entry & interior door hardware - us.hoppe.com · hbl - terms & conditions terms and...
TRANSCRIPT
Distributor:
Entry & Interior Door Hardware
Technical Catalog Edition 2
HOPPE North America, Inc.205 E. Blackhawk DriveFort Atkinson, WI 53538-1268
920-563-2626920-563-4408
HOPPE North America, Inc.6345 Netherhart RoadUnit #1Mississauga, ON L5T 1B8CANADA
905-564-7344905-564-7301
1/08/1000
NOTE: All Information is for reference only and subject to change without notice.
• Coordinated designs and finishes available in 5 different series for allresidential openings.
• Comfortable, ergonomic feel that operates with minimum motion.• Cylindrical locks for interior and entry doors fit standard 2 1/8" bore
preparation.
• Quick and easy installation due to pre-assembled components.
• Non-visible screws for most functions.
• Ten different finishes on solid brass.
• Resista® finishes have a Limited LIfetime Finish Warranty.
81
HBL - Terms & Conditions
TERMS AND CONDITIONS GOVERNING SALES
1. Governing Provisions. These Terms and ConditionsGoverning Sales (the “Agreement”) constitute an offer by HOPPENorth America, Inc. (“Seller”) to provide the goods described herein(the “Products”) to the buyer to which this offer is addressed(“Buyer”), subject to the terms and conditions set forth herein. Buyermay not modify, change, renounce or waive any term or conditionhereof or any of Seller’s rights or remedies hereunder, unless Sellerconsents thereto in writing. Seller agrees to provide the Products toBuyer only on the terms of this Agreement, notwithstanding anylanguage in Buyer’s purchase order, if one exists, or other writing ororal representation previously or hereafter received by Sellerpurporting to amend, modify or replace the terms of this Agreementwith any different or additional terms or reciting that provision ordelivery of the Products or any other action or inaction by Sellerconstitutes agreement or consent by Seller to such amendment,modification or replacement. SELLER’S AGREEMENT TO PROVIDETHE PRODUCTS IS EXPRESSLY CONDITIONED ON BUYER'SASSENT TO ALL OF THE TERMS AND CONDITIONS SET FORTHHEREIN.
2. Acceptance. Buyer shall be deemed to have made anunqualified acceptance of this Agreement, on the earliest to occur ofthe following: (a) Seller's receipt of a copy of this Agreement signedby Buyer; (b) Buyer’s payment of any amounts due under thisAgreement; (c) Buyer’s receipt of the Products; or (d) any other eventconstituting acceptance under applicable law.
3. Cancellation or Modification. Buyer may not cancel ormodify its order except upon terms accepted by Seller in a writingsigned by Seller’s authorized officer. In the event of such cancellationor modification, Buyer shall compensate Seller for all costs anddamages resulting therefrom, including, but not limited to, out-of-pocket expenses, lost profit, allocable overhead and all otherincidental and consequential damages.
4. Taxes. Buyer shall pay any tax, duty, custom, inspectionor testing fee or any other fee or charge imposed on, in connectionwith or measured by the transaction between Seller and Buyer inaddition to the prices quoted or invoiced.
5. Schedules; Delay. All delivery dates hereunder areapproximate. Seller shall not be liable to Buyer for delays in deliverydue to state of war, riot, civil disorder, fire, strikes, work slow-downs,accidents, actions of government or civil authority, delay intransportation, energy failure, equipment breakdown, delay ofsuppliers, inability to obtain necessary labor, materials ormanufacturing facilities, acts of God or any causes beyond thereasonable control of Seller. In the event of any such delay, Sellershall perform such parts of the work as Seller is capable ofperforming and, even if Buyer places all or any part of the workelsewhere, Seller shall be entitled to resume such work as soon aspracticable. Buyer’s exclusive remedy for such delays, and forSeller's inability to deliver for any reason, shall be rescission of theaffected order.
6. Payment Terms. Payment terms are C.O.D. unless (a)Seller approves different terms based on a written credit or financingagreement submitted by Buyer or (b) Seller, in its sole discretion,requires payment in advance. Buyer shall pay interest on all past dueamounts at the rate equal to the lower of 1.5% per month or thehighest rate permitted by applicable law.
