eng cs 1773095 backplane connector multigig rt 0512[1]

137Catalog 1773095 Dimensions are shown for Dimensions are in millimeters Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666Revised 4-12 reference purposes only. and inches unless otherwise Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686

Specifications subject specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015

High Speed Backplane Connectors

MULTIG

IGRTConnector

5

Table of Contents

MULTIGIG RT Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137-162

Product Line Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138

Connector Sequencing Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139

Mating Sequencing Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140

Product Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141-143

Customization Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144-146

MULTIGIG RT Tier 1 Connector System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147, 148

MULTIGIG RT Tier 2 Connector System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149, 150

Connector Selection Grid for VITA 41 VXS Compliant Connectors . . . . . . . . . . . . . 151-153

Connector Selection Grid for VITA 46 VPX Compliant Connectors . . . . . . . . . . . . . 154-157

“New” MULTIGIG RT Stacking Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158

Power Modules and Guide Hardware Reference . . . . . . . . . . . . . . . . . . . . . . . . . . 159-162

VITA, VMEbus, VPX, and VXS aretrademarks of VITA.




MULTIGIG RT Connector Products

The MULTIGIG RT productline is a backplane intercon-nect family that offers flexi-bility and customization.This printed circuit based,pinless, interconnect familyis comprised of modularcomponents which can beused in a variety of combi-nations. The connectors inthis innovatively flexibleplatform can be combinedto provide the density, datathroughput, and signalintegrity required for appli-cations in today’s computer,military, medical, or indus-trial control industries. Theuse of printed circuit wafersin this connector system

allows for cost effectivesequencing and electricalcustomization of the con-nector. Wafers can be man-ufactured specifically fordifferential or signal endedperformance and theimpedance, propagationdelay, and crosstalk of theconnector can be alteredper customer requirements.This scalable board tobackplane connector familyis a robust, “pinless” designwhich eliminates the pinfield on backplane boardsand reduces the end user’sexposure to field failure incard cage systems. TheMULTIGIG RT connector

family is designed specifi-cally for 20.30 [.800] or25.40 [1.00] card pitchsystems.

� MULTIGIG RT 1connector —141 signals/inch, datarates up to 3.125 Gb/s

� MULTIGIG RT 2connector —113 signals/inch, datarates of 3.125 Gb/s to6.4� Gb/s and has beendemonstrated to support10 Gb/s

www.multigigrt.com

Product Facts

� Customizable impedancematched printed circuitwafer interface

� Available for stackingapplications

� Inverse sex backplaneconnector system with“pinless” interface

� Superior crosstalkperformance

� Optimized footprints forsignal integrity and ease ofboard design

� Utilizes a 0.56 [.022]diameter via for backplaneconnector for lower costboard fabrication

� Three levels of signalcontact sequencing

� Available in modular style

� Available for 20.30 [.800]or 25.40 [1.00] card pitchsystems

� Durability rated for 200cycles

� Fully compatible with MPbased fiber optic arrayinterconnects

� Complete connector familyincludes

� Power Modules = >Maximize Amps/inchdensity, voltages in pairs

� Guidance Modules

� Die cast for strength

� Optional ESD contact

� Three sequence levels

� Press fit or hardwaremounted

� Backplane drill patternenabled keying

� Cable assemblyproposals available

� MULTIGIG RT connectorproducts are fullycompatible with 2mm HMequipment practices

Applications

� TelecommunicationsEquipment

� Metro Optical Networkingequipment

� SONET switched platforms

� Aggregation switches

� Midrange Servers

� High End Servers

� High speed custom platforms

� Mass data storage

� Rugged, mission-criticalapplications

Technical Documents

Application Specifications

114-13062 Power Modules

114-13056 Signal Connectors

Product Specifications

108-2062 Power Modules


Qualification Test Reports

501-538 Power Connectors


Engineering Report

502-1130 Power Connectors

Routing Guide RT 2 on te.com




MULTIG

IGRTConnector

5

MULTIGIG RT Connector Products (Continued)

0

Fully-MatedWipeLength

2.5 mm

3 6 9 12 15 18 21

8.25 mm

9.75 mm

11.25 mm

18.25 mm

20.75 mm

ESD Contact onGuide Pin

Key on Guide Pin

4.0 mm

5.5 mm

Signal Level 1

Signal Level 2

Signal Level 3Ground Level

Power Level 1

Power Level 2

Power Level 3

MULTIGIG RT ConnectorSequencing Chart





Fully Mated Reliable Mate

MULTIGIG RT ConnectorMating Sequence Chartwhich shows the relation-ship of MULTIGIG RTConnector products withother TE products

Dim. A Dim B.Product

Dim. C Fully Contact Reliable First MateFully Mated

FamilyMated Mate Last Break

Wipe Length

1.50 12.50Ground Shield 16.78 [.661] 17.55 [.691] 4.28 [.169]

Z-PACK HM-Zd.059 .492

Signal Level 2 15.41 [.607] 15.85 [.624] 2.91 [.115]Product

Signal Level 1 13.91 [.548] 14.35 [.565] 1.41 [.056]

Z-PACK HM-Zd3.00 12.50

24.0 mm Pin 27.50 [1.083] 33.40 [1.315] N/A

Guide.118 .492

22.2 mm Pin 25.70 [1.012] 31.60 [1.244] N/AHardware Key Blocking Point N/A 22.03 [.867] N/A

1.50 12.50Ground Pins 16.44 [.647] 17.13 [.674] 3.94 [.155]

Z-PACK TinMan.059 .492


Signal Level 1 N/A N/A N/A

1.50 12.50Signal Level 3 18.27 [.719] 18.84 [.742] 5.77 [.227]

