engine model jw6h-uf60

NAMEPLATE BHP (MAXIMUM PUMP LOAD)

360(269)

375(280)

360(269)

1700 1800 1900 2000 2100 2200 2300355

360

365

370

375

380

RESTRICTED:

DATE CREATED

DRAWING NO. REVC

ENGINE MODEL JW6H-UF6005/14/01

C13543

THIS DRAWING AND THE IN-FORMATION HEREIN ARE OUR PROPERTY AND MAY BE USED BY OTHER ONLY AS AUTHORIZED BY US. UNPUBLISHED -- ALL RIGHTS RESERVED UNDER THECOPYRIGHT LAWS.KEN WAULIGMAN 17OCT06

CREATED

USE ONLY FOR STAND-BY FIRE PUMP APPLICATIONS

FIRE PUMP MODEL: JW6H-UF60Heat Exchanger Cooled

TurbochargedRaw Water Charge Cooling

ENGINE SPEED - RPM

STANDARD CONDITIONS: (SAE J1349, ISO 3046)77°F (25°C) AIR INLET TEMPERATURE29.61 IN. (751.1MM) HG BAROMETRIC PRESSURE#2 DIESEL FUEL (SEE C13940)

ENGINE PERFORMANCE:

of 10

JW6H-UF60

USA ProducedINSTALLATION & OPERATION DATA (I&O Data)

Basic Engine Description Engine Manufacturer John Deere Co. Ignition Type Compression (Diesel) Number of Cylinders 6 Bore and Stroke - in (mm) 4.56 (116) X 5.06 (129) Displacement - in³ (L) 496 (8.1) Compression Ratio 15.7:1 Valves per cylinder

Intake 1

Exhaust 1 Combustion System Direct Injection Engine Type In-Line, 4 Stroke Cycle Fuel Management Control Mechanical, Inline Pump Firing Order (CW Rotation) 1-5-3-6-2-4 Aspiration Turbocharged Charge Air Cooling Type Raw Water Cooled Rotation, viewed from front of engine, Clockwise (CW) Standard Engine Crankcase Vent System Open Installation Drawing D495 Weight - lb (kg) 2053 (931)

Power Rating 1760 2100 2350 Nameplate Power - HP (kW) 360 (269) 375 (280) 360 (269)

Cooling System - [C05804] 1760 2100 2350 Engine Coolant Heat - Btu/sec (kW) 159 (168) 197 (208) 206 (217) Engine Radiated Heat - Btu/sec (kW) 38 (40.1) 40 (42.2) 38 (40.1) Heat Exchanger Minimum Flow

60°F (15°C) Raw H20 - gal/min (L/min) 41 (155) 44 (167) 44 (167)

95°F (35°C) Raw H20 - gal/min (L/min) 45 (170) 47 (178) 47 (178) Heat Exchanger Maximum Cooling Raw Water

Inlet Pressure - psi (bar) 60 (4.1)

Flow - gal/min (L/min) 80 (303) Typical Engine H20 Operating Temp - °F (°C)[1] 180 (82.2) - 195 (90.6) Thermostat

Start to Open - °F (°C) 180 (82.2)

Fully Opened - °F (°C) 202 (94.4) Engine Coolant Capacity - qt (L) 23.24 (22) Coolant Pressure Cap - lb/in² (kPa) 10 (68.9) Maximum Engine Coolant Temperature - °F (°C) 200 (93.3) Minimum Engine Coolant Temperature - °F (°C) 160 (71.1) High Coolant Temp Alarm Switch - °F (°C) 205 (96.1)

Electric System - DC Standard Optional System Voltage (Nominal) 12 24 Battery Capacity for Ambients Above 32°F (0°C)

Voltage (Nominal) 12 [C07633] 24 [C07633]

Qty. Per Battery Bank 1 1 SAE size per J537 8D 8D CCA @ 0°F (-18°C) 1400 1400 Reserve Capacity - Minutes 430 430

Battery Cable Circuit, Max Resistance - ohm 0.0017 0.0017 Battery Cable Minimum Size

0-120 in. Circuit Length[2] 00 00

121-160 in. Circuit Length [2] 000 000 161-200 in. Circuit Length [2] 0000 0000

Charging Alternator Maximum Output - Amp, 40 [C07639] 18 [C071048] Starter Cranking Amps, Rolling - @60°F (15°C) 440 [C07825] 326 [C07820]

NOTE: This engine is intended for indoor installation or in a weatherproof enclosure. 1Engine H2O temperature is dependent on raw water temperature and flow. 2Positive and Negative Cables Combined Length.