7. Rights Upon Default. If Buyer does not pay Seller anyamount due Seller from Buyer under this Agreement or any otheragreement when such amount is due or if Buyer defaults in theperformance of any covenant or condition of this Agreement, Sellermay, without liability to Buyer and without prejudice to Seller’s otherlawful remedies (a) terminate this Agreement, (b) declare immediatelydue and payable all Buyer’s obligations to Seller, (c) change creditterms with respect to any further work or (d) suspend or discontinueany further work until Buyer pays all overdue amounts and Buyerdeposits with Seller cash or security satisfactory to Seller coveringfurther work. Seller’s foregoing rights shall be in addition to any otherrights Seller may have and shall not prejudice any such right. Buyeragrees to reimburse Seller for all costs incurred by Seller in collectingany sums owed by Buyer to Seller.
8. Warranties and Remedy. See Finish Warranty or LifetimeLimited Mechanical Warranty supplied upon request
9. DISCLAIMER OF IMPLIED WARRANTIES. THEWARRANTY PROVIDED IS EXCLUSIVE, AND SELLER MAKES NOOTHER WARRANTY OF ANY KIND, EXPRESSED OR IMPLIED, WITHRESPECT TO A PRODUCT. SELLER HEREBY EXPRESSLYDISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITYAND/OR FITNESS FOR A PARTICULAR PURPOSE. ANY ORAL ORWRITTEN DESCRIPTION OF A PRODUCT IS FOR THE SOLEPURPOSE OF IDENTIFYING A PRODUCT AND SHALL NOT BECONSTRUED AS AN EXPRESS OR IMPLIED WARRANTY.
10. Delivery. The price quoted for the Products is F.O.B.Seller’s premises. Risk of loss for the Products passes to Buyer upondelivery. Title to the Products passes to Buyer upon Buyer’s paymentin full for the Products. The parties hereby agree that this Agreementshall constitute the security agreement required by the UniformCommercial Code (“UCC”) of the appropriate state. Buyer herebygrants Seller a security interest in the Products, wherever located, andall proceeds thereof, to secure Buyer’s payment in full for theProducts. Buyer hereby authorizes Seller to execute any UCCfinancing statement, or any other document necessary or appropriate,to protect Seller’s security interest.
11. Governing Law. The internal laws of the State of Wisconsinshall govern the rights and obligations of Seller and Buyer under thisAgreement.
12. Miscellaneous. Seller reserves the right to correct clericalor similar errors relating to price or any other term shown in thisAgreement. Invalidity or unenforceability of any term or part of thisAgreement shall not affect the validity or enforceability of theremainder of this Agreement. Failure of either party to insist, in anyone or more instances, upon performance of any term, covenant orcondition of this Agreement shall not be construed as a waiver orrelinquishment of any right granted hereunder or the futureperformance of such term, covenant or condition.
13. FINAL WRITTEN EXPRESSION. THIS AGREEMENTCONSTITUTES A FINAL WRITTEN EXPRESSION OF THE TERMSBETWEEN SELLER AND BUYER AND IS A COMPLETE ANDEXCLUSIVE STATEMENT OF THOSE TERMS. ANY NEGOTIATIONSOR UNDERSTANDINGS BETWEEN SELLER AND BUYER WHICHARE NOT CONTAINED IN THIS AGREEMENT HAVE NO FORCE OREFFECT. ANY AND ALL PURCHASE ORDERS, CORRESPONDENCEOR STATEMENTS THAT CONFLICT WITH, DIFFER FROM ORMODIFY THIS AGREEMENT SHALL HAVE NO FORCE OR EFFECT.
14. ALL INFORMATION IS FOR REFERENCE ONLY ANDSUBJECT TO CHANGE WITHOUT NOTICE.
Contents
Resista® Finish Page
Handing Page
München Series Page
New Orleans Series Page
Ródos Series Page
Toronto Series Page
Verona Series Page
Deadbolt
Accessories
Page
Function & Door Prep
Page
Tools
Page
Glossary
Page
Page
Call 1-888-485-4885 www.us.hoppe.com
Resista® Finish
Handing
Resista® - The HOPPE Surface GuaranteeAll HOPPE brass handles are manufactured using
the finest quality brass alloys. The surface of thehandle is protected by a transparent enamel finishwhich offers strength, intensity and durability, as well asa smooth, blemish-free surface.
