english for industrial mahinery students. (2)
TRANSCRIPT
Question Excerpt
1. examine the tool for damages before use. A. True XB. False
2. It is OK to wear loose clothing, dangling objects and jewellery using hand tool. A. True B. False X
3. Keep cords and hoses away from heat, oil and sharp edges. A. True XB. False
4. Use only tools and equipment in good condition. A. True XB. False
5. It is OK to make adjustments or clear a jam while the power tool is running. A. True B. False x
6. If any tool breaks or malfunctions, report it to your supervisor immediately. A. True x B. False
7. Before connecting to a power source, make sure the power is on. A. True B. False x
8. Safety glasses shall always be worn whenever you are using power hand tool.
A. True xB. False
9. There are several types of power tools, including electric, pneumatic, hydraulic. A. True xB. False
10. Never use electric tools in wet conditions.
A. True xB. False
11. When not in use, power tools should be disconnected. A. True xB. False
12. Keep safe distance between your hands and all moving parts of the power tool. A. True xB. False
13. Don’t leave a power tool unattended while it is running. A. True xB. False
14. It is OK to startle someone who is using a power tool.
A. True B. False x
15. Use safety guards exactly as they are supposed to be used. A. True xB. False
16.When tightening a nut with an adjustable wrench, always pull the wrench toward you; never push the wrench away from you.
A. True xB. False
17.Plastic covered handles on wire-cutting pliers may be used to cut low-voltage live electrical wire.
A. True xB. False
18.Screwdrivers may be used for purposes other than driving or removing screws, for example as a chisel.
A. TrueB. False x
19. When selecting a standard screwdriver be certain that the tip is almost as thick and as wide as the slot of the head of a screw.
A. True xB. False
20. When using a hacksaw, safety glasses must be worn. A. True xB. False
21. When you are finished using a hacksaw, tension should be eased. A. True B. False x