esab hand scarfing torches - weldingsupply.com · 53 esab oxweld® c-66-1400, c-63, & pm-gst n...
TRANSCRIPT
52
ESAB
OXWELD® C-59, C-59-4, &C-65 Scarfing Torchesn Scarfing widths from 2-1/2 in. to 4-1/2 in.n Single lever actuated torch controln High capacity emergency hand cuttingn Models for 1700 & 1800 series nozzlesn For medium pressure fuel gases except
acetylenen C-59 available with or without rod feed
STEEL INDUSTRY PRODUCTSHAND SCARFING TORCHES
SpecificationsModel Scarfing Range - in. Nozzle SeriesC-59 2-1/2 - 3-3/16 1800C-59-4 3 - 4-1/2 1700C-65 2-1/2 - 3-3/16 1800
Ordering InformationModel Part No. Length HeadC-59-36-75 02X67 36 in. 75 deg.C-59-42-75 02X91 42 in. 75 deg.C-59-48-75 02X68 48 in. 75 deg.C-59-48-75NRF 02X92 48 in. 75 deg.C-59-48-180NRF 5278749 48 in. 180 deg.C-59-56-75NRF 526438 56 in. 75 deg.C-59-60-180NRF 5278751 60 in. 180 deg.C-59-72-75 5278595 72 in. 75 deg.C-59-72-180NRF 5278980 72 in. 180 deg.C-59-84-75 5278988 84 in. 75 deg.C-59-84-180NRF 5278667 84 in. 180 deg.C-59-96-75NRF 5278964 96 in. 75 deg.C-59-96-180NRF 5279110 96 in. 180 deg.C-59-108-75NRF 5278890 108 in. 75 deg.C-59-108-90NRF 2217963 108 in. 90 deg.C-59-108-180NRF 5279250 108 in. 180 deg.C-59-120-75NRF 2217964 120 in. 75 deg.C-59-120-90NRF 2217965 120 in. 90 deg.C-59-120-180NRF 2119320 120 in. 180 deg.C-59-144-75NRF 2217966 144 in. 75 deg.C-59-144-90NRF 2217967 144 in. 90 deg.C-59-144-180NRF 2217968 144 in. 180 deg.C-59-4-42-75 687861 42 in. 75 deg.C-59-4-48-75 687862 48 in. 75 deg.C-65-36-75 27X46 36 in. 75 deg.C-65-42-75 27X47 42 in. 75 deg.C-65-48-75 27X48 48 in. 75 deg.
Note: NRF - No Rod Feed
AccessoriesRiding Skid AssemblyC-59 & C-65 Only - Part No. 5279716
Hose RequirementsOxygen - 1/2 in. - "C" SizeFuel Gas - 3/8 in. "B" Size
Replacement HeadsC-59 & C-6575 deg. - Part No. 83Z9790 deg. - Part No. 2117835180 deg. - Part No. 83Z92
C-59-475 deg. - Part No. 686066
C-59-4C-65C-59
53
ESAB
OXWELD® C-66-1400, C-63, & PM-GSTn Fast, efficient scrap cuttingn Reliable emergency hand cutting in production
mill environmentsn Designed for extra heavy-duty operations for long
trouble-free service lifen Fuel gases except acetylene
OXWELD® C-66-1400n Cutting range 3 in. - 28 in.n Torch lengths from 32 in. to 17 ft.n Torches 9 ft. and over have protective outer channeln Off-center 180 deg. head allows kerf to be widened
by rotating torch. Torch can then be inserted intokerf to deepen cut
OXWELD® C-63n Cutting range 9 in. - 60 in.n Separate preheat & cutting oxygen inlets (3-hose)n Off-center 180 deg. head allows kerf to be widened
by rotating torch. Torch can then be inserted into kerfto deepen cut
OXWELD® PM-GSTn PM-GST means Post-Mix Gas Saving Torchn Superior emergency torch capabilityn High stand-off 4 in. - 6 in.n Cutting range 3 in. - 24 in.n Pilot flame mode saves gas in stand-by mode —
ready for immediate usen Uses standard PM-100/PM-200 nozzlesn This torch cannot pierce plate
Ordering InformationSee Torch Selection Table on page 54.