HOPPE’s Resista® program of finishes is availableon selected solid brass handle sets and protectsagainst tarnishing, peeling and cracking for a rich lustrethroughout. All Resista® finishes are indicated by an “R”after the handle color code and are covered with ourResista® Finish Limited Lifetime Warranty which isexplained on page 80.
It is important to remember to use water and a softcloth to clean brass. Do not use brass cleaner,detergents or chemical cleansers as they may removethe protective coating.
Door handing is always determined from the exterior.Inswing or outswing does not determine handing.
Exterior LH Interior RH
Call 1-888-485-4885 www.us.hoppe.com
HBL - München Series
65m
m (2
.56)
8mm (0.30)10
mm
(0.3
9)
59m
m (2
.34)
26m
m (1
.01)
114mm (4.49)
126mm (4.96)
33m
m (1
.29)
Privacy Set RH Shown
Passage Set LH Shown
MünchenSolid BrassM112PL/3939
Oil-Rubbed Satin RusticDescription Handing Backset Brass Nickel Umber
(F79) (F42-R) (F8709)
Passage Set F75 Function60mm
1939685 1939706 2637283RH (2.375)
70mm1939765 1939781 2637291
M112PL/3939 (2.75)60mm 1939853 1939870 2637304
LH (2.375)70mm 1939984 1940002 2637312(2.75)
Privacy Set F76 Function60mm
1941275 1941291 2637671RH (2.375)
70mm1941355 1941371 2637689
M112PL/3939S (2.75)60mm 1941110 1941136 2637700
LH (2.375)70mm 1941195 1941216 2637718(2.75)
Dummy Set FunctionM112PL/3939/3940
- - 1941435 1941451 2639772Pair Fixed Dummy
RH - 1941591 1941611 2639596M112PL/3939Exterior Single Fixed LH - 1941515 1941531 2639588
All Standard sets, except Dummys, include both radius and square cornered faceplates and strikes.All sets except Single Fixed Dummys are for 35mm (1.375) and 45mm (1.75) door thicknesses.
Call 1-888-485-4885 www.us.hoppe.com
HBL - New Orleans Series
New OrleansSolid BrassM1610/3939
Privacy Set RH Shown
8mm (0.30)
10m
m (0
.39)
60m
m (2
.37)
27m
m (1
.08)
105mm (4.13)
65m
m (2
.56)
117mm (4.62)
27m
m (1
.06)
Oil-Rubbed Satin RusticDescription Handing Backset Brass Nickel Umber
(F79) (F42-R) (F8709)
Passage Set F75 Function60mm
1943916 1943932 2637321RH
(2.375)70mm
1943991 1944011 2637339M1610/3939
(2.75)60mm
1943756 1943772 2637347LH
(2.375)70mm
1943836 1943852 2637355(2.75)Privacy Set F76 Function
60mm1944556 1944572 2637726
RH(2.375)70mm
1944636 1944652 2637734M1610/3939S
(2.75)60mm
1944396 1944417 2637742LH
(2.375)70mm
1944476 1944492 2637769(2.75)Dummy Set Function
M1610/3939/3940- - 1944775 1944791 2639781Pair Fixed Dummy
RH - 1944935 1944951 2639641M1610/3939Exterior Single Fixed LH - 1944855 1944871 2639633
All Standard Sets, except Dummys, include both radius and square cornered faceplates and strikes.All Sets except Single Fixed Dummys are for 35mm (1.375) and 45mm (1.75) door thicknesses.
RH and LH are the standard abbreviations for right handed and left handed. See door handing diagram on page 4.
