engineering servicescaetechnology.net/downloads/engineeringservices.pdfengineering services...
TRANSCRIPT
Engineering Services
www.caetechnology.net
Fast growing Engineering Solution provider
- Innovation/Technologies / Services
Expertise in CAD,CAE,FEA,CFD
High retention of employees
High Quality & Timely delivery
- Highest customer satisfaction- Highest customer satisfaction
ISO 9001:2008 Certified
Engineering ServicesEngineering Services
AEROSPACE AUTOMOTIVE HEAVY ENGINEERING WIND TURBINE
MEDICAL DEVICE SOLUTIONSPLASTICS RAIL OIL and GAS
3D Modeling
Assembly
Digitization
CADD Management
CAD to CAD Data Migration
3D 3D Modeling(2DModeling(2D to 3D Conversion)to 3D Conversion)
CAD models are generated from the existing 2D drawings. 3D modelingassignments for various components of automotive parts, engines, pumps,motors, turbines, heavy engineering equipment, earth moving equipment,consumer durable items, etc. are done, as the starting point.
PCB Hood LatchGear Box
Fuel Tank Casing
Remote Assembly Engine Cover Casing
Transformer
MAIN ANALYSIS AREAS
Static Analysis
Dynamic Analysis
Thermal Analysis
Composite Structural Analysis
Crashworthiness Analysis
Design Of Experiments (DOE) / Redesign
SPECIALIZED ANALYSIS AREAS
NVH Analysis
Vehicle Dynamics
Fatigue Calculations (Low Cycle & High Cycle)
Shock/Impact analysis
CAE SolutionsCAE Solutions
Shock/Impact analysis
Computational Fluid Dynamics (CFD)
Durability Analysis
Metal Stamping Analysis
Rotor Dynamics
Non-Linear Analysis including Contacts, Large Deflections & Plasticity
MeshingMeshing
Shell meshing Hexa (solid) meshing
BIW meshing Hex-to-Tetra meshing
Tetra Mesh of Gear Box Hexa Mesh of Fuel Rail Shell Mesh of Automotive component
MeshingMeshing
Shell Mesh Chassis Shell Mesh ChassisShell Mesh Chassis Shell Mesh Chassis
Hexa Mesh of Connector Tetra Mesh Wheel
Deflection Stresses Strains Forces Energies
Static AnalysisStatic AnalysisStatic analysis is to determine stresses, strains, deflection, factor of safety, margin
of safety, forces, energies, etc. by using linear/ non-linear analysis techniques.
Energies
Nonlinear Analysis : Geometric nonlinearity Material nonlinearity Contact nonlinearity Drop impact - nonlinear response
FEA of wind turbine frame FEA of Bracket
FEA of wind turbine Blade FEA of Boot Seal
Estimation of natural frequencies for simple to complex systems are done by us.We have the expertise in analyzing for various types of loads such as time varying,harmonic and impact.
Modal Analysis
Harmonic Analysis
Random Vibration
Dynamic AnalysisDynamic Analysis
Random Vibration Analysis
Transient Dynamic Analysis
Spectrum Analysis
Modal Cyclic Symmetry
Dynamic Analysis of wind turbine Shaft
Dynamic AnalysisDynamic Analysis
Modal analysis of Shaft Modal analysis of wind turbine blade
Thermal AnalysisThermal Analysis
Thermal analysis is done for estimation of temperature distribution, heat flux, thermalgradients & heat flow. Analysis is done for both steady flow & transient conditions.
CAD MODEL MESH STRESS INTENSITY
SN Curve Comparison Curve
Thermal
STRESS INTENSITYMESHMODEL
Analysis of Heat exchanger
Thermal AnalysisThermal Analysis
Thermal analysis
Thermal analysis
Thermal analysis
CAD MODEL STRESS INTENSITY DISPLACEMENTMESH
Analysis of Flange and Blind Flange Assembly
Thermal
Fatigue analysis is done for estimation of Alternating stresses, SN curve,Endurance limit, loading factor, mean stress, notch factor. Analysis is donefor both LCF/HCF analysis techniques.
