Telecom., Control Systems & Environmental engineering

2Kenya: HPPs automation and remote systems

CORE Palermo

CORE Glasgow

USA: CORE Portland

Tunisia: Distribution delegate dispatch

Spain: META projects

SpainMETA ProjectSTAR ProjectCORE ToledoPRODITEL

SCADA Kenia

Smart Grids Qatar

CORE Spain, USA, UK, Italy - Renewables

Iberdrola WF Telecommunications: Spain,

Europe, Mexico, USA, UK

STAR project (IBD Spain) & Smart Grids Qatar

Algeria: BCC Constantine

BCC Constantin

SCADA Distribution -Arequipa

SCADA Distribution SEAL- Peru

Iberdrola: Fiber Optics and Telecom Solutions

Telecommunications, Control Systems & Environmental engineering

Environmental engineering:Spain, UK, Peru and more

3Control & RegulationTelecontrolTelecommunications and Smart grid

Telecommunication solutions for operation of

electrical installations Definition &

implementation of pilot projects

Feasibility studies: technical analysis

and CBA (cost-benefit analysis)

Renewable energy control center

Control & protection systems of

hydropower plants

Dam emergency plans

Telecommunications network deployment

Generation delegate dispatch

SCADA Systems

Hardware/Software Development

Solutions

Types of projects:Engineering studies, EPC, EPCM

High technical knowledge and capabilities required to fully develop the projects. Continuous training and innovation.

Telecom. & Control Systems: Capacities

Telecom Solutions for other industries: Transportation, etc.

Electrical market access systems

Speed and voltage regulators

Ability to work with major manufacturers of PLCs, regulators, relays system, etc.

Definition & implementation of roll-out projects

I+D+I projects

4Telecom. & Control Systems: ReferencesProject Country Customer Description Scope Start-up

Qatar Smart Grid Qatar Kahramaa Smart grids Feasibility study & CBA 2015

Control & Telecom. Centre Algeria Sonelgaz

Upgrading of the electrical grid in the region of Constantine EPC 2013

CORE UK UK Scottish Power Renewables Renewable energy control center EPCM 2011High Speed Train Vigo-La Corua Spain ADIF

Energy remote control and telecommunication EPC Since 2010

CORE USA USA Iberdrola Renewables Renewable Energy Control Centre EPCM 2010SCADA systemHPPs Kenya Kengen

Upgrading of the control system of the main HPs EPC 2010

STAR Project Spain Iberdrola Distribution Smart grids EPCM Since 2010Metro lines: L1, L5 y L11 Spain MINTRA Madrid Metro telecommunications EPC 2007

Delegate Dispatch Spain Iberelica Wind farm delegate dispatch EPC 2008

AVR Aguayo HPP Spain EON Voltage regulators replacement EPC 2009National Distribution Centre Tunisia STEG

Upgrading of the National Distribution Grid EPC 2005

Voltage & speed regulators Spain

Iberdrola Generation

Replacing voltage and speed regulators EPC Since 2003

CORE Toledo - SCADA system Spain

Iberdrola Renewables Renewable Energy Control Centre EPCM 2003

Meta Project Spain Iberdrola GenerationAutomation and Control of

58 HPs EPCM 2002

Telecommunications Spain Iberdrola Development of Iberdrola Spain's communications network EPC/EPCM Since 1995

EPC = Engineering Procurement and ConstructionEPCM = Engineering Procurement and Construction ManagementSCADA = Supervisory Control And Data Acquisition

HPs = Hydroelectric plantsCMDS = Monitoring, diagnosis and simulation centreCBA = cost-benefit analysis

5CORE Control centre for renewable energies The largest SCADA application in the World (of renewable energies)

BASIC DATA

Location: Toledo (Spain)Client: Iberdrola

Start Date: 2002

Commercial Operation 2003

MAIN TECHNICAL CHARACTERISTICSOn-line system designed to gather, monitor and archive all wind-farm information and hasspecific features for operation, analysis and maintenance of Wind Farms.Functions: Centralized operation and control in real time Control applications for energy management Centralized communication Remote control services for third parties

It was developed by Iberdrola Engineering and Construction in 2003 and is now installed in more than 150 wind farms with real-time supervision of more than 1,200,000 data

5

6NCC National Control Center IberdrolaThe largest integrated SCADA application in USA (of renewable energies)