Z-PACK 2mm HM.059 .492


Signal Level 1 15.27 [.601] 15.84 [.624] 2.77 [.109]

Ground 18.00 [.709] — 5.50 [.217]MULTIGIG RT 2.50 12.50 Signal Level 3 18.00 [.709] — 5.50 [.217]

T1 .098 .492 Signal Level 2 16.50 [.650] — 4.00 [.157]ProductSignal Level 1 15.00 [.591] — 2.50 [.098]

Ground 18.00 [.709] — 5.50 [.217]MULTIGIG RT 2.25 12.50 Signal Level 3 18.00 [.709] — 5.50 [.217]

T2 .089 .492 Signal Level 2 16.50 [.650] — 4.00 [.157]ProductSignal Level 1 15.00 [.591] — 2.50 [.098]

MULTIGIG RT5.50 12.50

Power Level 3 23.75 [.935] — 11.25 [.443]

Power.217 .492

Power Level 2 22.25 [.876] — 9.75 [.384]Module Power Level 1 20.75 [.817] — 8.25 [.325]

MULTIGIG RT12.50 Guide Pin Key 33.25 [1.309] N/A 20.75 [.817]

Guide N/A.492

Hardware Guide ESD Contact 30.75 [1.211] — 18.25 [.719]

1.50 12.50Ground 17.08 [.672] 17.60 [.693] 4.78 [.188]

Z-PACK HS3.059 .492


Signal Level 1 14.55 [.573] 14.97 [.589] 2.25 [.089]

3.50 12.50Power Level 3 20.25 [.797] 20.95 [.825] 8.10 [.319]

UPM.138 .492

Power Level 2 18.65 [.734] 19.35 [.762] 6.50 [.256]

Power Level 1 17.03 [.670] 17.73 [.698] 4.88 [.192]

UPM5.75 12.50

Guide Pin Key 31.39 [1.236] 36.16 [1.424] N/A

Guide.226 .492

Keyed Guide Pin 31.39 [1.236] 36.16 [1.424] N/AHardware Keyed Guide Pin 35.23 [1.387] 40.00 [1.575] N/A

PreMate Power — 5.61 [.221]

MULTI-BEAM XLLevel 1

— 16.84 [.663]Min.

Right AnglePostMate Power — 4.34 [.171]

Header to5.08 14.73 Level 2

— 17.81 [.701]Min.

Vertical.200 .580 PreMate Signal — 3.81 [.150]

Receptacle Level 2— 18.26 [.719]

Min.

PostMate Signal — 2.54 [.100]Level 3

— 19.53 [.769]Min.

PreMate Power — 5.61 [.221]Level 1

— 15.32 [.603]Min.

MULTI-BEAM XL PostMate Power — 4.34 [.171]Right Angle

3.81 13.21 Level 2— 16.28 [.641]

Min.Receptacle

.150 .520 PreMate Signal — 3.81 [.150]to VerticalLevel 2

— 16.74 [.659]Min.Header

PostMate Signal — 2.54 [.100]Level 3

— 18.01 [.709]Min.




MULTIG

IGRTConnector

5


MULTIGIG RT connectorsconsist of interlocking leftend and right end signalmodules (half or full), centersignal modules, and standalone modules available invertical receptacles (back-plane application) and rightangle plugs (daughtercardapplication), and comple-mentary mechanical guideassemblies (available in size10.80 [.425], 9.00 [.354] or7.20 [.283]. The guideassembly provides blindmating and misalignmentfor the connectors. The10.80 [.425] and 9.00 [.354]guide assembly alsoprovides keying and isavailable with or withoutan internal contact forelectrostatic discharge(ESD) protection.

The modules are capableof being stacked in anyconfiguration within the limi-tations given in this catalogto a maximum length of 120between guide assemblies.These connectors performat two separate densitylevels: Tier 1 and Tier 2.The connectors are placedon the pc board bymanually-operated orautomatic machines.

The modules have 6, 8, or10 rows of signal contactswith 20.30 [.800], 25.40[1.000], or 9.00 [.354]centerline spacing (profilesize). A right angle plugmodule having 7 rows with20.30 [.800] spacing is alsoavailable for Tier 2 only toaccommodate special

applications used by theVMEbus International TradeAssociation (VITA). Thesignal contacts, along withthe ground contacts (in Tier1 modules only) and ESDcontacts (if using the 10.80[.425] guide assemblywith ESD contact) providesequencing for each group

of modules.

When corresponding withpersonnel, use the terminol-ogy provided to facilitateyour inquiries for information.Basic terms and features ofthis product are provided inthe art below and on the fol-lowing page.

Vertical Receptacle(Backplane) Connector

Product Selection Guide

HalfLeft End Module

FullLeft End Module

FullRight End Module

10.8 mmGuide Pins

7.2 mmGuide Pin

Stand AloneModule

Standoff

Center Module

Standoff

Collar

Key No Key

HalfRight End Module

Standoff

Standoff

Housing

Ground Contact(In Tier 1 Only)

Mounting PostWith Screw Hole

Mounting PostWith Threads

MountingPost

Eye-of-NeedleCompliant PinSignal Contact

Polarization Post

Polarization Post

Polarization Rib

Polarization Slot Polarization Slot

Contact Cavities






Signal Modules

Tier 1 and Tier 2 recepta-cles contain eye-of-needlecompliant pin signal con-tacts; the Tier 1 receptaclealso contains ground con-tacts. Each housing fea-tures standoffs for thermalventing, polarization ribs(on end modules) andpolarization slots (on thecenter module) for properstacking of the modules,and polarization posts toensure correct orientationon the pc board.

