eng pacemaker manual 2.0

8/14/2019 Eng Pacemaker Manual 2.0

http://slidepdf.com/reader/full/eng-pacemaker-manual-20 1/30

User’s Manual Version 2.0



Tb tt

1 sysTem requiremenTs 1

1.1 Mac 11.2 PC 1

2 supporTed audio ormaTs 1

3 inTerace and uncTions 2

3.1 Basic unctions 2

3.2 Extended unctions 3

3.3 Monitoring unctions 3

3.4 Display layout 4

4 GeTTinG sTarTed 5

5 conTrollinG The Two channels 5

6 naviGaTion and Track selecTion 6

7 mix uncTionaliTy 7

7.1 Set cue point 7

7.2 Adjust BPM 8

7.3 Crossader and lineout 8

7.4 Beatmatch 8

7.5 Headphones monitoring 9

7.6 Headphones volume control 9

7.7 Adjust track EQ and gain 10

7.8 Adjust colour FX 10

7.9 Adjust beat FX 10

7.10 Adjust key FX 11

7.11 Kill-all eects 12

7.12 Reverse play 12

7.13 Set loop 12

7.14 Adjust loop 13

7.15 Split/double loop 13

8 recordinG mixes 14

9 creaTinG and manaGinG cases 15

10 adjusT seTTinGs 17

10.1 Mix control settings 17

10.2 Audio settings 18

10.3 Congure settings 1810.4 Power settings 19

10.5 Mix mode settings 20

10.6 Play mode settings 20

11 charGinG 21

12 compuTer soTware 22

13 supporT 24

14 saeTy insTrucTions and reGulaTion ino 24

14.1 The FCC compliance statement 26

14.2 Industry Canada Statement 26

14.3 Korea Class B statement 26

14.4 VCCI Class B statement 2614.5 Notice regarding disposal (EU only) 27



1

1 sytem requirement

1.1 Mac

• Macwithbuilt-inUSB2.0port• MacOSXv10.4.4orlater( Intel )

• PacemakerEditorforMac

1.2 PC

• PCwithbuilt-inUSB2.0port• WindowsXPHomeorProfessionalorVista• PacemakerEditorforWindows

Pacemaker Editor is included on the Pacemaker device hard-drive.

To download the latest version, go to www.pacemaker.net/products/editor

2 supported audio format

•MP3up( to 320 kbps ), M4A ( AAC-LC ),AIFF,FLAC,WAV,OggVorbisandSND



2

3 it t

3.1 Basic unctions

1 d2 r search or skip track3 search or skip track4 c 1 select or input5 c 2 select or input

6 p play or pause track7 c set or launch at cue point8 c ch1/ch2 lineout blend9 m enter or exit music library

10 T navigate or adjust11 sttg12 usB t13 k- deactivate or relaunch eects14 p t15 lt t16 p t

5

8

9

7

1614

10

6

4

2

1

11 12 13

15

3



3

3.2 Extended unctions

WiththeP-switchheldup.

3.3 Monitoring unctions

WiththeP-switchhelddown.

1 p-t enable extended input2 r set/adjust loop in-point;

split/double loop3 set/adjust loop end-point;

split/double loop4 c 1 view time played/time let5 c 2 view time played/time let6 p reverse play7 c exit/re-enter loop8 T navigate/adjust

1

4

3

2

1 p-t access monitoring unctions2 p instantly sync track BPM and

phase with parallel channel3 c ch1/ch2 headphone blend4 T adjust phones volume

3

6

5

7

8

1

2

4



4

3.4 Display layout

1 Track time2 VU meter3 Track tempo change4 Current track BPM5 Playback status6 Engaged eects7 Artist, track title and album8 Beat graph (ch1 and ch2)9 Power status

Adrian Lux feat. Name...

Club Kid

(Pacemaker)

+0.83%

127

-01:43 02:31

127.1

Active channel’s ino displayed(in this example; ch1)



5

4 Gttg tt

Tg

To turn on your Pacemaker, press the settings button.

Tg

To turn o your Pacemaker, press the settings button and select shutdownrom the menu.

Alternatively, press settings or more than our seconds.

5 ctg t t

Pacemaker’s two independent audio channels let you play two tracks side by side.Select a channel and do your creative adjustments on-the-fy.

ctg t t t

To activate and control a channel, press the appropriate channel button.

• Theselectedchannelisactivatedandinformationaboutitishighlightedonthedisplay.

• Anyinputwillaffecttheactivechannelonly.• Adjustmentsonthecrossfaderwillaffecttheaudiooutputblendbetweenboth

channels.• Tocontroltheotherchannel,simplypresstheappropriatechannelbuttonto

activate it.



6

6 ngt t t

st t

1. Double-tap the centre o the touchpad to access the track list.2. Stroke the touchpad vertically to move the cursor up and down the list.3. Press play to load and start playback o the selected track.

ot:

• Pressforwardorrewindbuttontomovetothenextorpreviousletterinthetracklist (eective only when the track list is sorted alphabetically).

• Tapnorthorsouthtomovestep-by-stepalongthelist.• Presscuetoloadthetrackascuedatrstbeat.• Swipethetouchpadhorizontallytoloadthetrack.Dependingonwhetherthe

setting autocue is enabled or not, the track is cued or playback is started.• Tapwestoreasttoloadthetrack.Dependingonwhetherthesettingautocueis

enabled or not, the track is cued or playback is started.

a t t t

1. Enter the track list by double-tapping the centre o the touchpad.2. Press and hold the P-switch up to access track list lters.3. Navigate between the dierent lters by sliding your nger let or right on the

touchpad. By deault you can lter on Case, Mix, Genre, Artist, Album, and BPMor any combination o these. Additional lters that can be optionally activatedthrough the settings menu include Remix, Label, Year, Added, Key, Rating, Type,and Bitrate.

