Your remote control needs to be programmed to

operate properly. It needs to be told how to run your

television, which 'stream' it should change the

channels for, and which set top box (STB) to control.

1. Does the remote turn on/off the TV and control volume?

If YES, proceed to next question.If NO, program remote using this procedure:

a. Manually turn on the TV. (or auxiliary device)

b. Press and release the TV key.

c. Press and hold the SETUP key until the key

blinks twice and then release.

d. The TV key will stay lit. Press the POWER

key once.

e. Aim the remote at the TV and press and

release CHANNEL UP/DOWN. The remote

will auto scan at 10 second intervals. The TV

key will be on, blinking every 10 seconds.

f. If the TV turns off, a working code has been

found. Press OK once to lock in the code.

The TV key will blink twice.

g. If all codes are exhausted, the TV key will

blink fast 7 times and the search will be

terminated.

2. Can you change channels and/or see the

guide?If YES, your remote is programmed.If NO, the remote needs to be programmed to control the correct stream.

a. Be sure that the RF antenna is attached

to the REMOTE ANTENNA port on the back

of the STB.

b. On the STB, press and hold the OK

button until the STB display will read RC

REG.

c. On the remote, press and hold the STB

button for five seconds. The STB button will

light up and stay lit. Release the STB

button.

Programming Your Remote

Best Seat Help Desk24 hours a day/7 days a week

1-800-455-5958

With amazing high definition picture quality, widescreen format, and Dolby Digital surround sound, HDTV makes you feel like you’re at the movies - no matter what you’re watching! Colors will be brighter, sounds more intense, and you will see details that you can’t believe are possible. It’s TV like you’ve never experienced it before!

There are 72 HD programming channels and two premium movie HD* channels - making 74 channels! (*You must subscribe to the premium movie channel and HD to receive these channels)

You will need a HD television and ITC’s Best Seat Digital TV service for this service to work.

High Definition TV

d. On the remote, press and release the

STB button. Both the STB and the AUX

buttons will illuminate.

e. On the remote, enter number for the

stream:

-0 for infrared Stream 1 (Use “0” if the

remote will always be used in the same

room as the box or if you are using the

Entone Amulet single stream box.)

-1 for UHF Stream 1 (Channel 10)-2 for UHF Stream 2 (Channel 23)-3 for UHF Stream 3 (Channel 39)

f. On the remote, the STB button will blink

twice to indicate the registration was

successful. On the STB, the display will

read RC REG Dx to indicate the registration

was successful.

Helpful Hint: When powering up, push the STB

button every time.

Entone RemoteGuide

1-800-417-86677/30/12

Functions section by section:

Note: If you push the TV button, you will change television channels—not STB box channels—with the remote. The INPUT button will let you scroll between your input (also known as video or aux) channels, your S-Video, and HD inputs. Remember to push the STB button to regain control of your STB channels.

Your remote controls the set top box, your television set and, optionally, an auxiliary device like a DVD player or VCR. Press STB, TV or AUX to select the device you wish to operate.

DVR/PVR Instructions:

7. Phone Button - Displays Caller ID log

6. Numeric Keypad - Enter channels or other numeric information at menu prompts. MUTE - silences TV volume Note: Press VOL + to cancel MUTE

5. Navigation - To move on-screen highlights OK - To select the highlighted option

Move 12 hours at a time in the program guide: - Page Left - Page Right

4. Volume and Channel VOL +/- - Adjusts volume on TV CH / - Changes channels or pages up/down in guide LAST - Return to last channel viewed

3. Program Guide INFO - Provides information about selected program MENU - Displays system menu to access features GUIDE - Displays detailed program listings EXIT - Returns to program or to previous menu

2. Turn TV On - If the remote is set to STB, the POWER button will turn the TV and STB on together.

1. INPUT - Will change inputs on TV, only in TV mode.

PLAY, REWIND, FAST FORWARD, PAUSE, & STOP -Use these buttons to control your PVR (only on yourmain TV). You may also use these buttons to control yourVCR, if you have programmed the remote to your VCR.

To record - To record a show your are watching, press REC. - To record a future show you see on the guide, select the show on the guide and press REC or press MENU, select PVR and schedule event.

To stop recording - Press the STOP button, or choose MENU, select PVR and select RECORDINGS, highlight the program, press OK and STOP RECORDING.

To view everything you have recorded - Press MENU, select PVR. - Highlight RECORDINGS and press OK. - Make sure to scroll down when looking for title, you may have more than one page of shows stored.

To play a recorded show - Press MENU, select PVR. - Highlight RECORDINGS and press OK. - Select title you want to view, press OK, then press PLAY RECORDINGS.

To delete a recorded show - Press MENU, select PVR. - Highlight RECORDINGS and press OK. - Select title you want to view, press OK, then press DELETE RECORDINGS and follow instructions.

Important: Each of your remote battery covers are labeled 1, 2, or 3.Each remote will correspond with a different TV.

Play

Stop

Record

Pause

Fast Forwardor Rewind(press again to go faster)

DVR/PVR Buttons

Whole Home DVR Instructions:PLAY or RECORD - Using the DVR instructions above, you can play orrecord content from any TV in your home with a set-top box. You can still pause and rewind live TV from your main TV and you can also record and play HD shows on the TVs with HD programming.

Controlling Your Remote

8. Record-it Button - Displays your DVR recordings

Bu

tto

ns

rese

rve

d fo

r fu

ture

use

.

Quick Reference GuideYour Stream 1 TV should be set to ____ and used with remote #1.Remote #1 has been programmed to code ____.

Your Stream 2 TV should be set to ____ and used with remote #2.Remote #2 has been programmed to code ____.

Your Stream 3 TV should be set to ____ and used with remote #3.Remote #3 has been programmed to code ____.

For a complete guide on how your system works, please visit ITC’s website at www.itc-web.com.Under Digital TV, look for the overview tab.