Page 1 of 2

of 10

JW6H-UF60

USA ProducedINSTALLATION & OPERATION DATA (I&O Data)

Exhaust System 1760 2100 2350 Exhaust Flow - ft.³/min (m³/min) 1968 (55.7) 2297 (65) 2418 (68.5) Exhaust Temperature - °F (°C) 902 (483) 853 (456) 813 (434) Maximum Allowable Back Pressure - in H20 (kPa) 26 (6.5) 28 (7) 30 (7.5) Minimum Exhaust Pipe Dia. - in (mm)[3] 6 (152) 6 (152) 6 (152)

Fuel System 1760 2100 2350 Fuel Consumption - gal/hr (L/hr) 16.5 (62.5) 17.5 (66.2) 17.5 (66.2) Fuel Return - gal/hr (L/hr) 62.5 (237) 62 (235) 61.5 (233) Fuel Supply - gal/hr (L/hr) 79 (299) 79.5 (301) 79 (299) Fuel Pressure - lb/in² (kPa) 25 (172) - 35 (241) Minimum Line Size - Supply - in. .50 Schedule 40 Steel Pipe

Pipe Outer Diameter - in (mm) 0.848 (21.5) Minimum Line Size - Return - in. .375 Schedule 40 Steel Pipe

Pipe Outer Diameter - in (mm) 0.675 (17.1) Maximum Allowable Fuel Pump Suction Lift

with clean Filter - in H20 (mH20) 31 (0.8)

Maximum Allowable Fuel Head above Fuel pump, Supply or Return - ft (m) 9 (2.7) Fuel Filter Micron Size 5

Heater System Standard Optional Engine Coolant Heater

Wattage (Nominal) 2500 2500 Voltage - AC, 1 Phase 115 (+5%, -10%) 230 (+5%, -10%) Part Number [C122191] [C122195]

Air System 1760 2100 2350 Combustion Air Flow - ft.³/min (m³/min) 780 (22.1) 939 (26.6) 1020 (28.9) Air Cleaner Standard Optional

Part Number [C03244] [C03330] Type Indoor Service Only, Canister,

with Shield Single-Stage Cleaning method Washable Disposable

Air Intake Restriction Maximum LimitDirty Air Cleaner - in H20 (kPa) 14 (3.5) 14 (3.5)

Clean Air Cleaner - in H20 (kPa) 7 (1.7) 7 (1.7) Maximum Allowable Temperature (Air To Engine Inlet) - °F (°C)[4] 130 (54.4)

Lubrication System Oil Pressure - normal - lb/in² (kPa) 35 (241) - 55 (379) Low Oil Pressure Alarm Switch - lb/in² (kPa) 20 (138) In Pan Oil Temperature - °F (°C) 190 (87.8) - 220 (104) Total Oil Capacity with Filter - qt (L) 30.1 (28.5)

Lube Oil Heater Optional Optional Wattage (Nominal) 150 150 Voltage 120V (+5%, -10%) 240V (+5%, -10%) Part Number C04430 C04431

Performance 1760 2100 2350 BMEP - lb/in² (kPa) 327 (2250) 285 (1970) 245 (1690) Piston Speed - ft/min (m/min) 1484 (452) 1771 (540) 1982 (604) Mechanical Noise - dB(A) @ 1m C13920 Power Curve C13543 3Based on Nominal System. Back pressure flow analysis must be done to assure maximum allowable back pressure is not exceeded. (Note:

minimum exhaust Pipe diameter is based on: 15 feet of pipe, one 90° elbow, and a silencer pressure drop no greater than one half of the maximum allowable back pressure.) 4Review for horsepower derate if ambient air entering engine exceeds 77°F (25°C). [ ] indicates component reference part

number.