AccessoriesHose RequirementsC-66-1400Oxygen -"C" Size; Fuel "B" Size
PM-GST "B" Size
C-63 Preheat - "B" SizeCut Oxygen - 1/2 in. - "C" Size
Riding Skid AssemblyC-66-1400 - Part No. 2029858C-63 - Part No. 5279716PM-GST - Part No. 22073
STEEL INDUSTRY PRODUCTSHAND CUTTING TORCHES
C-66-1400 PM-GSTC-63
54
ESAB
Model Part No.
C-66-1400-21 in.-75 deg. 22111C-66-1400-21 in.-90 deg. 22112C-66-1400-21 in.-180 deg. 22113C-66-1400-26 in.-75 deg. 22114C-66-1400-26 in.-90 deg. 22115C-66-1400-26 in.-180 deg. 22116C-66-1400-32 in.-75 deg. 718317C-66-1400-32 in.-90 deg. 22117C-66-1400-32 in.-180 deg. 718318C-66-1400-36 in.-75 deg. 22118C-66-1400-36 in.-90 deg. 22119C-66-1400-36 in.-180 deg. 22120C-66-1400-42 in.-75 deg. 718319C-66-1400-42 in.-90 deg. 22121C-66-1400-42 in.-180 deg. 718320C-66-1400-48 in.-75 deg. 718321C-66-1400-48 in.-90 deg. 2120361C-66-1400-48 in.-180 deg. 718322C-66-1400-60 in.-75 deg. 718323C-66-1400-60 in.-90 deg. 22122C-66-1400-60 in.-180 deg. 718324C-66-1400-72 in.-75 deg. 718325C-66-1400-72 in.-90 deg. 22123C-66-1400-72 in.-180 deg. 718326C-66-1400-84 in.-75 deg. 5279011C-66-1400-84 in.-90 deg. 22124C-66-1400-84 in.-180 deg. 5279732C-66-1400-96 in.-75 deg. 2119104C-66-1400-96 in.-90 deg. 2116434C-66-1400-96 in.-180 deg. 5279627C-66-1400-108 in.-75 deg. 5278827C-66-1400-108 in.-90 deg. 22125C-66-1400-108 in.-180 deg. 22126C-66-1400-120 in.-75 deg. 718361C-66-1400-120 in.-90 deg. 22127C-66-1400-120 in.-180 deg. 22128C-66-1400-132 in.-75 deg. 5279507C-66-1400-132 in.-90 deg. 22129C-66-1400-132 in.-180 deg. 22130C-66-1400-144 in.-75 deg. 5279754
STEEL INDUSTRY PRODUCTSTORCH SELECTION TABLE
OXWELD® High Capacity Manual Torches
Model Part No.