Passage Set LH Shown
Call 1-888-485-4885 www.us.hoppe.com
HBL - Ródos Series
RódosSolid BrassM1603/3939
Privacy Set RH Shown
28m
m (1
.11)
64m
m (2
.51)
8mm (0.30)
10m
m (0
.38)
119mm (4.69)
131mm (5.16)
40m
m (1
.57)
65m
m (2
.56)
Oil-Rubbed Satin RusticDescription Handing Backset Brass Nickel Umber
(F79) (F42-R) (F8709)Passage Set F75 Function
60mm1948194 1948215 2637363
RH(2.375)70mm 1948274 1948291 2637371
M1603/3939(2.75)60mm 1948354 1948371 2637380
LH(2.375)70mm 1948434 1948451 2637398(2.75)
Privacy Set F76 Function60mm
1948995 1949015 2637777RH
(2.375)70mm
1949074 1949091 2637785M1603/3939S
(2.75)60mm
1948830 1948856 2637806LH
(2.375)70mm
1948910 1948936 2637814(2.75)Dummy Set Function
M1603/3939/3940- - 1949154 1949171 2639799Pair Fixed Dummy
RH - 1949314 1949331 2639684M1603/3939Exterior Single Fixed LH - 1949234 1949251 2639676
All Standard Sets, except Dummys, include both radius and square cornered faceplates and strikes.All Sets except Single Fixed Dummys are for 35mm (1.375) and 45mm (1.75) door thicknesses.
RH and LH are the standard abbreviations for right handed and left handed. See door handing diagram on page 4.
Passage Set LH Shown
Oil-Rubbed Satin RusticDescription Handing Backset Brass Nickel Umber
(F79) (F42-R) (F8709)
Passage Set F75 Function60mm 2306071 2311558 2637401
RH(2.375)70mm 2306097 2311620 2637419
M1020/3939(2.75)60mm 2306185 2311700 2637427
LH(2.375)70mm 2306222 2311793 2637435(2.75)
Privacy Set F76 Function60mm 2307057 2312171 2637822
RH(2.375)70mm 2307065 2312243 2637849
M1020/3939S(2.75)60mm 2307073 2312315 2637857
LH(2.375)70mm 2307081 2312382 2637865(2.75)
Dummy Set FunctionM1020/3939/3940 - - 2307090 2312454 2639801Pair Fixed Dummy
RH - 2307102 2312526 2639730M1020/3939Exterior Single Fixed LH - 2307111 2312593 2639748
All Standard Sets, except Dummys, include both radius and square cornered faceplates and strikes.All Sets except Single Fixed Dummys are for 35mm (1.375) and 45mm (1.75) door thicknesses.
RH and LH are the standard abbreviations for right handed and left handed. See door handing diagram on page 4.
Call 1-888-485-4885 www.us.hoppe.com
HBL - Toronto Series
TorontoSolid BrassM1020/3939
129mm (5.08)
32m
m (1
.26)
114mm (4.49)
65m
m (2
.56)
18m
m (0
.71)
51m
m (2
.01)
10m
m (0
.39)
8mm (0.30)
Privacy Set RH Shown
Passage Set LH Shown
Call 1-888-485-4885 www.us.hoppe.com
HBL - Verona Series
VeronaSolid BrassM151/3939
Privacy Set Shown
Passage Set Shown 8mm (0.30)
54m
m (2
.15)
21m
m (0
.83)
112mm (4.41)
124mm (4.90)
21m
m (0
.83)
Oil-Rubbed Satin RusticDescription Backset Brass Nickel Umber
(F79) (F42-R) (F8709)Passage Set F75 Function
60mm1952450 1952476 2637443
M151/3939(2.375)70mm
1952530 1952556 2637451(2.75)Privacy Set F76 Function
60mm1952783 1952804 2637881
M151/3939S(2.375)70mm
1952863 1952880 2637890(2.75)Dummy Set Function
M151/3939/3940- 1952943 1952960 2639810Pair Fixed Dummy
M151/3939- 1953022 1953049 2639756Exterior Single Fixed
All Standard Sets, except Dummys, include both radius and square cornered faceplates and strikes.All Sets except Single Fixed Dummys are for 35mm (1.375) and 45mm (1.75) door thicknesses.
