es202l_232_282mode08
TRANSCRIPT
-
8/12/2019 es202l_232_282mode08
1/94
June 2004 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/230/232/280/282ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 153
2
2.2.8 Setting mode (08) (e-STUDIO202L/232/282)
Procedure 1
* Press [FUNCTION CLEAR] to enter minus (-).
Procedure 2
Procedure 3
Procedure 4
* Press [FUNCTION CLEAR] to enter minus (-).
Procedure 5
* Press [HELP] to enter -.
The items in the setting code list can be set or changed in this setting mode (08).
(Stores value in RAM)
[0][8]
[POWER]
[POWER] OFF/ON
(Exit)
[Digital key]
(Code) [START] [Digital key]
*[FUNCTION CLEAR]
[ENTER]
or
[INTERRUPT]Sets or
changes value
[CLEAR]
(Corrects value)
[CANCEL]
[0][8]
[POWER][POWER]OFF/ON
(Exit)
[Digital key]
(Code) [START]
[ENTER]
or
[INTERRUPT]Adjustment value
cannot be changed
[0][8]
[POWER]
[POWER] OFF/ON
(Exit)[Digital key]
(Code) [START]
[CANCEL] or [CLEAR]
(Automatic setting)
[ENTER]
or
[INTERRUPT](Stores value in RAM)
[0][8]
[POWER]
[POWER]
OFF/ON
(Exit)
[Digital key]
(Code)
[Digital key]
(Sub-code) [Digital key]*[FUNCTION CLEAR]
Sets orchanges value
[START] [START]
[ENTER]
or
[INTERRUPT](Stores value
in RAM)
[CLEAR]
(Corrects value)
[CLEAR]
(Corrects value)
[START]
[CANCEL]
[0][8]
[POWER]
[POWER] OFF/ON
(Exit)
[Digital key]
(Code)
[Digital key]
*[HELP][START]
[CANCEL][ENTER]
or
[INTERRUPT]
[CLEAR]
(Corrects value)
(Stores value in RAM)Sets or
changes value
05/12
-
8/12/2019 es202l_232_282mode08
2/94
e-STUDIO200L/202L/230/232/280/282 June 2004 TOSHIBA TEC CORPORATION All rights reservedERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 154
Procedure 7
Procedure 9
Procedure 10
Procedure 11 and 12
*1. Press [MONITOR/PAUSE] to enter -, when entering telephone number.
*2. The data are stored in SYS-RAM in procedure 11 and stored in NIC-RAM in procedure 12.
Procedure 14
[0][8][POWER] [POWER] OFF/ON
(Exit)
[Digital key]
(Code)
[Digital key]
(Setting)
[CLEAR]
(Corrects value)
[START] (HDD formatting)
[CANCEL][ENTER]
or[INTERRUPT]
(Stores value in RAM)
[0][8]
[POWER]
[POWER] OFF/ON
(Exit)
[Digital key]
(Code) [Select icon][START]
[CANCEL][ENTER]
or
[INTERRUPT]
[CLEAR](Corrects value)
(Stores value in RAM)
[0][8][POWER]
[POWER]
OFF/ON(Exit)
[Digital key](Code)
[Digital key](1st setting)
[Digital key](2nd setting)
[START] [START]
[CANCEL][ENTER]
or[INTERRUPT]
[CLEAR](Corrects value)
[CLEAR](Corrects value)
(Stores value in RAM)
[0][8]
[POWER]
[POWER] OFF/ON
(Exit)
[Digital key]
(Code)
[Digital key]
or
[Software keyboard][START]
[CANCEL]
[CLEAR]
(Corrects value)
*2(Stores value in RAM)*1 [MONITOR/PAUSE]
Sets orchanges value
[ENTER]
[0][8]
[POWER][POWER]
OFF/ON
(Exit)
[Digital key]
(Code)
[Digital key]
(Sub-code)
[CLEAR]
(Corrects value)
[START] [START]
[CANCEL][ENTER]
or
[INTERRUPT]
Adjustment value
cannot be changed
05/12
-
8/12/2019 es202l_232_282mode08
3/94
June 2004 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/230/232/280/282ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 155
2
Notes: The digit after the hyphen in Code of the following table is a sub code.
e-STUDIO202L/232/282: In RAM, the NVRAM of the board in which the data of each code
is stored is indicated. M stands for the LGC board, SYS, NIC
and UTY stands for the SYS board.
Setting mode (08)
Code Classifi-
cation Items
Func-
tion
Default
RAM Contents Proce-
dure
200 General Date and time setting ALL -
- Year/month/date/day/hour/minute/secondExample:
03 07 0 13 13 27 48Day - 0 is forSunday. Pro-ceeds Mondaythrough Saturdayfrom 1 to 6.
5
201 General Destination selection ALL EUR: 0
UC: 1JPN: 2
M 0: EUR
1: UC2: JPN
1
202 Userinterface
Counter installed externally ALL 0
M 0: No external counter 1: Coin controller2: Copy key card
(This value is validonly when 2 is setto 08-201.)
3: Key copy counter
1
203 General Line adjustment mode ALL 0
M 0: For factory ship-ment
1: For line* Field: 0 must be
selected
1
204 User
interface
Auto-clear timer setting ALL 3
SYS Timer to return the
equipment to thedefault settings whenthe [START] button isnot pressed after thefunction and the modeare set0: Not cleared1 to 10:Set number x 15
sec.
1
205 Userinterface
Auto power save modetimer setting
ALL EUR: 11UC: 11JPN: 6Others:
11
SYS Timer to automaticallyswitch to the Autopower save mode whenthe equipment has notbeen used0: Invalid 6: 3min.7: 4min. 8: 5min.9: 7min.10:10min.11: 15min.12:20min.13:30min.14:45min.15:60min.
1
07/05
-
8/12/2019 es202l_232_282mode08
4/94
e-STUDIO200L/202L/230/232/280/282 June 2004 TOSHIBA TEC CORPORATION All rights reservedERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 156
206 Userinterface
Auto Shut Off Mode timersetting (Auto Shut Off
Mode/Sleep Mode)
ALL Refer tocontent
SYS Timer to turn OFF thepower or to enter the
Sleep Mode automati-cally when the equip-ment has not beenused(Refer to 08-601)0: 3min. 1: 5min.2: 10min. 3: 15min.4: 20min. 5: 25min.6: 30min. 7: 40min.8: 50min. 9: 60min.10: 70min.11: 80min.12: 90min.13: 100min.14: 110min.15: 120min.
16: 150min.17: 180min.18: 210min.19: 240min.20: Not usede-STUDIO232/282:
EUR: 7 UC: 9JPN: 0 Others: 9
e-STUDIO202L: 6
1
207 Userinterface
Highlighting display onLCD
ALL 0
SYS 0: Black letter on whitebackground
1: White letter on blackbackground
1
209 User
interface
Default setting of filing for-
mat when E-mailing
ALL 0
SYS 0: TIFF (Multi)
1: PDF (Multi)2: Not used3: TIFF (Single)4: PDF (Single)5: XPS (Multi)6: XPS (Single)
1
210 Paperfeeding
Paper size (A6-R) feeding/widthwise direction
PRT 148/105
M 10
213 Userinterface
Display of [REVERSEORDER] button
ALL 0
SYS 0: Not displayed1: Displayed
1
219 Userinterface
Default setting of filing for-mat when storing files
SCN 0
SYS 0: TIFF (Multi)1: PDF (Multi)2: Not used3: TIFF (Single)
4: PDF (Single)5: XPS (Multi)6: XPS (Single)
1
220 Userinterface
Language displayed atpower-ON
ALL EUR: 0UC: 0JPN: 5
SYS 0: Language 11: Language 22: Language 33: Language 44: Language 55: Language 66: Language 7
1
Setting mode (08)
Code Classifi-
cation Items
Func-
tion
Default
RAM Contents Proce-
dure
07/04
-
8/12/2019 es202l_232_282mode08
5/94
June 2004 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/230/232/280/282ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 157
2
221 Userinterface
Language selection in UIdata at Web power ON
ALL EUR: 0UC: 0
JPN: 5
SYS 0: Language 11: Language 2
2: Language 33: Language 44: Language 55: Language 66: Language 7
1
224 Paperfeeding
Paper size for bypass feed PPC UNDEF SYS Press the button on theLCD to select the size.
9
225 Paperfeeding
Paper size for upperdrawer
ALL EUR: A4UC: LT
JPN: A4
M Press the button on theLCD to select the size.
9
226 Paperfeeding
Paper size for lowerdrawer
ALL EUR: A3UC: LDJPN: A3
M Press the button on theLCD to select the size.
9
227 Paperfeeding
Paper size for PFP upperdrawer
ALL EUR:A4-R
UC:LT-R
JPN:A4-R
M Press the button on theLCD to select the size.
9
228 Paperfeeding
Paper size for PFP lowerdrawer
ALL EUR: A4UC: LGJPN: B4
M Press the button on theLCD to select the size.
9
229 Paperfeeding
Paper size (A3) feeding/widthwise direction
ALL 420/297
M 10
230 Paperfeeding
Paper size (A4-R) feeding/widthwise direction
ALL 297/210
M 10
231 Paperfeeding Paper size (A5-R) feeding/widthwise direction ALL 210/148
M 10
232 Paperfeeding
Paper size (B4) feeding/widthwise direction
ALL 364/257
M 10
233 Paperfeeding
Paper size (B5-R) feeding/widthwise direction
ALL 257/182
M 10
234 Paperfeeding
Paper size (LT-R) feeding/widthwise direction
ALL 279/216
M 10
235 Paperfeeding
Paper size (LD) feeding/widthwise direction
ALL 432/279
M 10
236 Paperfeeding
Paper size (LG) feeding/widthwise direction
ALL 356/216
M 10
Setting mode (08)
Code Classifi-
cation Items
Func-
tion
Default
RAM Contents Proce-
dure
05/11
-
8/12/2019 es202l_232_282mode08
6/94
e-STUDIO200L/202L/230/232/280/282 June 2004 TOSHIBA TEC CORPORATION All rights reservedERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 158
237 Paperfeeding
Paper size (ST-R) feeding/widthwise direction
ALL 216/140
M 10
238 Paperfeeding
Paper size (COMPUTER)feeding/widthwise direction
ALL 356/257
M 10
239 Paperfeeding
Paper size (FOLIO) feed-ing/widthwise direction
ALL 330/210
M 10
240 Paperfeeding
Paper size (13 LG) feed-ing/widthwise direction
ALL 330/216
M 10
241 Paper
feeding
Paper size (8.5X8.5)
feeding/widthwise direction
ALL 216/216
M 10
242 Paperfeeding
Paper size (Non-standard)feeding/widthwise direction
ALL 432/279
SYS 10
243 Paperfeeding
Memory 1Paper size (bypass feed-ing/non-standard type)feeding/widthwise direction
ALL 148/100
SYS Registers the papersize of bypass feed(non-standard type) into[MEMORY 1].