Plugs contain eye-of-needlecompliant pin signalcontacts and pc wafers(blades). The housingfeatures alignment pins toensure correct orientationon the pc board.

Guide Assemblies

The guide assemblyconsists of a guide pin(used with receptacles)and a guide module (usedwith plugs).

The guide pin features acollar and mounting post

(having a screw hole orthreads) with or without akey. The guide pins areavailable with various lengthmounting posts. The mount-ing post is used with cus-tomer supplied hardware toattach the guide pin to thepc board. Guide pins mustbe chosen according tothickness of pc board beingused; otherwise, interfer-ence with proper mating ordamage to system compo-nents will occur. Guide pinswith keys are available invarious keying positions.

The guide module featuresa housing with or without akey and with a screw hole,mounting post, and pilotpost. The mounting postand pilot post are used toposition the guide moduleon the pc board, and thescrew hole is used withcustomer supplied hard-ware to attach the moduleto the pc board. The 10.80[.425] and 9.00 [.354] guidemodule is available with orwithout an ESD contactlocated inside the module.

Right Angle Plug(Daughtercard) Connector

Product Selection Guide(Continued)

HalfLeft End Module

FullLeft End Module

FullRight End Module

10.8 mmGuide Module

7.2 mmGuide Module

Stand AloneModule

HalfRight End Module

Center Module

Housing

PC Wafers (Blades)

Alignment Pin

ESD Contact(Inside Module)

(Optional)

Housing

Pilot Post

Screw Hole

Mounting Post

Key

No Key

ContactPads

Eye-of-NeedleCompliant PinSignal Contact




MULTIG

IGRTConnector

5


Possible ModuleConfigurations Used withPower Modules

Three Signal Modules and One Power ModuleProduct Selection Guide(Continued)

GuidePin

GuidePin

PowerReceptacle

ModuleReceptacle

Full Left End Module*Receptacle

Center ModuleReceptacle

Full Right End Module*

GuideModule

GuideModule

PowerPlug

Module

PlugFull Left End Module*

PlugCenter Module

PlugFull Right End Module*

Two and One-Half Signal Modules and One Power Module

GuidePin

GuidePin

PowerReceptacle

ModuleReceptacle

Left End ModuleReceptacle



GuideModule

GuideModule

PowerPlug

Module

PlugLeft End Module

PlugCenter Module


Four Signal Modules with One Power Module

GuidePin

GuidePin

PowerReceptacle

ModuleReceptacle

Full Left End Module*Receptacle



GuideModule

GuideModule

PowerPlug

Module

PlugFull Left End Module*

PlugCenter Module

ReceptacleCenter Module

PlugCenter Module


* A Half Left End Module and a HalfRight End Module can be usedinstead.





Customization Options The MULTIGIG RT productline is fully customizable.This is accomplished bymeans of stacking thePCB wafers in the correctlocation to achieve thedesired mix of high speeddifferential, high speedsingle-ended, and low

speed/high speed densitysignals. In addition, powercan be carried through thePCB wafers by replacingone or more signal wafersfor a power wafer.

Shown below is a TEproposal for a typical

MULTIGIG RT connectorapplication. As you can see,we took full advantage ofthe MULTIGIG RT connectorcapabilities. Contact yourTE representative to have aproposal drawn-up to meetyour specific needs.

Typical MULTIGIG RTConnector Implementation

MULTIGIG RT7.2mm GuideReceptacle

MULTIGIG RT 220.3mm Center Plug16 Differential Pair Wafers(3 Pairs Each)

MULTIGIG RT 220.3mm Center Plug16 Open Pin Field Wafers(9 Single-ended Lines Each)

MULTIGIG RT 220.3mm Right End Plug16 Open Pin Field Wafers(9 Single-ended Lines Each)

MULTIGIG RT 220.3mm Right End Plug

3 Open Pin Field Wafers (9 Single-ended Lines Each)8 Single-ended Wafers (6 Lines Each)

2 Power Wafers (3 Lines Each)




MULTIG

IGRTConnector

5


Tier 1 Options

Customization Options(Continued)

The Tier 1 connector systemcan be customized withDifferential and Single-ended wafers. In addition,a power wafer is availablefor the 25.40 [1.000] pitch

product that provides4 power lines and 2 senselines per wafer. Shownbelow are differential,single-ended and poweroptions.





Tier 2 Options

Signal Options Available:0.8" Shown

Differential Wafers

Single-ended w/ 1:1 S/G Ratio

Single-ended w/ 2:1 S/G Ratio

Open Pin Field(No Reference Ground)

Mixed, Differential and S/E Lines

Custom, VITA 41, Mixed

Up to 4 Power Lines/WaferTotal of 19 AMPS/Wafer

Customization Options(Continued)

The Tier 2 connector systemis fully customizable due tothe lack of a bussed groundsystem. This allows us tostack the many optionsavailable (with more being

developed as needed) inany configuration that isnecessary to meet the cus-tomers needs. Shown hereare some of the options thatare currently available.





