errth flex for cd.pptx

Errth Flex - Resilient Performance

Exterior Finishing SystemWith

Recycled Rubber

Click Or Wait To Begin

Errth Flex Properties


ERRTH-FLEX is a Water based Acrylic

Stucco Substitute Finish that is made

with a blend of 100% acrylic resins,

premium pigments and Recycled tire

Rubber engineered to create a

coating with excellent flexibility,

durability and adhesion to many

surfaces.


This finish system bonds to the surface

forming a durable film protecting the

surface from moisture and weathering.

For use in new construction and

retrofitted projects.


• Originally developed and formulated

in Arizona

• Product has weathered climatic

conditions ranging from 30 degrees

below zero in Western Canada to 120

degrees in Arizona and Palm Desert

California

• First market – New Construction


• Loose fill – high maintenance, contamination

• Cement based material subject to cracking.

• On site mixing, inexact ratios and wide

• variations in properties.

• Needs to be painted on a regular basis.


• New Construction or Retrofits

• Pre Mixed Ready to Install

• Laboratory tested

• No Painting Costs

• Low maintenance

• High Strength – Impact Resistant

• Contains 100% recycled rubber

• Vibrant colors selection and tint selection

• Ten Year Warranty


• Water based for easy cleanup

• No on site mixing Comes in 5 Gal.

• Pails or high volume bins

• Very cost effective and user friendly

• No mud cracking

• Can be hand or machine applied

• UV Blocker

• Fire & Mildew Retardant

• Heat Reflecting Pigments

• Wide climatic region application range


• Textures:

• Smooth to

Grooves

• Colors:

• Any Color of the

Rainbow


• Insulated Concrete Forms (ICF)

• Concrete Stucco

• Masonry Block

• OSB

• Gypsum

• Polystyrene Foam

• Fiberglass Panels

• And More


• Excellent U.V. Resistance

• Low Toxicity

• Resistant U.V. Rays

• Fire Retardant

• Heat Reflector

• Great Durability

• Flexible


• Low V.O.C. / Low Odor

• Good Freeze Thaw Recovery

• Crack Resistant

• Excellent Weathering

• Base Coat With Mesh Cover Cracks

& Flaws in Substrate


• Accelerated Weathering (ASTM G-23)

No damage after 5,000 hours

continuous exposure.

• Mildew Resistance

(ASTM D3273)Passes 4 week exposure

with no growth.


Abrasion Resistance 500 Liters of sand. No effect

Freeze Thaw Resistance No cracking, checking or peeling.

Water Resistance No damaging effects.

Moisture Resistance (ASTM D-2247)No damaging effects after 14 days.

Dry Time (77 F & 50% Rel. Humidity.) To Touch: 24 to 36 hours To Recoat: 2 hours


• Twelve months when stored at an

ambient temperature of 75o F at 0 -

90% humidity.

• DO NOT ALLOW TO FREEZE.


• Base Coat with Mesh – 100 sq.

ft. / Pail

• Top Coat – 120-140 sq. ft. / Pail


• Surfaces should be free of defects and contamination. All contaminants such as dust, dirt, efflorescence, mold, mildews, adhesives, glues, oils, soaps, wax, surface sealers and medium to heavy chalk must be removed to ensure proper adhesion to the substrate. Cleaners or degreasers such as Tri Sodium Phosphate or other equal to concrete cleaners have been used successfully.

• All cleaners or removers must be rinsed entirely clean from the substrate. Chipping or peeling paint must be removed prior to application of paint. Rinse substrate thoroughly and allow to dry.


• Do not apply the Errth Flex system below 45o F. Best results are obtained when surface and air temperatures are above 50o F and below 100o F. Surfaces should unpainted, clean, dry and sound.

• Errth Flex Base Coat should cure for 24hours before the application of Errth Flex Top Coat. Times will vary due to weather conditions. Concrete surfaces must be cured for 28 days before application.


• Cleaning – Power washer or hose

• Washing – mild detergent 5:1

• No Need to Repaint or redo for 20 years or longer except to change color.

errth flex for cd.pptx

Documents