10
244 Paperfeeding
Paper size (8K) feeding/widthwise direction
ALL 390/270
M 10
245 Paperfeeding Paper size (16K-R) feed-ing/widthwise direction ALL 270/195
M 10
247 Paperfeeding
Memory 2Paper size (bypass feed-ing/non-standard type)feeding/widthwise direction
ALL 148/100
SYS Registers the papersize of bypass feed(non-standard type) into[MEMORY 2].
10
248 Paperfeeding
Memory 3Paper size (bypass feed-ing/non-standard type)feeding/widthwise direction
ALL 148/100
SYS Registers the papersize of bypass feed(non-standard type) into[MEMORY 3].
10
249 Paperfeeding
Memory 4Paper size (bypass feed-ing/non-standard type)feeding/widthwise direction
ALL 148/100
SYS Registers the papersize of bypass feed(non-standard type) into[MEMORY 4].
10
250 Mainte-nance
Service technician tele-phone number
ALL 0
SYS A telephone numbercan be entered up to 32digits. Use the [Monitor/Pause] button to enter ahyphen (-).
11
Setting mode (08)
Code Classifi-
cation Items
Func-
tion
Default
RAM Contents Proce-
dure
05/11
-
8/12/2019 es202l_232_282mode08
7/94
June 2004 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/230/232/280/282ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 159
2
251 Mainte-nance
Setting value of PMcounter
ALL Refer tocontent
M e-STUDIO200L
UC, EUR: 64,000JPN: 0e-STUDIO 230UC, EUR: 74,000JPN: 0e-STUDIO 280UC, EUR: 90,000JPN: 0
1
252 Mainte-nance
Current value of PMcounter Display/0 clearing
ALL 0
M Counts up when theregistration sensor isON.
1
253 Mainte-nance
Error history display ALL - SYS Displaying of the latest20 errors data
2
254 Paperfeeding
LT A4/LD A3 PRT 0
SYS Sets whether the data isprinted on the different
but similar size paper ornot when the paper ofcorresponding size isnot available.0: Valid (The data is
printed on A4/A3when LT/LD isselected or viceversa.)
1: Invalid (The mes-sage to use theselected paper sizeis displayed.)
1
Setting mode (08)
Code Classifi-
cation Items
Func-
tion
Default
RAM Contents Proce-
dure
05/11
-
8/12/2019 es202l_232_282mode08
8/94
e-STUDIO200L/202L/230/232/280/282 June 2004 TOSHIBA TEC CORPORATION All rights reservedERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 160
255 Paperfeeding
PFP/LCF installation ALL 0
M Sets the installation sta-tus of the PFP or LCF,
and also disables itsfunctions and the lowerdrawer of the equip-ment.When "0" is set at 08-477, specify the valuefrom 1 to 4 or 16 to 20,and when "1" is set at08-477, specify thevalue only from 32 to36.0: AutoWhen only the upperdrawer is installed asthe paper feeder of theequipment.
1: PFP upper-drawertype installed
2: PFP upper-drawerand lower-drawertype installed
3: LCF installed4: Disables PFP or
LCFWhen the upper andlower drawers areinstalled as the paperfeeder of the equip-ment.16: PFP and LCF not
installed17: PFP upper-drawer
type installed18: PFP upper-drawer
and lower-drawertype installed
19: LCF installed20: Disables functions
of PFP or LCFDisables the lowerdrawer when the upperand lower drawers areinstalled as the paperfeeder of the equip-ment.32: PFP and LCF not
installed33: PFP upper-drawer
type installed34: PFP upper-drawer
and lower-drawertype installed
35: LCF installed36: Disables functions
of PFP or LCF
1
256 Paperfeeding
Paper size setting /LCF ALL EUR: A4UC: LT
JPN: A4
M Press the button on theLCD to select the size.
9
Setting mode (08)
Code Classifi-
cation Items
Func-
tion
Default
RAM Contents Proce-
dure
05/11
-
8/12/2019 es202l_232_282mode08
9/94
June 2004 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/230/232/280/282ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 161
2
257 Counter Counter copy ALL -
- 1) Electrical counterBackup counter
(NVRAMSRAM)2) Backup counter
Electrical counter(SRAMNVRAM)(P. 2-255 "Fig. 2-7")
-
258 Mainte-nance
FSMS acceptance ALL 1
SYS Sets whether the FSMSconnection is acceptedor not.0: Prohibited1: Accepted (USB nor-
mal connection)2: Accepted (USB
forcible connection)
1
259 Network Storage period trial and pri-vate
PRT 14
SYS 0: No limits1 to 30: 1 to 30 days
31: 1hour32: 2hours33: 4hours34: 8hours35: 12hours
1
260 Network Web data retention period SCN 10
SYS When a certain periodof time has passedwithout operation afteraccessing TopAccess,the data being regis-tered is automaticallyreset. This period is setat this code.(Unit: Minute)
1
263 Userinterface
Administrator's password(Maximum 10 digits)
ALL 123456
- The password can beentered in alphabets
and figures (A-Z, a-z, 0-9) within 10 digits.
11
264 Network File retention period SCN 30
SYS 0: No limits1 to 999: 1 to 999 days
1
265 Network Maximum data capacity atE-mailing
SCN 30
SYS 2 to 30 M bytes 1
266 Network Maximum data capacity atInternet FAX
ALL 30
SYS 2 to 30 M bytes 1
Setting mode (08)
Code Classifi-
cation Items
Func-
tion
Default
RAM Contents Proce-
dure
06/09
-
8/12/2019 es202l_232_282mode08
10/94
e-STUDIO200L/202L/230/232/280/282 June 2004 TOSHIBA TEC CORPORATION All rights reservedERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 162
267 Elec-tronic
Filing
Full guarantee of docu-ments in Electronic Filing
when HDD is full
ALL 1
SYS Sets the file retentionlevel when editing the
files in the ElectronicFiling (at CutDoc/Save-Doc command execu-tion).0: Not full retained1: Fully retained -
Retains the sourcefile until CutDoc/SaveDoc commandis completed.
* The file is notdeleted even if theHDD has becomefull during the exe-cution of commandwhen 1 is set.
1
270 Elec-tronic Fil-
ing
Default value for user boxretention period
ALL 0
SYS Sets the data retentionperiod when creating auser box.0: Not deleted1 to 999: Retentionperiod (Unit: Day)
1
271 General Warning notification of theFile Share and e-Fillingpartitions are filled
ALL 90
SYS Sets the percentage ofHDD partition filledwhen warning notifica-tion is sent.0 to 100: 0 to 100%* Related code 08-
288
1
272 Scanning Notification setting of E-mail saving time limit
ALL 3
SYS Sets the days left thenotification of E-mail
saving time limitappears0 to 99: 0 to 99 days
1
273 Scanning Default setting of partialsize when transmitting E-mail
ALL 0
SYS Sets the default valuefor the partial size of E-mail to be transmittedwhen creating a tem-plate.0: Not divided1: 64 2: 1283: 256 4: 5125: 10246: 2048 (Unit: KB)
1
274 FAX Default setting of page bypage when transmittingInternet FAX
FAX 0
SYS Sets the default valuefor the page by page ofInternet FAX to be
transmitted when creat-ing a template.0: Not divide 1: 1282: 512 3: 10244: 2048 (Unit: KB)
1
Setting mode (08)
Code Classifi-
cation Items
Func-
tion
Default
RAM Contents Proce-
dure
06/09
-
8/12/2019 es202l_232_282mode08
11/94
June 2004 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/230/232/280/282ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 163
2
276 Userinterface
Default setting for densityadjustment
SCN 0
SYS 0: Automatic density1: Step -5
2: Step -43: Step -34: Step -25: Step -16: Step 0 (center)7: Step +18: Step +29: Step +310: Step +411: Step +5(1 to 11: Manual den-sity)
1
281 Userinterface
Default setting of resolution SCN 1
SYS 0: 150 dpi 1: 200 dpi2: 300 dpi 3: 400dpi4: 600 dpi
1
283 Userinterface Default setting of originalmode SCN 0 SYS 0: Text1: Text/Photo2: Photo3: Gray scale
1
284 Userinterface
Default setting of scanningmode
SCN 0
SYS 0: Single 1: Book2: Tablet
1
285 Userinterface
Default setting of rotationangle of original
SCN 0
SYS 0: 0 degree1: 90 degrees2: 180 degrees3: 270 degrees
1
286 Userinterface
Default setting of originalpaper size
SCN 0
SYS 0: Automatic1: A3 2: A43: LD 4: LT5: A4-R 6: A5-R7: LT-R 8: LG9: B4 10: B5
11: ST-R 12: COMP13: B5-R 14: FOLIO15: 13LG16: 8.5 x 8.518: A6-R19: Size mixed20: 8K 21: 16K22: 16K-R
1
288 General Searching interval of delet-ing expired flies and check-ing capacity of HDDpartitions
ALL 12
SYS Sets the search inter-val of deleting expiredfiles and checkingcapacity of HDD parti-tion.(Unit: Hour)* Related code 08-
271
1
290 Network Raw printing job (Duplex) PRT 1
SYS 0: Valid1: Invalid
1
Setting mode (08)
Code Classifi-
cation Items
Func-
tion
Default
RAM Contents Proce-
dure
05/11
-
8/12/2019 es202l_232_282mode08
12/94
e-STUDIO200L/202L/230/232/280/282 June 2004 TOSHIBA TEC CORPORATION All rights reservedERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 164
291 Network Raw printing job(Paper size)
PRT EUR: 6UC: 2
JPN: 6
SYS 0: LD 1: LG2: LT 3: COMP
4: ST 5: A36: A4 7: A58: A6 9: B410: B5 11: FOLIO12: 13LG13: 8.5 x 8.5
1
292 Network Raw printing job(Paper type)
PRT 0
SYS 0: Plain paper1: Thick paper 12: Thick paper 23: Thick paper 34: OHP film5: Tab paper
1
293 Network Raw printing job(Paper direction)
PRT 0
SYS 0: Portrait1: Landscape
1
294 Network Raw printing job (Staple) PRT 1
SYS 0: Valid
1: Invalid
1
295 Network Raw printing job(receiving tray)
PRT 0
SYS 0: Inner tray1: Finisher tray 12: Finisher tray 23: Not used4: Job Separator
upper tray5: Job Separator lower
tray* The settings 4 and 5
are effective onlywhen the Job Sepa-rator (MJ-5004) isinstalled.
1
296 Network Raw printing job(Number of form lines)
PRT 1200
SYS Sets the number ofform lines from 5 to
128. (A hundredfold ofthe number of formlines is defined as thesetting value.)
1
297 Network Raw printing job(PCL font pitch)
PRT 1000
SYS Sets the font pitch from0.44 to 99.99. (A hun-dredfold of the fontpitch is defined as thesetting value.)
1
298 Network Raw printing job(PCL font size)
PRT 1200
SYS Sets the font size from4 to 999.75. (A hun-dredfold of the font sizeis defined as the settingvalue.)
1
299 Network Raw printing job
(PCL font number)
PRT 0
SYS Sets the PCL font num-
ber.