StandardOil-Rubbed Satin Rustic
Description Backset Brass Nickel Umber(F79) (F42-R) (F8709)
Deadbolt Function E015260mm
1943262 1940643 2640010M452/3940S/807
(2.375)70mm
1943300 1940666 26400282.75)
65m
m (2
.56)
65m
m (2
.55)
15mm (0.58)
10mm (0.39)
28mm (1.09)
HBL – Deadbolt
Deadbolt
Exterior
Call 1-888-485-4885 www.us.hoppe.com
HBL – Accessories
Brass Full Lip Latch Strike
Brass T-Latch Strike
57m
m(2
1/4
)
41m
m(1
5/8
)
14mm(9/16)
(1 3/8)
1.20
mm
(3/6
4)
35mm
Full Lip Latch Strike Dustcap For Latch Strike
23.80mm(15/16)
57m
m(2
1/4
)
1.20mm(3/64)
12mm(1/2)
70m
m(2
3/4
)
54m
m(2
1/8
)
28.80mm(1 1/8)
28m
m(1
1/1
6)
7.37mm(11/16) 1.
20m
m(3
/64)
54m
m(2
1/8
)
70m
m(2
3/4
)
28mm (1 1/8)
4.75mm(3/16)
T-Latch Strike Underplate For T-Latch Strike Dustcap For Latch Strike
23.80mm(15/16)
57m
m(2
1/4
)
1.20mm(3/64)
12mm(1/2)
Oil-Rubbed Satin RusticBrass Nickel Umber(F79) (F42-R) (F8709)
2101227 2101243 2642998
Oil-Rubbed Satin RusticBrass Nickel Umber(F79) (F42-R) (F8709)
2101411 2101438 2643000
Full Lip Latch Strike Packs Include both Radius and Square Cornered Strikes, Screws and Dustcap
DoorThickness
35 & 45mm(1.375 & 1.75)
DoorThickness
35 & 45mm(1.375 & 1.75)
T-Latch Strike Packs Include both Radius and Square Cornered Strikes, Underplate, Screws and Dustcap
HBL – Accessories
Latch Faceplate Pack Includes both Radius and Square Cornered Faceplates and Screws
Oil-Rubbed Satin RusticBrass Nickel Umber(F79) (F42-R) (F8709)
2586421 2586404 2643051
Full Lip Latch Strike Packs Include Square Cornered Strikes and Screws
Door Oil-Rubbed Satin Rustic
Thickness Brass Nickel Umber(F79) (F42-R) (F8709)
35mm2598069 2598018 2643018(1.375)
45mm2598131 2598085 2643026
(1.75)57mm
2598202 2598157 2643042(2.25)
Latch Faceplate
Stainless Steel Full Lip Latch Strike57
mm
(2 1
/4)
41m
m(1
5/8
)
25mm( 1 )
1.25mm(3/64)
57m
m (2
1/4
)
41m
m (1
5/8
)
20.6mm (5/64)
2.28
mm
(3/3
2) 37mm (29/64)
Call 1-888-485-4885 www.us.hoppe.com
HBL – Accessories
Tubular Latch
Tubular LatchDescription Backset Brass Finish Nickel Finish
60mm 2121893 2122298Passage (2.375)
F75 Function 70mm 2122079 2122319(2.75)60mm 2122212 2122343
Privacy (2.375)F76 Function 70mm 2122247 2122394
(2.75)
HBL – Accessories
Tubular Deadbolt
Deadbolt Faceplate25mm( 1 )
41m
m
(1 5
/8)
57m
m(2
1/4
)1.25mm(3/64)
Deadbolt Faceplate Pack Includes both Radius and Square Cornered Faceplates and Screws
Oil-Rubbed Satin RusticBrass Nickel Umber(F79) (F42-R) (F8709)
2586535 2586519 2643077
Tubular Deadbolt
Backset Brass Finish Nickel Finish60mm
2122482 2122491(2.375)70mm
2122503 2122511(2.75)
Call 1-888-485-4885 www.us.hoppe.com
HBL – Accessories
Deadbolt Strike
Door Handle Shafts
28mm(1 1/8)
69m
m(2
23/
32)
54m
m(2
1/8
)
4.75mm(3/16)
Underplate For Deadbolt Strike Dustcap For Deadbolt Strike
26.90mm(1 1/16)
66m
m(2
9/1
6)
1.20mm(3/64)
26mm( 1 )
54m
m(2
1/8
)
70m
m(2
3/4
)
29mm(1 1/8)
1.40mm(1/16)
Deadbolt Strike
Standard Deadbolt Strike Pack includes both Radius and Square Cornered Strikes, Underplate, Screws & Dustcap
Oil-Rubbed Satin RusticBrass Nickel Umber(F79) (F42-R) (F8709)
2100603 2100638 2643069
8mm Door Handle ShaftFunction Door Thickness Item Number
F7535mm, 45mm & 57mm
2045667(1.375, 1.75 & 2.25)
F7635mm, 45mm & 57mm