BASIC DATA

Location: Portland y Phoenix (USA)Client: Iberdrola Renewables

Start Date: 2009

Commercial Operation 2010

MAIN TECHNICAL CHARACTERISTICSOn-line system designed to gather, monitor and archive all wind-farm information and hasspecific features for operation, analysis and maintenance of wind farms, photovoltaic plantsand substations associated to Iberdrola Renewables in USAFunctions: Centralized operation and control in real time Control applications for energy management Centralized communication Remote control services for third parties

It was developed by Iberdrola Engineering and Construction in 2010 and is now installed in more than 50 wind farms and photovoltaic plants with real-time supervision of more than 5,000,000 data,

controlling more than 5.5 GW6

7CORE UK Scottish Power Control Center

BASIC DATA

Location: Whitelee, y Cathcart (Scotland)

Client: Scottish PowerRenewables

Start Date: 2010Commercial Operation 2011

MAIN TECHNICAL CHARACTERISTICSOn-line system designed to gather, monitor and archive all wind-farm information and hasspecific features for operation, analysis and maintenance of wind farms, and substationsFunctions: Centralized operation and control in real time Control applications for energy management Centralized communication

It was developed by Iberdrola Engineering and Construction in 2010 and is now installed in more than 20 wind farms with real-time supervision of more than 250,000 data, controlling 0.8 GW

The largest SCADA application in UK (of renewable energies)

7

8CORE Italy SER Control Center

BASIC DATA

Location: Palermo (Italy)Client: SER (Societa Energie

Rinnovabili)Start Date: 2011

Commercial Operation 2013

MAIN TECHNICAL CHARACTERISTICSOn-line system designed to gather, monitor and archive all wind-farm information and hasspecific features for operation, analysis and maintenance of wind farms, and substationsFunctions: Centralized operation and control in real time Control applications for energy management Centralized communication Remote control services for third parties

It was developed by Iberdrola Engineering and Construction in 2011 and is now installed in more than 20 wind farms with real-time supervision of more than 70,000 data, controlling 0.4 GW

The largest SCADA application in Italy (of renewable energies)

8

9SCADA System Kenya

BASIC DATA

Location: Kenya

Client: KenGen

Start Date: 2007

Commercial operation: 2009

MAIN TECHNICAL CHARACTERISTICS

Modernization of Control Systems of 6 Hydro Plants in Kenya, communication links and full functionalityControl Center.Features: Modernization of instrumentation and local controls. Complete telecommunication system (VSAT links, radio and fiber-optics) Supply of 6 local SCADA systems Supply of a full-functionality Control Center, complete with historical systems, video-wall, etc. Supply of software tools for water reserve management integrated in the Control Centre.

Complex project in remote location. Iberdrola Engineering applied its wide experience in diverse fields (hydro plants upgrade, communications and control).

9

10

Modernization of distribution network - Peru

BASIC DATA

Location: Arequipa (Peru)Client: Southern Western

Electricity (SEAL)Start Date: 2004

Commercial Operation: 2005

MAIN TECHNICAL CHARACTERISTICSModernization of the electric distribution network of SEAL in the region of Arequipa, Peru, includingautomation of the network and telecommunications.Features: Adaptation of 11 Substations, with instalation of local RTUs. Communications of the 11 STs with the control center through radio UHF links. Telecontrol SCADA system and complete Control Center

A project with actions in many sites accomplished in consortium with locals companies.

10

11

Automatic Generation Control ApplicationsAGC (Automatic Generation Control) and Economic Office

BASIC DATA

Location: Cartagena (Spain),Bizkaia (Spain)Client: CC GDF CartagenaCC Bizkaia Energia

Start Date: 2005, 2009

Commercial operation 2005, 2009

MAIN TECHNICAL CHARACTERISTICSAutomatic Generation Control System for CCGT plants.Features: AGC, IS (Interchange Scheduling) Direct Communication with the Spanish System Operator (REE)

Highly dependable systems for Automatic Generation Control.

11

12

Wind Control Center Acciona - CESA

BASIC DATA

Location: Santiago de Compostela (Spain)Client: CESA-Acciona

Start Date: 2005Commercial operation: 2007

MAIN TECHNICAL CHARACTERISTICSControl Center supervising 19 Wind Farms with their substations,Features: Adaptation of substations to remote control Deployment of satellite communications network between Control Center and plants Deployment of local communications gateways (UCCs) Full Control Center with SCADA systems, video wall and historical systems (ORACLE, PI)

Complete turn-key project including adaptation of substations to remote control, communication equipment and all HW and SW of the Control Center

12

13

Delegated Dispatch Centres (Spain)

BASIC DATA

Location: Spain

Client: Iberelica, Avanzalia, etc.

