erebec allotherm product selection guide business … · alkyd, phenolic, polyester, polyurethane,...
TRANSCRIPT
PSG -SolventbornVanishes
Market + Technology147, Mumbai-Pune Road, PimpriPune 411 018, India.Ph: +91 (20) 30610721 / 722Fax: +91 (20) 30610792Email : [email protected] : [email protected]
Marketing Head Office & Export Office147, Mumbai-Pune Road, PimpriPune 411 018, India.Ph: +91 (20) 30610800Fax: +91 (20) 30610792Email (Export): [email protected]
ELANTAS Beck India Ltd.Northern Region:New DelhiRegional Sales Manager403, World Trade CenterBabar Road, Delhi - 110001. India.Ph: +91 (11) 23411664, 23412940Fax: +91 (11) 23413408Email : [email protected]
Eastern Region:KolkataRegional Sales ManagerRoom No. 127, Regus Business CentreThe Legacy, Level-125/A, Shakespeare SaraniKolkata- 700017, West Bengal, India.Ph : +91 (33) 4400 0500 / 9339343445Email : [email protected]
Western Region:Pune and MumbaiCorporate Office147, Mumbai-Pune Road, PimpriPune 411 018, India.Ph: +91 (20) 30610800Fax: +91 (20) 30610792Email : [email protected]
Southern Region:BengaluruRegional Sales Manager1176, 12th H.A.L. II stageBengaluru - 560 008. IndiaPh: +91 (80) 25281649, 25283093Fax: +91 (80) 25280831 Email : [email protected]
Wire Enamels
®● Terebec
● Amide imide
● Allotherm
● Nylon®
● Isonel®
● Isomid
®● Isomelt
® ● Deamelt
®● Formvar
®● Bondall
● Elmoglas
Varnishes & Resins Casting & Potting Compounds
®● Elmo
● Elmoglas®
● Elmoluft®
● Elmotherm®
● ISONEL®
● ISOPOXY
®● ELAN-Film
®● Dobeckan
®● Dobeckot
®
®● Epoxylite
®● Pedigree
● ELAN-Tron
®● ELAN-Tron
● Dobefil
● SHIMOKOTE
● SHIPAL®
● MICAREZ
lWire enamel withthermal class 105 to 220
lUL approved productsl Environment friendly
cresol free productsl Binder varnishes for
glass fibre coveredconductors
l PVF for CTC & shapedconductors
This information is intended only for general guidance in the application of our product. It has been obtained by careful investigation and represents the present state of our knowledge and experience. Because of the large number of possible methods of applications and processing, we are not able to assume responsibility in any one particular case for either the technical results or the patent rights situation applicable to the country under consideration.
Disclaimer
PS
G -
VR
- J
an
ua
ry 2
01
7
l l
l
l
l
l
l
Thermal class 105 to 200Alkyd, Phenolic, Polyester, Polyurethane, Epoxy based
Class 180 insulation film for slot liners, slot closures & ground insulation.