Page 2 of 2C13614 Rev HKJK 14FEB13

of 10

CLARKE Fire Protection Products

Air Cleaner Cylinder BlockType…………..………….. .. .. Indoor Usage Only Type………………………………One Piece with Non-Siamese Cylinders

Oiled Fabric Pleats Material……………………………Cast Iron AlloyMaterial……..…..…….………. Surgical Cotton, Aluminum Mesh Cylinder HeadAir Cleaner - Optional Type…………………………………Slab 2 ValveType…………………………. Canister Material………….…………………Cast IronMaterial……………………… Pleated PaperHousing………………..……… Enclosed Cylinder Liners

Type…………………………………Centrifugal Cast, Wet LinerCamshaft Material………...……………..… Alloy Iron Plateau, HonedMaterial………….…………...… Cast Iron, Chill HardenedLocation…………...….……..… In Block ValvesDrive……………….………..… Gear, Spur Type…………………………………PoppetType of Cam…………..…......… Ground Arrangement……………. ………Overhead Valve

Number/Cylinder…………………1 intake/1 exhaustCharge Air Cooler Operating Mechanism……………Mechanical Rocker ArmType……………… Jacket Water Cooled-JW6H-30, 38 (06WA) Type of Lifter……...……………. Large Head

Valve Seat Insert…...……………Replaceable

Materials (in contact with raw water)Tubes………………………………90/10 CU/NI Fuel PumpHeaders ………………………36500 Muntz Type…………………………………PistonCovers ………………………83600 Red Brass Drive………………………………Cam LobePlumbing ………………………316 Stainless Steel/ Brass

90/10 Silicone Heat ExchangerType………………………………Tube & Shell

Coolant Pump MaterialsType………….………………………Centrifugal Tube& Headers………………… CopperDrive……… …………………….. Gear Shell…………………………………Copper

Electrode…………………………ZincCoolant ThermostatType……………………………… Full Blocking Injection PumpQty…………………………………2 Type……………………….. In-Line

Drive…………………………… GearCooling Loop (Galvanized)Tees, Elbows, Pipe………………Galvanized Steel Lubrication CoolerBall Valves…………………………Brass ASTM B 124 Type………………………………PlateSolenoid Valve……………………Brass Pressure Regulator………………Bronze Lubrication PumpStrainer……………………………Cast Iron (1/2"- 1" Loops) Type………………………………Gear

or Bronze (1.25" - 2" Loops) Drive………………………………Gear

Cooling Loop (Sea Water) Main BearingsTees, Elbows, Pipe………………316 Stainless Steel Type………………………………Precision Half ShellsBall Valves…………………………316 Stainless Steel Material……………………………Steel Backed-Aluminum LinedSolenoid Valve……………………316 Stainless SteelPressure Regulator/Strainer……Cast Brass ASTM B176 C87800 Piston

Type and Material……………… Aluminum Alloy with ReinforcedCooling Loop (316SS) Top Ring GrooveTees, Elbows, Pipe………………316 Stainless Steel Cooling……………………………Oil Jet SprayBall Valves…………………………316 Stainless SteelSolenoid Valve……………………316 Stainless Steel Piston PinPressure Regulator/Strainer……316 Stainless Steel Type………………………………Full Floating - Offset

Connecting Rod Piston RingsType……………………………… I-Beam Taper Number/Piston……………………3Material……………………………Forged Steel Alloy Top…………………………………Keystone Barrel Faced -

Plasma CoatedCrank Pin Bearings Second……………………………Tapered Cast IronType……………………………… Precision Half Shell Third………………………………Chromium FacedNumber……………………………1 Pair Per CylinderMaterial……………………………Wear-Guard

CrankshaftMaterial……………………………Forged SteelType of Balance………………… Dynamic

Raw Water Cooled - JW6H-40(06WR), 48, 50, 58, H8, 60, AAM8, AA80, ADB0, ADD0, ADF0, ADJ0, AD70, AD80

JW6H (JDFP-06WA,06WR )ENGINE MATERIALS AND CONSTRUCTION

C13616 revE of 10

6 CylindersFour CycleLean BurnTurbocharged & Raw Water Aftercooled

1760 360 16.5 (62) 0.20 5.23 0.81 0.20 902 (483) 1968 (56)

2100 375 17.5 (66) 0.34 4.30 0.24 0.19 853 (456) 2297 (65)

2350 360 17.5 (66) 0.46 3.68 0.47 0.20 813 (434) 2418 (68)

Notes:

1)

2)

3)

4) PM is a measure of total particulate matter, including PM10 .

by John Deere Corporation. A copy of the John Deere Emission Warranty can

be found in the Clarke Operation and Maintenance Manual.