MULTIG

IGRTConnector

5

MULTIGIG RT Tier 1 Connector System

Target Applications

� High speed telecommunica-tions equipment

� Midrange and high-endservers

� Networking equipment

� Blindmate design

� High speed customplatforms



Product Features

� Excellent performance to3.125 Gb/s

� High density: 140 contactsper inch provides 70 contactpairs per inch fordifferential signaling

� Options include 20.32[.800] and 25.40 [1.000]pitch card spacing

� Modular options for signal,power, keying and guidance

� Optimized footprints

� Robust design

� Low noise levels

� Supports differential pairwidths of 6 mils with 9 milspacings

� Single-ended optionavailable; contact TE forperformance data

The MULTIGIG RT Tier 1connector meets customerrequirements for high-densityand high-performancetwo-piece interconnects.In TE and independent labtests, the MULTIGIG RT Tier1 connector has performedin excess of 3 Gb/s usingstandard FR-4 board mate-rial and routing techniques.

The MULTIGIG RT Tier 1connector is a differentialconnector with a contactdensity of 70 pairs per inch.The robust connector usesdaughtercard plugs with aprinted circuit board (PCB)

wafer design and back-plane receptacles with acompletely enclosed dual-beam design. All signallines use redundant pointsof contact for high reliability.

The MULTIGIG RT Tier 1connector is available forboth 20.32 [.800] and 25.40[1.000] pitch card spacing.The totally modular systemallows flexibility in choosingsignal and power modulesas well as guidance, keying,and electrostatic discharge(ESD) modules to meet themost demanding applica-tions. Signal modules can

be customized for specificelectrical requirements —such as sequencing — thatare critical in high speedapplications.

Power modules are availablewith two- and four-voltageoptions, each circuit capa-ble of carrying 20 amps.The robust metal guide pinprovides eight keyingoptions and a unique ESDcontact to discharge staticwhen daughtercards arehot-plugged.

Availability

Fully validated SPICE models: E-mail requests to [email protected]

Pro/E models and IGES models: E-mail requests to [email protected]

www.te.com

IGES is a trademark of IAMBA Networks,Inc.

PRO/E is a trademark of ParametricTechnology Corp.




MULTIGIG RT Tier 1 Connector System (Continued)

Note: All part numbers are RoHS compliant.

Mechanical DesignSummary

Mechanical Features

� Extremely rugged connectorfor mission criticalapplications

� Three signal sequencinglevels plus an additionalthree power sequencinglevels

� Keyed guide modulesstandard: cannot mateconnector incorrectly, andprovide ± 3 mm of gather

� Options available include:

� Power modules

� Electrostatic dischargeguide pins

� Multiple guide pin keyingoptions

� High signal density: 70 pairsfor differential signals

20.30 [.800] Pitch Connector

Type StyleNo. of Signal PartCols. Pattern Number

Center 16 N/A 1410200-1

Stand Alone 16 N/A 1410420-1

(Backplane) Half Left 8 N/A 1410226-1Receptacle Half Right 8 N/A 1410227-1

Full Left 16 N/A 1410201-1

Full Right 16 N/A 1410202-1

Center16 S.E. 1410205-1

16 Diff. 1410205-2

Stand Alone16 S.E. 1410421-1

16 Diff. 1410421-2

Half Left8 S.E. 1410228-1

(Daughtercard) 8 Diff. 1410228-2Plug

Half Right8 S.E. 1410229-1

8 Diff. 1410229-2

Full Left16 S.E. 1410206-1

16 Diff. 1410206-2

Full Right16 S.E. 1410207-1

16 Diff. 1410207-2

25.40 [1.00] Pitch Connector


Center 16 N/A 1410210-1


(Backplane) Half Left 8 N/A 1410231-1Receptacle Half Right 8 N/A 1410230-1

Full Left 16 N/A 1410211-1


Center16 S.E. 1410215-1

16 Diff. 1410215-2

Stand Alone16 S.E. 1410413-1

16 Diff. 1410413-2

Half Left8 S.E. 1410232-1

(Daughtercard) 8 Diff. 1410232-2Plug

Half Right8 S.E. 1410233-1

8 Diff. 1410233-2

Full Left16 S.E. 1410216-1

16 Diff. 1410216-2

Full Right16 S.E. 1410217-1

16 Diff. 1410217-2

The drawings below show the nominal dimensions for the MULTIGIG RT 1 connector modules

Dim.20.32 [.800] 25.40 [1.000]Connector Connector

A16.10 16.10.630 .630

B21.60 27.40.850 1.080

C18.40 24.20.720 .950

D28.70 28.701.130 1.130

E21.60 27.40.850 1.080

F18.40 24.20.720 .950


R =17.00

R =17.00

AA.067 .067

L =15.20

L =15.20

.600 .600

BB10.50 10.50.410 .410

CC18.60 24.40.730 .960

DD28.70 28.701.130 1.130

EE10.50 10.50.410 .410

FF18.60 24.40.730 .960

A

C

DD EE

FF

AABB

CC

B

D

F

E

Plug (Daughtercard)

Left/Right End Module Center Module

Receptacle (Backplane)

Left Full End Module Right Full End Module

Stand Alone Backplane Stand Alone Daughtercard




MU

LTIG

IGR

TC

onn

ector

5

MULTIGIG RT Tier 2 Connector System

Target Applications

� High speed telecommunica-tions equipment

� Midrange and high-endservers

� Networking equipment

� Blindmate design

� High speed customplatforms



Product Features

� Excellent performance to6.25+ Gb/s–

� High density: 113 contactsper inch provides 56 contactpairs per inch fordifferential signaling

� Options include 20.32[.800] and 25.40 [1.000]pitch card spacing

� Modular options for signal,power, keying and guidance

� Optimized footprints

� Robust design

� Low noise levels

� Supports differential pairwidths of 6 mils with 9 milspacings

� Single-ended, open pinfield and power wafersavailable

The MULTIGIG RT Tier 2connector is the latestproduct release to meetcustomer requirements forhigh-density and high-performance two-pieceinterconnects. In TE andindependent lab tests,the MULTIGIG RT Tier 2connector has performedin excess of 6 Gb/s usingstandard FR-4 board mate-rial and routing techniques,and has been demon-strated to 10 Gb/s.

