enterprising engineers, bhopal
TRANSCRIPT
46-47 A, Industrial Area, Bhopal
www.enterprisingengineers.com
+91 755 2602964/2586684 +91 7389906750
ENTERPRISING ENGINEERS,
BHOPAL
ENTERPRISING ENGINEERS, BHOPAL
2
INTRODUCTION:
This organization was established in 1972 by a team of qualified, experienced and enthusiastic
Engineers. Since then, it is very successfully designing and manufacturing Electrical Engineering
Items like PCC, MCC, Control Panels, Liquid Rotor Resistances Starter & Speed
Regulator/Controllers, Grid Rotor Resistance Starter & Speed Regulator/Controllers, Soft
Starters, Mechanical Castle Integral/Interlocks, Mech. Safety Key Interlocking Systems and
Special LT Control Panels like Auto - Synchronizing Panels, Automatic Power Factor Correction
Panels, Automatic Mains Failure Change Over Panel for DG Sets & Control, Protection Indication
and Alarm Panels for DG Sets.
The organization is dealing with many reputed parties all over India and abroad. It is having a
Full fledged team of technical staff in Engineering Design, Drawing, Production, Quality Control
and Sales functions.
REGISTRATION DETAILS OF THE COMPANY :
SSI Registration No. : SSI/MP/BPL/AGE/704/74/(2)75/(1)/8 dt. 06-09-74
DIC Registration No. : EM No. 23321202586 PART II being SSI Unit/MSME Supplier
covered under MSMED Act, Oct’ 2006
Factory License No. : 88/3339/BPL/2mi/NH
LST-MPCT/VAT : 001/BPL/I/HEL/0092/5 w.e.f. 12-04-1972
CST : BPL/I/HEL/1323/C w.e.f. 12/04/1972
TIN/VAT No. : 23143600092 w.e.f. 01/07/2003
Excise License No. : 50/R-III/DIV.-1/BPL/92
Excise Regd. No. : AAAFE8864CEM001 w.e.f. 20/01/2014
ECC Code No. : AAAFE8864CEM001 w.e.f. 20/01/2014
Service Tax No. : AAAFE8864CST001 w.e.f. 25/05/2007
Income Tax PAN No. : AAAFE8864C w.e.f. 02/03/2001
Income Tax TAN No. : BPLE00027G
Import/Export-IEC Code : 1197004840 w.e.f. 10/12/1997 (E-net updated 05/12/2003)
ESI & PF Regd. No. : 18000070170000406 & MP/3053
ISO 9001-2015 Certificate No. : PCMS/QMS/1045-2018 valid up to 28/01/2021 State Bank of India CC A/c no. : 10116991778 SME Branch / Branch Code : 1253 IFSC Code : SBIN0001253 MICR Code : 462002024 Swift Code : SBININBB735
GST Number : 23AAAFE8864C1ZO ( Last letter is Alphabet " O " )
Udyog Aadhaar Number : MP10B0007810
ENTERPRISING ENGINEERS, BHOPAL
3
PANEL OF EXPERTS
This organization has the services of following Engineers, Professionals and Experts.
1. Mr. K. G. Bansal B.E. (Hons) in Mech. Engineering.
2. Mr. Nitin Bansal Masters from IIT-Kanpur.
3. Mrs. Aparna Bansal Masters from IIT-Kanpur.
TECHNICAL STAFF
The Organization has Graduate Engineers, Engineering Diploma Holders, Qualified Draughtsman
and other technically qualified, experienced and skilled staff on its rolls.
ORGANISATION
Contact Persons
Shri K. G. Bansal Managing Partner
Shri Nitin Bansal C.E.O.
Smt. Aparna Bansal Partner
Work Force
Sales : 04
Design : 04
Administration : 02
Supervision : 03
Skilled : 35
Semiskilled : 23
Unskilled : 20
Quality Control : 04
Store & Purchase: 03
ENTERPRISING ENGINEERS, BHOPAL
4
RANGE OF PRODUCTS
DESIGN, DEVELOPMENT, MANUFACTURE / SUPPLIER, INSTALLATION & COMMISSIONING OF
LIQUID ROTOR RESISTANCE STARTER & SPEED CONTROLLER, GRID ROTOR RESISTANCE
STARTER & SPEED CONTROLLER (SS COIL TYPE & SS PUNCHED TYPE GRID RESISTANCE
ELEMENT), FCMA ROTOR STARTER / FCMA SLIP REGULATOR / FCMA SOFT STARTER,
MECHANICAL & ELECTRICAL CASTELL SAFETY INTERLOCKING DEVICES, LT CONTROL
PANELS, MARSHALLING BOX / KIOSK, RTCC / FOTC & ALL OTHER RELATED ITEMS / SPARES.