1
300 Userinterface
Maximum number of copyvolume (MAX9)
PPC 0
SYS 0: 999 1: 992: 9
1
Setting mode (08)
Code Classifi-
cation Items
Func-
tion
Default
RAM Contents Proce-
dure
05/11
-
8/12/2019 es202l_232_282mode08
13/94
June 2004 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/230/232/280/282ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 165
2
302 Userinterface
Original counter display ALL EUR: 2UC: 0
JPN: 0
SYS Sets whether the origi-nal counter is dis-
played or not.0: Not displayed2: Displayed4: Displayed (Double-
sized original iscounted as 2.)
1
305-0 Counter Number ofoutput pagesin copier func-tion
A3 PPC 0
SYS Counts the outputpages in the copierfunction for each papersize according to thesetting for the countsetting of large-sizedpaper (08-352) and thedefinition setting oflarge-sized paper (08-353).
4
305-1 A4
305-2 A5
305-3 A6
305-4 B4
305-5 B5
305-6 FOLIO
305-7 LD
305-8 LG305-9 LT
305-10 ST
305-11 COMP
305-12 13LG
305-13 8.5 x 8.5
305-14 16K
305-15 8K
305-16 Others
306-0 Counter Number ofoutput pagesin printer func-tion
A3 PRT 0
SYS Counts the outputpages in the printerfunction for each papersize according to thesetting for the count
setting of large-sizedpaper (08-352) and thedefinition setting oflarge-sized paper (08-353).
4
306-1 A4
306-2 A5
306-3 A6
306-4 B4306-5 B5
306-6 FOLIO
306-7 LD
306-8 LG
306-9 LT
306-10 ST
306-11 COMP
306-12 13LG
306-13 8.5 x 8.5
306-14 16K
306-15 8K
306-16 Others
Setting mode (08)
Code Classifi-
cation Items
Func-
tion
Default
RAM Contents Proce-
dure
05/11
-
8/12/2019 es202l_232_282mode08
14/94
e-STUDIO200L/202L/230/232/280/282 June 2004 TOSHIBA TEC CORPORATION All rights reservedERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 166
307-0 Counter Number ofoutput pages
at list printmode
A3 PRT 0
SYS Counts the outputpages at the list print
mode for each papersize according to thesetting for the countsetting of large-sizedpaper (08-352) and thedefinition setting oflarge-sized paper (08-353).
4
307-1 A4
307-2 A5
307-3 A6
307-4 B4
307-5 B5
307-6 FOLIO
307-7 LD
307-8 LG
307-9 LT
307-10 ST
307-11 COMP
307-12 13LG
307-13 8.5 x 8.5
307-14 16K
307-15 8K307-16 Others
308-0 Counter Number ofoutput pagesin FAX func-tion
A3 FAX 0
SYS Counts the outputpages in the FAX func-tion for each paper sizeaccording to the settingfor the count setting oflarge-sized paper (08-352) and the definitionsetting of large-sizedpaper (08-353).
4
308-1 A4
308-2 A5
308-3 A6
308-4 B4
308-5 B5
308-6 FOLIO
308-7 LD
308-8 LG
308-9 LT
308-10 ST
308-11 COMP308-12 13LG
308-13 8.5 x 8.5
308-14 16K
308-15 8K
308-16 Others
Setting mode (08)
Code Classifi-
cation Items
Func-
tion
Default
RAM Contents Proce-
dure
05/11
-
8/12/2019 es202l_232_282mode08
15/94
June 2004 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/230/232/280/282ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 167
2
312-0 Counter Number ofscanning
pages incopier func-tion
A3 PPC 0
SYS Counts the scanningpages in the copier
function for each papersize according to thesetting for the countsetting of large-sizedpaper (08-352) and thedefinition setting oflarge-sized paper (08-353).
4
312-1 A4
312-2 A5
312-3 A6
312-4 B4
312-5 B5
312-6 FOLIO
312-7 LD
312-8 LG
312-9 LT
312-10 ST
312-11 COMP
312-12 13LG
312-13 8.5 x 8.5
312-14 16K
312-15 8K312-16 Others
313-0 Counter Number ofscanningpages inscanningfunction
A3 SCN 0
SYS Counts the scanningpages in the scanningfunction for each papersize according to thesetting for the countsetting of large-sizedpaper (08-352) and thedefinition setting oflarge-sized paper (08-353).
4
313-1 A4
313-2 A5
313-3 A6
313-4 B4
313-5 B5
313-6 FOLIO
313-7 LD
313-8 LG
313-9 LT
313-10 ST
313-11 COMP313-12 13LG
313-13 8.5 x 8.5
313-14 16K
313-15 8K
313-16 Others
Setting mode (08)
Code Classifi-
cation Items
Func-
tion
Default
RAM Contents Proce-
dure
05/11
-
8/12/2019 es202l_232_282mode08
16/94
e-STUDIO200L/202L/230/232/280/282 June 2004 TOSHIBA TEC CORPORATION All rights reservedERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 168
314-0 Counter Number ofscanning
pages in FAXfunction
A3 FAX 0
SYS Counts the scanningpages in the FAX func-
tion for each paper sizeaccording to the settingfor the count setting oflarge-sized paper (08-352) and the definitionsetting of large-sizedpaper (08-353).
4
314-1 A4
314-2 A5
314-3 A6
314-4 B4
314-5 B5
314-6 FOLIO
314-7 LD
314-8 LG
314-9 LT
314-10 ST
314-11 COMP
314-12 13LG
314-13 8.5 x 8.5
314-14 16K
314-15 8K314-16 Others
315-0 Counter Number oftransmittedpages in FAXfunction
A3 FAX 0
SYS Counts the transmittedpages in the FAX func-tion for each paper sizeaccording to the settingfor the count setting oflarge-sized paper (08-352) and the definitionsetting of large-sizedpaper (08-353).
4
315-1 A4
315-2 A5
315-3 A6
315-4 B4
315-5 B5
315-6 FOLIO
315-7 LD
315-8 LG
315-9 LT
315-10 ST
315-11 COMP315-12 13LG
315-13 8.5 x 8.5
315-14 16K
315-15 8K
315-16 Others
Setting mode (08)
Code Classifi-
cation Items
Func-
tion
Default
RAM Contents Proce-
dure
05/11
-
8/12/2019 es202l_232_282mode08
17/94
June 2004 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/230/232/280/282ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 169
2
316-0 Counter Number ofreceived
pages in FAXfunction
A3 FAX 0
SYS Counts the receivedpages in the FAX func-
tion for each paper sizeaccording to the settingfor the count setting oflarge-sized paper (08-352) and the definitionsetting of large-sizedpaper (08-353).
4
316-1 A4
316-2 A5
316-3 A6
316-4 B4
316-5 B5
316-6 FOLIO
316-7 LD
316-8 LG
316-9 LT
316-10 ST
316-11 COMP
316-12 13LG
316-13 8.5 x 8.5
316-14 16K
316-15 8K316-16 Others
320-0 Counter Display ofnumber ofoutput pagesin copier func-tion
Large PPC 0
SYS Counts the number ofoutput pages in theCopier Functionaccording to its size(large/small).Large:
Number of outputpages of large-sizedpaper defined at 08-353
Small:Number of outputpages other than
set as large-sizedpaperTotal:
Total number out-put pages of allpaper sizes.
14
320-1 Counter Small PPC 0
SYS 14
320-2 Counter Total PPC 0
SYS 14
321-0 Counter Display ofnumber ofoutput pagesin printer func-tion
Large PRT 0
SYS Counts the number ofoutput pages in thePrinter Functionaccording to its size(large/small).Large:
Number of outputpages of large-sizedpaper defined at 08-353
Small:Number of outputpages other thanset as large-sizedpaper
Total:Total number out-put pages of allpaper sizes.
14
321-1 Counter Small PRT 0
SYS 14
321-2 Counter Total PRT 0
SYS 14
Setting mode (08)
Code Classifi-
cation Items
Func-
tion
Default
RAM Contents Proce-
dure
05/11
-
8/12/2019 es202l_232_282mode08
18/94
e-STUDIO200L/202L/230/232/280/282 June 2004 TOSHIBA TEC CORPORATION All rights reservedERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 170
322-0 Counter Display ofnumber of
output pagesat list printmode
Large PRT 0
SYS Counts the number ofoutput pages at the List
Print Mode Functionaccording to its size(large/small).Large:
Number of outputpages of large-sizedpaper defined at 08-353
Small:Number of outputpages other thanset as large-sizedpaper
Total:Total number out-put pages of all
paper sizes.
14
322-1 Counter Small PRT 0
SYS 14
322-2 Counter Total PRT 0
SYS 14
323-0 Counter Display ofnumber ofoutput pagesin FAX func-tion
Large PRT 0
SYS Counts the number ofoutput pages in the FAXFunction according toits size (large/small).Large:
Number of outputpages of large-sizedpaper defined at 08-353
Small:Number of outputpages other thanset as large-sizedpaper
Total:Total number out-put pages of allpaper sizes.
14
323-1 Counter Small PRT 0
SYS 14
323-2 Counter Total PRT 0
SYS 14
327-0 Counter Display ofnumber ofscanningpages incopier func-tion
Large PPC 0
SYS Counts the number ofscanning pages in theCopier Functionaccording to its size(large/small).Large:
Number of outputpages of large-sizedpaper defined at 08-353
Small:Number of outputpages other thanset as large-sizedpaper
Total:Total number out-put pages of allpaper sizes.
14
327-1 Counter Small PPC 0
SYS 14
327-2 Counter Total PPC 0
SYS 14
Setting mode (08)
Code Classifi-
cation Items
Func-
tion
Default
RAM Contents Proce-
dure
05/11
-
8/12/2019 es202l_232_282mode08
19/94
June 2004 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/230/232/280/282ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 171
2
328-0 Counter Display ofnumber of
scanningpages in FAXfunction
Large FAX 0
SYS Counts the number ofscanning pages in the
FAX Function accordingto its size (large/small).Large:
Number of outputpages of large-sizedpaper defined at 08-353
Small:Number of outputpages other thanset as large-sizedpaper
Total:Total number out-put pages of allpaper sizes.
14
328-1 Counter Small FAX 0
SYS 14
328-2 Counter Total FAX 0
SYS 14
329-0 Counter Display ofnumber ofscanningpages inscanningfunction
Large SCN 0
SYS Counts the number ofscanning pages in theScanning Functionaccording to its size(large/small).Large:
Number of outputpages of large-sizedpaper defined at 08-353
Small:Number of outputpages other thanset as large-sizedpaper
Total:Total number out-put pages of allpaper sizes.
14
329-1 Counter Small SCN 0
SYS 14
329-2 Counter Total SCN 0
SYS 14
330-0 Counter Display ofnumber oftransmittedpages in FAXfunction
Large FAX 0
SYS Counts the number oftransmitted pages in theFAX Function accordingto its size (large/small).Large:
Number of outputpages of large-sizedpaper defined at 08-353
Small:Number of outputpages other thanset as large-sizedpaper
Total:Total number out-put pages of allpaper sizes.