Start Date: 2008Commercial operation: 2011

MAIN TECHNICAL CHARACTERISTICSCentralized Systems for management of renewable generation according to Spanish legislation.Features: Homologated by the Spanish TSO (Transmission System Operator) REE Control applications for energy dispatch in generation nodes. Support of multiple technologies (photovoltaic inverters, wind turbines, etc.)

Standardized, limited-functionality Control Centres according to legal requirements of REE for renewable energy. Expandable to a complete Control Center

13

14

Wan Development

BASIC DATA

Location: Spain

Client: Iberdrola & others

Start Date: 1998Commercial operation: Currently running

MAIN TECHNICAL CHARACTERISTICSDesign, engineering, procurement, installation and commissioning of more than 15,000 km. Fibre Optic Cable(dark fibre) and several hundreds of links with the associated transmission systems (Lighted fibre).

Current annual figures: 200 projects, 250 Km aerial fibre optic cable, 120 Km of underground fibre-opticcable, 1.500 Km of fibre alignment links, 100 links Lighted Fibre (PDH, SDH, DWDM, GbEth, etc.)including civil works.

Different types of customers: Cable network operators, mobile operators, end users, etc. Engineering: Identification and study of alternative routes, depending on the owner and the type of

infrastructure (airlines, pipeline, inside buildings, galleries, collectors, water channels, etc.). Preparationproject dark fibre optic link or transmission.

Running installation jobs: Civil works, cable installation, auxiliary to the fibre optic elements (patchpanels, huts, junction boxes, etc.) and installation and commissioning of telecommunication equipment.

Turnkey Projects: Including permits management.

14

15

Telecommunications solutions for renewables

BASIC DATA

Location: Spain & 11 other countries

Client: Iberdrola & others

Start Date: 1999Commercialoperation: Currently running

MAIN TECHNICAL CHARACTERISTICSDesign, engineering, procurement, installation and commissioning of Telecom Solutions for RenewableGeneration Plants, including telecommunication system for:

Real-Time systems: SCADA and Regulation Systems. Protection and Measurement Systems. Monitoring Systems for Distribution and Transportation, accordingly with Country network code. Telecommunication network for for Control Centres.Using all media and technologies: Fibre, Radiocommunications, Satellites LEO y GEO, PLC. Historical figures: Over 200 Wind Farms and 120 Substations linked with control centres and offices in

Spain, Portugal, France, Poland, Hungary, Italy, Greece, Romania, USA, Mexico and Brazil. Different types of customers: Normally Iberdrola Renewable but others. Special Projects: Telecommunications for 8 control centres of Renewable, including design, supply, and

commissioning of network access systems, security and redundancy systems.

15

16

Engineering support for Star Project (smart grid Iberdrola)

BASIC DATA

Location: Spain

Client: Iberdrola

Start Date: 2010

Commercial operation: Currently running

MAIN TECHNICAL CHARACTERISTICS

Engineering support for the deployment, operation and maintenance of Project STAR (System forTelemetering, management and Automation of the Grid), Smart Grid Project of Iberdrola Distribution,engineering functions are developed in the following areas :Planning and Project Management, Secondary Cells, Automation Cells, Certification and standardization,Field Telecommunications Support and in Level 3, PRIME Telecommunications Network AccessTelecommunications Network Acceptances, Protections, Telecommunications Network Design andPlanning, associated fibre Optics works, training of operation and maintenance.

16

17

Smart grid feasibility study and pilot project (Qatar smartgrid project)

BASIC DATA

Location: Qatar

Client: Kahramaa(Iberdrola)Start Date: 2013

Commercial operation: Currently running

MAIN TECHNICAL CHARACTERISTICS

Iberdrola Engineering is working on meticulously surveying the Qatari grid in order to analyze the feasibilityof deploying a Smart Grid in Qatar. Results of this survey have been the following:

Technical feasibility study for Smart Grid deployment. Pilot project design that includes: Smart Metering (Electricity and Water), Distributed Energy

Resources (DER) Integration, Distribution Automation and MV monitoring. Cost-benefit analysis: using EPRIs (Electric Power Research Institute) methodology Iberdrola

Engineering has been able to calculate benefits of the Smart Grid deployment in Kahramaasnetwork. This quantification includes economic, reliability, environment and security benefits.