2045667(1.375, 1.75 & 2.25)
HBL – Accessories
Bushings and Set Screws
Bushing
Gold 2004515
F7501 Steel Grey 2004523
F7502 Dark Silver 2004531
Black 2004558
Set Screw
Brass 1929591
Nickel 1987100
Black Nickel 1987097
Call 1-888-485-4885 www.us.hoppe.com
HBL – Accessories
Cylinder and Shaft Positioning Spring
HBL Body
F75, F76 Functions 2045739
Cylinder
Brass Nickel
Keyed Differently (Single) 2045851 2045860
Keyed Alike (Sets of 25) 2294621 2294639
Extended Cylinder Tail Piece for 2-1/4 Door Thickness / Part # 2122520
HBL Body
HBL – Accessories
Screws
Mounting Screw for Deadbolt, Rosette and Entry Door BackplateOil-Rubbed Satin Rustic
Description Brass Nickel Umber(F79) (F42-R) (F8709)
M5x14 1987581 1978941 2643341
Mounting Screw Pack for Strikes and Faceplates / 2 per packOil-Rubbed Satin Rustic
Countersunk Screws #8 Brass Nickel Umber(F79) (F42-R) (F8709)
19mm Long 2100822 2100831 2100822(0.75)38mm Long 2104428 2104436 2104428(1.50)
Mounting Screw Pack
Oil-Rubbed Satin RusticDoor Thickness Brass Nickel Umber
(F79) (F42-R) (F8709)
Passage F75 / Privacy F76 Function Handle Set35mm & 45mm
2100435 2100435 2100435(1.375 & 1.75)
57mm2104452 2104452 2104452
(2.25)
Deadbolt E0152 Function35mm & 45mm
2050378 2050335 2643131(1.375 & 1.75)57mm
2105068 2105050 2643149(2.25)Single Exterior Dummy Handle Set
35mm & 45mm2050239 2050239 2050239(1.375 & 1.75)
Dummy Handle Pair35mm & 45mm
2050319 2050263 2643165(1.375 & 1.75)
14.7mm (37/64)
28.6mm (1 1/8)
33m
m (1
5/1
6)
41.2
mm
(1 5
/8)
(1/4)R6.4mm
57m
m (2
1/4
)
25.4mm (1)(2) 2.5mm
(7/64)
54mm(2 1/8)
25.4mm(1.00)
25.4 mm (1)
57.2
mm
(2 1
/4)
41.3
mm
(1 5
/8)
(2) 2.8mm (7/64)
T
T / 2
4 mm (5/32)
70mm (2 3/4)60mm (2 3/8) or
16.6mm (21/32)
2.4mm (3/32)
Call 1-888-485-4885 www.us.hoppe.com
HBL – Functions & Door Preparation
Passage Set F75 Function
Door Prep
Strike Prep
14.7mm (37/64)
28.6mm (1 1/8)
33m
m (1
5/1
6)
41.2
mm
(1 5
/8)
(1/4)R6.4mm
57m
m (2
1/4
)
25.4mm (1)(2) 2.5mm(7/64)
54mm(2 1/8)
25.4mm(1.00)
25.4mm (1)
57.2
mm
(2 1
/4)
41.3
mm
(1 5
/8)
(2) 2.8mm (7/64)
T
T / 2
4mm (5/32)
70mm (2 3/4)60mm (2 3/8) or
16.6mm (21/32)
2.4mm (9/32)
Call 1-888-485-4885 www.us.hoppe.com
HBL – Functions & Door Preparation
Privacy Set F76 Function
Door Prep
Strike Prep
HBL – Functions & Door Preparation
(2) 10.3mm(13/32)
40m
m(1
9/1
6)
70mm (2 3/4)
60mm (2 3/8) or
(0.7
9)20
mm
(0.7
9)20
mm
OF ACTIVE
DOOR PREP
Dummy Passage Set
54mm(2 1/8)
25.4mm(1)
(7/64)(2) 2.5 mm
41.3
mm
(1 5
/8)
57.2
mm
(2 1
/4)
25.4mm (1)
T
T / 2
4mm (5/32)
70mm (2 3/4)60mm (2 3/8) or
8mm (5/16)
54m
m (2
1/8
)
38m
m (1
1/2
)
22mm (7/8)
28.6mm (1 1/8)
70m
m (2
3/4
)
(2) 3.5mm (9/64)
(4) R6.4mm (1/4)
(2) 2.5mm (7/64)
35.3mm (1 3/8)
7.34mm (19/64)
Call 1-888-485-4885 www.us.hoppe.com
HBL – Functions & Door Preparation
Thumb Turn & Deadbolt E0152 Function
Door Prep
Strike Prep
Call 1-888-485-4885 www.us.hoppe.com
HBL – Tools
Installation Tool Kit for Wood DoorsConsists of:3 x High Speed Spur Bits (2 1/2", 1 1/2", 1")1 x Center Marker (1")1 x Drill Fixture for 25mm (1") - 73mm (2 1/8") Door Thickness 20998501 x Quick Release Drill Adaptor (3/8") for Boring Bits4 x Router Templates including Locators forFaceplate and Strike Plate Preparation
Replacement High Speed Spur Bit
