epoxy alternative
DESCRIPTION
Why and how to use the Tuffleye productsTRANSCRIPT
![Page 1: Epoxy Alternative](https://reader034.vdocument.in/reader034/viewer/2022052211/568c4bc91a28ab49169d8e9d/html5/thumbnails/1.jpg)
The Epoxy Alternative
no mixing ~ no waste ~ time to manipulate ~ stronger ~ no yellowing!
![Page 2: Epoxy Alternative](https://reader034.vdocument.in/reader034/viewer/2022052211/568c4bc91a28ab49169d8e9d/html5/thumbnails/2.jpg)
![Page 3: Epoxy Alternative](https://reader034.vdocument.in/reader034/viewer/2022052211/568c4bc91a28ab49169d8e9d/html5/thumbnails/3.jpg)
Let’s Create a Scud
Lay down a thread base, secure lead weight, & wire rib
![Page 4: Epoxy Alternative](https://reader034.vdocument.in/reader034/viewer/2022052211/568c4bc91a28ab49169d8e9d/html5/thumbnails/4.jpg)
Make a dubbing loop (or hand-twist) & dub the fur (or substitute) to just short of the hook eye
![Page 5: Epoxy Alternative](https://reader034.vdocument.in/reader034/viewer/2022052211/568c4bc91a28ab49169d8e9d/html5/thumbnails/5.jpg)
Wrap the copper rib & tie off at the eye – break rib off by bending it back and forth. Whip finish
![Page 6: Epoxy Alternative](https://reader034.vdocument.in/reader034/viewer/2022052211/568c4bc91a28ab49169d8e9d/html5/thumbnails/6.jpg)
Trim the dorsal surface smooth with fine scissors & brush or pick-out the fibers (legs)
Apply a small drop of Core to the dorsal surface, spread it in an even coat & cure with light.
![Page 7: Epoxy Alternative](https://reader034.vdocument.in/reader034/viewer/2022052211/568c4bc91a28ab49169d8e9d/html5/thumbnails/7.jpg)
Do not remove the slippery bonding layer. The Core won’t absorb into the fibers very deep.
![Page 8: Epoxy Alternative](https://reader034.vdocument.in/reader034/viewer/2022052211/568c4bc91a28ab49169d8e9d/html5/thumbnails/8.jpg)
Apply a small amount of Finish
![Page 9: Epoxy Alternative](https://reader034.vdocument.in/reader034/viewer/2022052211/568c4bc91a28ab49169d8e9d/html5/thumbnails/9.jpg)
Turn the fly upside down (creates a hump as the finish droops). Cure when desired shape is achieved
![Page 10: Epoxy Alternative](https://reader034.vdocument.in/reader034/viewer/2022052211/568c4bc91a28ab49169d8e9d/html5/thumbnails/10.jpg)
Remove the slippery bonding layer with paper towel and alcohol
![Page 11: Epoxy Alternative](https://reader034.vdocument.in/reader034/viewer/2022052211/568c4bc91a28ab49169d8e9d/html5/thumbnails/11.jpg)
Apply a coat of Hard as Nails if a gloss finishis desired