CONTROL & RELAY PANELS :
Wide Variety for Different Applications Like:
• Control of HT Circuit Breakers provided with Protection and Instrumentation. These
are used commonly in H.T. Sub-Stations.
• Machine Panels for Remote / Local Control of Electrical Motors.
• Crane Control Panels.
• PLC based Automation Panels for Automatic Control of various operations in Process
Industries.
• AC / DC Drive Panels for Variable Speed Drive of various type of Motors.
MOTOR CONTROL CENTERS (MCC) - DRAW-OUT AND FIXED :
For Remote Control and Protection of different type of Motors used in various Industries
as Chemical Plants, Cement Industries, Power Plants, Process Plants, and other
Large Industries. The Construction is Modular with Vertical & Horizontal Bus-Bars, Vertical
Wire - Ways and Top or Bottom Cable Entry. We design, manufacture, and supply
both DRAW - OUT AND FIXED TYPES OF MCCs.
POWER CONTROL CENTERS (PCC) & DISTRIBUTION BOARDS :
For Electrical Distribution System of any Factory, Plant or Installation provided with
Incomers and Out - Going Feeders complete with Horizontal and Vertical Bus Bars and
connections along with required Controls, Protection, and Instrumentation as per
the specification of customer and system requirements. These are of Sheet Steel
Fabricated construction with Front / Back Doors, suitable for Floor or Wall Mounting,
designed and manufactured as per customer’s requirements and specification.
ENTERPRISING ENGINEERS, BHOPAL
5
SPECIAL APPLICATION PANELS :
• Automatic Mains Failure (AMF) Change - Over Panels for Diesel Generator Sets.
• Diesel Generator Synchronizing Panels.
• Automatic Power Factor Correction Panels.
MARSHALING BOXES OR KIOSKS ( STEEL SHEET / ALUMINIUM SHEET FABRICATED) :
For Transformers, Switchyard and other equipments, self - standing / equipment -
mounted/wall mounted types with Front opening only or Front and Rear Opening as
required.
REMOTE TAP CHANGER CONTROL PANELS FOR TRANSFORMERS
Self -standing type, equipment - mounted and wired with Front Opening.
MOTOR STARTER PANELS (DOL & STAR - DELTA)
Direct On Line and Star - Delta Motor Starters complete with Indication and Measuring
Instruments & Protection Realys.Totally enclosed in Dust and Vermin Proof Sheet Steel
enclosure suitable for Floor or Wall Mounting.
PUSH-BUTTON STATIONS, CONTROL POSTS, CONTROL DESK :
Having Sheet Steel Fabricated Dust and Vermin Proof construction with Front or Back Doors
and provided with Push-Buttons, Indicating Lamps, Switches and other Instruments for Local
or Remote Operations of Machines. These can be supplied suitable for Pedestal or Wall
Mounting application.
INTERLOCKING DEVICES (CASTLE TYPE) :
Different types of Interlocking Device to ensure proper sequence of two or more
independent operations of Electrical or Mechanical equipments. The need for proper
sequence may be safety of Personnel or Equipments or it may be the requirement of the
Process.
* Mechanical Interlocks Type DL.
* Bolt Locks Type K or L.
* Bolt Locks with Electrical Switches.
ENTERPRISING ENGINEERS, BHOPAL
6
* Door Locks Type DT1 or DT2.
* Electrical Interlocks.
SOFT STARTERS:
Soft Starters minimizes the Starting mechanical and thermal stress/shocks on the machine and
the motor. It results in reduced maintenance cost, fewer breakdowns and hence longer
operating life for both. Reduced starting current is an added advantage. We manufacture and
supply the soft starters.
LIQUID ROTOR RESISTANCES:
These are used for inserting External Resistance in the Rotor - Circuit of Slip-ring
Induction Motor at the starting to reduce starting - current and increase starting - torque.