25mm (1") 2102300
54mm (2 1/8") 2102318
Call 1-888-485-4885 www.us.hoppe.com
Glossary
Astragal
Decorative center section of wood or other materialthat is attached to the inactive panel and serves as ajamb.
Backset
Distance from the surface of the lock faceplate to thecenter of the handle hole. This distance establisheswhere the handle will be mounted to the face of thedoor.
Cylindrical Lock
The part of the lock which locks a door through thetumbler and the keyway.
Deadbolt
The center locking point on the door. The deadbolt isengaged by turning the cylinder knob or engaging itwith a key.
Dummy Set
Handle is usually “fixed” in place. Handles serve onlyas pull handles and do not operate.
Exterior Single Fixed
An exterior handle, either left or right which is “fixed” inplace. Handle serves only as a pull handle and doesnot operate.
Frame
The outer casing of a door which mounts directly intothe rough opening of a wall, also known as the jamb.
Handing
Determining whether you need a left or right handedlever which normally have a curve design to them.Look at your hinges from the outside of your door. Ifthe hinges are on the left, you need a left handed lever.If the hinges are on the right, you need a right handedlever.
Handle Set
Hardware which includes handles, rosettes orbackplates and screws and may also include a cylinderto lock the door.
Handle Height
The distance from the bottom of the door panel to thecenter of the handle hole.
Interior Single Fixed
An interior handle, either left or right which is “fixed” inplace. Handle serves only as a pull handle and doesnot operate.
LH
The standard abbreviation for left handed.
Latch
The catch for the door that secures it when it is closed.
Mortise
Edge pocket for lockcase or additional locking points.
Pair Fixed Dummy
Two handles which are “fixed” in place. Handles serveonly as pull handles and do not operate.
Glossary
Passage Set
A set of lever handles which have no locking action oneither side.
Privacy Set
A set of lever handles which have either a push buttoninside and/or an emergency pin outside.
Resista® Finish
This surface guarantee protects against tarnishing,peeling and cracking of solid brass handle sets.Resista® handle sets are denoted by an “R” in the finishdescription.
RH
The standard abbreviation for right handed.
Rosette
The decorative round plate which mounts to the faceof the door with a hole to accept a handle.
Series
Handle sets which have the same lever and finish for acoodinated look.
Single Fixed Dummy
One handle which is “fixed” in place. Handle servesonly as pull handle and does not operate.
Shaft
A one piece metal unit used to mount the handles tothe door.
Stile
The upright or vertical piece of the frame of a door.
Strike
A metal piece which is mounted to the door frame.
Throw
The distance the deadbolt latch travels into the strike inthe jamb.
Thumbturn
The small knob on the inside of the handle set whichoperates the deadbolt.
Thumbpiece
The part of the grip handle which when depressedopens the handle set.
Distributor:
Entry & Interior Door Hardware
Technical Catalog Edition 1
HOPPE North America, Inc.205 E. Blackhawk DriveFort Atkinson, WI 53538-1268
920-563-2626920-563-4408
2/18/Web