C-66-1400-144 in.-90 deg. 2120392C-66-1400-144 in.-180 deg. 2117244C-66-1400-168 in.-75 deg. 22131C-66-1400-168 in.-90 deg. 22132C-66-1400-168 in.-180 deg. 22133C-66-1400-192 in.-75 deg. 2117241C-66-1400-192 in.-90 deg. 22134C-66-1400-192 in.-180 deg. 22135C-66-1400-204 in.-75 deg. 2119325C-66-1400-204 in.-90 deg. 22136C-66-1400-204 in.-180 deg. 22137C-63-60 in.-180 deg. 27X05C-63-60 in.-75 deg. 5279010C-63-72 in.-75 deg. 2117605C-63-72 in.-180 deg. 2219219C-63-84 in.-75 deg. 5279856C-63-84 in.-180 deg. 2116814C-63-96 in.-180 deg. 5279711C-63-120 in.-75 deg. 5278865C-63-120 in.-90 deg. 5279736PM-GST-48 in.-75 deg. 22086PM-GST-48 in.-90 deg. 22094PM-GST-48 in.-180 deg. 22098PM-GST-60 in.-75 deg. 22087PM-GST-60 in.-90 deg. 22095PM-GST-60 in.-180 deg. 22099PM-GST-72 in.-75 deg. 22088PM-GST-72 in.-90 deg. 22096PM-GST-72 in.-180 deg. 22100PM-GST-96 in.-75 deg. 22089PM-GST-96 in.-90 deg. 22097PM-GST-96 in.-180 deg. 22101PM-GST-120 in.-75 deg. 22090PM-GST-120 in.-180 deg. 22102PM-GST-144 in.-75 deg. 22091PM-GST-144 in.-180 deg. 22103PM-GST-192 in.-75 deg. 22092PM-GST-192 in.-180 deg. 22104PM-GST-216 in.-75 deg. 22093PM-GST-216 in.-180 deg. 22105
55
ESAB
OXWELD® C-67-1400n Cuts steel up to 30 in. thickn Low and medium pressure fuel gases except acetylenen Three hose connections — separate cutting oxygenn Straight line, shape, or scrap cuttingn Uses high performance 1400 series nozzlesn Mounts in standard torch holders
OXWELD® C-43En Water-cooledn Cuts steel up to 30 in. thickn Medium pressure fuel gases except acetylenen Three hose connectionsn Straight line, shape, or scrap cuttingn Uses high performance 1400 series nozzles
OXWELD® PM-100 & PM-200n Gases mixed outside torch — safe, trouble-free operationn Cutting range 3 in. - 24 in. with fuel gases except acetylenen Convection, air, or water-cooledn Automatic cut-off or shape cutting operationsn High stand-off keeps high-speed nozzles cleann PM-100 has 1-3/8 in. dia. barrel, PM-200 has 2 in. barreln Post-mix design does not permit piercing of plate
OXWELD® C-60n Cuts steel 25 in. - 60 in.n Medium pressure fuel gases including acetylenen Short and long versions available with or without tube
and rack assembly
OXWELD® C-100 (not shown)n Cuts steel 40 in. - 96 in.n Medium pressure fuel gases except acetylenen Special ball seat nozzles
Ordering InformationModel Part No.
C-67-1400-20 644644C-67-1400-12 2217997C-43E-01 in-line conn. 20826C-43E-02 90 deg. conn. 20827C-43E-03 in-line conn. w/valves 20828PM-100-01 (13-9/16 in.) 2118100PM-100-02 (32-1/16 in.) 2223375PM-200-01 (18 in.) 2222658PM-200-02 (26 in.) 2222925PM-200-03 (33-1/2 in.) 2218800C-60-01 (7 ft. w/rack & tube) 02X76C-60-02 (7 ft. w/o rack & tube) 687541C-60-03 (3 ft. w/o rack & tube) 687990C-60-04 (3 ft. w/rack & tube) 02X89C-100-01 (9 ft. w/o nozzle) 691442C-100-02 (9 ft. w/ #80 nozzle) 6914A42C-100-03 (9 ft. w/ #100 nozzle) 6194B42C-100-04 (5-1/2 ft. w/#100 nozzle) 2028139
STEEL INDUSTRY PRODUCTSMACHINE CUTTING TORCHES
AccessoriesHose RequirementsC-67-1400, C-43E & PM-100 - 3/8 in. "B" sizePM-200 - 3/8 in. "B" preheat oxy & fuel, 1/2 in. "C" sizeC-60 & C-100 - preheat 1/2 in. "C" size, cutting oxygen - 3/4 in. "D" size
C-43E C-60-03C-67-1400
PM-200-02PM-100-01
56
ESAB STEEL INDUSTRY PRODUCTSOXWELD ® SCARFING AND CUTTING NOZZLES
1427 & 1431 Series Cutting Nozzles
Ring Flame Cutting Nozzle
PM-100, 200 & GST Nozzles
1-pc. orSteel Internal External
Model Thickness, in. Size Part No. Sleeve
1400 Series Fuel Gas 12 1427-12 5470099Fit C-43, 66 & 67-1400 14 1427-14 5470144Torches 16 1427-16 5470100
20 1427-20 546019224 1427-24 546016228 1427-28 54601933-6 1431-120 66Z596-10 1431-140 66Z6010-16 1431-160 66Z6116-20 1431-200 66Z6220-24 1431-240 66Z6324-28 1431-280 66Z643-6 Ring Flame 2121848 21194856-10 Ring Flame 2119486 211948510-20 Ring Flame 2119578 2119485
1701 Series Acetylene 24-26 1701-30 08Z78For C-60 Torch Only 28-30 1701-40 08Z80
35-40 1701-50 08Z82
1702 Series Fuel Gas 24-26 1702-30 460064Fit C-60, C-59-4 Torches 28-30 1702-40 596578
35-40 1702-50 547008145-50 1702-60 547008250-60 1702-70 5490062
1808 Series Fuel Gas 20-40 1808-30 65Z44Fit C-59, C-65 Torches 40-50 1808-40 65Z45
50-60 1808-50 65Z46
PM Nozzles 3-6 PM-120-85 2118702Fit PM-100, 200 & 6-10 PM-140-85 2118701GST Torches 6-10 PM-110-200 2118707
10-16 PM-160-85 211870010-24 PM-160-135 2118703
C-100 Nozzles 60-76 C-100-80 69144676-96 C-100-100 691448
1806 Series Scarf width 1806-62 15X44Fits C-59 2-1/4 in. - 3-3/16 in.
1809 Series Scarf width 1806-62 15X70Fits C-65 2-1/4 in. - 3-3/16 in.
1705 Series Scarf width 1705-80 686068Fits C-59-4 3 in. - 4-1/2 in.(not shown)
1808 Series Cutting Nozzles
1806 Series Scarfing Nozzles
1809 Series Scarfing Nozzles
1701 & 1702 Series Cutting Nozzles
57
ESAB
Maximum Maximum Inlet and RatedInlet Delivery Outlet Capacity
Gas Service Model Part No. Pressure - PSIG Pressure - PSIG Connection CFH
Oxygen R-52 20A16 350 150 3/4 in. NPT 10,000Oxygen R-83 2103822 350 150 2 in. NPT 40,000Acetylene R-5210 524193 15 12 3/4 in. NPT 2,000Fuel Gas R-84 2103957 150 40 3/4 in. NPT 8,000Oxygen (2 stage) R-601 689247 350 90 3 in. NPT 150,000Oxygen (1 stage) R-602 2112142 350 150 3 in. NPT 150,000Fuel Gas (1 stage) R-603 05X25 15 13 3 in. NPT 20,000Note: In most instances, capacity is much higher than listed. This will depend upon outlet pipe/hose restrictions.Consult ESAB for recommendations.
OXWELD® High Capacity IndustrialGas Regulatorsn Pilot operation controls delivery pressure within 3%
of maximum rated pressure if operated at more than10% capacity
n High flow capacity up to 200,000 cfh for mill, foundry,and other industrial applications requiring consistentprocess control
n Where demand exceeds flow of a single regulator,multiple units can be installed in parallel
R-602
STEEL INDUSTRY PRODUCTSREGULATORS/REGULATION PANELS
OXWELD® Regulation Panelsn OSHA approved station regulation for oxy-fuel torch usen Two and three outlet versionsn Portable or permanent process gas distributionn Include all valves, safety devices, and filter for reliable long lifen Standard-Flow and High-Flow versions
Cut Oxy P.H. Oxy P.H. Fuel Inlet Connections Outlet ConnectionsModel Part No. Regulator Regulator Regulator Oxy Fuel Cut Oxy P.H. Oxy & Fuel
Standard-FlowTwo Outlet 2224539 R-5704 R-5702 3/4 in. NPT 1/2 in. NPT "C" Size "B" SizeThree Outlet 2224540 R-5704 R-5702 R-5702 3/4 in. NPT 1/2 in. NPT "C" Size "B" Size
High-FlowTwo Outlet 2119101 R-52 R-76-75-025 3/4 in. NPT 1/2 in. NPT "C" Size "B" SizeThree Outlet 2116395 R-52 R-76-150-024 R-76-75-025 3/4 in. NPT 1/2 in. NPT "C" Size "B" Size
Specifications and Ordering Information
Specifications and Ordering Information
R-52
2-HoseHigh Flow Panel
P/N 2119101
2-HoseStandard Flow Panel
P/N 2224539
58
ESAB STEEL INDUSTRY PRODUCTSPROTECTIVE DEVICES
Specifications and Ordering InformationMaximum Rated Pressure Relief
Gas Inlet Flow Drop Max Inlet & Outlet Valve ShippingService Model Part No. Pressure PSIG Cap. CFH @300 CFH Height Dia. Connections Conn. Weight
Acetylene H-14 11P31 15 300 2.5 psig 12-3/4 in. 2-7/8 in. 1/2 in. NPTF 3/4 in. NPTF 12 lb.Fuel Gas H-16 13P16 13-28 300 2.5 psig 12-3/4 in. 2-7/8 in. 1/2 in. NPTF 3/4 in. NPTF 12 lb.Fuel Gas H-16 2120396 50-100 300 2.5 psig 12-3/4 in. 2-7/8 in. 1/2 in. NPTF 3/4 in. NPTF 12 lb.
Inlet Capacity - CFHPressure - PSIG H-18 H-19 H-12-6M
3 600 1800 36005 700 2000 4000
10 800 2500 500025 1400 4000 800050 2200 6500 13,00075 3100 9000 18,000
100 3900 11,500 23,000
Specifications and Ordering InformationMaximum Rated Pot. Relief
Gas Part Inlet Flow CFH Max. Inlet & Outlet Valve ShippingService Model No. Pressure - PSIG @15 PSI Height Dia. Connections Conn. Weight
Acetylene H-2 04B13 15 500 26 in. 11 in. 3/4 in. NPTF 3/4 in. NPTF 88 lb.Acetylene H-4 04B84 15 1000 19 in. 13 in. 1-1/4 in. NPTF 3/4 in. NPTF 150 lb.Acetylene H-9 03P78 15 3000 38 in. 13 in. 2 in. NPTF 3/4 in. NPTF 180 lb.Acetylene H-11-6M 06P53 15 6000 62 in. Triple Tube 3 in. NPTF 3/4 in. NPTF 405 lb.Fuel Gas H-18 12P02 20 1000 19 in. 13 in. 1-1/4 in. NPTF 3/4 in. NPTF 150 lb.Fuel Gas H-18 09P68 100 1000 19 in. 13 in. 1-1/4 in. NPTF 3/4 in. NPTF 150 lb.Fuel Gas H-19 11P99 20 3000 38 in. 13 in. 2 in. NPTF 3/4 in. NPTF 180 lb.Fuel Gas H-19 09P69 125 3000 38 in. 13 in. 2 in. NPTF 3/4 in. NPTF 180 lb.Fuel Gas H-12-6M 11P98 20 6000 62 in. Triple Tube 3 in. NPTF 3/4 in. NPTF 405 lb.Fuel Gas H-12-6M 09P70 100 6000 62 in. Triple Tube 3 in. NPTF 3/4 in. NPTF 405 lb.
Fuel Gas Flow Capacities For Inlet Pressures OtherThan 15 PSIG
OXWELD® Hydraulic Protective Devicesn Rated fuel gas capacities to 23,000 cfh @ 100 psign Meets OSHA requirements and NFPA Standards/UL Listedn Heavy-duty welded steel shell constructionn Models for all fuel gasesn Flashback and backflow protection to satisfy OSHA Regulationsn Contains relief valve
H-18 H-12-6M
H-14
OXWELD® H-14 & H-16 Dry Type Protective Devicesn Rated fuel gas capacities to 300 cfhn Meets OSHA requirements and NFPA Standards/UL Listedn No liquid — requires no filling or cold weather maintenancen Heavy-duty steel shell constructionn Models for all fuel gasesn Ideal for station service or portable outlet headersn Flashback and backflow protection to satisfy OSHA Regulationsn Contains relief valve
59
ESAB
AccessoryPowder
Type Attachment Type Torch Part No. Valve
Single-Tube C-37, C-39, C-67 (mechanized) 60Y98 not req'dand other 1500 Series models
Dual-Tube C-66-1400 (manual) 2030210 not req'dC-63 (manual) 5278721 not req'dC-43 (mechanized) 2116229 not req'dC-60 (mechanized) 10Y95 16X36C-100 (mechanized) 2028213 16X36
Multi-Jet* C-31, C-32, C-66 (manual with 61Y59 (1500-ACA-2) not req'd75 deg. head) 61Y60 (1500-ACA-1) not req'dC-31, C-32, C-66 (manual with 61Y61 (1500-ACA-2) not req'd60 deg. head) 61Y58 (1500-ACA-1) not req'dC-37, C-39, C-67 (mechanized) 61Y56 (1500-ACA-2) not req'd
61Y57 (1500-ACA-1) not req'd*Note: Select the correct model based on the type nozzle being used.
The 1500-ACA-2 attachment is limited to one piece nozzles having a tapered front end as follows:1514 Series through size 41563 Series through size 61564 Series1565 Series through size 3The 1500-ACA-1 attachment accepts all other 1500 Series Cutting Nozzles.
Steel ExternalGas Service Description Thickness Size Part No. Sleeve
Acetylene 1418-8 Up to 3 in. 8 65Z02 71Z781418-10 Up to 5 in. 10 65Z03 71Z781418-12 6 in. 12 65Z04 71Z781418-14 Up to 9 in. 14 65Z05 71Z78
Fuel Gas 1430-10 Up to 5 in. 10 66Z33 71Z781430-16 Up to 8 in. 16 66Z34 71Z781430-20 Up to 10 in. 20 66Z35 71Z78
Note: Nozzle and sleeve required for complete assembly.
Model Part No. Length Head Ship Weight InletConnections
AC-4-28-75 02X60 28 in. 75 in. 22 lb. 3/8 in. - "B" sizeAC-4-44-75 28X65 44 in. 75 in. 30 lb. 3/8 in. - "B" size
STEEL INDUSTRY PRODUCTSPOWDER EQUIPMENT
OXWELD® Powder CuttingEquipmentn Rapidly cut any thickness stainless steel,
cast iron and high alloy steelsn As simple to use as regular cutting torchesn Manual or mechanized versions availableAC-4 Powder Cutting Hand Torchesn Self Containedn Capacity 10 in. thick stainlessn Acetylene or fuel gasn Single lever control
Specifications and Ordering Information
Specifications and Ordering InformationAC-4 Powder Cutting Nozzlesn Powder flows between sleeve and nozzlen Made from pure copper - rapid heat transfern Chrome plated powder flow surfaces for protection
from wear
Powder Attachmentsn Models to fit all popular OXWELD® torchesn Single- & Dual-Tube for straight-line cuttingn Multi-Jet for shape cutting applications
Specifications and Ordering Information
AC-4 Torch
AC-4 Nozzle
60
ESAB STEEL INDUSTRY PRODUCTSPOWDER EQUIPMENT
OXWELD® Powder Dispensersn Heavy welded steel constructionn Hinged lid with heavy-duty closuresn Inlet gas filter and moisture trapn Pop-off safety valven Screen filter sifts out lumps of powdern Manual and automatic models
Manual Powder Dispensersn Manual 100 and 400 lb. dispensers designed for
general powder cutting or lancing operationsn Can be used with any powder torch, powder lance, and
powder cutting attachment
Automatic Powder Dispensern Automatic 400 lb. powder dispenser designed for
automatic or semi-automatic machine cuttingn Equipped with electric powder valve and nitrogen gas
purgingn Controlled by interfacing the cutting machines logic with
the dispenser powder and gas controlsn Can be used with any powder torch, lance, or cutting
attachment
Specifications and Ordering InformationPowder Powder Nitrogen Nitrogen Operating ReliefCapacity Part Flow Inlet Flow Pressure Pressurelbs. No. Type lb./hr. PSIG CFH PSIG PSIG
100 2217290 Manual 15-100 40 50-200 5-40 45400 2223093 Manual 15-100 40 50-200 5-40 45400 2220388 Automatic 15-100 40 50-200 5-40 45
Options and AccessoriesHigh Precision Cutting Ejector
For fine control and maximum economywhen cutting materials less than 2 in. thick. ............ 65Z49
Powder Supply HoseFitted clear vinyl hose 50 ft. long. ........................ 2119297
Inlet Nitrogen HoseFitted black rubber hose 110 ft. long. .................. 2211347
Cover Gaskets100 lb. Dispenser ................................................ 5279191 400 lb. Dispenser ............................................... 2225204
Powder Dispenser - P/N 2217290
61
ESAB
Model Part No. Relief Pressure - PSIG
RV-27 11P62 15RV-28 11P63 20RV-29 11P64 25-75RV-30 20069D10 45
Gas Service Size Part No. Type
Oxygen 1/4 in. 86W02 NPTF-Poppet1/2 in. 2030506 NPTF-Poppet3/4 in. 188W20 NPTF-Poppet1 in. 2102243 NPTF-Poppet1-1/2 in. 2117071 NPTF-Swing
Fuel Gas 1/4 in. 86W02 NPTF-Poppet3/8 in. 719151 NPTF-Swing1/4 in. 2028762 NPTF-Swing3/4 in. 2028759 NPTF-Swing
STEEL INDUSTRY PRODUCTSFILTERS, CHECK/RELIEF/DUAL SHUTOFF VALVES
High Capacity Line Filtersn Remove dirt, scale and foreign materials from pipelinesn Prevent damage to valves, regulators, torches, etc.n Reduce possibility of combustible particles igniting in pipelinen 40 micron rating on 1 in. and 2 in. sintered bronze elementsn 140 mesh screen on 3 in. screen filter
Heavy Duty Check/Relief/Dual Shut-off ValvesCheck Valvesn Wide assortment of NPTF Thread Check Valvesn For oxygen and fuel gas service
Relief Valvesn Use with any non-corrosive, non-toxic industrial gasn Easily maintained for long lifen Equipped with 3/4 in. NPT male inlet, 3/4 in. NPTfemale outlet
Dual Shut-off Valven High flown Manually controlledn 3/4 in. NPTF inlet/outletn Delayed action - sequence can be changed
Model Part No. Flow Capacity - CFH
V-21 07X67 Oxygen - 10,700 @ 100 psiFuel Gas - 3,300 @10 psi
1-1/2 in. SwingCheck Valve
RV-28
Maximum MaximumOperating Flow Overall Body
Gas Service Size Part No. Pressure PSIG CFH Length Diameter Weight
Oxygen 1 in. NPT 2116734 350 20,000 7-3/8 in. 2-5/8 in. 5-1/2 lb.Fuel Gas 1 in. NPT 2116339 350 20,000 7-38 in. 2-5/8 in. 5-1/2 lb.Oxygen 2 in. NPT 2116735 350 100,000 14 in. 3-1/2 in. 13-1/2 lb.Fuel Gas 2 in. NPT 2116363 350 100,000 14 in. 3-1/2 in. 13-1/2 lb.Oxygen 3 in. NPT 976823 350 200,000 12-1/8 in. 3-1/2 in. 80 lb.
2 in. Filter
V-21
62
ESAB STEEL INDUSTRY PRODUCTSFUEL GAS MANIFOLDS, FLOWMETER
OXWELD® M-2 and M-4 Fuel Gas Manifoldsn Greatly reduce cylinder-changing and handling labor — lower costsn Less time lost due to cylinder-changing — greater productivityn Designed for use with large acetylene or fuel gas cylinders with
vertical CGA 510 outlet connections
M-2 Manifoldn Portable — complete with control assembly and 4 leadsn Each lead has flash arrestor and check valven Four plug-and-chain assemblies — can be used with up to 5cylinders
M-4 Manifoldn Stationary — complete with heavy-duty regulator, OXWELD® pot
type hydraulic back pressure valve, two relief valves,preassembled header with individual shut-off valves for each
cylinder position, four leads and mounting bracketsn Optional extensions available for accommodating up to 14 cylinders
L-21 Critical Orifice FlowmeterP/N 21X22
M-4 Stationary Manifold
M-2 Portable Manifold
Ordering InformationModel Gas Service Part No.M-4 Acetylene 04B40M-4 Fuel Gas 20425M-2 Acetylene & Fuel Gas 3664A00M-2 Without leads 5320A00
Options and AccessoriesM-4, One-Cylinder Extension, right hand ........................ 04B81M-4, One-Cylinder Extension, left hand .......................... 04B82M-4, Two-Cylinder Extension, right hand ......................... 28R36M-4, Two-Cylinder Extension, left hand ........................... 28R37M-4, Three-Cylinder Extension, right hand ...................... 28R26M-4, Three-Cylinder Extension, left hand ........................ 28R27M-2 & M-4, Spare Cylinder Lead, with Flash Arrestor ..... 13B72
OXWELD® L-21 Critical Orifice FlowmeterDesigned to maintain gas flows to many different types ofapparatus for accurate flow control. By easily and quicklychanging the orifice plate, flow ranges from 10 to 6000 CFHare available. The L-21 carries two gauges, one shows thepressure upstream of the orifice plate, the other showsdownstream pressure. As long as the downstream pressure(absolute) is less than half the upstream pressure (abso-lute), the flow through the L-21 can be accuratelydetermined from the upstream pressure. For each of thenine orifice plates, a straight-line graph in the instructionliterature shows flow/pressure relationship.
Note: "Absolute" pressure is gauge pressure plus 15 psi.
n Maintains fixed, known gas flows to apparatus
n Nine orifice plates to cover a wide range of flowsn Heavy-wall brass constructionn Low costn Replaceable filter
63
ESAB STEEL INDUSTRY PRODUCTSOXWELD ® LANCE VALVES
V-24 Oxygen Lance Valven Reliable lancing for steel mill, foundry,
production, and scrapping applicationsn Lever-operated valve for dependable
ease-on and quick shut-off of oxygenn Quick connect pipe chuck grips pipe firmlyn Neoprene seals prevent leakage around lance pipen Compact and durablen Uses schedule 40 black iron pipe
Powder Lance Valve (not shown)n Effectively lances non-ferrous materials including refractoriesn Uses reliable V-24 Lance Valve for oxygen controln Separate quick acting powder on-off valven Complete with spark shield to protect operator from molten spattern Uses schedule 40 black iron pipe
Ordering InformationPart No.
"C" Size "B" SizeModel Connections Connections
V-24 Oxygen Lance Valve Only 06X78 -------V-24 Oxygen Lance Valve - 1/8 in. Holder 9728D65 2218939V-24 Oxygen Lance Valve - 1/4 in. Holder 9728A65 2218938V-24 Oxygen Lance Valve - 3/8 in. Holder 9728B65 2218937V-24 Oxygen Lance Valve - 1/2 in. Holder 9728C65 ------Powder Lance Valve 2121988 ------
AccessoriesHose requirements - "C" size (CGA-024) - 1/2 in., "B" size (CGA-022) - 3/8 in.
V-24
Nominal Oxygen Flow (CFH) through 10 ft. Schedule 40 Pipe Inlet Pipe SizePressure (with no internal obstructions)PSIG 1/8 in. 1/4 in. 3/8 in. 1/2 in.
40 1,200 2,350 2,800 8,50060 700 3,400 5,800 11,00080 2,200 4,450 7,900 13,500
100 2,700 5,500 10,000 16,000
Note : Maximum operating pressure - 100 psig.