Used in various Industries & Installations like: Cement Plants, Rolling Mills, Pumping Plants,
Sugar Mills and Paper Plants. We manufacture and supply Liquid Rotor Resistances with
both motor- operated or manually - operated mechanism.
These give Step - Less cutting of resistance and are economical in comparison to Wire -
Wound or Grid - Resistances. We also manufacture all type LT Stator- Rotor Control Panels.
LIQUID RESISTANCE CONTROLLERS :
These are used for Speed Regulation of Slip - Ring Induction Motors by varying the
Rotor Resistance of the Motor and are very commonly used in Cement Plants.
GRID ROTOR RESISTANCE & CONTROLLERS :
We also manufacture Rotor Resistance using Stainless - Steel sheets for similar applications as
Liquid Resistance and Controllers.
NEUTRAL GROUNDING RESISTORS :
We manufacture Neutral Grounding Resistor (NGR) as per Customer’s Specifications and
requirements. NGRs are used in AC Distribution Networks to Restrict Earth Fault Current to a
predetermined level. Resistance - grounding or Transformer or Generator - neutral Star- point
is the most effective and preferred method.
ENTERPRISING ENGINEERS, BHOPAL
7
AUTO - TRANSFORMER STARTERS :
Fully Automatic or Semi-automatic Push - Button - operated Auto - Transformer Starters
for 415/550 V and also 3.3 KV , AC, 3 - Phase Squirrel Cages Induction Motors up to
500HP.These are provided with , 3 - Air Break / Vacuum Contactors, Thermal Over - Load
Relay, Oil Immersed Auto-Transformer with 40%, 60%, 80%,Tappings, Timer for Automatic
Change- over , Ammeter, Voltmeter, Start & Stop Push - Button . The Contactors and Auto-
transformer are totally enclosed in separate Dust & Vermin Proof Sheet-steel enclosure
suitable for Floor-mounting ; ratio of Tapings can be varied to suit particular application.
ENTERPRISING ENGINEERS, BHOPAL
8
PRODUCT DESIGN
We have a Design - wing which processes Design and Manufacturing information for the
equipments / systems ordered on us. Most of the orders received are for tailor -made
equipment / systems, hence in each order a substantial amount of design work is involved.
This wing also takes up Development of New Products and improvement of existing
products. To cater to this requirement we have a full fledged Design - Office manned by
experienced Engineers & Draughtsman & provided with Computer - Aided - Drafting facility.
The “AUTO - CAD” and “PROMISE” Software’s are used for preparing product Design,
Drawing, Schematic and wiring Diagrams.
An Ammonia Printing Machine is also provided for taking out the Drawing Prints.
We continuously review our existing product designs and make improvements in them, this
is an ongoing - process and is needed to give us an edge over our competitors in respect of
better Design, Lower Cost and better Quality.
While designing the equipment the prime consideration is given to the aspect of ease of
operation, convenience of maintenance and extension to existing equipments. Adequate
attention is given to incorporate operator’s safety feature & aesthetic appearance of
equipment during the design stage.
Our Design Wing also prepares the user’s Operation and Maintenance Manuals for
the Equipments, manufactured and supplied by us.
ENTERPRISING ENGINEERS, BHOPAL
9
PRODUCTION FACILITIES
The Production facilities at our works are as follows:-
• Fabrication Shop
• Machine Shop
• Painting Shop
• Assembly and Wiring Shop
• Testing Section
Above facilities are adequate for the manufacture of Pressed & Machined Components,
Fabricated Assemblies etc., which are needed for manufacture of Switchgear / Control
Gear Equipments, Control and Relay Panels, Power Control Centers, Mechanical Interlocks
and Motor Starters. A Packing & Dispatch section takes care of safe packing and prompt
dispatch of manufactured products to customers.
• Fabrication Shop :-
Power Shearing Machine Compressor
Portable Shearing Machine Arc Welding Set
Power Press Brake Spot Welding Machine
Power Presses Welding Generator
Hand Presses Portable Electrical Blower
Power Hacksaw Electric Oven
Portable Hacksaw Chain Pulley Block (2 Tones)
Nibbling Machine Welding Fixtures. Sand Disc Grinder
Hand Grinder
• Machine Shop :-
Lathe Machine Bench Grinders
Special Purpose Lathe Bench / Buff Grinder
Shaping Machine Portable Drilling Machine
ENTERPRISING ENGINEERS, BHOPAL
10
Universal Milling Machine Double Column Drilling Machine
Radial Drilling Machine Drill Jigs
Templates
• Measuring Instruments for Machine Shop:-
Surface Plates Height Gauge
Straight Edges Go-Not-Go Gauges
Micrometers Depth Gauge
Vernier Calipers
• Painting Shop:-
∗ Panels are fabricated by using, as far as possible, Cold-Rolled sheet steel. After fabrication,
the entire sheet metal work undergoes Mchanical / Chemical pretreatment and painting.
