epa1020-0612 sla battery charger datasheet

Http://www.epcharger.com

AUTOMATIC&MAINTAINS

n Features n Applications�AC100-240V input for worldwide used with wall mount plug US,EU,UK,AU Suit battery: �Perfect for charging all 6V/12V SLA/VRLA/GEL/AGM/WET battery �SLA/GEL/AGM 6V 7~60Ah�Fully automatic 5 stages charging process by MCU controlled VRLA/WET battery12V 7~40AH�2Leds indicator for battery charging 50%,100%,An independent failure indicator Car,Marine,motorcycle,electric vehicle，�6V or 12V output by switch on,Maintaining the deep cycle battery electric tools, emergency light, R/C toys, �Protections:Short circuit/OVP/OCP/Overload/Polarity reversed/Bad battery portable electronics devices，�100% full load and burn-in test field detection instrument�High efficiency,long life and high reliability�2 years warranty

n DescriptionYour EPA1020-0612 charger has the ability to automaticlly charge 6V or 12V volt lead acid battery,press the key to switch to 6V or 12V charging mode.the charger will sense the battery voltage,totally discharge battery (below 2 volts) or bad battery,the battery charger circuitry will not start due to its internal safety circuit.and the fault indicator light will flash.the charger is completely automatic and can be left on whenever input power is made available to the charger,the charger output depends on the condition of the battery It is charging,when the battery is fully charged,the indicating light will turn green and the charger will switch itself to a storage charge mode and will automatically monitor and maintain the battery at full charge

n LIGHT INDICATION LED Signal Indication 6V Lighting 12V Lighting Mode Press

Lighting Flashing Flashing Lighting Flashing Lighting

n Model EncodingEPA1020-06/12

output voltage selectable OutpowerSuit battery type(SLA,GEL,AGM,VRLA,Flooded,Wet)

20W MCU controlled 5 stages automatic battery charger EPA1020-0612 series

Bad battery50% charging50% battery100% chargingFull/maintenance

StatusFor 6V SLA batteryFor 12V SLA batterySwitched to 6V/12V Reverse polarity

Distributed by: Lex Tec Inc. 5-160 Don Park Rd., Markham On L3R 1C3 905-475-9979 www.lextec.com

YourTheThe


nSpecificationModel

DC Voltage

RATED CURRENTRATED POWERVOLTAGE RANGESTART VOLTAGECURRENT RANGEVOLTAGETOLERANCELINE REGULATIONVOLTAGE RANGEFREQUENCY RANGEEFFICIENCYAC CURRENTCHAEGINGPROCESSCHARGING MODEFOLATING CHARGECONDITIONCHARGINGINDICATOR

SUIT BATTERY

CHARGING TIMEOVER VOLTAGEOVER LOADOUTPUT SHORTEDPOLARITYREVERSEDBAD BATTERYWORKING TEMP.WORKING HUMIDITYSTORAGETEMP.,HUMIDITYCoolingwater poofIMPACT

SAFETY STANDARDSEMC STANDARDMTBFESDISOLATIONRESISTNCEMAX.TEMP.RISEWEIGHTSIZECASE

Fault LED FLASHING

2~15V>2V

±0.2A

±1%±0.5%

80%

0.35A

6V 3~40AH 12V 3~40Ah

EPA1020-06126.9V or 13.8V (selectable)

0.75A-1.5A5.5W-11W or 11W-22W

4~24H

Fault LED LIGHT/Hiccup mode,recovers automatically after fault condition is removed

30000 Hrs MIL-HDBK-217F8KV

i/p to o/p: 3000V (1 min.) < 40°C on casing 200g

20`90% RH NON-CONDENSING

IP64 Dust protected,water splashing resistance1 Meter drop test>=3times

EN60950-1,EN55022,EN6900T.B.D

7.5V(Limited) 15V(limited)


100~240VAC47~63Hz

0.6A/115 VAC 0.3A/230VAC

ENVIRONMENT

SAFETY

MECHANICAL

-10 ~ +50°C 20`90% Natural convection

-10 ~ +50°C

85*52.5*38MMPLASTIC PC 945

5 stages by MCU controlled

Fully automatically

see the LED display frame

110~140% rated output powerFault LED LIGHT/Hiccup mode,recovers automatically after fault condition is removed

OUTPUT

INPUT

FUNCTION

PROTECTION



nBlock Diagram

nCHARGING CURVES

Charging Voltage

Battery voltage Float

Charging Current under 2V

CHARGING TIME initialization soft start Bulk Absorption



epa1020-0612 sla battery charger datasheet

Documents