14
330-1 Counter Small FAX 0
SYS 14
330-2 Counter Total FAX 0
SYS 14
Setting mode (08)
Code Classifi-
cation Items
Func-
tion
Default
RAM Contents Proce-
dure
05/11
-
8/12/2019 es202l_232_282mode08
20/94
e-STUDIO200L/202L/230/232/280/282 June 2004 TOSHIBA TEC CORPORATION All rights reservedERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 172
331 Userinterface
Default setting of screen ALL 0
SYS Sets the screen to bedisplayed after the
auto-clear time haspassed or it has recov-ered from the energysaving mode or sleepmode.0: Copier 1: Fax2: Scan 3: Box4: Job Status5: Template
1
332-0 Counter Display ofnumber ofreceivedpages in FAXfunction
Large FAX 0
SYS Counts the number ofreceived pages in theFAX Function accordingto its size (large/small).Large:
Number of outputpages of large-sizedpaper defined at 08-353
Small:Number of outputpages other thanset as large-sizedpaper
Total:Total number out-put pages of allpaper sizes.
14
332-1 Counter Small FAX 0 SYS 14
332-2 Counter Total FAX 0
SYS 14
335-0 Counter Display oftotal numberof pages
Large ALL 0
SYS Displays the total num-ber of pages in thecopier/printer/scanning/FAX functions.
14
335-1 Counter Small ALL 0
SYS 14
335-2 Counter Total ALL 0
SYS 14
337 Paperfeeding
Paper size (#10-R)feeding/widthwise direction
ALL 241/105
M 10
338 Paperfeeding
Paper size (DL-R)feeding/widthwise direction
ALL 220/110
M 10
339 Paperfeeding
Paper size (Envelope:Monarch-R)feeding/widthwise direction
ALL 191/98
M 10
340 Paper
feeding
Paper size (Envelope:
CHO-3-R)feeding/widthwise direction
ALL 235/120
M 10
341 Paperfeeding
Paper size (Envelope:YOU-4-R)feeding/widthwise direction
ALL 235/105
M 10
Setting mode (08)
Code Classifi-
cation Items
Func-
tion
Default
RAM Contents Proce-
dure
07/04
-
8/12/2019 es202l_232_282mode08
21/94
June 2004 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/230/232/280/282ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 173
2
342 Userinterface
Displaying number of origi-nal pages placed on origi-
nal glass
PPC 0
SYS This setting is whetherthe number of pages of
originals placed on theoriginal glass is dis-played or not.0: Not displayed1: Displayed
1
345 Counter Count setting of envelope(PM)
ALL 1
M 0: Counted as 11: Counted as 2
1
346 Counter Count setting of large-sized paper (PM)
ALL 1
M 0: Counted as 11: Counted as 2
1
347 Counter Definition setting of large-sized paper (PM)
ALL 1
M 0: A3/LD1: A3/LD/B4/LG/
FOLIO/COMP
1
348 Counter Count setting of thick paper(PM)
ALL 1
M 0: Counted as 11: Counted as 2
1
349 Counter Count setting of OHP fi lm
(PM)
ALL 1
M 0: Counted as 1
1: Counted as 2
1
352 Counter Count setting of large-sized paper(Fee charging systemcounter)
ALL JPN: 0OTHER:
1
M 0: Counted as 11: Counted as 22: Counted as 1
(Mechanical counteris double counter)
1
353 Counter Definition setting of large-sized paper(Fee charging systemcounter)
ALL 0
M 0: A3/LD1: A3/LD/B4/LG/
FOLIO/COMP/8K
1
356 Counter Counter for upper drawerfeeding
ALL 0
M Counts the number ofsheets fed from upperdrawer
2
357 Counter Counter for lower drawerfeeding
ALL 0
M Counts the number ofsheets fed from lower
drawer
2
358 Counter Counter for bypass feeding ALL 0
M Counts the number ofsheets fed from bypassfeed
2
359 Counter Counter for LCF feeding ALL 0
M Counts the number ofsheets fed from LCF
2
360 Counter Counter for PFP upperdrawer feeding
ALL 0
M Counts the number ofsheets fed from PFPupper drawer
2
370 Counter Counter for PFP lowerdrawer feeding
ALL 0
M Counts the number ofsheets fed from PFPlower drawer
2
372 Counter Counter for ADU ALL 0
M Counts the number ofoutput pages of duplexprinting.
2
374 Counter Counter for RADF ALL 0
SYS Counts the number oforiginals fed from RADF
2
Setting mode (08)
Code Classifi-
cation Items
Func-
tion
Default
RAM Contents Proce-
dure
05/11
-
8/12/2019 es202l_232_282mode08
22/94
e-STUDIO200L/202L/230/232/280/282 June 2004 TOSHIBA TEC CORPORATION All rights reservedERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 174
381 Counter Setting for counter installedexternally
ALL 1
M Selects the job to countup for the external
counter.0: Not selected1: Copier 2: FAX3: Copier/FAX4: Printer5: Copier/Printer6: Printer/FAX7: Copier/Printer/FAX
1
390 Counter Number of errors in HDD(Copier)
PPC 0
SYS The number of error isreset at HDD format-ting.
2
391 Counter Number of errors in HDD(FAX)
FAX 0
SYS The number of error isreset at HDD format-ting.
2
392 Counter Number of errors in HDD
(Scanning)
SCN 0
SYS The number of error is
reset at HDD format-ting.
2
393 Counter Number of errors in HDD(Printer)
PRT 0
SYS The number of error isreset at HDD format-ting.
2
398 Laser Number of polygonal motorrotational speed switching
ALL 0
M Counts the number oftime the polygonalmotor has switched itsrotational speedbetween normal rota-tion and standby rota-tion.
2
399 Laser Accumulated time of polyg-onal motor at normal rota-tion
ALL 0
M Accumulates the timethe polygonal motor hasrotated at normal rota-tion.
2
400 Fuser Fuser unit error statuscounter
ALL 0
M 0: No error 1: C410 (Once)2: C410 (consecutively
occurred)3: - 4: C4305: C440 6: C4507: C440 8: C4509: C440 10:C47011: C470 12: C48013:C490 14: C47015:C480 16: C49017:C470 18: C48019:C490
1
Setting mode (08)
Code Classifi-
cation Items
Func-
tion
Default
RAM Contents Proce-
dure
07/04
-
8/12/2019 es202l_232_282mode08
23/94
June 2004 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/230/232/280/282ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 175
2
404-0 Fuser Temperaturedrop setting in
ready status(Center ther-mistor)
The firstdrop
ALL 1
M This code is valid onlywhen 20 is set to 08-
886.Setting value x -5C:from 0C to -50C
4
404-1 The sec-ond drop
ALL 1
M 4
404-2 The thirddrop
ALL 1
M 4
404-3 The fourthdrop
ALL 1
M 4
405-0 Fuser Temperaturedrop setting inready status(Side ther-mistor)
The firstdrop
ALL 4
M 4
405-1 The sec-ond drop
ALL 4
M 4
405-2 The thirddrop
ALL 4
M 4
405-3 The fourthdrop
ALL 4
M 4
407 Fuser Fuser roller temperature inready status(Side thermistor)
ALL 8
M 0: 140C 1: 145C2: 150C 3: 155C4: 160C 5: 165C6: 170C 7: 175C8: 180C 9: 185C10: 190C11: 195C12: 200C
1
409 Fuser Fuser roller temperature atenergy saver mode(Center thermistor)
ALL 0
M 0: OFF 1: 40C2: 50C 3: 60C4: 70C 5: 80C6: 90C 7: 100C8: 110C 9: 120C10: 130C11: 140C12: 150C
13: 160C
1
410 Fuser Fuser roller temperatureduring printing(Center thermistor/Plainpaper)
ALL 8
M 0: 140C 1: 145C2: 150C 3: 155C4: 160C 5: 165C6: 170C 7: 175C8: 180C 9: 185C10: 190C11: 195C12: 200C13: 205C14: 210C
1
411 Fuser Fuser roller temperature onstandby(Center thermistor)
ALL 8
M 0: 140C 1: 145C2: 150C 3: 155C4: 160C 5: 165C6: 170C 7: 175C8: 180C 9: 185C
10: 190C11: 195C12: 200C
1
Setting mode (08)
Code Classifi-
cation Items
Func-
tion
Default
RAM Contents Proce-
dure
05/11
-
8/12/2019 es202l_232_282mode08
24/94
e-STUDIO200L/202L/230/232/280/282 June 2004 TOSHIBA TEC CORPORATION All rights reservedERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 176
412 Fuser Fuser roller temperatureduring printing
(Center thermistor/Thickpaper 3)
ALL 9
M 0: 140C 1: 145C2: 150C 3: 155C
4: 160C 5: 165C6: 170C 7: 175C8: 180C 9: 185C10: 190C11: 195C12: 200C13: 205C14: 210C
1
413 Fuser Fuser roller temperatureduring printing(Center thermistor/Thickpaper 1)
ALL 8
M 0: 140C 1: 145C2: 150C 3: 155C4: 160C 5: 165C6: 170C 7: 175C8: 180C 9: 185C10: 190C11: 195C12: 200C13: 205C14: 210C
1
414 Devel-oper
Toner density life correc-tion switching
ALL 0
M 0: Unchanged (Default)1: Approx. 0.3 wt%
higher2: Approx. 0.6 wt%
higher3: Approx. 0.9 wt%
higher4: Approx. 0.2 wt%
lower5: Approx. 0.4 wt%
lower6: Approx. 0.6 wt%
lower
7: Approx. 0.9 wt%lower
1
417 Fuser Pre-running time for firstprinting(Thick paper 3)
ALL 10
M 0: Invalid 1: 1 sec.2: 2 sec. 3: 3 sec.4: 4 sec. 5: 5 sec.6: 6 sec. 7: 7 sec.8: 8 sec. 9: 9 sec.10: 10 sec.11: 12 sec.12: 14 sec.13: 16 sec.14: 18 sec.15: 20 sec.
1
Setting mode (08)
Code Classifi-
cation Items
Func-
tion
Default
RAM Contents Proce-
dure
05/11
-
8/12/2019 es202l_232_282mode08
25/94
June 2004 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/230/232/280/282ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 177
2
424-0 Fuser Temperaturedrop switching
time setting inready status(Center ther-mistor)
The firstdrop
ALL 15
M This code is valid onlywhen 20 is set to 08-
886.Setting value x 1 min.:from 2 to 60 min. later
4
424-1 The sec-ond drop
ALL 15
M 4
424-2 The thirddrop
ALL 15
M 4
424-3 The fourthdrop
ALL 15
M 4
425-0 Fuser Temperaturedrop switchingtime setting inready status(Side ther-mistor)
The firstdrop
ALL 15
M 4
425-1 The sec-ond drop
ALL 15
M 4
425-2 The thirddrop
ALL 15
M 4
425-3 The fourthdrop
ALL 15
M 4
433-0 Fuser Temperaturecontrol lowerlimit(Plain paper/at ordinarytemperature)
Centerthermistor
ALL 7
M 0: 130C 1: 135C2: 140C 3: 145C4: 150C 5: 155C6: 160C 7: 165C8: 170C 9: 175C10: 180C11: 185C12: 120C
4
433-1 Side ther-mistor
ALL 5
M 4
437 Fuser Fuser roller temperatureduring printing(Center thermistor /Thickpaper 2)
ALL 8
M 0: 140C 1: 145C2: 150C 3: 155C4: 160C 5: 165C6: 170C 7: 175C8: 180C 9: 185C10: 190C11: 195C12: 200C
13: 205C14: 210C
1
438 Fuser Fuser roller temperatureduring printing(Center thermistor/OHPfilm)
ALL 8
M 0: 140C 1: 145C2: 150C 3: 155C4: 160C 5: 165C6: 170C 7: 175C8: 180C 9: 185C10: 190C11: 195C12: 200C13: 205C14: 210C
1
439 Fuser Pre-running time for firstprinting(Thick paper 2)
ALL 10
M 0: Invalid 1: 1 sec.2: 2 sec. 3: 3 sec.4: 4 sec. 5: 5 sec.6: 6 sec. 7: 7 sec.