4. Browse through the active lter criteria by stroking up or down on the touchpad.5. Select and apply a lter by swiping let or right on the touchpad.6. Release the P-switch to access the ltered out track list.

ot:• Tapwestoreasttonavigatebetweenthedifferentlters.• Tapnorthorsouthtomoveincrementallyupordownbetweentheactivelter

criteria.

st t t t t t

1. Browse through the active lter criteria by sliding your nger up or down on thetouchpad.

2. Select multiple lters by pressing cue or the items that you want to add.(Applied lters are highlighted.)

db t

Disable a previously selected lter by pressing cue or that entry. Disable all

previously selected lters by selecting the < All > entry in the active lter list.

Each channel’s track list is by deault independent. A linked track list common or both channels can be optionally enabled in the settings menu.



7

7 m tt

WithallthefunctionalityofastationaryDJset-upandafullsetofprofessional

audio eects together with superior monitoring unctions, Pacemaker gives youunlimited creative infuence over your music.

7.1 Set cue point

st t t

1.Withatrackplayingontheactivechannel,pressplaytoDJ-pausethetrackatits current position

• Thetrackisstutteringatitscurrentposition.• Theplayandcuebuttonsareblinking.• TheDJ-pausesymbolisdisplayedatthetopcentreofthedisplay.

2. Move the track playback position ast orwards or backwards by pressing andholding orward or rewind.

• Thetrackisstutteringatitsmovingposition.• Theplayandcuebuttonsareblinking.• Theforwardorrewindsymbolisdisplayedatthetopcentreofthedisplay.

3. Adjust the current playback position orwards or backwards by searching/ stroking along the touchpad rim.

• Thetrackisstutteringatitsmovingposition.• Theplayandcuebuttonsareblinking.• TheDJ-pausesymbolisdisplayedatthetopcentreofthedisplay.

4. Set the cue point by pressing cue.

• Thetrackiscuedatitscurrentposition.• Thecuebuttonislit.• Thecuesymbolisdisplayedatthetopcentreofthedisplay.

5.Withasetcuepoint,youcanoptionally:• Revertaplayingtracktothesetcuepointbypressingcue.• Playthetrackfromthesetcuepointbypressingandholdingcue.Thetrackwill

be cued again when you release cue. The track will continue to play when press-ing play beore releasing cue.

Vinyl style pause can be optionally enabled in the settings menu.

Only one user-defned cue point can be set per track. Loading a new track will

remove the previously set user-defned cue point.

When autocue is enabled, Pacemaker cues tracks at frst beat. Autocue can beoptionally disabled in the settings menu.

Cue points can be defned in the Editor. When transerring tracks rom the Editor toPacemaker, the defned cue points will remain set until altered; on the Pacemaker or in the Editor.



8

7.2 Adjust BPM

cg t

WiththeP-switchheldup,strokealongthetouchpadrimclockwiseoranti-

clockwise to increase or decrease the tempo.• Thetracktempoischanged.• Therelativetempochangeisshownonthedisplay.• TheBPMvalueofthetrackischanged.• ThecurrentBPMvalueisshownatbottomofthedisplay,ontheactivechannel.• Whenyou’rehappy,releasetheP-switch.

B

Stroke switly along the touchpad rim to temporarily accelerate or decelerate thetrack tempo.• Thetracktempoistemporarilychanged.

Bend pitch can be optionally enabled in the settings menu.

7.3 Crossader and lineout

st t t t 1

Slide your nger along the crossader rom right to let and position the crossadeindicator at maximum let.• Onlychannel1isheardthroughthelineoutoutput.

st t t t 2

Slide your nger along the crossader rom let to right and position the crossadeindicator at maximum right.• Onlychannel2isheardthroughthelineoutoutput.

st t t t b 1 t 2

Slide your nger along the crossader and position the crossade indicatorbetween the channels.• Ablendofchannel1andchannel2,correspondingtothecrossfadeindicator

position, is heard through the lineout output.

You can crossade between channel 1 and channel 2 independent o whichchannel is currently active.

The crossader action is relative; you can place your fnger at any position on thecrossader, and the crossade indicator position will change relative to the input.

Optional crossader types can be enabled in the settings menu.

7.4 Beatmatch

at btt

Withtracksplayingonbothchannels,pressandholdtheP-switchdownandpress play to instantly sync the tempo and phase o the track on the active channelwith the track on the passive channel. This one-click operation can be perormedat anytime when two tracks are playing.

Bt g

Whentracksareplayingonbothchannelsyoucanmonitortempoandphasesync

via the beat graph.



9

I the white bars in the beat graph are driting to the right, the tempo o the trackplaying on the active channel is higher than the track playing on the passive channel.• Lowerthetempoofthetrackontheactivechanneluntilthewhitebarsstopdrifting.

I the white bars in the beat graph are driting to the let, the tempo o the trackplaying on the active channel is lower than the track playing on the passive channel.• Increasethetempoofthetrackontheactivechanneluntilthewhitebarsstops

driting.

I the white bars are not aligned with the grey bars in the beat graph, the phase othe track playing on the active channel is not synced with the track playing on thepassive channel.• Bendthetrackaccordinglyuntilthewhitebarsarealignedwiththegreybars.

When the white bars in the beat graph stop driting, the BPM o the two tracks onthe two channels match.

When the white bars are aligned with the grey bars in the beat graph, the phaseo the track on the active channel is synced to the track on the passive channel.(Use your ears to identiy the downbeat when necessary.)