17

18

Participation in projects of I+D+i about smart grids

BASIC DATA

Location: Spain

Client: IBERDROLA

Start Date: 2010

Commercial operation: Currently running

MAIN TECHNICAL CHARACTERISTICSParticipation as engineering support in the development of the following projects:

PRICE (Project of Smart Grids in the Corredor del Henares). It is a project that aims to respond tothe technological challenges presented worldwide electrical systems

Grid4EU. It is an innovative project proposed by several Smart Grid energy distributors (DSO) mainlythe Czech Republic, France, Germany, Italy, Spain and Sweden in collaboration with suppliers ofelectrical services, equipment and developers

iGREENGrid. It focuses on increasing the capacity for new distributed renewable energy sources (DER)in electricity distribution networks without compromising reliability and quality of supply

DISCERN. Its main objective is to determine the optimal degree of intelligence to provide new electricitynetworks of Smart Grid benefits

ADVANCED. It aims to develop a framework to allow residential, commercial and industrial consumersparticipate in initiatives of "Active Demand" at European level

18

19

Ave Vigo Corua: Power control & telecomms

BASIC DATALocation: Spain

Client: Ministerio Fomento / ADIFStart Date/ Commissioning Fase1 (section Santiago Corua):

April 2010/ September 2012

Start Date/ Commissioning Fase2 (section Vigo Corua):

March 2013 / Currently developing

MAIN TECHNICAL CHARACTERISTICSRemote Control and monitoring of Energy Systems and fixed telecommunications associated to substations,power centres and stations Atlantic Axis Vigo Corua of High Speed

Physical Layer Network: Civil works and fiber optic development. Transport Network: SDH Transmission System Red Line and IP Multiservice Centres and Power

Stations Remote Control System Between Vigo A Corua: New Control and Operations Centre

19

20

Bureau Central de Conduite - Tunisia

BASIC DATA

Location: Tunisia

Client: STEG

Start Date: April 2004

Commercial operation: June 2008

MAIN TECHNICAL CHARACTERISTICS

Project Management (SCADA and Telecommunications) and responsible for telecommunications packageincluding design, engineering, supply of equipment, training of operation, assembly and commissioning of thetelecommunications system associated with Distribution Dispatch Tunisia.

UHF data Network: Access network of low capacity digital radio (80 repeaters and 1500 remotestations).

UHF voice Network: For mobile communications between the office and the area agents. Construction of 6 buildings: Distribution National Centre, in the Tunisian capital, and five

headquarters in the cities of Sousse, Grombalia, Jendouba, Gabs and Gafsa.

20

21

Bureau central de conduite Constantine - Algeria

BASIC DATA

Location: Algeria

Client: ABB / Sonelgaz

Start Date: June 2005

Commercial operation: January 2013

MAIN TECHNICAL CHARACTERISTICSDesign, engineering, procurement, training of operating personnel, supervision of erection and commissioningof different telecommunication networks associated to the Distribution Dispatch of Constantine region. Verycomplex since it is widely dispersed facilities in a very large territory 60.000 km2.

Microwave Network: For interconnection between the CCP (Main Control Centre) y CCS (SecondaryControl Centre). In total 11 pitches between terminal stations and repeaters.

WLL Network: Radio access network of high capacity (29 repeaters and 70 remote stations). UHF data: Access network of low capacity digital radio (29 repeaters and 1029 remote stations). UHF voice: For mobile communications between the office and the agents area (23 repeaters, 82 fixed

terminals, 219 mobile terminals and 236 portable terminals). Telephony System: 4 Switchboards for CCP and CCS network configured and with linked to the mobile

network. Telecommunications integrator: Allows direct calls between the two networks voice , UHF and

Telephony, in addition to the joint operation of these from the 4 operator stations. Sistema de telemetering for MV customers: 200 modems GSM and 200 modems by conventional

telephone line.21

22

META Project - Spain

BASIC DATA

Location: Spain

Client: Iberdrola

Starting Date: 1996

Commercial operation: 1996-2001

Scope: EPC

MAIN TECHNICAL CHARACTERISTICS

Automation of hydroelectric plants over 10MW (and some minor with special features). The number ofplants involved in the project were 58, in 4 basins. It included 141 groups, with a rated capacity of 7,956MW , representing 97% of the hydroelectric power Iberdrola. The aim of the project was the operation andsupervision of the central from a remote operation center, which made necessary the replacement ofcontrol systems, voltage regulators and turbine governors, protection, auxiliary services, etc.

Automation Hydro Power Plants

22

23

REMIN Project - Spain

BASIC DATA

Location: Spain

Client: Iberdrola

Starting Date: 2002

Commercial operation: 2007

Scope: EPC

MAIN TECHNICAL CHARACTERISTICS

Automation of Iberdrola small hydro power plants. Iberdrola Engineering developed an integrated controland protection equipment (WAD) which was installed in over 30 such power plants. The project includedthe supply and commissioning of the system.

Small Hydro Automation

23

24

Excitation system and turbine governor - Spain

BASIC DATA

Location: Spain

Client: Iberdrola

Starting Date: 2003

Commercial operation: 2013

Scope: EPC

MAIN TECHNICAL CHARACTERISTICS

Renewal of excitation systems and turbine governor in Iberdrola Hydro Power Plants.

During the last 10 years we have undertaken the replacement of equipment in more than 15 plants(Azutn, Cedillo, Conso, Villarino, Aldeadavila, La Muela, Sobradelo, etc.) with a power range for group of2-234MW.

24

25

Aguayo HPP Spain

BASIC DATA

Location: Spain

Client: EON Generacin

Starting Date: 2005

Commercial operation: 2005-2009

Scope: EPC

MAIN TECHNICAL CHARACTERISTICS

Aguayo Pumped-storage power plant, with four reversible groups 85MW each, dating from 1981. Due tobeing existing for years , and because of problems in design and maintenance, the renovation plan of thefour groups was carried out consecutively along several years. The project included engineering, supply,installation and Commissioning of the voltage regulators in the four groups.

Renewal Voltage Regulators

25

26

Soft Starter Gabriel y Galn HPP - Spain

BASIC DATA

Location: Spain

Client: Iberdrola

Starting Date: 2012

Commercial operation: 2014

Scope: EPC

MAIN TECHNICAL CHARACTERISTICS

Installation of a new Soft Starter for the unique group of Gabriel y Galan Pumped-storage power plant.The project included:

Supply new turbine governor, excitation system and protection relays. Performing engineering adaptation of new equipment supplied to the installation. Removal of the old systems and installation of all the new equipment supplied. Performing the commissioning of the new equipment, and assist to the commissioning of the

starter.

26

2727

Projects technical assistance

Environmental management and

sustainability

Environmental characterization and modeling

Environmental assessment

Preliminary and feasibility

environmental studies

Environmental Impact Studies

Environmental permissions

Field studies. Data Processing

Specific and in-depth studies

Weather measurement and

forecast

Environmental control & modelling system in real-time

Photochemical modeling

Advanced modelling & monitoring of air

water & noise quality

EMS design & audit

Environmental Risk Analysis

Surveillance plans and environmental

controlBiodiversity

management plans

Sustainability management plans

Waste production and management reports

Environmental Engineering: Capabilities

Over 20 years of experience in the execution of environmental studies and projects, both within the Iberdrola Group and for the customers.

Analysis of environmental requirements

Noise verification and guarantees

Implementation of environmental

monitoring systems

Inventories and management systems &

emissions reporting

CEMS installation and certification

2828

Environmental Engineering: References

Project Country Client Description Scope Start-upMeteoFlow 13 countries IberdrolaRenovables Wind production forecast System Since 2004

ARIES, PRESA Spain Iberdrola, Repsol, GDF, Gas NaturalAtmospheric Environment

Monitoring System2003-09

Start-up 2009

SUMO UK European Space AgencyHelp and support system in marine

operationsSystem. Innovation and

evidence project 2014-2016(*)

EsIA WF Mark Hill UK ScottishPower Renewables Environmental Impact StudyImpact studies and

processing 2013-14

Damhead Creek 2 CCGT UK

ScottishPower Generation

Environmental studies prior to the construction of the plant

Field studies and processing 2012-14

Projects C-10, ADI-1000 y CARPU Spain Repsol/Petronor

Impact studies on the expansion of Cartagena, Muskiz and Puertollano

refineries.Impact studies and

processing 2007-2012

Environmental Impact Studies Spain Iberdrola-Several

In more than:- 100 Wind farms- 200 Lines and Substations- 40 in Industry and Generation

Impact studies and processing 2000-2014

SGAIGlobal management

modelSeveral Iberdrola

Comprehensive Environmental Management System and Global

Model for Iberdrola

Study, design and implementation

assistance2005-2009

Meteorology & diffusion factors Spain

Nuclear Plant Almaraz. Enresa

Instrumentation monitoring and annual diffusion studies

Studies and technical assistance Since 1987

Noise modeling Peru Repsol Noise modeling on the expansion of 'La Pampilla refinery

Studies and technical assistance 2012

(*) in negotiations