Impregnating, finishing, core
plate & binder varnishes + resins
Solvent Borne, Solvent less, Water Soluble
Dip, VPI, HRD, Trickle, Wet winding systems
UL approved products
®● Dobeckot
®● Dobeckan IF
● SHIMOREZ
● SHIMOCAST
l
l
l
l
l
l
l
l
l
Products based on epoxy + polyurethane
· Class 120 – 180Halogen Free ResinsFlame retardant resinsUL approved productsAvailable in unfiled + filledversion with variable viscosities +variou coloursCasting + potting resin forelectrical + electroniccomponentsEpoxy resin for diamond dotted papersAdhesives for electrical + electronic application
Product Selection GuideBusiness Line - Varnishes & Resins
Solvent born Varnishes - Overview
A member of
Market + Technology147, Mumbai-Pune Road, PimpriPune 411 018, India.Ph: +91 (20) 30610721 / 722Fax: +91 (20) 30610792Email : [email protected] : [email protected]
Marketing Head Office & Export Office147, Mumbai-Pune Road, PimpriPune 411 018, India.Ph: +91 (20) 30610800Fax: +91 (20) 30610792Email (Export): [email protected]
ELANTAS Beck India Ltd.Northern Region:New DelhiRegional Sales Manager403, World Trade CenterBabar Road, Delhi - 110001. India.Ph: +91 (11) 23411664, 23412940Fax: +91 (11) 23413408Email : [email protected]
Eastern Region:KolkataRegional Sales ManagerRoom No. 127, Regus Business CentreThe Legacy, Level-125/A, Shakespeare SaraniKolkata- 700017, West Bengal, India.Ph : +91 (33) 4400 0500 / 9339343445Email : [email protected]
Western Region:Pune Corporate Office147, Mumbai-Pune Road, PimpriPune 411 018, India.Ph: +91 (20) 30610800Fax: +91 (20) 30610792Email : [email protected]
Southern Region:BengaluruRegional Sales Manager1176, 12th H.A.L. II stageBengaluru - 560 008. IndiaPh: +91 (80) 25281649, 25283093Fax: +91 (80) 25280831 Email : [email protected]
Wire Enamels
®● Terebec
● Amide imide
● Allotherm
● Nylon®
● Isonel®
● Isomid
®● Isomelt
® ● Deamelt
®● Formvar
®● Bondall
● Elmoglas
Varnishes & Resins Casting & Potting Compounds
®● Elmo
● Elmoglas®
● Elmoluft®
● Elmotherm®
● ISONEL®
● ISOPOXY
®● Dobeckan
®● Dobeckot
®
®● Epoxylite
®● Pedigree
● ELAN-Tron
®● ELAN-Tron
● Dobefil
● SHIMOKOTE
● SHIPAL®
● MICAREZ
lWire enamel withthermal class 105 to 220
lUL approved productsl Environment friendly
cresol free productsl Binder varnishes for
glass fibre coveredconductors
l PVF for CTC & shapedconductors
This information is intended only for general guidance in the application of our product. It has been obtained by careful investigation and represents the present state of our knowledge and experience. Because of the large number of possible methods of applications and processing, we are not able to assume responsibility in any one particular case for either the technical results or the patent rights situation applicable to the country under consideration.
Disclaimer
PS
G -
VR
- J
an
ua
ry 2
01
7
l l
l
l
l
l
Thermal class 105 to 200Alkyd, Phenolic, Polyester, Polyurethane, Epoxy based
Impregnating, finishing, core plate & binder varnishes + resins
Solvent Borne, Solvent less, Water Soluble
Dip, VPI, HRD, Trickle, Wet winding systems
UL approved products
®● Dobeckot
®● Dobeckan IF
● SHIMOREZ
● SHIMOCAST
l
l
l
l
l
l
l
l
l
Products based on epoxy + polyurethane
· Class 120 – 180Halogen Free ResinsFlame retardant resinsUL approved productsAvailable in unfiled + filledversion with variable viscosities +variou coloursCasting + potting resin forelectrical + electroniccomponentsEpoxy resin for diamond dotted papersAdhesives for electrical + electronic application
l
l
l
l
Thermal class 180
UL approved Insulation system
Excellent gloss with low moisture absorption
Easy to insert
Flexible Electrical Insulation®
● ELAN-Film
Varnishes & Resins
FINAL
PSG -SolventbornVarnishes Product Designation Chemical base Thinner Viscosity by Curing Cycle Thermal Distinctive Properties
Flow cup (s) Class
Suggested Applications
IMPREGNATING VARNISHES
Elmo 65 E/R Alkyd phenolic 205 40 – 60 130 / 8 130 (B) Excellent resistance to centrifugal forces Impregnation of high speed motor armatures, drives in
chemical industry, hand tools etc.
Elmo B 92 FC Alkyd 234 40 – 60 120 / 2 130 (B) Flexible cured film, Fast curing schedule Impregnation of fan stators specially for conveyorised curing plant
Elmo B 95 Alkyd phenolic 205 40 – 60 130 / 6 130 (B) Short curing schedule Impregnation of motor stators, transformers, etc.