∗ Seven Tank Process has been installed to derust, degrease & to Phosphatise the Sheet Steel
Fabricated Panels.
∗ Heavy M.S. Fabricated Assemblies are Shot-Blasted to remove rust and grease before
painting.
∗ Two coats of Red Oxide / Zinc Rich Primer Paint and Two coats of Synthetic Enamel Paint
are applied.
∗ Hardware used for assembly are Zinc Plated & Yellow passivated. (5-10 Microns)
• Assembly & Wiring Shop:-
Experienced Fitters and skilled Wireman with adequate tools & tackles carryout assembly and
wiring work of various products as per relevant standards
• Testing Facilities:-
Need for proper testing facilities for any electrical product cannot be underestimated.
Switchgear / Control gear products are Control - cum - Protection equipment, hence providing
the designed characteristics and verifying the same by testing are all the more essential.
The following tests are conducted at our works-
Testing & Inspection of all incoming materials.
Routine Tests such as Continuity Test, Meggaring , High Voltage Test and Operational
Tests are conducted on the manufactured assemblies and products before dispatch.
ENTERPRISING ENGINEERS, BHOPAL
11
Type testing of products is carried out in any reputed laboratory as and when required.
Heat run test upto 3000 Amps can be carried out in - house by us to confirm to IS 8623 (Part
1).
Our make Motor Control Centers and Distribution Boards have been Type - tested
for Short Circuit withstand level of 50KA for 1 Sec., to confirm to IS 823 (Part 2). Our
Control Panels have been Type - tested for Dust and Water Proof feature as per
protection clause IP-55 of IS:2147.
LIST OF TESTING FACILITIES / EQUIPMENTS
• AC Test Panel
• DC Test Panel
• High Voltage Tester 2.5/5/50 KV
• Temperature Rise Test Setup for Current up to 2000 Amps
• Current Injection Tester 100 Amps
• Milli Volt Ampere Tester
• Tong Testers
• Phase Sequence Tester.
• Wheat Stone Bridge
• Earth Tester
• Insulation Tester - Meggar 500/1000 V
• Ohm Meter
• Digital Millimeter
• Paint Thickness Measuring Tester
ENTERPRISING ENGINEERS, BHOPAL
12
DESIGN & CONSTRUCTION FEATURES OF CUBICLES / PANELS / DESKS
The Panels / Cubicles are of fabricated, self standing construction or wall mounting type
construction as required. Desks have self standing construction.
The Panels / Cubicles / Desks can be provided with Front - Door, Back - Door or Front and Back
Door access.
MCC (Motor Control Centers) are available in Draw out - type as well as Fixed - type versions.
Cubicles are of modular type construction thus future extension to existing Boards can easily be
done. Bus - bars, Main - connections and Auxiliary - wiring in Cubicles / Panels/ Desks is carried
out confirming to IS-375. Any special requirement of customer like Special Terminals, PVC
Channels for supporting auxiliary wiring etc. is also met.
Type Test have been carried out to meet following requirement:-
∗ Dust & Water Protected to IP-55 to IS-2147.
∗ Short Circuit Protection Level of 40KA for 1 Sec to IS 8623 (Part 2)
∗ Heat run test upto 3000 Amps. to IS 8623 (Part 1)
The routine Tests as per relevant National/International Standards are carried out.
Acceptance Tests as per agreement with the customer are carried out.
ENTERPRISING ENGINEERS, BHOPAL
13
QUALITY CONTROL
The proper functioning and appearance of the equipment manufactured in a factory depends
upon the Quality Control of Components / Sub Assemblies at all stages. To meet this quality
requirement, a separate Quality Control and Inspection Section, manned by qualified and
experienced Engineers and Supervisors, is established.
The Bought out material and Fitments are inspected at the incoming stage. Manufacturer’s
Test Certificate where required are also obtained in support of the tests carried out at our
vendor’s works.