Monitor the beat graph to adjust tempo and phase during playback.

7.5 Headphones monitoring

st t tg t 1

WiththeP-switchhelddown,slideyourngeralongthecrossfadertopositionthe crossade indicator at maximum let.•Onlychannel1isheardthroughthephonesoutput.

st t tg t 2

WiththeP-switchhelddown,slideyourngeralongthecrossfadertopositionthe crossade indicator at maximum right.•Onlychannel2isheardthroughthephonesoutput.

st t tg t b bt 1 2

WiththeP-switchhelddown,slideyourngeralongthecrossfadertopositionthe crossade indicator between the channels.•Ablendofchannel1andchannel2,correspondingtothecrossfadeindicator

position, is heard through the phones output.

You can control the visual behaviour o the headphones crossader via the

settings menu.

7.6 Headphones volume control

at t t tt

WiththeP-switchhelddown,strokealongthetouchpadrimclockwiseoranti-clockwise to increase or decrease the volume.

You can control the volume level o the lineout via the settings menu.



10

7.7 Adjust track EQ and gain

at t eq g

Place your nger in the middle o the touchpad and swipe north, east, south or

west,dependingonwhatyouwanttoadjust.Whenyourngerreachestherimofthe touchpad, you can alter the value o the selected audio eect by stroking alongthe rim in either direction.

Adjustments must be perormed as one continuous gesture without releasing your fnger rom the touchpad.

EQ and gain level adjustments only apply to the current track. Loading a new track will reset the EQ and gain level parameters to their deault values.

You can combine all the dierent levels by changing them one at a time.

The location o the audio eects on the touchpad can be confgured via the

settings menu.

7.8 Adjust colour FX

ab t

PacemakerletsyouaddHi-cut/lo-cutlter,Wah,andCrushcoloureffects.Theeects are accessed at locations on the touchpad that can be congured throughthesettingsmenu;bydefaulttheHi-cut/lo-cutlterislocatedatwest.(WahandCrush are not enabled by deault; but can be optionally enabled and assigned viathe settings menu.)

a h-t/-t t

1.WiththeP-switchheldup,swipefromcentretowestonthetouchpad• Thecurrentlterparametervalueisdisplayed.

2.Withoutreleasingyourngerfromthetouchpad,strokealongtherimclockwiseor anti-clockwise to increase or decrease the value.

3.Whenyou’rehappy,releaseyourngerfromthetouchpad.


FX adjustments only apply to the current track. Loading a new track will reset theFX parameters to their deault values.

The location o the audio eects on the touchpad can be confgured via the settings menu.

7.9 Adjust beat FX

ab t

Pacemaker lets you add Roll, Echo, Reverb, Trans, and Delay beat eects. Beateffectsareadjustedthroughtwoparameters;dry/wetandtime(orsize).Theeects are accessed at locations on the touchpad that can be congured throughthe settings menu; by deault Reverb is located at north/top, Roll at east andEcho at south. (Trans and Delay are not enabled by deault; but can be optionallyenabled and assigned via the settings menu.)



11

at t t/z t t

1.WiththeP-switchheldup,swipetwicefromcentretoeastonthetouchpadtosetRolltime,tosouthtosetEchotime,ornorthtochangetheReverbsize.

• Thecurrenttime(orsize)valueisshownonthedisplay.

2.Withoutreleasingyourngerfromthetouchpad,strokeclockwiseoranti-clock-wise along the rim to increase or decrease the value.


at t /t t t

1.WiththeP-switchheldup,swipefromcentretoeastonthetouchpadtoset dry/wet Roll, south to set dry/wet Echo, or north to set dry/wet Reverb.

• Thecurrentdry/wetvalueisshownonthedisplay.

2.Withoutreleasingyourngerfromthetouchpad,slidethengerclockwiseoranti-clockwise along the rim to increase or decrease the value.



FX adjustments only apply to the current track. Loading a new track will reset theFX parameters to their deault values.

Only one beat eect at the time can be activated (with Trans being the exception).

The location o the audio eects on the touchpad can be confgured via the set-tings menu.

7.10 Adjust keyThere are two ways to manipulate the key o a track; you can transpose a trackkey one octave (up/down) in increments o haltones; or you can tune a track pitchin percent o one haltone (up/down). The Key eect has no assigned deaultlocation on the touchpad. It can be assigned to any spot on the touchpad via thesettings menu.

at t k t t

1. Swipe rom the centre to the allocated spot on the touchpad to set the Keyvalue.

• Thecurrentkeyisshownonthedisplay.

2.Withoutreleasingyourngerfromthetouchpad,strokeclockwiseoranti-clock-wise along the rim to alter the key value up or down.


at t k t t

1. Swipe twice rom the centre to the allocated spot on the touchpad to set Keypitch value.

• Thecurrentpitchvalueisshownonthedisplay.

2.Withoutreleasingyourngerfromthetouchpad,strokeclockwiseoranti-clock-wise along the rim to alter the pitch value up or down.


Key adjustments only apply to the current track. Loading a new track will reset the key parameters to their deault values.



12

The location o the audio eects on the touchpad can be confgured through the settings menu.

7.11 Kill-all eectsitt tt t tt

1. Press kill-all to instantly deactivate EQ, colour and beat FX adjustments.2. Press kill-all again to relaunch deactivated EQ, colour and beat FX adjustments.

I you alter EQ, colour and/or beat FX parameters ater pressing kill-all, you can no longer revert to previous EQ and FX adjustments.

Kill-all will not aect Gain or Key adjustments.

