whe
el T
ype
Low
-he
ad
Span (m)
1
2
3
5
7.5
10
1
2
3
5
1
2
3
5
7.5
10
1
2
3
5
7.5
10
15
20
3
5
7.5
10
15
20
SBH008S,SN
SBH015S,SN (SBH030S,*SN)
SBH008S,SN
SBH008S,SN (SBH015S,SN)
SBH008S,SN
SBH015S,SN
SBH015S,SN (SBH030S,*SN)
SBH030S,*SN
SBH008S,SN
SBH008S,SN (SBH015S,SN)
SBH008S,SN
SBH008S,SN (SBH015S,SN)
SBH015S,SN (SBH030S,*SN)
SBH030S,*SN
SBH030S,*SN (*SBH060S,*SN)
SBH015S,SN (SBH030S,*SN)
SBH030S,*SN
*SBH060S,*SN
*SBH060S,*SN (*SBH120S,*SN)
SBH008S,SN (SBH015S,SN)
SBH015S,SN
SBH008S,SN (SBH015S,SN)
SBH030S,*SN
SBH030S,*SN (*SBH060S,*SN)
W.L.L.(t) 3 6 9 12 15 18 21 24 27
Type
Mot
oriz
edU
reth
ane
Whe
el T
ype
Ove
rhea
dLo
w-h
ead
Ove
rhea
d
Dou
ble
Gird
er
Ove
rhea
dU
reth
ane
Whe
el T
ype
Low
-he
ad
Span (m)
1
2
3
5
7.5
10
1
2
3
5
1
2
3
5
7.5
10
1
2
3
5
7.5
10
15
20
3
5
7.5
10
15
20
SR150S
SR150S (SR300S)
SR150S
SR150S
SR150S (SR300S)
SR300S
SR150S
SR150S
SR150S (SR300S)
SR300S
SR300S (SR300SX2)
SR150S (SR300S)
SR300S
SR300SX2
SR300SX2 (SR300SX4)
SR300S (SR300SX2)
SR300S
W.L.L.(t) 3 6 9 12 15 18 21 24 27
■ Table of Control Box for Wire Rope Hoist (Single speed) ■ Table of Control Box for Electric Chain Hoist (Dual speed)
•S: Without emergency stop device. SN: With emergency stop device.Types in parentheses show high speed type.
*Available on request.
•Types in parentheses show high speed type.
Printed in Japan 28.03(A.H)CRGE01-016
End Carriage, Geared Motor, Peripheral Equipment
KITO CRANE
BULLETIN NO. CRGE1603-01
U.S.A.HARRINGTON HOISTS, INC.401 West End Avenue, Manheim, PA 17545, U.S.A.TEL: +1-717-665-2000 FAX: +1-717-665-2861www.harringtonhoists.com
CANADAKITO CANADA INC.309-3815 1st. Avenue, Burnaby, BC. V5C 3V6, CANADATEL: +1-604-291-9955 FAX: +1-604-294-8855E-mail: [email protected]
BRAZILKITO DO BRASIL COMÉRCIO DE TALHAS E GUINDASTES LTDAUnidade 38 do CLE – CENTRO LOGISTICO EMBURua José Semião Rodrigues Agostinho, 1370, Bairro Água Espraiada – Embu das Artes, SP, BRASILTEL: +55-11-3253-1000 FAX: +55-11-3253-1008E-mail: [email protected] www.kito.com/br
GERMANYKITO EUROPE GmbHHeerdter Lohweg 93, D-40549 Düsseldorf, GERMANYTEL: +49-(0)211-528009-00 FAX: +49-(0)211-528009-59E-mail: [email protected]
CHINAJIANGYIN KITO CRANE CO., LTD.18 Cheng Jiang East Road, Jiang Yin, Jiang Su 214429, CHINATEL: +86-510-86199666 FAX: +86-510-86196633www.kaicheng.comKITO HOISTS & CRANES (SHANGHAI) CO., LTD.Room 11J, Zao-Fong Universe Building, No1800 ZhongShan West Road Shanghai 200235, CHINA TEL: +86-21-54488935 FAX: +86-21-54488937www.kito.com.cn
KOREAKITO KOREA CO., LTD.463-400, 3Dong 903, 15, 228Beon-gil, Pangyo-ro, Bundang-gu, Seongnam-si, Gyeonggi-do, KOREATEL: +82-31-600-7450 FAX: +82-31-600-7469www.kito.kr
THAILANDSIAM KITO CO., LTD.205 M.2, T.Klongtumru, A.Muangchonburi, Chonburi 20000, THAILANDTEL: +66-3819-5711 FAX: +66-3819-5715www.siamkito.co.th
INDONESIAPT. KITO INDONESIAWisma Keiai 5F, Jl. Jend. Sudirman Kav.3-4, Jakarta 10220, INDONESIATEL: +62-21-572-4261 FAX: +62-21-572-4267E-mail: [email protected]
INDIAArmsel MHE Pvt. Ltd.4th Floor, Block II, Prestige Towers, No 99 & 100, Residency Road, Bengaluru-560025, INDIATEL: +91-80-49010500 FAX: +91-80-49010555www.armsel.com
TAIWANKITO TAIWAN CO., LTD.12F-1, 128c sec. 3, Ming-Shen East Road, Taipei, TAIWAN 10596TEL: +886-2-2719-7616 FAX: +886-2-2719-6900
Distributed by:
SHINJUKU NS Bldg. 9F, 2-4-1 Nishi-Shinjuku, Shinjuku-ku, Tokyo 163-0809 JAPANTEL: +81-3-5908-0180 FAX: +81-3-5908-0189 www.kito.co.jp/en KITO Global Website: kito.com
•The functions and performance of the products mentioned in the catalog have been designed based on the related regulations and standards. If they are used for other than their intended purposes such as being integrated into your equipment, we will not take any responsibility for accidents attributable to their unintended usages as well as guarantee their performance and functions. Never remodel our products. •When you want to use our products for special purposes, consult us in advance.•When you want to export our products, consult us in advance. There are different standards and regulations from one destination to another.•It is prohibited to reprint, copy or divert all the information in this catalog (product patents, trademarks, photos, designs, copies, illustrations, etc.) without our consent.•The specifications in this catalog are partly subject to change without prior notice.•Product specifications may vary depending on the country. For more details please contact the nearest KITO dealer.
International Sales Subsidiaries