engine driven welder ts 600 ps - bc - lemljenje |...
TRANSCRIPT
-
Specifications subject to change without notice. For further information please contact the sales department.© MOSA - Viale Europa, 59 - 20090 Cusago (Milano) - Italy -phone +39-0290352.1 - fax + 39-0290390466 E-mail: [email protected] Web site: www.mosa.it
The images are for reference
ENGINE DRIVEN WELDERTS 600 PS - BC
Stan
dard
equi
pmen
t
Dieselengine
Watercooled
Battery12V
Fuel levelgauge
Hours-meter Engine protection
Electric starter
Oil pressureshut down
Hight temp.engine
shut downShut
down battery charge
Low fuelshut down
Warning lightfor preheating
glow plug
Asynchronousalternator
Welding cur-rent electr.regulation
Base currentdiode bridge
Sockets Sockets Ground fault interruptor
Thermalshut off
Voltmeter Emergencystop button
Readyfor RC
Central liftingeye
FEATURES
• Arc welding source in D.C. welding• Electronic regulation of welding current•Welds any type of electrode, including cellulosic• Special BC (Base Current) circuit for pipes descending welding• Double welding range (20A-200A / 20A-600A)• Arc Gouging dedicated socket• A.C. generator also available while welding• Aux power also available while welding• Ground fault interruptor• Silenced• Emergency stop button•Meets EC directives for noise and security
Versionon request
• Auxiliary output: 400Y - 230I - 110I CTE : 1x400V 32A 3P+N+T CEE - 1x230V 32A 2P+T CEE - 1x110V 32A 2P+T CEE - 1x110V 16A 2P+T CEE
Optionson request
• Tank locking cap• Remote control: RC2 - RC2/90° (cable 20m)• Welding cables: K500 (20+15m, 50mm2)
• Welding kit (mask, gloves, etc.)• Earthing kit
• Site tow CTL35• Road trolley CTV1/O• Road trolley CTV1/S
FactoryInstallation Option
• Ammeter/Voltmeter welding• Gauges - Water temperature and oil pressure
• Spark arrestor• Cold start aid
• Blow-by gases oil separator filter• Oil drain pump
Technical data TS 600 PS - BCD.C. WELDING (Costant Current)Current range, continuousDuty cycleOpen circuit voltage
20A ¸ 600A600 A 35% - 550 A 60% - 500 A 100% 75 V
A.C. GENERATION - 50Hz - Three-phase asyncronous alternator, self-regulated, self-excited, brushlessThree-phase powerSingle-phase powerSingle-phase powerInsulation class
40 kVA / 400 V / 57.7 A15 kVA / 230 V / 65.2 A8 kVA / 110 V / 72.7 AH
ENGINE - Diesel, 4-stroke, turbocharged, direct injection, water cooledModel* OutputCylinders / DisplacementSpeedFuel consumption (welding 60%)
Perkins 1103A - 33TG145.6 kW (62 HP)3/ 3300 cm31500 rpm.6 l/h
* Maximum output (not overloadable) according to ISO 3046-1
GENERAL SPECIFICATIONSTank capacityRunning time (welding 60%)IP protection degree* Dimensions Lxlxh (mm)* Dry weight** Acoustic power LwA (pressure LpA)
65 l10.5 hIP 232030x870x11301025 kg97 dB(A) (72 dB(A) @ 7m)
* Values shown do not include trolleys **For fixed installation only in the EU market.
TS600PS-BCZGB 05/12
MS 200 SMSG CHOPPERNEW MAGIC WELD MAGIC WELD 200 MAGIC WELD 200 YD MAGIC WELD 200 YDE TS 200 BS/ELTS 200 DS/CF - DES/CFTS 200 DES/ELTS 200 KDES/ELTS 250 KD/ELTS 200 BS/CFCT 230 SXCT 230 YSX CC/CVTS 300 KS/EL - KSX/ELCT 350 KSXCT 2x250 PSXTS 400 KS/EL - KSX/ELTS 350 YSX - BCTS 415 VS/EL-BC - VSX/EL-BCTS 615 VS/EL-BC - VSX/EL-BCTS 400 PS/EL- BCTS 500 PS - BC 60 HzTS 600 PS - BCTS 2x400 PSX - BCDSP 400 YSXDSP 500 PSDSP 600 PSDSP 2x400 PSX