Elmoglas V 155 Polyurethane 218 45 – 65 140 / 14 130 (B) Resistant to refrigerant R11 & R22 Impregnation of hermetic motor stators, Binder varnish for
glass fiber tapes & sleeves
Elmotherm F 50 Isophthalic alkyd 205 50 – 70 120 / 12 155 (F) Excellent dielectric properties under moist condition, Impregnation of motor stators, rotors, generators, Aux.
good bond and adhesive strength Traction motors etc.
ISONEL 31 J Modified Polyester 31 J 115 -145 (1) 100 / 2 + 140 / 6 155 (F) Mild solvents, excellent resistance to chemicals, Impregnation of motor stators, rotors, generators etc.
UL recognized (E253938)
ISONEL 31 J FC Modified Polyester 31 J 95 - 135(1) 140-150 / 2 - 3 155 (F) Mild solvents, excellent resistance to chemicals, Impregnation of small transformers & FHP motor stators.
ISONEL 51 J FC Modified Polyester 51J 30 – 40 (1) 150 / 2 155 (H) Mild solvents, transparent coating Impregnation of small motors &transformers,
Elmotherm F 57 Isophthalic alkyd 205 40 – 60 120 / 10 155 (F) Excellent resistance to chemicals, good dielectric properties Impregnation of motor stators, rotors, generators etc.
Elmotherm FR 63 Epoxyester melamine 205 30 – 50 150 / 8 180 (H) Resistance to refrigerants and hydrolytic stability, Impregnation of hermetic motor stator
UL recognized (E253938)
Elmotherm H 71 A Polyesterimide 218 65 – 75 120 / 4 + 150 / 8 180 (H) Good bond strength at class Temperature, PTB certified, Impregnation of traction motors, dry type transformers,
(3) excellent resistance to chemicals and moisture s,
mills, motors etc.
ISONEL 51 J Modified Polyester 51J 60 – 80 (1) 120 / 2 + 160 / 6 180 (H) Mild solvents, tough and elastic cured film, Impregnation of traction motors, dry type transformers,
UL approved (E253938) generators.
ISOPOXY 800 Epoxy Aquasolv 450-600 160 / 2 180 (H) Resistant to R134A, good bond strength and hard cured film. Impregnation of windings of hermetic machines
mPa.s (2) Water soluble environmental friendly, UL approved (E253938)
ANTI TRACKING FINISHING VARNISHES
ElmoLuft 1A-.. Phenolic 234 25 – 35 RT /24 130 (B) Fast air drying, anti-tracking, Available in clear & golden Coating on PCB, SRBP components, impregnation of
small coils & stators
B 6-665 Epoxy 221 90 -200 RT/24 155(F) Single component class 155 red pigmented Anti tracking finishing coat for electrical machine
anti tracking finishing varnish
Epoxilite 213PF Epoxy 221 280 RT/24 155(F) Black colour, two component Finishing coat for alternators
Fast curing
Becktol (Red) Alkyd 234 50 – 160 RT / 24 120 (E) Air drying, anti-tracking, red pigmented Finishing coat on overhangs of stators, rotors etc.
Becktol (Grey) Alkyd 234 50 – 170 RT / 24 120 (E) Air drying, anti-tracking, grey pigmented Finishing coat on overhangs of stators, rotors etc.
Epoxy Gel coat (Red) Epoxy 221 45k – 85k (2)RT / 24 130 (B) 3 component, air drying antitracking, red coloured Overhauling of electrical machines, corrosion resistance
coating, etc
Varnish F93 (Red) Polyesterimide 217 15 – 16 RT / 24 180 (H) 2K, RT cured red coloured High heat resistance, anti-tracking
CORE PLATE VARNISHES
ISONEL CPV Alkyd phenolic CPV 115-145 350–450 / 1-2 min. 155 (F) Water soluble, good adhesion, punching quality & Coating laminations of motors, transformers,
Elmotherm WS 97 Phenolic melamine Distilled Water 70 – 90 350 – 450 / 1-2 min. 155 (F) insulation resistance hydrogenerators etc.
BINDER VARNISHES
Elmo 799 Isophthalic alkyd 231 60 – 80 120 / 120 (E) High flexibility retention after ageing Binder varnish for polyester film-glass-mica tapes
15 min
Elmoglas V155 Polyurethane 218 20 – 30 155 / 30 min – coat 1 155 (F) Hydrolytic stability, quick drying, flexible Impregnation of glass fibresleevings, tapes also binder varnish
155 / 60 min - coat 2 for glass-fibre covered wires
Elmoglas V 132-48 A Epoxy 218 30 – 40 300–400 / <3 min 155(F) Good bonding & flexibility Binder varnish for glass-fibre covered wires
Elmoglas H 69 A Polyesterimide 218 50 – 65 300–400/ <3 min 180 (H) High flexibility retention after ageing Binder varnish for polyester film-glass-mica tapes, GFCC
SPECIAL PURPOSE VARNISHES & PRODUCTS
Insulation Adhesive P80 Polyvinyl alcohol Distilled Water 10,000 – 15,000(2) RT / 4 - 8 105 (A) Good bonding, resistant to transformer oil Gluing of cotton tapes, hard boards etc.
during construction of transformers
Notes : All viscosities are by DIN 53211/ Cup 4 at 23oC (1) Viscosity at 250C by IS3944-1966/Cup No. 4 (2) Viscosity by Brookfield viscometer @ 230C acc to ISO 2555 (3) V 0visco @ 25 C sity by ISO 2431 / Cup No. 6
(oC/h)
Product Designation Chemical base Thinner Viscosity by Curing Cycle Thermal Distinctive Properties
Flow cup (s) Class
Suggested Applications
IMPREGNATING VARNISHES
Elmo 65 E/R Alkyd phenolic 205 40 – 60 130 / 8 130 (B) Excellent resistance to centrifugal forces Impregnation of high speed motor armatures, drives in
chemical industry, hand tools etc.
Elmo B 92 Alkyd 234 40 – 60 120 / 4 130 (B) Flexible cured film, Short curing schedule Impregnation of fan stators
Elmo B 92 FC Alkyd 234 40 – 60 120 / 2 130 (B) Flexible cured film, Fast curing schedule Impregnation of fan stators specially for conveyorised curing plant
Elmo B 95 Alkyd phenolic 205 40 – 60 130 / 6 130 (B) Short curing schedule Impregnation of motor stators, transformers, etc.
Elmoglas V 155 Polyurethane 218 45 – 65 140 / 14 130 (B) Resistant to refrigerant R11 & R22 Impregnation of hermetic motor stators, Binder varnish for
glass fiber tapes & sleeves
Elmotherm F 50 Isophthalic alkyd 205 50 – 70 120 / 12 155 (F) Excellent dielectric properties under moist condition, Impregnation of motor stators, rotors, generators, Aux.
good bond and adhesive strength Traction motors etc.
ISONEL 31 J Modified Polyester 31 J 115 -145 (1) 100 / 2 + 140 / 6 155 (F) Mild solvents, excellent resistance to chemicals, Impregnation of motor stators, rotors, generators etc.
UL recognized (E253938)
ISONEL 31 J FC Modified Polyester 31 J 95 - 135(1) 140-150 / 2 - 3 155 (F) Mild solvents, excellent resistance to chemicals, Impregnation of small transformers & FHP motor stators.
UL recognized (E253938)
ISONEL 51 J FC Modified Polyester 51J 30 – 40 (1) 150 / 2 155 (H) Mild solvents, transparent coating Impregnation of small motors &transformers,
Elmotherm F 57 Isophthalic alkyd 205 40 – 60 120 / 10 155 (F) Excellent resistance to chemicals, good dielectric properties Impregnation of motor stators, rotors, generators etc.
Elmotherm FR 63 Epoxyester melamine 205 30 – 50 150 / 8 180 (H) Resistance to refrigerants and hydrolytic stability, Impregnation of hermetic motor stator
UL recognized (E253938)
Elmotherm H 71 A Polyesterimide 218 65 – 75 120 / 4 + 150 / 8 180 (H) Good bond strength at class Temperature, PTB certified, Impregnation of traction motors, dry type transformers,
(3) excellent resistance to chemicals and moisture s,
mills, motors etc.
ISONEL 51 J Modified Polyester 51J 60 – 80 (1) 120 / 2 + 160 / 6 180 (H) Mild solvents, tough and elastic cured film, Impregnation of traction motors, dry type transformers,
UL approved (E253938) generators.
ISOPOXY 800 Epoxy Aquasolv 450-600 160 / 2 180 (H) Resistant to R134A, good bond strength and hard cured film. Impregnation of windings of hermetic machines
mPa.s (2) Water soluble environmental friendly, UL approved (E253938)
ANTI TRACKING FINISHING VARNISHES
ElmoLuft 1A-.. Phenolic 234 25 – 35 RT /24 130 (B) Fast air drying, anti-tracking, Available in clear & golden Coating on PCB, SRBP components, impregnation of
small coils & stators
B 6-665 Epoxy 221 90 -200 RT/24 155(F) Single component class 155 red pigmented Anti tracking finishing coat for electrical machine
anti tracking finishing varnish
Epoxilite 213PF Epoxy 221 280 RT/24 155(F) Black colour, two component Finishing coat for alternators
Fast curing
Becktol (Red) Alkyd 234 50 – 160 RT / 24 120 (E) Air drying, anti-tracking, red pigmented Finishing coat on overhangs of stators, rotors etc.
Becktol (Grey) Alkyd 234 50 – 170 RT / 24 120 (E) Air drying, anti-tracking, grey pigmented Finishing coat on overhangs of stators, rotors etc.
Epoxy Gel coat (Red) Epoxy 221 45k – 85k (2)RT / 24 130 (B) 3 component, air drying antitracking, red coloured Overhauling of electrical machines, corrosion resistance
coating, etc
Varnish F93 (Red) Polyesterimide 217 15 – 16 RT / 24 180 (H) 2K, RT cured red coloured High heat resistance, anti-tracking
CORE PLATE VARNISHES
ISONEL CPV Alkyd phenolic CPV 115-145 350–450 / 1-2 min. 155 (F) Water soluble, good adhesion, punching quality & Coating laminations of motors, transformers,
Elmotherm WS 97 Phenolic melamine Distilled Water 70 – 90 350 – 450 / 1-2 min. 155 (F) insulation resistance hydrogenerators etc.
BINDER VARNISHES
Elmo 799 Isophthalic alkyd 231 60 – 80 120 / 120 (E) High flexibility retention after ageing Binder varnish for polyester film-glass-mica tapes
15 min
Elmoglas V155 Polyurethane 218 20 – 30 155 / 30 min – coat 1 155 (F) Hydrolytic stability, quick drying, flexible Impregnation of glass fibresleevings, tapes also binder varnish
155 / 60 min - coat 2 for glass-fibre covered wires
Elmoglas V 132-48 A Epoxy 218 30 – 40 300–400 / <3 min 155(F) Good bonding & flexibility Binder varnish for glass-fibre covered wires
Elmoglas H 69 A Polyesterimide 218 50 – 65 300–400/ <3 min 180 (H) High flexibility retention after ageing Binder varnish for polyester film-glass-mica tapes, GFCC
SPECIAL PURPOSE VARNISHES & PRODUCTS
Insulation Adhesive P80 Polyvinyl alcohol Distilled Water 10,000 – 15,000(2) RT / 4 - 8 105 (A) Good bonding, resistant to transformer oil Gluing of cotton tapes, hard boards etc.
during construction of transformers
Notes : All viscosities are by DIN 53211/ Cup 4 at 23oC(1) Viscosity at 250C by IS3944-1966/Cup No. 4 (2) Viscosity by Brookfield viscometer @ 230C acc to ISO 2555(3) Viscosity by ISO2431 6mm Cup
(oC/h)
oOK. Only change the foot note 3 for varnishes profile as ISO 2431/ Cup No 6 at 25 C