The MULTIGIG RT Tier 2connector system providesthe flexibility to configurethe daughtercard forDifferential, Single-ended,Open Pin Field, or Power

within a single connectormodule. All of these optionsthen mate into a commonBackplane Receptacle.The robust connector usesdaughtercard plugs with aprinted circuit board (PCB)wafer design and back-plane receptacles with acompletely enclosed dual-beam design. All signallines use redundant pointsof contact for high reliability.

The MULTIGIG RT Tier 2connector is available forboth 20.32 [.800] and 25.40[1.000] pitch card spacing.The totally modular systemallows flexibility in choosingsignal and power modulesas well as guidance, keying,

and electrostatic discharge(ESD) modules to meet themost demanding applica-tions. Signal modules canbe customized for specificelectrical requirements —such as sequencing — thatare critical in high speedapplications.

Power modules are availablewith two- and four-voltageoptions, each circuit capa-ble of carrying 20 amps.The robust metal guide pinprovides eight keyingoptions and a unique ESDcontact to discharge staticwhen daughtercards arehot-plugged.

Availability

Fully validated SPICE models: E-mail requests to [email protected]

Pro/E models and IGES models: E-mail requests to [email protected]

www.te.com

IGES is a trademark of IAMBA Networks,Inc.

PRO/E is a trademark of ParametricTechnology Corp.




MULTIGIG RT Tier 2 Connector System (Continued)


Mechanical DesignSummary

20.30 [.800] Pitch Connector


Center 16 N/A 1410140-1


(Backplane)Half Left 8 N/A 1410186-1

ReceptacleHalf Right 8 N/A *

Full Left 16 N/A 1410141-1


Right End 18 N/A 1410456-1

Center16 S.E. *

16 Diff. 1410137-1

Stand Alone16 S.E. *

16 Diff. 1410134-1

Half Left8 S.E. *

(Daughtercard) 8 Diff. *Plug

Half Right8 S.E. *

8 Diff. *

Full Left16 S.E. *

16 Diff. 1410138-1

Full Right16 S.E. *

16 Diff. 1410139-1

* Contact TE.

25.40 [1.00] Pitch Connector


Center 16 N/A 1410127-1


(Backplane) Half Left 8 N/A *Receptacle Half Right 8 N/A *

Full Left 16 N/A 1410129-1


Center16 S.E. *

16 Diff. 1410123-1

Stand Alone16 S.E. *

16 Diff. 1410132-1

Half Left8 S.E. *

(Daughtercard) 8 Diff. *Plug

Half Right8 S.E. *

8 Diff. *

Full Left16 S.E. *

16 Diff. 1410124-1

Full Right16 S.E. *

16 Diff. 1410125-1

* Contact TE.

The drawings below show the nominal dimensions for the MULTIGIG RT 2 connector modules


A16.10 16.10.630 .630

B21.60 27.40.850 1.080

C18.40 24.20.720 .950

D28.70 28.701.130 1.130

E21.60 27.40.850 1.080

F18.40 24.20.720 .950


R =17.00

R =17.00

AA.067 .067

L =15.20

L =15.20

.600 .600

BB10.50 10.50.410 .410

CC18.60 24.40.730 .960

DD28.70 28.701.130 1.130

EE10.50 10.50.410 .410

FF18.60 24.40.730 .960

A

C

DD EE

FF

AABB

CC

B

D

F

E

Plug (Daughtercard)

Left/Right End Module Center Module

Receptacle (Backplane)

Left Full End Module Right Full End Module

Stand Alone Backplane Stand Alone Daughtercard




MU

LTIG

IGR

TC

onn

ector

5

Connector Selection Grid for VITA 41 VXS Compliant Connectors


Connector Description Part Number

P0Tier 2, 7 Row, Center Module,

1410147-120.30 [.800] Pitch, Right Angle

P5Tier 2, Left End Module,


P4Tier 2, Center Module,


P3Tier 2, Center Module,


P2Tier 2, Right End Module,


P1Tier 1, Monolithic,


Connector Description Part Number

J0Tier 2, Center Module,

1410135-120.30 [.800] Pitch, Vertical

J5Tier 2, Left End Module,

1410141-120.30 [.800] Pitch, Vertical


1410140-120.30 [.800] Pitch, Vertical


1410140-120.30 [.800] Pitch, Vertical

J2Tier 2, Right End Module,

1410142-120.30 [.800] Pitch, Vertical

J1Tier 1, Monolithic Module,

1410420-120.30 [.800] Pitch, Vertical

Product Facts

� 10+ Gbps performance

� Differential, Single-endedand Power


� Backplane connector systemwith “pinless” interface




� Three levels of signalcontact sequencing

� Modular connector system

� Available for 20.30 [.800] or25.40 [1.00] card pitchsystems

� Provides ESD protection

� Complete connector familyincludes…

� Power Modules


The VITA 41 VXS productline is a backplane intercon-nect family that offers flexi-bility and customization.VXS is an ANSI standardthat combines parallelVMEbus technology withenhancements to supportswitched serial fabricsincluding PCI Express,RapidIO, StarFabric andInfiniBand over a new highspeed P0 connector.Backward compatibility ismaintained with existingbackplanes that do not have

a conflicting P0 scheme.Combining the VME2eSSTparallel bus with switchfabric technologies formulti-point, high-speed datatransfers creates choicesfor embedded computingdesigns of all types. Underthe VITA 41 VXS specifica-tion, VMEbus cards (nowcalled “payload cards”) areconnected via a high-speedP0 connector. Each payloadcard has two 4x VXS ports(port A and port B) to con-nect to other boards in the

system. Each VXS port iscomprised of 4 HSS linksrunning at speeds up to2.5Gbps or 3.125Gbps.