8: 8 sec. 9: 9 sec.10: 10 sec.11: 12 sec.12: 14 sec.13: 16 sec.14: 18 sec.15: 20 sec.
1
Setting mode (08)
Code Classifi-
cation Items
Func-
tion
Default
RAM Contents Proce-
dure
05/11
-
8/12/2019 es202l_232_282mode08
26/94
e-STUDIO200L/202L/230/232/280/282 June 2004 TOSHIBA TEC CORPORATION All rights reservedERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 178
440 Fuser Pre-running time for firstprinting
(Plain paper)
ALL 0
M 0: Invalid 1: 1 sec.2: 2 sec. 3: 3 sec.
4: 4 sec. 5: 5 sec.6: 6 sec. 7: 7 sec.8: 8 sec. 9: 9 sec.10: 10 sec.11: 12 sec.12: 14 sec.13: 16 sec.14: 18 sec.15: 20 sec.
1
441 Fuser Pre-running time for firstprinting(Thick paper 1)
ALL 0
M 0: Invalid 1: 1 sec.2: 2 sec. 3: 3 sec.4: 4 sec. 5: 5 sec.6: 6 sec. 7: 7 sec.8: 8 sec. 9: 9 sec.10: 10 sec.11: 12 sec.12: 14 sec.13: 16 sec.14: 18 sec.15: 20 sec.
1
448 Fuser Fuser roller temperature inEnergy Saving Mode(Side thermistor)
ALL 0
M 0: OFF 1: 40C2: 50C 3: 60C4: 70C 5: 80C6: 90C 7: 100C8: 110C 9: 120C10: 130C11: 140C12: 150C13: 160C
1
449 Paperfeeding
Incorrect paper size jamdetection switching
ALL 0
M 0: Enabled1: Disabled
1
450 Fuser Fuser roller temperatureduring printing(Side thermistor/Plainpaper)
ALL 8
M 0: 140C 1: 145C2: 150C 3: 155C4: 160C 5: 165C6: 170C 7: 175C8: 180C 9: 185C10: 190C11: 195C12: 200C13: 205C14: 210C
1
451 Fuser Fuser roller temperatureduring printing(Side thermistor/Thickpaper 1)
ALL 8
M 0: 140C 1: 145C2: 150C 3: 155C4: 160C 5: 165C6: 170C 7: 175C8: 180C 9: 185C10: 190C
11: 195C12: 200C13: 205C14: 210C
1
Setting mode (08)
Code Classifi-
cation Items
Func-
tion
Default
RAM Contents Proce-
dure
05/11
-
8/12/2019 es202l_232_282mode08
27/94
June 2004 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/230/232/280/282ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 179
2
452 Fuser Fuser roller temperatureduring printing
(Side thermistor/Thickpaper 2)
ALL 8
M 0: 140C 1: 145C2: 150C 3: 155C
4: 160C 5: 165C6: 170C 7: 175C8: 180C 9: 185C10: 190C11: 195C12: 200C13: 205C14: 210C
1
453 Fuser Fuser roller temperatureduring printing(Side thermistor/OHP film)
ALL 8
M 0: 140C 1: 145C2: 150C 3: 155C4: 160C 5: 165C6: 170C 7: 175C8: 180C 9: 185C10: 190C11: 195C12: 200C13: 205C14: 210C
1
455 Imageprocess-
ing
Toner supply amount cor-rection/Toner motor control
ALL 0
M Corrects the supplyamount of the freshtoner (driving period ofthe toner motor) into thedeveloper unit.0: x1.0 1: x0.752: x0.5 3: x0.34: x2.0 5: x1.5
1
Setting mode (08)
Code Classifi-
cation Items
Func-
tion
Default
RAM Contents Proce-
dure
05/11
-
8/12/2019 es202l_232_282mode08
28/94
e-STUDIO200L/202L/230/232/280/282 June 2004 TOSHIBA TEC CORPORATION All rights reservedERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 180
462 RADF Setting for switchbackoperation in mixed-size
copying using RADF
ALL 0
M This setting is whetherthe original length is
detected or not bytransporting withoutscanning in reversewhen A4-R/FOLIOpaper or LT-R/LG paperis detected in a mixed-size copying.0: Disabled -AMS:
A series - Judges asA4-R without trans-porting in reversewith no scanning.LT series - Judgeswhether it is LT-R orLG by its length
without transportingin reverse with noscanning.
APS:A series - Judgeswhether it is A4-R orFOLIO withouttransporting inreverse with noscanning.LT series - Judgeswhether it is LT-R orLG without trans-porting in reversewith no scanning.
1: Enable 1
AMS:A series - Judgeswhether it is A4-R orFOLIO by transport-ing without scanningin reverse to detectits length.LT series - Judgeswhether it is LT-R orLG by transportingwithout scanning inreverse to detect itslength.
APS:The same as that of
APS in 0: Disabled.
2: Enable 2AMS/APS:
The same as that ofAMS in 1: Enable 1.
1
463-0 Paperfeeding
Feeding retrynumber set-ting(upperdrawer)
Plainpaper
ALL 5
M Sets the number oftimes of the feedingretry from the upperdrawer.
4
463-1 Others ALL 5
M 4
Setting mode (08)
Code Classifi-
cation Items
Func-
tion
Default
RAM Contents Proce-
dure
05/11
-
8/12/2019 es202l_232_282mode08
29/94
June 2004 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/230/232/280/282ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 181
2
464-0 Paperfeeding
Feeding retrynumber set-
ting (lowerdrawer)
Plainpaper
ALL 5
M Sets the number oftimes of the feeding
retry from the lowerdrawer.
4
464-1 Others ALL 5
M 4
465-0 Paperfeeding
Feeding retrynumber set-ting(PFP upperdrawer)
Plainpaper
ALL 5
M Sets the number oftimes of the feedingretry from the PFPupper drawer.
4
465-1 Others ALL 5
M 4
466-0 Paperfeeding
Feeding retrynumber set-ting(PFP lowerdrawer)
Plainpaper
ALL 5
M Sets the number oftimes of the feedingretry from the PFPlower drawer.
4
466-1 Others ALL 5
M 4
467-0 Paperfeeding
Feeding retrynumber set-ting
(bypass feed)
Plainpaper
ALL 5
M Sets the number oftimes of the feedingretry from the bypass
tray.
4
467-1 Others ALL 5
M 4
468-0 Paperfeeding
Feeding retrynumber set-ting(LCF)
Plainpaper
ALL 5
M Sets the number oftimes of the feedingretry from the LCF.
4
468-1 Others ALL 5
M 4
471 Paperfeeding
Paper size (Postcard)feeding/widthwise direction
ALL 148/100
M * Postcard is sup-ported only for JPNmodel.
10
477 General Machine identificationinformation
ALL Refer tocontent
M Lower drawer model: 0Upper drawer model: 1
2
478 Laser Judged number of polygo-nal motor rotation error(Normal rotation)
ALL 0
M Displays the error[CA10] when the setnumber of rotation error
has been detected.0: 2 times 1: 12 times
1
479 Laser Judged number of polygo-nal motor rotation error(At acceleration/decelera-tion)
ALL 0
M 0: Waiting time forpolygonal motorrotation overshoot-ing 0.6 sec.
1: Waiting time forpolygonal motorrotation overshoot-ing 2.2 sec.
1
480 Paperfeeding
Default setting of papersource
PPC 0
SYS 0: A4/LT 1: LCF2: Upper drawer3: Lower drawer4: PFP upper drawer5: PFP lower drawer
1
Setting mode (08)
Code Classifi-
cation Items
Func-
tion
Default
RAM Contents Proce-
dure
05/11
-
8/12/2019 es202l_232_282mode08
30/94
e-STUDIO200L/202L/230/232/280/282 June 2004 TOSHIBA TEC CORPORATION All rights reservedERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 182
481 Paperfeeding
Automatic change of papersource
PPC 1
SYS Sets whether or notchanging the drawer
automatically to theother drawer with thepaper of the same sizewhen paper in theselected drawer has runout.0: OFF1: ON (Changes to the
drawer with thesame paper direc-tion and size: ex. A4to A4)
2: ON (Changes to thedrawer with thesame paper size.Paper with the dif-
ferent direction isacceptable as longas the size is thesame: ex., A4 to A4-R, LT-R to LT. 1 isapplied when thestaple/hole-punch isspecified.)
1
482 Paperfeeding
Feeding retry setting ALL 0
M 0: ON1: OFF
1
483 Laser Pre-running rotation ofpolygonal motor
ALL 0
SYS Sets whether or notswitching the polygonalmotor from the standbyrotation to the normalrotation when the origi-
nal is set on the RADFor the platen cover isopened.0: Valid (when using
RADF and the origi-nal is set manually)
1: Invalid2: Valid (when using
RADF only)
1
484 Laser Polygonal motor rotationalstatus switching at the AutoClear Mode
ALL 0
SYS Sets whether or notswitching the polygonalmotor from the normalrotation to the standbyrotation at the AutoClear Mode.0: Valid 1: Invalid
1
485 Laser Rotational status of polygo-nal motor on standby
ALL 1
SYS Sets the rotational sta-tus of polygonal motoron standby.0: Rotated (The rota-
tional speed is set at08-490.)
1: Stopped
1
Setting mode (08)
Code Classifi-
cation Items
Func-
tion
Default
RAM Contents Proce-
dure
05/11
-
8/12/2019 es202l_232_282mode08
31/94
June 2004 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/230/232/280/282ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 183
2
486 Laser Timing of auto-clearing ofpolygonal motor pre-run-
ning rotation
ALL 0
SYS Switches the polygonalmotor to the standby
rotation when a certainperiod of time haspassed from the pre-running. At this code,the period to switch thestatus to the standbyrotation is set.0: 15 sec.1: 30 sec.2: 45 sec.* This setting is effec-
tive when 0 or 2is set at 08-483.
1
488 Laser Setting of polygonal motortype
ALL 0
M Set the type of polygo-nal motor.0: 2-clock type1: 3-clock type2: 4-clock type3: 4-clock type
1
489 Laser Polygonal motor rotationnumber on standby
ALL 5
M 0: 38,090.55 rpm1: 35,000 rpm2: 30,000 rpm3: 25,000 rpm4: 20,000 rpm5: 10,000 rpm
1
490 Laser Polygonal motor rotation inthe energy saving mode
ALL 0
M 0: Stopped1: 10,000 rpm
1
491 Transfer Transfer charger bias cor-rection (H) at duplexing
ALL 149
M Corrects the transfercharger bias outputvalue of the leadingedge area of paper atduplexing.