7.12 Reverse play

r b t

WiththeP-switchheldup,pressplay.• Thetrackplaybackdirectionisreversed.• Theplaybuttonisblinking.• Thereversesymbolisdisplayedatthetopcentreofthedisplay.

rt t b t

WiththeP-switchheldup,pressplay.• Thetrackplaybackdirectionisreturnedtonormalforwardplaybackdirection.• Theplaybuttonislit.• Theplaysymbolisdisplayedatthetopcentreofthedisplay.

7.13 Set loop

st -t

1.WiththeP-switchheldup,pressrewindtosettheloopin-point.• Therewind(loopin-point)buttonislit,whiletheforward(loopend-point)button

is blinking.• Theloopsymbolisblinkingatthetopcentreofthedisplay.

st -t

2.WiththeP-switchstillheldup,pressforwardtosettheloopend-point.3. Release the P-switch.• Theloopisnowsetandthetracksegmentloopsbetweenthesetin-point

and end-point.• Thecue,forwardandrewindbuttonsareblinking.• Theloopsymbolisdisplayedatthetopcentreofthedisplay.

et

4.WiththeP-switchheldup,presscue.• Thetrackwillassumenormalplaybackfromthepreviouslysetloopend-point.• Thecuebuttonisblinking.• Theplaysymbolisdisplayedatthetopcentreofthedisplay.

r-t

5.WiththeP-switchheldup,presscue.• Thetracksegmentloopsbetweenthepreviouslysetin-pointandend-point.

• Thecue,forwardandrewindbuttonsareblinking.• Theloopsymbolisdisplayedatthebottomcentreofthedisplay.



13

The loop will be cancelled i you perorm one o the ollowing actions between setting the loop in-point and end-point: Release the P-switch, reverse the playingdirection, or change the tempo.

A loop is automatically exited i you cue, ast orward or rewind a track within an activated loop.

Once defned, a loop is permanently saved and can be re-activated even ater another track has been loaded.

You can only have one loop per track. I you set a new loop in a track, the previous loop defnition is overwritten.

7.14 Adjust loop

at t -t tt

1.WiththeP-switchheldup,pressrewind(loopin-point).• Theforwardbuttonislit,whiletherewindbuttonisblinking.

2. Keep the P-switch held up and search/stroke along the touchpad rim clockwiseor anti-clockwise to move the in-point orward or backward.

3.Whenyou’rehappy,releasetheP-switch.

at t -t tt

1.WiththeP-switchheldup,pressforward(loopend-point).• Therewindbuttonislit,whiletheforwardbuttonisblinking.

2. Keep the P-switch held up and search/stroke along the touchpad rim clockwiseor anti-clockwise to move the end-point orward or backward.

3.Whenyou’rehappy,releasetheP-switch.

Loop adjust is only possible while looping.

7.15 Split/double loop

st b ttg t t t -t t t -t

1.WiththeP-switchheldup,pressandholdrewind(loopin-point).2. Keep the P-switch held up and rewind pressed, while pressing and releasing

orward to move the end-point halway towards the in-point.3. Repeat pressing and releasing orward or urther splitting o the loop.4.Whenyou’rehappy,releasetherewindbuttonortheP-switch.

lgt t b bg t t t -t t t -t

1.WiththeP-switchheldup,pressandholdforward(loopend-point).2. Keep the P-switch up and orward pressed, while pressing and releasing

rewind to double the distance rom the in-point to the end-point.3. Repeat pressing and releasing rewind or urther doubling o the loop.4.Whenyou’rehappy,releasetheforwardbuttonortheP-switch.

st b ttg t t t -t t t -t

1.WiththeP-switchheldup,pressandholdforward(loopend-point).2. Keep the P-switch held up and orward pressed, while pressing and releasing

rewind to move the in-point halway towards the end-point.

3. Repeat pressing and releasing rewind or urther splitting o the loop.4.Whenyou’rehappy,releasetheforwardbuttonortheP-switch.



14

lgt t b bg t t t -t t t -t

1.WiththeP-switchheldup,pressandholdrewind(loopin-point).2. Keep the P-switch up and rewind pressed, while pressing and releasing

orward to double the distance rom the end-point to the in-point.

3. Repeat pressing and releasing orward or urther doubling o the loop.4.Whenyou’rehappy,releasetherewindbuttonortheP-switch.

A set loop will continue looping until it is exited.

A split loop can only be doubled up to its original length.

Splitting and doubling a loop is only possible while looping.

8 rg AnymixcanbesavedonyourPacemaker.Whentransferringyourmixestothe Pacemaker Editor, you can edit and rene your mixes as you like. You can alsoupload your mixes on the Internet and let anyone listen anytime.

stt g

WheninMixmode,selectSettings>Mixsave>.

st g

Select Settings > Mix save > and choose rom ‘Save’, ‘Discard’ or ‘Cancel’.

ht Select Settings > Halt > and then select option in the menu and swipe right.1. Continue > to continue mixing.2. Save > to save the current mix.3. Lock > to lock the device rom input.4. New > to start recording a new mix.



15

9 ctg gg

You can create and manage cases (playlists) with your Pacemaker, letting you

group music at your preerence. Cases can be transerred to and rom thePacemaker Editor or playback and editing.

ct

1. Enter the track list by double-tapping the centre o the touchpad.2. Select a track that you want to add to the case.3. Press the settings button.• Atracklistcontextmenuisdisplayed.

4. In the track list context menu, select Add to case > and then swipe right onthe touchpad.

• AnAddtocasemenuisdisplayed.

5. In the Add to case menu select Create case > and then swipe right on thetouchpad.

•Anewcaseiscreated.

6. In the Add to case menu select the newly created case and then swipe righton the touchpad.

•Theselectedtrackisaddedtothecase.