Applications

� Military

� Aerospace and Defense

� Rugged, mission criticalapplications


� High-end and mid-rangeservers

� Telecommunicationsequipment

INFINIBAND is a trademark of the

InfiniBand Trade Association.

PCI Express is a trademark of PCI-SIG.

RAPIDIO is a trademark of RAPIDIO, Inc.

STARFABRIC is a trademark ofStarGen, Inc.

VITA, VMEbus, VPX, and VXS aretrademarks of VITA.Check out the websitehttp://www.vita.com/vso-stds.html




Connector Selection Grid VITA 41 VXS Compliant Connectors (Continued)

Note: All part numbers are RoHScompliant.

J1

J0

J2

Right End ModulePart Number1410135-X

P2

P0

P1

VME 64 ExtensionPart Number148452-5

VME 64 ExtensionPart Number1-148445-5

Center ModulePart Number

RT2 1410147-1

Payload Board andPayload Slot

Left End ModulePart Number1410141-1

J5

J4

J3

J2

J1

Full Stand AlonePart Number1410420-1

Power Module

Right End ModulePart Number1410142-1

Center ModulePart Number1410140-1

Center ModulePart Number1410140-1

Left End ModulePart Number

1410138-1P5

P4

P3

P2

P1

Power Module

Full Stand AlonePart Number

1410421-1

Right EndModule

Part Number1410139-1


1410137-1


1410137-1

Switch Board andSwitch Slot





MULTIG

IGRTConnector

5

Connector Selection Grid VITA 41 VXS Compliant Connectors (Continued)


RJ0Part Number

1410474-3

IntegralGuidanceProvided

Latch Cavity ShownMetal Latch for

Cable Assembly Only

Backplane

Rear Transition

ReferenceFront Payload

Backplane

Interim

Solution

RP0Part Number1410473-1

RJ0Part Number

1410992-3

RP0Part Number1410303-1

VXS VMEbusSwitched Serial PayloadRear Transition Module





Connector Selection Grid for VITA 46 VPX Compliant Connectors

Product Facts

� 10+ Gbps performance

� Differential, Single-endedand Power


� Backplane connector systemwith “pinless” interface




� Three levels of signalcontact sequencingModular connector system

� Available for 20.30 [.800] or25.40 [1.00] card pitchsystems

� Provides ESD protection

� Complete connector familyincludes…

� Power Modules


The VITA 46 VPX productline is a backplane intercon-nect family that offers levelsof flexibility and customiza-tion never before seen inthe industry. VPX provideshigh-speed data rates thattraditional VME is notdesigned for; by mergingthe latest packaging andconnector technology withthe latest bus and serialtechnology.

This printed circuit based,pinless, interconnect familyis comprised of modularcomponents which can beused in a variety of combi-nations. VPX dramaticallyincreases bandwidth withfewer pin counts andenables heterogeneousarchitectures to help pre-serve existing investmentsin technology and systems.The MULTIGIG RT productoffers new 7-row high-speed connector modulesthat support VPX data rates.

Applications

� Military

� Aerospace and Defense

� Rugged, mission criticalapplications


� High-end and mid-rangeservers

� Telecommunicationsequipment





MU

LTIG

IGR

TC

onn

ector

5

Connector Selection Grid for VITA 46 VPX Compliant Connectors (Continued)


P0Left End

Half ModulePart Number

1410189-3Utility

J0Left End


1410186-1

J1Center ModulePart Number

1410140-1


1410140-1


1410140-1


1410140-1

J6Right End Module


J2Right End

ModulePart Number

1410142-1

P1Center ModulePart Number

1410187-3Differential



orPart Number

1410190-3Single-Ended

(5:2)



orPart Number


(5:2)



orPart Number


(5:2)



orPart Number


(5:2)

Keying GuideModule

Part Number1-1469492-X

Daughtercard Backplane



orPart Number


(5:2)

Keying GuideModule


Keying GuideModule


Keying Guide PinPart Number1-1469491-X



VITA 46 VPXCompliant Connectors







P0Left End


1410189-3Utility

J0Left End


1410186-1


1410140-1


1410140-1


1410140-1


1410140-1

J6Right End Module


J2Right End

ModulePart Number

1410142-1





orPart Number


(5:2)



orPart Number


(5:2)



orPart Number


(5:2)



orPart Number


(5:2)

Keying GuideModule


Payload Card

Rear TransitionModule

Backplane



orPart Number


(5:2)

Keying GuideModule


Keying GuideModule


Keyed Guide Pin KitPart Number

1410956-1

Keyed GuidePin Kit



1410956-1

Rear Transition Module





MULTIG

IGRTConnector

5



RP1Center ModulePart Number


orCenter ModulePart Number

1410970-3



orRight End Module


Single Ended




1410190-3Single Ended




1410190-3Single Ended


1410975-3or


1410190-3

RP2Left End


1410971-3or


1410972-3

Keying GuideModule


Keying GuideModule


Keying GuideModule



1410968-3


1410956-1


1410956-1


1410956-1

RJ0Center ModulePart Number

1410964-1or


1410965-1


1410966-1or


1410140-1


1410140-1


1410140-1


1410140-1

RJ2Right End


1410186-1

RJ3Right End

ModulePart Number

1410142-1

Payload Card

Rear TransitionModule

Backplane

Rear Transition Module(Continued)





“NEW” MULTIGIG RT Stacking Connector

Note: All part numbers are RoHScompliant.