1
492 Transfer Transfer charger bias cor-rection (C) at duplexing
ALL 139
M Corrects the transfercharger bias outputvalue of the center areaof paper at duplexing.
1
493 Transfer Transfer charger bias cor-rection (L) at duplexing
ALL 128
M Corrects the transfercharger bias outputvalue of the trailingedge area of paper atduplexing.
1
502 Image Error diffusion and dithersetting at photo mode
PPC 1
SYS Sets the image repro-duction method atphoto mode.0: Error diffusion1: Dither
1
503 User
interface
Default setting of density
adjustment
PPC 0
SYS 0: Automatic
1: Manual (Center)
1
Setting mode (08)
Code Classifi-
cation Items
Func-
tion
Default
RAM Contents Proce-
dure
05/11
-
8/12/2019 es202l_232_282mode08
32/94
e-STUDIO200L/202L/230/232/280/282 June 2004 TOSHIBA TEC CORPORATION All rights reservedERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 184
508 Image Custom Mode setting PPC 0
SYS 0: Not used1: Custom Mode 1
when Text/Photo isset as a base
2: Custom Mode 2when Text is set asa base
3: Custom Mode 3when Photo is setas a base
1
509 Image Error diffusion and dithersetting at a photo mode(Custom Mode)
PPC 1
SYS Switches the imageprocessing methodwhen Custom Mode 3is set.0: Error diffusion1: Dither
1
515 Fuser Temperature setting of
warming-up(Center thermistor)
ALL 9
M 0: 140C 1: 145C
2: 150C 3: 155C4: 160C 5: 165C6: 170C 7: 175C8: 180C 9: 185C10: 190C11: 195C12: 200C13: 205C14: 210C
1
516 Fuser Temperature setting ofwarming-up(Side thermistor)
ALL 9
M 0: 140C 1: 145C2: 150C 3: 155C4: 160C 5: 165C6: 170C 7: 175C8: 180C 9: 185C10: 190C11: 195C
12: 200C13: 205C14: 210C
1
518 Fuser Fuser roller temperatureduring printing(Side thermistor/Thickpaper 3)
ALL 9
M 0: 140C 1: 145C2: 150C 3: 155C4: 160C 5: 165C6: 170C 7: 175C8: 180C 9: 185C10: 190C11: 195C12: 200C13: 205C14: 210C
1
520 Fuser Fuser roller temperatureduring printing(Center thermistor/Enve-
lope)
ALL 9
M 0: 140C 1: 145C2: 150C 3: 155C4: 160C 5: 165C
6: 170C 7: 175C8: 180C 9: 185C10: 190C11: 195C12: 200C13: 205C14: 210C
1
Setting mode (08)
Code Classifi-
cation Items
Func-
tion
Default
RAM Contents Proce-
dure
05/11
-
8/12/2019 es202l_232_282mode08
33/94
June 2004 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/230/232/280/282ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 185
2
521 Fuser Fuser roller temperatureduring printing
(Side thermistor/Envelope)
ALL 9
M 0: 140C 1: 145C2: 150C 3: 155C
4: 160C 5: 165C6: 170C 7: 175C8: 180C 9: 185C10: 190C11: 195C12: 200C13: 205C14: 210C
1
523 Fuser Pre-running time for firstprinting(Envelope)
ALL 10
M 0: Invalid 1: 1 sec.2: 2 sec. 3: 3 sec.4: 4 sec. 5: 5 sec.6: 6 sec. 7: 7 sec.8: 8 sec. 9: 9 sec.10: 10 sec.11: 12 sec.12: 14 sec.13: 16 sec.14: 18 sec.15: 20 sec.
1
525-0 Fuser Temperaturedrop switchingtime settingduring printing(Center ther-mistor)
The firstdrop
ALL 20
M This code is valid onlywhen 20 is set to 08-535.Setting value x 5 sec.:from 0 to 1,000 sec.later
4
525-1 The sec-ond drop
ALL 38
M 4
525-2 The thirddrop
ALL 75
M 4
525-3 The fourthdrop
ALL 75
M 4
526 Fuser Pre-running time for firstprinting (OHP film)
ALL 0
M 0: Invalid 1: 0 sec.2: 2 sec. 3: 3 sec.4: 4 sec. 5: 5 sec.6: 6 sec. 7: 7 sec.8: 8 sec. 9: 9 sec.10: 10 sec.11: 12 sec.12: 14 sec.13: 16 sec.14: 18 sec.15: 20 sec.
1
527-0 Fuser Temperaturedrop switchingtime settingduring printing(Side ther-mistor)
The firstdrop
ALL 20
M This code is valid onlywhen 20 is set to 08-535.Setting value x 5 sec.:from 0 to 1,000 sec.later
4
527-1 The sec-ond drop
ALL 30
M 4
527-2 The thirddrop
ALL 48
M 4
527-3 The fourthdrop
ALL 75
M 4
Setting mode (08)
Code Classifi-
cation Items
Func-
tion
Default
RAM Contents Proce-
dure
05/11
-
8/12/2019 es202l_232_282mode08
34/94
e-STUDIO200L/202L/230/232/280/282 June 2004 TOSHIBA TEC CORPORATION All rights reservedERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 186
535 Fuser Temperature drop controlsetting during printing
(Temperature/Time)
ALL 2
M 0: None1: Pattern 1
2: Pattern 23: Pattern 34: Pattern 45: Pattern 56: Pattern 67: Pattern 78: Pattern 89: Pattern 910: Pattern 1011: Pattern 1112: Pattern 1213: Pattern 1314: Pattern 1415: Pattern 1516: Pattern 1617: Pattern 17
18: Pattern 1819: Pattern 1920: Manual adjustment
1
536-0 Fuser Temperaturedrop settingduring printing(Center ther-mistor)
The firstdrop
ALL 1
M This code is valid onlywhen 20 is set to 08-535.Setting value x -5C:from 0C to -50C
4
536-1 The sec-ond drop
ALL 2
M 4
536-2 The thirddrop
ALL 3
M 4
536-3 The fourthdrop
ALL 3
M 4
537-0 Fuser Temperaturedrop settingduring printing(Side ther-
mistor)
The firstdrop
ALL 1
M 4
537-1 The sec-ond drop
ALL 2
M 4
537-2 The thirddrop
ALL 3
M 4
537-3 The fourthdrop
ALL 5
M 4
550 Image Default setting of originalmode
PPC 0
SYS 0: Text/Photo1: Photo 2: Text3: Custom Mode
1
601 Userinterface
Setting for the Energy Sav-ing Mode
ALL 0
SYS 0: Auto Shut Off Mode1: Sleep Mode
1
602 Userinterface
Screen setting for Autopower Save Mode and
Auto Shut OFF Mode
ALL EUR: 0UC: 1JPN: 1
SYS 0: OFF 1: ON 1
603 Userinterface
Setting for automaticduplexing mode
PPC 0
SYS 0: Invalid1: Single-sided to
duplex copying2: Double-sided to
duplex copying3: User selection
1
Setting mode (08)
Code Classifi-
cation Items
Func-
tion
Default
RAM Contents Proce-
dure
06/01
-
8/12/2019 es202l_232_282mode08
35/94
June 2004 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/230/232/280/282ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 187
2
604 Userinterface
Default setting for APS/AMS
PPC 0
SYS 0: APS (AutomaticPaper Selection)
1: AMS (AutomaticMagnification Selec-tion)
2: Not selected
1
605 Userinterface
Centering printing of pri-mary/secondary directionat AMS
PPC 1
SYS 0: Invalid 1: Valid 1
607 Userinterface
Default setting of RADFmode
PPC 0
SYS 0: Continuous feeding(by pressing the[START] button)
1: Single feeding(by setting originalon the tray)
1
610 Userinterface
Key touch sound of controlpanel
ALL 1
SYS 0: OFF1: ON
1
611 Userinterface
Book type original priority PPC 0
SYS 0: Left page to rightpage
1: Right page to leftpage
1
612 General Summer time mode ALL 0
SYS 0: Not summer time1: Summer time
1
613 Userinterface
Paper size selection for[OTHER] button
PPC EUR:FOLIO
UC:COMP
JPN:A5-R
SYS Press the button on theLCD to select the size.
9
614 Network Local I/F time-out period PRT 6
SYS Sets the period of timewhen the job is judgedas completed in local I/
F printing (USB or par-allel).1: 1.0 sec.2: 1.5 sec.-50: 25.5 sec.(in increments of 0.5sec.)
1
615 General Size information of mainmemory and page memory
ALL - SYS Displays the sizes ofthe main memory andpage memory. Enablesto check if each mem-ory is properly recog-nized.
2
617 Userinterface
Print setting withoutdepartment code
ALL 1
SYS 0: Printed1: Not printed (pooled
in the invalid queue)
2: Deleted forcibly
1
618 Userinterface
Default setting when mixedsize originals are set onRADF
PPC 0
SYS 0: Scanned as all insame size
1: Scanned as eachoriginal size
1
Setting mode (08)
Code Classifi-
cation Items
Func-
tion
Default
RAM Contents Proce-
dure
05/11
-
8/12/2019 es202l_232_282mode08
36/94
e-STUDIO200L/202L/230/232/280/282 June 2004 TOSHIBA TEC CORPORATION All rights reservedERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 188
619 Paperfeeding
Time lag before Auto JobStart of bypass feeding
ALL 4
SYS Sets the time taken toadd paper feeding
when paper in thebypass tray has run outduring the bypass feedcopying.0: Paper is not drawn
in unless the[START] button ispressed.
1-10: Setting value x0.5 sec.