Engines are rated at standard conditions of 29.61in. (7521 mm) Hg barometer

and 77°F (25° C) inlet air temperature. (SAE J1349)

FUEL GAL/HR (L/HR)

6081HF001 Base Engine Model manufactured by John Deere Corporation.

For John Deere Emissions Conformance to EPA 40 CFR Part 60 see Page 2 of 2.

The Emission Warranty for this engine is provided directly to the owner

500 PPM SULFUR #2 DIESEL FUEL

JW6H-UF60Stationary Fire Pump Engine Driver

EMISSION DATAEPA 40 CFR Part 60

EXHAUSTRPM BHP (3)

GRAMS / HP- HR

PM (4)NMHC CONOx °F (°C)CFM

(m3/min)

C131862 REV.D01NOV 07 KRW

CLARKEFIRE PROTECTION PRODUCTS

3133 EAST KEMPER ROADCINCINNATI, OH 45241

PAGE 1 OF 2

of 10

of 2

John Deere Power Systems3801 W. Ridgeway Ave., PO Box 5100Waterloo, Iowa USA 50704-5100

31 October 2007

Subject: Fire Pump Ratings – Conformance to EPA 40 CFR Part 60 (NSPS requirements)

All John Deere stationary fire pump engines conform to the requirements of 40 CFR Part 60. All suchengines include an emission label, stating the engine conforms to the requirements of 40 CFR Part 60. Anexample of the emission label is show below:

This label applies to all of the following engine models, sold to Clarke Fire Protection, for use in stationaryfire pump applications:

All engines conforming to 40 CFR Part 60 (identified by emission label, as shown above) are covered underthe emissions warranty of 40 CFR Part 89.

Sincerely,

Kyle J. TingleRegional Sales Manager, JDPS

of 10

CLARKEwww.clarkefire.com

RPM BHP OVERALL 31.5 Hz 63 Hz 125 Hz 250 Hz 500 Hz 1k Hz 2k Hz 4k Hz 8k Hz 16k HzdB(A) dB(A) dB(A) dB(A) dB(A) dB(A) dB(A) dB(A) dB(A) dB(A) dB(A)

1760 360 109.2 67 69.2 82.6 89.2 97.1 99.7 104.9 103.4 101.7 101.7

2100 375 109.1 65.4 68.3 82.1 89.2 96.7 99.5 104.1 101.7 96.6 98.7

2350 360 107.3 66.4 56.7 77.7 86.1 94.2 98.6 103.4 102.0 94.5 93.8

RPM BHP OVERALL 31.5 Hz 63 Hz 125 Hz 250 Hz 500 Hz 1k Hz 2k Hz 4k Hz 8k Hz 16k HzdB(A) dB(A) dB(A) dB(A) dB(A) dB(A) dB(A) dB(A) dB(A) dB(A) dB(A)

1760 - 2350 360 - 375 114.2 103.9 108.3 103 105.2 104.8 107.5 104.7 94.4 88

* Values above are provided at 3.3ft (1m) from engine block and do not include the raw exhaust noise.

The above data reflects values for a typical engine of this model, speed and power in a free-field environment.

Octave Band

** Values above are provided at 23ft (7m), 90° horizontal, from a vertical exhaust outlet and does not include noise created mechanically by the engine.

Installation specifics such as background noise level and amplification of noise levels from reflecting off of surrounding objects, will affect the overall noise levels observed. As a result of this, Clarke makes no guarantees to the above levels in an actual installation.

Fire Protection Products

JW6H-UF60FIRE PUMP DRIVER

NOISE DATA

Mechanical Engine Noise *

Raw Exhaust Engine Noise **

Octave Band

C13920 REVC 01OCT14 DSP

of 10

engine model jw6h-uf60

Documents