The fitments like Instruments, Switches, Contactors, etc are procured from reputed suppliers
to ensure trouble - free service and long - life. Only the fitments confirming to National /
International Standards are procured.
We also obtain and implement the comments of our valued customers in respect of Quality
improvement.
All the new products developed are made to undergo the Type Test as per National /
International Standards in the National Level Laboratories and Test Certificates are
obtained for record. The Routine Tests as per applicable product standard are carried
out on all the products manufactured and the records kept. Each product manufactured
undergoes a thorough inspection and testing before being cleared for dispatch and a
record of such inspection is kept.
Feedback from our customers’ is also obtained on any problem faced by them with our
products. These feed-backs are analyzed to find the reason for problems and solutions are
worked out to eliminate the same. Our associations with large companies like Bharat Heavy
Electricals Ltd., National Thermal Power Corporation, Power Grid Corporation of India Ltd.,
Crompton Greaves Ltd., Tata Chemicals Ltd., ACC Ltd., etc., as their regular vendor has
been instrumental in our achieving a requisite good quality level in our products.
ENTERPRISING ENGINEERS, BHOPAL
14
AFTER - SALES SERVICE
Our Products are backed - up by After-Sales Service. Products are supplied with user’s
Operation & Maintainece Manuals. The Products supplied carry an adequate warranty
against manufacturing defects and non-performance to declared parameters. We promptly
attend to any problems reported to us.
Suggestions from our valued customers for any improvement in our products are analyzed and
implemented where feasible.
We also take up servicing and renovation of the equipments / products supplied by us in the
past.
The spares for our equipments/ products are promptly supplied whenever customers want the
same.
OUR CUSTOMERS
CUSTOMER PROFILE
We cater to requirement of various types of industries and have supplied our products to
• Electric Power Generation Stations
• Electric Power Sub-Station
• Engineering Industries
• Cement Industries
• Chemical Industries
• Paper Industries
• Spinning Mills
• Water Pumping Stations
• Railways
• Coal Fields
• Electric Equipment Manufactures
• Steel Mills
ENTERPRISING ENGINEERS, BHOPAL
15
SOME OF OUR IMPORTANT CUSTOMERS
We have supplied our product to
• Bharat Heavy Electricals Limited (Bhopal, Jhansi, New Delhi, Bangalore, Haridwar, Trichy, &
Ranipet Units)
• SAIL (Rourkela, Bhilai, Bokaro, Jamshedpur, Meghahatuburu)
• National Thermal Power Corporation
• Power Grid Corporation of India Limited
• Indian Railways (Central & Western)
• Crompton Greaves Limited
• Delhi Jal Board, Delhi
• UP Jal Nigam Agra
• Tata Chemicals Limited
• Associated Cement Companies
• J.K. White Cement
• Birla Cement
• Diamonds Cement
• Jaypee Rewa Cements
• Modi Cement
• Essar Gujarat (Mumbai & Vizag)
• ALSTOM Naini (earlier GEC)
• Kirlosker Electric Company, Bangalore
• Fertilizer Corporation of India Limited
• Larson & Tubro
• Madras Cement, Chennai
• Shree Cement, Rajasthan
• UltraTech Cement,
REGISTRATION/ APPROVALS
Our Products have been inspected and approved by the following organizations
Inspection Agencies
• NTPC
• PGCIL
• Export Inspection Agencies
• RITES
• RDSO
• M.N. Dastur & Co.,
ENTERPRISING ENGINEERS, BHOPAL
16
• Mc-Nally Bharat Engineer
• Tata Project Ltd.,
• Bureau Veritas
• Crown Agent
• Loyyods
Consultants
• Holtec Consultant Engineering
• Engineers India Ltd.
• Tata Consulting Engineer
• MECON
• Enterprising Consulting Engineers
CONTACT DETAILS
M/s Enterprising Engineers
(An ISO 9001:2015 Certified Company) Plot No. 46 & 47, Sector- ‘A’, Industrial Area,
Govindpura, Bhopal (MP)-462 023, INDIA
Telefax : +91 755 2602964 / 2586684
Mobile : +91 738 990 6750 / 738 991 5027
E-mail : [email protected] ; [email protected] ; [email protected]
Website : www.enterprisingengineers.com
*************