1
620 Userinterface
Department managementsetting (Copier)
PPC 1
SYS 0: Invalid1: Valid
1
621 Userinterface
Department managementsetting (FAX)
FAX 1
SYS 0: Invalid1: Valid
1
622 User
interface
Department management
setting (Printer)
PRT 1
SYS 0: Invalid
1: Valid
1
623 Userinterface
Department managementsetting (Scanner)
SCN 1
SYS 0: Invalid1: Valid
1
624 Userinterface
Department managementsetting (List print)
PRT 1
SYS 0: Invalid1: Valid
1
625 Userinterface
Blank copying preventionmode during RADF jam-ming
PPC 0
SYS 0: OFF1: ON (Start printing
when the scanningof each page is fin-ished)
1
627 Userinterface
Rotation printing at thenon-sorting
ALL 0
SYS 0: Not rotating1: Rotating
1
628 Userinterface
Direction priority of originalimage
PPC 0
SYS 0: Automatic1: Portrait
1
629 User
interface
Department management
setting
ALL 0
SYS 0: Invalid
1: Valid
1
633 Dataoverwrite
kit
Releasing F200 servicecall
ALL 0
SYS 0: Not used1: Board installed
(GP-1060)2: Service call
1
634 Userinterface
Inner receiving tray priorityat Non-sort Mode
ALL 0
SYS 0: Normal1: Inner receiving tray
1
636 Userinterface
Width setting for imageshift copying (linkage offront side and back side)
PPC 0
SYS 0: ON1: OFF
1
Setting mode (08)
Code Classifi-
cation Items
Func-
tion
Default
RAM Contents Proce-
dure
05/11
-
8/12/2019 es202l_232_282mode08
37/94
June 2004 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/230/232/280/282ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 189
2
638 General Time differences ALL EUR: 24UC: 40
JPN: 6
SYS 0: +12.0h 1: +11.5h2: +11.0h 3: +10.5h
4: +10.0h 5: +9.5h6: +9.0h 7: +8.5h8: +8.0h 9: +7.5h10: +7.0h 11: +6.5h12: +6.0h 13: +5.5h14: +5.0h 15: +4.5h16: +4.0h 17: +3.5h18: +3.0h 19: +2.5h20: +2.0h 21: +1.5h22: +1.0h 23: +0.5h24: 0.0h 25: -0.5h26: -1.0h 27: -1.5h28: -2.0h 29: -2.5h30: -3.0h 31: -3.5h32: -4.0h 33: -4.5h34: -5.0h 35: -5.5h
36: -6.0h 37: -6.5h38: -7.0h 39: -7.5h40: -8.0h 41: -8.5h42: -9.0h 43: -9.5h44: -10.0h45: -10.5h46: -11.0h47: -11.5h
1
640 Userinterface
Date display format ALL EUR: 1UC: 2JPN: 0
SYS 0: YYYY.MM.DD.1: DD.MM.YYYY2: MM.DD.YYYY
1
641 Userinterface
Automatic Sorting Modesetting (RADF)
PPC 2
SYS 0: Invalid 1: STAPLE2: SORT 3: GROUP4: ROTATE SORT
1
642 Userinterface Default setting of SorterMode PPC 0 SYS 0: NON-SORT1: STAPLE2: SORT 3: GROUP4: ROTATE SORT
1
645 Userinterface
Correction of reproductionratio in editing copy
PPC 10
SYS Sets the reproductionratio for the X in 1printing (including mag-azine sort) to theReproduction ratio xCorrection ratio.0: 90% 1: 91%2: 92% 3: 93%4: 94% 5: 95%6: 96% 7: 97%8: 98% 9: 99%10: 100%
1
Setting mode (08)
Code Classifi-
cation Items
Func-
tion
Default
RAM Contents Proce-
dure
05/11
-
8/12/2019 es202l_232_282mode08
38/94
e-STUDIO200L/202L/230/232/280/282 June 2004 TOSHIBA TEC CORPORATION All rights reservedERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 190
646 Userinterface
Image position in editing PPC 2
SYS Sets the page pastedposition for X in 1 to
the upper left corner/center.0: PPC:Cornering/
PRT:Cornering1: PPC:Centering/
PRT:Cornering2: PPC:Cornering/
PRT:Centering3: PPC:Centering/
PRT:Centering
1
648 Userinterface
Returning finisher traywhen printing is finished
ALL 0
SYS Sets whether or notreturning the finishertray to the bin 1 whenprinting is finished.0: Not returned1: Returned
1
649 Userinterface
Magazine sort setting PPC 0
SYS 0: Left page to rightpage
1: Right page to leftpage
1
650 Userinterface
2 in 1/4 in 1 page allocatingorder setting
PPC 0
SYS 0: Horizontal1: Vertical
1
651 Userinterface
Printing format setting forTime stamp and PageNumber
PPC 2
SYS Hyphen(with page number)/Dropout(with date, time andpage number)0: OFF/OFF1: ON/OFF2: OFF/ON3: ON/ON
Note:Note:Hyphen printingformatON: -1- OFF: 1
1
652 Userinterface
Cascade operation setting PPC 0
SYS 0: OFF 1: ON 1
653 Userinterface
Cascade operation setting PRT 0
SYS 0: OFF 1: ON 1
657 Userinterface
Direction priority for dateand time stamp printing
PPC 0
SYS 0: Short edge1: Long edge
1
658 Userinterface
Auto Job Start setting forbypass feed printing
PRT 0
SYS Sets whether or notfeeding a paper auto-matically into the equip-ment when it is placedon the bypass tray.
0: OFF (Press the[START] button tostart feeding.)
1: ON (Automaticfeeding)
1
Setting mode (08)
Code Classifi-
cation Items
Func-
tion
Default
RAM Contents Proce-
dure
07/04
-
8/12/2019 es202l_232_282mode08
39/94
June 2004 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/230/232/280/282ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 191
2
659 Userinterface
Auto Job start setting forbypass feed printing
PPC 1
SYS Sets whether or notfeeding a paper auto-
matically into the equip-ment when it is placedon the bypass tray.0: OFF (Press the
[START] button tostart feeding.)
1: ON (Automaticfeeding)
1
660 Network Auto-forwarding setting ofreceived FAX
ALL 0
SYS 0: Invalid1: Valid
1
661 Network Auto-forwarding setting ofreceived E-mail
ALL 0
SYS 0: Invalid1: Valid
1
662 General Clearing of SMS partition ALL - SYS Clears SMS partition.(Performs when theservice call [F106] has
occurred.)
3
666 General /SHR partition clearing ALL - SYS Initializes the Elec-tronic Filing.
3
667 General /SHA partition clearing ALL - SYS Initializes the sharedfolder.
3
670 General HDD diagnostic menu dis-play
ALL - SYS Display the HDD infor-mation
2
671 Userinterface
Size indicator ALL 0
SYS 0: Invalid1: Valid
1
672 General Initialization of departmentmanagement information
- - SYS Initializing of the depart-ment managementinformation* Key in the code and
press the [INITIAL-IZE] button to per-
form theinitialization. If thearea storing thedepartment man-agement informa-tion is destroyed forsome reason, EnterDepartment Codeis displayed on thecontrol panel even ifthe departmentmanagement func-tion is not set on. Inthis case, initializethe area with thiscode. This area is
normally initializedat the factory.
3
673 General Trial period setting PRT/SCN
254
SYS Sets the trial periodfrom 1 to 60 days. Thissetting is effective onlywhen the default valueis 254. Once thedefault value is set, thisvalue is only used for areference.
1
Setting mode (08)
Code Classifi-
cation Items
Func-
tion
Default
RAM Contents Proce-
dure
05/11
-
8/12/2019 es202l_232_282mode08
40/94
e-STUDIO200L/202L/230/232/280/282 June 2004 TOSHIBA TEC CORPORATION All rights reservedERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 192
678 General Setting of banner advertis-ing display
ALL 0
SYS Sets whether or not dis-playing the banner
advertising. The settingcontents of 08-679 and08-680 are displayed atthe time display sectionon the right top of thescreen. When both areset, each content is dis-played alternately.0: Not displayed1: Displayed
1
679 General Banner advertising display1
ALL - SYS Maximum 27 letters(one-byte character)
11
680 General Banner advertising display2
ALL - SYS Maximum 27 letters(one-byte character)
11
681 General Display of [BANNER MES-
SAGE] button
ALL 0
SYS 0: Not displayed
1: Displayed* This button enables
the entry of Banneradvertising display 1(08-679) and Ban-ner advertising dis-play 2 (08-680) onthe control panel.
1
682 Userinterface
Offsetting between jobs ALL 1
SYS 0: Invalid1: Valid
1
683 General Duplex printing settingwhen coin controller isused
ALL 1
SYS When the duplex print-ing is short paid with acoin controller, reverseside of the original isnot printed and is con-sidered as a defect
(printing job may becleared). To solve thisproblem, the selectionof printing method isenabled with this set-ting.0: Invalid (Both sides
printed)1: Valid (Only one side
printed)
1
684 General Rebuilding all databases ALL - SYS Rebuilds all databases. 3
685 General Rebuilding all databasesrelated to address book
ALL - SYS Rebuilds all databasesrelated to the AddressBook.
3
686 General Rebuilding all databases
related to log
ALL - SYS Rebuilds all databases
related to the log.
3
689 FAX Adaptation of paper sourcepriority selection
FAX 0
SYS 0: Not subjected forAPS judgment
1: Subjected for APSjudgment
1
690 General HDD formatting ALL -
SYS 2: Normal formatting 7
691 General HDD type display ALL -
SYS 0: Not formatted1: Not used2: Normal format
7
Setting mode (08)
Code Classifi-
cation Items
Func-
tion
Default
RAM Contents Proce-
dure
05/11
-
8/12/2019 es202l_232_282mode08
41/94
June 2004 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/230/232/280/282ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 193
2
692 Mainte-nance
Performing panel calibra-tion
ALL - SYS Performs the calibrationof the pressing position
on the touch panel(LCD screen). The cali-bration is performed bypressing 2 referencepositions after this codeis started up.
1
693 General Initialization of NIC infor-mation
ALL - SYS Returns the value to thefactory shipping defaultvalue.
3
694 General Performing HDD testing ALL - SYS Checks the bad sector. 3
695 General Notifying condition of trialperiod end
PRT/SCN
3
SYS Sets when the end oftrial period is notified.0: On the day it ends1 to 59: n days before
1
696 Scram-
blerboard
Installation of scrambler
board (Option)
ALL 0
- 0: Not installed
1: Installed
2
697 Paperfeeding
Paper type priority PPC 1
SYS Sets the paper type pri-ority during copying.1: Plain paper2: Thick paper 1
1
698 Scram-bler
board
Entering the key code forscrambler board
ALL - - Start up this code andhave the user enter thekey code.Once the key code hasbeen set, this code can-not be set again onsecurity grounds.
5
699 Scram-bler
board
Erasing all data in HDD ALL - - This setting is effectiveonly when the scram-
bler board is installed.