Product Facts

� Variable Stack Height25mm to 45mm+

� Interposer Part Numbers

� 1410195-1 (Spaced for30mm stack height)

� 1410196-1 (Spaced for30mm stack height)

� 14101XX-1* (Spaced forany specification needed)

� Modular Construction

� 0.8 inch (85 single endedlines/inch; 43 differentialpairs/inch) (Availabletoday)

� 1.0 inch (113 singleended lines/inch;56 differential pairs/inch)

� Wafer Configurations

� Differential

� Open Pin Field

� Power

� Electrical performancebased on MULTIGIG RTTier 2 product construction(10 Gig performance)

� Compliant Pin Technology(Flat Rock Board Assembly)

� Qualified Interface

� MULTIGIG RT Tier 2product (ProductSpecification 108-2072)

� Qualification Report501-544

*Typically less than $10,000 NREand 6 weeks lead time

MULTIGIG RT Stacking Connectors are customizable to any stack heights needed.*

.8" Pitch — MULTIGIG RT Stacking Connector

Dimensions MatedPart Number

A B Stack Height

21.00 20.00 30.001410195-1

.827 .787 1.181

33.00 32.00 42.001410196-1

1.299 1.260 1.654

Mating 20.30 [.800] Pitch Receptacles found on page 148.

18.40[.724]

13.50[.531]

15 Plcs.

Column 1Indicator

Column 1Indicator

1.80[.071] A

B

28.68[1.129]

NEW!




MULTIG

IGRTConnector

5

Power Modules and Guide Hardware Reference

Note: All part numbers are RoHScompliant. Tin-Lead parts areRoHS compliant throughexemption for lead in press-fitconnectors.

13.70[.539]

3.60[.142]

Ref.

3.00[.118]

2.00[.079]Typ.

Mating Point

Pin 1a

Typ.

8.45[.338]

15.25[.600]

3.50[.138]

2.00[.079]

0.75[.030]2 Plcs.

Ref.

3.18[.125]

16.25[.640]

Housing

Contact

Section Y-Y

Y

Y

3.00[.118]

1.625[.064]

3.60[.142]

4 Plcs.

PlatedThrough Hole

12 Plcs.

Mating HeaderFootprint

Center Lines

Daughter CardPrimary Side

ConnectorOutline

Recommended PCB Hole Layout

1

PCB Hole Dim. Drilled Hole = 0.70 ± 0.02 [.028 ± .001]Finished Hole = 0.60 ± 0.05 [.024 ± .002]Cu Thickness = 0.025 – 0.50 [.0010 – .020]

SnPb Thickness = 0.015 [.0006] Max.

1

13.70[.539]

3.60[.142]

Ref.

3.00[.118]

2.00[.079]Typ.

Mating Point

Pin 1a

Typ.15.65[.616]

15.25[.600]

3.50[.138]

2.00[.079]

0.75[.030]4 Plcs.

Ref.

3.18[.125]

16.25[.640]

Housing

Contact

Section Y-Y

Y

Y

3.00[.118]

1.625[.064]

3.60[.142]

4 Plcs.

PlatedThrough Hole

24 Plcs.

Mating HeaderFootprint

Center Lines

Daughter CardPrimary Side

ConnectorOutline


3 Plcs.

1

PCB Hole Dim. Drilled Hole = 0.70 ± 0.02 [.028 ± .001]

Finished Hole = 0.60 ± 0.05 [.024 ± .002]Cu Thickness = 0.025 – 0.50 [.0010 – .020]

SnPb Thickness = 0.015 [.0006] Max.

1

Part Number 1410278-1

2-Position VerticalReceptacle

Part Number 1410270-1

4-Position VerticalReceptacle




Power Modules and Guide Hardware Reference (Continued)

Note: All part numbers are RoHS compliant. Tin-Lead parts are RoHScompliant through exemption for lead in press-fit connectors.

14.70[.579]

1

18.00[.709]

Ref.

Pin 1a

17.80[.701]

5.50[.217]

2.00[.079]

3.50[.138]

Ref.Typ.

33.38[1.314]

HousingContact

Section Y-Y

Y

Y 3.60[.142]

3.60[.142]

5 Plcs.

Plated Through Hole

24 Plcs.

Primary Sideof Backplane

ConnectorOutline


3 Plcs.

1

PCB Hole Dim. Drilled Hole = 0.70 ± 0.02

[.028 ± .001]Finished Hole = 0.60 ± 0.05

[.024 ± .002]Cu Thickness = 0.025 – 0.50

[.0010 – .020]SnPb Thickness =

0.015 [.0006] Max.

1

2.00[.079]Typ.17.75

[.699]

DaughtercardEdge

6.00[.236]

Ref.

5.50[.217]Ref.

18.40[.724]

L 2 3 4

14.70[.579]

18.00[.709]

Ref.

Pin 1a

10.60[.417]

5.50[.217]

2.00[.079]

3.50[.138]

Ref.Typ.

33.38[1.314]

Housing

Section Y-Y

Y

Y 3.60[.142]

3.60[.142]

5 Plcs.

Plated Through Hole

12 Plcs.

Primary Sideof Backplane

ConnectorOutline


3 Plcs.

1

PCB Hole Dim. Drilled Hole = 0.70 ± 0.02

[.028 ± .001]Finished Hole = 0.60 ± 0.05

[.024 ± .002]Cu Thickness = 0.025 – 0.5

[.0010 – .020]SnPb Thickness =

0.015 [.0006] Max.

1

2.00[.079]Typ.17.75

[.699]

DaughtercardEdge

6.00[.236]

Ref.

5.50[.217]Ref.

18.40[.724]

1ContactL 2

Part Number 1410271-X

4-Position Right Angle Plug

Part Number 1410279-X

2-Position Right Angle Plug

Dim. L Part

Circuit 1 Circuit 2 Number

13.75 13.751410279-1

.541 .541

13.75 12.251410279-2

.541 .482

13.75 10.751410279-3

.541 .423

10.75 10.751410279-4

. 423 .423

12.25 10.751410279-5

.482 .423

12.25 12.251410279-6

.482 .482

Dim. L Part

Cavity 1 Cavity 2 Cavity 3 Cavity 4 Number

13.75 13.75 13.75 13.751410271-1

.541 .541 .541 .541

12.25 13.75 13.75 12.251410271-2

.482 .541 .541 .482

12.25 13.75 13.75 10.751410271-3

.482 .541 .541 .423

10.75 13.75 13.75 10.751410271-4

. 423 .541 .541 .423

12.25 13.75 12.25 10.751410271-5

.482 .541 .482 .423

12.25 12.25 12.25 12.251410271-6

.482 .482 .482 .482

10.75 12.25 12.25 10.751410271-7

. 423 .482 .482 .423

10.75 10.75 10.75 10.751410271-8

. 423 . 423 . 423 .423

10.75 13.75 12.25 10.751410271-9

. 423 .541 .482 .423

12.25 10.75 10.75 12.251-1410271-0

.482 . 423 .541 .482




MULTIG

IGRTConnector

5



Mounting Screw for9.0 mm Guide ModulesPart Number 1410946-1and 5.0 mm Guide ModulesPart Number 1410946-2

1.50[.059]

Ø 5.50[.217]

0.50[.020]

Max.3.50[.138]

7.2 mm Wide, No Key7.08[.279]

7.30[.287]

7.40[.291]

4.10[.161]

AcrossFlats

18.60[.732]

1.85[.073]

25.33[.997]

8.35[.329]

30°0'Ref.

- Z -- Z -CL of

A

Pin Part Number 1-1410710-X

7.10[.280]

31.88[1.255]

18.40[.724]

4.00[.157]

3.70[.146]

15.63[.615]

10.50[.413] 3.88

[.153]

Guide Module Part Number 1410714-2

9.0 mm Wide, with Keying

7.40[.291]

24.00[.945]

Ø 9.00[.354]

2.00[.079]

1.50 ± 0.03

[.059 ± .001] G

Pin Part Number 1-1469491-X

5.00[.197]

12.48[.491]

5.50[.217]

5.50[.217]

5.25[.207]

MeasuredCounterclockwise

Top ofMotherboard

Edge ofDaughtercard

2 Plcs.

1.30 ± 0.10

[.051 ± .004]

2.70 ± 0.08

[.106 ± .003]

Ø 4.65 ± 0.05

[.183 ± .002]

Ø 3.00 ± 0.05

[.118 ± .002]

2.70[.106]

9.78[.385]

12.50[.492]

Max.

4.75[.187]

5.50[.217]

+ 0.05– 0.13+ .002– .005

9.00

[.354 ]

22.75[.896]

ESD Orientation

A

Guide Module Part Number 1-1469492-X

Dim. A Part Number

8.721-1410710-1

.343

10.001-1410710-2

.394

11.601-1410710-3

.457

13.101-1410710-4

.516

Dim. G Part Number

2.601-1469491-2

.102

4.201-1469491-3

.165

5.701-1469491-4

.224Dim. A Part Number

0° 1-1469492-1

45° 1-1469492-2

90° 1-1469492-3

270° 1-1469492-7

315° 1-1469492-8

No Key 1-1469492-9






7.40[.291]

32.00[1.260]

Ø 10.00[.394]

2.00[.079]

1.50 ± 0.03

[.059 ± .001] G

Pin Part Number 1410548-3 Pin Part Number 1-1410773-X

10.8 mm Wide, GuideModule, with Keying, withESD Contact

5.00[.197]

6.00[.236]

16.13[.635]

MeasuredCounterclockwise

Top of Motherboard

Edge of DaughtercardTyp.

Ref.

3.70[.146]

Ø 7.70 [.303]

4.00[.157]2 Plcs.

12.50[.492]

12.25[.482]

5.00[.197]

5.63[.222]

10.70[.421]

18.40[.724]

5.50[.217]

31.88[1.255]

8.10[.319]

12.25[.482]Ref.

5.63[.222]

HousingContact, ESD

ESD Orientation

2 Plcs.Ø 3.96 ± 0.05

[.156 ± .002]

Ø 3.96 ± 0.05

[.156 ± .002]

A

Guide Module Part Number 1-1410297-X

5.70[.224]

32.00[1.260]

28.95[1.140]

Ø 10.00[.394]

4.65[.183]

6.99[.275]

1.50[.059]

6.50[.256]

Ø 5.55[.219]

Dim. A Part Number

0° 1-1410297-1

45° 1-1410297-2

90° 1-1410297-3

135° 1-1410297-4

180° 1-1410297-5

225° 1-1410297-6

270° 1-1410297-7

315° 1-1410297-8

No Key 1-1410297-9

Dim. G Part Number

2.601-1410773-2

.102

4.201-1410773-3

.165

5.701-1410773-4

.224