7. Press the settings button to exit the track list context menu at any time.

ot:

• SelectAddalltocase>inthetracklistcontextmenutoaddalltracksintheltered track list to the case.

a t t tg

1. Enter the track list by double-tapping the centre o the touchpad.2. Select a track that you want to add to the case.3. Press the settings button.• Atracklistcontextmenuisdisplayed.

4. In the track list context menu select Add to case > and then swipe right onthe touchpad.

• AnAddtocasemenuisdisplayed.

5. In the Add to case menu select My cases > and then swipe right on thetouchpad.

• AMycasesmenuisdisplayed.

6. In the My cases menu select your desired case and then swipe right on thetouchpad.

• Theselectedtrackisaddedtothecase.

7. Press the settings button to exit the track list context menu at any time.

ot:

Select Add all to case > in the track list context menu to add all tracks in theltered track list to the case.



16

r t

1. Enter the track list by double-tapping the centre o the touchpad.2. Press and hold the P-switch up to access track list lters.3. Navigate to the Case lter.

4. Select the case that you want to edit and release the P-switch to access theltered out track list.5. Select the track that you want to remove rom the case.6. Press the settings button.• Atracklistcontextmenuisdisplayed.

7. In the track list context menu select Remove > and then swipe right on thetouchpad.

• ARemovefromcasemenuisdisplayed.

8. In the Remove rom case menu conrm by selecting Remove > and swipe righton the touchpad.

• Theselectedtrackisaddedtothecase.



17

10 at ttg

a ttg

Withatrackloaded,pressandreleasethesettingsbutton.

at t

This setting lets you adjust the master volume output or lineout.1. Select Settings > Volume > by stroking right, and continuing stroking along

the touchpad rim to desired level.

v tt

1. Select Settings > About > Status >.

rt p ttg

1. Select Settings > Restore all >.• Allpreferencesandsettingsarerestoredtodefaultfactorysettings.

• Yourtracksandmixeswillnotbeeffected.

10.1 Mix control settings

dtt/tt t

This setting lets you select to disallow/allow loaded tracks to be cued at rst beat.1.WheninMixmode,selectSettings>Mixcontrol>Autocue>.2.TogglebetweenOff/Onbyswipingright.

dtt/tt t

This setting disallows/allows loop in-point to push end-point and vice versa.1.WheninMixmode,selectSettings>Mixcontrol>Looptravel>.

2.TogglebetweenOff/Onbyswipingright.

dtt/tt t tt

This setting disallows/allows track key to be independent o track tempo.1.WheninMixmode,selectSettings>Mixcontrol>Timestretch>.2.TogglebetweenOff/Onbyswipingright.

att/tt

This setting lets you select between a scrubbing vinyl style pause and a stutteringDJpause.1.WheninMixmode,selectSettings>Mixcontrol>Vinylpause>.2.TogglebetweenOn/Offbyswipingright.

st t tThis setting lets you select the crossader type and optionally incorporate eectsinto the crossader.1.WheninMixmode,selectSettings>Mixcontrol>Effectx-fader>.2.TogglebetweenBass/Filter/Offbyswipingright.

st t

This setting lets you select between a normal and a relative crossade indication.1.WheninMixmode,selectSettings>Mixcontrol>Phonesx-fader>.2. Toggle between Relative/Normal by swiping right.



18

dtt/tt bt g

This setting lets you select to visually monitor relative tempo and sync.1.WheninMixmode,selectSettings>Mixcontrol>Beatgraph>.2.TogglebetweenOff/Onbyswipingright.

dtt/tt t g

This setting lets you disallow/allow a warning dialogue when attempting to disruptthe lineout channel.1. Select Settings > Mix control > Lineout warning >.2.TogglebetweenOff/Onbyswipingright.

10.2 Audio settings

st g

This setting lets you select appropriate impedance setting or your headphones.1. Select Settings > Audio > Phones > Range >.

2. Toggle between Hi imp/Low imp by swiping right.

st t

This setting lets you adjust and select the maximum volume level or the head-phones jack.1. Select Settings > Audio > Phones > Volume limit >.2. Set preerred volume limit by stroking along the touchpad rim.

st eq

Thissettingletsyouadjustandselectequalizationfortheheadphonesjack.1. Select Settings > Audio > Phones > Phones EQ >.2. Select EQ register rom Treble >, Mid >, or Bass > by stroking right.3. Set preerred level by stroking along the touchpad rim.

at t

This setting lets you adjust the master volume output or lineout.1. Select Settings > Audio > Lineout > Volume > by stroking right.2. Adjust the master volume by stroking along the touchpad rim.

st t eq

Thissettingletsyouadjustandselectequalizationforlineout.1. Select Settings > Audio > Lineout > Lineout EQ >.2. Select EQ register rom Treble >, Mid >, or Bass > by stroking right.3. Set preerred level by stroking along the touchpad rim.

dtt/tt z

This setting lets you disallow/allow all tracks to be automatically adjusted to thesame relative volume level.1.SelectSettings>Audio>Normalize>.2.TogglebetweenOff/Onbyswipingright.

10.3 Congure settings

att/tt t t t

This setting lets you congure which lters to select rom when navigating yourtracklibrary.Thefollowingltersareavailableforactivation/deactivation:Mix,Case, Album, Artist, Genre, Label, BPM, Key, Added, Rating, Type, Bitrate, Year,and Remix.

1. Select Settings > Congure > Track list lters >.2.TogglebetweenOn/Offforalterbyswipingright.



19

st t t t

This setting lets you choose between linked (both channels) or split (per channel)track list.1.WheninMixmode,selectSettings>Congure>Tracklist>.

2. Toggle between Linked/Split by swiping right.st t t

This setting lets you choose how to display track time.1. Select Settings > Congure > Track time > Display >.2. Toggle between Let/Played by swiping right.

st t t

This setting lets you choose whether to display track time as time let in blinkingred when less than 30 seconds is remaining o the track.1. Select Settings > Congure > Track time > End alert >.2.TogglebetweenOff/Onbyswipingright.

st t tt t

This setting lets you congure the location or the dierent audio eects on thetouchpad.Thefollowinglocationsareavailableforconguration:North,East,South,WestaswellasP-switchupandNorth,P-switchupandEast,P-switchupandSouth,andP-switchupandWest.Thefollowingaudioeffectsandaudiopropertiescanbeassignedtothedifferentlocations:Treble,Mid,Bass,Gain,Reverb,Roll,Echo,Hi-cut/lo-cutlter,Crush,Trans,Wah,andDelay.1.WheninMixmode,selectSettings>Congure>FXlayout>Edit>.2. Toggle between dierent audio eects or the current location by swiping right.

rt t tt t

This setting restores the audio eect palette to its deault values.1.WheninMixmode,selectSettings>Congure>FXlayout>Restore>.

st gg

This setting allows you to set the language or menus and dialogues.Select Settings > Congure > Language >.Select your preerred language by swiping right.

10.4 Power settings

st tb t t

1. Select Settings > Power > Standby >.2.TogglebetweenOff/1min/5minbyswipingright.

st tt1. Select Settings > Power > Intensity >.2. Toggle between Bright/Low/Medium by swiping right.

st bgt t

1. Select Settings > Power > Timeout.2.TogglebetweenOff/10sec/30secbyswipingright.

st gtgt

1. Select Settings > Power > Nightlight >.2.TogglebetweenOn/Offbyswipingright.

st btt b

1. Select Settings > Power > Buttons blink >.2.TogglebetweenOff/Onbyswipingright.



20

10.5 Mix mode settings

ht t

This setting halts your current mix. You can lock Pacemaker rom input i you

want to take a break and continue later. I you’re recording a mix, this setting en-ables saving the current mix to continue with a new recording.WheninMixmode,selectSettings>Halt>andthenselectoptioninthemenuand swipe right1. Continue > to continue mixing.2. Save > to save the current mix.3. Lock > to lock the device rom input.4. New > to start recording a new mix.

att/tt

This setting enables recording your mixes. Saved mixes can be transerred to thePacemaker Editor or playback and editing.1.WheninMixmode,selectSettings>Mixsave>.

2.TogglebetweenOn/Offbyswipingrighttostart/stoprecordingamix.

st m t p

This settings mode is or playing music without using the ull range o unctionsavailable in Mix mode. Play mode is more power ecient with up to three timeslonger operation time.1.WheninMixmode,selectSettings>Playmode>byswipingright.

10.6 Play mode settings

st p t m

1.WheninPlaymode,selectSettings>Mixmode>byswipingright.

st t

1.WheninPlaymode,selectSettings>Playback>Repeat>.2.TogglebetweenAll/One/Offbyswipingright.

st f

1.WheninPlaymode,selectSettings>Playback>Shufe>.2.TogglebetweenOn/Offbyswipingright.



21

11 cgg

Pacemaker has a built-in battery. A ully charged battery last or about ve hours in

Mix mode, or about teen hours in Play mode. I you leave Pacemaker unused ora while, you may need to charge it again.

cg usB

1. Power o your Pacemaker.2. Connect the eatured USB cable to your Pacemaker.3. Connect the other end o the USB cable to your computer.

• Pacemakerdisplaysachargingscreen,afterawhilethescreenisturnedoffandthe play button starts to blink.

When Pacemaker is charging via USB, press the Settings button to enable a dataconnection to the computer.

ot:

cg t ( t)

1. Connect the Pacemaker power adapter to your device using the jacklabelled Power.

2. Plug the adapter into an AC outlet.

p tt

• WhenyourPacemakerisn’tconnectedtoapowersource,thepowersymbolshows the current power status.

• Ifthepowersymbolisblinking,yourPacemakerneedscharging.

Your Pacemaker will charge at dierent rates depending on the type o USB port you connect to. For optimal charging time, use the Pacemaker power adapter.



22

12 ct t

p et b

• Managingandorganizingyourtracks,casesandmixesonPacemakerandyourcomputer.

• Automaticsoftwareupgrades,whenon-linewiththeInternet.• UploadingyourmixestotheInternet.• Exportingyourmixestodigitalaudioles.• Creatingnewmixes,asastand-aloneapplication.

it t t

1. Power on your Pacemaker.2. Connect Pacemaker to your computer via the eatured USB cable.3.WaitforPacemakertobeconnected.4.UseMacOSXFinderorWindowsExploreronyourcomputertonavigatetothe

Pacemaker hard-drive.

5. Double-click it and identiy the appropriate Pacemaker Editor installation le oryour operating system.

6. Double-click the Editor installation le and ollow the instructions to install.

st g

I you’re connected to the Internet while running Pacemaker Editor, you will auto-matically be oered available upgrades or the Pacemaker device and Editor. Youcan also manually check or latest upgrades o the Editor on www.pacemaker.net.

Tg bt et p

Power on your Pacemaker and connect it to your computer with the eatured USBcable and start the Editor.

T t t et t p1. Select the tracks that you want to transer rom the Editor to your Pacemaker.2. Drag and drop the selected tracks rom the Editor to the Pacemaker library.

r t p

1. Select the tracks that you want to remove rom your Pacemaker library on theEditor.

2. Press the delete button on your computer and the tracks are removed.

T t et t p

1. Select the cases that you want to transer rom the Editor to your Pacemaker.2. Drag and drop the selected cases rom the Editor to the Pacemaker library.

r p1. Select the cases that you want to remove rom your Pacemaker library

on the Editor.2. Press the delete button on your computer and the mixes are removed.

T t et t p

1. Select the mixes that you want to transer rom the Editor to your Pacemaker.2. Drag and drop the selected mixes rom the Editor to the Pacemaker library.

These mixes will on the Pacemaker device be represented by track lists only.

The respective track start positions, i.e. cue points, will be transerred as cue points to Pacemaker when transerring mixes.



23

r p

1. Select the mixes that you want to remove rom your Pacemaker library on theEditor.

2. Press the delete button on your computer and the mixes are removed.

T p t t et

1. Select the cases that you want to transer rom your Pacemaker to the Editor.2. Drag and drop the selected cases rom Pacemaker library to the Editor library.

T p t t et

1. Select the mixes that you want to transer rom your Pacemaker to the Editor.2. Drag and drop the selected mixes rom Pacemaker library to the Editor library.

et t gt

1. Select the mix that you want to export to a digital audio le.2. Right-click the mix and select Export to start exporting the mix.3. Select disk location and le name or the mix.

• Themixisrenderedasadigitalaudioleandsavedtoyourcomputer.

T t t p

1. Import the rendered mix le to your Editor.2. Select the mix (represented as a track) in your Editor track library.3. Drag and drop the selected track rom your Editor to your Pacemaker library.• ExportedmixeswillbehandledastracksonyourPacemaker.

et p

1. Click the Eject button to the let o the Pacemaker library on the Editor.2.WaitforyourPacemakertoclearthe‘Donotdisconnect!’screenbeforepulling

the USB plug.3. Do not disconnect the USB cable while transerring data, as this may be

potentially damaging to your Pacemaker.

pb t itt

1. Select the mix you want to upload rom the Editor.2. Click the Publish button to start the uploading process.3. Follow the instructions to publish your mix on the Internet.

It is not possible to transer tracks rom your Pacemaker to the Editor.

You can only transer music to your Pacemaker via the Editor sotware.

Learn more about the Editor at www.pacemaker.net/products/editor.



24

13 st

For Pacemaker service and support inormation, visit the support orum and the

FAQ section at www.pacemaker.net/support

14 st tt

gt

itt t t This product has been manuactured according to strict specications and voltagerequirements that are applicable in the country in which it is intended that thisproduct should be used. I you have purchased this product via the Pacemaker.net,through mail order, and/or via a telephone sale, you must veriy that this product isintended to be used in the country in which you reside.

warninG!

Use o this product in any country other than that or which it is intended couldbe dangerous and could invalidate the manuacturer’s or distributor’s warranty.Please also retain your receipt as a proo o purchase otherwise your productmay be disqualied rom the manuacturer’s or distributor’s warranty.

a g gMindyourears!Usingyourheadphonesatahighvolumemaydamageyourhearingpermanently. Adjust the volume o your Pacemaker to a sae level to avoid thisrom happening. I you experience ringing in your ears, lower the volume or stopusing your Pacemaker.

d t g

You need to be careul driving. Using your headphones behind the wheel is notrecommended and is illegal in some areas. Stop listening to your Pacemaker whiledriving i you are distracted by the sound and cannot keep ull attention on thedriving.

ct

Donotforceaconnectorintoajack!Iftheconnectorandthejackcannotbejoined without orce, they do not match. Make sure that the connector and the jack matches,and control that the connector is positioned correctly in relation to the jack.

Btt

Do not try to remove the Pacemaker battery. Pacemaker must be disposed oaccording to local environmental regulations.

p t ( t)

OnlyuseaPacemakerpoweradapterwithyourPacemaker.Alwaysconnectthe power adapter to an AC outlet o the correct voltage when charging yourdevice. Do not connect it to an outlet o voltage other than that or which thepower adapter is intended. The only way to shut o power to your power adaptercompletely is to disconnect it rom the AC outlet. The Pacemaker power adapter isa high-voltage component and must not be opened or any reason.



25

otg tg tt

Use your Pacemaker in a place where the temperature is always between 0° to35° C (32° to 95° F). Store your Pacemaker in a place where the temperature isalways between -20° and 45° C (-4° and 113° F).

k g tt t p

Never use your Pacemaker or the power adapter nearby liquids, such as drinks,bathtubs, shower stalls, etc. I liquid gets into the device, it could cause a break-down, re, or electrical shock. Protect your Pacemaker and the eatured poweradapter rom direct sunlight and rain or other moisture. Make sure to not spill anyood or liquid on Pacemaker or the power adapter. I oreign matter gets into thedevice, unplug the power adapter rom the wall outlet and power o the device.

it t t t

Radios and televisions placed nearby Pacemaker may experience reception inter-ference.OperatePacemakeratasuitabledistancefromradiosandtelevisions.

d t

Do not attempt to open your Pacemaker or power adapter, disassemble it, orremove the battery. You run the risk o electric shock and voiding the limitedwarranty. No user-serviceable parts are inside.

c

I your Pacemaker becomes dirty, unplug the power adapter rom the wall outletand power o the device, then wipe it with a clean, dry cloth. Do not use liquidcleanerssuchasbenzeneorthinner,orcleaningcompoundsorammablepolishes, as they may damage your device.

hg

To avoid breakage, do not apply excessive orce to connectors, jacks, buttons,

or the display. Be careul not to drop your Pacemaker when playing or transportingthe device.

abt t

Inadvertent operations or unexpected malunctions may cause the contents omemory to be lost. To saeguard your important data, please save it on yourcomputer. Tonium AB will accept no responsibility or any damages resulting romloss o data.



26

14.1 The FCC compliance statement

This device has been tested and ound to comply with the limits or a Class B digitaldevice, pursuant to Part 15 o the FCC rules. These limits are designed to provide

reasonable protection against harmul intererence in a residential installation.

This equipment generates, uses, and can radiate radio requency energy and,i not installed and used in accordance with the instructions, may cause harmulintererence to radio communications. However, there is no guarantee thatintererence will not occur in a particular installation. I this equipment does causeharmul intererence to radio or television reception, which can be determinedby turning the equipment o and on, the user is encouraged to try to correct theinterferencebyoneormoreofthefollowingmeasures:

1. Reorient or relocate the receiving antenna.2. Increase the separation between the equipment and the receiver.3. Connect the equipment into an outlet on a circuit dierent rom that which the

receiver is connected.4. Consult the dealer or an experienced radio/TV technician or help.5.Unauthorizedchangesormodicationtothissystemcanvoidtheuser’sauthority

to operate this equipment.

Responsibleparty(contactforFCCmattersonly):Tonium ABBox 20075S-104 60 StockholmSweden

14.2 Industry Canada Statement

This class B device meets all requirements o the Canadian intererence-causing equipment regulations.

Cet appareil numérique de la classe B respecte toutes les exigences duRéglement sur le matériel brouilleur du Canada.

14.3 Korea Class B statement

B급 기기(가정용 방송통신기기)이 기기는 가정용(B급)으로 전자파적합등록을 한기기로서 주로 가정에서 사용하는 것을 목적으로 하며,모든 지역에서 사용할 수 있습니다.

14.4 VCCI Class B statement

情報処理装置等電波障害自主規制についてこの装置は、情報処理装置等電波障害自主規制協議会(VCCI)の基準に基づくクラスB情報技術装置です。この装置は家庭環境で使用されることを目的としていますが、この装置がラジオやテレビジョン受信機に近接して使用されると、受信障害を引き起こすことがあります。取扱説明書に従って正しく取扱をしてください。



27

14.5 Notice regarding disposal (EU only)

This symbol means that according to local laws and regulations your product shouldbedisposedofseparatelyfromhouseholdwaste.Whenthisproductreachesitsendo lie, take it to a collection point designated by local authorities. Some collectionpoints accept products or ree. The separate collection and recycling o yourproduct at the time o disposal will help conserve natural resources and ensure that itis recycled in a manner that protects human health and the environment.

Lesymboleci-dessussigniequevousdevezvousdébarrasserdevotreproduitsans le mélanger avec les ordures ménagères, selon les normes et la législation

devotrepays.Lorsqueceproduitn’estplusutilisable,portez-ledansuncentredetraitement des déchets agréé par les autorités locales. Certains centres acceptentles produits gratuitement. Le traitement et le recyclage séparé de votre produitlors de son élimination aideront à préserver les ressources naturelles et à protégerl’environnement et la santé des êtres humains.

Das Symbol oben bedeutet, dass dieses Produkt entsprechend den geltendengesetzlichenVorschriftenundgetrenntvomHausmüllentsorgtwerdenmuss.GebenSiediesesProduktzurEntsorgungbeieinerofziellenSammelstelleab.BeieinigenSammelstellenkönnenProduktezurEntsorgungunentgeltlichabgegebenwerden.DurchdasseparateSammelnundRecyclingwerdendienatürlichenRessourcen geschont und es ist sichergestellt, dass beim Recycling des ProduktsalleBestimmungenzumSchutzvonGesundheitundUmweltbeachtetwerden.

Questo simbolo signica che, in base alle leggi e alle norme locali, il prodottodovrebbe essere eliminato separatamente dai riuti casalinghi. Quando il prodottodiventainutilizzabile,portarlonelpuntodiraccoltastabilitodalleautoritàlocali. Alcuni punti di raccolta accettano i prodotti gratuitamente. La raccolta separata e ilriciclaggiodelprodottoalmomentodell’eliminazioneaiutanoaconservarelerisorsenaturali e assicurano che venga riciclato in maniera tale da salvaguardare la saluteumana e l’ambiente.

El símbolo anterior indica que, de acuerdo con la legislación local, la eliminación deesteproductodeberealizarsedeformaseparadadeladelosresiduosdomésticos.Cuandoesteproductoyanopuedautilizarse,lléveloaunodelospuntosderecogidaespecicados por las autoridades locales. Algunos de estos puntos de recogida

prestan el servicio gratuitamente. La recogida selectiva y el reciclaje de su productoen el momento de desecharlo contribuirán a la conservación de los recursosnaturalesygarantizaránunprocesamientodelosresiduosrespetuosoconlasaludde las personas y con el medio ambiente.

Symbolen ovan betyder att produkten enligt lokala lagar och bestämmelser inteår kastas tillsammans med hushållsavallet. När produkten har tjänat ut måsteden tas till en återvinningsstation som utsetts av lokala myndigheter. Vissaåtervinningsstationer tar kostnadsritt hand om uttjänta produkter. Genom attlåta den uttjänta produkten tas om hand ör återvinning hjälper du till att sparanaturresurser och skydda hälsa och miljö.



..t

© 2009 Tonium AB. All rights reserved – all wrongs reserved.

Pacemaker and the Pacemaker logotype are registered trademarks o Tonium AB registeredin Sweden and other countries.

Mac is a trademark o Apple Computer, Inc. registered in the US and other countries.WindowsisaregisteredtrademarkofMicrosoftCorporationintheUSandothercountries.

All other product and company names are trademarks or registered trademarks o their

respective owners.

Pacemaker Manual version 2.0

eng pacemaker manual 2.0

Documents