3
701 FAX Destination setting for FAX FAX EUR: 5UC: 4JPN: 0
Other: 1
SYS 0: Japan 1: Asia2: Australia3: Hong Kong4: U.S.A./Canada5: Germany 6: U.K.7: Italy8: Belgium9: Netherlands10: Finland11: Spain12: Austria13: Switzerland14: Sweden15: Denmark16: Norway
17: Portugal18: France19: Greece20: Poland21: Hungary22: Czech23: Turkey24: South Africa25: Taiwan
1
Setting mode (08)
Code Classifi-
cation Items
Func-
tion
Default
RAM Contents Proce-
dure
05/11
-
8/12/2019 es202l_232_282mode08
42/94
e-STUDIO200L/202L/230/232/280/282 June 2004 TOSHIBA TEC CORPORATION All rights reservedERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 194
702 Mainte-nance
Remote-controlled servicefunction
ALL 2
SYS 0: Valid (Remote-con-trolled server)
1: Valid (L2)2: Invalid
1
703 Mainte-nance
Remote-controlled serviceHTTP serverURL setting
ALL - SYS Maximum 256 Bytes 11
704-0 Userinterface
Interruption ofstapling oper-ation (no sta-ple)
Copying ALL 1
SYS 0: Continues printingby switching sortsetting
1: Interrupts printing
4
704-1 Printing /BOX print-ing
ALL 1
SYS 0: Continues printingby switching sortsetting
1: Interrupts printing
4
707 Mainte-nance
Remote-controlled serviceHTTP initially-registered
serverURL setting
ALL https://device.
mfp-support.com:443/device/firstregist.ashx
SYS Maximum 256 Bytes 11
710 Mainte-nance
(Remote)
Short time interval settingof recovery from Emer-gency Mode
ALL 24
SYS Sets the time interval torecover from the Emer-gency Mode to the Nor-mal Mode.(Unit: Hour)
1
711 Mainte-nance
(Remote)
Short time interval settingof Emergency Mode
ALL 60
SYS Unit: Minute 1
715 Mainte-
nance
Remote-controlled service
periodical polling timing(Hour/Hour/Minute/Minute)
ALL 1230 SYS 0 (0:00) to 2359 (23:59) 1
716 Mainte-nance
Remote-controlled serviceWriting data of self-diag-nostic code
ALL 0
SYS 0: Prohibited1: Accepted
1
717 Mainte-nance
Remote-controlled serviceresponse waiting time(Timeout)
ALL 3
SYS Unit: Minute 1
718 Mainte-nance
Remote-controlled serviceinitial registration
ALL 0
SYS 0: OFF1: Start2: Only certification is
scanned3: Satellite communic-
tion starts
1
719 Mainte-nance
Remote-controlled servicetentative password
ALL - SYS Maximum 10 letters 11
720 Mainte-nance
Status of remote-con-trolled service initial regis-tration(Display only)
ALL 0
SYS 0: Not registered1: Registered
2
721 Mainte-nance
Service center call function ALL 2
SYS 0: OFF1: Notifies all service
calls2: Notifies all but
paper jams
1
Setting mode (08)
Code Classifi-
cation Items
Func-
tion
Default
RAM Contents Proce-
dure
07/04
-
8/12/2019 es202l_232_282mode08
43/94
June 2004 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/230/232/280/282ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 195
2
723 Mainte-nance
Service center callHTTP server URL setting
ALL - SYS Maximum 256 letters 11
726 Mainte-nance
HTTP proxy setting ALL 1
SYS 0: Valid1: Invalid
1
727 Mainte-nance
HTTP proxy IP addresssetting
ALL - SYS 000.000.000.000-255.255.255.255(Default value000.000.000.000)
11
728 Mainte-nance
HTTP proxy port numbersetting
ALL 0
SYS 1
729 Mainte-nance
HTTP proxy ID setting ALL - SYS Maximum 30 letters 11
730 Mainte-nance
HTTP proxy password set-ting
ALL - SYS Maximum 30 letters 11
731 Mainte-nance
HTTP proxy panel display ALL 1
SYS 0: Valid1: Invalid
1
732 Mainte-nance
(Remote)
Automatic ordering func-tion of supplies
ALL 3
SYS 0: Ordered by FAX1: Ordered by E-mail2: Ordered by HTTP3: OFF
1
733 Mainte-nance
(Remote)
Automatic ordering func-tion of suppliesFAX number
ALL - SYS Maximum 32 digitsEnter hyphen with the[Monitor/Pause] button
11
734 Mainte-nance
(Remote)
Automatic ordering func-tion of suppliesE-mail address
ALL - SYS Maximum 192 lettersList: 256 digits
11
738 Mainte-nance
(Remote)
Automatic ordering func-tion of suppliesUser's name
ALL - SYS Maximum 50 letters 11
739 Mainte-nance
(Remote)
Automatic ordering func-tion of suppliesUser's telephone number
ALL - SYS Maximum 32 digitsEnter hyphen with the[Monitor/Pause] button
11
740 Mainte-nance
(Remote)
Automatic ordering func-tion of suppliesUser's E-mail address
ALL - SYS Maximum 192 lettersList: 256 digits
11
741 Mainte-nance
(Remote)
Automatic ordering func-tion of suppliesUser's address
ALL - SYS Maximum 100 letters 11
742 Mainte-nance
(Remote)
Automatic ordering func-tion of suppliesService number
ALL 0
SYS Maximum 5 digits 11
743 Mainte-nance
(Remote)
Automatic ordering func-tion of suppliesService technician's name
ALL - SYS Maximum 50 letters 11
744 Mainte-nance
(Remote)
Automatic ordering func-tion of supplies
Service technician's tele-phone number
ALL - SYS Maximum 32 digitsEnter hyphen with the
[Monitor/Pause] button
11
745 Mainte-nance
(Remote)
Automatic ordering func-tion of suppliesService technician's E-mailaddress
ALL - SYS Maximum 192 lettersList: 256 digits
11
746 Mainte-nance
(Remote)
Automatic ordering func-tion of suppliesSupplier's name
ALL - SYS Maximum 50 letters 11
Setting mode (08)
Code Classifi-
cation Items
Func-
tion
Default
RAM Contents Proce-
dure
05/11
-
8/12/2019 es202l_232_282mode08
44/94
e-STUDIO200L/202L/230/232/280/282 June 2004 TOSHIBA TEC CORPORATION All rights reservedERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 196
747 Mainte-nance
(Remote)
Automatic ordering func-tion of supplies
Supplier's address
ALL - SYS Maximum 100 letters 11
748 Mainte-nance
(Remote)
Automatic ordering func-tion of suppliesNotes
ALL - SYS Maximum 128 letters 11
758 Mainte-nance
(Remote)
Information about suppliesPart number of toner car-tridge
ALL - SYS Maximum 20 digits 11
759 Mainte-nance
(Remote)
Information about suppliesOrder quantity of toner car-tridge
ALL 1
SYS 1
760 Mainte-nance
(Remote)
Information about suppliesCondition number of tonercartridge
ALL 1
SYS 1
764 Mainte-nance
(Remote)
Automatic ordering sup-plies
Result table printout
ALL 1
SYS 0: OFF1: Always
2: ON Error
1
765 Mainte-nance
(Remote)
Automatic ordering sup-pliesDisplay
ALL EUR: 2UC: 0JPN: 2
SYS 0: Valid (FAX/InternetFAX)
1: Valid (FAX/InternetFAX/HTTP)
2: Invalid
1
767 Mainte-nance
(Remote)
Service Notification setting ALL 0
SYS Enables to set up to 3E-mail addresses to besent.(08-768, 777, 778)0: Invalid1: Valid (E-mail)2: Valid (FAX)
1
768 Mainte-nance
(Remote)
Destination E-mail address ALL - SYS Maximum 192 letters 11
769 Mainte-nance
(Remote)
Total counter informationtransmission setting
ALL 0
SYS 0: Invalid1: Valid
1
770 Mainte-nance
(Remote)
Total counter transmissiondate setting
ALL 0
SYS 0 to 31 1
771 Mainte-nance
(Remote)
PM counter notification set-ting
ALL 0
SYS 0: Invalid1: Valid
1
772 Mainte-nance
Dealer's name ALL - SYS Maximum 100 lettersNeeded at initial regis-tration
11
773 Mainte-nance
Login name ALL - SYS Maximum 20 lettersNeeded at initial regis-tration
11
774 Mainte-nance
(Remote)
Display setting of [ServiceNotification] button
ALL EUR: 0UC: 1JPN: 0
SYS 0: Not displayed1: displayed
1
775 Mainte-nance
(Remote)
Sending error contents ofequipment
ALL 0
SYS 0: Invalid1: Valid
1
776 Mainte-nance
(Remote)
Setting total counter trans-mission interval(Hour/Hour/Minute/Minute)
ALL - SYS 1
Setting mode (08)
Code Classifi-
cation Items
Func-
tion
Default
RAM Contents Proce-
dure
07/04
-
8/12/2019 es202l_232_282mode08
45/94
June 2004 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/230/232/280/282ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 197
2
777 Mainte-nance
(Remote)
Destination E-mail address2
ALL - SYS Maximum 192 letters 11
778 Mainte-nance
(Remote)
Destination E-mail address3
ALL - SYS Maximum 192 letters 11
780 Mainte-nance
Remote-controlled servicepolling day selectionDay-1
ALL 0
SYS 0: OFF1 to 31: 1st to 31st of amonth
1
781 Mainte-nance
Remote-controlled servicepolling day selectionDay-2
ALL 0
SYS 0: OFF1 to 31: 1st to 31st of amonth
1
782 Mainte-nance
Remote-controlled servicepolling day selectionDay-3
ALL 0
SYS 0: OFF1 to 31: 1st to 31st of amonth
1
783 Mainte-nance
Remote-controlled servicepolling day selection
Day-4
ALL 0
SYS 0: OFF1 to 31: 1st to 31st of a
month
1
784 Mainte-nance
Remote-controlled servicepolling day selectionSunday
ALL 0
SYS 0: Invalid1: Valid
1
785 Mainte-nance
Remote-controlled servicepolling day selectionMonday
ALL 0
SYS 0: Invalid1: Valid
1
786 Mainte-nance
Remote-controlled servicepolling day selectionTuesday
ALL 0
SYS 0: Invalid1: Valid
1
787 Mainte-nance
Remote-controlled servicepolling day selectionWednesday
ALL 0
SYS 0: Invalid1: Valid
1
788 Mainte-nance
Remote-controlled servicepolling day selection
Thursday
ALL 0
SYS 0: Invalid1: Valid
1
789 Mainte-nance
Remote-controlled servicepolling day selectionFriday
ALL 0
SYS 0: Invalid1: Valid
1
790 Mainte-nance
Remote-controlled servicepolling day selectionSaturday
ALL 0
SYS 0: Invalid1: Valid
1
794 Mainte-nance
Information of supplies set-ting of toner cartridge
ALL 0
SYS 0: Invalid1: Valid
1
796 Mainte-nance
Remote-controlled servicelengthened interval polling(End of month)
ALL 0
SYS 0: Invalid1: Valid
1
797 Mainte-nance
Firmware download ALL 0
SYS 0: Accepted1: Prohibited
1
798 General Notifying address of trial
period end
PRT/
SCN
3
SYS Sets where the end of
the trial period is to benotified.0: OFF 1: User 2: Service center3: User and service
center
1
Setting mode (08)
Code Classifi-
cation Items
Func-
tion
Default
RAM Contents Proce-
dure
06/09
-
8/12/2019 es202l_232_282mode08
46/94
e-STUDIO200L/202L/230/232/280/282 June 2004 TOSHIBA TEC CORPORATION All rights reservedERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 198
799 General Forcible end of trial period PRT/SCN
- SYS [CANCEL]: Cancel[EXECUTION]: Forc-
ible endWhen the Forcible endof trial period is per-formed, 0 is set in thecode (08-673) to end upthe trial period forcibly.
3
800-0 Fuser Temperaturecontrol lowerlimit(OHP film)
Centerthemistor
ALL 8
M 0: 130C 1: 135C2: 140C 3: 145C4: 150C 5: 155C6: 160C 7: 165C8: 170C 9: 175C10: 180C11: 185C12: 120C
4
800-1 Sidethemistor
ALL 6
M 4
801-0 Fuser Temperature
control lowerlimit(Thick paper1)
Center
themistor
ALL 8
M 0: 130C 1: 135C
2: 140C 3: 145C4: 150C 5: 155C6: 160C 7: