WPS6 / WPS6S

Features:

EP Series

M: Mechanical speed governor, E/ECU: Electronic speed governor;NA: Naturally aspirated, TC: Turbocharged, TCA: Turbocharged and air-air aftercooled. TCW: Water-cooled Turbocharged;The weights are approximate and without fuel.

Also available in the following voltages: 415/240V-380/220V-220/127V-200/115V; ESP: Standby Power Standby duty, operation under variable load, without over load;PRP: Prime Power-Continuous duty operation, under variable load 24/24h-10% over load permissible 1 hour/12 hours;The data is only for your reference but not for use of sales.

Ratings at 0.8 power factor.

Generating Set Model Prime Standby

WPS6/S 5.8kVA/4.7kW 6.4kVA/5.1kW

Output Ratings

Ratings and Performance Data Dimensions and Weights

Dry = With Lube Oil Wet = With Lube Oil and Coolant

Length (L)mm (in)

Width (W)mm (in)

Height (H)mm (in)

Drykg (lb)

Wetkg (lb)

GeneratingSet Model

WPS6

WPS6S

1250 600 1000 300

1800 928 1250 600

Prime

Standby

WPS6

WPS6S

WPS6

WPS6S

Engine Make & Model:

Alternator Brand:

Alternator Model:

Frequency & Phase:

Control System:

Circuit Breaker Type:

Noise Level@7m:

Engine Speed: RPM

Structure Type:

Fuel Tank Capacity: L

(100% Load)Fuel Consumption: l/hr

/

/

• Excitation system: self-excited (AREP and PMG are optional)

• ATS (automatic transfer switch) receptacle

• Lockable battery isolator switch

• Stainless galvanized zinc plates with strong

corrosion resistance

• Vibration isolators between the engine/alternator

and base frame

• Integrated wiring design

• Base fuel tank for at least 8 hours running

• Equipped with an industrial muffler

• Engine oil pump

• 50℃ radiator

• Top lifting and steel base frame with forklift holes

• Drainage for fuel tank

• Complete protection functions and safety labels

• IP54 (soundproof sets), IP56 (control system)

• Water jacket preheater, oil heater and double air

cleaner, etc. are available.

403D-07G

ECP28-2VS/4

MECC

PLC-920 / PLC-7420

/

/

50Hz & 3PH

1500

D

RS

60

80

/

/

WPS6 / WPS6SEP Series

Engine model: 403D-07G

Powered by your needsThe Perkins 400D range has been developed in consultation with ourmarketplace. This 0.7 litre,3 cylinder engine is one of the smallest engines offeredby Perkins, however, this ultra-compact, lightweight power unit still maintains allthe customer benefits experienced from this exciting Product range.

Compact, Clean, Efficient PowerDesign features on the 400D range of ElectropaKs ensures clean rapid starting inall conditions whilst delivering impressive performance with low operating costs ina small, efficient package size.

Lower Operating CostsApproved for operation on biodiesel * concentrations of up to 20%.Oil and filter changes are 500 hours, dependent on load factor.Engine durability and reliability, the warranty offering and ease of installationcombine to drive down the cost of ownership.

Long-term Power Solution

The 400D range of ElectropaKs has been designed to fully comply with stringent EU and EPA emissions regulations, providing an emissions compliant power solution for the future.

Fuel SystemMechanically governed cassette type fuel injection pumpSplit element fuel filter

Lubrication SystemWet steel sump with filler and dipstickSpin-on full-flow lub oil filter

Cooling SystemThermostatically-controlled system with belt driven coolant pump and pusher fan

Electrical Equipment12 volt starter motor and 12 volt 14 amp alternator with DC outputOil pressure and coolant temperature switches12 volt shut-off solenoid energised to runGlow plug cold start aid and heater/starter switch

Flywheel and Housing1500/1800 rev/minHigh inertia flywheel to SAE J620 Size 6½ HeavyFlywheel housing SAE 5 Long3000 rev/minHigh inertia flywheel to SAE J620 Size 6½ LightFlywheel housing SAE 5 Short

MountingsFront and rear engine mounting brackets

Optional EquipmentWorkshop manualParts book

Option GroupsA selection of optional items is available to enable you to prepare a specification precisely matched to your needs.

Emissions Statement

Variable Speed: Industrial and IOPU engines: Certified against therequirements of EU Stage IIIB (Directives 97/68/EC, as last amended, and 2005/26/EC, as last amended); and US EPA Tier 4 Interim (40CFR Parts 1039. NOTE Tier 4 Final will start in 2013 model year for 19-56 kW engines).Constant Speed Engines for use in Industrial, IOPU and ElectropaK applications: Certified against the requirements of EU Stage IIIA (Directives 97/68/EC, as last amended, for mobile applications); and US EPA Tier 4 Interim (40 CFR Parts 60 for stationary applications and 40CFR Part 1039 for mobile applications).

General DataNumber of cylinders 3Cylinder arrangement Vertical in-lineCycle 4 strokeAspiration Naturally aspiratedCombustion system Indirect in jectionCompression ratio 23.5:1Bore and Stroke 67x72mmDisplacement 0.761 litresDirection of rotation Anti-clockwise

viewed on flywheelCooling system Water cooledTotal coolant capacity 2.6 litresTotal lubrication 3.05 litressystem capacityLength 480 mmWidth 371 mmHeight 528 mmTotal weight (dry) 71 kg

FuelConsumption(gross)

Engine Speed1800 rev/min 3000 rev/min

g/kW hl/hr g/kW hl/hr

100%primepower 258 1.7 271 2.9

WPS6 / WPS6SEP Series

Alternator model: ECP28-2VS/4

Electrical CharacteristicsFrequencyVoltage (series star)Rated power class H

Rated power class F

Regulation with Insulation classExecution Stator windingRotorEfficiencies class H(see graph. for details)

Reactances (f. l.cl. F)

Short Circuit RatioTime Constants

Short Circuit Current CapacityExcitation at no loadExcitation at full loadOverload (long-term)Overload per 20 sec.Stator Winding Resistance (20°C) Rotor Winding Resistance (20°C)Exciter Resistance (20 °C)Heat dissipation at f.l.cl.HTelephone InterferenceRadio interferenceWaveform Distors.(THD) at f. loadWaveform Distors.(THD) at no load

Mechanical characteristicsProtectionDE bearingNDE bearingWeight of wound stator assemblyWeight of wound rotor assemblyWeight of complete generatorMaximun overspeedUnbalanced magnetic pull at f.l.cl.F

Xd Xd' Xd" Xq Xq' Xq"

2

X0

KccTd'Td"Tdo'α

%Amp.Amp.

%%ΩΩΩW

LL/LN %LL/LN %

kgkgkg

rpmkN/mm

HzV

kVAkWkVAkW

DSR

4/43/4 2/4 1/4

%%%%

0605

380 400 415 440 415 440 460 480

11 11 11 / 11,5 12,4 13,2 13,2

8,8 8,8 8,8 / 9 9,9 10,6 10,6

10 10 10 / 10,5 11 12 12

8 8 8 / 8,4 9 9,6 9,6

±1 % with any power factor and speed variations between -5% +30%

H

Brushless

12 ends

without damping cage

86,1 86,2 85,9 / 86,6 87,1 87,2 87,3

86,2 86,5 86,4 / 87 87,2 87,4 87,6

83,7 83,8 83,8 / 84,5 84,6 84,7 84,8

80,9 80,8 80,6 / 81,6 81,4 81,5 81,8

216,1 195 181,2 / 227,3 218,0 212,3 195

18,95 17,1 15,89 / 19,93 19,12 18,62 17,1

13,52 12,2 11,33 / 14,22 13,64 13,28 12,2

78,7 71 66,0 / 82,8 79,4 77,3 71

78,7 71 66,0 / 82,8 79,4 77,3 71

26,6 24 22,3 / 28,0 26,8 26,1 24

17,17 15,5 14,40 / 18,07 17,33 16,88 15,5

3,88 3,5 3,25 / 4,08 3,91 3,81 3,5

0,58 0,62 0,68 / 0,42 0,52 0,58 0,62

023>003>

0,6 0,7 0,8 / 0,4 0,45 0,5 0,6

2,3 2,4 2,6 / 2,3 2,4 2,4 2,5

1 hour in a 6 hours period 110% rated load

300

0,582

1,032

06,01 : rotatS714,0 : rotoR

1421 1409 1444 / 1424 1469 1550 1536

54 < FIT% 2 < FHT

EN61000-6-3 EN61000-6-1. For others standards apply to factory

2 / 2

3,7 / 3,7

IP 23 (other protection on request)

6309-2RS

6207-2RS

25

13,3

89

2250

3

0,05

0,022

0,91

0,018

Control System

PowerLink PLC-920 generator controllers integrating digital, intelligent and network techniques are used as the automatic control systems for diesel generators. It can carry out functions including pre-alarm, warning & electrical trip, fail monitoring and controls etc.

PLC-920 (Optional)

FEATURES

FUNCTION

Pre-AlarmEngine temperatureOil pressureOver/under voltageOver/under frequencyOver/under speedWarning & Electrical tripOver currentShort circuitErrorOver/under speedSpeed lossBattery lowBattery highMaintenanceOver currentShort circuitEngine stopCan busCharge alternator

Fail monitoringEmergency stopMultiple engage failFailed to startLow oil pressureHigh temperatureSpeed failureVoltageCharging failShutdownWarningControlsFuel and stop solenoidECU power and stopStarter motorAutomatic generator startPreheatExternal alarm hornEngine coolingIdle mode

SPECIFICATION

Parameter configuration via RS-232 serial communication; Log last 50 events & alarm information with measured values;Statistics records;Remote start/stop; Speed sensing from alternator voltage or magnetic pickup;Configurable 3 inputs and 6 outputs; ECU powers, ECU stop, STOP or fuel solenoid selection;Automatic transfer switching control and engine control; Adjustable start, load and stop timers.

Dimensions: 111mm*81mm*61mm Protection: IP65 at front panelOperating temperature: -20℃to 70℃Max. Operating current is 360mASender measurement: 0 to 1300 ohm

Panel cut-out: 81mm*70mmWeight: approximately 0.3kgDC battery supply voltage: 8 to 32VdcCT secondary: 5AAccuracy: 1%FS, resolution: 1 ohm

Gene

ral a

cces

sory

Oper

ator

Inte

rfac

eM

easu

rem

ent a

nd In

stru

men

tatio

nSh

utdo

wn

Prot

ectio

n an

d In

dica

tion

Thre

shol

d W

arni

ng&I

ndic

atio

nPa

ralle

ling

Capa

bilit

yPo

wer

Tran

sfer

Func

tion

Envi

ronm

ent

Mon

itorin

g Fu

nctio

n

Engi

neEn

gine

Alta

mat

orAl

tam

ator

Mai

ns E

xpre

ssio

n

AVRElectronic GoverningGlow plug controlCycle Cranking(MODBUS)NetworkingFault Historymanual start/stopAuto/remote startRegular TestAuto operation LEDManual operation LEDCommon Shutdown LEDCommon warning LEDFail to start LEDEmergency stop(local)Alphanumeric screenRemote start input active LEDAlarm reset Oil pressure Water Temperture Engine Speed Hours Run Number of Starts Battery Voltage Coolant Temperature 3PhaseL-L Voltage&Frequency 3phase Current Frequency kWh Apparent Power Active Power and Reactive Power Power Factor Per PhasekW, kWr Per Phase kVA Phase Voltage Output Power Grid Line Voltage Grid Phase Voltage Grid Frequency

Low Fuel Level High Fuel Level Low Oil Pressure High Water Temperature Failure to Stop Failure to Start Controlable start circles/times Overspeed Under&Over Voltage Under&Over Frequency Overcurrent Earth Leakage Reverse Power Reverse kWrLow Oil PressureLow Water TemperatureHigh Water TemperatureLow Water LevelLow/High Battery VoltageFailure to ChargeOvercurrentOverloadGenset Under/Over VoltageGenset Under/Over Frequencyunder/over SpeedHigh Engine TemperatureEarth LeakageSynchroscope(Independent Bus) Active and Reactive Power Control Synchroscope(Shared Bus) Synchronization Dector Peak Lopping

Automatic Transfer Hard Closed Transition Soft Closed Transtion Gen/Mains Breaker Gen/Mains Breaker Status Protection Speed/Voltage Control Power Indication Fuel&solenoid Valve Control Startor Control Preheating Mains Transfer Switch (Standard) Mains Transfer Switch (Emergency)Operating Temperature (-40℃-70℃) Ambient Temperature (-25℃-45℃) Humidity≤80%

Grid Over/Under Voltage Control Grid Over/Under Frequency Control Remote Start Output(Load/No-load) Optional Relay Output Remote Telecom Control with All Functions Engine Instrument Monitoring Altemator Output Instrument Monitoring Connection Point with All-around Setting For 6 Users 3 Users Input Connection Point LCD Light Control of Low Light Operation Environment Safe PIN CodeRS232/485 Interface Language Selection Multi-Language Function

MODEL

Standard Optional Impossible

PLC-920 PLC-7420

Control System function list

EP Series

WPS6 / WPS6S

EP Series

WPS6 / WPS6S

Control System

PLC-7420

Digital, intelligent controlsystem allows easier operation.

FEATURES

Microprocessor control, with high stability and credibilityMonitoring and measuring operational parameters of themains supply and gensetIndicating operation status, fault conditions, all parame-ters and alarmsMultiple protections; multiple parameters display, likepressure, temp. etc.Manual, automatic and remote work mode selectable

Real time clock for time and date display, overall runtimedisplay, 250 log entries

Overall power output display

Integral speed/frequency detecting, telling status ofstart, rated operation, overspeed etc.Communication with PC via RS485 OR RS232 interface,using MODBUS protocol

PLC-7420 is an advanced control module based on micro-processor, containing all necessary functions for protection of the genset and the breaker control. It can monitor the mains supply, breaker control. and automatically start the engine when the mains is abnormal. Accurately measure various operational parameters and display all values and alarms information on the LCD. In addition, the control module can automaticallyshut down the engine and indicate the engine failure.

EP Series

WPS6 / WPS6S

Engine Alternator Generator Set Fuel System Canopy

Exhaust System Cooling System Control Panel Voltages

● Water Jacket Preheater● Oil Preheater

Optional

● Winding Temperature Measuring Instrument● Alternator Preheater● PMG ● Anti-damp and anti-corrosion treatment● Anti-condensation heater

● Tools with the machine ● Low fuel level alarm● Automatic fuel feeding system● Fuel T-valves

● Trailer

● Oil with the machine ● Protection board from hotness

● Front heat protection● Coolant (-30°C)

● Remote control panel● PLC-920● PLC-7420● ATS

● 415/240V● 400/230V● 380/220V● 220/127V● 200-115V

Lubricating System

www.powerlinkworld.com

PowerLink reserves the right to make changes in model, technical sepcification, color, configuration and accessories without prior notice. Please contact the salesman before ordering.

EP Series / May.2013