Fatigue AnalysisFatigue Analysis
Thermal analysis
Thermal analysis
Thermal analysis
CAD - Model MESH Finite Element Analysis S-N Curve
Fatigue Analysis of wind turbine hub-extender assembly
Crashworthiness AnalysisCrashworthiness Analysis
Dynamic Side Impact Bumper Impact Fuel Tank System Bumper Strength Head Restraints Seating Systems
Side Crash AnalysisCar to carSide Crash Analysis
Seating Systems Side Impact Rear Impact Rear Impact Roof Crush Resistance
Airbag Crash Analysis
Data Analysis:
Analysis of Means (ANOM)
Analysis of Variance (ANOVA)
Pair wise comparison
Interaction (Effects) plots
Design Optimization (DOE)Design Optimization (DOE)
Interaction (Effects) plots
Response plots
Residuals analysis
Regression
Screen plot
FE Model of Bracket
Design Optimization (DOE)Design Optimization (DOE)
The current design of the inlet casing has stiffness close to 7MN/m. while the desiredstiffness is 175MN/m. This stiffness needs to be achieved with minimum weight to thestructure
13 Struts 10 Struts 07 Struts
Design optimization of Inlet Casing
Solution : Required stiffness can be achieved with 10 number of struts.
CFD AnalysisCFD Analysis
The potential improvements through upgrading an existing design can be judged quickly and efficiently by the use of CFD.
Problems and limitations of the old design are clarified by a CFD diagnosis.clarified by a CFD diagnosis.
The CFD analysis of new design solutions indicates the improvements in efficiency and output.
CFD Analysis of Heat Sink
CFD AnalysisCFD AnalysisTemperature Contours
CAE Team of CAE Technology has engineers, who worked for (National Aerospace Laboratories) in the area of aerospace.
Work carried out related to aerospace are:
Design and Impact of analysis of light weight helicopter.Static and Modal analysis of light weight helicopter.
AerospaceAerospace
Design and Impact analysis of LTAV.Static and modal analysis of LTAV.Design analysis of MAV.
CAE Tech provides reverse engineeringservices to generate 3D models of physicalparts or components. We take the physicalpart, get it scanned through one of ourpartners, get the point cloud, use it to generatethe 3D model in the required CAD package.As part of quality assurance, these 3D models
Reverse EngineeringReverse Engineering
As part of quality assurance, these 3D modelscan be compared with the prior design modelto find the differences. Our infrastructurefacilities coupled with the rich and vastexperience of our engineers enable us toundertake a wide array of reverse engineeringassignments.
MPI/Flow simulates the filling and packing phases of the injection moldingprocess to predict the flow behavior of thermoplastic melts so you can ensureparts of acceptable quality can be manufactured efficiently.
Mold Filling
Determine Injection Pressure
Determine Clamping Force
Mold Flow AnalysisMold Flow Analysis
Determine Clamping Force
Uniform Filling, Cycle Time
Predict Weld line Locations
Identify Potential Air Traps
Optimize process conditions
Determines High volumetric shrinkage
Determine Gate Freeze Time
MPI/Cool provides tools for modeling mold cooling circuits, inserts, and basesaround a part and analyzing the efficiency of the mold's cooling system.
Uniform Cooling With Minimum Cycle Time
Temperatures Between Core and Cavity Surfaces
Minimized Unbalance Cooling & Residual Stress
Mold Flow AnalysisMold Flow Analysis
Predict Temperatures for all Surfaces within the Mold : Part, Runners, Cooling Channels, Inserts
Predict required Cooling Time & Cycle Time
Seismic AnalysisSeismic Analysis
Seismic Analysis of tie-down straps for a VPRO Magnus Filter Holder
CAD - MODEL MESH FEA of Single Strap Holder
FEA of Double Strap Holder
Seismic analysis was performed to determine forces under USA seismic loading requirements and design a seismic strap/tie down accessory to isolate the VPRO Magnus Filter Holder during seismic events.
Flexible Business models Best infrastructure Best quality On-time delivery. Customer integrity Expertise in the focused domains.
Advantage CAE TechnologyAdvantage CAE Technology
Expertise in the focused domains. In-house developed various IPs.
Cost effectiveness.
Global Presence
CAE Technology India Private Limited
(Corporate Office) 1Y, Iyengar Towers,100 Ft Ring Road Banashankari 3rd stage, 3rd phase,Bangalore-560085 Karnataka Tel: +91-80-42078908 Fax: 91-80-40927435 Mob: +91-9900000740 Germany
USA
#106.,
4920 Sand Dune Circle
West Palm Beach
Florida, USA -33417
Phone - 001-(561)689 6193
Email :[email protected]
Mob: +91-9900000740 Email: [email protected]
Tamilnadu 12A, Kandapalayam, Perundurai 638052 Tamilnadu, Tel : +91-4294220017 Mob :+91-9965545566 Email : [email protected]
Germany Enger Strabe 13, D 25917 Enge-Sande, Email : [email protected]
United Kingdom 66D Castlegate Newark N G 24 1BG Mob : +447809375274 Email : [email protected]
Malaysia No.19, Jalan Kiara 3 KS 6, Bandar Botanic 41200klang, West Malaysia Email : [email protected]
Thank You